INSTALLING WINDOWS PCCARD DRIVERS
=================================


REQUIREMENTS

     * HP OmniBook 2000/5700 installed with Windows 3.1 or Windows for 
       Workgroups

     * HP OmniBook 2000/5700 PCCard drivers.  The drivers are located on
       the OmniBook hard disk in C:\OMNIBOOK\DRIVERS\WFW\PCCARD.  These 
       files are available after finishing the selection of Windows 95 or
       Windows for Workgroups during the pre-install process.  The drivers
       are also located on the HP OmniBook Recovery CD in the
       \DRIVERS\WFW\PCCARD directory.


PROCEDURE

1. Start Windows

2. Go to the File menu and choose Run

3. Enter C:\OMNIBOOK\DRIVERS\WFW\PCCARD\SETUP

4. A blue screen will display the SystemSoft PCCard Driver Setup Program.
   Press Continue.

5. Select HP OmniBook 5700 when prompted to select a platform, then click OK.

6. Remove any PCMCIA devices inserted and select OK to continue the
    installation.

7. Accept The default "2 slots" for PC Card Slot Configuration.

8. Press [Enter]

9. Displayed will be the CardWizard Installation Options, accept the default
   "Express Installation".

10. Press [Enter]

11. The default CardWizard Path is C:\CARDWIZ.  

12. Press [Enter]

13. The setup program will must modify CONFIG.SYS, WIN.INI, and SYSTEM.INI.
    Accept the changes by clicking [YES] at each prompt.

14. Press [NO] when asked if CardWizard should be placed in the Startup Group.

15. Once complete, click [RESTART] to exit Windows and reboot. 

