                   ==========================
                   ADDING SHARP WIZARD OPTION
                   ==========================

ARTICLE-ID: Q106260

The information in this article applies to version 1.0a of Microsoft Schedule+ for Windows.

The following files are included with this utility:

   WIZARD.DLL  (12,272 bytes, dated 10-05-92, 12:00 A.M.)
   README.TXT

 --------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY    |
| ACCOMPANY THIS DOCUMENT (collectively referred to as a Microsoft   |
| Software Library [MSL] file) IS PROVIDED "AS IS" WITHOUT WARRANTY  |
| OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT        |
| LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR        |
| FITNESS FOR A PARTICULAR PURPOSE. The user assumes the entire risk |
| as to the accuracy and the use of this MSL file. This MSL file     |
| may be copied and distributed subject to the following conditions: |
| 1) All text must be copied without modification and all pages must |
| be included; 2) If software is included, all files must be copied  |
| without modification; 3) All components of this MSL file must be   |
| distributed together; and 4) This MSL file may not be distributed  |
| for profit.                                                        |
|                                                                    |
| Copyright 1993-1995 Microsoft Corporation. All Rights Reserved.    |
| Microsoft is a registered trademark of Microsoft Corporation.      |
 ---------------------------------------------------------------------

SUMMARY
=======

Microsoft provides a file, WIZARD.DLL, that is required for exporting and
importing Microsoft Schedule+ information to and from the Sharp Wizard.

For complete information about installing the WIZARD.DLL file, see the "To add the Sharp Wizard option" section below.

MORE INFORMATION
================

To add the Sharp Wizard option
to the Export File Format menu in Schedule+
-------------------------------------------

1. At the MS-DOS command prompt, type the following and press ENTER

      copy <path>:\wizard.dll <destination>

   where <path> is the drive and directory where you ran the self-
   extracting WIZARD.EXE file and <destination> is the drive and
   directory where you want the WIZARD.DLL file to reside. For example,
   if you ran the self-extracting file from the TEST directory on drive D,
   and you want your WIZARD.DLL file to be located in the WINDOWS directory
   on drive C, type the following command:

      copy a:\wizard.dll c:\windows

2. Add the following lines to the SCHDPLUS.INI file residing in the
   WINDOWS directory, then restart Schedule+.

      [Microsoft Schedule+ Importers]
      key1=C:\WINDOWS\WIZARD.DLL

      [Microsoft Schedule+ Exporters]
      key1=C:\WINDOWS\WIZARD.DLL
