INSTALLING WINDOWS IRDA DRIVERS
===============================


REQUIREMENTS

     * HP OmniBook 5700 installed with Windows 3.1 or Windows for Workgroups

     * HP OmniBook 5700 IrDA driver.  The driver is located on the OmniBook
       hard disk in C:\OMNIBOOK\DRIVERS\WFW\IRDA.  These files are available
       after finishing the selection of Windows 95 or Windows for Workgroups
       during the pre-install process.  This driver is also located on the 
       HP OmniBook Recovery CD in the \DRIVERS\WFW\IRDA directory.


PROCEDURE

1. Start Windows

2. Go to the File menu and choose Run

3. Enter C:\OMNIBOOK\DRIVERS\WFW\IRDA\SETUP, or where ever the driver install
   resides.

4. A blue screen will be displayed showing the IrMonitor Setup progrm.

5. Press [Next]

6. Accept the default "{Generic built-in infrared on laptop or destop}.  Press
   [Next].

7. Press [Next] to select the maximum communications speed. 

8. Select COM2 as the Physical IR Port.

9. Press [Enter]

10. Click [Next] to accept the default COM4 (Infrared Serial Port) and LPT2
    (Infrared Printer Port).

11. Enter your Computer Name.

12. Continue with the default C:\WINDOWS\IRMON directory.  Press [Enter].
    
13. Exit the setup program.  

14. From File Manager, copy C:\OMNIBOOK\DRIVERS\WFW\IRDA\SERIAL31.386 to 
    C:\WINDOWS\IRMON\SERIAL31.386.  This will overwrite the current file
    at that location.

15. Exit Windows and reboot. 

