   Windows 98, Windows 98 SE, Windows2000, Windows ME

   Introduction:
   -------------
   This document describes the procedure to install Windows 98/98 SE
   Windows 2000 and Windows ME driver for Realtek RTL8139 PCI Fast
   Ethernet adapter.

   Location of Windows 98/98 SE Driver :   \win98\RTL8139.SYS
   Location of Windows 2000 Driver     :   \win2000\RTL8139.SYS
   Location of Windows ME Driver       :   \winme\RTL8139.SYS

(1).Installing driver procedure on Microsoft Win98/Winme:
---------------------------------------------------------------------
      1. When Windows 98/ME is installed, please open " My Computer ", 
         and select " Control Panel " icon.

      2. Select " System " icon, and then select " Device Manager " page.
        
      3. Please remove " ?! PCI Ethernet Controller " device from " ?Other
         Devices " under device list with the " Remove " button.

      4. Please click on the Add New Hardware icon then click " Next " 
         button, click " Next " button one more times.

      5. This Wizard searches for new drivers for " PCI Ethernet 
         Controller ", you have to attempt to locate a driver provided
         by the manufacturer.

      6. Please insert the CD Driver into the CD drive, then click
         " Next " button.

      7. " What do you want Windows to do? ", Please click " search for
         the best driver for your device [Recommended] ", then click 
         " Next " button.

      8. Please click " Specify a location ", then type in 
         " D:\PIA-649\RT-8139\WIN98 " or " D:\PIA-649\RT-8139\WINME, then
         click " Next " button. The path depends on your Operation System. 
         Note: D: is the Drive where CD Driver has been inserted.

      9. The " Realtek RTL8139[A/B/C/8130] PCI Fast Ethernet NIC " will be detected.
         Click " Next " button.

      10. Click " OK " to load netrts5.cat file if the prompts is displayed.

      11. Please insert " Windows 98 CD-ROM " into the CD drive, then click
          " OK " button.
             
      12. Click " Finish " button to complete the installation and
          click " Yes " button to restart your system.


(2).Installing driver procedure on Microsoft Windows2000:
---------------------------------------------------------
      1. When Windows 2000 is installed, please open " My Computer ", 
         and select " Control Panel " icon.

      2. Select " System " icon, and then select " Hardware " page "
         then click " Device Manager " button.

      3. Double click " Network adapters ".

      4. Select "Realtek RTL8139(A) PCI Fast Ethernet Adapter " then press
         right button on your mouse.

      5. Select " Properties ".

      6. Select " Driver " page.

      7. Click " Update Driver " button.
   
      8. Click " Next " button.
 
      9. Select " Search for a suitable driver for my device[recommended] "
         then click " Next " button.

      10. Select " Specify a location " then click " Next " button.

      11. Type in the correct drive and path then click " OK " button.
          For example D:\PIA-649\RT-8139\WIN2000

      12. Select " Install one of the other drivers " then click " Next "
          button.

      13. Select " Realtek RTL8139[A/B/C/8130] PCI Fast Ethernet NIC " then
          clcik " Next " button.

      14. Click " Yes " button to continue the installation then click 
          " Finish " button.     	