---------------------
README.TXT
---------------------

Program Name: Classic Mustang Analyzer
Developer: John Palmisano - ASP
Publisher: John Palmisano Software 
Version: 6.0
Official Release date: June  1, 2000 
Update: None

Please read all of the following carefully before attempting to
install and setup this software program.

Requirements:
=============

Hardware Type - PC
Operating System - Microsoft Windows 95,98,Me,NT 4,Win.2000,or WinXP 
Hard Drive Space - About 2.5 Mb
RAM Memory - Recommended 32 Mb or higher

Video: 
======

Optimized for 800x600 screen resolution and a
24 bit color, 16 million true color palette. It should
display well enough with 256 color resolution, although
some colors may not look quite right. Displays using 16
colors will produce poor results, but should produce a
viewable display.

Sound:
======

Able to utilize a sound card if available to play sound
files, however a sound card is optional and not a  requirement
of program performance. Sound is a minor enhancement and not
a pre-requisite.

Setup/Install: 
==============

A]- Downloaded - If you downloaded this software from the 
    internet or had it sent by email, use these instructions.

1 - Unzip the  CMA.ZIP  or  CMAT.ZIP  file to a temporary folder. 

Example: C:\MYCMATEMP
Files contained in folder:
Setup.exe
Readme.txt

2 - Open the START MENU and go to RUN. 
     RUN  SETUP.EXE  file from the temporary folder.
     Alternately, you could could use the Install New
     Software module in the Control Panel. You can also
     double click the SETUP.EXE file right in the temporary folder.

3 - Use the SETUP.EXE file to install all files. Files cannot be
     copied to a final folder, they must be installed or they will
      not function properly. All files must be installed into the
      same folder. It is highly recommended to accept the default
      folder. If you make a mistake don't panic, the SETUP program
      can be reused and the newly installed files will overlay the
      previously installed files in a seamless way.


B]- Disks or received in the mail or purchased from a reseller.
    
1 - With your computer running and your version of  WINDOWS started.
2 - Insert the first program disk into your floppy disk drive.
3 - Open the START MENU and go to RUN.
4 - Mouse click on the line that reads A:\Setup.exe and
    follow the on screen instructions to complete the installation
    for each disk included in the set. Be sure to install each disk
    to the same folder. It is highly recommended to accept the
    default folder and location. 

    If the A:\Setup.exe line does not appear as a command
    in your RUN box, then BROWSE your floppy drive and mouse click
    on SETUP.EXE to complete the above.


C]- Installing from a CD-ROM.
    
1 - With your computer running and your version of WINDOWS started.
2 - Insert the CD-ROM into your CD-ROM drive. If Autorun is
     switched ON the CD will start, and you may proceed to step four.
     Otherwise proceed to step three.
3 - Open the START MENU and go to RUN. Mouse click on the line that
     reads *D:\setup.exe and follow the on screen instructions.
    *Substitute your CD-ROM drive letter.
     If the D:\setup.exe line does not appear as a command
     in your RUN box, then BROWSE your CD-ROM drive and mouse click
    on [setup.exe] to complete the above.
4 - It is highly recommended to accept the default folder and location. 
5 - When asked if you wish to create a program folder, the recommended answer is YES.
     This will add the program name to the CMA folder on your Program list.
6 - When asked if you want to run the program just installed the recommended answer is NO.
     Answering no will insure that all the programs files continue their installation.
     Wait until until  installation is complete before running any of the program  files.

Avoiding Autorun:
=================

To avoid Autorun left click on your CD-Rom icon in MyComputer and 
choose Explore to view the Extras folder.


Important:
==========

If you have not sent me your email address, please do. All important
notifications of updates or bugs will be sent out in this fashion.
Please go to the CMA website accessible from within the program and
sign up on the mail list server to receive our newsletter. Newsletters
are usually sent out monthly.

Updates:
========

You may download free software and updates from our Website which is
accessable from within the program. As a reminder the URL is below.

http://members.aol.com/johnpalm/cma.html

The Extras folder may be updated by a visit to a special folder located
on the FreeDrive.com virtual hard drive. To access this folder after
using the following URL, you must also register as a FreeDrive member.
Registration is free and you will also be provided with a free virtual hard
drive of your own with which you can share files with others.

CMA FREEDRIVE SHARED FOLDER:
http://www.freedrive.com/ASP/PostFolderShortcut.asp?fsc=2855502


Credit Card Purchases:
======================

Your billing statement will show the name Atlantic Coast Soft-Shop,
DigiBuy, RegNow, Universal, or SWREG as they are our credit card billing and sales agents. 

Trouble:
========

Should you have any problems with the installation of this software
please contact me at EMAIL: JohnPalm@aol.com

Please do not contact me about downloading errors or problems with
using the above software vendors sites. Contact them directly, they
want to help you solve your problem. They are all very reputable and
don't make any money unless your download succeeds.

