		Micro-x Accessor System Version 1.5.1
			By John F. Clark Jr.


Subject :  Instructions To Install The Micro-x Accessor System Version 1.5.1


[Requirments]

{a}. To run the Micro-x Accessor System version 1.5.1, you will need at least a 386
     IBM compatible computer, with at least 4mb of ram, and a color VGA monitor
     with at least 64k of video ram, with 16 video pages.

{b}. Your Memory Manager must provide DPMI host services. Micro-x runs best with
     the CSWDPMI host. You can find the latest version at http://www.delorie.com/djgpp/.


[To Install  Micro-x]
First copy the Micro-x zip file to your Djgpp directory. Then use the
Pkunzip utility to unzip the file. Micro-x should unzip in the
Djgpp/Contrib/Micro-x directory. Below is a listing of required files to
run Micro-x that should be in the jcmx151b.zip file. 
......................................................................
ACCSD15.DAT...................Setup Configuration Data File.
ACCSLNCH.DAT..................Operational Support Data File.
MICROX1.EXE...................Main Accessor Program File.
MXLODER.EXE...................Accessor System Loader and Control Program.
MCSUB1.EXE....................Subaccessor#1 Program File.
MCSUB2.EXE....................Subaccessor#2 Program File.
MCSUB3.EXE....................Subaccessor#3 Program File.
MXLHWS.COM....................Operational Support Service Program.
MICRO-X.DOC...................Accessor System Documentation File.
.......................................................................
(note) Read the Micro-x.doc file before you try and run the Accessor System.
To access the Micro-x Accessor System Editor [ Press the CTRL + E ] Key
combination at the Main Screen of the Accessor System program.
.................................................................


: From John F. Clark  ,  Enjoy Micro-x :

