INSTALLING WINDOWS NT 4.0 VIDEO SUPPORT


Requirements
============
     * HP OmniBook 2000/5700 with Microsoft Windows NT 4.0 installed.

     * HP OmniBook 2000/5700 video drivers.  The drivers are located on the HP
       OmniBook 2000/5700 hard drive in the C:\OMNIBOOK\DRIVERS\NT\VIDEO.40
       subdirectory.  These files are available after finishing the selection
       of Windows 95 or Windows for Workgroups during the pre-install process.
       The drivers are also located on the HP OmniBook 2000/5700 Recovery CD
       in the \OMNIBOOK\DRIVERS\NT\VIDEO.40 directory.

Procedure
=========
1. Open My Computer, then Control Panel.

2. Open Display and go to the Settings tab.

3. Click Display Type then Change.

4. Click Have Disk... in the Change Display windows.

5. Enter the directory location of the Windows NT 4.0 OmniBook 2000/5700 video
   drivers and click OK.
         (i.e. if on the hard drive then C:\OMNIBOOK\DRIVERS\NT\VIDEO.40)

6. Select the Chips Video Accelerator (64300/10 65535/40/45/48/50/54) and
   click OK.

7. Click Yes to confirm.

8. Click OK to accept the driver was installed correctly.

9. Click Close in the Display Type window.  (The new driver will not take
   effect until after Windows NT has restarted.)

10. Click Close in the Display Properties windows.

11. Click Yes to restart the computer.

12. When Windows NT restarts it will inform you that a new graphics driver
    has been installed.  Click OK.

13. Select the desired Color Palette and Desktop area and click Test then OK. 

