=========================================================================
Date:         Sun, 31 Oct 1999 20:47:12 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      Re: What would you do if this happened to you?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> I have carried my Hp200 on El Al quite a few times (as carry on in a "bum
> belt") with no problems and no questions asked.

did you put the bum-belt(+LX) through x-ray or the magnetic detector
door-frame?

the latter, i was told, can delete files :(


 regards from    __o     Nathalie
 avec LX       _(\<._    exercice
 en France    (_)/ (_)   ...petit tour du beau paysage

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 31 Oct 1999 21:41:13 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      for me MAXDOS isn't worth it
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

with my 2meg sram card maxdos for pkunzip is not worth it, because the space
needed for maxdos swap is better used storing "ready to use" files, instead
of zip files

I decided to do the following (until i get a larger flash-card):

1. increase my DOS from 93k to 132k (thanks Longden)
2. wait for the 20meg flash from Mr.!!! (thanks Perniel)

reasoning:

                                memory at dos prompt

                          appt/phone/memo open  ... closed
DOS from Apps                132272                132272
MaxDos from Apps           261200                398608
DOS from Filer                 287376                424784

so, the Filer DOS gives me most at this stage

thanks guys for all the info - seems like computers are easier to understand
than bodies :))

Nathalie

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 31 Oct 1999 23:08:34 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Why 1X speed makes (some) sense.
MIME-version: 1.0

   >There you'll surely have an advantage with the double speed.
   >If you only use PIMs, text editors, and something like that,
   >probably single speed really _saves_ batteries.
   >GTX
   >daniel

And if you use your 200LX for reading email with something like Nettamer,
would the double speed upgrade make a lot of sense versus the reduced
battery usage?


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 06:13:37 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Fluff: Birthdays
Comments: To: GJColeman@CSI.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I graduated from Indiana U. with a degree in Mathemeatics.

CCNY - Biology.  But I dated a math major and then a chemistry major.
Next time it will be someone in home ec! (G)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 17:47:14 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paul Johnson <paulj@SILCHIP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paul Johnson <paulj@SILCHIP.COM.AU>
Subject:      Re: (FLUFF - shared birthdays)
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> On 29 Oct 1999 09:05:41 -0700, Steve Dowell <sdowell@HARRAHS.COM> wrote:
>
> > <snip>
> >         As a reference point, my birthday is Jan. 1st, and in my *life*
> > I have
> >         only met a handfull of folks with my birthday (Jan. 1st, 19XX).
> >         <snip>
> >
> >         My younest son's birthday was on Jan. 1st, 1988. He was the
> > first one born in our town on the new year, and my wife and him were on
> > the front page of the newspaper.
> >
> >         Steve
>
> Way off any topic here but have you had any "contest" in your country to
> "provide" 2000 new years baby?
>
> Here in Norway we had a lot of "competition" from Hotels and others to
> provide free rooms/free stuff for couples to make a new year baby..
>
> --
> Martin Bergvill Narvik, Norway
> -Palmtop friendly sig...
>

Ther has been a very silly competition here in Australia run by a
radio atation (2MMM). They have got a number of couples to try to
conceive (in some very nice hotel rooms paid for by radio station or
hotel) on the right date so that their child will be a "millenium
baby". Sick eh.

Paul.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 02:08:15 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lionel Zuckier <zuckier@AECOM.YU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lionel Zuckier <zuckier@AECOM.YU.EDU>
Subject:      IBM.net --> attglobal.net
In-Reply-To:  <199911010403.XAA03932@post.aecom.yu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Does anyone have experience using a palmtop and the above service provider
to retreive email alone?  How about for www browsing?  Feel free to answer
on or off-line.

Thanks,

LZ

_____________________________________________________

Lionel Zuckier, MD
Nuclear Medicine
Albert Einstein College of Medicine
Bronx, NY 10461

email: zuckier@aecom.yu.edu

_____________________________________________________

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 01:09:27 +0000
Reply-To:     melancon@microgear.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Melancon <melancon@MICROGEAR.NET>
Subject:      Re: Project Management software - information requested please!
In-Reply-To:  <B0AB4DD57CD5D1118A230060975A100534682B@mailhost.thaddeus.com>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Hal,

Did Thaddeus buy all the remaining stock from Experience in Software?  Thanks for making
it available at an attractive price.  I would recommend them as useful thinking aids.



> From:          Hal Goldstein <hal_goldstein@THADDEUS.COM>
> Subject:       Re: Project Management software - information requested please!
> To:            HPLX-L@UCONNVM.UConn.Edu

> We (Thaddeus Computing) sell DOS Project Kickstart in something that we call
> the Creativity Bundle.  It includes Project KickStart, The Art of
> Negotiating, or The Idea Generator Plus plus a book on Creative Thinking.
> See www.palmtoppaper.com and on left click Creative Bundle located under
> Packages after Software.

Best Regards,
Mike Melancon

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 02:30:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lionel Zuckier <zuckier@AECOM.YU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lionel Zuckier <zuckier@AECOM.YU.EDU>
Subject:      Re: HPLX-L Digest - 30 Oct 1999 to 31 Oct 1999 - Special issue
In-Reply-To:  <199911010403.XAA03932@post.aecom.yu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

I have been trying to search on the archives for information about
importing 200LX phonebook data into the netscape addressbook.  I vaguely
recall from an ancient thread that some versions of netscape used to
support this.

forgive me
for being a novice, but it seems that:

1. Mitch's search engine (HTTP://www.palmtop.net/hp-archive/ghindex.html)
is missing a "glimpse" file and is inoperative.

2. Al's database (HTTP://www.sp.uconn.edu/~mchem1/hypermail/ghindex.html)
is not allowing a search of the complete database, but only 2 months.

3. BY THE WAY, DOES ANYONE KNOW WHAT VERSION OF NETSCAPE ALLOWED
IMPORTATION OF 200 LX PHONEBOOK DATA?

Thanks,


Lionel
_____________________________________________________

Lionel Zuckier, MD

email: zuckier@aecom.yu.edu
_____________________________________________________

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 00:16:13 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: What would you do if this happened to you?
In-Reply-To:  <001801bf2427$cc9e15a0$9385fcc1@oemcomputer>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sun, 31 Oct 1999, Nathalie Bugeaud wrote:

> did you put the bum-belt(+LX) through x-ray or the magnetic detector
> door-frame? the latter, i was told, can delete files :(

I've carried my palmtop through the metal detectors often with no loss.
I don't think the palmtop is vulnerable to either x-ray data loss or
magnetic data loss, since it doesn't use magnetic media.  I guess a really
powerful moving magnetic field might conceivably induce current and be
harmful, and on that theory I won't bring my palmtop when I go in for my
head MRI next week, as the MRI uses a powerful magnet.  But it was in the
same room as the machine at my last MRI, and no damage done.

Anybody have any further info on this kind of thing?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 00:18:47 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Why 1X speed makes (some) sense.
In-Reply-To:  <0FKI00M1598UHO@mta4.rcsntx.swbell.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sun, 31 Oct 1999, David Ball wrote:

> And if you use your 200LX for reading email with something like
> Nettamer, would the double speed upgrade make a lot of sense versus
> the reduced battery usage?

Since you could download e-mail a lot faster, load the program faster,
read in the message file quicker, do searches and sorts faster, and
type replies faster, and not have much reduced battery usage anyway, I'd
say the single speed makes little sense for e-mail.  Especially since
reduced online time means lower battery usage anyway...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 10:37:33 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Memo - long lines (Was Re: FLUFF:Cod+Hitler)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 31 Oct 1999 08:35:52 -0800, Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE> wrote:

> Return-Path: <owner-hplx-l@UCONNVM.UCONN.EDU>
>
> Thanks Peniel for helping us,you wrote:

>  > "The problem is that Memo only does word-wrap in its own screen.
The files it creates only have line breaks if you hit Enter.  If you
look ata memo doc with anything else, you'll see VERY long lines."

As I did with the line above.. I use PE and used the Format-Paragraph
to make it look nice in PE which I use.


> OK but your comment raises even more questions,for example
> does really everybody here press enter after every line?

No they do not.. Well I don't.. Because I use PE and not Memo

> If not,Martin must get problems every time someone don't,as he
doesn't use memo.

Well I have no problem _reading_ the messages with Post/lx. But I get
problems when I reply with PE..

> Martin, have you had this problem with long lines before and with
somebody else?

I can not remember. I do not think so. It only gets a problem when I
reply to a message with long lines like yours..

  > And one more question,I have never heard anyone of those I
exchange emails(LX users excluded) with complain about long lines.It is
actually the first time I have heard it and I have emailed with www/lx
for 2.5 years.

Well I do not know how other emailprograms work. I can only comment on
what I see. I tried to use Memo but went back to PE because of the line
length problem. The line(s) above was on one line (looonnng)

Other mailprograms may correct this when you read/reply to messages.

Why don't you use PE for writing and replying? The only other solution
is that you hit Enter when you come to the end of the screen in
Memo..

But if its only me that has problems with your messages don't bother
:-)) . But it takes some time to make your message readable to me in Pe
before I can reply. I have to Use Format_Paragraph on every long line..

If you want help to set up Pe I am sure the list helps. I have a nice
maxdos tip that makes you able to start Sysmgr-Post/lx and start Pe in
a maxdossession from within Post/lx.. I have posted it here before..

Bye

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 31 Oct 1999 21:54:13 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, BOCHE@DE.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ulrich Boche <BOCHE@DE.IBM.COM>
Subject:      Re: FLUFF:Cod+Hitler
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

I don't think he ever had a palmtop.

Regards,
Ulrich

Michael Berrier <Mberri01@AOL.COM> wrote:

Hi,

who is hitler??

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 31 Oct 1999 21:10:15 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, BOCHE@DE.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ulrich Boche <BOCHE@DE.IBM.COM>
Subject:      Re: FLUFF:Cod
Mime-Version: 1.0
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: quoted-printable

Lars,
ja, ich komme aus Deutschland (aus der Gegend von Stuttgart).
Ich angele selbst nicht. Ihr habt viel bessere und einfachere Bedingung=
en
daf=FCr in Schweden als wir hier, denke ich.

Mit freundlichen Gr=FC=DFen
Ulrich

Lars Hedstroem wrote:

>> Angelst du selbst?Du kommst aus Deutschland,nicht wahr?
=

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 03:12:57 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Looking for memory upgrade connector
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi All,

The subject says it all, if you got one handy let me know. I need it to
upgrade a 1MB 100LX ROM version 1.06 to 2MB.




Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 31 Oct 1999 21:11:20 -0500
Reply-To:     theise@netins.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Theodore Heise <theise@NETINS.NET>
Subject:      Re: Memo - long lines

Peniel Romanelli writes:
>
> On Sun, 31 Oct 1999, Lars wrote:
>
> > OK but your comment raises even more questions,for example
> > does really everybody here press enter after every line?
>
> Somehow I doubt it  8-)

Well, it may be weird, but I use Memo in the smallest font and hit
Enter whenever a line comes within an inch or so of the right edge
of the screen.

Ted

--
Theodore Heise     <theise@netins.net>     West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 06:54:21 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill 1 <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE>
Subject:      Re: Noka 7110 & Www/lx...can't wait..
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Martin wrote:

"I am afraid not.. The only phone I have seen with a "fold" up
screen isthe Ericsson R380. It has a big screen below the keypad. Youcan=
 foldthe keyboard away use a pen to enter text and stuff as a Palmor
something..
Is this the phone you are talking about?"

No,Nokia has launched a mobilephone with a different and more

heavier foldup screen,they launched it even before Ericsson's.

This phone you foldup in the middle,just as you fold up your LX

and hokus pokus there is a screen with a real keyboard as well.


"I can understand some Deutsch, but my writing is limited to
"Ich bin Du
bist.." :-))"

But it seems as the Germans finally :-) learned English,doesn't

it?

Lars Hedstroem/Sweden

PS:In this mail I have pressed enter after every line,does it

help?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 31 Oct 1999 22:59:10 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: (FLUFF - shared birthdays)
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

My folks got several free things (an amount of diapers, formula
etc.), but they defered to the second baby in the area - they were
not as well off, and since I was the third child my parents had they
didn't really need alot ot things...

Ken
khansen@njcc.com

-----Original Message-----
From: Steve Dowell <sdowell@HARRAHS.COM>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Friday, October 29, 1999 10:57 AM
Subject: Re: (FLUFF - shared birthdays)


>        My younest son's birthday was on Jan. 1st, 1988. He was the
>first one born in our town on the new year, and my wife and him were on
>the front page of the newspaper.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 31 Oct 1999 23:25:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: Fluff: Birthdays (was: How many 200LX's should we buy...)
Comments: To: GJColeman@CSI.COM
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Why wouldn't the odds be 100% once you have 366 (or 367)
people on the list? Each one has a birthday (right?!), and if we
are an "ideally and evenly distributed" random collection of
people, we would each have our own unique birthday (day and
month), until we run out of unique days, right around 365 or
366 days, absed on our current calendar...

Ken (Too smart to pay real attention in math class, and I have
the calculus grade to prove it!)
khansen@njcc.com

-----Original Message-----
From: George Coleman <GJColeman@CSI.COM>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Friday, October 29, 1999 1:32 PM
Subject: Fluff: Birthdays (was: How many 200LX's should we buy...)


> > > The Feb 15 deadline is a good idea... my birthday is the day after
<g>.
> >   Really?  Cool.  Me too!  :)
> And me. Odds anyone?

Figure the odds that one other person will NOT have your birthday
at 364/365, or perhaps more accurately, 364/365.25 (leap years).

Then the odds that your two best friends will not have it is that
number squared, ..., and the odds that 500 other people will not
have it is about 18%.  In other words, if there are 500 people
on this list then the odds are 82% that at least one of them
will have your birthday.

If there are 203 people on the list, then the odds are about 50%.
If 900, then 95.4%.

-Geo.
(former math major, retired)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 31 Oct 1999 23:39:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: (FLUFF) RE: Numbers
Comments: To: Steve Dowell <sdowell@HARRAHS.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

And I note for the record that after your brush with potentially
great fortunes, you *still* work at Harrahs - I guess it didn't
take too many quarters to see for yourself who has the upper-
hand in that relationship... ;)

Ken
khansen@njcc.com

PS - The worst thing that can happen to a young man in a casino
is to win big on their first visit - it may take several "devastatingly"
losing visits to appreciate the advantage of *owning* the casino...

PPS - Don't ask how I know it, please just accept it. ;)

-----Original Message-----
From: Steve Dowell <sdowell@HARRAHS.COM>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Friday, October 29, 1999 5:31 PM
Subject: (FLUFF) RE: Numbers


>Aw... Go ahead and hit the Casinos Al. That's what pays my paycheck! :-)
>(I work for Harrah's. We also own the Rio in Vegas.)
>But do you know what? Neither I, nor anyone else in my department does
>(hardly) any gambling. It was nearly a year after I started work here
>before I played a slot machine.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 31 Oct 1999 23:46:11 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: (FLUFF - shared birthdays)
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

We anticipate numerous prizes for first 1/1/2000 birth, in fact,
some locations had contests 40 weeks prior to 1/1/2000, and
if one of those folks that stayed at the hotel 40 weeks prior to
(one year before) the new millenium then they will get prizes.

Contestents were left to their own methods of "booting" the
birth process...

Humourous and harmless...

Ken
khansen@njcc.com

-----Original Message-----
From: Martin Bergvill <martin@MOBILPOST.COM>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Friday, October 29, 1999 7:21 PM
Subject: Re: (FLUFF - shared birthdays)


>On 29 Oct 1999 09:05:41 -0700, Steve Dowell <sdowell@HARRAHS.COM> wrote:
>
>> <snip>
>>         As a reference point, my birthday is Jan. 1st, and in my *life*
>> I have
>>         only met a handfull of folks with my birthday (Jan. 1st, 19XX).
>>         <snip>
>>
>>         My younest son's birthday was on Jan. 1st, 1988. He was the
>> first one born in our town on the new year, and my wife and him were on
>> the front page of the newspaper.
>>
>>         Steve
>
>Way off any topic here but have you had any "contest" in your country to
>"provide" 2000 new years baby?
>
>Here in Norway we had a lot of "competition" from Hotels and others to
>provide free rooms/free stuff for couples to make a new year baby..
>
>--
>Martin Bergvill Narvik, Norway
>-Palmtop friendly sig...
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 07:10:28 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, GWilson241@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Gordon H. Wilson" <GWilson241@AOL.COM>
Subject:      Re: Solver Formulas: Do you have some good ones?
Comments: To: Longden_Loo@candle.com
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

I am also interested in collecting good solver formulas- especially those for
MBA applications. If you have any good ones, please send them to me. Thanks.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 07:27:41 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: Memo - long lines (Was Re: FLUFF:Cod+Hitler)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> The problem is that Memo only does word-wrap in its own screen.  The
> files it creates only have line breaks if you hit Enter.  If you look
> at a memo doc with anything else, you'll see VERY long lines.

You can force Memo to put a carriage return at the end of each line on =
the
screen (as defined by your margin settings) by having it print to a file.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 07:27:43 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: Windows 98 & FAT32 File System
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> It was suggested to change from FAT16 to FAT32 file system to improve
> Windows performance and space utilization.

I use FAT32 Under Win98 and CPACK runs the same as it did under FAT16 and
Win95.  I use it in MSDOS mode either way.  I have not had any programs =
crash
from FAT32.  My understanding is that only programs that bypass the DOS =
disk
routines and try to read the drive directly (like disk utilities and
defragmenters) will notice the difference.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 08:35:15 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, BOCHE@DE.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE>
Subject:      Re: FLUFF:Cod
Comments: To: BOCHE@DE.IBM.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Ulrich hat gescrieben:


"Lars,
ja, ich komme aus Deutschland (aus der Gegend von Stuttgart)."

So Sie kommen aus Stuttgart,sehen Sie die Alpen von da?

"Ich angele selbst nicht. Ihr habt viel bessere und einfachere
Bedingungen daf=FCr in Schweden als wir hier, denke ich."

Ja,das glaube ich auch.Aber sie in suedwestdeutschland haben ja Rhen?Sie=
 brauchen ja nicht zu essen die Fische :-))


Mit freundlichen Gr=FC=DFen

Lars Hedstroem/Schweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 14:43:46 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              schittke@RZ.FH-AUGSBURG.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Prof. Dr. H.J. Schittke" <schittke@RZ.FH-AUGSBURG.DE>
Subject:      Re: How to download Word 5.5?
Comments: To: David Sargeant <david@HPLX.NET>
In-Reply-To:  <Pine.LNX.4.10.9910311548000.9941-100000@hplx.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> -----Original Message-----
.....  And
> according to my computer science teacher, they also give MS
> Assembler 4.0 away free, although I haven't seen any official
> Microsoft URLs confirming that.
>
Indeed?
Why don't you ask him where we can get hold of MASM 4.0?
Eagerly waiting for your answer      - hjs

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com>

iQA/AwUBOB2K8s/lHvGeiCpfEQI+5gCfe7bzW1nUB31onaHl/Fkr4YDZ3C0AoN69
Nll8JwTRnrZVJBjAIbcaagE6
=rEnl
-----END PGP SIGNATURE-----

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 31 Oct 1999 22:11:21 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Fluff: Birthdays

George
Yesh, give the 24 betters a chance,
at 30 you would hav good odds making it a sucker bet.
(of two people having the same birthday.)

Semper mobilis,
yor pal al :-) .............

>Dear Pal Al,
>> Geo:
>> >If there are 203 people on the list, then the odds are about 50%.
>> >If 900, then 95.4%.
>> Were yu really a math major and yu don't think 24 is correct?
>Yes and no. I composed that solution before all the stories about
>people in a classroom came out. I thought the question was,
>"What are the odds of someone else having an April 16 birthday?"
>Curtis Cameron and Kiyoshi Akima have each explained the
>discrepancy eloquently so I won't belabor it.  24 is the correct
>answer to the other question, but I wouldn't place a bet unless
>there were at least 30 people in the room and they all gave me
>even odds!
>
>I graduated from Indiana U. with a degree in Mathemeatics.
>Did anyone else graduate from I.U.?
>and what are the odds of that?!?   Just Kidding! :)
>
>-Geo.
>
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 08:23:25 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Fluff: Birthdays

WHAT
You went to CCNY and still alive to talk about it?
Are you old, crippled or worse?
I went to Gugginheim concerts at Louisorn stadium :).

Semper mobilis,
yor pal al :-) .............

>> I graduated from Indiana U. with a degree in Mathemeatics.
>
>CCNY - Biology.  But I dated a math major and then a chemistry major.
>Next time it will be someone in home ec! (G)
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 08:40:27 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Numbers

Ken
Read too much trivia about gambling as a kid to let winning in a
casino affect me.  Let the winnings kome, I'll take it and run.
I usually eat up the buffets and leave $20 bucks in .25 slots for
the whole COMDEX week.  After this post, maybe I'll be banned :).

>PS - The worst thing that can happen to a young man in a casino
is to win big on their first visit - it may take several "devastatingly"
losing visits to appreciate the advantage of *owning* the casino...

Semper mobilis,
yor pal al :-) .............


___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 08:58:19 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Barry Marks <barry@FBTC.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Barry Marks <barry@FBTC.NET>
Subject:      Re: HPLX-L Digest - 30 Oct 1999 to 31 Oct 1999 - Special issue
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>Surprising as it is, they are actually giving MS Word 5.5 away free.  And
>according to my computer science teacher, they also give MS Assembler 4.0
>away free, although I haven't seen any official Microsoft URLs confirming
>that.

Microsoft is also giving away Masm 6.14, the 32 bit only version.  It's
included with their freely downloadable DDK and a couple of other packages.

There's a free package for 32 bit windows asm development that includes this
as well as a number of libraries and windows.h called Masm32.  I'm assuming
that Microsoft has allowed this to be offered free on the web since there
are links to it on a number of reputable sites.  The url is
http://www.pbq.com.au/home/hutch/masm.htm

There are a couple of other free windows programming packages that include
Masm 6.14.  I've seen them on the web but I don't have the urls handy.  I
think there are links to them in the asm faq.

I don't think any of us doubt that Microsoft is concerned with making money,
but maybe they're not as evil as people like to think.  Even if this is just
done for pr, it's being done.

Actually, now that I think of it, when have they ever charged for DirectX?
It and the SDK have always been free.  They could have sold it easily.  I'm
sure there are other examples.  (I won't mention IE in this context :)

Barry

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 10:07:25 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Albert Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: HPLX-L Digest - 30 Oct 1999 to 31 Oct 1999 - Special issue
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon,  1 Nov 1999 10:00:28 -0500 (EST)

07h30m16s ago ...
On Mon, 1 Nov 1999, Lionel Zuckier wrote:

> I have been trying to search on the archives for information about
> importing 200LX phonebook data into the netscape addressbook...
>
> 1. Mitch's search engine (HTTP://www.palmtop.net/hp-archive/ghindex.html=
)
> is missing a "glimpse" file and is inoperative.

Yes, those files are no longer available.

> 2. Al's database (HTTP://www.sp.uconn.edu/~mchem1/hypermail/ghindex.html=
)
> is not allowing a search of the complete database, but only 2 months.

Hmm...should be able to search 12months "online"...of course all the
logs are avaialble as ZIP archives, but thats alot od downloading ;-)


> 3. BY THE WAY, DOES ANYONE KNOW WHAT VERSION OF NETSCAPE ALLOWED
> IMPORTATION OF 200 LX PHONEBOOK DATA?

I have ther latest version of COMMUNICATOR 4.7, it accepts either TAB
or COMMA delimited files...I assume earlier do as well


*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 10:07:28 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Albert Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      OCT HPLX-L Logs available
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon,  1 Nov 1999 10:05:09 -0500 (EST)

Subject say it all...let me know if there are any problems...

Cheers,

*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 09:15:09 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: Project Management software - information requested please!
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<Did Thaddeus buy all the remaining stock from Experience in Software?
Thanks for making
it available at an attractive price.  I would recommend them as useful
thinking aids.>>

Most of it.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 09:23:18 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: CPack vs Transfile (was: CPack Question and others)
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

<<
   >QUESTION: Who is in the position to ask HP to donate CP to
   >the public domain now?

Maybe Thaddeus? ... or someone with contacts at HP.  With the 200LX leaving
the scene come November, maybe HP won't consider CP as a profit/liability
issue anymore.>>

Actually, I asked some months ago.  I think it may happen eventually.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 10:58:32 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Novosad <Novosad@SERVER030.FWB.SAIC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Novosad <Novosad@SERVER030.FWB.SAIC.COM>
Subject:      Re: How to download Word 5.5?
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

> David Sargeant <david@HPLX.NET>
> Surprising as it is, they are actually giving MS Word 5.5 away free.  And
> according to my computer science teacher, they also give MS Assembler 4.0
> away free, although I haven't seen any official Microsoft URLs confirming
> that.

David,

    It is actually MASM version 6.1x.  You have to go to
their developer site and download it.  Search DejaNews in
the comp.lang.asm.x86 news group.  It is a part of the SDK
as well.  Never mind I found the FAQ.

> Subject 9. MASM Free From Microsoft                                 REVISED
>
> MASM Version 6.11d is available on the Windows 98 Software Development Kit.
> It is part of an 18+ Meg file.  The URL to the file is:
>
>     http://www.microsoft.com/hwdev/ddk/download/win98ddk.exe


    IBM will give you MASM 5.1 or ALP.  This was where I
was pointed to get a copy.

> http://service.software.ibm.com/os2ddpak/

> Steve

> 2nd thoughts:
> http://service.software.ibm.com/dl/ddk/priv/ddk-d

> Though this is the password protected page I've bookmarked.
> Try maybe .../dl/ddk

     And there is NASM as well, a freeware assembler.
> 24.8  NASM
>
> The birth of this assembler started out of a thread that started on
> comp.lang.asm.x86.  When you download this assembler, you get the source
> code in ANSI C.  The web page devoted to this assembler is:
>
>     http://www.cryogen.com/Nasm/
>     http://www.web-sites.co.uk/nasm/

Steve (Who actually uses MASM 3.0 mostly.)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 11:16:22 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Vegas chow
Comments: To: al chin <hobchi@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Is it better than the MGM Grand, or the new Belagio?

I stayed at the Belagio 1 night earlier this year so we could get really
good seats to see Circis De Solei(sp?) "O".  (Great show BTW!)

I felt the Belagio was grossly over priced (unless you feel the cost is
justified by the fanciest bathroom I've ever seen).

Dinner was also expensive for only average food.

My impression was the Belagio is targetted toward the "high roller" and
only tolerates us common folk.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 09:20:57 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bill Childers <childers@GARLIC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bill Childers <childers@GARLIC.COM>
Subject:      Re: Vegas chow
Comments: To: Russel Brooks <rlbrooks@POBOX.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I stayed at the Bellagio for a weekend a few months ago.  I'm hooked.
Expensive - but there's no place like it.
I can't wait to go back.

Bill

-----Original Message-----
From: Russel Brooks <rlbrooks@POBOX.COM>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Monday, November 01, 1999 8:16 AM
Subject: Re: Vegas chow


>I felt the Belagio was grossly over priced (unless you feel the cost is
>justified by the fanciest bathroom I've ever seen).
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 30 Oct 1999 19:19:20 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Donald Collins <dcollins@MCSWEB1.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Donald Collins <dcollins@MCSWEB1.COM>
Subject:      LE.EXM & ME.EXM
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Where can I find these files?  I didn't see them on S.U.P.E.R.

Don.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 12:57:03 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: A Palmtop-Mobile Experiment
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Stefan,

> -Start the communication program under System Manager.
> -Set it up for infrared mode (baud rate doesn't matter).
> -Put your mobile (or cordless) phone besides the palmtop.
>  Nothing should happen.
> -Now make a phone call with your mobile (cordless) and=20
> put the
>  phone close to the palmtop: the infrared port receives=20
> data!
>=20
> This only happens, if the serial port is set up for I
> R.
> In order to exclude the receiving photo diode as a sour
> ce for
> this fault behavior, I removed it from my palmtop, and=20
> the
> IR port *STILL* gets data if a mobile phone is online.
>=20
> Questions:
> ----------
>=20
> -Why does this happen?

Most likely electromagnetic waves creating Voltage induction (bad english=
) in
palmi's circuits. I mean the wiring side, not the optical section. Thats
probably why taking out the IR lense has no effect.
=20
> -Does it also happen with Omnibooks/notebooks?
>  It does not on my old HP95LX!

Don't know.
=20
> -What can be done on the palmtop side to solve this p
> roblem?

Electromagnetic shielding (Farraday'scher K=E4fig). Try cross-wrapping wi=
res
around palmi and connect them to ground on a socket outlet in your room.=20

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 12:57:05 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: HPLX-L Digest - 30 Oct 1999 to 31 Oct 1999 - Special issue
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Lionel,

> 3. BY THE WAY, DOES ANYONE KNOW WHAT VERSION OF NETSCAPE ALLOWED
> IMPORTATION OF 200 LX PHONEBOOK DATA?

If Avi Meshar is not reading try getting in touch with him off-list at
   sponsor@FTEL.NET

He was rather enthusiastic when he found out that Netscape did sync with
HP200LX (g).

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 10:08:56 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Vegas recommendations
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

This is mildly off-topic, but certainly no more so than Hitler.

My family (wife, 2 "kids" 16 and 21) and I are planning on a Las Vegas trip,
unfortunately the week after Comdex.

Several other members have mentioned planning to be there for Comdex, and I'll
express my regrets at not being able to hitch up with them at what would've been
my first Comdex (sorry, the schedule's out of my control).

Of interest to me, and I'm sure to other Vegas trippers, are personal
recommendations such as have already been made (Rio - good buffet,  Bellagio -
good decor, but expensive).

I'd like to solicit further recommendations for food and entertainment (ones
that you or a friend personally recommends) either off-list or on-list (for the
benefit of the Comdex visitors).  Cost is a concern, so if it's expensive,
letting me know what I'm getting in return would be nice.  A knock-em dead show
that has to be seen once in a lifetime, would still be considered even if it's
expensive... you all know the  drill (ie, getting the most bang for the buck)
<g>.

I'll be staying at the Excaliber 11/24-25, and besides that, I haven't been to
Vegas in 20 years, so any more recent experiences would be greatly appreciated.

Thanks.

- Longden

PS I'll compile and post the recommendations before Comdex if anyone wants.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 13:17:13 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: LE.EXM & ME.EXM
Comments: To: Donald Collins <dcollins@MCSWEB1.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon,  1 Nov 1999 13:10:29 -0500 (EST)

01h59m54s ago ...
On Mon,  1 Nov 1999, Donald Collins wrote:

> Where can I find these files?  I didn't see them on S.U.P.E.R.

You can find 'em on the Vector site (along with a lot of cool Japanese
software for the LX.
        http://www.vector.co.jp/pack/dos/util/machine/hp/
They both need Japanese fonts to work, though.


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 13:18:30 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Carole Kilpatrick <ckilpatr@US.ORACLE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Carole Kilpatrick <ckilpatr@US.ORACLE.COM>
Organization: Oracle Corporation
Subject:      Re: Vegas recommendations
Comments: To: Longden_Loo@CANDLE.COM
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="------------81652037EC5C914FBC112889"

This is a multi-part message in MIME format.
--------------81652037EC5C914FBC112889
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Longden:

While I cannot necessarily suggest food choices, I do recommend that you view Cirque
de Soleil at Treasure Island (not "O" at the Bellagio).

Every time I visit Las Vegas, which is annually, I always see this show!  Words just
cannot describe the show...

Regards,

Carole

Longden Loo wrote:

> This is mildly off-topic, but certainly no more so than Hitler.
>
> My family (wife, 2 "kids" 16 and 21) and I are planning on a Las Vegas trip,
> unfortunately the week after Comdex.
>
> Several other members have mentioned planning to be there for Comdex, and I'll
> express my regrets at not being able to hitch up with them at what would've been
> my first Comdex (sorry, the schedule's out of my control).
>
> Of interest to me, and I'm sure to other Vegas trippers, are personal
> recommendations such as have already been made (Rio - good buffet,  Bellagio -
> good decor, but expensive).
>
> I'd like to solicit further recommendations for food and entertainment (ones
> that you or a friend personally recommends) either off-list or on-list (for the
> benefit of the Comdex visitors).  Cost is a concern, so if it's expensive,
> letting me know what I'm getting in return would be nice.  A knock-em dead show
> that has to be seen once in a lifetime, would still be considered even if it's
> expensive... you all know the  drill (ie, getting the most bang for the buck)
> <g>.
>
> I'll be staying at the Excaliber 11/24-25, and besides that, I haven't been to
> Vegas in 20 years, so any more recent experiences would be greatly appreciated.
>
> Thanks.
>
> - Longden
>
> PS I'll compile and post the recommendations before Comdex if anyone wants.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--------------81652037EC5C914FBC112889
Content-Type: text/x-vcard; charset=us-ascii;
 name="ckilpatr.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Carole Kilpatrick
Content-Disposition: attachment;
 filename="ckilpatr.vcf"

begin:vcard
n:Kilpatrick;Carole
tel;cell:248.760.4401
tel;fax:248.816.8270
tel;work:248.614.5117
x-mozilla-html:FALSE
version:2.1
email;internet:ckilpatr@us.oracle.com
title:Senior Customer Advocacy Manager
adr;quoted-printable:;;Oracle Corporation=0D=0A3290 West Big Beaver Road=0D=0ASuite 300;Troy;Michigan;48084;USA
x-mozilla-cpt:;-11840
fn:Carole Kilpatrick
end:vcard

--------------81652037EC5C914FBC112889--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 10:41:50 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: LE.EXM & ME.EXM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Sat, 30 Oct 1999 19:19, Donald Collins <dcollins@MCSWEB1.COM> wrote:

> Where can I find these files?  I didn't see them on S.U.P.E.R.


Hi Don & All,

They can be found at:
http://www.vector.co.jp/pack/dos/util/machine/hp/

There is also a dedicated web page, but I've forgotten the URL.





Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 12:26:40 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: Vegas recommendations
MIME-Version: 1.0
Content-Type: text/plain

Longden,
Al Chin has a Vegas database at the database repository at palmtop.net.
It has some pretty interesting tidbits in it.

Steve



        -----Original Message-----
        From:   Longden Loo SMTP:Longden_Loo@CANDLE.COM
        Sent:   Monday, November 01, 1999 10:09 AM
        To:     HPLX-L@UCONNVM.UConn.Edu
        Subject:        Vegas recommendations

        This is mildly off-topic, but certainly no more so than Hitler.

        My family (wife, 2 "kids" 16 and 21) and I are planning on a Las
Vegas trip,
        unfortunately the week after Comdex.

        Several other members have mentioned planning to be there for
Comdex, and I'll
        express my regrets at not being able to hitch up with them at
what would've been
        my first Comdex (sorry, the schedule's out of my control).

        Of interest to me, and I'm sure to other Vegas trippers, are
personal
        recommendations such as have already been made (Rio - good
buffet,  Bellagio -
        good decor, but expensive).

        I'd like to solicit further recommendations for food and
entertainment (ones
        that you or a friend personally recommends) either off-list or
on-list (for the
        benefit of the Comdex visitors).  Cost is a concern, so if it's
expensive,
        letting me know what I'm getting in return would be nice.  A
knock-em dead show
        that has to be seen once in a lifetime, would still be
considered even if it's
        expensive... you all know the  drill (ie, getting the most bang
for the buck)
        <g>.

        I'll be staying at the Excaliber 11/24-25, and besides that, I
haven't been to
        Vegas in 20 years, so any more recent experiences would be
greatly appreciated.

        Thanks.

        - Longden

        PS I'll compile and post the recommendations before Comdex if
anyone wants.

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 13:50:57 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Padin <epadin@WAGWEB.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Padin <epadin@WAGWEB.COM>
Subject:      Re: PCMCIA Disks Available!
Comments: To: smoore <smoore@EFFECTNET.COM>

http://www.ebay.com


>-----Original Message-----
>From: smoore mailto:smoore@EFFECTNET.COM
>Sent: Sunday, October 31, 1999 11:21 AM
>To: HPLX-L@UCONNVM.UConn.Edu
>Subject: HPLX-L PCMCIA Disks Available!
>
>
>I  have (9) 20 Meg PCMCIA Flash Disks ATA Type II available.
>They are in
>excellent condition. They have only been used a  very few times on
>testing a couple new prototype products at work. I sell (1) 20 Meg
>PCMCIA disk for $35.00 plus $5.00 shipping and I sell (2) disks for
>$65.00 plus $5.00 shipping. I accept Money Orders Only! and
>you can send
>payment to my address at:
>
>Scott Moore
>20455 S.W. Kirkwood Street
>Beaverton, Or 97006
>
>I will email you back  the day I receive your payment and let you know
>that your disks our on the way. I always send out next day unless I
>receive your payment on a Saturday and then I will send them out on
>Monday. Please email me and let me if you are interested and when you
>are sending payment so I can hold your disks for you. The response has
>been tremendous and the people I have worked with on this group have
>been great.  Thanks alot!   Scott
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 11:05:01 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      Re: Vegas chow
Comments: To: Russel Brooks <rlbrooks@POBOX.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 8bit

It's called "Cirque du Soleil". They are from Quibec/Canada, my home town!! If
anyone gets a chance to see any of their shows, you won't regret it!

Philippe

----- Original Message -----
From: Russel Brooks <rlbrooks@POBOX.COM>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Monday, November 01, 1999 8:16 AM
Subject: Re: Vegas chow


> > Is it better than the MGM Grand, or the new Belagio?
>
> I stayed at the Belagio 1 night earlier this year so we could get really
> good seats to see Circis De Solei(sp?) "O".  (Great show BTW!)
>
> I felt the Belagio was grossly over priced (unless you feel the cost is
> justified by the fanciest bathroom I've ever seen).
>
> Dinner was also expensive for only average food.
>
> My impression was the Belagio is targetted toward the "high roller" and
> only tolerates us common folk.
>
> cheers... Russ
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 11:11:18 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Vegas recommendations
Comments: To: Steve Dowell <sdowell@HARRAHS.COM>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Very interesting,  thanks Steve (and Al, of course).

A nice compendium of all things Vegas.... but personal recommendations are still
welcomed!

- Longden





Steve Dowell <sdowell@HARRAHS.COM> on 11/01/99 10:26:40 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Steve Dowell <sdowell@HARRAHS.COM>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: Vegas recommendations




Longden,
Al Chin has a Vegas database at the database repository at palmtop.net.
It has some pretty interesting tidbits in it.

Steve

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 14:32:38 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Bad URL?

Hi All,

A while back, someone offered the following URL to check out (a Jornada
200LX?!)

I still get errors when attempting to go there by cutting and pasting the
URL into my browser.  Anyone else have a better URL for this?

http://www.shopping.hp.com/cgi-bin/shopping/hpdirect/shopping/scripts/gen
eral/product_detail.jsp?BV_SessionID=336930937.940879807&BV_EngineID=dgal
gckhidhkbemgcfjfcffdog.0&product_oid=8486&product_cat_oid=-14878&sort_ord
er=PRICE&bottom_navbar_type=1

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 13:05:59 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Vegas recommendations

Walking around Ceaser's Palace is nifty.  You'd think yu wuz in Italy.
Their buffet is outstanding (Fr) for free lobster, with meal.  See my
VEGAS.PDB

Semper mobilis,
yor pal al :-) .............

>This is mildly off-topic, but certainly no more so than Hitler.
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 11:56:32 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      The dreaded Hinge Crack, my Halloween surprise!
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Okay, must remain calm: I've got the dreaded hinge crack, about 1/2" long on my
palmtop. I've checked http://www.hplx.net/hardware.hinge.html already. Is there
another place to check before I attempt to fix it?

Thanks in advance!!!

Philippe

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 13:58:06 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      ApptBook: convert ToDo -> Appt?
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Hello illustrious LXers,

I am coming to you to see if I might have missed an easy way
for converting a ToDo item to an appointment in the native HP
ApptBook application.

Of course, I could write a macro to do this, but there may be
an easier way I've overlooked.  Any method would also need to
transfer associated notes.

By the way, I suspect that Andreas's PIM/PE would handle this
well, but I'm not interested in that approach.

Thanks for any suggestions!

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 14:10:46 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: ApptBook: convert ToDo -> Appt?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

I think probably macro is the way to go.  I've got one set up for fn+f9.
Here's what mine looks like:
{Enter}{F5}t{Enter}{Appt}{F2}{Paste}{F10}

(The "t" positions to a defined smartclip that I have set up)

Steve



        -----Original Message-----
        From:   Ted Heise SMTP:theise@NETINS.NET
        Sent:   Monday, November 01, 1999 11:58 AM
        To:     HPLX-L@UCONNVM.UConn.Edu
        Subject:        ApptBook: convert ToDo -> Appt?

        Hello illustrious LXers,

        I am coming to you to see if I might have missed an easy way
        for converting a ToDo item to an appointment in the native HP
        ApptBook application.

        Of course, I could write a macro to do this, but there may be
        an easier way I've overlooked.  Any method would also need to
        transfer associated notes.

        By the way, I suspect that Andreas's PIM/PE would handle this
        well, but I'm not interested in that approach.

        Thanks for any suggestions!

        Ted

        --
        Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 16:14:42 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: Vegas chow
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

> It's called "Cirque du Soleil". They are from Quibec/Canada, my home town!! If
> anyone gets a chance to see any of their shows, you won't regret it!
>
Absolutely! Cirque de Soleil is the best live show I have ever seen, and I
regret I only saw it once before moving to Toronto. If the Vegas version is even
just a fraction of the original, it gets my highest recommendation.

Bruce, formerly in Montreal

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 22:27:48 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Mobile phone emulation for the Palmtop
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Andreas Garzotto and myself are still feverish searching for a
solution of the problem, why the palmtop is a receiver for
stray RF signals, which hamper good IR connections with mobile
phones like the S25.

In the meantime, Andreas had the brilliant idea, to use this
palmtop behavior for something useful like a ring indicator.
He immediately came up with a prototype and I took the
challenge and rewrote his program in assembler. Here it is:

http://peichl.hplx.net/ring.zip

You can have *A LOT* of fun with this programm, but you may
also come into serious trouble, if you exaggerate. Test the
technical knowledge of your friends. I have to admit, that
one week ago, I would not have passed this test.

I already had the chance, to test some 'victims'. All I can say
is: After the demonstration of the program you can tell them
everything, they believe it if you are a good actor. I for one
told somebody, that I recorded all relevant data of his mobile
phone and am now able to make calls on his account ;-)

After he was shocked, I told the truth: That I'm only able to
record his calls, if his mobile is close to my palmtop. He was
relieved, but after I told the whole truth (that the palmtop
just rings), I was close to be beaten up.

So please be careful! Did you hear, David Sargeant?

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 16:34:40 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: A Palmtop-Mobile Experiment
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

> -Now make a phone call with your mobile (cordless) and=20
> put the
>  phone close to the palmtop: the infrared port receives=20
> data!
snip
> -Why does this happen?
>
I assume the phone's RF transmitter is causing EM induction in the palmtop.
Perhaps the palmtop's IR circuit is less well shielded than it should be.

snip
> -What can be done on the palmtop side to solve this problem?

<grin> Well, you write an application to save the inducted data to a buffer,
where it can be decoded and played back through the palmtop's speaker. Then tell
the FBI, CIA and NSA that you figured out how to turn a 200LX into a
Tempest-style snooping device. Then the spooks will order thousands of 200LXs
from HP, convincing them to put the palmtop back into production!

Well, if this were a movie, it would work.

Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 21:47:29 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: FLUFF: PalmV <-> 200LX (was: Re: FLUFF:Cos)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Oh, a PalmV user... ;-)

Sorry!

> unsubscribe
>
> > -----Original Message-----
> > From: Nan-shan Chen SMTP:chen@GET.UNI-PADERBORN.DE
> > Sent: 29 October 1999 19:58
> > To:   HPLX-L@UCONNVM.UCONN.EDU
> > Subject:      Re: FLUFF: PalmV <-> 200LX (was: Re: FLUFF:Cos)
> >
> > :) :)
> >
> > And I've never seen, with my own eyes, a single homo sapiens
> > holding in the hand a HPLX palmtop except the guy who sold
> > me my HP200LX because he just had to pass it to me with his
> > hand. :( :(
> >
> > And the people look at me as if I were out of my mind. They
> > just wouldn't ask me what I'm doing with THAT "thing", so that
> > I don't even have a chance to defense myself that I'm not.
> >
> > The people are allowed to read daily news everywhere on the
> > paper. Why shouldn't I read mine EVERYWHERE on semiconductor?
> >
> > Rudi
> >
> > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
> This message is for the named person's use only.  It may contain confidential, proprietary or legally privileged information.  No confidentiality or privilege is waived or lost by any mistransmission.  If you receive this message in error, please imme
d
> iately delete it and all copies of it from your system, destroy any hard copies of it and notify the sender.  You must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are not the intended recipien
t
>  CREDIT SUISSE GROUP, CREDIT SUISSE FIRST BOSTON, and each of their subsidiaries each reserve  the right to monitor all e-mail communications through its networks.  Any views expressed in this message are those of the individual sender, except where t
> he message states otherwise and the sender is authorised to state them to be the views of any such entity.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml


--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 16:48:30 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Albert Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: The dreaded Hinge Crack, my Halloween surprise!
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon,  1 Nov 1999 16:43:22 -0500 (EST)

Fear-Not! As many will attest(my self included), "Krazy glue" will fix
you right up...separate the crack with a little stress, apply small
amount of glue w/ straight pin, hold closed for ~ 5min...let it sit
overnight!

There, that wasn't so bad, was it?

;-)  AJKind

01h46m50s ago ...
On Mon, 1 Nov 1999, Fryday wrote:

> Okay, must remain calm: I've got the dreaded hinge crack, about 1/2" =
long on my
> palmtop. I've checked http://www.hplx.net/hardware.hinge.html already. =
Is there
> another place to check before I attempt to fix it?

*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 15:15:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Mobile phone emulation for the Palmtop
In-Reply-To:  <m11iOzP-000JnQC@fwd14.btx.dtag.de>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 1 Nov 1999, Stefan Peichl wrote:

> After he was shocked, I told the truth: That I'm only able to record
> his calls, if his mobile is close to my palmtop. He was relieved, but
> after I told the whole truth (that the palmtop just rings), I was
> close to be beaten up.
>
> So please be careful! Did you hear, David Sargeant?

Heh heh... don't worry, I'll be careful.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 14:25:17 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      Re: The dreaded Hinge Crack, my Halloween surprise!
Comments: To: MCHEM1@UCONNVM.UConn.Edu
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I'll try that tonight and report tomorrow! Thanks!

Philippe

----- Original Message -----
From: Albert Kind <MCHEM1@UCONNVM.UConn.Edu>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Monday, November 01, 1999 1:48 PM
Subject: Re: The dreaded Hinge Crack, my Halloween surprise!


Mon,  1 Nov 1999 16:43:22 -0500 (EST)

Fear-Not! As many will attest(my self included), "Krazy glue" will fix
you right up...separate the crack with a little stress, apply small
amount of glue w/ straight pin, hold closed for ~ 5min...let it sit
overnight!

There, that wasn't so bad, was it?

;-)  AJKind

01h46m50s ago ...
On Mon, 1 Nov 1999, Fryday wrote:

> Okay, must remain calm: I've got the dreaded hinge crack, about 1/2" long on
my
> palmtop. I've checked http://www.hplx.net/hardware.hinge.html already. Is
there
> another place to check before I attempt to fix it?

*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 09:43:59 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russell Hemery <rhemery@POWERUP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russell Hemery <rhemery@POWERUP.COM.AU>
Subject:      Spare Lids
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Hi all

Does anyone know if it is feasible to order spare lids (where the screen
goes) for the 200LX.

It seems Hal is able to order whole machines right now..  I was wondering if
HP would sell the top half only?  Price?

This would solve Hinge crack as well as Screen breakage.  I would prefer to
order a couple of spare screen halves rather than whole machine as I believe
that is what I may need in future to keep my LX running..

Any comments?

Russell

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 16:53:21 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      Re: ApptBook: convert ToDo -> Appt?
In-Reply-To:  <2B24B1089184D111B2A90000F6AA27B30297186A@memex1.harrahs.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 1 Nov 1999, Steve Dowell wrote:

> I think probably macro is the way to go.  I've got one set up for fn+f9.
> Here's what mine looks like:
> {Enter}{F5}t{Enter}{Appt}{F2}{Paste}{F10}
>
> (The "t" positions to a defined smartclip that I have set up)

Unless I'm missing something, this does not also transfer an
associated Note.  Here's what I came up with for that:

{Enter}{Copy}{F3}{F2}c:\_dat\tmp-note.txt{Enter}{F10}{F10}{F9}
{F2}{Paste}{F3}{F3}c:\_dat\tmp-note.txt{Enter}{Enter}{F10}{Tab}

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 6 Sep 1999 18:28:16 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              scott wormser <scotty2u@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         scott wormser <scotty2u@JUNO.COM>
Subject:      vegas

If you get a chance try National airlines to vegas nice big 757 good seat
pitch (175 seat's)and good food. good fares and website is
www.nationalairlines.com
i think.

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 21:56:44 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Don E. Weatherly" <weather@EXIS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Don E. Weatherly" <weather@EXIS.NET>
Subject:      Praise for Thaddeus
Comments: cc: "jonathan_miller@thaddeus.com Hal Goldstein"
          <hal_goldstein@thaddeus.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Folks, Thaddeus has got to have absolutely the best customer support in the
business.

I've always received prompt, courteous, friendly, and professional support
from Thaddeus, but after today I'm really impressed.

First, last night I sent an email to Hal asking about the current version
of Software Carousel.  In less than one business hour this morning I
received a program update.

Second, last night I discovered my batteries were dead on my HP200LX 32MB
DS palmtop.  Lost my c: drive drivers and could not access the f: drive.
Could not find my drivers disk or instructions (guess I've got to get
better organized).  This morning I emailed Thaddeus for help.  About one
hour later Jonathan sent me the drivers and instructions.

That is really excellent support!

Thanks Thaddeus (and Hal, Jonathan, and all the Thaddeus staff).  You're
great!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 17:28:53 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      Omnibook topic: Freewwweb with OB300
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I installed Freewwweb (Netscape 3.0 + dialer) on my Omnibook 300, but when I try
to dial, I get a little error dialog saying the dialer driver is not loaded. I
didn't see anything in my config.sys or autoexec.bat that should be loaded, but
I may not have noticed it. Does anyone know what I'm missing from my
configuration? I rebooted after the installation, as instructed, but that didn't
change anythying.

Thanks in advance!!

Philippe

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 18:38:55 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Subject:      MS Word with Newton keyboard
In-Reply-To:  <19991101192438.144A02025@rainbow.burnside.powells.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

A while back there was a brief thread on using a Newton keyboard with MS
Word.  I've just downloaded Word from the Microsoft website onto the flash
card in my LX.  Or rather, I just got it to work, finally-- I have a
Sparcom Drive100 (external 3.5" floppy drive made for the LX) that doesn't
like to transfer large files, so I had a heck of a time getting one of the
Word files (~330k) onto the LX.  I finally resorted to Transfile, which
took damn near forever-- though it's free, so I can't complain.

Anyway, I read in the archives that Word won't recognize the Newton
keyboard driver right out of the box.  However, I never saw a solution to
this problem in the archives.  I'm hoping that someone out there knows
which file needs to be changed or which switch needs to be toggled.

By the way, the Newton keyboard is great.  It has worked faultlessly for
me so far, and it has an excellent "feel".  Highly recommended if you do a
lot of typing on your LX.


Ain Vale
Portland, Oregon

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 22:39:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Victor Roberts <robertsv@IX.NETCOM.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Victor Roberts <robertsv@IX.NETCOM.COM>
Subject:      Re: Speed upgrade
Comments: To: "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 30 Oct 1999 08:27:07 -0700, "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET> wrote:

> Battery life - pure and simple.  And keeping it pure and simple:  No
> drivers - no blurry screen.

The screen on my new 200LX DS is not blurry even if I do not
load the 2X driver.

Vic

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 00:36:52 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      FW: CE losing Palm arm wrestle

A friend of mine sent me this article and I thought it would be of Interest
>-----------------------------------------------
>Excite News Article
>(http://news.excite.com/news/zd/991029/16/ce-losing-palm)
>-----------------------------------------------
>
>
>News Article: CE losing Palm arm wrestle
>
>By Carmen Nobel,PC Week
>Microsoft Corp. can't seem to get a grip on handheld computing.
>As the Palm OS continues to grow in popularity, some handheld hardware makers
>are abandoning rival Microsoft's Windows CE. To compound matters, the Redmond,
>Wash., company is falling short in its efforts to simplify an operating system
>that developers say is too complex for palm-size devices.
>The next version of CE for palm-size devices, which comprises CE 3.0 and
>an additional software layer, is in early testing and is likely to miss
>Microsoft's initial target to ship by year's end. The main attraction of the
>new palm-size operating system version, code-named Rapier, is supposed to be
>a simplified GUI that takes a lesson from 3Com Corp.'s Palm OS. But, according
>to some developers testing Version 3.0, changes to the GUI are superficial at
>best. For example, certain icons and functions are more accessible in menus
>than they are in Wyvern, the current GUI. A new icon for the "@" symbol makes
>it easier to create e-mail messages, and new pen and keyboard icons ease
>toggling back and forth between handwriting and tap-typing, testers said.
>But other features, such as the Tools menu and the Start menu, have simply been
>moved, not improved.
>"They've still screwed it up," said a software developer who designs
>products that run on both the Palm OS and CE. "I don't think Microsoft realizes
>that they have to get rid of the Start menu. Moving the Start menu doesn't
>reduce the number of taps."
>
>Cold feet
>
>Some hardware makers agree. "I don't think CE translates well into the palm
>form factor," said Michael DeNeffe, director of mobile PCs at NEC Computer
>Systems Division. "It seems asinine that you have to go to a Start menu on a
>palm-size device." NEC builds tablet-size CE devices for vertical markets!
>but the Mountain View, Calif., company scrapped plans for developing a
>palm-size CE device after building a prototype two years ago. Motorola Inc.
>entertained developing software for CE two years ago but decided against it
>due to a lack of interest in the operating system by top management. Last
>month, consumer electronics giant Philips Mobile Computing Group, of Campbell,
>Calif., announced it was dropping its Nino line of CE devices, saying it wasn't
>satisfied with the market and wanted to focus on smart phones. Microsoft may
>be harming its CE efforts by trying to stretch the platform too far, developers
>said. The company markets CE as a platform for mininotebooks, pen tablets for
>vertical markets, embedded systems and palm-size devices. They need to decide
>what they want to be when they grow up," said another CE developer, who
>requested anonymity. Microsoft officials declined to comment for this story.
>As Microsoft struggles with CE, the Palm OS from 3Com's Palm Computing division
>has become the hands-down favorite in the palm-size market. Palm OS is expected
>to grab 80 percent of the market for palm-size PCs this year, according to
>International Data Corp., in Framingham, Mass., while Microsoft's market share
>will remain stagnant at about 13 percent. To jump-start interest in CE,
>Microsoft is looking to Rapier along with a couple of initiatives announced
>this week. The company is creating a venture with NTT DoCoMo to deliver
>wireless services in Japan. Microsoft is also investing in Vadem Inc., a San
>Jose, Calif., startup that focuses on handheld computing. Under the terms of
>the latter agreement, Microsoft will retain the rights to Vadem's handwriting
>and ink compression technology. CE's major flaw, some users say, stems from
>Microsoft's decision to mimic the look and feel of the traditional Windows GUI
>on a much smaller form factor. "They started out with an operating system that
>was lame on the desktop, and they're sticking the same thing on a far more
>underpowered platform," said Steve Durst, an engineer at Skaion Corp., in
>Arlington, Mass., and an avowed fan of Linux and the Palm OS. "How can they
>expect that to succeed?"

Should we suggest that they use DOS as their next operating system?




======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 00:43:29 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: What would you do if this happened to you?

Nathalie Bugeaud writes:
> > I have carried my Hp200 on El Al quite a few times (as carry on in a "bum
> > belt") with no problems and no questions asked.
>
> did you put the bum-belt(+LX) through x-ray or the magnetic detector
> door-frame?
>
> the latter, i was told, can delete files :(

I always had my keys and pocket knife in the belt so it went through the
Xray machine. The only problem with having the palmtop in the pouch was that
when sitting on the plane my 2 year old son juped on my lap and cracked the
plastic left hinge cap. But it was easily replaced (I had a spare at home)
and my son survived unscathed as well! (He's lucky he is very cute!)


======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 20:30:33 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      Re: Fluff:Please read and do what you think is right
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>Please send this on to anyone you would like to remind of the
>importance of breast cancer awareness

what is this doing on the LX list?

you might as well mention prostate cancer or lung cancer
also silicon breasted women and too tight bras

hey,  you want to buy one of my red ribbons? - the money goes to a ram
upgrade and double speed ;)) ..... so i can organise a nationwide prostate
cancer day pink ribbon sales campaign
(we need you guys to keep us happy and satisfied :))))

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 21:55:33 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: Omnibook topic: Freewwweb with OB300
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Mon, 1 Nov 1999 17:28:53 -0800, Fryday <fryday@CALIFORNIA.COM> wrote:

> I installed Freewwweb (Netscape 3.0 + dialer) on my Omnibook 300, but =
when
> I try to dial, I get a little error dialog saying the dialer driver is =
not
> loaded. I didn't see anything in my config.sys or autoexec.bat that =
should
> be loaded, but I may not have noticed it. Does anyone know what I'm =
missing
> from my configuration? I rebooted after the installation, as instructed,=
 but
> that didn't change anythying.



Hi Philippe & All,

Been there seen that!
The Netscape dialer will only work in "Enhance Mode".

The only work around that I found was to use:

Trumpet Winsock 3.0  twsk30d.exe 
Go to http://www.trumpet.com and click on Software, Download, USA


HTH


Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 06:46:39 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Vegas chow
Comments: To: Fryday <fryday@CALIFORNIA.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

> It's called "Cirque du Soleil". They are from Quibec/Canada, my home town!! If
> anyone gets a chance to see any of their shows, you won't regret it!

You're right!  I saw Cirque du Soleil here in Berlin, Germany, about
one and a half year ago with their show 'Alegria'. Really great!

GTX
daniel


--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 23:51:17 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Kiyoshi Akima <kakima@IX.NETCOM.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Kiyoshi Akima <kakima@IX.NETCOM.COM>
Subject:      fluff: birthdays
MIME-Version: 1.0
Content-Type: text/plain; charset="shift_jis"
Content-Transfer-Encoding: 7bit

Ken Hansen wrote:
>Why wouldn't the odds be 100% once you have 366 (or 367)
>people on the list? Each one has a birthday (right?!), and if we
>are an "ideally and evenly distributed" random collection of
>people, we would each have our own unique birthday (day and
>month), until we run out of unique days, right around 365 or
>366 days, absed on our current calendar...

That's a completely different problem.How many of those other 365 (or 366)
people would have the same birthday as YOU? There are over five billion
people on the planet who don't have the same birthday as you. Get them all
on the list, and you have less than 100% chance of having somebody with your
birthday.

However, if there are 24 people on this list, the odds are better than 50-50
that two of them have the same birthday.Whether you are one of them is a
different matter. There would need to be about 250 people on the list for
you to have a 50-50 chance that one of the others will have your birthday.
And as mentioned above, there could be five billion people on the list
without anybody else sharing your birthday.

Kiyoshi Akima
kakima@ix.netcom.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 13:52:22 +0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rachmat Irfan <irfan@KSEI.CO.ID>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rachmat Irfan <irfan@KSEI.CO.ID>
Subject:      Re: ApptBook: convert ToDo -> Appt?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

Theodore Heise wrote :
        {Enter}{Copy}{F3}{F2}c:\_dat\tmp-note.txt{Enter}{F10}{F10}{F9}
        {F2}{Paste}{F3}{F3}c:\_dat\tmp-note.txt{Enter}{Enter}{F10}{Tab}

Isn't it should look like this :
        {Enter}{Copy}{F3}{F2}c:\_dat\tmp-note.txt{Enter}{F10}{F10}{F9}
        {F2}{Paste}{F3}{F3}c:\_dat\tmp-note.txt{Enter}{F10}{F10}

Compare to mine ...

Thank you

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 21:43:40 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, BOCHE@DE.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ulrich Boche <BOCHE@DE.IBM.COM>
Subject:      Re: HPLX-L Digest - 30 Oct 1999 to 31 Oct 1999 - Special issue
Comments: To: Lionel Zuckier <zuckier@AECOM.YU.EDU>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Netscape Communicator 4.61 still allows to import an address book from a text
file in
comma-delimited format. You'll have to do some work because you need to define
the
association between Netscape address book fields and CSV file fields when you
import the file.

To export the phone book in comma-delimited format you could either use the HP
200 LX
Connectivity Pack (XLATE/MERGE) or a smart clip on the palmtop.

Ulrich Boche

Lionel Zuckier <zuckier@AECOM.YU.EDU> wrote:

>>I have been trying to search on the archives for information about
>>importing 200LX phonebook data into the netscape addressbook.  I vaguely
>>recall from an ancient thread that some versions of netscape used to
>>support this.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 02:42:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE>
Subject:      Arachne
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Heloo,I wonder if there is anyone on the list who have tried
this program Arachne:



      Arachne   76,264 downloads
Free download 938K
    Description
      Arachne is a DOS browser that includes a freeware PPP
dialer and MPEG and WAV players. It also supports most of the
basic toolbar functions found in Netscape Navigator and
Microsoft Internet Explorer. Other features include support for
High Color modes, user-friendly PPP setup with modem
autodetection, and the ability to print HTML pages to
PostScript. One key new feature in this release is the ability
to download more than one image at once. It also fixes several
bugs.


       Quick Facts
      Company: xChaos software
      Version: 1.47 beta
      Release date: February 4, 1999
      File size: 938K
      Approx. download time: 4 min. at 28.8 kbps
      Downloads: 76,264
      License: Shareware
      Minimum requirements: 450K RAM (575K with PPP), SVGA


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 10:43:11 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Feher Tamas <etomcat@EGON.GYALOGLO.HU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Feher Tamas <etomcat@EGON.GYALOGLO.HU>
Subject:      Off-topic: Top metrication advocates in USA?

    Hello all,

I've been trying to learn more about how conversion to
the SI (metric) system in USA is going or idling.

One thing I couldn't find out is whether there are
advocates of conversion in the Congress or Senate. I
mean some representatives who are strongly comitted
and speak out for acceleration of switching units.

Seems like they are not mentioned anywhere on Web,
or maybe there aren't any for fear of loosing voters.
Can you enlighten me?

Thank you in advance, Sincerely: Tamas Feher.

____________________________________________________________
EGON - az ingyenes levelezorendszer  http://egon.gyaloglo.hu

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 11:29:45 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Raffaele Gaioni <gaioni@CS.UNIBO.IT>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Raffaele Gaioni <gaioni@CS.UNIBO.IT>
Subject:      HELP: Halloween Nightmare
Content-Type: text

While I was browsing with hv2.2 + wwwlx21 my little lx (8mb, ds, ac-dc
powered, megahertz 14.4k gold modem) got frozen.
Ctr+alt+del: nothing happened.
Ctrl+alt+on: nothing happened.
After some minutes I diconnected the HP from the acdc adapter and took
out the pcmcia card.
No way!
So I took out the 2 AA cellsand the unit "sleep" for some minutes. When
I finally put the cells in the HP, I got a strange behaviour: an
horizontal (black) line at about 1/3 of the scrren height (from the
bottom).
I'm desperated: I havn't done the backup yet this week.... :__(
Can You help me fellow palmtoppers?
If u have any hint send me an email ASAP (I read the digest version
of the list)!!!!

Tnx a lot
Raffaele

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 11:33:05 +0000
Reply-To:     fcampoy@gbt.tfo.upm.es
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
Comments:     Authenticated sender is <fcampoy@pop3.gbt.tfo.upm.es>
From:         "Francisco I. Campoy Blasco" <fcampoy@GBT.TFO.UPM.ES>
Subject:      Source code for testing batteries
In-Reply-To:  <3.0.1.32.19991027140119.008aae20@correo.cec.junta-andalucia.es>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Hi Hp's,

        I am seeking for the source code of  any program that checks the
batteries (Ni/Cd or Alkaline) of the HP. Can anybody help me ?

        Best regards,  Fran

____________________________________________

Francisco Ignacio Campoy Blasco
Grupo de Bioingenieria y Telemedicina
E.T.S.I. Telecomunicacion  -  UPM
Ciudad Universitaria  s/n
28040 Madrid, Spain

Tel  +34 91 5495700   Ext 332
Fax  +34 91 3366828
e-mail:  fcampoy@gbt.tfo.upm.es
web: http://www.gbt.tfo.upm.es
____________________________________________

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 17:49:03 +0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rachmat Irfan <irfan@KSEI.CO.ID>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rachmat Irfan <irfan@KSEI.CO.ID>
Subject:      Re: HELP: Halloween Nightmare
Comments: To: Raffaele Gaioni <gaioni@CS.UNIBO.IT>
MIME-Version: 1.0
Content-Type: text/plain

Replace all the battery, include back up battery.
Wait for several minutes.
Then try again to put all the battery into your LX.
Press on button

Hope this would help....

        -----Original Message-----
        From:   Raffaele Gaioni SMTP:gaioni@CS.UNIBO.IT
        Sent:   02 Nopember 1999 05:30
        To:     HPLX-L@UCONNVM.UConn.Edu
        Subject:        HELP: Halloween Nightmare

        While I was browsing with hv2.2 + wwwlx21 my little lx (8mb, ds,
ac-dc
        powered, megahertz 14.4k gold modem) got frozen.
        Ctr+alt+del: nothing happened.
        Ctrl+alt+on: nothing happened.
        After some minutes I diconnected the HP from the acdc adapter
and took
        out the pcmcia card.
        No way!
        So I took out the 2 AA cellsand the unit "sleep" for some
minutes. When
        I finally put the cells in the HP, I got a strange behaviour: an
        horizontal (black) line at about 1/3 of the scrren height (from
the
        bottom).
        I'm desperated: I havn't done the backup yet this week.... :__(
        Can You help me fellow palmtoppers?
        If u have any hint send me an email ASAP (I read the digest
version
        of the list)!!!!

        Tnx a lot
        Raffaele

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 06:32:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, bmoy@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Barbara L. Moy" <bmoy@COMPUSERVE.COM>
Subject:      Re: Fluff:Please read and do what you think is right
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I had no problem about the breast cancer awareness message being sent to =
this
list.  The subject indicated that it was fluff.  Considering the other =
fluff
that is sent to this list, I certainly appreciated the message. It made =
me
pause to think about getting that physical I've neglected to get for =
years.
Also, men get breast cancer.  I have a friend who noticed a breast lump =
when he
was about 55 years old, turned out to be cancer.  Treatments ensued.  His =
wife
and friends were scared but thank goodness he'll be fine.  Sorry for the =
long
quote that follows but I wouldnt do justice by editing it.

Barbara

-------------------------
Nathalie wrote:

> >Please send this on to anyone you would like to remind of the
> >importance of breast cancer awareness
>
> what is this doing on the LX list?
>
> you might as well mention prostate cancer or lung cancer
> also silicon breasted women and too tight bras
>
> hey,  you want to buy one of my red ribbons? - the money goes to a ram
> upgrade and double speed ;)) ..... so i can organise a nationwide =
prostate
> cancer day pink ribbon sales campaign
> (we need you guys to keep us happy and satisfied :))))

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 10:11:45 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MARK <mpmark@TISCALINET.IT>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         MARK <mpmark@TISCALINET.IT>
Subject:      R:      Windows 98 & FAT32 File System
Comments: To: Loran Brooks <lbrooks@COOLLINK.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Ihave W98 with FAT32 and am using cpack regulrely
Ciao

----- Original Message -----
From: Loran Brooks <lbrooks@COOLLINK.NET>
To: <HPLX-L@UCONNVM.UCONN.EDU>
Sent: Sunday, October 31, 1999 5:55 PM
Subject: Windows 98 & FAT32 File System


> I just upgraded my PC from Windows 95 to Windows 98.
>
> It was suggested to change from FAT16 to FAT32 file system to improve
> Windows performance and space utilization.
>
> Before I change, I'd like to ask the group if this will have any affect on
> using CPACK or some very old DOS programs.
>
> I use both CPACK to backup my HP200 and to access HP files (phone book,
> database, memo, etc.).
>
> I also use Turbo Pascal v3.0 on my PC when developing programs for the
> HP200.
>
> Can anyone tell me if changing to FAT32 will interfere with these
> operations?
>
> Thanks in advance,
>
> L. Brooks
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 07:11:26 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: vCard and vCalendar work
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Has anyone worked with the vCard and vCalendar formats
> (http://www.imc.org/pdi)? I have played with a perl script on my UNIX
> boxes that take my phone.pdb file and turns it into a vCard file that I
> can use with Gnome's Address Book application. I have not, yet, done =
the
> same thing for the HP Appointment file, but I plan on doing so.

See www.dasoft.com and check out PIM.ZIP there.  The author included a =
program
to convert the built-in appointment book into vCalendar fortmat, since =
PIM can
import vCalendar files into its format.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 07:11:29 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: (FLUFF - shared birthdays)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> We anticipate numerous prizes for first 1/1/2000 birth, in fact,
> some locations had contests 40 weeks prior to 1/1/2000, and
> if one of those folks that stayed at the hotel 40 weeks prior to
> (one year before) the new millenium then they will get prizes.

Just for general information, a pregnancy is normally 38 weeks from =
conception
to birth.  We usually measure it as 40 weeks from the woman's last =
menstral
period, however, since that is easier to fix a date to.  If you are =
trying to
have a baby due on Jan. 1st then you should have tried for conception 38 =
weeks
before new year's day.  A quick check in my palmtop's Appointment Book =
shows
that would have been Saturday, April 10th.

Steve Carder MD (Family Practice)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 07:12:17 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: CPack vs Transfile (was: CPack Question and others)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

>    >QUESTION: Who is in the position to ask HP to donate CP to
>    >the public domain now?
>
> Maybe Thaddeus? ... or someone with contacts at HP.  With the 200LX leaving
> the scene come November, maybe HP won't consider CP as a profit/liability
> issue anymore.>>
>
> Actually, I asked some months ago.  I think it may happen eventually.

I'd be less optimistic. All HP's calculator wisdom is in the CALC section of
CPACK. I would not give that away if I were HP ;-)


HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 07:19:32 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rachmat Irfan <irfan@KSEI.CO.ID>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE>
Subject:      Halloween Nightmare+Avi
Comments: To: Rachmat Irfan <irfan@KSEI.CO.ID>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Irfan wrote:


"Replace all the battery, include back up battery.
Wait for several minutes.
Then try again to put all the battery into your LX.
Press on button
Hope this would help...."

But then he will lose the data on the C drive,and as I understood it=
 he didn't want that to happened.

To this discussion I would like to add my own experiences.
The first LX I bought was totally impossible,often it froze and nothing=
 helped except replacing all the batteries,including the backup.Every=
 time I losed my C drive.I demanded a new one and the saler in question=
 offered me a demo which never had frozen according to him.He told me=
 also that some ex of HP200 was totally impossible when others never=
 froze.
The one I got has so far(two years) worked splendidly,not one time I=
 have needed to replace either the battery nor the backups.Answers very=
 well on resets.

I wonder if it is perhaps like Avi said abuot the databases,one camp=
 has never problems while another camp continously faces problems with=
 frozen LXs which responds to no resets?


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 1 Nov 1999 22:11:42 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Speed upgrade

How do you do that???

Semper mobilis,
yor pal al :-) .............

><fjkaufman@WORLDNET.ATT.NET> wrote:
>
>> Battery life - pure and simple.  And keeping it pure and simple:  No
>> drivers - no blurry screen.
>
>The screen on my new 200LX DS is not blurry even if I do not
>load the 2X driver.
>
>Vic
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 07:50:53 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Padin <epadin@WAGWEB.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Padin <epadin@WAGWEB.COM>
Subject:      Re: Fluff:Please read and do what you think is right

<rant>
Oh, wnderful! Another 'read this and send to everyone' chain letter. When
are people finally going to realize that this stuff is junk? Okay, everyone
repeat after me "If an email says something like 'send this to other people'
it is to be _DELETED_!!!".
</rant>

I understand that breast cancer and many other diseases require public
awareness but this is not the appropriate forum. So, next time, try
alt.support.cancer.breast and alt.support.breast-implant usenet groups. You
can go here if you want to post there: http://www.deja.com

I'm sorry but this response is what I feel is right.


>-----Original Message-----
>From: Russell Hemery mailto:rhemery@POWERUP.COM.AU
>Sent: Sunday, October 31, 1999 4:30 PM
>To: HPLX-L@UCONNVM.UConn.Edu
>Subject: HPLX-L Fluff:Please read and do what you think is right
>
>
>A handsome, middle-aged man walked quietly into the cafe and sat down.
>Before he ordered, he couldn't help but notice a group of
>younger men at
>the table
>next to him.  It was obvious they were making fun of something about
>him,

SNIPT big sappy story...

> This is breast cancer awareness month.  Do regular breast self-exams
>and
>have  annual mammograms if you are a woman over the age of 40.  And
>encourage those  women you love to do the same.
>
> Please send this on to anyone you would like to remind of the
>importance
>of breast cancer awareness.
>
>A CANDLE LOSES NOTHING BY LIGHTING ANOTHER CANDLE

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 14:41:35 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Mobile phone emulation for the Palmtop
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 1 Nov 1999 14:19:56 -0800, Stefan Peichl <Stefan.Peichl@T-ONLINE.DE> wrote:

> Andreas Garzotto and myself are still feverish searching for a
> solution of the problem, why the palmtop is a receiver for
> stray RF signals, which hamper good IR connections with mobile
> phones like the S25.

I hope that you guys can find a solution to this problem. As you know I
have ordered the new Nokia 7110. It does not have a metal casing so it
"should" produce the same problems as the S25. :-(((

Hans Staber mailed me and asked me on advice on what mobilephone he
should get. Andreas uses a 8810 which works. Tomas Moberg used a Sh888
and it worked (it got a metalcase Tomas?)

The S25 has problems. I guess the T28 and all other Ericssons which
needs a external irdongle will also have problems. The 7110 will also
have problems.

The only phones left are the new Nokia 8850 which should be even
"better" then the 8810 because of its "real" alu casing.

I do not know if the new Ericsson R320 has a metal case. But neither
the R320 or the 8850/7110 are released yet.. Nokia has stopped the
productions on the Nokia 8810.

So Hans I would recommend that you wait to Q1 2000 to choose a phone..
I wrote you a mail also..

Hplx
If I open the hplx and insulate the inside with plasticoated alufoil.
Would this be a good idea? What components needs to be shielded inside
the hplx? If I do this is it enough to prevent noise?

I guess I could just get a psion or something else. I could also get
another phone, but I want to stay with the hplx and the Nokia 7110..

I hope the problems with the 7110 will be minor (as the 8810?)..

> http://peichl.hplx.net/ring.zip

I downloaded the program and I am sad to say that it works :-)

> You can have *A LOT* of fun with this programm, but you may

Hmm my friends will be amazed.. Some of them thinks that gsm can be
"tapped" as walkie talkies so I guess they are in for a hard time.. :-))

Could you make this program into a tsr? Then you can maybe use it in
meetings to alert you of incoming calls/sms or something.

Maybe you could modify the program so you can have the screen flash
instead of the ring tone to alert about incoming call/sms.

But please focus on the work on what needs to be done to the hplx to
stop this program working :-))

--
Martin Bergvill Narvik, Norway

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 10:15:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Padin <epadin@WAGWEB.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Padin <epadin@WAGWEB.COM>
Subject:      FLUFF: link to a real palmtop road warrior

http://www.micapeak.com/stories/DougRuth/

This guy's got some interesting stories to tell. He rides a hog and carries
a 200lx... that's my kinda guy!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 15:20:55 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              b.newins@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Newins <b.newins@WORLDNET.ATT.NET>
Subject:      Re: How many new 200LX's should we buy for resale?
Comments: To: d dv <ddvteach@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Domingo,

Be careful.  Lithiums have about 5500 mah power.  They work
at higher voltages during most of their life.  If you have
software to read voltage you will be OK if you change them
around 2.6 v.  They are 95-98% used by then.  They die
quickly after that.  I have been only lithiums since they
first came on the market.      =Bob=

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 07:23:06 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Speed upgrade
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

I think Mack or Hal (or someone else) has mentioned before that minor production
differences between LX units may account for why some people get blurred screens
and others do not.

My screen is blurred before the loading of the driver, to the point where
dropping to DOS and entering any more than a few commands requires an act of
faith.

So I can understand the position of those who don't want to upgrade.... unless
they'd be guaranteed a unit that was completely readable even sans 2x driver
(which I doubt Thaddeus can/will do).

Those of you who have non-blurred units can count yourself lucky during a boot
failure.  The rest of us, we just have to use the Force <g>.

- Longden





Victor Roberts <robertsv@IX.NETCOM.COM> on 11/01/99 07:39:27 PM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Victor Roberts <robertsv@IX.NETCOM.COM>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: Speed upgrade




On 30 Oct 1999 08:27:07 -0700, "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET> wrote:

> Battery life - pure and simple.  And keeping it pure and simple:  No
> drivers - no blurry screen.

The screen on my new 200LX DS is not blurry even if I do not
load the 2X driver.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 07:24:47 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: CPack vs Transfile (was: CPack Question and others)
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

OTOH, it can be argued that any remaining HP wisdom went out the Windows long
ago ...

- Longden





Hans Peter Staber <hpstaber@COMPUSERVE.COM> on 11/02/99 04:12:17 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to hpstaber@COMPUSERVE.COM

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: CPack vs Transfile (was: CPack Question and others)




>    >QUESTION: Who is in the position to ask HP to donate CP to
>    >the public domain now?
>
> Maybe Thaddeus? ... or someone with contacts at HP.  With the 200LX leaving
> the scene come November, maybe HP won't consider CP as a profit/liability
> issue anymore.>>
>
> Actually, I asked some months ago.  I think it may happen eventually.

I'd be less optimistic. All HP's calculator wisdom is in the CALC section of
CPACK. I would not give that away if I were HP ;-)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 10:30:58 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: Arachne
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue,  2 Nov 1999 10:11:39 -0500 (EST)

I ran ARACHNE a few months back...looked promising, but ran very slow!
Still, it worked.

07h29m21s ago ...
On Tue, 2 Nov 1999, Lars =3D?iso-8859-1?q?Hedstr=3D94m?=3D wrote:

> Heloo,I wonder if there is anyone on the list who have tried
> this program Arachne...


*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 10:31:01 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      ADMIN: Fluff/OffTopic posts
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue,  2 Nov 1999 10:17:52 -0500 (EST)

Hi:

  Just a reminder to keep posts to this list Palmtop related(at least
  loosly palmtop related ;-) ).

  Subjects I would consider inappropriate:

  - Non computer related "public awarness" messages

  - Political Opinions

  - Religious Opinions

  etc...

I don't mean to be "hard-hearted", but if we don't keep to the topic
that brought us here, we will start to lose membership.

Please use private communications for not LX issues whenever possilble.

THANKS!

*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 07:04:06 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Arachne

What is the URL?????

Semper mobilis,
yor pal al :-) .............

>Heloo,I wonder if there is anyone on the list who have tried
>this program Arachne:
>
>      Arachne   76,264 downloads
>Free download 938K
>    Description
>      Arachne is a DOS browser that includes a freeware PPP
>dialer and MPEG and WAV players. It also supports most of the
>basic toolbar functions found in Netscape Navigator and
>Microsoft Internet Explorer. Other features include support for
>High Color modes, user-friendly PPP setup with modem
>autodetection, and the ability to print HTML pages to
>PostScript. One key new feature in this release is the ability
>to download more than one image at once. It also fixes several
>bugs.
>
>
>       Quick Facts
>      Company: xChaos software
>      Version: 1.47 beta
>      Release date: February 4, 1999
>      File size: 938K
>      Approx. download time: 4 min. at 28.8 kbps
>      Downloads: 76,264
>      License: Shareware
>      Minimum requirements: 450K RAM (575K with PPP), SVGA
>
>
>Lars Hedstroem/Sweden
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 10:50:14 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Padin <epadin@WAGWEB.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Padin <epadin@WAGWEB.COM>
Subject:      Re: Arachne

I looked at this a while ago. It seemed slow... but it worked. I think that
it may also work with an ethernet ppp driver. That would probably make it
the best 'free' alternative to HV.

>-----Original Message-----
>From: nxw988e@TNINET.SE mailto:nxw988e@TNINET.SE
>Sent: Tuesday, November 02, 1999 2:42 AM
>To: HPLX-L@UCONNVM.UConn.Edu
>Subject: HPLX-L Arachne
>
>
>Heloo,I wonder if there is anyone on the list who have tried
>this program Arachne:
>
>
>
>      Arachne   76,264 downloads
>Free download 938K
>    Description
>      Arachne is a DOS browser that includes a freeware PPP
>dialer and MPEG and WAV players. It also supports most of the
>basic toolbar functions found in Netscape Navigator and
>Microsoft Internet Explorer. Other features include support for
>High Color modes, user-friendly PPP setup with modem
>autodetection, and the ability to print HTML pages to
>PostScript. One key new feature in this release is the ability
>to download more than one image at once. It also fixes several
>bugs.
>
>
>       Quick Facts
>      Company: xChaos software
>      Version: 1.47 beta
>      Release date: February 4, 1999
>      File size: 938K
>      Approx. download time: 4 min. at 28.8 kbps
>      Downloads: 76,264
>      License: Shareware
>      Minimum requirements: 450K RAM (575K with PPP), SVGA
>
>
>Lars Hedstroem/Sweden
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 09:50:25 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: Arachne
MIME-Version: 1.0
Content-Type: text/plain

Were you running it on a DS unit?

Steve

        -----Original Message-----
        From:   Al Kind SMTP:MCHEM1@UCONNVM.UConn.Edu
        Sent:   Tuesday, November 02, 1999 7:31 AM
        To:     HPLX-L@UCONNVM.UConn.Edu
        Subject:        Re: Arachne

        Tue,  2 Nov 1999 10:11:39 -0500 (EST)

        I ran ARACHNE a few months back...looked promising, but ran very
slow!
        Still, it worked.


** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 09:55:32 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rudy Moore <orn@UPL.CS.WISC.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rudy Moore <orn@UPL.CS.WISC.EDU>
Subject:      LCD flakiness
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Occasionally, when I turn on my 200LX the LCD flashes black lines -
like its refresh circuitry isn't working quite right. This just started
happening recently and so far hasn't gotten any worse.  Anyone else
have experience with this kind of problem?

Thanks!
Rudy Moore

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 09:53:42 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Roleigh Martin <rol@UHC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Roleigh Martin <rol@UHC.COM>
Subject:      Newton keyboard w/HP200 -- anybody lose keystrokes on a plane?
Comments: To: Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
In-Reply-To:  <Pine.A41.4.10.9911011829250.173392-100000@rainbow.burnside
              .powells.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Hi,

The one time I like to use the Newton keyboard is when I'm on a plane but I
found myself losing keystrokes on the plane.  I have no idea why this happened.
Anybody else have this problem?  I think I also had the problem once on the
ground too.

Does the keyboard require fully charged batteries to work?

It has not worked faultlessly for me but when it does work, it is great.

Roleigh Martin

At 06:38 PM 11/01/1999 -0800, you wrote:
>...
>By the way, the Newton keyboard is great.  It has worked faultlessly for
>me so far, and it has an excellent "feel".  Highly recommended if you do a
>lot of typing on your LX.
>
>Ain Vale
>Portland, Oregon
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

------------------------------------------------------------------
Roleigh Martin http://ourworld.compuserve.com/homepages/roleigh_martin
      ( easy to remember alias is: http://webalias.com/roleigh )
    (A Web Site that focuses on Y2k threat to Utilities, Banks & more)
To subscribe to free e-letter, fill in the form at the bottom of the page:
    http://ourworld.compuserve.com/homepages/roleigh_martin/myegroup.htm
               To unsubscribe, send "unsubscribe" message to
                  roleigh_for_web-unsubscribe@egroups.com
Print out this Y2K brochure to give to your neighbors, friends & relatives:
     http://ourworld.compuserve.com/homepages/roleigh_martin/brochure.htm

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 09:58:39 -0600
Reply-To:     Mack Baggette <mack@times2tech.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mack Baggette <mack@TIMES2TECH.COM>
Organization: Times2 Tech
Subject:      Re2: Speed upgrade
In-Reply-To:  <8825681D.0054BA93.00@n-smtpmta.candle.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hello,

LL> Those of you who have non-blurred units can count yourself lucky during a boot
LL> failure.  The rest of us, we just have to use the Force <g>.

or just use a flashcard as there is minimal force required for that. :-)

Cheers,
 Mack                            mailto:mack@times2tech.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 11:02:14 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      OT:Fluffiness...
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue,  2 Nov 1999 10:47:25 -0500 (EST)

Hi gang -

Is it just my imagination, or has the palmtop-related content of the
list dropped below about 30 percent?   Seems to be mostly fluff
lately.   We have threads on dining in Vegas, shows in Vegas, shared
birthdays, cancer etc.   OK - cancer definitely isn't fluff, but it is
way off topic.


Sorry - grumpy this morning...

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 10:21:30 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      Re: ApptBook: convert ToDo -> Appt?
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

From: Rachmat Irfan <irfan@KSEI.CO.ID>

> Theodore Heise wrote :
>
> {Enter}{Copy}{F3}{F2}c:\_dat\tmp-note.txt{Enter}{F10}{F10}{F9}
> {F2}{Paste}{F3}{F3}c:\_dat\tmp-note.txt{Enter}{Enter}{F10}{Tab}
>
> Isn't it should look like this :
>
> {Enter}{Copy}{F3}{F2}c:\_dat\tmp-note.txt{Enter}{F10}{F10}{F9}
> {F2}{Paste}{F3}{F3}c:\_dat\tmp-note.txt{Enter}{F10}{F10}
>
>Compare to mine ...


Well, yes and no.  I *do* have an extra {Enter} as the 3rd from
last command.  I think when I recorded the macro I got a "file
not found" error message, hit Enter to clear the message, and
never cleaned it out.  It isn't fatal, as it simply adds a CR
at the end of the note, but it's certainly less inelegant out.

I end the macro with {Tab} rather than {F10} because I want an
opportunity to adjust the appointment time before closing it.

Thanks for the review, Rachmat!

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 11:36:48 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: Arachne
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue,  2 Nov 1999 11:27:39 -0500 (EST)

Yes...2x32MB 200LX

37m14s ago ...
On Tue, 2 Nov 1999, Steve Dowell wrote:

> Were you running it on a DS unit?
>
>        From:   Al Kind SMTP:MCHEM1@UCONNVM.UConn.Edu
>
>         Tue,  2 Nov 1999 10:11:39 -0500 (EST)
>
>         I ran ARACHNE a few months back...looked promising, but ran =
very
> slow!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 11:18:41 -0400
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Leo Shepherd <Leo.Shepherd@FAA.GOV>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Leo Shepherd <Leo.Shepherd@FAA.GOV>
Subject:      Thin Fax has arrived
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

     Al,

     The thin fax is here.  I'll get a check off later today or Wed for
     $40.

     Thanks again,

     Leo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 08:50:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Re2: Speed upgrade
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

I agree with Mack.  Loading the drivers from the flashcard is a good "failsafe"
solution.

Everyone who wants to upgrade to 2x should 1) copy the correct drivers from the
C drive (or floppy) to the flash card(s) they want to boot from, and 2) modify
their config.sys on their boot-up flashcards to load the correct driver from the
card.  This is mentioned in the SPD31.DOC file that came with my upgrade. And
when new drivers become available, they have to remember to upgrade all versions
(internal drive and flashcards).

I think it takes a minimum amount of "under the hood" talent to get this
working, but sometimes it doesn't become apparent why you need to do this until
you get bitten.  For instance, I initially modified my flashcard boot to load
the drivers from the internal drive (I mean, why use two copies, right?.... plus
it's faster loading from internal drive vs flashcard).  As Jeff Johns might say,
"I'm not the brightest bulb in the chandelier", but this slip almost made for a
major disaster when the C drive went south one day.  An example of trying to be
too clever for my own good.

Too, remember that this requires more work on the part of users with blurred
screens than those without.  The latter group have a failsafe in always being
able to see their screens regardless of what happens, whereas the rest of us
have to be sure our safety devices are in place.

- Longden






Mack Baggette <mack@TIMES2TECH.COM> on 11/02/99 07:58:39 AM

Please respond to Mack Baggette <mack@times2tech.com>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re2: Speed upgrade




Hello,

LL> Those of you who have non-blurred units can count yourself lucky during a
boot
LL> failure.  The rest of us, we just have to use the Force <g>.

or just use a flashcard as there is minimal force required for that. :-)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 20:20:46 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Re: Arachne
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Heloo,I wonder if there is anyone on the list who have tried
> this program Arachne:

Jupp. Have tried it.
It works but not very smooth.
The CGA screen makes all graphics look bad when runing in the Arachne
EGA mode.

Interesting but not as usefull as HV with WWW/LX.(but cheaper!)

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 14:26:31 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: HPLX-L Digest - 30 Oct 1999 to 31 Oct 1999 - Special issue
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Ulrich,

> Netscape Communicator 4.61 still allows to import an address book from a text
> file in
> comma-delimited format. You'll have to do some work because you need to define
> the
> association between Netscape address book fields and CSV file fields when you
> import the file.

I think Avi mentioned something about a direct synch - something like an
import/export filter for *.adb files in Netscape menu's.

The guess was that the Netscape programmer must have been a palmtopper.


HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 21:09:39 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Strange error message when sending email withh post/lx
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

(I use www/lx)

I have problems with sending some mails.. I compose messages as
usually..

The messages have no attachments of any kind. They "look" normal. No
sig _attachments_ either..

When the messages are sent sometimes one email does not get sent and I get
this:

"Failure message not sent, file to include not found"

I can not send this message at all. Tried to change smtp but no
success.

What is wrong. I have tried to cut/paste the message body into a new mail
and try to send it, but I can not send it at all.. The emailadress is
correct. I will try to send the email to myself to see if there are
something wrong here. But I have had this problem with a Hotmailaddress
and a norwegian online.no address.

I do not think that I have made any changes to www/lx.

What triggers this error message? What can I do? I have not found any
pattern yet to which message will trigger the error message.

TIA

--
Martin Bergvill Narvik, Norway
Tlf:+4776941462 Mob:+4790199462
Mailer:Hp200 Lx with Post/Lx
"This is probably the best button to press"
-From the Hitchhikers Guide to the Galaxy
--- end of forwarded message ---


--
Martin Bergvill Narvik, Norway
Tlf:+4776941462 Mob:+4790199462
Mailer:Hp200 Lx with Post/Lx
"This is probably the best button to press"
-From the Hitchhikers Guide to the Galaxy

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 20:35:42 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Mobile phone emulation for the Palmtop
Comments: To: Stefan.Peichl@T-ONLINE.DE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi Stefan,

> http://peichl.hplx.net/ring.zip

Genial!=20

Aber dazu ein kleiner Verbesserungsvorschlag:
_richtig_ sinnvoll w=E4re das Programm, wenn es ein TSR w=E4re, das einen
Anruf nicht akustisch, sondern optisch mit einem kleinen pop-up-Fenster
=FCber der aktuellen Anwendung signalisieren w=FCrde.

So k=F6nnte ich bei der Arbeit sehen, wenn mein Handy in der Tasche unter
dem Tisch ungeh=F6rt vor sich hinklingelt (mit ausgestelltem Klingelton).

Ich schlage allerdings vor, da=DF wir erstmal die S25-Probleme l=F6sen, u=
nd
danach zu neuen Ufern in Sachen ring indicator aufbrechen! :-)

(Falls das dann noch m=F6glich ist, und wir nicht unsere LXs v=F6llig geg=
en
alle Arten von elekromagnetischen Wellen abgeschirmt haben ;-) )

GTX
daniel

--                                                     =20
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------
                                                        =20

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 08:31:10 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: Off-topic: Top metrication advocates in USA?
Comments: To: Feher Tamas <etomcat@EGON.GYALOGLO.HU>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I think you may be the only one interested ;)

Seriously though, I think the adoption of the Metric system
will (probably) never happen, as it is a solution to a problem
that doesn't exist...

The cost of "metrification" would be tremendous, and the debate
falls apart when you ask advocates "Why should we adopt the
metric system?"

When I was in elementary school (ages 6-12) there was a great
concern with teaching us the Metric system (1970 - 1976), but
that was the last I heard of it...

Ken
khansen@njcc.com

-----Original Message-----
From: Feher Tamas <etomcat@EGON.GYALOGLO.HU>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Tuesday, November 02, 1999 4:44 AM
Subject: Off-topic: Top metrication advocates in USA?


>    Hello all,
>
>I've been trying to learn more about how conversion to
>the SI (metric) system in USA is going or idling.
>
>One thing I couldn't find out is whether there are
>advocates of conversion in the Congress or Senate. I
>mean some representatives who are strongly comitted
>and speak out for acceleration of switching units.
>
>Seems like they are not mentioned anywhere on Web,
>or maybe there aren't any for fear of loosing voters.
>Can you enlighten me?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 08:27:58 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russell Hemery <rhemery@POWERUP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russell Hemery <rhemery@POWERUP.COM.AU>
Subject:      Re: HPLX-L Digest - 30 Oct 1999 to 31 Oct 1999 - Special issue
Comments: To: hpstaber@COMPUSERVE.COM
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

>I think Avi mentioned something about a direct synch - something like an
>import/export filter for *.adb files in Netscape menu's.

Hi all

I believe this was in Netscape 2.0 and it was a specific HPLX import/export
feature.

Anyone have that version of Netscape still?

Russell

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 10:45:16 +1300
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, lodger@NZ1.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Roger Whitmarsh <lodger@NZ1.IBM.COM>
Subject:      Re: Off-topic: Top metrication advocates in USA?
Comments: To: Ken Hansen <khansen@NJCC.COM>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Ken Hansen wrote:
>The cost of "metrification" would be tremendous, and the debate
>falls apart when you ask advocates "Why should we adopt the
>metric system?"

So why did you adopt a metric currency system when there was a perfectly
good imperial system (Pounds, Shillings and Pence) already in use? <g>

Cheers, Roger

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 14:19:49 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Donglok Kim <dong@ICSL.EE.WASHINGTON.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Donglok Kim <dong@ICSL.EE.WASHINGTON.EDU>
Subject:      HisWord missing verses in John ch. 13-15
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

I have HisWord on my palmtop (AV) but John ch. 13 - 15 are not showing up
(just the verse numbers). Anyone has the same problem?

Donglok Kim

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 17:39:22 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Carole Kilpatrick <ckilpatr@US.ORACLE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Carole Kilpatrick <ckilpatr@US.ORACLE.COM>
Organization: Oracle Corporation
Subject:      WORLD.PDT DATABASE
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="------------70084C7C01D31BDCC429ACDB"

This is a multi-part message in MIME format.
--------------70084C7C01D31BDCC429ACDB
Content-Type: multipart/alternative;
 boundary="------------7C24F0907346AAAB18F80DB0"


--------------7C24F0907346AAAB18F80DB0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Greetings:

I trashed my WorldTime database (backup, too);  is another one available
for download and, if so, where?

Thanks!

Carole

--------------7C24F0907346AAAB18F80DB0
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<font face="Arial,Helvetica">Greetings:</font><font face="Arial,Helvetica"></font>
<p><font face="Arial,Helvetica">I trashed my WorldTime database (backup,
too);&nbsp; is another one available for download and, if so, where?</font><font face="Arial,Helvetica"></font>
<p><font face="Arial,Helvetica">Thanks!</font><font face="Arial,Helvetica"></font>
<p><font face="Arial,Helvetica">Carole</font></html>

--------------7C24F0907346AAAB18F80DB0--

--------------70084C7C01D31BDCC429ACDB
Content-Type: text/x-vcard; charset=us-ascii;
 name="ckilpatr.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Carole Kilpatrick
Content-Disposition: attachment;
 filename="ckilpatr.vcf"

begin:vcard
n:Kilpatrick;Carole
tel;cell:248.760.4401
tel;fax:248.816.8270
tel;work:248.614.5117
x-mozilla-html:FALSE
version:2.1
email;internet:ckilpatr@us.oracle.com
title:Senior Customer Advocacy Manager
adr;quoted-printable:;;Oracle Corporation=0D=0A3290 West Big Beaver Road=0D=0ASuite 300;Troy;Michigan;48084;USA
x-mozilla-cpt:;-11840
fn:Carole Kilpatrick
end:vcard

--------------70084C7C01D31BDCC429ACDB--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 17:43:29 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Off-topic: Top metrication advocates in USA?
Comments: To: Feher Tamas <etomcat@EGON.GYALOGLO.HU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I've been trying to learn more about how conversion to
> the SI (metric) system in USA is going or idling.

It isn't going at all.  It's amazing how backward we can be.  :-(

Individual groups/organizations/companies are free to go metric, and
some have, but there is no national drive to complete the move.

Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 09:50:55 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russell Hemery <rhemery@POWERUP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russell Hemery <rhemery@POWERUP.COM.AU>
Subject:      Re: WORLD.PDT DATABASE
Comments: To: Carole Kilpatrick <ckilpatr@US.ORACLE.COM>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

>I trashed my WorldTime database (backup, too);  is another one available
>for download and, if so, where?

>Content-Type: text/x-vcard; charset=us-ascii;
> name="ckilpatr.vcf"
>Content-Transfer-Encoding: 7bit
>Content-Description: Card for Carole Kilpatrick
>Content-Disposition: attachment;
> filename="ckilpatr.vcf"

Hi Carole

You will find world time database on your palmtop.

D:\_sys\world.dat

Also may I suggest you change your email prog to not send HTML and sig file
to this list.

Russell

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 22:03:46 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peter Auer <peter.auer@ONLINE.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peter Auer <peter.auer@ONLINE.DE>
Subject:      Re: PCMCIA Disks Available!
Comments: To: smoore <smoore@EFFECTNET.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hello Scott,

do you send this card also to Germany???

tia

Pete

smoore wrote:
>
> I  have (9) 20 Meg PCMCIA Flash Disks ATA Type II available. They are in
> excellent condition. They have only been used a  very few times on
> testing a couple new prototype products at work. I sell (1) 20 Meg
> PCMCIA disk for $35.00 plus $5.00 shipping and I sell (2) disks for
> $65.00 plus $5.00 shipping. I accept Money Orders Only! and you can send
> payment to my address at:
>
> Scott Moore
> 20455 S.W. Kirkwood Street
> Beaverton, Or 97006
>
> I will email you back  the day I receive your payment and let you know
> that your disks our on the way. I always send out next day unless I
> receive your payment on a Saturday and then I will send them out on
> Monday. Please email me and let me if you are interested and when you
> are sending payment so I can hold your disks for you. The response has
> been tremendous and the people I have worked with on this group have
> been great.  Thanks alot!   Scott
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 15:29:41 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      Solar gadgets and more
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Found a site with lots of solar gadgets for those interested:
http://www.realgoods.com/

They've got more, but I was only interested in the solar gear.

Philippe

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 01:18:23 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Fluff:Calling with AT/T from Chicago to Norway $1.6?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

I am so sorry to send this to the list. (There will be no more Fluff
from me after this one). But I do not have anywhere else to send it..

This is for those from America on the list:

A friend of mine was Au Pair in Treamont Lane Valparaiso outside Chicago
this summer. She just got the phonebill for her calls home..can this
be correct?:

40 minutes=$64
22 minutes=$35.20
49 minutes=$78.40
47 minutes=$75.20
===================
158 minutes for $252,80!

Thats $1.6 per minute

She used AT/T. All calls was made in the afternoon/evening.

If I call from Norway to the Us I pay approx $0.23 and 158 minutes
would be $37.

I would be gratefull if somebody from Chicago or the Us can tell me if
this bill is for real. She didn't get a printout, but was told what to
pay by her "Us mum"

TIA

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 18:35:41 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Fluff:Calling with AT/T from Chicago to Norway $1.6?

She and Yu say ATT but if she wuz SLAMMED (substituted by
another phone company, the bill may be just so.

Semper mobilis,
yor pal al :-) .............

>I am so sorry to send this to the list. (There will be no more Fluff
>from me after this one). But I do not have anywhere else to send it..
>
>This is for those from America on the list:
>
>A friend of mine was Au Pair in Treamont Lane Valparaiso outside
>Chicago
>this summer. She just got the phonebill for her calls home..can this
>be correct?:
>
>40 minutes=$64
>22 minutes=$35.20
>49 minutes=$78.40
>47 minutes=$75.20
>===================
>158 minutes for $252,80!
>
>Thats $1.6 per minute
>
>She used AT/T. All calls was made in the afternoon/evening.
>
>If I call from Norway to the Us I pay approx $0.23 and 158 minutes
>would be $37.
>
>I would be gratefull if somebody from Chicago or the Us can tell me if
>this bill is for real. She didn't get a printout, but was told what to
>pay by her "Us mum"
>
>TIA
>
>--
>Martin Bergvill Narvik, Norway
>-Palmtop friendly sig...
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 18:52:19 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      S.U.P.E.R. Update
Comments: cc: supernew@palmtop.net
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

The S.U.P.E.R. page has been updated with a lot of exciting calculator
programs, compliments of The Palmtop Paper. I apologize for having to =
send
this message manually but there are some new and exciting things going on =
at
the palmtop.net site and for right now the automatic email which is sent
upon an update to S.U.P.E.R. is currently 'out of commission'.

I think everyone will really enjoy the new format of the S.U.P.E.R. pages
and the download times should be greatly reduced with the new format. To
check out the latest files, point your browser at
http://www.palmtop.net/supernew.html

Jeff
SUPER Team

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 02:06:02 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: S.U.P.E.R. Update
In-Reply-To:  <199911030052.SAA15361x@scott.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 2 Nov 1999, Jeff Johns wrote:

> The S.U.P.E.R. page has been updated with a lot of exciting calculator
> programs, compliments of The Palmtop Paper. I apologize for having to send
> this message manually but there are some new and exciting things going on at
> the palmtop.net site and for right now the automatic email which is sent
> upon an update to S.U.P.E.R. is currently 'out of commission'.

A lot of nice programs added, but why do the descriptions not follow the
usual style? a lot of the new descriptions do no tell whether the program
is free or shareware or commercial, and all of a sudden there are postal
addresses in there too. What has happened?

Also, I find the following addition particularly interesting:

---
PC Therapist (0 KB) added 10/26/1999
Version 4.0 by Thinking Software

Courtesy of The HP Palmtop Paper
Artificial Intelligence:offsite, commercial ware. This is the program that
won the Loebner prize for AI programs in 1991-92. It works on older
desktops but requires an EGA monitor.
---

The program isn't available for download, since it's commercial but the
description says it requires EGA (which the palmtop doesn't have) to run.
What's it doing there, then?

I don't really want to complain or make too big a deal out of it (SUPER is
a free service after all), but the new additions don't look as nice or
easy to read as the old ones, if you ask me.


Useful additions, though.


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 18:59:23 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Getting together at COMDEX
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

Does anyone want to get together at COMDEX?  The problem will be finding a
time and place. The only free time I have for sure of any length is on
Sunday for brunch at 11:30. That might be too early for some. If someone has
another time suggestion, I will do my best to make it.

I will have a backlit palmtop prototype for people to give their opinions.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 19:27:04 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff <jeffj@SCOTT.NET>
Subject:      Re: S.U.P.E.R. Update (fwd)
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Ack, this message was supposed to go to the entire list and not just
Laust, so here it is.


---------- Forwarded message ----------
Date: Tue, 2 Nov 1999 19:17:18 -0600 (CST)
From: Jeff <jeffj@koala.scott.net>
To: Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject: Re: S.U.P.E.R. Update

On Wed, 3 Nov 1999, Laust Brock-Nannestad wrote:

> A lot of nice programs added, but why do the descriptions not follow the
> usual style? a lot of the new descriptions do no tell whether the program
> is free or shareware or commercial, and all of a sudden there are postal
> addresses in there too. What has happened?

In an effort to get the additions done as quickly as possible, I used
databases provided by Thaddeus and didn't get the chance to actually try
all the programs and merely relied on the provided descriptions. I'll
take the blame for not saying whether or not it is freeware or shareware.

> Also, I find the following addition particularly interesting:
>
> ---
> PC Therapist (0 KB) added 10/26/1999
> Version 4.0 by Thinking Software

This was removed from the list around 1800hrs, my local time, tonight and
is no longer showing on the supernew page.

> I don't really want to complain or make too big a deal out of it (SUPER is
> a free service after all), but the new additions don't look as nice or
> easy to read as the old ones, if you ask me.

I'm trying.... I really am trying..... I spent three hours messing with
it last night correcting a lot of errors and have only had about 8 hours
of sleep over the past couple of days, due to surgery that my wife had.
I mainly wanted to get the files posted so folks could use them. Once
again, I'll take responsibility for any and all errors and for the way it
looks.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           - Seek the truth & sound the alarm!  Ezekiel 33:3 -
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 02:24:49 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Off-topic: Top metrication advocates in USA?
Comments: To: Feher Tamas <etomcat@EGON.GYALOGLO.HU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

You may recall hearing about a Mars satellite the went splat on Mars.
It splat appears to have been the result of mixed units.  That splat
also represents the US official efforts at conversion.

Maybe that will change after this wasteful disaster but I'm sure some in
Congress expect the rest of the world to convert back and follow the
US!!!!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 02:25:12 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: HELP: Halloween Nightmare
Comments: To: Raffaele Gaioni <gaioni@CS.UNIBO.IT>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Even with a lockup, you should only remove the batteries if nothing else
works including first trying a HARD RESET

You can try a hard reset.  Press all at the same time: Ctrl-LeftShift-On
and answer no to the the C: drive initialization query.

At this point, you may have lost your data.  But try the above.  If you
don't get a Question about the c: drive, your data will already be gone.

Good luck.

And one of those actions was a self-test, which you should also not run
unless very careful.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 02:25:38 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Fluff:Calling with AT/T from Chicago to Norway $1.6?
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I am so sorry to send this to the list. (There will be no more Fluff
> from me after this one). But I do not have anywhere else to send it..

It is definitely possible.  Particularly since you mentioned AFTERNOON.
Business hour calling is subject to less discounting than evening calls.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 21:36:57 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Victor Roberts <robertsv@IX.NETCOM.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Victor Roberts <robertsv@IX.NETCOM.COM>
Subject:      Re: What would you do if this happened to you?
Comments: To: Nathalie Bugeaud <tps-seti@WANADOO.FR>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 31 Oct 1999, Nathalie Bugeaud <tps-seti@WANADOO.FR> wrote:

> > I have carried my Hp200 on El Al quite a few times (as carry on in a "bum
> > belt") with no problems and no questions asked.
>
> did you put the bum-belt(+LX) through x-ray or the magnetic detector
> door-frame?
>
> the latter, i was told, can delete files :(

Data on the LX will not be damaged by either the x-ray or the
metal detector.

Vic Roberts

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 20:29:34 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: How many new 200LX's should we buy for resale?
Comments: To: b.newins@worldnet.att.net
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

Thank you for the information. I finally changed batteries yesterday,
after a little over two months (not sure if 2 1/2 months). Really cool!
I watched them die for the last couple of days.  Kind of fast.  I wrote
an appointment to check the batteries in two months.

Domingo

On Tue, 2 Nov 1999 15:20:55 +0000 Bob Newins <b.newins@worldnet.att.net>
writes:
> Domingo,
>
> Be careful.  Lithiums have about 5500 mah power.  They work
> at higher voltages during most of their life.  If you have
> software to read voltage you will be OK if you change them
> around 2.6 v.  They are 95-98% used by then.  They die
> quickly after that.  I have been only lithiums since they
> first came on the market.      =Bob=
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 20:54:16 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Subject:      Re: MS Word....
Comments: To: Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>

Hi all,

Ain wrote:
>I've just downloaded Word from the Microsoft website
>onto the flash...

Old, DOS versions are free somewhere in Redmond-land?
Is it the DOS version or an old Win 3.x ver?

Praytell the URL!

Umm.... trying to ask a question, without a question mark, on a "lark".
Apologies, in advance!!

Translated: What is the URL?

And - have the "abandonware floodgates" opened somewhere?

--tim

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 11:03:46 +0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Eng. & Industrial Projects" <danaan@OPERA.IINET.NET.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Eng. & Industrial Projects" <danaan@OPERA.IINET.NET.AU>
Subject:      Re: Off-topic: Top metrication advocates in USA?
Comments: To: Ken Hansen <khansen@NJCC.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> The cost of "metrification" would be tremendous, and the debate
> falls apart when you ask advocates "Why should we adopt the
> metric system?"
> When I was in elementary school (ages 6-12) there was a great
> concern with teaching us the Metric system (1970 - 1976), but
> that was the last I heard of it...> Ken


Ummm.......and what was it that caused a little glitch to send a multi
million dollar space probe hurtling into the planet it was to probe
indirectly 8-)    Perhaps they should have kept metrics on the
school curriculum 8-)
Regards.......Liam
Western Australia (give a mm and we'll take a metre)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 19:04:45 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, qman@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Quinton Jones, Jr." <qman@EARTHLINK.NET>
Subject:      Re: Getting together at COMDEX
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hal Goldstein <hal_goldstein@THADDEUS.COM> wrote:

Does anyone want to get together at COMDEX?  The problem will be finding a
time and place. The only free time I have for sure of any length is on
Sunday for brunch at 11:30. That might be too early for some. If someone has
another time suggestion, I will do my best to make it.

I will have a backlit palmtop prototype for people to give their opinions.


    ----- Reply Separator -----



You can count me in Hal. I'm free all day and plan to attend the Keynote
Speaker (Bill) later on that evening.



Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

ccLXPOP - a cc:Mail conversion tool Version 1.05

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 19:44:18 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: S.U.P.E.R. Update

On behalf of all,
Tank you much Jeff.

Semper mobilis,
yor pal al :-) .............

>The S.U.P.E.R. page has been updated with a lot of exciting calculator
>programs, compliments of The Palmtop Paper. I apologize for having to
>send >this message manually but there are some new and exciting things
>going on at the palmtop.net site and for right now the automatic email
> which is sent >upon an update to S.U.P.E.R. is currently 'out of
commission'.
>
>I think everyone will really enjoy the new format of the S.U.P.E.R.
>pages and the download times should be greatly reduced with the new
format.
>To check out the latest files, point your browser at
>http://www.palmtop.net/supernew.html
>
>Jeff SUPER Team
>


___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 19:25:47 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Subject:      Re: MS Word....
In-Reply-To:  <199BBAE6DAABD2118CC90090272A7C4C310C0A@n3cdoimmail140m.army.mil>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

> Ain wrote:
> >I've just downloaded Word from the Microsoft website
> >onto the flash...
>
> Old, DOS versions are free somewhere in Redmond-land?
> Is it the DOS version or an old Win 3.x ver?

Tim-

Someone recently posted the URL, but I don't have it in front of me.  Go
to microsoft.com, then find the downloads page, then go to the
office downloads page.  It's listed under Office 97 downloads.

BTW, the URL posted to the list was the International English version.
There's an American English version which presumably doesn't force you to
spell 'color' with a 'u'.  The AmEng version filename ends in "eng", and
the IntEng version filename ends in "ben".  Curiously, the info page for
the International version has more detail than the American English one.

Ain Vale
Portland, Oregon, USA
has his own version of English

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 19:28:52 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Subject:      Re: MS Word....
In-Reply-To:  <199BBAE6DAABD2118CC90090272A7C4C310C0A@n3cdoimmail140m.army.mil>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 2 Nov 1999, Raymond, Timothy CPT--13CPAO wrote:
> Old, DOS versions are free somewhere in Redmond-land?
> Is it the DOS version or an old Win 3.x ver?

Sorry, forgot to include the version-- it's Word for DOS 5.5 .  I have a
cool (in my opinion) little SysMgr icon for it if anyone's interested.

I haven't been able to get Word to work other than in raw DOS; do I need
MaxDOS for this?

Ain Vale
Portland, Oregon, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 22:31:16 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: HisWord missing verses in John ch. 13-15
Comments: To: Donglok Kim <dong@icsl-gate.ee.washington.edu>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue,  2 Nov 1999 22:24:40 -0500 (EST)

05h04m50s ago ...
On Tue,  2 Nov 1999, Donglok Kim wrote:

> I have HisWord on my palmtop (AV) but John ch. 13 - 15 are not showing =
up
> (just the verse numbers). Anyone has the same problem?

I also have HisWord (AV) on my palmtop.  Those chapters in John are OK
in mine.  Maybe you need to download the AV files again...


Later

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 23:04:33 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: IBM.net --> attglobal.net
Comments: To: Lionel Zuckier <zuckier@AECOM.YU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Does anyone have experience using a palmtop and the above service provider
> to retreive email alone?  How about for www browsing?  Feel free to answer
> on or off-line.

I've been using IBM.NET for a couple of years and haven't had any
problems.  Its been sold to AT&T and I have until next October to
switch to using AT&T's domain name.

I do email and newsgroups with the 200LX (WWW/LX) and I browse with a
desktop.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 22:12:39 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff <jeffj@SCOTT.NET>
Subject:      Re: S.U.P.E.R. Update
Comments: To: al chin <hobchi@JUNO.COM>
In-Reply-To:  <19991102.212028.3190.9.hobchi@juno.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 2 Nov 1999, al chin wrote:

> On behalf of all,
> Tank you much Jeff.

Thank you for the kind words Al and the others that have written me. It's
not just me that deserves the thanks. We should thank Mitch for having
the foresight to create the S.U.P.E.R. site and all members of the SUPER
team that have worked diligently to maintain the site. Bill Childers and
I are the two newest members and I freely admit that there's more to
doing a S.U.P.E.R. update than I ever imagined :) It has defiantely been
a learning experience for me and I'm proud to report that the part in
which I do is done entirely on my 200LX, which is a 2X unit. Without the
double speed it would take forever to work on the super.gdb.

I just reupdated the supernew page and it does look much better with some
of the FLUFF removed. If anyone ever has any suggestions, by all mean let
me or any of the other SUPER folks know. I don't mind doing the work. If
I did I never would have volunteered for the job :)

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           - Seek the truth & sound the alarm!  Ezekiel 33:3 -
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 07:05:42 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: CPack vs Transfile (was: CPack Question and others)
Comments: To: lloo@WORLDNET.ATT.NET
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

What is the F in FIR?



-----Original Message-----
From: Longden Loo <lloo@WORLDNET.ATT.NET>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Sonntag, 31. Oktober 1999 14:24
Subject: Re: CPack vs Transfile (was: CPack Question and others)


>Message-Id: <19991031132345.HACF1553@12.72.155.21>
>Date: Sun, 31 Oct 1999 13:23:45 +0000
>
>Great summary Geert!
>
>   >QUESTION: Who is in the position to ask HP to donate CP to
>   >the public domain now?
>
>Maybe Thaddeus? ... or someone with contacts at HP.  With the 200LX leaving
>the scene come November, maybe HP won't consider CP as a profit/liability
>issue anymore.
>
>   >2) Common to TF and CP:
>   >Either LX serial cable or IR interface on PC needed for
>   >communication. Serial-IR adapters probably work (Aegis-IRHP5
>   >OK, did your adapter work, Longden?).
>
>I couldn't find the IR adapter ... could be that I sold it to someone and
>forgot.  I have 2 printer/IR adapters that look the same as the file
>transfer IR and still have to look around.  I've just been using the serial
>cable in the meantime. The increased speed and functionality alone is
>reason to use CP over TF.  I may have chucked the FIR because I kept having
>to switch connection settings between IR/serial when I went from work to
>home, since I had only 1 FIR-port.
>
>   >If you're having trouble with functions in cpack (Filer
>   >wouldn't work for me), try using
>   >ControlPanel/System/Environment to remove extraneous
>   >variables and/or values to gain back environment space, which
>   >cpack appears to need.
>
>I wish I could be more specific on a method for finding out how much
>environment space is used/remains on NT.  Several DOS utilities I've
>downloaded work fine on my Win95 machine, but fail on NT (I tried programs
>CHGENV and WHATS, from Simtel).
>
>In the meantime, CP is a refreshing change from TF's tiresome complaints
>about dropped connections on larger files.
>
>- Longden
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 2 Nov 1999 18:36:37 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: ApptBook: convert ToDo -> Appt?
Comments: To: Ted Heise <theise@NETINS.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Good, but it won't work for recurring events.
-goe-


-----Original Message-----
From: Ted Heise <theise@NETINS.NET>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Montag, 1. November 1999 23:53
Subject: Re: ApptBook: convert ToDo -> Appt?


>On Mon, 1 Nov 1999, Steve Dowell wrote:
>
>> I think probably macro is the way to go.  I've got one set up for fn+f9.
>> Here's what mine looks like:
>> {Enter}{F5}t{Enter}{Appt}{F2}{Paste}{F10}
>>
>> (The "t" positions to a defined smartclip that I have set up)
>
>Unless I'm missing something, this does not also transfer an
>associated Note.  Here's what I came up with for that:
>
>{Enter}{Copy}{F3}{F2}c:\_dat\tmp-note.txt{Enter}{F10}{F10}{F9}
>{F2}{Paste}{F3}{F3}c:\_dat\tmp-note.txt{Enter}{Enter}{F10}{Tab}
>
>Ted
>
>--
>Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 01:26:57 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Keefe <emkeefe@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Keefe <emkeefe@USWEST.NET>
Subject:      Re: S.U.P.E.R. Update
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Thanks, Jeff,

With your permission, I'd like to use your announcement in
the Palmtop Email Newsletter #16.

WRT: to the complaint about some of the AI software--the
commercial stuff probably should be called
"almost-giveaware". This is software that originally cost
$150+, now sold for as little as $15. The URLs to the site
for the commercial ware hopefully will be useful to readers
of the AI article in Sep/Oct issue of The HP Palmtop Paper.
.ed.PTP

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 04:10:59 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              JScheiner@01019FREENET.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Joerg Scheiner <JScheiner@01019FREENET.DE>
Subject:      Flexpad Version 3.0
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi Palmtoppers.

Paul Kramer has released Version 3.0 of Flexpad. It includes a very fast =
Multi File Search and some additional views. You can download it at =
www.jps.net/flexpad/.

The file.jump.to feature can now be used to create links to data in =
another file.

I like it very much. There is also a flexpad mailing list for those who =
want to know more.

Best regards
 Joerg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 10:29:46 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Geert van Wirdum <v.wirdum@HCCNET.NL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Geert van Wirdum <v.wirdum@HCCNET.NL>
Subject:      Re: CPack vs Transfile (was: CPack Question and others)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> What is the F in FIR?

Fast.

FIR is supported by IrDa at 0.576, 1.152 and 4.0 Mbps and requires a
DMA channel.

Depending on the computer, it may be needed to change setup in order to
avoid DMA conflicts. On one W95 laptop I found a way to work
conveniently with it, but when a IR printer was used first, I had to stop
and restart IR before I could use CPack on IR. While not elegant, that
was no serious problem. On another, W98, laptop, I was automatically
lead to install different drivers for the FIR port, which would not let
me use CPack on IR (well, it works with the Aegis IR device on the
serial cable, and it accepts hot inserts of flash cards, so there are
other ways to transfer files). There probably are ways to do these
installations correctly for both IR printing and serial IR
communication with SIR (S for serial, speeds up to 115 Kbps), but I did
not yet go for the repeated setup changes and restarts.

If anyone has neat solutions, I would welcome these very much, though!

Geert.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 05:15:25 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE>
Subject:      Re: Arachne
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thomas wrote:

"Jupp. Have tried it.
It works but not very smooth.
The CGA screen makes all graphics look bad when runing in the
ArachneEGA mode.Interesting but not as usefull as HV with WWW/LX."

Then we skip that program.

Do you use memo to WWW/LX?


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 05:15:31 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill 9 <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE>
Subject:      Re: Memo - long lines
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Martin you wrote:


"Well I have no problem _reading_ the messages with Post/lx. ButI getproble=
ms when I reply with PE.."

and

"Well I do not know how other emailprograms work. I can only
comment onwhat I see. I tried to use Memo but went back to PE because=
 ofthe linelength problem. The line(s) above was on one line (looonnng)"


Don't you contradict yourself?First you said that you had problems with=
 linelength when replying with PE,then you said that you went back to=
 PE as you had the same problem with memo?

you continued:


" The only othersolutionis that you hit Enter when you come to the=
 end of the screen99inMemo..But if its only me that has problems with=
 your messages don't
bother"


I will try to remember pressing enter when sending an email to you which=
 I want an answer on.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 05:15:36 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE>
Subject:      Re: Memo - long lines
Comments: To: S_Carder@COMPUSERVE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Steve Carder wrote:

"You can force Memo to put a carriage return at the end of each
line on the
screen (as defined by your margin settings) by having it print
to a file."

Excuse me for perhaps a stupid question,but what will I do with this=
 file,insert it in an email?


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 05:15:42 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE>
Subject:      Re: Memo - long lines
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Peniel wrote:

"Possibly...  You say "LX users excluded".  My guess is that
most folks
are using Windoze, and their mail software reformats the
messages to
fit the screen.  Post/LX can also be set up to do it."


OK,then we can make some conclusions:

1:Martin got problems with long lines as he uses PE

2:This memo related long line problem is restricted to LX users
  who answers memo-emails.(and who not have memo)


3:If I press enter after every line Martin will get no problems
   when answering my mails


I think I stay with memo,that is to say:one problem less.



Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 06:50:13 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE>
Subject:      Re: Arachne
Comments: To: al chin <hobchi@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Al wrote:

What is the URL?????

Semper mobilis,
yor pal al :-) .............


I think it was www.cnet.com

BTW,what does semper mobilis mean?A latin expression I guess.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 06:50:25 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars =?iso-8859-1?q?Hedstr=94m?= <nxw988e@TNINET.SE>
Subject:      Re: HELP: Halloween Nightmare
Comments: To: fjkaufman@WORLDNET.ATT.NET
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

F.Kaufman wrote:


"You can try a hard reset.  Press all at the same time:
Ctrl-LeftShift-On
and answer no to the the C: drive initialization query."

I press Ctrl+ON+ShiftKey(the gold arrow) when doing a hard reset.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 07:28:09 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: Memo - long lines
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Excuse me for perhaps a stupid question,but what will I do with this
>  file,insert it in an email?

Yes, if the people you send messages to are having problems with the long =
lines
in Memo.  You print to a file, then insert the file into your E-mail =
program.
If you know the name of the temporary file your E-mail program expects =
from the
message editor, then just use that name to save a step.  For example, =
Post/LX
expects the editor to provide a file named post.tma containing your =
message.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 06:42:31 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      Re: ApptBook: convert ToDo -> Appt?
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Stephan Goeldi writes:
> Good, but it won't work for recurring events.

True enough, but how often do you need to convert a recurring ToDo
to a recurring Event?

Ted

--
Theodore Heise     <theise@netins.net>     West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 07:55:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Subject:      Re: LCD flakiness
Comments: To: orn@UPL.CS.WISC.EDU
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Rudy,

I had similar problems with my HPLX 100 unit. I took it apart (there are
directions at hplx.net somewhere) cleaned the connector end of the cable
from the display to
the motherboard with some alcohol, put it back together, and no longer have
the problem. CAVEAT - this is my backup unit and does not get much use, but
I have had no difficulties since then.

Brian

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 13:46:25 +0100
Reply-To:     stephan.goeldi@datacomm.ch
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Word 5.5 Download
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

The URL is:

http://officeupdate.microsoft.com/downloadDetails/Wd55ben.htm

It was a 3 second search on www.google.com with the question:

+word +download +"5.5"

-goe-


------------------------------------------------------
This mail sent through Arpanet: http://www.arpanet.ch/

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 13:59:53 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

This is our present knowledge concerning the stray RF signals
of mobile phones interfering with the palmtops IR port:

-the problem occurs only, if the serial port is set up for IR.

-the problem occurs only, if the IR serial channel is powered.

-the receiving photo diode is not the problem. I soldered it
 out of my palmtop, but the problem still existed.

-the UART cannot be the problem, because otherwise the palmtop
 would also receive stray signals, if setup for wired serial
 channel, which is not the case.

Putting these 4 symptoms together, in our opinion it is very
likely, that some circuit between the receiving photo diode and
the UART (excluding both) acts as a receiver for the stray
signal.

Because wired and IR channel are powered independently, and the
problem only occurs, if IR is powered, the suspicious circuit
must also be connected with the IR power supply.

We still need help from someone with electronic knowledge to
identify the 'receiver' in the palmtop. Helpful would be
information about circuits which could act as receivers and
circuits which cannot act as receivers.

The answer to another question would possibly solve the problem
as well: Why is the HP95LX immune against these stray signals?
It has the same (bottom only) shielding as the HP200LX and is
almost identical to the HP200LX concerning it's IR hardware.

If this too OT for most of you, let's continue this discussion
off list.

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 08:43:14 -0500
Reply-To:     "William T. Hole" <wth@nlm.nih.gov>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "William T. Hole" <wth@NLM.NIH.GOV>
Subject:      Netscape 4.5 imports LX appointments directly
MIME-Version: 1.0
Content-Type: TEXT/plain; charset=us-ascii

My Netscape 4.5 Calendar
  File -> Import
has:

   HP 200LX Palmtop
and

   HP100LX/200LX Appointment Book File

choices with the note 'Agenda and tasks data in an ADB file...'  for
either a a serially connected palmtop or a local file respectively.

The Messenger Address book import does not have an HP import, but does
have 'Text file' import.

As I recall, the Calendar import works fine - I haven't used it much
because I don't really need anything but my 200lx!  It could be
valuable when you need to share your calendar

I believe I had to choose an optional, larger version of Netscape to
get these capabilities.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 14:45:04 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Pierre VIGNACQ <pierre.vignacq@TURBOMECA.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Pierre VIGNACQ <pierre.vignacq@TURBOMECA.FR>
Subject:      Re: We still need help
Comments: To: Stefan.Peichl@T-ONLINE.DE
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Sorry, but I didn't notice this thread before...
What kind of susceptibility did you observed ?
Did you mean that you unconnected the diode from the palmtop (opened
circuit) or that you wired it out of the board ?
Are the drawings and board layout available somewhere for a "paper"
investigation ?... this could be somehow interesting...

Pierre
-----------------------------------------------------
Pierre VIGNACQ

TURBOMECA - Service Electronique / Electronic Section
Email : Pierre.VIGNACQ@turbomeca.fr
Phone : +33 - 5 59 12 55 34
Fax :   +33 - 5 59 12 51 48
-----------------------------------------------------

----- Message d'origine -----
De : Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
=C0 : <HPLX-L@UCONNVM.UCONN.EDU>
Envoy=E9 : mercredi 3 novembre 1999 14:59
Objet : We still need help


| This is our present knowledge concerning the stray RF signals
| of mobile phones interfering with the palmtops IR port:
|
| -the problem occurs only, if the serial port is set up for IR.
|
| -the problem occurs only, if the IR serial channel is powered.
|
| -the receiving photo diode is not the problem. I soldered it
|  out of my palmtop, but the problem still existed.
|
| -the UART cannot be the problem, because otherwise the palmtop
|  would also receive stray signals, if setup for wired serial
|  channel, which is not the case.
|
| Putting these 4 symptoms together, in our opinion it is very
| likely, that some circuit between the receiving photo diode and
| the UART (excluding both) acts as a receiver for the stray
| signal.
|
| Because wired and IR channel are powered independently, and the
| problem only occurs, if IR is powered, the suspicious circuit
| must also be connected with the IR power supply.
|
| We still need help from someone with electronic knowledge to
| identify the 'receiver' in the palmtop. Helpful would be
| information about circuits which could act as receivers and
| circuits which cannot act as receivers.
|
| The answer to another question would possibly solve the problem
| as well: Why is the HP95LX immune against these stray signals?
| It has the same (bottom only) shielding as the HP200LX and is
| almost identical to the HP200LX concerning it's IR hardware.
|
| If this too OT for most of you, let's continue this discussion
| off list.
|
| Stefan
|
| ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
|

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 08:54:20 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Re: HisWord missing verses in John ch. 13-15
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I have HisWord on my palmtop (AV) but John ch. 13 - 15 are not showing up
> (just the verse numbers). Anyone has the same problem?
>
> Donglok Kim

It is in mine.  Reload your data.  I had mine get corrupted a
while back, and entire books were missing.  After I reloaded the
data files, it worked just fine.


Best Regards, Robert Hocking
In Sterling Heights, Michigan
Email Address: hocking@flash.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 07:42:10 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Arachne

Always (on the) moving...

Semper mobilis,
yor pal al :-) .............


___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 08:25:14 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      RIO

To the RIO pgmer: The story I wuz trying to remember wuz:
The Amer coin scandal, Re volks?   Think he got himself blown
away.  Ring a bells?

Semper mobilis,
yor pal al :-) .............

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 15:21:28 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: HELP: Halloween Nightmare
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> F.Kaufman wrote:
>
> "You can try a hard reset.  Press all at the same time:
> Ctrl-LeftShift-On
> and answer no to the the C: drive initialization query."
>
> I press Ctrl+ON+ShiftKey(the gold arrow) when doing a hard reset.


Just to clarify: I believe that only the LEFT gold arrow (left shift
key) can be used in this combination to force a hard reset.  The order
does not matter as you need to hold all three keys down at the same
time.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 15:21:31 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: We still need help
Comments: To: Stefan.Peichl@T-ONLINE.DE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

>
> If this too OT for most of you, let's continue this discussion
> off list.

I find it fascinating, even if I don't know anything about
electronics!!! (G)

And as someone mentioned, you can see why they want to ban certain
electronics on airplanes.

Re: the HP95 IR.  I do know that it had a much further transmitting
range but I don't know why it had a better range or if that might be
part of why it is not bothered by the cell phone signals.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 09:22:09 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "R. Christopher Lott, P.E." <rclott@RO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "R. Christopher Lott, P.E." <rclott@RO.COM>
Subject:      Lanwatch Question
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Is anyone running Lanwatch with an Acton ethernet card?  If so, I would
like some help.  Please e-mail me off-list.

-Chris Lott

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 22:30:58 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "R.S." <rogerswn@CTIMAIL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "R.S." <rogerswn@CTIMAIL.COM>
Subject:      SUPER site
MIME-Version: 1.0
Content-Type: text/plain; charset="big5"
Content-Transfer-Encoding: 7bit

Is it only me?
I am chkg the softwares in SUPER site, but the SUPER file catalog doesn't
work.

Roger S.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 09:26:30 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      Re: We still need help
In-Reply-To:  <m11j00q-002FJ4C@fwd05.btx.dtag.de>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 3 Nov 1999, Stefan Peichl wrote:

> If this too OT for most of you, let's continue this discussion
> off list.


Sounds like you are making progress.  I am interested in this
project and would vote for keeping the discussion on list.

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 10:59:55 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: MS Word....
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

> I haven't been able to get Word to work other than in raw DOS; do I need
> MaxDOS for this?
>
I run Word 5.5 from AppMgr on a 2Mb 200LX.

Go to Setup and make sure your system RAM is set to the maximum 636K. In
AppMgr's "Add an Application", set a vertical bar shift\ at the end of your
Path entry to allow Word the maximum available memory.

Also, I find that I usually have to remove Filer from memory if I want to use
the Speller or Thesaurus. Do this, get CLOSEFLR from S.U.P.E.R.

> Sorry, forgot to include the version-- it's Word for DOS 5.5 .  I have a
> cool (in my opinion) little SysMgr icon for it if anyone's interested.
>
Why not upload it to the S.U.P.E.R. Icon Server at
www.palmtop.net/cgi-bin/supericons ? There are already a bunch of MS icons among
the 700 or so there, including a couple of Word ones.

Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 09:18:41 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      FLUFF RE: RIO
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

No bell. Not surprising though... I've only been with Harrahs for a
little over a year, and only involved with RIO stuff for the past couple
of months.

Cheers,
Steve

        -----Original Message-----
        From:   al chin SMTP:hobchi@JUNO.COM
        Sent:   Wednesday, November 03, 1999 6:25 AM
        To:     HPLX-L@UCONNVM.UConn.Edu
        Subject:        RIO

        To the RIO pgmer: The story I wuz trying to remember wuz:
        The Amer coin scandal, Re volks?   Think he got himself blown
        away.  Ring a bells?

        Semper mobilis,
        yor pal al :-) .............


___________________________________________________________________
        Get the Internet just the way you want it.
        Free software, free e-mail, and free Internet access for a
month!
        Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 11:14:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      IP Registration?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Wed,  3 Nov 1999 11:07:59 -0500 (EST)

Hi folks -

Does anyone know how to register IP with the author (ANTON)?  It's a
cool program, but has some features that won't work in unregistered
copies.  Also it looks like the editor times out and quits working
after 2 weeks of use.  (At least it pops up a message in Japanese, and
any changes typed in don't show up after that).

Any clue what the registration fee is or how to send it to ANTON would
be appreciated.


TIA

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 19:20:15 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Feher Tamas <etomcat@EGON.GYALOGLO.HU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Feher Tamas <etomcat@EGON.GYALOGLO.HU>
Subject:      Re: mobile phone tapping, what about OGO700LX?

Hello Stefan, hello all,

This strange phenomena with 200LX and mobile phones is really
interesting. Someone should test if same happens with a 700LX;
as the OGO700LX was actually designed to operate as standard
with an active, transmitting 2110 biggybacked to its top lid.

I hope HP took proper care to fight RF. Does 100/200/700LX
have an FCC ID# and thus USA RF approval, anyhow?

Thank you, Regards: Tamas Feher.

____________________________________________________________
EGON - az ingyenes levelezorendszer  http://egon.gyaloglo.hu

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 12:40:54 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      Re: mobile phone tapping, what about OGO700LX?
In-Reply-To:  <199911031820.TAA25789@egon.gyaloglo.hu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 3 Nov 1999, Feher Tamas wrote:

> I hope HP took proper care to fight RF. Does 100/200/700LX
> have an FCC ID# and thus USA RF approval, anyhow?

Good question, Feher.  My 200LX says on the bottom:

  FCC ID:B94F1060

It's a 1997 Singapore model.  The manual says it complies with
the limits for a Class B computing device.  Of course this is
wrt emission, not protection *from* other emissions.

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 14:01:55 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: S.U.P.E.R. Update
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<With your permission, I'd like to use your announcement in
the Palmtop Email Newsletter #16.>>

In case anyone isn't aware, Ed Keefe sends out a weekly newsletter with
palmtop tricks, software, and happenings.  You can sign up at
www.palmtoppaper.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 14:26:24 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: S.U.P.E.R. Update
MIME-Version: 1.0
Content-Type: text/plain

Is there a way to get back issues of this?

Steve

        -----Original Message-----
        From:   Hal Goldstein SMTP:hal_goldstein@THADDEUS.COM
        Sent:   Wednesday, November 03, 1999 12:02 PM
        To:     HPLX-L@UCONNVM.UConn.Edu
        Subject:        Re: S.U.P.E.R. Update

        <<With your permission, I'd like to use your announcement in
        the Palmtop Email Newsletter #16.>>

        In case anyone isn't aware, Ed Keefe sends out a weekly
newsletter with
        palmtop tricks, software, and happenings.  You can sign up at
        www.palmtoppaper.com

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 14:11:17 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: S.U.P.E.R. Update
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<1Is there a way to get back issues of this?>>

Ed Keefe is working on a revamp of www.palmtoppaper.com that will include
all back issues of Palmtop Paper, his email newsletters, and fresh material.
Not sure when it will be done.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 12:40:23 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: Netscape 4.5 imports LX appointments directly
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Wed, 3 Nov 1999 08:43:14 -0500, "William T. Hole" <wth@nlm.nih.gov> =
wrote:

> My Netscape 4.5 Calendar
>   File -> Import
> has:
>
>    HP 200LX Palmtop
> and
>
>    HP100LX/200LX Appointment Book File

Hi All,

I must add to William post and per. the Netscape readme.txt.
In order to get the calendar you must download/install the cp32d45.exe or
cp32e45.exe (Netscape Communicator Enterprise 4.50).


HTH

Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 21:46:12 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: We still need help
Comments: To: Pierre VIGNACQ <pierre.vignacq@turbomeca.fr>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Pierre VIGNACQ wrote:

> Did you mean that you unconnected the diode from the palmtop (opened
> circuit) or that you wired it out of the board ?

I soldered the receiving diode out of the palmtop and left
both ends open.

> Are the drawings and board layout available somewhere for a "paper"
> investigation ?... this could be somehow interesting...

the SDK only shows a simple block diagram. Not very helpful in
this case. I don't think that better information is available.

If you look at the mainboard from the memory side, you will see
a U shaped fenced off region. I suspect all IR relevant circuit
inside this region. It includes a 8 leg chip from Texas Ins.

It has written on it:

6T5
345T
372C

any idea, what this is used for?

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 20:47:44 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: S.U.P.E.R. Update (fwd)
Comments: To: Jeff <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Jeff,

> I'm trying.... I really am trying..... I spent three hours messing with
> it last night correcting a lot of errors and have only had about 8 hours
> of sleep over the past couple of days, due to surgery that my wife had.
> I mainly wanted to get the files posted so folks could use them. Once
> again, I'll take responsibility for any and all errors and for the way it
> looks.

don't be angry - I know administrating such a website with many links
and files sent by various people is a big job.

I didn't look at the new SUPER by now, so I don't know if you have
already this information, but if you want to have it for adding, here it is:

LXTeX2e is FREE SOFTWARE (as the whole LaTeX).
The author's (=mine) email address is d.hertrich@gmx.de .

GTX
daniel

P.S.: I'M glad that someone continues to administrating SUPER since
Mitch gave it up (probably due to too much trouble with it). Keep up
the good work!

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 13:02:35 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: S.U.P.E.R. Update (fwd)
In-Reply-To:  <199911032047.UAA06868@linux.zrz.TU-Berlin.DE>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 3 Nov 1999, Daniel Hertrich wrote:

> P.S.: I'M glad that someone continues to administrating SUPER since
> Mitch gave it up (probably due to too much trouble with it). Keep up
> the good work!

Well, he hasn't really given it up.  Just delegated the updates to other
members of the SUPER team.  <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 15:00:58 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: S.U.P.E.R. Update (fwd)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Wed, 3 Nov 1999 20:47:44 GMT, Daniel Hertrich <d.hertrich@GMX.DE> =
wrote:

> P.S.: I'M glad that someone continues to administrating SUPER since
> Mitch gave it up (probably due to too much trouble with it). Keep up
> the good work!

Mitch hasn't given it up, he is VERY much involved.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           - Seek the truth & sound the alarm!  Ezekiel 33:3 -
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 17:35:22 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nicholas Argyros <nargyros@MAIL.NYSED.GOV>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nicholas Argyros <nargyros@MAIL.NYSED.GOV>
Subject:      Re: Fluff:Calling with AT/T from Chicago to Norway $1.6?
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

Martin asked:
A friend of mine was Au Pair in Treamont Lane Valparaiso outside Chicago
this summer. She just got the phonebill for her calls home..can this
be correct?:

40 minutes=3D$64
22 minutes=3D$35.20
49 minutes=3D$78.40
47 minutes=3D$75.20
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
158 minutes for $252,80!

As shocking as it seems, it is possible *IF* most of calls were during USA =
daytime, IF local taxes are considered, IF operator-assisted rates =
applied, IF cell-phone rates applied,  IF there was some other intermediary=
 phone company adding an access charge, or IF the calls were made from =
another phone and charged back to the home (USA) phone.

Any one of these factors could escalate the costs of a simple phone call. =
=20
Another consideration:  the US home family is trying to obtain supplemental=
 "rental" costs for the use of their telephone <g>.
  This is why those pre=3Dpaid international phone cards are attractive =
for their rates (but some have hidden surcharges also).
  ATT offers "one-rate" international service for a fixed fee of $3 per =
month plus $.29 twenty-nine cents per minute, anytime of day, to Norway =
and most of Europe.  Too bad the home family did not have such a service =
on their phone.


Nicholas Argyros
Research & Evaluation Team
NY State Educ Dept
(518) 473-0877

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 16:38:42 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      Fluff: Fun URL
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Hey gang,

I was rummaging around HP's website (actually looking for
defibrillator info) and came across a "Jaunt through the
history of HP."  It asks you to guess what various products
they have made are.  Here is the URL:

  http://www.hp.com/abouthp/features/game1

I had a lot of fun.  Hope you enjoy!

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 18:26:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Fluff:Calling with AT/T from Chicago to Norway $1.6?
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

If you don't sign up for some sort of long distance plan then you'll end
up using what ever the default is and it is usually expensive.  This is
even more true of international long distance I imagine.

It sounds like your friend didn't check the rates before calling.
She could try calling the phone company and see if something could be
done about the high charges.

She got an expensive lesson.

cheers... Russ

> A friend of mine was Au Pair in Treamont Lane Valparaiso outside Chicago
> this summer. She just got the phonebill for her calls home..can this
> be correct?:
> ===================
> 158 minutes for $252,80!
>
> Thats $1.6 per minute

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 00:32:01 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Memo - long lines
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 3 Nov 1999 03:03:43 -0800, Lars =?iso-8859-1?q?Hedstr=94m?=
<nxw988e@TNINET.SE> wrote:

> 3:If I press enter after every line Martin will get no problems
>    when answering my mails

This email did not have any long lines.. :-) So I guess it works

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 00:32:02 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Memo - long lines
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 3 Nov 1999 03:03:47 -0800, Lars =?iso-8859-1?q?Hedstr=94m?=
<nxw988e@TNINET.SE> wrote:

> Martin you wrote:
>

> "Well I have no problem _reading_ the messages with Post/lx. ButI
getproblems when I reply with PE.."

Yes that is true. The line above was very long..

> and
>
> "Well I do not know how other emailprograms work. I can only
> comment onwhat I see. I tried to use Memo but went back to PE because
ofthe linelength problem. The line(s) above was on one line
(looonnng)"
>

> Don't you contradict yourself?First you said that you had problems
with linelength when replying with PE,then you said that you went back
to PE as you had the same problem with memo?

I was wrong when I wrote that. The reason why I did not continue to use
Memo was not the problem with long lines. The reason I did not
continue to use Memo was because the Posth (Postheader program) does
not work with Memo only with PE.

> I will try to remember pressing enter when sending an email to you
>which I want an answer on.

Hmm I get special service thanks :-))

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 18:39:13 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      SkyGlobe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Anybody had strange results running Skyglobe on a palmtop? I've tried 2
doublespeed units and as soon as Skyglobe is started, the c: drive gets
a lot *slower*. Rebooting clears the problem.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 15:53:10 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: SkyGlobe
In-Reply-To:  <199911032339.SAA13006@spdmraaa.compuserve.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 3 Nov 1999, Tony Hutchins wrote:

> Anybody had strange results running Skyglobe on a palmtop? I've tried
> 2 doublespeed units and as soon as Skyglobe is started, the c: drive
> gets a lot *slower*. Rebooting clears the problem.

Haven't noticed that, but I'll try it out and see.  I take it it stays
slower after you exit Skyglobe?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 18:56:24 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      Re: SkyGlobe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Wed,  3 Nov 1999 23:48:34 +0000 (GMT)

05m22s ....>> in the future <<....
On Wed,  3 Nov 1999 15:53:56 -0800 (PST), David Sargeant wrote:

> Haven't noticed that, but I'll try it out and see.  I take it it stays
> slower after you exit Skyglobe?

Yup, incredibly slower - for example a program that normally starts
instantly from the c: drive might take 10 seconds or so!! I just have
to start Skyglobe and exit immediately and the "damage" seems to be
done.

BTW what an amazingly quick reponse!!!!!

I do use TREMM and SC. Oh and I only have an unregistered shareware
version of Skyglobe. The last 2 nights I've been able to see the stars
here in the UK so have been trying Skyglobe.

Regards, Tony

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 18:03:32 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: SkyGlobe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Wed, 3 Nov 1999 18:56:24 -0500, Tony Hutchins <nospam@UNDECIMUS.FREESER=
VE.CO.UK> wrote:

> The last 2 nights I've been able to see the stars
> here in the UK so have been trying Skyglobe.

You haven't seen the stars before the past couple of nights <g>?

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           - Seek the truth & sound the alarm!  Ezekiel 33:3 -
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 19:16:45 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      Re: SkyGlobe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Wed,  3 Nov 1999 16:13:38 -0800 (PST), Jeff Johns wrote:

> You haven't seen the stars before the past couple of nights <g>?

No, I've only been in the UK a year<G>. Actually tonight the clouds
closed the show down at about 10pm as well!!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 18:26:04 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: SkyGlobe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Wed, 3 Nov 1999 19:16:45 -0500, Tony Hutchins <nospam@UNDECIMUS.FREESER=
VE.CO.UK> wrote:

> No, I've only been in the UK a year<G>. Actually tonight the clouds
> closed the show down at about 10pm as well!!

This is a great time of year to do some star gazing. Download either =
Predict
or STS from SUPER and track Mir. It's quite easy to see as it's only =
about
500 miles up, you can even see it in the day sometimes. Also, load up =
keps
for the Iridium constellation and watch the flares, they are pretty cool =
to
see.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           - Seek the truth & sound the alarm!  Ezekiel 33:3 -
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 19:48:48 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: S.U.P.E.R. Update
Comments: To: Hal Goldstein <hal_goldstein@THADDEUS.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> In case anyone isn't aware, Ed Keefe sends out a weekly newsletter with
> palmtop tricks, software, and happenings.  You can sign up at
> www.palmtoppaper.com

I wasn't aware, thanks for the tip!
cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 20:02:00 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Re: SkyGlobe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> No, I've only been in the UK a year<G>. Actually tonight the clouds
> closed the show down at about 10pm as well!!

Clouds in the UK? Surely not! Next thing, you'll be saying
that it rains here! <g>

By the way, have you had many fireworks displays near you
yet? Things are getting very noisy as of late!

 -Mike games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 20:59:53 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Subject:      Re: MS Word....
Comments: To: Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>

Ain,

Thanks for the info - Sometimes I like the International ver. sometimes
NEED it to work w/ NATO folks; but usually will have to go w/ the American
ver.

Thanks again,

--tim

-----Original Message-----
From: Ain Vale mailto:ainv@RAINBOW.BURNSIDE.POWELLS.COM
Sent: Tuesday, November 02, 1999 9:26 PM
<<snipped>>

Go to microsoft.com, then find the downloads page, then go to the office
downloads page.  It's listed under Office 97 downloads.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 22:37:29 -0500
Reply-To:     crshare@banet.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Share <crshare@BANET.NET>
Subject:      Re: SkyGlobe
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I was wondering...
What version of Skyglobe are we talking about?
And is it Y2K compliant?

Chris S.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 22:41:03 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              JIMMY TAN <jimmytan@YHSM.PO.MY>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         JIMMY TAN <jimmytan@YHSM.PO.MY>
Subject:      Re: SkyGlobe

Hey guys,

Can one actually see the MIR station and the Iridium satelites with the naked
eye? Or what power telescope does one need?

Jimmy.

____________________Forward Header_____________________
Subject:    Re: SkyGlobe
Author: HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
 Jeff Johns <jeffj@SCOTT.NET>
Sende
Date:       1999/11/04 9:02 AM


> No, I've only been in the UK a year<G>. Actually tonight the clouds
> closed the show down at about 10pm as well!!

This is a great time of year to do some star gazing. Download either =
Predict
or STS from SUPER and track Mir. It's quite easy to see as it's only =
about
500 miles up, you can even see it in the day sometimes. Also, load up =
keps
for the Iridium constellation and watch the flares, they are pretty cool =
to
see.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           - Seek the truth & sound the alarm!  Ezekiel 33:3 -
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 21:59:43 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: SkyGlobe
Comments: To: JIMMY TAN <jimmytan@YHSM.PO.MY>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Wed, 3 Nov 1999 22:41:03 -0500, JIMMY TAN <jimmytan@YHSM.PO.MY> wrote:

> Can one actually see the MIR station and the Iridium satelites with the =
naked
> eye? Or what power telescope does one need?

You can see them with the naked eye, or in my case with my eyeglasses =
<g>.
There are many satellites that are visible with just your naked eye if =
you
know where and when to look. Mir along with Iridium flashes are commonly
even seen during daylight hours. When the shuttle is orbiting it is also
easy to spot.

Mir has a special place in my heart and it's nice to be able to go =
outside
and look up and see it pass overhead, especially knowing that you have
spoken to someone who was living aboard the space station. I hope the ISS
provides as much enjoyent and educational opportunities.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 01:36:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              lloo@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <lloo@WORLDNET.ATT.NET>
Subject:      Old dog does new tricks

Message-Id: <19991104063643.NEJP6862@12.72.154.112>
Date: Thu, 4 Nov 1999 06:36:43 +0000

Hey remember that old PC Magazine utility called DIRNOTES?

It's a little program that lets you maintain an annotated list of your files
as a DIRxxx.DAT file in the same directory.

I'd been using it infrequently to keep track of seldom used files on the LX
and just found a handier way to do it.

I just modified _DAT\FILER.INI so that .DAT files invoke DIRNOTES within
Filer.  Then when I want to view the directory annotations, I just highlight
the .DAT file and press enter.

Of course, people with .DAT files used for other purposes might have a
problem, and people with 4DOS have their own way of annotating.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 02:50:39 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      Re: SkyGlobe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thu,  4 Nov 1999 07:44:50 +0000 (GMT)

07h50m54s ago ...
On Wed,  3 Nov 1999 15:53:56 -0800 (PST), David Sargeant wrote:

> Haven't noticed that, but I'll try it out and see.  I take it it stays
> slower after you exit Skyglobe?

Ah I just tries TREMM to turn off EMM in that SC session, and *then*
started Skyglobe and it doesn't slow down my c: drive!! Seems to be the
answer for me. I wonder if any other programs cause a problem like
this?

Regards, Tony

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 23:59:48 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, BOCHE@DE.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ulrich Boche <BOCHE@DE.IBM.COM>
Subject:      Re: Off-topic: Top metrication advocates in USA?
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

The US market is big enough to allow incompatibilities with the rest of the
world to survive.
Therefore, you can afford appliances without 120V/240V line voltage switching
and you can
also afford a non-metric system of weights and measures.

If it would be vital for the US industry to sell their products in European
countries, you would
see the metric system in the US faster than the blink of an eye (it is not just
inches vs. cm,
nuts and bolts and most tools are also incompatible). But this is not so, US
companies can
do nicely just concentrating on their home market. Some areas like medicine
where
mistakes with weights and measures can be a question of life and death have
almost totally
converted to the metric system. Some companies like IBM who are manufacturing
and
selling their products all over the world have also converted to metric.

BTW. Look at your plastic Coke bottles. What do you see?

Regards,
Ulrich

Ken Hansen <khansen@NJCC.COM> wrote:

>>I think you may be the only one interested ;)

>>Seriously though, I think the adoption of the Metric system
>>will (probably) never happen, as it is a solution to a problem
>>that doesn't exist...

>>The cost of "metrification" would be tremendous, and the debate
>>falls apart when you ask advocates "Why should we adopt the
>>metric system?"

>>When I was in elementary school (ages 6-12) there was a great
>>concern with teaching us the Metric system (1970 - 1976), but
>>that was the last I heard of it...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 3 Nov 1999 23:35:20 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, BOCHE@DE.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ulrich Boche <BOCHE@DE.IBM.COM>
Subject:      Re: HPLX-L Digest - 30 Oct 1999 to 31 Oct 1999 - Special issue
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Well, this may be so, but old browser versions have a lot of drawbacks - they
don't support
many new features used on a lot of web sites and they are insecure. I'd rather
use a
current version and spend some more work with the address book conversion.

Ulrich Boche

Hans Peter Staber <hpstaber@COMPUSERVE.COM> wrote:

I think Avi mentioned something about a direct synch - something like an
import/export filter for *.adb files in Netscape menu's.

The guess was that the Netscape programmer must have been a palmtopper.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 10:34:51 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: mobile phone tapping, what about OGO700LX?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 3 Nov 1999 10:32:29 -0800, Feher Tamas <etomcat@EGON.GYALOGLO.HU> wrote:

> Hello Stefan, hello all,
>
> This strange phenomena with 200LX and mobile phones is really
> interesting. Someone should test if same happens with a 700LX;
> as the OGO700LX was actually designed to operate as standard
> with an active, transmitting 2110 biggybacked to its top lid.

I can test this. I have a Hp 700lx collecting dust somewhere (somebody
wants to buy it?).

What should I do to test it? I guess I could just run Stefan's Ring
program and connect the Nokia to the lid and make a call.

If the 700lx is shielded good enough it should not ring..right?

But the Hp700 does not need to be shielded does it? It uses the built
in pcmcia card and not the irda..

Comments..

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 11:09:40 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Franklin Eekhout <franklin@ONLINE.NO>
Subject:      Re: mobile phone tapping, what about OGO700LX?

> But the Hp700 does not need to be shielded does it? It uses the built
> in pcmcia card and not the irda..

Yes, but Stefan is interested in if it picks up rfi. On my 200LX my Nokia
1610 phone (I know, it is just temporarly!) will only trigger the ringing
program if it is along the back. Not along the side, and not on top of the
keyboard. I was a little disappointed, I had hoped of a 50 cm radius...

br

Franklin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 12:06:08 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I found another little oddity, concerning the mobile problem,
which might be of general interest (or at least good to know).

The palmtops serial port has *THREE* different power supplies:

GPIO pin  0: 3 volt IR power
GPIO pin  5: wired serial power
GPIO pin 15: 5 volt IR receiver power

If you use BIOS functions to select WIRE connections, pin 5
is driven high and pin 0 and pin 15 are low. If you select IR
connection, pin 5 is low and the other two are high.

If you switch serial power off, all three are low.

But if you select IR mode and then drive pin 15 low, you may
still send through the IR port, but no longer receive.

This knowledge should save a lot of battery power if an
application only needs to send out IR data.

The mobile problem only occurs, if pin 15 is driven high. Hence
it must be a 5 volt circuit connected to this pin, which is
causing the trouble.

I would be glad to know, which of the 208 pins of the Hornet
chip is GPIO pin 15 in order to trace down the circuit.

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 08:28:05 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Wittkamper, John" <jwittkamper@V-ONE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Wittkamper, John" <jwittkamper@V-ONE.COM>
Subject:      Re: Lanwatch Question
Comments: To: "R. Christopher Lott, P.E." <rclott@RO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

Why OFF list? I'd like to know too. ;-)

-----Original Message-----
From: R. Christopher Lott, P.E. mailto:rclott@RO.COM
Sent: Wednesday, November 03, 1999 10:22 AM
To: HPLX-L@UCONNVM.UConn.Edu
Subject: Lanwatch Question


Is anyone running Lanwatch with an Acton ethernet card?  If so, I would
like some help.  Please e-mail me off-list.

-Chris Lott

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 15:15:38 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Mexico Metro Map
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

As the author of LXMAP I have to say, that the Mexico map,
prepared by Juan Carlos, demonstrates LXMAP at it's best.

The map is very readable, updates fast, has nice little icons,
the overview is still useful and the index has several sections.

Juan Carlos just used everything I designed :-)

I'm glad to see a continual increasing number of maps on the
LXMAP page of s.u.p.e.r.

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 09:42:48 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Mexico Metro Map
Comments: To: Stefan.Peichl@T-ONLINE.DE
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Thu, 4 Nov 1999 15:15:38 +0000 Stefan Peichl
<Stefan.Peichl@T-ONLINE.DE> writes:
> As the author of LXMAP I have to say, that the Mexico map,
> prepared by Juan Carlos, demonstrates LXMAP at it's best.

I have been meaning to ask you for an improvement to your program, but
did not because I am not sure it would benefit anyone outside the USA.
Yahoo USA can design any street map in the US that you wish (and some
other countries also, I think).  It would be great if those maps were
directly viewable from your program.  In the old list someone spoke about
a tedious process of conversion, and still it was not quite readable in
your program.   Any hope on this?

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 08:50:57 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Terrence Chun <tchun@UCLA.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Terrence Chun <tchun@UCLA.EDU>
Subject:      swapping flashcards b/w 200lx and WinCE
MIME-Version: 1.0
Content-Type: text/plain

I want to be able to transfer a large file from my 200lx to someone else at
work who has a WinCE machine.  IR doesn't seem to be a good option.  I
don't have connectivity capabilities at work.

Is it possible to just take out my flashcard and plug it into the WinCE
machine and have them copy the file to their machine, then swap the
flashcard back to my LX?

Could this wipe out the flashcard?

Would this damage the directory structure of the flashdisk?

Would this be a viable option for me to backup my LX at work by inserting
my 16meg flashcard into a Jornada 680 and backing the disk to the
workstation?  It would make the Jornada into a big dongle, but I figured
that there had to be *some* use for them.  ;)

Thanks!

-- Terry Chun, MD

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 10:00:03 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Swapping Flash Cards
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

I just want to report that I'm very happy with my recent purchase of
the SCM Microsystems PCMCIA cradle for my desktop computer.  I was
recently spoiled by my laptop computer, which let me easily swap
flash cards with my 200LX with ease.  I was longing for the same
capability with the desktop.  The installation couldn't have been
easier - it is accessible from the front panel, just like a floppy
disk.  You have to have a free 3-1/2 in bay, ora 5-14 in bay (they
provide a cradle for the latter).  Now I can xfer files rapidly,
plus it allows me a faster way to update my REX.

-Chris

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 16:48:45 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Fluff: Birthdays
Comments: To: al chin <hobchi@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> WHAT
> You went to CCNY and still alive to talk about it?
> Are you old, crippled or worse?
> I went to Gugginheim concerts at Louisorn stadium :).


Van Cliburn in the mid to late 60's in all of his and its outdoor
splendor one fine summer night with un-ending encores!

I graduated from Lewisohn Stadium in 1968.  And if you attended concerts
there (before it was torn down) you are no spring chicken either! (G)

As a geography lesson for those interested.  CCNY (City College of New
York) was due north of Columbia University but in the midst of Harlem.
And for a sociology lesson (and possibly a socialist! lesson, too) when
I attended it was virtually free to city residents.  Tuition started at
$12.00 a semester when I started and ended at a whopping $27.00 a
semester when I graduated.  Its reputation has varied since I graduated
as has much of the CUNY (City University of New York).  An interesting
era!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 10:38:06 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: swapping flashcards b/w 200lx and WinCE
In-Reply-To:  <yam7977.2897.23402112@smtp.ben2.ucla.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 4 Nov 1999, Terrence Chun wrote:

> I want to be able to transfer a large file from my 200lx to someone
> else at work who has a WinCE machine.  IR doesn't seem to be a good
> option.  I don't have connectivity capabilities at work. Is it
> possible to just take out my flashcard and plug it into the WinCE
> machine and have them copy the file to their machine, then swap the
> flashcard back to my LX? Could this wipe out the flashcard? Would this
> damage the directory structure of the flashdisk? Would this be a
> viable option for me to backup my LX at work by inserting my 16meg
> flashcard into a Jornada 680 and backing the disk to the workstation?
> It would make the Jornada into a big dongle, but I figured that there
> had to be *some* use for them.  ;)

Yep, it works fine.  I used to copy files between my 200LX and my 320LX
all the time, back when I could get wireless e-mail on the 320LX and had
to copy it over to the 200LX to decrypt PGP messages.  It won't damage the
flashcard at all and is very handy.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 13:37:30 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nicholas Argyros <nargyros@MAIL.NYSED.GOV>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nicholas Argyros <nargyros@MAIL.NYSED.GOV>
Subject:      FS:  books & software
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

I noticed a local bookstore has a boxed "freelance Graphics for DOS" =
available for sale.  Since it was way on the top shelf and they were busy, =
I did not ask to get it down.  If anyone is interested, I will follow-up =
and get price and version info.
My local library is clearing their shelves:  I noticed some books on =
Borland C++ for $1.  If anyone is interested, I will obtain and ship for =
$1 plus cost of shipping.  Can reply off-list.

Nicholas Argyros
Research & Evaluation Team
NY State Educ Dept
(518) 473-0877

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 12:51:32 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: MS Word with Newton keyboard
MIME-version: 1.0

On 1999-11-01 HPLX-L@UCONNVM.UCONN.EDU said:
Ain Vale stated firmly that:
   >By the way, the Newton keyboard is great.  It has worked
   >faultlessly for me so far, and it has an excellent "feel".  Highly
   >recommended if you do a lot of typing on your LX.

How much does a Newton keyboard go far, is it compatible with all the
SysManager programs?


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 12:51:38 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Why 1X speed makes (some) sense.
MIME-version: 1.0

On 1999-11-01 David Sargeant said:

   >Since you could download e-mail a lot faster, load the program
   >faster, read in the message file quicker, do searches and sorts
   >faster, and type replies faster, and not have much reduced battery
   >usage anyway, I'd say the single speed makes little sense for
   >e-mail.  Especially since reduced online time means lower battery
   >usage anyway...

This is quite interesting.  I don't download my email from the
palmtop--rather, I use Nettamer on my desktop to download my email and then
just transfer the mail file to the palmtop.  But the opening of the message
file, searches, and loading of the editor could be much faster.  Now, the
term "doublespeed" seems to imply 2x as fast.  Is that generally true.

TIA,

David Ball
Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 12:51:43 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Diabetes tracking software
MIME-version: 1.0

On 1999-10-31 Tony said:

   >I have a Bayer Glucometer DEX and would appreciate being able to
   >download tests ( up to 100 of them) into your software via the LX's
   >serial port.
   >Also, here in Canada as well as many other places, we use mmol/ml
   >as our glucose units.  Perhaps you can make it a selectable option.
   >The conversion is simply  18mmol/ml = 1mg/dl.
   >In addition to carbohydrates, a place to identify pre or post meal
   >tests, and a place for events such as exercise, illness, etc. to be
   >recorded along with a "comments" area.

Until Daniel finishes his software, there does exist a program that you can
run on the palmtop that does all of this.  It's called The Diabetic Daily
Log, and can be found at http://members.aol.com/kennzo/tddl.htm  It works
great on the palmtop w/the addition of the program CGAHLP which can be found
on the Super Site.  CGAHLP allows you to run color programs in mono mode on
the 200LX's screen.


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 11:05:03 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: CPack vs Transfile (was: CPack Question and others)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 2 Nov 1999 07:24:47 Longden_Loo@CANDLE.COM wrote:

> OTOH, it can be argued that any remaining HP wisdom went out the Windows long
> ago ...

You mean it went out the Windows CE? :)

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 11:04:57 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Arachne
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 2 Nov 1999 10:50:14 Ed Padin <epadin@WAGWEB.COM> wrote,

> I looked at this a while ago. It seemed slow... but it worked. I think that
> it may also work with an ethernet ppp driver. That would probably make it
> the best 'free' alternative to HV.

I tried it too. Slow indeed and I admit I did not set it up to
work actually online, but I suppose it could! I agree with
your assessment that it would be a good alternative to HV.
(BTW, HV itself is freeware, alwaysa was, always will be - it
is the TCP/IP stack that you pay for, specifically WWW.EXE.)

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 11:05:01 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: HPLX-L Digest - 30 Oct 1999 to 31 Oct 1999 - Special issue
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 1 Nov 1999 12:57:05 -0500, hpstaber@COMPUSERVE.COM wrote:

> If Avi Meshar is not reading try getting in touch with him off-list at
>    sponsor@FTEL.NET
>
> He was rather enthusiastic when he found out that Netscape did sync with
> HP200LX (g).

He is now back to reading the list. I used it awhile just for
novelty value with Netscape Pro 4.07 and it was a bit slow,
but nice. I do not know about the regular Netscape version,
but someone posted that Netscape 4.7 works that way.

The stuff that works is ADB. You can import other items, such
as PDB, but only as a CDF (CSV) which is easy enough to create
from PDB files.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 11:04:55 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: A Palmtop-Mobile Experiment
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 1 Nov 1999 16:34:40 -0500, Bruce_Martin@MANULIFE.COM wrote:

> > -What can be done on the palmtop side to solve this problem?
>
> <grin> Well, you write an application to save the inducted data to a buffer,
> where it can be decoded and played back through the palmtop's speaker. Then tell
> the FBI, CIA and NSA that you figured out how to turn a 200LX into a
> Tempest-style snooping device. Then the spooks will order thousands of 200LXs
> from HP, convincing them to put the palmtop back into production!

Excellent! I hope this works out like this. Life can be better
than a movie when the CIA / FBI / NSA is involved - you know
the "intelligence" people :-) ...

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 20:54:05 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              chris@AMLOG.DEMON.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Randle <chris@AMLOG.DEMON.CO.UK>
Subject:      Re: What would you do if this happened to you?
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="__next_part__1295393971__"

--__next_part__1295393971__
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

I started this post, and I definately owe an update.

For those who didn't see or forgot the original, it was about
the "confiscation" and subsequent loss of my wife's sister's
HP48 before boarding an El Al flight.

Typically, having regaled you all with tales of woe and
libelling El Al, the "truth" now filters down to me...

1) It wasn't an El Al flight, it was Czech Airlines, but El Al
were handling the baggage.

2) It was NOT carry on. Little miss moron had put it in her
suitcase. So naturally they made her unpack it all. They also
took her shoes, and she hasn't got those back either!

I always hesistate before putting any electronics in my
suitcase, and with El Al, I hesitate before blowing my nose
;-)  So sorry El Al, you're not the big bad guys I thought you
were - would have been nice if you hadn't lost the thing
though.


> On 31 Oct 1999, Nathalie Bugeaud <tps-seti@WANADOO.FR> wrote:
>
> > > I have carried my Hp200 on El Al quite a few times (as carry on in a "bum
> > > belt") with no problems and no questions asked.
> >
> > did you put the bum-belt(+LX) through x-ray or the magnetic detector
> > door-frame?
> >
> > the latter, i was told, can delete files :(
>
> Data on the LX will not be damaged by either the x-ray or the
> metal detector.
>
> Vic Roberts
>
--__next_part__1295393971__
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit


Chris Randle (chris@amlog.demon.co.uk)



--__next_part__1295393971__--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 16:12:59 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: We still need help
Comments: To: Stefan.Peichl@T-ONLINE.DE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> If this too OT for most of you, let's continue this discussion
> off list.

It seems palmtop-related to me.  I don't have any good ideas, but would =
like to
read along, so please stay on the list.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 15:20:38 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Why 1X speed makes (some) sense.
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 4 Nov 1999 12:51:38 +0600, David Ball <dmb10@SWBELL.NET> wrote:

> Is that generally true.

Yup.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 16:32:13 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rick Kozak <rick@COLLOQUIST.ON.CA>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rick Kozak <rick@COLLOQUIST.ON.CA>
Subject:      FS: unit
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I'm just not using any handhelds any more, so its time for cleaning
house.... so I have:

HP200LX Serial number SG61801239 / Speed Doubled / 8MB upgrade
F1011A adapter
Serial Cable
Greenwich GA945-HP serial to parallel cable including instructions
HP 100LX/200LX Developer's Guide
HP Palmtop Paper Subscriber PowerDisk 1996/97 and 1998
HP EXM TOOLS disk
PAL library v1.6 disk
ACE-Link v1.03 disk and manual
HP Palmtop Paper's CD Infobase
HP200LX User's Guide and Quick Start guide
HP Palmtop Paper 1996 (starting at #3) to 1998 (ending at #3) including
bonus issues

I want to sell this together. I offer it here first, then its off to ebay if
nobody wants it enough :-)

I also have 4 USRobotics 9V battery powered 24/96 Worldport fax/modems. Not
fast, but no power drain. You'll need a 25 pin male to HP connector cable.

I also have an Apex Data Mobile Plus Cellular v.34 modem (33.6Kbps/14.4fax)
that includes a cable for a Nokia 2120 (works with 2160) cellphone. I have
no idea if this will work with the HP200, but it did work in several WinCE
units.



thx for your attention
rick

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 08:39:31 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russell Hemery <rhemery@POWERUP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russell Hemery <rhemery@POWERUP.COM.AU>
Subject:      Using LX as a remote control
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Hello

I seem to recall that the LX can be used as a remote control although LED is
weak.

Can someone point me in the direction of what prog etc? Has anyone used
their LX this way?

Specifically I want to replace 4 remotes with my spare LX if possible.

Cable     GE
TV        AKAI
Video     Sharp
CD        Pioneer
Tuner/amp Pioneer

Is there a way to increase the power of the LED?

Any ideas would be appreciated.

TIA

Russell

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 22:23:02 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: S.U.P.E.R. Update (fwd)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Mitch, Jeff and all,

> > P.S.: I'M glad that someone continues to administrating SUPER since
> > Mitch gave it up (probably due to too much trouble with it). Keep up
> > the good work!
>
> Mitch hasn't given it up, he is VERY much involved.

Oh, sorry, I thought so.

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 22:23:04 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: GPS informations wanted, please!
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

Thanks for all the infos about GPS.
But unfortunately the project died, because for interpreting the
signals that such a GPS device sends, we would need some kind of
microcontroller, and we don't want to use any kind of processor.

:-(

instead of this we now decided to build a AD/DA converter ISA card for a PC.
Raw converting, without filters (maybe switchable filters, but not
compulsory). It will be made for measurement purposes or for emulating
a DSP with the PC.

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 23:24:53 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: Mexico Metro Map
Comments: To: d dv <ddvteach@juno.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> <Stefan.Peichl@T-ONLINE.DE> writes:
> > As the author of LXMAP I have to say, that the Mexico map,
> > prepared by Juan Carlos, demonstrates LXMAP at it's best.
>
> Yahoo USA can design any street map in the US that you wish (and some
> other countries also, I think).  It would be great if those maps were
> directly viewable from your program.  In the old list someone spoke =
about
> a tedious process of conversion, and still it was not quite readable in
> your program.   Any hope on this?

I guess the problem is, that these a color maps. Indeed you can
also use color maps with LXMAP, even true color (16.777.216 colors)
PCX maps, but the performance of LXMAP would go down to useless,
because the colors have to be reduced to black and white and
dithered. That needs a lot of calculation to be done and the
result may not be readable on the palmtops 2-color screen.

Therefore I recommend to use black and white PCX maps, which
perform the best, because no color reduction has to be done,
and the PCX compression decodes very fast.

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 23:38:17 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Fwd: Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi Stefan...

As professionally involved in EMC (Electromagnetic compatibility) and
therefore sensitized to the various field levels and their effects, =
you'll
understand easily that I don't have a cell phone of my own available for
testing ;o)

I'll try to find out what can be this TI circuit reference, hoping it is =
not
a custom made for HP...

My first idea - only an idea -, based on the proximity, is that this =
circuit
can be the amplifier of the IR receiver signal. Don't need a genius for
that...

Assuming the previous, I wouldn't be surprised discovering that we are in
front of the amplifier (itself) susceptibility. There's enough
non-linearities (by design) in this kind of stuff to demodulate any =
signal
that could find the door to come inside it. And we need to keep in mind =
that
the peak value of electric field at a few centimeters around a 900MHz =
cell
phone can reach 80 V/m and more. Such levels can easily induce high =
trouble
in appliances much more robust than our nice machines... After amplitude
demodulation, this field can provide nice high level rectangular signals
around 200 Hz...

SElecting the IR function on the LX will give power supply to this =
circuit
which is paid for providing high amplification to low input signal. =
Wherever
this signal came from... In the contrary, the wired RS232 input only =
deals
with digital signals, which don't have the same need for amplification...
and we don't see any problem...

I'll try to confirm, especially through data availability, but I'm =
already
afraid I'm right...

Sincerely yours,

Pierre.

PS : feel free to send copy of this to the list if you feel it is of
interest.
-----------------------------------------------------
Pierre VIGNACQ

TURBOMECA - Service Electronique / Electronic Section
Email : Pierre.VIGNACQ@turbomeca.fr
Phone : +33 - 5 59 12 55 34
Fax :   +33 - 5 59 12 51 48
-----------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 06:58:24 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Schneider <mikeschn@AMERITECH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Schneider <mikeschn@AMERITECH.NET>
Subject:      Re: Swapping Flash Cards
Comments: To: Chris Lott <rclott@MAIL.HIWAAY.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I have an internal PCMCIA drive on my desktop, and I swap files with my
palmtop all the time... Best investment one can make... BTW, in a previous
message someone asked if they could swap files with a Win CE plamtop. Of
course, we can! That's easy! :-)

Mike...

Chris Lott wrote:

> I just want to report that I'm very happy with my recent purchase of
> the SCM Microsystems PCMCIA cradle for my desktop computer.  I was
> recently spoiled by my laptop computer, which let me easily swap
> flash cards with my 200LX with ease.  I was longing for the same
> capability with the desktop.  The installation couldn't have been
> easier - it is accessible from the front panel, just like a floppy
> disk.  You have to have a free 3-1/2 in bay, ora 5-14 in bay (they
> provide a cradle for the latter).  Now I can xfer files rapidly,
> plus it allows me a faster way to update my REX.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 20:23:12 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Don E. Weatherly" <weather@EXIS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Don E. Weatherly" <weather@EXIS.NET>
Subject:      Re: Swapping Flash Cards
In-Reply-To:  <199911041600.KAA03980@mail.HiWAAY.net>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

At 10:00 AM 11/4/99 -0600, you wrote:
>I just want to report that I'm very happy with my recent purchase of
>the SCM Microsystems PCMCIA cradle for my desktop computer.

Is this PCMCIA cradel an IDE, ISA, or PCI device?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 17:17:07 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Swapping Flash Cards
In-Reply-To:  <3.0.6.32.19991104202312.009df250@mailhub.exis.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 4 Nov 1999, Don E. Weatherly wrote:

> >I just want to report that I'm very happy with my recent purchase of
> >the SCM Microsystems PCMCIA cradle for my desktop computer.
>
> Is this PCMCIA cradel an IDE, ISA, or PCI device?

The only ones I've ever seen are:

1) Genuine PCMCIA controllers which use an ISA card, either connected to
the actual sockets (mounted in a 3.5" drive form factor) via ribbon
cables, or with the sockets built into the back of the card. These provide
PCMCIA sockets just like a laptop or the 200LX's socket, and (assuming
your drivers or operating system supports it) will hot-swap and all that.
Most OSes do support hot-swapping, with NT being the only exception I can
think of.

2) The almost-useless IDE PCMCIA card readers that plug right into an IDE
controller via standard IDE cable. These can't handle anything except ATA
flash cards, and to use those, you have to turn the machine off, insert
the card, turn it back on, auto-detect the "hard drive" or manually enter
the information in the BIOS, and then boot up.

I haven't seen any PCI devices, but I'd sure like to find one.  There are
lots of computers coming out now with no ISA slots at all, and installing
a PCMCIA card reader in one of those isn't going to be possible unless
somebody knows of a PCI version.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 20:12:36 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: Swapping Flash Cards
In-Reply-To:  <Pine.LNX.4.10.9911041707310.27072-100000@hplx.net> from "David
              Sargeant" at Nov 4, 99 05:17:07 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> > >I just want to report that I'm very happy with my recent purchase of
> > >the SCM Microsystems PCMCIA cradle for my desktop computer.
> >
> > Is this PCMCIA cradel an IDE, ISA, or PCI device?

This unit I bought goes in an ISA slot.  Fortunately my desktop had
one ISA slot!  The card itself is actually just a bunch of line
drivers and two connectors - just an ISA bus extender.  All the
smarts are in the card cradle.

Under my Win98 system, autodetect works fine on hard disks and
my REX (which identifies as a SRAM card).  Haven't tried ethernet
or modem cards yet.

-Chris

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 18:41:14 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Why 1X speed makes (some) sense.
In-Reply-To:  <0FKO00G8NSGYGZ@mta3.rcsntx.swbell.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 4 Nov 1999, David Ball wrote:

> Now, the term "doublespeed" seems to imply 2x as fast.  Is that
> generally true.

Yep, the double-speed upgrade makes the palmtop run twice as fast.  It
often seems like more, though; when you go back to a 1x unit, it seems
unbearably slow.  <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 20:48:14 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Grafix

Hi y'all
Surpose y'all know that you can download grafix from the web
by right buttoning the image.  However, LXPix doesn't dspy it.
It gives error msg: UNSUPPORTED SIGNATURE/VERSION.
Can someone explain why the down loaded graphics don't dspy
with the LXPix, or don't y'all have the problem, or y'all know
something I don't.  Hmmmmmmmmmmmmmm...

Semper mobilis,
yor pal al :-) .............

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 22:36:41 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Using LX as a remote control
Comments: To: Russell Hemery <rhemery@POWERUP.COM.AU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I seem to recall that the LX can be used as a remote control although LED is
> weak.
>
> Can someone point me in the direction of what prog etc? Has anyone used
> their LX this way?

Search for REMCOM on Super.  You'll need to be within about 1 meter for
the 200LX's weak IR to be effective.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 00:11:35 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeffrey Veiss <jsv@SIRVEISS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeffrey Veiss <jsv@SIRVEISS.COM>
Subject:      Re: HPLX-L Digest - 3 Nov 1999 to 4 Nov 1999
In-Reply-To:  <199911050501.AAA04821@dizzy.sirveiss.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Hi all!

Just curious, are there any other Vector Marketing Representatives who use
the hp100lx/hp200lx?

If so, I have a program I've written specifically for the palmtop that
allows you to enter part numbers and it will calculate all the lines on
an invoice including CPO and commission.  It also takes into account the
different shipping and payment methods.  Though it's mostly functional,
I still have many things to add to it.

If there is anyone who would be interested in a program like this, please
contact me via e-mail, NOT through the list.

Please contact me if there are any further questions via internet mail at
jsv@sirveiss.com.  Thank you very much!

Jeffrey Veiss (jsv@sirveiss.com)            13 Lynn Court
Network Engineer/System Administrator       Somerville, NJ 08876
Sir Veiss, Inc.                             (908) 431-1318

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 00:14:21 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeffrey Veiss <jsv@SIRVEISS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeffrey Veiss <jsv@SIRVEISS.COM>
Subject:      Re: HPLX-L Digest - 3 Nov 1999 to 4 Nov 1999
In-Reply-To:  <199911050501.AAA04821@dizzy.sirveiss.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Hi all!

Just a little strangeness I noticed.

If you go into the world time database between 12am and 1pm on the day
time changes from daylight savings time to standard time, it continually
changes the time back and forth between DST and ST.

Please contact me if there are any further questions via internet mail at
jsv@sirveiss.com.  Thank you very much!

Jeffrey Veiss (jsv@sirveiss.com)            13 Lynn Court
Network Engineer/System Administrator       Somerville, NJ 08876
Sir Veiss, Inc.                             (908) 431-1318

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 22:26:54 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Subject:      Newton keyboards
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

I stated firmly that:
   >By the way, the Newton keyboard is great.  It has worked
   >faultlessly for me so far, and it has an excellent "feel".  Highly
   >recommended if you do a lot of typing on your LX.

Which prompted David Ball to intelligently ask:
>How much does a Newton keyboard go for, is it compatible with all the
>SysManager programs?

The NTKEY2LX driver, written by our Japanese friend MeW in 1996, allows
the LX to receive all commands from the Newton keyboard.  In other words,
yes, it is gloriously SysManager compliant.

I'm having a patch of trouble getting it to work with Word 5.5 though.
It'll type along nicely (and while I have only a 1x unit, my typing was
never fast anyway), but special characters-- basically anything requiring
the shift key-- cause the unit to lock up.  Lock up like hard reset lock
up.  Wotta pain!  If someone knows which file to tap to allow Word to work
more smoothly with the Newton keyboard driver, please let me know.

My keyboard cost me around $75, plus about another $20 for the little
connector cable which I assembled myself.  I bought the keyboard on Ebay,
but since you're bidding against PalmPilot nuts sometimes the auction
prices get a little high.  You can buy a Newton keyboard pre-modified for
the LX from Shier (and maybe others) but the cost is higher.

Ain Vale

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 23:19:18 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              neill <neill@KEYWAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         neill <neill@KEYWAY.NET>
Subject:      RE  swapping flashcards b/w 200lx and WinCE
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

From:    Terrence Chun <tchun@UCLA.EDU>
Subject: swapping flashcards b/w 200lx and WinCE

I use a 620LX as a "big dongle" sometimes..........mostly with text files, I
don't think it would be OK with, say, Excel transfer..........and there
seems to be good compatibility between the machines and their cards.
I just try these things to see if they work. If they do, kewl. If they
don't, I have learnt a little..........and maybe I need a new piece of
equipment. But hell, I'm buying equipment all the time, anyway, with no real
justification.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 23:27:49 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              neill <neill@KEYWAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         neill <neill@KEYWAY.NET>
Subject:      swapping flashcards b/w 200lx and WinCE
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Oh yeah, nearly forgot.
Before I had CPack, I used to download the DOS program files to the 620LX,
swap the Flash Card to the 200LX, and transfer the said files to the C drive
on the 200LX. Programs then run just fine on the 200LX!!
Another testament to the greatness and versatility of the 620LX......oops,
the 200LX.......naah, lets go with both options.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 14:34:48 +0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rachmat Irfan <irfan@KSEI.CO.ID>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rachmat Irfan <irfan@KSEI.CO.ID>
Subject:      HPUG INA
MIME-Version: 1.0
Content-Type: text/plain

Dear all,

Couple of days ago I received message from mr. Rippin Pen.
He asked me to join HPUG INA, which is I believe that is the
organization of the group of palmtop user in Indonesia.
But after I reply my interest to join this group, He has not give an
answer further more yet (maybe He is very busy).

So, please somebody in this list (who has join the HPUG Ina) can give me
information about how to join this group, contact me off or on list. I
really appreciate it.

I appologize to all members of this list, for bothering your time
because of my searching using this list.

Thank you.

Irfan
Irfan@ksei.co.id
021-52991121
0816-1363068

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 08:31:20 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Diabetes tracking software
Comments: To: David Ball <dmb10@SWBELL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi David,


> Until Daniel finishes his software, there does exist a program that you can
> run on the palmtop that does all of this.  It's called The Diabetic Daily
> Log, and can be found at http://members.aol.com/kennzo/tddl.htm  It works
> great on the palmtop w/the addition of the program CGAHLP which can be found
> on the Super Site.  CGAHLP allows you to run color programs in mono mode on
> the 200LX's screen.
.
HEY? Why didn't you write that before? So I don't have to write such a
software!
I only wanted to write it because there did't seem to be one, so I
wanted to combine that with my project of learning C.

I'll have a look into this software, and if it's useful for all
diabetics of us, I'll not write a new one.

If there are much things that we _want_ to be able to with such a
software, but this one doesn't support it, we'll see what it is and if
I can either add it somehow to the existing software or write an
entirely new program.

If the software you mentioned supports all needed features, I can use
my time for writing a more useful software while lerning C.

(Suggestions? ;-) )

Thanks for letting me know about the software, David!

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 17:34:37 +0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, jimmytan@YEOS.COM.MY
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         jimmytan@YEOS.COM.MY
Subject:      Re: Project Managemet software - information req
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: Quoted-Printable

Nope=2E Nothing's missing=2C you zipped 'em fine=2E Must say it's impre=
ssive=2E It's the
most useable project management software I've ever seen on the palmtop=2E=
 A must
buy!

I found the full version=2C at Mr=2E Palmtop retailing at $99=2E00=2E
Info=2Forders : gc=40mrpalmtop=2Ecom=2E


Thanks for everything=2E

Jimmy=2E
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5FForward Hea=
der=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F
Subject=3A    Re=3A Fwd=3ARe=3A Project Managemet software - informatio=
n request
Author=3A "Maynard Riley=22 <maynard=40interaccess=2Ecom=3E
Priority=3A Normal
Date=3A       1999=2F11=2F02 8=3A04 PM


here's the disk contents=3B let me know if I didn't get it all into the=
 .zip I
sent
=2E

 Volume in drive A is unlabeled      Serial number is 2960=3A16D9
 Directory of  a=3A\*=2E*

config=2Etxt         39  10-25-94  16=3A59
help=2Enet       105811   4-14-95  19=3A16
house=2Enet        4721  12-13-94  13=3A23
mill=2Enet        12563  10-25-94  17=3A48
multi=2Enet        8261  12-13-94  13=3A22
readme=2Epv        3546   4-12-95  11=3A13
vision=2Eexe     302479   4-04-95   2=3A00
       437=2C420 bytes in 7 files and 0 dirs    442=2C368 bytes allocat=
ed
       287=2C744 bytes free



 `~Maynard


=

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 08:04:22 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Michael Hooks <MHooks@GWMAIL.VALENCIA.CC.FL.US>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Michael Hooks <MHooks@GWMAIL.VALENCIA.CC.FL.US>
Subject:      Re: Using LX as a remote control
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII

Would it possible to install the stronger IR from an old 95HP in the
200LX?

>>> Russel Brooks <rlbrooks@POBOX.COM> 11/04/99 10:36PM >>>
> I seem to recall that the LX can be used as a remote control although
LED is
> weak.
>
> Can someone point me in the direction of what prog etc? Has anyone
used
> their LX this way?

Search for REMCOM on Super.  You'll need to be within about 1 meter
for
the 200LX's weak IR to be effective.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 08:38:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: swapping flashcards b/w 200lx and WinCE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Is it possible to just take out my flashcard and plug it into the WinCE
> machine and have them copy the file to their machine, then swap the
> flashcard back to my LX?

I have stuck an ATA flashcard from my HP200LX into a WinCE machine.  The =
WinCE
version 2 machine's pocket Internet Explorer could read the large collecti=
on of
medical reference HTML files I keep on my flashcard.

So, it worked for me without any trouble

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 15:17:22 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: mobile phone tapping, what about OGO700LX?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 4 Nov 1999 02:18:55 -0800, Franklin Eekhout <franklin@ONLINE.NO> wrote:

> > But the Hp700 does not need to be shielded does it? It uses the built
> > in pcmcia card and not the irda..
>
> Yes, but Stefan is interested in if it picks up rfi. On my 200LX my Nokia
> 1610 phone (I know, it is just temporarly!) will only trigger the ringing
> program if it is along the back. Not along the side, and not on top of the
> keyboard. I was a little disappointed, I had hoped of a 50 cm radius...
>
> br
>
> Franklin

I tried the ring program and it rings all over the place. I tried to
move the phone around but it kept ringing up to 20-30cm away. So I
guess the Hp700 is just as bad as the Hp 200 when it comes to rfi..

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 09:27:45 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Questioon about upgrading a 200LX
MIME-version: 1.0

I'm interested in upgrading my 2MB 200LX to doublespeed/8 megs of RAM.
Since I'm having problems with my Internet connection, I can't access
the Thaddeus web site to find out.  Is such an upgrade possible, and
how much is it?

Thanks,

David Ball


Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 09:28:01 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: CPack vs Transfile (was: CPack Question and others)
MIME-version: 1.0

   >Also, for those frustrated with their file transfer situation,
   >you might like to try Kermit, which will run on the LX and just
   >about any thing else you may care to be using. I use it
   >regularly with both the LX and the 48GX
   >`~Maynard

Does Kermit allow for multiple file transfers at the same time?



Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 09:27:50 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      off-topic  Win 2000 question
MIME-version: 1.0

i thought that some of the readers of this list might have the answer
to this question,  I've read articles suggesting that Windows 2000 will
require as much of a hardware upgrade to run effectively as did Windows
95 over 3.1.  Is that true?





Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 07:30:47 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: S.U.P.E.R. Update (fwd)
Comments: To: Daniel Hertrich <d.hertrich@GMX.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>> I'm trying.... I really am trying..... I spent three hours messing with
>> it last night correcting a lot of errors and have only had about 8 hours
>> of sleep over the past couple of days, due to surgery that my wife had.
>> I mainly wanted to get the files posted so folks could use them. Once
>> again, I'll take responsibility for any and all errors and for the way it
>> looks.


Isn't this a question of the interface or database structure you use?
It is a Perl database isn't it?
Do you upload and edit the database with your palmtop?
Perhaps some automation and standards would help you, e.g. when
someone sends you a program, is this always done via mail?
Why not create a web interface for uploads including a form for the
necessary fields like "author", "status" (freeware, shareware, commercial),
"URL", "email" etc. This could then be written in a beta version of the
SUPER DB. If you create all the descriptions on your palmtop, you double
your work, because the end app would be a web interface. The super.gdb
is IMHO only a feature (what would the super.gdb be without the web
version?).

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 10:23:18 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Matthew Sheffield <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Matthew Sheffield <mws722s@MAIL.SMSU.EDU>
Subject:      Re: Grafix
Mime-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: 7bit

LxPic doesn't support progressive (called that because they display some of
the image while loading) JPEG's. I'm not sure if it supports interlaced GIF's
either. What kind of image format are we talking about here?

__ms__

Original Msg
------------
Hi y'all
Surpose y'all know that you can download grafix from the web
by right buttoning the image.  However, LXPix doesn't dspy it.
It gives error msg: UNSUPPORTED SIGNATURE/VERSION.
Can someone explain why the down loaded graphics don't dspy
with the LXPix, or don't y'all have the problem, or y'all know
something I don't.  Hmmmmmmmmmmmmmm...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 16:44:15 -0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Brown, William" <wdlb5359@GLAXOWELLCOME.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Brown, William" <wdlb5359@GLAXOWELLCOME.CO.UK>
Subject:      Re: CPack vs Transfile (was: CPack Question and others)
MIME-Version: 1.0
Content-Type: text/plain

Yes, kermit can do multiple files.  And lots else !

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 16:46:26 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Program for screen capturing of XL
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

what's the program some of you used to generate the LX screen captures
that one can see on SUPER?

I tried several programs (grabber etc.) but I got GIFs (or other
formats) that show the screen as it was if you used the program you
captured on a 'real' PC monitor (e.g. inverted and not stretched to the
LX's screen format). But I want to get GIFs (or whatever) that show the
look of the LX's screen, even when displayed on a desktop PC!

(Hope I could make understandable what I mean! ;-) )

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 16:46:46 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Swapping Flash Cards
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

> The only ones I've ever seen are:
>
> 1) Genuine PCMCIA controllers which use an ISA card, either connected to
> ...

> 2) The almost-useless IDE PCMCIA card readers that plug right into an IDE
> controller via standard IDE cable. These can't handle anything except ATA
> ...

There are also PCMCIA- or CF-card readers (again only for memory cards
- not modems or network cards) for the parallel port (also for USB).
They are pretty cheap and work very reliably!

I have one for CF-cards that plugs into the parallel port (with printer
port passing, so I can connect the printer also!).

I'm able to backup my Sandisk 64MB CF card within approx. 4 minutes
with this device. :-)

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 10:53:51 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Grafix

At least GIF, JPG?
Do you know what can be done to rectify these grafix files
so that they can be viewed?   or a grafix util that can be used
to display these grafix.  They are downloaded by the W95 browser.
They must be viewable with something no?   Conversion utils
also say they are invalid so I can't even convert them.

Semper mobilis,
yor pal al :-) .............

>LxPic doesn't support progressive (called that because they display
>some of the image while loading) JPEG's. I'm not sure if it supports
>interlaced GIF's either. What kind of image format are we talking about
here?
>
>------------
>Hi y'all
>Surpose y'all know that you can download grafix from the web
>by right buttoning the image.  However, LXPix doesn't dspy it.
>It gives error msg: UNSUPPORTED SIGNATURE/VERSION.
>Can someone explain why the down loaded graphics don't dspy
>with the LXPix, or don't y'all have the problem, or y'all know
>something I don't.  Hmmmmmmmmmmmmmm...
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 11:30:50 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Arachne
Comments: To: xchaos@arachne.cz
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I really enjoy using your Web browser and applaud that xChaos software
continues to support people using DOS. I also own a DOS-based handheld
computer (the HP 200LX) made by Hewlett-Packard. There are a number of
people like me who are fiercely loyal to DOS software. Unfortunately
however, Arachne doesn't run too quickly on the HP LX series of computers.
Might it be possible (provided there is enough interest of course) for
xChaos to produce an 'Arachne Lite' version that leaves out some of the less
essential features and run faster on an 8087 processor?

Yours,
Matthew Sheffield

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 11:34:36 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Flash Disks: 100LX vs 200LX
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I own a 100LX and a 200LX and 3 different PC cards and am having a bit of a
quandary when trying to exchange disks between my palmtops and my laptops.

Disk 1 is a PNY 15 Mb card that is manufactured by Hitachi (I think). It
works in my laptops, my 200LX and my 100LX.

Disk 2 is a PNY 8 Mb card that is also manufactured by Hitachi. It works in
my laptops and my 200LX but NOT in my 100LX.

Disk 3 is a Simple Technology 48 Mb card that works in my laptops and my
200LX but NOT in my 100LX.

Does anyone have a clue what's going on here?

__ms__

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 11:35:34 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: Arachne
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

For those of us who use DOS on our desktops or notebooks (or the command
prompt on Win 9x systems), Arachne is a great program. It is almost as good
as Netscape 3, imo. It can do _inline_ JPEG's, GIF's, tables, frames. The
developer, xChaos software is very responsive to users and perhaps if enough
of us e-mailed them, they might help make version better suited to the LX's
requirements. The e-mail address is xchaos@arachne.cz

__ms__

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 11:40:02 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Re: FS: unit
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I also have an Apex Data Mobile Plus Cellular v.34 modem (33.6Kbps/14.4fax)
> that includes a cable for a Nokia 2120 (works with 2160) cellphone. I have
> no idea if this will work with the HP200, but it did work in several WinCE
> units.
>
> thx for your attention
> rick

I use my Mobile Plus everyday in my LX.  Works fine landline &
cell.


Best Regards, Robert Hocking
In Sterling Heights, Michigan
Email Address: hocking@flash.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 09:50:06 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Flash Disks: 100LX vs 200LX
In-Reply-To:  <005901bf27b4$0869a100$283d1b3f@satellite>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 5 Nov 1999, Matthew W. Sheffield wrote:

> I own a 100LX and a 200LX and 3 different PC cards and am having a bit
> of a quandary when trying to exchange disks between my palmtops and my
> laptops. Disk 1 is a PNY 15 Mb card that is manufactured by Hitachi (I
> think). It works in my laptops, my 200LX and my 100LX. Disk 2 is a PNY
> 8 Mb card that is also manufactured by Hitachi. It works in my laptops
> and my 200LX but NOT in my 100LX. Disk 3 is a Simple Technology 48 Mb
> card that works in my laptops and my 200LX but NOT in my 100LX.

The 100LX has problems with some ATA flash cards.  You need to load the
ACECARD3 driver in order to make it work properly.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 11:40:35 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: Grafix
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

So, they display in the Web browser but not in _any_ graphics utils? Can you
view them in the Web browser after you save them?

If not, try resaving them. Maybe the files are corrupted

__ms__

>At least GIF, JPG?
>Do you know what can be done to rectify these grafix files
>so that they can be viewed?   or a grafix util that can be used
>to display these grafix.  They are downloaded by the W95 browser.
>They must be viewable with something no?   Conversion utils
>also say they are invalid so I can't even convert them.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 12:57:04 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: Program for screen capturing of XL
Comments: To: Daniel Hertrich <d.hertrich@GMX.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri,  5 Nov 1999 12:19:35 -0500 (EST)

Hi Daniel -

I think both of these can be fixed with LXPIC.  What you could do is to
use Grabber, use the GR2PCX utility to make a .pcx file, view it in
LXPIC, hit I to invert it and save the result.  Then you can use PICEM
or another utility to convert to .gif   If you're capturing from graphic
mode programs under SysMgr, you can use Capsys and set "Inverse" in the
dialog box.

As for the "squished" images, I think LXPIC can fix that, too.

HTH


Peniel
------------


33m09s ago ...
On Fri,  5 Nov 1999, Daniel Hertrich wrote:

> what's the program some of you used to generate the LX screen captures
> that one can see on SUPER?
>
> I tried several programs (grabber etc.) but I got GIFs (or other
> formats) that show the screen as it was if you used the program you
> captured on a 'real' PC monitor (e.g. inverted and not stretched to the
> LX's screen format). But I want to get GIFs (or whatever) that show the
> look of the LX's screen, even when displayed on a desktop PC!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 13:06:07 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Padin <epadin@WAGWEB.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Padin <epadin@WAGWEB.COM>
Subject:      Re: Arachne

Can it do frames on the LX? I don't think HV will do simultaneous frames.

>-----Original Message-----
>From: Matthew W. Sheffield mailto:mws722s@MAIL.SMSU.EDU
>Sent: Friday, November 05, 1999 12:36 PM
>To: HPLX-L@UCONNVM.UConn.Edu
>Subject: Re: HPLX-L Arachne
>
>
>For those of us who use DOS on our desktops or notebooks (or
>the command
>prompt on Win 9x systems), Arachne is a great program. It is
>almost as good
>as Netscape 3, imo. It can do _inline_ JPEG's, GIF's, tables,
>frames. The
>developer, xChaos software is very responsive to users and
>perhaps if enough
>of us e-mailed them, they might help make version better
>suited to the LX's
>requirements. The e-mail address is xchaos@arachne.cz
>
>__ms__
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 13:06:54 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Nemeth <tnemeth@COMPUSERVE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Nemeth <tnemeth@COMPUSERVE.COM>
Subject:      CP Pack and Fluff/Motorcycle
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=ISO-8859-1

Hi Folks, =

Long time, no post.  Birth of our son Alex in August has made significant=

adjustments in our/my lifestyle.  2 kids =3D no sleep, but no complaints
either!  =


1.  CPPack:  I just can't get it to work.  I've seen all the NT tricks bu=
t
I'm running win98 (CP worked great on my Compaq Aero (original)).  Can
someone send me their techniques please?

2.  Fluff:  Ed, Forgive the comment:   Doug Ruth rides a BMW R100
GS/Paris-Dakar (like me) which is anything but a hog (harley whatsisson).=
 =

Pls no flames from Harley owners, just wanna set the record straight.  Do=
ug
and I traded emails from our palmtops on his "little trip" down to South
America.  FWIW, I think BMW R series (aircooled now obsolete) are akin to=

HP 200's. Everyone says they are old and out of date but none of the new
BMW dual purpose bikes approached the sheer simplicity, guts and
rideability of the venerable R100 GS/PD.  Nice synergy of "like"
technologies (don't ask me to explain how i think that!).

=46rom the Sultanate of Oman,
Tom

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 10:16:51 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: Program for screen capturing of XL
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Fri, 5 Nov 1999 16:46:26 GMT, Daniel Hertrich <d.hertrich@GMX.DE> =
wrote:

> Hi friends,
>
> what's the program some of you used to generate the LX screen captures
> that one can see on SUPER?
>
> I tried several programs (grabber etc.) but I got GIFs (or other
> formats) that show the screen as it was if you used the program you
> captured on a 'real' PC monitor (e.g. inverted and not stretched to the
> LX's screen format). But I want to get GIFs (or whatever) that show the
> look of the LX's screen, even when displayed on a desktop PC!
>
> (Hope I could make understandable what I mean! ;-) )



Hi Daniel & All,

I use CAPSYS on the palmtop, then convert the .pcx file on the desktop =
with
Paintshop Pro 5.0 to a .jpg or .gif.

Name                  Version              Author

caps100.zip           1.00                 Hiroyuki Sekiya

CAPSYS is a tool for capturing a screen in the System Manager and saving =
it as
a file in PCX format. This is not a TSR so it consumes no low RAM. =
Copyrighted
freeware.



HTH
Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 12:26:03 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Re: Questioon about upgrading a 200LX
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I'm interested in upgrading my 2MB 200LX to doublespeed/8 megs of RAM.
> Since I'm having problems with my Internet connection, I can't access
> the Thaddeus web site to find out.  Is such an upgrade possible, and
> how much is it?
>
> Thanks,
>
> David Ball

That is what I did just last Christmas, as a present to myself.
Now if they would just get the backlit project done in time for
this Christmas, I could upgrade my backup, backup machine (#3)
to a backlit, doublespeed, 8 meg, or maybe 64 meg.  Spring of
99 catalog has price of 8 meg doublespeed at $159, and it seems
that is what I paid for mine.  The 8 meg is plenty for me, and
if I went to a larger size I would either have to change my
backup strategy, or buy a larger flash card, because I do a full
volume backup to my flash card every night, and then also once a
week, and my "C" drive only has 2 meg of used space, so my 40
meg flash card has been large enough.  Hope this helps.


Best Regards, Robert Hocking
In Sterling Heights, Michigan
Email Address: hocking@flash.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 10:46:20 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: CP Pack and Fluff/Motorcycle
Comments: To: Tom Nemeth <tnemeth@COMPUSERVE.COM>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Hi Tom, and congrats on the birth of your son.

In regards to CPack, what kind of problem are you having?

I DOS copied the Cpack directory from my desktop to my notebook, and app200.bat
just ran fine (ie, without running the install program).

My NT problems recently seemed to indicate Cpack may make use of DOS enironment
space, the lack of which may result in disabling some of the apps.

If you want to test this out, try making a backup copy of your autoexec.bat and
then removing or commenting out some of the "SET" statements in the autoexec.
this should free up some environment space.  Program chgenv.zip on the Simtel
site can display your environment contents and show the amount of bytes
remaining.

I'm not sure if these issues are relevant for Win98 or not.

- Longden





Tom Nemeth <tnemeth@COMPUSERVE.COM> on 11/05/99 10:06:54 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Tom Nemeth <tnemeth@COMPUSERVE.COM>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  CP Pack and Fluff/Motorcycle




Hi Folks,
Long time, no post.  Birth of our son Alex in August has made significant
adjustments in our/my lifestyle.  2 kids = no sleep, but no complaints
either!

1.  CPPack:  I just can't get it to work.  I've seen all the NT tricks but
I'm running win98 (CP worked great on my Compaq Aero (original)).  Can
someone send me their techniques please?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 4 Nov 1999 21:00:50 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paul <pmooney@ONYX.OCTACON.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paul <pmooney@ONYX.OCTACON.CO.UK>
Subject:      Re: Off-topic: Top metrication advocates in USA?
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Didn't this lack of consistencvy cause problems with the spacecraft to
Mars?

Paul
>
> Date:    Tue, 2 Nov 1999 17:43:29 -0500
> From:    Russel Brooks <rlbrooks@POBOX.COM>
> Subject: Re: Off-topic: Top metrication advocates in USA?
>
> > I've been trying to learn more about how conversion to
> > the SI (metric) system in USA is going or idling.
>
> It isn't going at all.  It's amazing how backward we can be.  :-(
>
> Individual groups/organizations/companies are free to go metric, and
> some have, but there is no national drive to complete the move.
>
> Russ
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 14:18:06 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: Arachne
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I don't have Arachne on my LX at present, but on my desktop, it can display
frames.

__ms__

>Can it do frames on the LX? I don't think HV will do simultaneous frames.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 14:58:58 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Fw: Arachne
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I received the following message from the author of Arachne regarding an
LX-specific version of his program:


-----Original Message-----
From: Michael Polak <xchaos@arachne.cz>
To: Matthew W. Sheffield <mws722s@mail.smsu.edu>
Date: Friday, November 05, 1999 2:23 PM
Subject: Re: Arachne


>Dne Fri, 5 Nov 1999 11:30:50 -0600, Matthew W. Sheffield napsal:
>
>> I really enjoy using your Web browser and applaud that xChaos software
>> continues to support people using DOS. I also own a DOS-based handheld
>> computer (the HP 200LX) made by Hewlett-Packard. There are a number of
>> people like me who are fiercely loyal to DOS software. Unfortunately
>> however, Arachne doesn't run too quickly on the HP LX series of
computers.
>> Might it be possible (provided there is enough interest of course) for
>> xChaos to produce an 'Arachne Lite' version that leaves out some of the
less
>> essential features and run faster on an 8087 processor?
>
>Yes, I am planning this, I was given one HP 1000 CX with 1 MB RAM and
>2 MB flash cards while my visit to USA by one HP fan, so I would like
>to release some minimized version with better CGA support also for
>myself ;-) Better CGA support should be in 1.60 beta. Special minimized
>executable few days later. For now, try to se your TEMP variable to
>RAMdisk - not flash card. Or run only from RAMdisk... Also many files
>and icons can be deleted, and I suggest you to switch to mode with
>small icons (F5), set the smallest font size, etc.
>
>Thanks for announcing Arachne in your list. Please announce also the
>optimized version, when it is out ;-)
>
>I really like HP palmtop design, the keyboard is much better than many
>larger nnotebook keyboards... I didn't know HP when I started Arachne,
>but I want to support this platform in future. Please point me to some
>more information, eg. about the "greyscale" CGA mode I have heard about,
>how to detect HP hardware (I got "This program requires HP LX palmtop
>tu run" message from some games started on normal PC ;-) etc...
>
>And I was thinking, that if I can contact manufacturer, which would
>combine HP-LX technology with let's say GSM wireless technology, and
>also add special chip for playing MP3 files (it is quite cheap), it
>can be interesting personal digital assistent ;-)
>
>--
>Michael Polak, xChaos software
>mailto:xchaos@arachne.cz
>mailto:michael.polak@sms.paegas.cz (mobile phone - up to 160 characters)
>http://home.arachne.cz/ (WWW browser for DOS)
>http://webspace.n.cz/ (web hosting "www.firma.cz"/"firma.n.cz")

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 15:19:09 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord
In-Reply-To:  <Pine.SUN.3.96.991102141752.14031K-100000@rise.ee.washington.edu>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Just a quick announcement...since I got my DS 32mb unit, I've copied the source
code to HisWord back onto the palmtop.  Having the source with me always means
that I'll finally be getting back to work on HisWord.  My plans are to
implement the "advanced" search feature, etc, into version 1.3.  I don't currently have a
timeline for completion, but I'll notify everyone on the beta test list when it's
ready to test.

Enjoy studying His Word with HisWord!

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 17:14:56 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: HisWord
Comments: To: Tom Hoover <lists+hplx@HISWORD.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri,  5 Nov 1999 17:04:20 -0500 (EST)

45m11s ago ...
On Fri,  5 Nov 1999, Tom Hoover wrote:

> My plans are to implement the "advanced" search feature, etc, into
> version 1.3.

Excellent news!  Search for phrase instead of just a single word would
be wonderful.

Thanks, Tom


Regards,

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 17:14:58 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Good news (twice)!
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri,  5 Nov 1999 17:09:51 -0500 (EST)

Hi Gang -

This seems to be a day for a little good news.  The upcoming versions
of Arachne and HisWord should be terrific additions to the LX software
arsenal  8-)   Pretty good for an "obsolete" computer...


Later

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 17:26:57 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      How quickly they forget...
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Check out: <http://www.jp.ibm.com/esbu/E/wpc/index.html>.

It's an announcement of an IBM Japan prototype wearable PC. Looks pretty cool,
but IBM spoils it at the last moment with the final line:

"The total weight of the wearable PC, including main unit, controller, headset,
and connector cables, will be 449 g, making it by far the most lightweight
personal computer ever."

I guess all those 312 gram HP 95LXs, 100Xs, 200LXs and 1000CXs don't count, huh?

Bruce, Slightly Pissed Off in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 14:41:47 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Storage Options
Comments: To: rtapp@uvic.ca, PC110@the-gadgeteer.com

Do these Calluna 240 MB type II drives work on the 110, HP LX?
BTW a 1 GB (type III) drive only cost $100 more.

Semper mobilis,
yor pal al :-) .............

>> I noticed today that Mobile Planet is advertising the Calluna Type
>II 260MB Harddrive. It was priced at $299. This was the same one that
>Synchrotech could not seem to deliver. I am fooling around with Linux
on my 110 currently.

>They're at http://d-store.com/d-store/microtech/ibm_micro_drives.htm.
Do the micro drives work on the 110 and/or HP LX?
>
>al...............................
>
>
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 16:59:56 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord
Comments: To: Peniel Romanelli <peniel@WEB2000.NET>
In-Reply-To:  <199911052214.RAA14821@moon.web2000.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Fri, Nov 05, 1999 at 05:14:56PM -0500, Peniel Romanelli wrote:
> > My plans are to implement the "advanced" search feature, etc, into
> > version 1.3.
>
> Excellent news!  Search for phrase instead of just a single word would
> be wonderful.

I plan to add "and", "or", and "phrase" search capabilities.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 15:37:56 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: HisWord
In-Reply-To:  <199911052214.RAA14821@moon.web2000.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 5 Nov 1999, Peniel Romanelli wrote:

> Excellent news!  Search for phrase instead of just a single word would
> be wonderful.

As would the ability to add notes.  And I forget ... do bookmarks work in
the current version?  If so, and the other features get implemented in
HisWord, and if the OLB file format can be used for other information too,
it might make a good general-purpose reference book application for the
200LX.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 18:29:55 +0200
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: Grafix
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Al,

> Surpose y'all know that you can download grafix from the web
> by right buttoning the image.  However, LXPix doesn't dspy it.
> It gives error msg: UNSUPPORTED SIGNATURE/VERSION.

Could you provide the address please where I can download grafix.

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 17:36:58 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: HisWord
In-Reply-To:  <19991105151909.G13560@hisword.net> from "Tom Hoover" at Nov 5,
              99 03:19:09 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> Enjoy studying His Word with HisWord!

Tom:

Is there a FAQ somewhere that explains the installation of the basic
OLB system that is required before I can use HisWord?  I purchased
a complete set of material from Mr. Linder last year.  I had a rough
time getting all the various translations and study guides installed,
and basically just gave up.  Mr. Linder's secretary said he would be
glad to help me over the phone, but he was never there when I called.
So it just sits on the shelf right now.  I would *love* to dust it
off and learn how to install it and get it/HisWord running.  Seems
like one of the difficult things had to do with making a stand-alone
installation that didn't require a CD-ROM or floppy disk every time
you started the program.  I was assured it was possible, but the
instructions were so difficult they couldn't be written down and only
resided in Mr. Linder's head.  Any guidance you could provide would
be greatly appreciated... I'll even pay for my copy of HisWord if
necessary.

Thanks,

-Chris Lott

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 18:40:10 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Using LX as a remote control
Comments: To: Michael Hooks <MHooks@GWMAIL.VALENCIA.CC.FL.US>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Try it and let us know how it works!  :-)

Actually, without knowing anything about the IR hardware, I would guess
that an LED swap by itself probably won't help.  I would think the
circuitry that drives the IR is also responcible for its strength.

cheers... Russ

> Would it possible to install the stronger IR from an old 95HP in the
> 200LX?
>
> >>> Russel Brooks <rlbrooks@POBOX.COM> 11/04/99 10:36PM >>>
> > I seem to recall that the LX can be used as a remote control although
> LED is
> > weak.

> Search for REMCOM on Super.  You'll need to be within about 1 meter
> for
> the 200LX's weak IR to be effective.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 18:40:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Off-topic: Top metrication advocates in USA?
Comments: To: Paul <pmooney@ONYX.OCTACON.CO.UK>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Didn't this lack of consistencvy cause problems with the spacecraft to
> Mars?

Yes, that's what the news was reporting; NASA and its contractor weren't
in synch.  One used metric and the other the old inch/foot/mile system.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 18:40:22 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Icons, how?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

I've just added an app to sysmgr; I'm calling SOPEN.EXE and pointing it
at the SUPER.GDB database so I can search S.U.P.E.R. on my 200LX.

It opens the database as expected but I don't know how to take advantage
of the Super.ICN so it gets shown in the appmgr.

I've tried putting it in the bin directory and renaming it SOPEN.ICN and
also putting it in the directory with the GDB file but all I see are the
default icon selections.

What am I doing room?

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 23:49:06 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Grafix
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> >At least GIF, JPG?
> >They must be viewable with something no?   Conversion utils
> >also say they are invalid so I can't even convert them.

From what site's did you capture these graphics?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 19:25:31 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: Icons, how?
Comments: To: Russel Brooks <rlbrooks@POBOX.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri,  5 Nov 1999 19:20:35 -0500 (EST)

40m23s ago ...
On Fri,  5 Nov 1999, Russel Brooks wrote:

> I've just added an app to sysmgr; I'm calling SOPEN.EXE and pointing it
> at the SUPER.GDB database so I can search S.U.P.E.R. on my 200LX.
>
> It opens the database as expected but I don't know how to take advantage
> of the Super.ICN so it gets shown in the appmgr.

Hi Russ -

Try temporarily putting the path to the icon in the "Add Application"
screen's path line.  Tab to the icon selection box, and it should
appear.  Go back to the path line, and put in the real path, then hit
"OK".   Should do what you want.

HTH


Regards,

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 18:57:05 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord
Comments: To: David Sargeant <david@HPLX.NET>
In-Reply-To:  <Pine.LNX.4.10.9911051427150.12777-100000@hplx.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Adding/editing notes, topics, and definitions has worked since v1.2 (I just checked).
v1.21 just fixed one bug, and v1.22 added the ability to select the initial Bible "version"
(when using a multiple-version datafile like Scholar) and the initial view "font" size.

Bookmarks have worked since v1.0.

> As would the ability to add notes.  And I forget ... do bookmarks work in
> the current version?  If so, and the other features get implemented in
> HisWord, and if the OLB file format can be used for other information too,
> it might make a good general-purpose reference book application for the
> 200LX.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 19:13:19 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord
Comments: To: Chris Lott <rclott@MAIL.HIWAAY.NET>
In-Reply-To:  <199911052336.RAA25244@mail.HiWAAY.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

> Is there a FAQ somewhere that explains the installation of the basic
> OLB system that is required before I can use HisWord?

I haven't looked at the docs or FAQ in a while, but the info _should_ be there.
In a nutshell:

1. Install OLB "normally" which will extract the needed data files.
2. Copy the appropriate datafile directory (e.g. AV, Scholar), and included
datafiles onto your palmtop.
3. Run HisWord the first time using the following command line:

     a:\hisword\hisword.exe a:\hisword\av

to tell HisWord which datafile to use and its location.  Alternately, you can
create your own c:\_dat\hisword.cfg file to tell HisWord where to find its
files.  Here's a sample hisword.cfg:

---cut here---
User
Path=a:\hisword\av
---cut here---

This is only a minimal .cfg file to get you started...the docs/FAQ will describe
additional options.

I used to have a zip file around here somewhere that had an "installed" AV and
Scholar.  I'll have to dig it up and put it on my web site.

BTW- (this is to anyone reading), I've been meaning to setup a mailing list for
HisWord support.  This would serve the added benefit of allowing other users to
help with installation questions and leave me more time for coding new
features.  What mailing list software does anyone recommend for Linux?  Do
users of HisWord think that it would be beneficial to move discussions to a
dedicated mailing list, or to leave them here?

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 02:13:49 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Improved RING.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I added an EMC (electromagnetic compatibility) test mode to my
RING program. Just call RING/T and the EM interference should
be audible like if you hold your mobile close to a radio.

Dowmload from

http://peichl.hplx.net/ring.zip

This new version should enable you to test various shield
solutions for the palmtop and/or mobile phone.

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 09:41:02 +0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, jimmytan@YEOS.COM.MY
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         jimmytan@YEOS.COM.MY
Subject:      Fwd:Re: Using LX as a remote control
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

According some HP engineers originally in the LX team, improvements were made to
the circuitry of the 100/200LX with the aim of reducing the power consumption.
The 95LX ran on something like 5 Volts while the 100/200LX were reduced to 3
Volts. This could be one of the reasons for the drastic reduction in their IR
range. This was documented in the 1998 CD Infobase.

Jimmy.

____________________Forward Header_____________________
Subject:    Re: Using LX as a remote control
Author: HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
 Russel Brooks <rlbrooks@POBOX.COM>
Date:       1999/11/06 8:18 AM
Try it and let us know how it
 works!  :-)

Actually, without knowing anything about the IR hardware, I would guess
that an LED swap by itself probably won't help.  I would think the
circuitry that drives the IR is also responcible for its strength.

cheers... Russ

> Would it possible to install the stronger IR from an old 95HP in the
> 200LX?
>
> >>> Russel Brooks <rlbrooks@POBOX.COM> 11/04/99 10:36PM >>>
> > I seem to recall that the LX can be used as a remote control although
> LED is
> > weak.

> Search for REMCOM on Super.  You'll need to be within about 1 meter
> for
> the 200LX's weak IR to be effective.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 19:57:50 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Diabetes tracking software
MIME-version: 1.0

On 1999-11-05 Daniel said:

   >HEY? Why didn't you write that before? So I don't have to write
   >such a software!
   >I only wanted to write it because there did't seem to be one, so I
   >wanted to combine that with my project of learning C.

Well, I did post about this software to the list a couple of months ago.  As
to your specific message, I didn't reply sooner due to a "little" thing like
hernia surgery this week.  I don't know if The Diabetic Daily Log meets all
of your needs.  It meets all of mine, and then some.  I use it on a daily
basis to track my blood glucose, medications, and diet.

   >Thanks for letting me know about the software, David!

Sure.  Any questions you have about it, let me know.  It's pretty
self-explanatory, though.


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 19:57:55 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: FS: unit
Comments: cc: rick@COLLOQUIST.ON.CA
MIME-version: 1.0

On 1999-11-04 Rick said:
   >I'm just not using any handhelds any more, so its time for cleaning
   >house.... so I have:
   >HP200LX Serial number SG61801239 / Speed Doubled / 8MB upgrade

How much for the entire collection of items, excluding the modems?


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 19:58:01 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Newton keyboards
MIME-version: 1.0

On 1999-11-04 Ain Vale said:
   >The NTKEY2LX driver, written by our Japanese friend MeW in 1996,
   >allows the LX to receive all commands from the Newton keyboard.  In
   >other words, yes, it is gloriously SysManager compliant.

Excellent.  Thanks for this information.

   >I'm having a patch of trouble getting it to work with Word 5.5
   >though. It'll type along nicely (and while I have only a 1x unit,
   >my typing was never fast anyway), but special characters--
   >basically anything requiring the shift key-- cause the unit to lock
   >up.  Lock up like hard reset lock up.  Wotta pain!  If someone
   >knows which file to tap to allow Word to work more smoothly with
   >the Newton keyboard driver, please let me know.

Have you used the keyboard effectively with PE, my editor of choice on the
200LX?  Since PE is designed to be SysManager compliant, I guess I can
assume that the Newton keyboard w/driver would work effectively with it as
well.

   >My keyboard cost me around $75, plus about another $20 for the
   >little connector cable which I assembled myself.  I bought the
   >keyboard on Ebay, but since you're bidding against PalmPilot nuts
   >sometimes the auction prices get a little high.  You can buy a
   >Newton keyboard pre-modified for the LX from Shier (and maybe
   >others) but the cost is higher.

I will check out the price on Shier, then.  The ease of getting it
premodified would outweigh what I might save on Ebay, I should think.
Thanks again for this most informative post.


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 19:58:06 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Swapping Flash Cards
MIME-version: 1.0

On 1999-11-05 Chris Lott said:

   >> I just want to report that I'm very happy with my recent purchase
   >>of  the SCM Microsystems PCMCIA cradle for my desktop computer.  I
   >>was  recently spoiled by my laptop computer, which let me easily
   >>swap  flash cards with my 200LX with ease.  I was longing for the
   >>same  capability with the desktop.  The installation couldn't have
   >>been  easier - it is accessible from the front panel, just like a
   >>floppy  disk.  You have to have a free 3-1/2 in bay, ora 5-14 in


And how much was this purchase, pray tell?




Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 18:01:30 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden Loo <LLoo@WORLDNET.ATT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <LLoo@WORLDNET.ATT.NET>
Subject:      Re: Off-topic: Top metrication advocates in USA?
Comments: To: Russel Brooks <rlbrooks@POBOX.COM>

Actually, the metric issue was just a smokescreen to conceal the fact that
Americans just like things that to go BOOM!


----------
> From: Russel Brooks <rlbrooks@POBOX.COM>
> To: HPLX-L@UCONNVM.UConn.Edu
> Subject: Re: Off-topic: Top metrication advocates in USA?
> Date: Friday, November 05, 1999 3:40 PM
>
> > Didn't this lack of consistencvy cause problems with the spacecraft to
> > Mars?
>
> Yes, that's what the news was reporting; NASA and its contractor weren't
> in synch.  One used metric and the other the old inch/foot/mile system.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 18:06:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden Loo <LLoo@WORLDNET.ATT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <LLoo@WORLDNET.ATT.NET>
Subject:      Re: Icons, how?
Comments: To: Russel Brooks <rlbrooks@POBOX.COM>

Russell,

On your "Add an Application" screen:

- go to the Path field and enter the drive:path:filename of the icon
- jump to the Icon field and it should appear
- now jump back to the Path field and erase what you had, and replace with
the correct path/filename of the exe
- save

- Longden

----------
> From: Russel Brooks <rlbrooks@POBOX.COM>
> To: HPLX-L@UCONNVM.UConn.Edu
> Subject: Icons, how?
> Date: Friday, November 05, 1999 3:40 PM
>
> I've just added an app to sysmgr; I'm calling SOPEN.EXE and pointing it
> at the SUPER.GDB database so I can search S.U.P.E.R. on my 200LX.
>
> It opens the database as expected but I don't know how to take advantage
> of the Super.ICN so it gets shown in the appmgr.
>
> I've tried putting it in the bin directory and renaming it SOPEN.ICN and
> also putting it in the directory with the GDB file but all I see are the
> default icon selections.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 21:08:25 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Fwd: HPLX-L Form Response
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

--- begin of forwarded message ---

Date: Fri, 5 Nov 1999 11:52:02 -0500
From: heijst@vgvh.nl (s25)


Subscriber Comments: Do you have software for mij siemens S25  mobile.
I would like to send information bij the infrared port.

Thanks

Gijs van Heijst
Heijst@vgvh.nl
Rotterdam The Neterlands.


--- end of forwarded message ---
*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 18:07:56 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Grafix

A multitude of sites at random.

Semper mobilis,
yor pal al :-) .............

>> >At least GIF, JPG?
>> >They must be viewable with something no?   Conversion utils
>> >also say they are invalid so I can't even convert them.
>
>>From what site's did you capture these graphics?
>


___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 18:05:32 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Grafix

grafix are any images anywhere on the web.  It is not a specific pgm.
Put your cursor on any image and right click and a box will appear
and you can chooze to save it.

Semper mobilis,
yor pal al :-) .............

>Al,

>Could you provide the address please where I can download grafix.
>Regards
>Helmuth
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 21:46:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Icons, how?
Comments: To: Peniel Romanelli <peniel@WEB2000.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> > I've just added an app to sysmgr; I'm calling SOPEN.EXE and pointing it
> > at the SUPER.GDB database so I can search S.U.P.E.R. on my 200LX.
> >
> > It opens the database as expected but I don't know how to take advantage
> > of the Super.ICN so it gets shown in the appmgr.
>
> Try temporarily putting the path to the icon in the "Add Application"
> screen's path line.  Tab to the icon selection box, and it should
> appear.  Go back to the path line, and put in the real path, then hit
> "OK".   Should do what you want.

Peniel-
I think I tried what you suggested but I don't see the icon in the
appmgr.  I DO see the icon in the datacard when the db is open though.
Are there 2 kinds of icons?  1 for use in appmgr and another for use
when the db is open?  Can 1 icon serve both purposes?

Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 19:16:30 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steven Lawson <stevel@SDL.CONTINET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steven Lawson <stevel@SDL.CONTINET.COM>
Subject:      Re: Arachne
In-Reply-To:  <19991106011509.7665A962A@mcp.sdl.continet.com> from Automatic
              digest processor at "Nov 5, 99 08:13:38 pm"
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> >Yes, I am planning this, I was given one HP 1000 CX with 1 MB RAM and
> >2 MB flash cards while my visit to USA by one HP fan, so I would like

That would be me...  I'm currently debugging Arachne 1.60alfa with the new
version of WATTCP to find some occasional problems when downloading
images.  I haven't tried it on the LX yet, way too busy getting it 100% on
my laptop first.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 22:39:46 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      Re: Using LX as a remote control
In-Reply-To:  <1270370925-4134288@talent.com.au>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> -----Original Message-----
>
> Hello
>
> I seem to recall that the LX can be used as a remote control
> although LED is
> weak.
>
> Is there a way to increase the power of the LED?
>

Well, Radio Shack has a "High Output" IR LED. It's around here somewhere, I
can find it and look for the Part #. I haven't had opportunity to put it in
yet. I have had the case open on muy unit to do a double speed upgrade, and
the LED looks like it would be easy to replace. Maybe I'll do it soon.

Does anyone know ahead of ime if this LED would work better, even though
there it would be driven by the same circuit?

Darren.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 22:39:48 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      Re: Grafix
In-Reply-To:  <19991104.204832.3198.6.hobchi@juno.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>
> Hi y'all
> Surpose y'all know that you can download grafix from the web
> by right buttoning the image.  However, LXPix doesn't dspy it.
> It gives error msg: UNSUPPORTED SIGNATURE/VERSION.
> Can someone explain why the down loaded graphics don't dspy
> with the LXPix, or don't y'all have the problem, or y'all know
> something I don't.  Hmmmmmmmmmmmmmm...


Al, pal, Look close at the filename that HV wants to save the file as. I
recall that someimes it puts .htm as the exension by default, instead of the
correct extension. Usually we're dealing with .JPG's nowadays. If I'm right,
just change the filename or rename it after saving. Lxpic should then
display it correctly.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 22:39:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      Re: HisWord
In-Reply-To:  <Pine.LNX.4.10.9911051427150.12777-100000@hplx.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> be wonderful.
>
> As would the ability to add notes.  And I forget ... do bookmarks work in
> the current version?  If so, and the other features get implemented in
> HisWord, and if the OLB file format can be used for other information too,
> it might make a good general-purpose reference book application for the
> 200LX.

As would the ability to "expand" and "Contract" the search range on a
multi-word search like the Franklin Ace Bible, example: Search words Judge &
Widow. They might not be next to one another, but In Luke 19, they are 10
words or so apart. Maybe I'd want to expand the range to a whole chapter or
something.

Darren.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 22:39:51 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      Re: Off-topic: Top metrication advocates in USA?
In-Reply-To:  <19991106020658.HUSG21848@lloo-hp.candle.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> > > Didn't this lack of consistencvy cause problems with the spacecraft to
> > > Mars?
> >
> > Yes, that's what the news was reporting; NASA and its contractor weren't
> > in synch.  One used metric and the other the old inch/foot/mile system.
>
> Actually, the metric issue was just a smokescreen to conceal the fact that
> Americans just like things that to go BOOM!
>
I think this is closer to the truth. Anything that get's a close look at the
Martians suddenly goes BOOM!

Darren.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 20:50:43 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Subject:      Re: Flash Disks: 100LX vs 200LX
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

Well, I've a similar problem not able to use memory cards in *every*
device.

Thought I'd be ready to go with a new *BIG* CF card so I could send my 200LX
in for warranty work and get by w/ my unimproved 1MB, 100LX; but the card
works in only the 200LX w/ the compactflash to PC-Card adapter, of course.

David, what's this, "ACECARD3 driver" you mention?

Could it help me?  <I searched SUPER>.

The new CF card is an 80 MB Lexar Media x4 and _USB ENABLED_!! (haven't
tried that part yet, but it comes w/ a cable that is supposed to let you
plug it directly into any USB port and access it as a drive -- could be the
"poor man's way" to add USB <indirectly> to the 200LX <disclaimer: IT WON'T
LET YOU *REALLY* HAVE A USB ENABLED LX ... sorry, trying to head off the
list-mail asking how I'd worked that miracle>.

Any help is appreciated. TIA,

--tim

PS. The 100LX *does* work w/ a 48 MB SanDisk CF card in the same adapter,
etc. and I'll prob. have to make that work -- I wanted the card to be solely
for the office's digital camera; but I'll survive....

PPS. Tech: The 200LX is a DS, 64MB upgrade w/ the drives "swapped" and works
fine; the 100LX is a "pure" 1MB unit, w/ a SN of SG72200065 (not sure how
much of the S/N is rel. and I'm not worried about transmitting it ... should
a cheap 100LX turn up on eBay, you all can check the S/N and say, "Hey!
That's Tim's! I'll email him and see if he sold it..."  ;-)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 20:55:58 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Subject:      External Modems?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

Did anyone ever find a good, external modem portable, AND pref. battery and
externally powered (AC Adapt), currently on the market?

I love all the cute v90 USB modems .... any way to make one work w/ the LX?

I know, in my last LX-post, I said it was impossible, but several folks
here insist on interrupting the naysayers by doing it!! i.e., "The LX will
never have more than 4 Megs of RAM..., uh, I mean 8 ... uh, I mean
32.......uh....."    ;-)   .

TIA,

--tim

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 22:17:21 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord
Comments: To: Darren Frick <dfrick@SNIP.NET>
In-Reply-To:  <LPBBKCBPJMCLNENPHGKCMEIECAAA.dfrick@snip.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Fri, Nov 05, 1999 at 10:39:49PM -0500, Darren Frick wrote:
>
> As would the ability to "expand" and "Contract" the search range on a
> multi-word search like the Franklin Ace Bible, example: Search words Judge &
> Widow. They might not be next to one another, but In Luke 19, they are 10
> words or so apart. Maybe I'd want to expand the range to a whole chapter or
> something.

I'd be interested in seeing how many people would find this addition useful.
Although I can't guarantee that it will make it into this version, I would like
to hear more about "how" it's implemented on the Franklin, and how you envision
the user interface, etc, to look in HisWord.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 22:54:36 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Why 1X speed makes (some) sense.
MIME-version: 1.0

On 1999-11-04 David Sargeant said:

   >Yep, the double-speed upgrade makes the palmtop run twice as fast.
   >It often seems like more, though; when you go back to a 1x unit, it
   >seems unbearably slow.  <g>

Thanks for this clarification.  It makes my upgrade decision easier.  <g>



Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 22:24:31 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Grafix

>> Surpose y'all know that you can download grafix from the web
>> by right buttoning the image.  However, LXPix doesn't dspy it.
>> It gives error msg: UNSUPPORTED SIGNATURE/VERSION.
>> Can someone explain why the down loaded graphics don't dspy
>> with the LXPix, or don't y'all have the problem, or y'all know
>> something I don't.  Hmmmmmmmmmmmmmm...
        Any other suggestions????
>
Semper mobilis,
yor pal al :-) .............

>Al, pal, Look close at the filename that HV wants to save the file as.
>I recall that someimes it puts .htm as the exension by default, instead
>of the correct extension. Usually we're dealing with .JPG's nowadays.
>If I'm right, just change the filename or rename it after saving.
>Lxpic should then display it correctly.
>
Thanks with your reply and advice, it isn't the problem.

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 21:15:49 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Donglok Kim <dong@ICSL.EE.WASHINGTON.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Donglok Kim <dong@ICSL.EE.WASHINGTON.EDU>
Subject:      HisWord
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Thank you very much for your help for resolving my corrupted data problem.
I reinstalled the data file and it shows John 13-15 now.

Since there is an on-going discussion on search capability, I am now
wondering if I can narrow search range for certain word. For example, if I
search 'love', it will pick up the word from Genesis. Can I search it
in CorI only?

Regards,

Donglok Kim

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 22:32:18 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Meyer <bmeyer@UNION-TEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Meyer <bmeyer@UNION-TEL.COM>
Subject:      Re: HisWord
Comments: To: Tom Hoover <lists+hplx@HISWORD.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I really like the search capabilities of Online Bible, but...

Your single window, adjustable in 40, 64 or 80 columns makes more sense as a
general purpose reader with proposed expanded search capabilities. I would
be tickled to have such a reader especially if we could compress text files
into the Online Bible format.

Changing the column size is helpful to me under varying light conditions. If
light is dim, I will use 40 columns in HisWord. If light is bright, 64 or 80
columns.

Bob

Tom Hoover wrote:

> I plan to add "and", "or", and "phrase" search capabilities.

--
+--------------------+-----------------+
|Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
|bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
|Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
+--------------------+-----------------+
|   http://w3.union-tel.com/~bmeyer/   |
+--------------------------------------+

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 00:49:45 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              JScheiner@01019FREENET.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Joerg Scheiner <JScheiner@01019FREENET.DE>
Subject:      Re: mobile phone tapping, what about OGO700LX?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I tried ring.com on my HP200LX without success. This was phone some =
centimeters away. Phone emmediately at the left, right, front and back of =
the palmtop and laying on the keyboard and on the screen.

Equippment: Sagem 850 X mobile phone
   D2 Network
   HP200LX SG51...


Joerg Scheiner

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 22:52:24 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      CF Modem Card
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Anyone know of Compact flash modem cards? I saw one example on
the internet which was the card plus a rather bulky dongle...
Looks unwieldy. Any other ideas? Costs? URLs?

Thanks in advance.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 23:06:14 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, doctor@FRUITBAT.ORG
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peter Castro <doctor@FRUITBAT.ORG>
Subject:      Re: Newton keyboards
In-Reply-To:  <0FKR000S46VLRD@mta4.rcsntx.swbell.net> from "David Ball" at Nov
              5, 99 07:58:01 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

David Ball said ...
>
> On 1999-11-04 Ain Vale said:
>    >The NTKEY2LX driver, written by our Japanese friend MeW in 1996,
>    >allows the LX to receive all commands from the Newton keyboard.  In
>    >other words, yes, it is gloriously SysManager compliant.
> Excellent.  Thanks for this information.
>    >I'm having a patch of trouble getting it to work with Word 5.5
>    >though. It'll type along nicely (and while I have only a 1x unit,
>    >my typing was never fast anyway), but special characters--
>    >basically anything requiring the shift key-- cause the unit to lock
>    >up.  Lock up like hard reset lock up.  Wotta pain!  If someone
>    >knows which file to tap to allow Word to work more smoothly with
>    >the Newton keyboard driver, please let me know.
>
> Have you used the keyboard effectively with PE, my editor of choice on the
> 200LX?  Since PE is designed to be SysManager compliant, I guess I can
> assume that the Newton keyboard w/driver would work effectively with it as
> well.

Yep, the Newton keyboard works well with PE.  Heck, it works well in DOS
mode as well (with vi).  The problem with Work 5.5 might be that Word
tries to intercept the keyboard itself, instead of going through the
normal interrupt chain.  Also, the order of loading the TSR's matters
more than you might think.

>    >My keyboard cost me around $75, plus about another $20 for the
>    >little connector cable which I assembled myself.  I bought the
>    >keyboard on Ebay, but since you're bidding against PalmPilot nuts
>    >sometimes the auction prices get a little high.  You can buy a
>    >Newton keyboard pre-modified for the LX from Shier (and maybe
>    >others) but the cost is higher.
>
> I will check out the price on Shier, then.  The ease of getting it
> premodified would outweigh what I might save on Ebay, I should think.
> Thanks again for this most informative post.

Building your own cable is a bit of a pain (especially if you want to
make it compact enough to put into the Newton keyboard case).  The one
from Shier will definitely be easier, but does cost a bit more.

--
Peter A. Castro (doctor@fruitbat.org) or (pcastro@us.oracle.com)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 23:52:30 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: CF Modem Card
In-Reply-To:  <199911060652.WAA12532@ftel.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 5 Nov 1999, A Meshar wrote:

> Anyone know of Compact flash modem cards? I saw one example on the
> internet which was the card plus a rather bulky dongle... Looks
> unwieldy. Any other ideas? Costs? URLs?

I know Pretec made a 56K version, along with a host of other CF products
like network cards, and they used to advertise their flash cards as 200LX
compatible, but all the CF modems I've seen drew quite a lot of power. The
Pretec modem drew about 275mA.  Seems rather high for such a tiny product.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 05:46:41 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Schneider <mikeschn@AMERITECH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Schneider <mikeschn@AMERITECH.NET>
Subject:      Re: External Modems?
Comments: To: "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Does there exist a dos driver for a PCMCIA USB Card and what is the
current draw? Seems to me that would be your starting point...

Mike...

"Raymond, Timothy CPT--13CPAO" wrote:
>
> Did anyone ever find a good, external modem portable, AND pref. battery and
> externally powered (AC Adapt), currently on the market?
>
> I love all the cute v90 USB modems .... any way to make one work w/ the LX?
>
> I know, in my last LX-post, I said it was impossible, but several folks
> here insist on interrupting the naysayers by doing it!! i.e., "The LX will
> never have more than 4 Megs of RAM..., uh, I mean 8 ... uh, I mean
> 32.......uh....."    ;-)   .
>
> TIA,
>
> --tim
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 16:00:52 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: OT:Fluffiness...
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

We need fresh blood in order to generate new conversations
"on topic" IMHO. I suspect that the HP-LX world has stopped
growing (in any real sense), and as it starts to contract the list
will have the same members in ever fewer numbers.

These "legacy" members already know about modems that can
be used, how to get units expanded, etc.

We need new members to remain "on topic."

My $.02,

Ken
khansen@njcc.com

-----Original Message-----
From: Peniel Romanelli <peniel@WEB2000.NET>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Tuesday, November 02, 1999 11:03 AM
Subject: OT:Fluffiness...


Tue,  2 Nov 1999 10:47:25 -0500 (EST)

Hi gang -

Is it just my imagination, or has the palmtop-related content of the
list dropped below about 30 percent?   Seems to be mostly fluff
lately.   We have threads on dining in Vegas, shows in Vegas, shared
birthdays, cancer etc.   OK - cancer definitely isn't fluff, but it is
way off topic.


Sorry - grumpy this morning...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 16:24:26 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: Off-topic: Top metrication advocates in USA?
Comments: To: lodger@nz1.ibm.com
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Don't blame me - the system was in place before "arrived"
on the scene... ;)

Ken
khansen@njcc.com

-----Original Message-----
From: lodger@nz1.ibm.com <lodger@nz1.ibm.com>
To: HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>; Ken Hansen
<khansen@NJCC.COM>
Date: Tuesday, November 02, 1999 4:46 PM
Subject: Re: Off-topic: Top metrication advocates in USA?


>
>Ken Hansen wrote:
>>The cost of "metrification" would be tremendous, and the debate
>>falls apart when you ask advocates "Why should we adopt the
>>metric system?"
>
>So why did you adopt a metric currency system when there was a perfectly
>good imperial system (Pounds, Shillings and Pence) already in use? <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 08:11:22 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Palmtop200@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "(No Name Available)" <Palmtop200@AOL.COM>
Subject:      His Word-  Where can I find it?
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

I've seen a lot of posting Re. His Word on this newsgroup.  Can someone tell
me where I can get a copy of it (and exactly what it is...  a text file, a
database, as seperate exe file?).  How much free memory does it require?

Thank you in advance for any information you can supply.

  - Bill Gallagher -

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 05:17:22 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Michael Minnick <razzoid@YAHOO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Michael Minnick <razzoid@YAHOO.COM>
Subject:      Hi and External modem
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Hi, this is my first post on this list (obviously),
however, I am not a new palmtop user.
 An external modem that looks promising is at:
http://www.trogoncomputer.com

Hope this helps everybody,
Yoda
My first post to the HPLX is this. :)



=====

__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 07:38:03 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord
Comments: To: Donglok Kim <dong@icsl-gate.ee.washington.edu>
In-Reply-To:  <Pine.SUN.3.96.991105211318.14591K-100000@rise.ee.washington.edu>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Fri, Nov 05, 1999 at 09:15:49PM -0800, Donglok Kim wrote:
>
> Since there is an on-going discussion on search capability, I am now
> wondering if I can narrow search range for certain word. For example, if I
> search 'love', it will pick up the word from Genesis. Can I search it
> in CorI only?

Sure...press "R" (actually "R" will also work) to set the range (i.e. set the beginning
of the range to "1cor" and the end of the range to "2cor").  Press "F2" and search for "love".
Note that the 2nd line shows the word "love" followed by 1Co 1:1 - 2Co 1:1
(your search range).

NOTE: you must set the range _before_ performing the search.

As I keep looking back at HisWord, I'm reminded of features (such as this one)
that I haven't used in a while.  It's been TOO long since I've looked at it,
when I have to lookup the features in my own program!  ;-)

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 07:40:22 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: His Word-  Where can I find it?
Comments: To: Palmtop200@AOL.COM
In-Reply-To:  <0.56933b49.255582fa@aol.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Sat, Nov 06, 1999 at 08:11:22AM -0500, (No Name Available) wrote:
> I've seen a lot of posting Re. His Word on this newsgroup.  Can someone tell
> me where I can get a copy of it (and exactly what it is...  a text file, a
> database, as seperate exe file?).  How much free memory does it require?

1. check the URL below
2. an exe and database requiring ~4.5-5 meg on your flashcard or c: drive
3. ~320k (will run unto SysMgr, or MaxDOS, or DOS, or Software Carousel)

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 07:44:49 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord
Comments: To: Bob Meyer <bmeyer@union-tel.com>
In-Reply-To:  <3823BD61.4903D106@union-tel.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Fri, Nov 05, 1999 at 10:32:18PM -0700, Bob Meyer wrote:
> I really like the search capabilities of Online Bible, but...
>
> Your single window, adjustable in 40, 64 or 80 columns makes more sense as a
> general purpose reader with proposed expanded search capabilities. I would
> be tickled to have such a reader especially if we could compress text files
> into the Online Bible format.

Sorry, no chance of compressing your note files, etc, into the OLB format.  You can,
however, use the program "Diet" in TSR mode (run before HisWord) to allow you
to access "dieted" text files.  I've done this in the past to save disk space.
If you don't know what I'm talking about, let me know and I'll try to add
something to the FAQs.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 08:03:06 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: Swapping Flash Cards
In-Reply-To:  <0FKR000SJ6VRRD@mta4.rcsntx.swbell.net> from "David Ball" at Nov
              5, 99 07:58:06 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

>    >> I just want to report that I'm very happy with my recent purchase
>    >>of  the SCM Microsystems PCMCIA cradle for my desktop computer.
>
> And how much was this purchase, pray tell?

David:

Check out these two links:

http://www.scmmicro.com/products/pccadap/pnp.htm
http://www.envoydata.com/pccarddrives.html

The first is the drive manufacturer, and the latter is the distributor
for the United States..  (There is also a listing for Canadian, Asian,
and European disributors at the SCM Micro web site).  I paid US$115
for it.  I'll give the standard disclaimer - I have no financial
interest in these outfits - just a satisfied customer.

-Chris Lott


--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 08:02:03 -0600
Reply-To:     Maynard Riley <maynard@interaccess.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Maynard Riley <maynard@INTERACCESS.COM>
Subject:      Re: CPack vs Transfile (was: CPack Question and others)
Comments: To: David Ball <dmb10@SWBELL.NET>
In-Reply-To:  <0FKQ004FGDPM57@mta4.rcsntx.swbell.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

On Fri, 5 Nov 1999 09:28:01 +0600, David Ball wrote:

>Does Kermit allow for multiple file transfers at the same time?


I don't think that it can, or would want to, transfer multiple
files concurrently and simultaneously. It can however
understand standard wildcard filespecs; the one shortcoming is
that it doesn't understand anything like '/s' to send a
directory structure. There is a workaround procedure which
allows for unattended scripted transfer of an entire directory
or drive structure.

        `~Maynard

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 08:05:48 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      PCMCIA Tuner?
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

I've seen various ISA and PCI cards for sale that contain complete
television and/or radio tuners for use in your desktop PC.  Has
anyone seen a PCMCIA version of such a device?  And then the next
question would follow... any way to use one on a DOS 100LX?  I'm
not too worried about current draw, as I can use it with my Double
Slot if the power consumption is excessive.

-Chris Lott

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 09:39:11 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      File transfer...
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sat,  6 Nov 1999 09:29:45 -0500 (EST)

Hi Folks -

We've had a lot of discussion of file transfer options (Transfile,
Cpack, Kermit, etc) here.  Thought I'd mention that X-Finder can handle
this very nicely with the installation of a small (11K) program on the
desktop or laptop.  Transfer can be done with a split-screen file
manager (local on one side, remote on the other).  Actual transfer
speed is about 5K/second.  It can transfer directories, preserving the
structure.  XF comes with commands already set up for doing complete
backup and restore.


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 10:12:17 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ness <DNess@HOME.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ness <DNess@HOME.COM>
Subject:      Re: PCMCIA Tuner?
Comments: To: Chris Lott <rclott@MAIL.HIWAAY.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I've seen lots of PCMCIA tuners, but it never occurred to me that
any of them were likely compatable with a mono-CGA screen. I can
safely say that I sure don't think any were...

Chris Lott wrote:
>
> I've seen various ISA and PCI cards for sale that contain complete
> television and/or radio tuners for use in your desktop PC.  Has
> anyone seen a PCMCIA version of such a device?  And then the next
> question would follow... any way to use one on a DOS 100LX?  I'm
> not too worried about current draw, as I can use it with my Double
> Slot if the power consumption is excessive.
>
> -Chris Lott
>
> --
>
> ************************************************************************
> R. Christopher Lott, P.E.                                  rclott@ro.com
> Alpha Beta Technologies, Inc.
> Huntsville, Alabama
> ************************************************************************
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 09:57:43 -0600
Reply-To:     Jack LaRosa <jlarosa@bellsouth.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jack LaRosa <jlarosa@BELLSOUTH.NET>
Subject:      Can't add directory
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hello HPLX compatriots

I offered to help a friend who purchased a new 200LX to replace his
(broken hinge) 100LX. I backed up both machines to a ZIP disk (just in
case) and then proceeded to copy the entire contents of the 100 to the
200. The copy went ok except for a FILE CREATION ERROR when it tried
to copy the SETUP.ENV file to the 200. Skipping over that one, I
continued copying the rest of the 100's files to the 200.

After all the files were copied over, (except the SETUP.ENV) I checked
to make sure the 200 was working correctly and it seemed to be. I then
decided to copy some games I had  and successfully copied 4
directories and their associated files. When I went to copy a 5th
directory it wouldn't let me. I tried to use FILER to create a new
directory but I get an error dialog box that says CAN'T CREATE NEW
DIRECTORY.

The C: drive now contains 5 directories (_DAT was already there) and
59 root directory files. As a test I tried using MEMO to create
another file and save it to the root but MEMO says ERROR WRITING FILE.

Any ideas?

TIA

Jack LaRosa          mailto: jlarosa@bellsouth.net
Using DS/DM HP200LX
Alabama, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 08:34:22 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: OT:Fluffiness...
Comments: To: Ken Hansen <khansen@NJCC.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> We need fresh blood in order to generate new conversations
> "on topic" IMHO. I suspect that the HP-LX world has stopped
> growing (in any real sense), and as it starts to contract the list
> will have the same members in ever fewer numbers.
>
> These "legacy" members already know about modems that can
> be used, how to get units expanded, etc.
>
> We need new members to remain "on topic."

Agree with on topic. I find the growth to be opposite to your
experience. Since the HP announcement, there was a raft of new
products, add-ons, programs, and development of hardware. The
sales in my business have taken a jump up, too. Not gigantic,
but significant, and it seems to hold at the new level now for
about three months. Maybe it tells that people finally decided
to rope themselves in with the 200LX and do not have a reason
to believe anything new (and worthwhile) will come out of HP
in the DOS-compatible computer arena.

I also note the demise of Libretto as possibly part of it.

Personally, I have taken also my own PC 110 out of mothballs
and have been working on putting it together as a "travelling"
back up machine to my palmtops. I have used so far the OB
800CT (a great machine!) and if the IBM can do the stuff I
need, I will smaller stuff to carry while travelling.

It seems to me that the handheld "serious" _mobile_ computing
(which excludes in my mind almost all the WinCE line) is
becoming incredibly interesting to people. This is probably
fed by people being fed-up with WinCE, by advances in mobile
telephony, and the real growing need to have computing on the
go, pervasive, everywhere, all the time.

Best regards,

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 11:01:41 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: Questioon about upgrading a 200LX
Comments: To: David Ball <dmb10@SWBELL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<I'm interested in upgrading my 2MB 200LX to doublespeed/8 megs of RAM.
Since I'm having problems with my Internet connection, I can't access
the Thaddeus web site to find out.  Is such an upgrade possible, and
how much is it?>>

It's $159.  You can call us at 800 373 6114.  You will receive within 1 week
after we receive the unit.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 11:25:27 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      FS: acCIS v4.0
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

I received acCIS v4.0 with the palmtop that I just bought.  Since I haven't had
a CIS account in years, is anyone interested in purchasing it?  I don't even
know if CIS still supports text-based logins.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 12:17:22 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Using 200LX as WWW browser
MIME-version: 1.0

Since I'm going to be upgrading my 200LX soon, I was wondering exactly
how *useful* the 200LX is for Web surfing via WWW-LX.  With a
doublespeed unit, just how much serious work can one get done?  I like
the fact that more and more of my computing needs are being met by this
superb little computer.  Already I'm doing all of my in-class
notetaking and record-keeping on this unit, as well as all my email.

If I can do some serious web-surfing for informational purposes (as
opposed to graphical entertainment, which is reserved for my desktop,)
than I can just take my 200LX with me when I travel.  It would be nice
to be able to retire my laptop completely.  <Grin>

Any reccommendations along this line would be greatly appreciated.



Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 12:17:29 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Off-topic:  Nokia 5170
MIME-version: 1.0

Well, I'm thinking of purchasing this digital phone, and I thought I'd
post a couple of questions to the list.  First, has anyone on the list
had any experiences with this type of phone, positive or negative?  And
secondly, does the phone weork in conjunction with the 200LX, and if
so, how?

Any information would be greatly appreciated.  To avoid unnecessary
bandwidth on the list, replies can be sent to me directly at
dmb10@swbell.net  .  I will summarize the responses for the list in
case anyone's interested.

Thanks,

David Ball

Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 12:17:34 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: MS Word
MIME-version: 1.0

Ain Vale stated firmly that...
   >A while back there was a brief thread on using a Newton keyboard
   >with MS Word.  I've just downloaded Word from the Microsoft website
   >onto the flash card in my LX.  Or rather, I just got it to work,
   >finally--...{snip}...

Now that you've gotten MS Word 5.5 for DOS working on the 200LX, how
well does it run?  Does this word processor rate higher in your opinion
than say, Word Perfect 5.1?


Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 11:12:07 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      FLUFF: Test post
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

To the newsgroup..

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 20:08:01 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: Can't add directory
In-Reply-To:  <18415.991106@bellsouth.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 6 Nov 1999, Jack LaRosa wrote:

...
> The C: drive now contains 5 directories (_DAT was already there) and
> 59 root directory files. As a test I tried using MEMO to create
> another file and save it to the root but MEMO says ERROR WRITING FILE.
>
> Any ideas?

Are you sure there is any free space left on C:?

Other than that, try exiting to DOS and running chkdsk. Always a good
measure.


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 20:13:55 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Subject:      PE and TAB
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

How does the TAB key work in PalEditor?

The documentation says that it inserts spaces until the next tab stop,
but it seems that the tab stops are not the same in every text line,
i.e. when I press TAB on different lines I get the cursor at different
columns.

Paulo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 20:23:59 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: FS: acCIS v4.0
Comments: To: Tom Hoover <lists+hplx@HISWORD.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I received acCIS v4.0 with the palmtop that I just bought.  Since I haven't had
> a CIS account in years, is anyone interested in purchasing it?  I don't even
> know if CIS still supports text-based logins.


While there is little ascii stuff still on cis (old mail still exists if
you did not want a pop3 account), ACCIS 4 works with both the ascii and
newer HMI standard and still is CURRENT for cis forum and mail stuff.
In other words, ACCIS 4 (FOUR) WORKS!!! (G)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 20:24:23 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Can't add directory
Comments: To: Jack LaRosa <jlarosa@bellsouth.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> to copy the SETUP.ENV file to the 200. Skipping over that one, I
> continued copying the rest of the 100's files to the 200.

Besides Setup.env, you should probably NOT copy appmgr.dat.  While I
don't know if that is the problem, I believe that file is also 100/200
specific.  Neither file should be restored from the 100 to the 200.

And then, since you did not copy setup.env, you might not have the
disk/memory allocation that existed on his 100.  You might now have more
memory and less disk space.  Use Ctrl-Filer and check out the advanced
settings.  There are other settings that he might have grown use to,
like memory in dos, etc.  So check all of that stuff out.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 15:11:20 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: HisWord bookmarks
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Tom wrote:
>Bookmarks have worked since v1.0.

My normal bookmarks work great but the place setter bookmark (i.e. Alt+F0)
has been unreliable for me. I can never resume my place where I left of
from. Usually, the program starts in the middle of Genesis 1. Solutions?

__ms__

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 15:22:49 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: FS: acCIS v4.0
In-Reply-To:  <19991106202359.NFTK6862@worldnet.att.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Sat, Nov 06, 1999 at 08:23:59PM +0000, F. Kaufman wrote:
> > I received acCIS v4.0 with the palmtop that I just bought.  Since I haven't had
> > a CIS account in years, is anyone interested in purchasing it?  I don't even
> > know if CIS still supports text-based logins.
>
>
> While there is little ascii stuff still on cis (old mail still exists if
> you did not want a pop3 account), ACCIS 4 works with both the ascii and
> newer HMI standard and still is CURRENT for cis forum and mail stuff.
> In other words, ACCIS 4 (FOUR) WORKS!!! (G)

Well, it's good to know that is still works with CIS.  Thanks for the info!

If anyone is interested, I'll sell it for $45 (including shipping) or best
offer.  Price from Shier.com is $89.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 15:37:42 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord bookmarks
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
In-Reply-To:  <005601bf289b$c30cc860$c63d1b3f@satellite>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Sat, Nov 06, 1999 at 03:11:20PM -0600, Matthew W. Sheffield wrote:
>
> My normal bookmarks work great but the place setter bookmark (i.e. Alt+F0)
> has been unreliable for me. I can never resume my place where I left of
> from. Usually, the program starts in the middle of Genesis 1. Solutions?

The "place setter" bookmark is totally automatic.  To enable it, add
"BookMark=Genesis 1:1" to the User section of HisWord.cfg.  When you start
HisWord, you'll be placed at Genesis 1:1, instead of a "blank screen" on screen
level "0".  If you read a few chapters, and then quit HisWord, your "place"
will be saved.  When you restart HisWord, you'll be returned to your "place".
Note that this feature does not use any key combination to activate
it...HisWord just updates the "BookMark" setting in HisWord.cfg anytime you
quit the program.  (NOTE: this means that if you reboot your palmtop with
HisWord running, it will not save your "place".)  Also note that your "reading"
must take place on the initial screen level (level 0).  If you want to save
your place in any other screen level, use the normal ctrl-F1 thru ctrl-F10 key
commands.

Please note that you can start the BookMark with any verse in the Bible...not
just Genesis 1:1.

I hope that made sense.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 17:17:16 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Mberri01@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Michael Berrier <Mberri01@AOL.COM>
Subject:      HPLX Backlight
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Hi list,
please up date me with the backlight for HP 200LX.
Is the LX now available? Will a up grade for the exising LX will be
available? What is the situation? Thanks in advance
Michael

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 14:49:44 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: MS Word
In-Reply-To:  <0FKS00E87G86BJ@mta3.rcsntx.swbell.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 6 Nov 1999, David Ball wrote:

> Now that you've gotten MS Word 5.5 for DOS working on the 200LX, how
> well does it run?  Does this word processor rate higher in your
> opinion than say, Word Perfect 5.1?

I used both, and Word 5.5 is definitely easier and more similar to Windows
word processors than WP51, but I find WP51 faster and vastly more
powerful.  It does have some annoying features, though, such as the
non-standard highlighting (Alt-F4 instead of just holding down shift).

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 14:50:17 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: HPLX Backlight
Comments: To: Mberri01@AOL.COM
In-Reply-To:  <0.d83185a1.255602ec@aol.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 6 Nov 1999, Michael Berrier wrote:

> please up date me with the backlight for HP 200LX. Is the LX now
> available? Will a up grade for the exising LX will be available? What
> is the situation? Thanks in advance

Check out the backlight FAQ at http://www.hplx.net.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 18:09:39 -0500
Reply-To:     "Michael R. Batchelor" <michaelb@ind-info.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Michael R. Batchelor" <michaelb@IND-INFO.COM>
Subject:      Lotus Agenda?
Comments: To: A Meshar <sponsor@FTEL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

With the discussions about staying "on topic" by fresh blood, let me
offer one I'm sure most of you already know. I'm interested in
purchasing an LX specifically to run Lotus Agenda on the road. I find a
Palm Pilot to be "not quite enough," but that's true of all the PIMs
I've tried since the beginning. (Frankly, Agenda could use a real
healthy update, too. But I don't own the code.) I'm also a little
reluctant because of the size. It's a little big to tote around not
inside your brief case, and once it gets inside a brief case it may as
well be left in the airport bathroom for all it will ever get used.

So my question is, "Does anyone here use the LX for this?" I'm not
really interested in the ten thousand "other great things" that a
palm-top can do. I just want a good place to store notes quickly and get
them assigned to categories for me. And an LX seems to be cheaper than a
personal secretary to go through my daytimer. If you use Agenda, how
well does it work? How easily can you keep data in sync with a desktop
within the Agenda environment? (I know the files can be transferred. How
do you not get out of sync?)

Any other gotcha's before I try to convince my wife I need to sink more
into an organizer when she already gave me a palm pilot.

Thanks,
MB

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 18:53:24 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: MS Word
Comments: To: dmb10@SWBELL.NET
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Sat, 6 Nov 1999 12:17:34 +0600 David Ball <dmb10@SWBELL.NET> writes:
> Now that you've gotten MS Word 5.5 for DOS working on the 200LX, how
> well does it run?  Does this word processor rate higher in your
> opinion than say, Word Perfect 5.1?

It's simple.  You want a decent wordprocessor which is easy to use? Use
Word.  You want power and real control of the printed output?  Use
Wordperfect.   Before Windows became potty trained, Wordperfect had the
best print quality of any DOS programs I ever used.  But it is not easy
to use.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 19:41:30 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: HisWord bookmarks
Comments: To: lists+hplx@HISWORD.NET
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Sat, 6 Nov 1999 15:37:42 -0600 Tom Hoover <lists+hplx@HISWORD.NET>
writes:
>   Also note that  your "reading" must take place on the initial screen
level (level 0).  If you want
> to save your place in any other screen level, use the normal ctrl-F1
thru
> ctrl-F10 key commands.

Oh, so it is a feature.  All this time I thought it was  a bug.  8=)
Any chance of changing this to the last screen you are in when you quit,
regardless of the level?

Domingo

P.S.  I believe I was in the last beta two years ago, but my email
address has changed several times since then.  I remember your
disappointment with the lack of beta members' input, and I suspected this
to be one reason why you put the program aside for a while.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 19:25:25 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: HisWord
Comments: To: lists+hplx@HISWORD.NET
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Fri, 5 Nov 1999 18:57:05 -0600 Tom Hoover <lists+hplx@HISWORD.NET>
writes:
> Adding/editing notes, topics, and definitions has worked since v1.2
> (I just checked).

Hi Tom.

Are you planning to implement the rest of the Online Bible features (the
essential ones, at least)?  For example, the ability to select a note or
topic, highlight the Bible reference, press enter, and out pops the Bible
text.  This would render the Online Bible program itself unnecesary.

Also, if the notes, topics, etc. could display in zoom modes as well as
the text, it would be neat.


On another note, the last version of the Online Bible for DOS (the one on
Tom's web site) doesn't appear to contain the manual file.   If anyone
has it and was willing to email it to me, I would be very grateful.
While the last version would be best, any version would do.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 19:03:02 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: HisWord
Comments: To: rclott@MAIL.HIWAAY.NET
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Fri, 5 Nov 1999 17:36:58 -0600 Chris Lott <rclott@MAIL.HIWAAY.NET>
writes:
> > Enjoy studying His Word with HisWord!
>
> Tom:
>
> Is there a FAQ somewhere that explains the installation of the basic
> OLB system that is required before I can use HisWord?  I purchased
> a complete set of material from Mr. Linder last year.  I had a rough
> time getting all the various translations and study guides
> installed,

I wish I could buy the CDROM.  It's getting very hard to find web sites
with the Online Bible for Dos lately, and then they only have a few
materials.

As far as the installation, are you aware of the fact that you have to
unzip the zip files into floppies before it will install?  Just wondering
(it will not install from the cd.  I once was able to trick the install
program by installing it from a hard disk, and using the SUBST command,
but it is not a reliable method).

Domingo

P.S. Hmm, you live 2 hours from me.  I live near Chattanooga, Tenneessee.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 19:01:49 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord
In-Reply-To:  <19991106.194930.-33737.2.ddvteach@juno.com>; from
              ddvteach@juno.com on Sat, Nov 06, 1999 at 07:25:25PM -0500
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Sat, Nov 06, 1999 at 07:25:25PM -0500, d dv wrote:
> Are you planning to implement the rest of the Online Bible features (the
> essential ones, at least)?  For example, the ability to select a note or
> topic, highlight the Bible reference, press enter, and out pops the Bible
> text.  This would render the Online Bible program itself unnecesary.

Yes.  I'll be working on the advanced search first (since it seems to be the
most desired feature), and then the select feature.

> Also, if the notes, topics, etc. could display in zoom modes as well as
> the text, it would be neat.

I'll add it to the list...probably won't make it into this version though.

> On another note, the last version of the Online Bible for DOS (the one on
> Tom's web site) doesn't appear to contain the manual file.   If anyone
> has it and was willing to email it to me, I would be very grateful.
> While the last version would be best, any version would do.

If no one else comes up with it, remind me and I'll dig thru my old files.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 19:07:13 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord bookmarks
Comments: To: d dv <ddvteach@JUNO.COM>
In-Reply-To:  <19991106.194931.-33737.3.ddvteach@juno.com>; from
              ddvteach@JUNO.COM on Sat, Nov 06, 1999 at 07:41:30PM -0500
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Sat, Nov 06, 1999 at 07:41:30PM -0500, d dv wrote:
> On Sat, 6 Nov 1999 15:37:42 -0600 Tom Hoover <lists+hplx@HISWORD.NET>
> writes:
> >   Also note that  your "reading" must take place on the initial screen
> level (level 0).  If you want
> > to save your place in any other screen level, use the normal ctrl-F1
> thru
> > ctrl-F10 key commands.
>
> Oh, so it is a feature.  All this time I thought it was  a bug.  8=)
> Any chance of changing this to the last screen you are in when you quit,
> regardless of the level?

I don't think this would be a good idea.  Let's say that I'm using the BookMark
feature to keep track of my reading thru the Bible (the intended use of the
BookMark feature).  After reading a couple of chapters today, I decide to do a
quick search and end up looking at another verse when I quit.  When I restart,
I'd be returned to the wrong location.

> P.S.  I believe I was in the last beta two years ago, but my email
> address has changed several times since then.  I remember your
> disappointment with the lack of beta members' input, and I suspected this
> to be one reason why you put the program aside for a while.

Is your Juno address the one that I should use to update the beta tester's
list?

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 20:42:54 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: HisWord bookmarks
Comments: To: lists+hplx@hisword.net
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Sat, 6 Nov 1999 19:07:13 -0600 Tom Hoover <lists+hplx@hisword.net>
writes:
> On Sat, Nov 06, 1999 at 07:41:30PM -0500, d dv wrote:
> > On Sat, 6 Nov 1999 15:37:42 -0600 Tom Hoover
> <lists+hplx@HISWORD.NET>
> > writes:
> > >   Also note that  your "reading" must take place on the initial
screen
> > level (level 0).  If you want to save your place in any other screen
level, use the normal
> ctrl-F1 thru ctrl-F10 key commands.
> > Any chance of changing this to the last screen you are in when you
> quit, regardless of the level?
>
> I don't think this would be a good idea.  Let's say that I'm using
> the BookMark feature to keep track of my reading thru the Bible (the
intended use
> of the BookMark feature).  After reading a couple of chapters today, I
> decide to do a quick search and end up looking at another verse when I
quit.  When
> I restart, I'd be returned to the wrong location.

I guess it  does make sense.   How about expanding the number of  ctrl-Fn
bookmarks available?  Personally I would find that converting all the
search mode bookmarks into view mode bookmarks would be more useful for
me.  Since I am sure some people use search mode bookmarks, how about an
option in the cfg file to change this to either way?

> Is your Juno address the one that I should use to update the beta
> tester's list?

It is my usual address, but since I don't want to miss out if I move
again, you can use this one instead:
ddvteach@yahoo.com

Thanks for a great program!

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 20:19:35 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord bookmarks
Comments: To: d dv <ddvteach@JUNO.COM>
In-Reply-To:  <19991106.204334.-33737.4.ddvteach@juno.com>; from
              ddvteach@JUNO.COM on Sat, Nov 06, 1999 at 08:42:54PM -0500
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Sat, Nov 06, 1999 at 08:42:54PM -0500, d dv wrote:
> I guess it  does make sense.   How about expanding the number of  ctrl-Fn
> bookmarks available?  Personally I would find that converting all the
> search mode bookmarks into view mode bookmarks would be more useful for
> me.  Since I am sure some people use search mode bookmarks, how about an
> option in the cfg file to change this to either way?

I can add it to the list, but this will require a rewrite of this section of
the program.  Notice how ctrl is used to save all bookmarks...both view and
search?  And that shift and alt are used to recall the bookmarks?

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 21:33:14 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Mexico Metro Map
Comments: To: Stefan.Peichl@t-online.de
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Thu, 4 Nov 1999 23:24:53 +0000 Stefan.Peichl@t-online.de writes:
> > <Stefan.Peichl@T-ONLINE.DE> writes:
> > Yahoo USA can design any street map in the US that you wish (and
> some other countries also, I think).  It would be great if those maps
> were directly viewable from your program.  In the old list someone
> spoke about a tedious process of conversion, and still it was not quite

> readable in your program.   Any hope on this?
>
> I guess the problem is, that these a color maps. Indeed you can
> also use color maps with LXMAP, even true color (16.777.216 colors)
> PCX maps, but the performance of LXMAP would go down to useless,
> because the colors have to be reduced to black and white and
> dithered. That needs a lot of calculation to be done and the
> result may not be readable on the palmtops 2-color screen.

While color pics are slow on the palmtop, I have viewed them before, and
the speed did not bother me.  The problem with the maps I mentioned is
that the street names do not appear to be readable on ANY graphics
program I have tried, only on a web browser.  Also, the conversion
process sometimes renders some of the colors unviewable, rendering the
maps unusable.  I was not asking that you improve the speed of your
program, but that you support the viewing of such maps directly, which
would render the need for a map database unnecesary, but I guess you are
not interested from what you said.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 21:43:46 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: HisWord bookmarks
Comments: To: lists+hplx@hisword.net
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Sat, 6 Nov 1999 20:19:35 -0600 Tom Hoover <lists+hplx@hisword.net>
writes:
>
> I can add it to the list, but this will require a rewrite of this
> section of the program.  Notice how ctrl is used to save all
bookmarks...both
> view and search?  And that shift and alt are used to recall the
bookmarks?

I know, I know, I just was careless with how I quoted what you wrote.
8=)
But got my point, in spite of my carelessness.


Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 20:47:27 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: HisWord bookmarks
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Ahh. I never noticed that level 0 was the only one that you could do that
with. While I see your rationale for making it this way, how about making
HisWord keep track of the reading done on the initial screen during
run-time, but allowing the user (via Ctrl+B perhaps?) to override this
variable? That way, you won't accidentally lose your place but at the same
time you can change it if you choose to.

__ms__

Also, are you planning to add a split column feature like OLB has? That'd be
really useful for me.

>> >   Also note that  your "reading" must take place on the initial screen
>> level (level 0).  If you want
>> > to save your place in any other screen level, use the normal ctrl-F1
>> thru
>> > ctrl-F10 key commands.
>>
>> Oh, so it is a feature.  All this time I thought it was  a bug.  8=)
>> Any chance of changing this to the last screen you are in when you quit,
>> regardless of the level?
>
>I don't think this would be a good idea.  Let's say that I'm using the
BookMark
>feature to keep track of my reading thru the Bible (the intended use of the
>BookMark feature).  After reading a couple of chapters today, I decide to
do a
>quick search and end up looking at another verse when I quit.  When I
restart,
>I'd be returned to the wrong location.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 20:55:02 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord bookmarks
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
In-Reply-To:  <005501bf28ca$72990900$a63d1b3f@satellite>; from
              mws722s@MAIL.SMSU.EDU on Sat, Nov 06, 1999 at 08:47:27PM -0600
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Sat, Nov 06, 1999 at 08:47:27PM -0600, Matthew W. Sheffield wrote:
> Ahh. I never noticed that level 0 was the only one that you could do that
> with. While I see your rationale for making it this way, how about making
> HisWord keep track of the reading done on the initial screen during
> run-time, but allowing the user (via Ctrl+B perhaps?) to override this
> variable? That way, you won't accidentally lose your place but at the same
> time you can change it if you choose to.

That's a good idea, and easy to implement.  In the meantime, you can manually
edit hisword.cfg to set a "new" starting place.

> Also, are you planning to add a split column feature like OLB has? That'd be
> really useful for me.

Probably not in the near future.  That would require a major rewrite of the
display functions.  Additionally, it would not be very useful in anything other
than 80 column mode.  I'll add it to the request list anyway.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 21:50:02 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      US city database for World Time?
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

I was in Key West this week, and flying back we flew over Sarasota,
=46L, and I wondered where both were exactly.

I'd like to have a World Time database containing the locations of US
cities, maybe a few hundred of the larger ones. I think if I could
find a web location that listed their latitudes and longitudes, I
could get it into WDB format. Does anyone know where I could find
this?

thanks,

--=20
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 21:28:00 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      ICE 200
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Does anyone know if there is an update of ICE100 that enables it to work
with the 200LX?

__ms__

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 20:13:36 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: US city database for World Time?
In-Reply-To:  <CvYkOCrRmx4ji2Hz2V4Bp=6jDP6e@4ax.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 6 Nov 1999, Curtis Cameron wrote:

> I'd like to have a World Time database containing the locations of US
> cities, maybe a few hundred of the larger ones. I think if I could
> find a web location that listed their latitudes and longitudes, I
> could get it into WDB format. Does anyone know where I could find
> this?

Longden Loo and I worked on doing this sort of thing a while back.
The USGS has a database of all US cities, and huge databases of cities and
other features by state, and I think Longden imported all the larger
cities in California into World Travel 2.0, thus giving him the ability to
do just what you want.  I'll search my mail archives and look for the URLs
to both the database of all cities (which you could then sort by city size
and use the ones you want) and the state databases, unless Longden
remembers those addresses.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 23:14:33 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: CP Pack and Fluff/Motorcycle
Comments: To: Tom Nemeth <tnemeth@compuserve.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> 1.  CPPack:  I just can't get it to work.  I've seen all the NT tricks =
but
> I'm running win98 (CP worked great on my Compaq Aero (original)).  Can
> someone send me their techniques please?

I run the 100LX CPACK under Win98 in MS-DOS mode.  Right-click the CPACK =
icon
and select properties.  Select Program and Advanced, then check the box =
for Use
MS-DOS mode.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 22:22:58 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: US city database for World Time?

There is a worldtime pgm for W9x on the ten best list at PC Mag
Made from Paw Print V5.2.0.511  Just got it a few days ago.
It has a db of all the lat and longs.
Let me know if you have trouble finding it.

Semper mobilis,
yor pal al :-) .............

>I was in Key West this week, and flying back we flew over Sarasota,
>=46L, and I wondered where both were exactly.
>
>I'd like to have a World Time database containing the locations of US
>cities, maybe a few hundred of the larger ones. I think if I could
>find a web location that listed their latitudes and longitudes, I
>could get it into WDB format. Does anyone know where I could find
>this?
>
Curtis Cameron
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 22:57:26 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: MS Word
MIME-version: 1.0

On 1999-11-06 you said:
   >I used both, and Word 5.5 is definitely easier and more similar to
   >Windows word processors than WP51, but I find WP51 faster and
   >vastly more powerful.  It does have some annoying features, though,
   >such as the non-standard highlighting (Alt-F4 instead of just
   >holding down shift).

<Grin>  Can you believe that WP 5.1 is the first word processor I ever used,
and for some reason, Alt-F4 always seemed a "logical" way to highlight.
<VBG>

For most tasks, I still find WP 5.1 to be quite sufficient.  Ironic, eh?



Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 22:57:31 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: MS Word
MIME-version: 1.0

On 1999-11-06 Domingo said:
   >It's simple.  You want a decent wordprocessor which is easy to use?
   >Use Word.  You want power and real control of the printed output?
   >Use Wordperfect.   Before Windows became potty trained, Wordperfect
   >had the best print quality of any DOS programs I ever used.  But it
   >is not easy to use.

Ahh, but its capabilities!  The macro language of Word Perfect 5.1 for DOS
was unparalled for its power.  The walk down memory lane...<g>


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 21:16:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bryan R Leipper <nvassoc@IBM.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bryan R Leipper <nvassoc@IBM.NET>
Subject:      Re: US city database for World Time?
Comments: To: Curtis Cameron <curtc@AIRMAIL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Curtis Cameron wrote:
> I'd like to have a World Time database containing the locations of US
> cities, maybe a few hundred of the larger ones. I think if I could
> find a web location that listed their latitudes and longitudes, I

check out

www.census.gov/geo/www/gazetteer/places.html

it contains references to:

FTP compressed versions of:
<ul>
<li><a
href=ftp://ftp.census.gov/pub/tiger/tms/gazetteer/places.zip><em>places.zip</em></a>
791470 bytes
<li><a
href=ftp://ftp.census.gov/pub/tiger/tms/gazetteer/mcds.zip><em>mcds.zip</em></a>
1253225 bytes
<li><a
href=ftp://ftp.census.gov/pub/tiger/tms/gazetteer/counties.zip><em>counties.zip</em></a>
115326 bytes
<li><a
href=ftp://ftp.census.gov/pub/tiger/tms/gazetteer/zips.zip><em>zips.zip</em></a
> 687520 bytes
</ul>

The <strong>Place</strong> file contains all places in the U.S. and
outlying areas (excluding MCDs and CCDs) as of the 1990 Census, and is
plain ASCII text, one line per record.  The fields are laid out as
follows:
<ul>
<li>Columns 1-2: State FIPS Code
<li>Columns 4-8: Place FIPS Code (for <em>places.txt</em> unique ID for
each pla
ce)
<li>Columns 10-75: Name.  Includes name of place and type (either city,
town, borough, village, or CDP).
<li>Columns 77-78: State Abbreviation
<li>Columns 80-88: Total Population (1990)
<li>Columns 90-98: Number of Housing Units (1990)
<li>Columns 100-109: Land area included (in thousandths of a square
kilometer)
<li>Columns 111-120: Water area included (in thousandths of a square
kilometer)
<li>Columns 122-130: Latitude (millionths of a degree: 106 units=1
deg). First
character is + or -, denoting N or S latitude, respectively.
<li>Columns 132-141: Longitude (millionths of a degree). First character
is +
or -, denoting E or W longitude, respectively.
</ul>
Source: Census Geographic Information Coding Scheme (GICS).<p>

a lot of other GIS stuff and references here as well.

--
Bryan
Leipper Management Group at TechComm Labs
Education, management, and information services
especially for small businesses and associations.
Telephone (voice) and Telecopier (fax) 775 972 5011
-----------------------------------------------------------
nvassoc@attglobal.net
-----------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 21:30:14 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: US city database for World Time?
In-Reply-To:  <38250B10.A9976CAF@ibm.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 6 Nov 1999, Bryan R Leipper wrote:

> www.census.gov/geo/www/gazetteer/places.html

That's the one I was looking for!  Thanks.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 20:12:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Larry Mittell <lmittel@IBM.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Larry Mittell <lmittel@IBM.NET>
Subject:      Re: Questioon about upgrading a 200LX
Comments: To: Hal Goldstein <hal_goldstein@THADDEUS.COM>
In-Reply-To:  <B0AB4DD57CD5D1118A230060975A10053468B1@mailhost.thaddeus.c om>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Hi Hal--

I've got a Korean HP200LX that I was thinking of upgrading. Any reason why it wouldn't be a good candidate? As far as I can tell, the only difference between it and my US version is that the keyboard has Korean character labels above the letter keys. There must be a way to type those characters, but I haven't discovered it yet (nor am I particularly interested in it). ;-)

Larry Mittell

At 09:01 AM 11/06/1999 , you wrote:

>It's $159.  You can call us at 800 373 6114.  You will receive within 1 week
>after we receive the unit.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 23:27:11 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Organization: Orion Enterprises
Subject:      Re: Can't add directory
Comments: To: Jack LaRosa <jlarosa@BELLSOUTH.NET>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="------------C7DA6AA18D7B7F28CDFE046B"

This is a multi-part message in MIME format.
--------------C7DA6AA18D7B7F28CDFE046B
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Jack, et al;

A DOS floppy can only have 112 files/directories in the root directory,
a DOS-formatted (FAT16) hard disk can only have 512 files/directories in
the root directory.  Could it be that the 200LX only allows 64
files/directories in the root directory?  A 64-entry limit would be
consistent in that it is evenly divisible by 8.  Anyone care to test?

Richard Smith


Jack LaRosa <jlarosa@BELLSOUTH.NET> wrote:

Hello HPLX compatriots
<snip>
The C: drive now contains 5 directories (_DAT was already there) and
59 root directory files. As a test I tried using MEMO to create
another file and save it to the root but MEMO says ERROR WRITING FILE.


--------------C7DA6AA18D7B7F28CDFE046B
Content-Type: text/x-vcard; charset=us-ascii;
 name="rsmith.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Richard A. Smith / Patti Smith
Content-Disposition: attachment;
 filename="rsmith.vcf"

begin:vcard
n:Smith;Richard and Patti
x-mozilla-html:FALSE
org:Orion
adr:;;;;;;
version:2.1
email;internet:rsmith@enol.com
note;quoted-printable:aka, on eBay: seronac@auction.skytel.com=0D=0A*=0D=0A"Statistically, at least half of the people in the world are of below-average intelligence." * =0D=0A"If variety is the spice of life, then humor is the dessert." *
fn:Richard and Patti Smith
end:vcard

--------------C7DA6AA18D7B7F28CDFE046B--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 02:48:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Cliff Crittenden <d040957c@DC.SEFLIN.ORG>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Cliff Crittenden <d040957c@DC.SEFLIN.ORG>
Subject:      us city data base for world time
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Curtis, there is a program at SUPER called "Whereami".

Included in that zip file is a databse of every U.S. city.

I use "List" by Berg or "Max Find" by Stan Peters when I want to search
for a city.

The program "Whereami" is interesting. You put in a lat and long position
and the program will give you a bearing and distance to the 5 closest cities.

HTH,

Cliff

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 6 Nov 1999 23:57:20 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden Loo <LLoo@WORLDNET.ATT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <LLoo@WORLDNET.ATT.NET>
Subject:      Re: US city database for World Time?

> > I'd like to have a World Time database containing the locations of US
> > cities, maybe a few hundred of the larger ones. I think if I could
> > find a web location that listed their latitudes and longitudes, I
> > could get it into WDB format. Does anyone know where I could find
> > this?

> Longden Loo and I worked on doing this sort of thing a while back.
> The USGS has a database of all US cities, and huge databases of cities
and
> other features by state, and I think Longden imported all the larger
> cities in California into World Travel 2.0, thus giving him the ability
to
> do just what you want.  I'll search my mail archives and look for the
URLs
> to both the database of all cities (which you could then sort by city
size
> and use the ones you want) and the state databases, unless Longden
> remembers those addresses.

Yes, Brian Leipper's note points to the correct URL where we got the info:

www.census.gov/geo/www/gazetteer/places.html

I also needed a special version of the World Time program to handle the
larger number of cities (876).  Since I don't get out of the state very
often, the default US cities already provided have been adequate, but I
constantly surprise other people when they need to get a distance estimate
between cities in this state.

The downloaded files from the Census site were manipulated using a freeware
utility from Simtel called CONVR803, which does database conversions and
filtering for dbf, wks and column oriented text files.  But I doubt
database handling is any problem for Curtis <g>.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 00:34:24 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: US city database for World Time?
In-Reply-To:  <19991107075813.CIW24056@lloo-hp.candle.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 6 Nov 1999, Longden Loo wrote:

> I also needed a special version of the World Time program to handle
> the larger number of cities (876).  Since I don't get out of the state
> very often, the default US cities already provided have been adequate,
> but I constantly surprise other people when they need to get a
> distance estimate between cities in this state.

What I'd like is a version that can handle all of the cities in the US.
<g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 13:14:27 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: ICE 200
In-Reply-To:  <008a01bf28d3$8c04d280$a63d1b3f@satellite>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 6 Nov 1999, Matthew W. Sheffield wrote:

> Does anyone know if there is an update of ICE100 that enables it to work
> with the 200LX?

ice100.zip includes two versions, one for the 100LX and one for the 200LX.
Actually, I believe that the program was originally written for the 200LX
to make it display the icons from the 100LX.


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 07:55:24 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Palmtop200@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "(No Name Available)" <Palmtop200@AOL.COM>
Subject:      Curtis:  US city coordinates
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Hello Curtis,
   I've enjoyed many of your programs over the years.  Thank you.  Following
is a site where you can fine the Longitute & Latitude of US cities:

http://www.mit.edu:8001/geo?

  - Bill Gallagher -

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 13:25:51 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Subject:      Re: PE and TAB
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

The following file was written in PE, pressing TAB before each 'x':

        x x   x       x       x
1 x   x       x       x       x
22  x     x   x       x       x
333   x       x       x       x
4444    x x   x       x       x
55555     x   x       x       x
666666      x     x   x       x
7777777       x       x       x
88888888        x x   x       x

It seems that only the second or thrird TAB stops is aligned at columns
multiple from 8.

Is this a bug, or do I have something not well configured?

Paulo

Paulo Custodio wrote:
>
> How does the TAB key work in PalEditor?
>
> The documentation says that it inserts spaces until the next tab stop,
> but it seems that the tab stops are not the same in every text line,
> i.e. when I press TAB on different lines I get the cursor at different
> columns.
>
> Paulo
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 08:35:04 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Victor Roberts <robertsv@IX.NETCOM.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Victor Roberts <robertsv@IX.NETCOM.COM>
Subject:      Re: Question about Buddy
Comments: To: David Ball <dmb10@SWBELL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 27 Oct 1999, David Ball <dmb10@SWBELL.NET> wrote:

> I am currently using Buddy with Nettamer.  Since Nettamer shells out to DOS
> when it uses your editor program to read your mail, you lose Buddy at that
> point.  I know that Buddy is active when I first start Nettamer, but when it
> shells out to DOS to load your editor, Buddy is lost at that point.  Any
> help in resolving this problem would be greatly appreciated.

I was not aware that this was happening. If this happens with
Nettamer, it must also happen when I use WWW/LX and call PE to
edit a message. Yet d-click and other functions seem to still
work in PE. Which Buddy features are you trying to use when
you shell to DOS?

I just tested this with Nettamer palmtop using PE as my editor,
and Buddy still seems to be active. Which editor are you using?

Vic

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 22:41:37 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              ITSUMI ken-ichi <amt@ITSUMI.KEN.ORG>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         ITSUMI ken-ichi <amt@ITSUMI.KEN.ORG>
Subject:      Morphy one
Comments: To: tlug@tlug.gr.jp
Comments: cc: PXW07530@nifty.ne.jp
MIME-Version: 1.0 (generated by SEMI 1.10.1 - "Morimoto")
Content-Type: text/plain; charset=US-ASCII

Hi all LXers and Linuxers

If you read japanese, check urls shown below

http://member.nifty.ne.jp/toyozou/palmpc/release.html
http://www.mobilenews.ne.jp/news/1999/11/0101pda.html

A Japanese user comunity is building new PDA, which has
   GPLed hardware Design
   same form factor as HP1200lx and same KBD
   AMD elan (=486SX) 4-66MHz
   32MB Main memory
   CF Type II x 2
   CGA mono chrome(640x200) (Future plan will includes backlight)
   boot DOS or Linux from CF
   Work 10-20 h with 2 AA Battery
   May add hardware daughter board
   >= 80,000 yen

and freely join  into Development Group to bend spec. along with your tasete!
They plan to release it within Feb 2000.

ken

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 14:16:03 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Subject:      PE/PIM possible new features
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I finally got it! I am using PE/PIM to manage my todo lists for several
projects. It makes quite an impression while speaking with person X to
press Alt-G, X, Alt-N and ask him about the status of all his pending
actions...
The learing curve was quite steep, but now it eases my work
tremendously. Thanks Andreas!

The two new features that I would like to see are:

1. Here in Europe it is quite common to define milestones as weeks,
istead of dates (e.g. end of week 46, istead of November 19th).
Would it be possible/desireable to include the week number in the small
popup window that is called in PE by Fn-,?
The week number is defined by ISO 8601: week 1 is the one that contains
at least the first 4 days from January, if I recall well.
(see also http://www.cl.cam.ac.uk/~mgk25/iso-time.html)

2. Is it possible/desireable that PE/PIM can be configured to use ISO
standard date format (e.g. 1999-11-07)?

Paulo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 09:25:23 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              lloo@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <lloo@WORLDNET.ATT.NET>
Subject:      Re: US city database for World Time?

   >> I also needed a special version of the World Time program to
   >>handle  the larger number of cities (876).
Message-Id: <19991107142520.CBFH16149@12.72.154.254>
Date: Sun, 7 Nov 1999 14:25:20 +0000

   >What I'd like is a version that can handle all of the cities in the
   >US. <g>

Sounds like a job for that new Japanese 486 PalmPC.

At 876 cities, it takes WT about 15 seconds to load and start (even with
double-speed)... about the limit of my patience for any machine.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 09:52:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Nemeth <tnemeth@COMPUSERVE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Nemeth <tnemeth@COMPUSERVE.COM>
Subject:      Re: CP Pack (way boring sorry!)
Comments: To: Steve Carder <S_Carder@compuserve.com>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=ISO-8859-1

Longden, Neill, Steve:

1.  Thanks for your kind advice. However, I'm still unable to use this %=
#&
thing!  Some observations:
I have Cpack for my 200 which has three disks.  Neill mentioned he has on=
ly
one disk.  Longden suggested DOS copying the files
to my C drive and running it using app200.bat.  I did the same and but di=
d
not find the app200.bat file although I did end up with 29 files from the=

three disks.  Strike one.

2. I tried doing the DOS trick Steve mentioned by running it in DOS but
that did not work either.  Strike two.

3.   Actually, I drafted a far more computer literate from the office to
help me and together we could not solve this.  What happens is I keep
getting a msg which says there is not enough room in conventional memory
for the llra1/2/3 files.  The fix per the Cpack manual doesn't work eithe=
r.
 It suggests load it into high memory via the LH command. Strike three.

4.  Not to really bore you folks who don't have these problems, I was abl=
e
to use Transfile200 although slowing the speed down had no effect, I foun=
d
I had to shut down some programs that load automatically (ctrl alt del an=
d
end the task) and now that has ceased working.  And yes, I have tried to
retrace my steps and undo whatever I have done.

5.  Now to really embarass myself, I had purchased Palm Connect some year=
s
ago and it will not work either.  Naturally, there is no support for this=

little "gem" of a program either.  I'm the King of No Connection ...

Just shoot me!

tom, bewildered in muscat

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 10:03:00 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Nemeth <tnemeth@COMPUSERVE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Nemeth <tnemeth@COMPUSERVE.COM>
Subject:      greenwich printer plug
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=ISO-8859-1

Since I'm on a roll abusing myself, I thought why stop there?

I have a Greenwich instruments plug in printer adapter (not the cable typ=
e)
which does not work.  Yup, I changed the battery.  Is there some sort of
printer driver associated with this product?  I don't recall one but at o=
ne
time I could print but cannot no longer.

Through his good offices, Hal directed me at one time to a Greenwich boss=

who deigned not to reply to my queries.  Not a happy camper with Greenwic=
h
customer service.

Suggestions?  Advice?  Lamentations?

Cheers from the Sultanate of Oman
tom

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 22:37:42 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "R.S." <rogerswn@CTIMAIL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "R.S." <rogerswn@CTIMAIL.COM>
Subject:      Re: Program for screen capturing of XL
Comments: To: Daniel Hertrich <d.hertrich@GMX.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I used to capture the screen from my palmtop using CAPLX. It is very simple
to use, installed it to run at the backgroud, press alt + 3 to capture the
screen whenever you want to. And it is in PCX format.
You can find it on S.U.P.E.R. site

Roger S.


----- Original Message -----
From: Daniel Hertrich <d.hertrich@GMX.DE>
To: <HPLX-L@UCONNVM.UCONN.EDU>
Sent: Saturday, November 06, 1999 1:46 AM
Subject: Program for screen capturing of XL


> Hi friends,
>
> what's the program some of you used to generate the LX screen captures
> that one can see on SUPER?
>
> I tried several programs (grabber etc.) but I got GIFs (or other
> formats) that show the screen as it was if you used the program you
> captured on a 'real' PC monitor (e.g. inverted and not stretched to the
> LX's screen format). But I want to get GIFs (or whatever) that show the
> look of the LX's screen, even when displayed on a desktop PC!
>
> (Hope I could make understandable what I mean! ;-) )
>
> GTX
> daniel
>
> --
> -------------------------------------------------------
> Daniel Hertrich                       d.hertrich@gmx.de
> homepage:                        http://daniel.hplx.net
> telephone:                         +49 (0)177 795 55 49
> -------------------------------------------------------
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 08:53:58 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: Questioon about upgrading a 200LX
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<I've got a Korean HP200LX that I was thinking of upgrading. Any reason why
it wouldn't be a good candidate? >>

The upgrade will work just fine.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 10:22:29 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: Using 200LX as WWW browser
Comments: To: David Ball <dmb10@SWBELL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sun,  7 Nov 1999 09:59:22 -0500 (EST)

20h40m09s ago ...
On Sat,  6 Nov 1999, David Ball wrote:

> Since I'm going to be upgrading my 200LX soon, I was wondering exactly
> how *useful* the 200LX is for Web surfing via WWW-LX.  With a
> doublespeed unit, just how much serious work can one get done?
>
> If I can do some serious web-surfing for informational purposes (as
> opposed to graphical entertainment...

Hi David-

I've been using WWW/LX since it came out.  It works very well for
finding info on the web.  Inline graphics can be switched off for
speed.  It handles frames like Lynx does - it shows a list of frames on
the page, and links to your choice.  If used with LXPIC, it can show
inline jpg and gif graphics.  HV (the browser part) allows use of
multiple fonts.  You may have the occasional problem with some sites
that act like anything except M$IE or Netscape are from the stone age,
but this may be changed with the newest update of WWW/LX.  I have it,
but haven't tried any of the hostile sites lately.

BTW - I see you're using NetTamer 1.11   How do you like that release?
I haven't used this since 1.08 - when I switched to WWW/LX.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 00:21:03 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              ITSUMI ken-ichi <amt@ITSUMI.KEN.ORG>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         ITSUMI ken-ichi <amt@ITSUMI.KEN.ORG>
Subject:      PE/PIM wish list (Was  PE/PIM possible new features)
Comments: To: Paulo.Custodio@SNAFU.DE
In-Reply-To:  Paulo Custodio's message of "Sun, 7 Nov 1999 14:16:03 +0000"
              <382597B3.8C023463@snafu.de>
MIME-Version: 1.0 (generated by SEMI 1.10.1 - "Morimoto")
Content-Type: text/plain; charset=US-ASCII

In message "PE/PIM possible new features"
    on 99/11/07, Paulo Custodio <Paulo.Custodio@SNAFU.DE> writes:
>I finally got it! I am using PE/PIM to manage my todo lists for several
>projects. It makes quite an impression while speaking with person X to
>press Alt-G, X, Alt-N and ask him about the status of all his pending
>actions...
>The learing curve was quite steep, but now it eases my work
>tremendously. Thanks Andreas!
I also love it

>The two new features that I would like to see are:
(snip)
1. I would like to display kanji (and edit kanji)

2. enjoy same software on other platforms like linux boxes seemlessly.

3. I would like to see or modify code.

ken

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 08:17:04 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              smoore <smoore@EFFECTNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         smoore <smoore@EFFECTNET.COM>
Subject:      PCMCIA Disks Available!
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I  have (11) 20 Meg PCMCIA Flash Disks ATA Type II available. They are
in
excellent condition. They have only been used a  very few times on
testing a couple new prototype products at work. I sell (1) 20 Meg
PCMCIA disk for $35.00 plus $5.00 shipping and I sell (2) disks for
$65.00 plus $5.00 shipping. I accept Money Orders Only! and you can send

payment to my address at:

Scott Moore
20455 S.W. Kirkwood Street
Beaverton, Or 97006

I will email you back  the day I receive your payment and let you know
that your disks our on the way. I always send out next day unless I
receive your payment on a Saturday and then I will send them out on
Monday. Please email me and let me if you are interested and when you
are sending payment so I can hold your disks for you. The response has
been tremendous and the people I have worked with on this group have
been great.  Thanks alot!   Scott

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 09:19:07 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Morphy one

Sounds GREAT.
Will it support English and sell it at akihabara?
Can yu say where exactly?

TIA
Semper mobilis,
yor pal al :-) .............

>Hi all LXers and Linuxers
>If you read japanese, check urls shown below
>http://member.nifty.ne.jp/toyozou/palmpc/release.html
>http://www.mobilenews.ne.jp/news/1999/11/0101pda.html
>
>A Japanese user comunity is building new PDA, which has
>   GPLed hardware Design
>   same form factor as HP1200lx and same KBD
>   AMD elan (=486SX) 4-66MHz
>   32MB Main memory
>   CF Type II x 2
>   CGA mono chrome(640x200) (Future plan will includes backlight)
>   boot DOS or Linux from CF
>   Work 10-20 h with 2 AA Battery
>   May add hardware daughter board
>   >= 80,000 yen
>
>and freely join  into Development Group to bend spec. along with your
>tasete!  >They plan to release it within Feb 2000.
>
>ken
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 17:07:50 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      LX as remote control + connection to cell phones
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

> Would it possible to install the stronger IR from an old 95HP in the
> 200LX?

Exactly _this_ would solve the problem that Stefan, Andreas and myself
are working on:

Our problem is, as some of you may know, that the palmtop reveives
signals when the IR port is powered and if a cell phone lies near the
palmtop. These signals are caused by induced voltages in one of the IR
port ICs (induced by the electromagnetic field around the antenna of a
cell phone).

So it's difficult to make an IR connection work between the 100/200LX
and a cell phone that is online.

We tried to use aluminium and copper foils to prevent the
electronagnetic waves from getting into the palmtop, but this doesn't
work reliably.

As we know, the IR port of the 95 LX is stronger that the IR port of
the 100/200, and as we also know, the 95's IR port does _NOT_ receive
these signals when a cell phone is near.

So my guess is: HP designed the IR port of the 100/200LX more power
saving than the IR port of the 95 LX. This means: lower voltages and/or
currents are used in the new IR port, so the low voltages that are
induced by the cell phone's field have no effect in the 95's IR port,
but it has in the 100/200LX's port.

(If I say 'IR port' I don't mean only the IR LED, but also all the
electronics between the LED and the serial port UART, that's used by
both the IR and wired port.)

So it would really be nice if it was possible to remove the IR port
electronics from a HP95LX and mount it into a 100/200 LX. So we had no
problems with going online on the road via IR. (But we would have a
shorter battery life due to the higher power consumption of the 95LX's
IR port).

Thanks for comments! (Mack? ;-) )

daniel.


--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 17:07:57 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Fwd: HPLX-L Form Response: S25
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hij Gijs,

> Subscriber Comments: Do you have software for mij siemens S25  mobile.
> I would like to send information bij the infrared port.

Try Andreas Garzotto's "IR.ZIP" (you can find it on SUPER -
www.palmtop.net/super.html )!

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 17:07:55 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: mobile phone tapping, what about OGO700LX?
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

> I tried the ring program and it rings all over the place. I tried to
> move the phone around but it kept ringing up to 20-30cm away. So I
> guess the Hp700 is just as bad as the Hp 200 when it comes to rfi..

Why should it be better?
The cell phone is connected to the 700LX via a wired port (PCMCIA
card?), not via infrared, so the IR port isn't active when the cell
phone is active.

The bad signals are only received by the IR port electronics, not by
any other components (even the serial port UART doesn't receive it,
because then the signals had to be received also when the wired port is
active, and that's not the case).

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 18:18:44 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: Morphy one
In-Reply-To:  <m11kSZd-003qgZC@Anko.VolksWare.co.jp>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sun, 7 Nov 1999, ITSUMI ken-ichi wrote:

> A Japanese user comunity is building new PDA, which has
>    GPLed hardware Design
>    same form factor as HP1200lx and same KBD
>    AMD elan (=486SX) 4-66MHz
>    32MB Main memory
>    CF Type II x 2

Where will they fit the second card slot?

>    CGA mono chrome(640x200) (Future plan will includes backlight)

Still only CGA :-(

>    May add hardware daughter board

Sound card? :-)

>    >= 80,000 yen

Who much is this in American $$?


Other than that I think it looks good!



Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 11:47:12 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <swdowell@BELLSOUTH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <swdowell@BELLSOUTH.NET>
Subject:      Re: Morphy one
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Hal, Have these folks contacted you about being an American distributor for
this product?

Steve


> Hi all LXers and Linuxers
>
> If you read japanese, check urls shown below
>
> http://member.nifty.ne.jp/toyozou/palmpc/release.html
> http://www.mobilenews.ne.jp/news/1999/11/0101pda.html
> >

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 10:46:29 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Morphy one
In-Reply-To:  <Pine.HPX.4.20.9911071812560.7589-100000@ask.diku.dk>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sun, 7 Nov 1999, Laust Brock-Nannestad wrote:

> >    CGA mono chrome(640x200) (Future plan will includes backlight)
>
> Still only CGA :-(

The Elan SC400 has a CGA video controller built in.  EGA or VGA would be
nice, but would require an external video controller, costing lots of
board space and power, in addition to a new screen...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 10:39:55 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, bobv <bobv@SOS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         bobv <bobv@SOS.NET>
Subject:      Re: His Word / infobases
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Tom,

I would like be willing to help with beta testing if you need more.

Also, are you familiar with "Folio Views"?

I have a copy of the Bible in that format and find the most useful
function to be the ability to define "groups" and then assign/delete
specific texts to any (even multiple) group.

I create groups that I am studying or interested in. Any time that I run
across a text that fits one of those groups and that I want to save in
the group, I can.

When wanting to study a certain group, a search is done on that group,
and all related texts are displayed (even though they may have no
specific "word" relations.)

It seems that this function would be fairly easy to implement
(everything looks easy to an outsider) by creating a file for each group
and adding text pointers to that file whenever a text is added to the
group. A search would then allow choosing the group file, and displaying
the texts pointed to.

Folio views has become an almost defacto standard for infobases, being
used by many governmental agencies and corporations. If you then made
the ability to import a file, we could use your program for ANY
information (as has already been alluded to in previous posts). This
would allow a huge leverage of your time and effort.

Thanks,
Bob

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 11:37:06 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: His Word / infobases
In-Reply-To:  <3825C77B.F775D1B8@sos.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sun, 7 Nov 1999, bobv wrote:

> Also, are you familiar with "Folio Views"?
> <snip>
> Folio views has become an almost defacto standard for infobases, being
> used by many governmental agencies and corporations. If you then made
> the ability to import a file, we could use your program for ANY
> information (as has already been alluded to in previous posts). This
> would allow a huge leverage of your time and effort.

I've gotten lots of files in Views 2.1 format for the palmtop, since
discovering it with the free LXREF 200LX SDK which includes a runtime.  It
seems to have lots of general-purpose reference program ability as well,
so I've been in contact with the people who made it, but they're of no
help when it comes to the old DOS version.  No source code, no SDK to
customize it for the palmtop, no assistance.  Sure would be nice if the
file format could be decoded so we could make a palmtop-designed viewer,
especially since they told me that Views 2.1 isn't Y2K compatible.  I
haven't tested it or anything, but since we're almost there, I'm a bit
nervous and sure wish we could design a palmtop-friendly version, perhaps
combining some the nice features of HisWord (like zoom-mode recognition,
notes, bookmarks, etc.) with the ability to read Views files.  That would
be great for hypertext reference material of any sort.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 11:42:32 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Subject:      Newton keyboard with Word
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

>    >I'm having a patch of trouble getting it to work with Word 5.5
>    >though. It'll type along nicely (and while I have only a 1x unit,
>    >my typing was never fast anyway), but special characters--
>    >basically anything requiring the shift key-- cause the unit to lock
>    >up.  Lock up like hard reset lock up.  Wotta pain!  If someone
>    >knows which file to tap to allow Word to work more smoothly with
>    >the Newton keyboard driver, please let me know.

>--snip-- The problem with Work 5.5 might be that Word
>tries to intercept the keyboard itself, instead of going through the
>normal interrupt chain.  Also, the order of loading the TSR's matters
>more than you might think.


Can you recommend an order for the autoexec file?  Maxdos is the only
other non-factory TSR that's being loaded, but I'm not sure if you mean
that the Newton TSR should be loaded before, after, or in between others.

BTW, Word is working great from SysMgr now.  Thanks for the advice on
Maxdos.

Ain Vale
Portland, Oregon

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 11:50:39 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Subject:      Word on the palmtop
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

>From:    David Ball <dmb10@SWBELL.NET>
>
>Now that you've gotten MS Word 5.5 for DOS working on the 200LX, how
>well does it run?  Does this word processor rate higher in your opinion
>than say, Word Perfect 5.1?

>From:    David Sargeant <david@HPLX.NET>
>
>I used both, and Word 5.5 is definitely easier and more similar to
>Windows word processors than WP51, but I find WP51 faster and vastly more
>powerful.  It does have some annoying features, though, such as the
>non-standard highlighting (Alt-F4 instead of just holding down shift).


David & David:

I always used WordPerfect in the past, and found it to be perfectly
satisfactory after some time spent learning its quirks. However, Word is
what we use here at the office, and so I've spent a lot of time lately on
the Microsoft product. I think that either program will be sufficient for
all but the most maniacal of power users, and hey those people aren't
using palmtops for their word processing anyway.

The bottom line, though, if it's the truth you want, is that I am a
hopeless cheapskate and Word 5.5 for DOS is free on the web.  End of
story.


Ain Vale
Portland, Oregon

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 15:06:01 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Fwd: HPLX-L Form Response
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

--- begin of forwarded message ---

Date: Sat, 6 Nov 1999 19:39:22 -0500
From: z517603@income.com.sg (jason goh)

Subscriber Comments:   Hi!  Pse help.  My 200lx just crashed.  I think
my set suffer complete memory loss.  I've backup the phone & appt file
to my pc, but I'm not able to use any pc program to open the 2 file.
Pse advise.  Thanks.

--- end of forwarded message ---
*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 12:24:21 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Word on the palmtop
In-Reply-To:  <Pine.A41.4.10.9911071137180.53904-100000@rainbow.burnside.powells.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sun, 7 Nov 1999, Ain Vale wrote:

> I always used WordPerfect in the past, and found it to be perfectly
> satisfactory after some time spent learning its quirks. However, Word
> is what we use here at the office, and so I've spent a lot of time
> lately on the Microsoft product. I think that either program will be
> sufficient for all but the most maniacal of power users, and hey those
> people aren't using palmtops for their word processing anyway.

Hey, _I'm_ a maniacal power user and I use the palmtop for my word
processing.  <g>  One thing I like abou WP51 is the powerful macro
ability...

> The bottom line, though, if it's the truth you want, is that I am a
> hopeless cheapskate and Word 5.5 for DOS is free on the web.  End of
> story.

An excellent plus!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 12:19:47 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I hope you aren't confusing the IR LED (transmitting device) with the
receiving photodiode / phototransistor (receiver);  These 2 parts can
look quite identical sometimes (I will have a 200LX apart soon here, I
will see what I can see in there.)

Can you pass me the symptoms you get?  (I carry a cell phone, so clients
can reach me; same shirt, different pockets.  Sounds like this may
harass me soon.)

The circuitry attached to the photodiode would usually include a
variable gain amplifier and an "AGC" circuit, to help that cope with
differing IR signal strengths (the other IR device may be closer or
further away, and weak or strong);  either that amplifier or the AGC
could be picking up the cell phone signals, and that could be he source
of the problem (I'm not a cell phone expert, just know a little about
RF.)

I'd perhaps try adding a small Surface Mount inductor (choke) in series
with the photosensor, as 40 kHz is the usual IR modulation & cell phones
are up in the 800+ MHz range, a SMALL inductor should make a large
difference, I would think!  These can be small as .072" x .09" x .06"
tall, $1.50 cost or less.  Perhaps just a couple ferrite beads, on the
leads, at about 15 cents apiece?  Those can be tiny!)

Would it help anyone here, BTW, if I made a little unit to extend the
range of the 200LX's IR port?  I think that can be done, fairly easily.
Thinking of using the 10-pin serial port connector as a positioner for
the unit.  Also thinking of having the stronger signals enter/exit at
the rear of the 200LX, and maybe also having an AC adapter plugin in
this at the same time (could have a LOT of IR power if I did that <G>)
Anyone prefer right-side IR transcieve?  Most of my machines have IR on
the rear, I'm "used to" that.  (It's the pits to have to set one up,
then turn it 180 degrees & then set the next up, especially for
debugging - Diagnos.Exe is sure handy, lets you see what's happening
<G>)

  Mark

Stefan Peichl wrote:
>
> This is our present knowledge concerning the stray RF signals
> of mobile phones interfering with the palmtops IR port:
>
> -the problem occurs only, if the serial port is set up for IR.
>
> -the problem occurs only, if the IR serial channel is powered.
>
> -the receiving photo diode is not the problem. I soldered it
>  out of my palmtop, but the problem still existed.
>
> -the UART cannot be the problem, because otherwise the palmtop
>  would also receive stray signals, if setup for wired serial
>  channel, which is not the case.
>
> Putting these 4 symptoms together, in our opinion it is very
> likely, that some circuit between the receiving photo diode and
> the UART (excluding both) acts as a receiver for the stray
> signal.
>
> Because wired and IR channel are powered independently, and the
> problem only occurs, if IR is powered, the suspicious circuit
> must also be connected with the IR power supply.
>
> We still need help from someone with electronic knowledge to
> identify the 'receiver' in the palmtop. Helpful would be
> information about circuits which could act as receivers and
> circuits which cannot act as receivers.
>
> The answer to another question would possibly solve the problem
> as well: Why is the HP95LX immune against these stray signals?
> It has the same (bottom only) shielding as the HP200LX and is
> almost identical to the HP200LX concerning it's IR hardware.
>
> If this too OT for most of you, let's continue this discussion
> off list.
>
> Stefan
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 14:20:15 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: His Word / infobases
In-Reply-To:  <3825C77B.F775D1B8@sos.net>; from bobv@SOS.NET on Sun, Nov 07,
              1999 at 10:39:55AM -0800
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

> Also, are you familiar with "Folio Views"?
>
> Folio views has become an almost defacto standard for infobases, being
> used by many governmental agencies and corporations. If you then made
> the ability to import a file, we could use your program for ANY
> information (as has already been alluded to in previous posts). This
> would allow a huge leverage of your time and effort.

Yes, I've used it in the past for access to Federal Aviation Regulations (I
work for the FAA, and the company that previous provided electronic access to
the regulations used Folio Views).  I haven't used it in several years though.
Do you (or anyone else) know if their datafile format is documented anywhere?
Or, is it proprietary and only viewable with their reader?

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 12:48:06 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: Using LX as a remote control
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Darren Frick wrote:
>
> > -----Original Message-----
> >
> > Hello
> >
> > I seem to recall that the LX can be used as a remote control
> > although LED is
> > weak.
> >
> > Is there a way to increase the power of the LED?
> >
>
> Well, Radio Shack has a "High Output" IR LED. It's around here somewhere, I
> can find it and look for the Part #. I haven't had opportunity to put it in
> yet. I have had the case open on muy unit to do a double speed upgrade, and
> the LED looks like it would be easy to replace. Maybe I'll do it soon.
>
> Does anyone know ahead of ime if this LED would work better, even though
> there it would be driven by the same circuit?
>
> Darren.

I'd bet that the 200LX's IR power was decreased to save batteries, to
lengthen battery life further.

Looking from the outside, the black smaller unit is probably the IR
receiver, the larger clear unit the sender, at a guess here?  (Where IS
that T6 bit lost at?, grumble <G>  Think I'll just go buy another.)

The two parameters for IR LED power are current and voltage;  Most IR
LED's are set up to run at about 1.7V forward voltage, at 20 mA or so
maximum.  You put them across 5V (output by the control circuitry), with
a series resistor to drop the voltage across the LED, so as not to blow
it.  You also want the peak wavelength you send at, from the LED you
use, to be the same as the peak wavelength of sensitivity for the
receiver, for best function <G>

The usual ways you get stronger transmission for IR are:

* Shorten the distance;  light does that 1/R2 thing, twice the distance
means 1/4 the power.

* Use a more efficient LED.  Newer LED's are better than older ones, and
send more light out for the same power in;  Might be able to stick this
into the LX, as most IR LED's are similar (1.5-1.7V forward voltage,
20mA or so current limit.)  Solder carefully <G>

* Use a lens to focus the IR onto the receiver better.  Impractical,
methinks, for the 200LX <G>

* Use multiple LED's in parallel.  (Cannot do that without some kind of
driver, the 200LX's electronics probably wouldn't LIKE this, I'll
look.)  Easy to do on an external board.  Though, if we can pull the
current IR LED and stick a second LED in series with a smaller
replacement resistor, so you get twice the IR output for the same power
usage, might be able to fit this in the 200LX;  Where to put that LED,
hmmm,  Is it possible to stick 2 smaller LED's in the space of the one
larger LED, one smaller LED atop the other?  I wonder <G>  Probably
would just parallel 6 IR LED's on the external board I was thinking of
making, drive them all off 12V, that'd work pretty well to send harder
<G>

* Drive the LED with a higher voltage, if the circuitry in the LX allows
- replace the series resistor with another, smaller resistor, to drive
that LED harder.  Don't overdo this, or you melt the LED, which is
"bad".

* Drive the LED with a lot higher current, with a low duty cycle.  Some
"Light Radar" jammers use a set of several huge IR emitters, all in
series/parallel, driven off something like 9 or 12 volts, at several
AMPS apiece;  If your control circuitry fails, they melt.  So long as
the power's flipped on & off fast & repeatedly, you get an effective
huge power output, with not so much power usage.  This was what I
thought of doing for the external add-on board I may make.

  Mark

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 12:57:58 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: File transfer...
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Sat, 6 Nov 1999 09:39:11 -0500, Peniel Romanelli <peniel@WEB2000.NET> =
wrote:

> Hi Folks -
>
> We've had a lot of discussion of file transfer options (Transfile,
> Cpack, Kermit, etc) here.  Thought I'd mention that X-Finder can handle
> this very nicely with the installation of a small (11K) program on the
> desktop or laptop.


Hi All

I agree with Peniel!
X-Finder Server is a must have and fits on a floppy. (:-)

So coupled with your HP cable you can transfer to, from, print etc. on
any computer that a 9 pin serial.




Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 13:15:51 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: His Word / infobases
In-Reply-To:  <19991107142015.D19670@hisword.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sun, 7 Nov 1999, Tom Hoover wrote:

> Yes, I've used it in the past for access to Federal Aviation
> Regulations (I work for the FAA, and the company that previous
> provided electronic access to the regulations used Folio Views).  I
> haven't used it in several years though. Do you (or anyone else) know
> if their datafile format is documented anywhere? Or, is it proprietary
> and only viewable with their reader?

It's the latter, and they refused to give me any info about the file
format, stating it was "core technology."  Apparently the format is still
similar enough to 2.1 in the latest Windows versions that they don't want
to give it away, although that may change since the company who made Views
2.1 (Folio) has been acquired by new companies twice since I last spoke to
anybody there.  If anybody would care to help out with figuring out the
file format so we could do a palmtop reader, I've already done a little
bit of work on it, but haven't gotten very far.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 15:12:05 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: His Word / infobases
Comments: To: bobv <bobv@SOS.NET>
In-Reply-To:  <3825C77B.F775D1B8@sos.net>; from bobv@SOS.NET on Sun, Nov 07,
              1999 at 10:39:55AM -0800
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Sun, Nov 07, 1999 at 10:39:55AM -0800, bobv wrote:
>
> I create groups that I am studying or interested in. Any time that I run
> across a text that fits one of those groups and that I want to save in
> the group, I can.
>
> When wanting to study a certain group, a search is done on that group,
> and all related texts are displayed (even though they may have no
> specific "word" relations.)
>
> It seems that this function would be fairly easy to implement
> (everything looks easy to an outsider) by creating a file for each group
> and adding text pointers to that file whenever a text is added to the
> group. A search would then allow choosing the group file, and displaying
> the texts pointed to.

This feature will be available using the "Topics" function of HisWord v1.3.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 13:44:25 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: LX as remote control + connection to cell phones
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Daniel Hertrich wrote:
>
> Hi friends,
>
> > Would it possible to install the stronger IR from an old 95HP in the
> > 200LX?
>
> Exactly _this_ would solve the problem that Stefan, Andreas and myself
> are working on:
>
> Our problem is, as some of you may know, that the palmtop reveives
> signals when the IR port is powered and if a cell phone lies near the
> palmtop. These signals are caused by induced voltages in one of the IR
> port ICs (induced by the electromagnetic field around the antenna of a
> cell phone).
>
> So it's difficult to make an IR connection work between the 100/200LX
> and a cell phone that is online.
>
> We tried to use aluminium and copper foils to prevent the
> electronagnetic waves from getting into the palmtop, but this doesn't
> work reliably.
>
> As we know, the IR port of the 95 LX is stronger that the IR port of
> the 100/200, and as we also know, the 95's IR port does _NOT_ receive
> these signals when a cell phone is near.
>
> So my guess is: HP designed the IR port of the 100/200LX more power
> saving than the IR port of the 95 LX. This means: lower voltages and/or
> currents are used in the new IR port, so the low voltages that are
> induced by the cell phone's field have no effect in the 95's IR port,
> but it has in the 100/200LX's port.
>
> (If I say 'IR port' I don't mean only the IR LED, but also all the
> electronics between the LED and the serial port UART, that's used by
> both the IR and wired port.)
>
> So it would really be nice if it was possible to remove the IR port
> electronics from a HP95LX and mount it into a 100/200 LX. So we had no
> problems with going online on the road via IR. (But we would have a
> shorter battery life due to the higher power consumption of the 95LX's
> IR port).
>
> Thanks for comments! (Mack? ;-) )
>
> daniel.

Can you get some tiny ferrite beads & try those on the IR Receiver's
leads, instead of the metal foils, possibly?  Ferrite does a good job of
reducing RF, that's why you see it on power cords & so on all the time.
Really think it's the answer here;  If you guys want, I'll order 'em for
you <G>

  Mark

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 17:27:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: MS Word
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> <Grin>  Can you believe that WP 5.1 is the first word processor I ever =
used,
> and for some reason, Alt-F4 always seemed a "logical" way to highlight.
> <VBG>
>
> For most tasks, I still find WP 5.1 to be quite sufficient.  Ironic, =
eh?

The transcriptionists in our medical office all still use WP 5.1.  We =
recently
had a "scare" when someone tried to convince them that they should switch =
to
Word for Office97 because it is Y2K compliant.  I did some checking and =
WP 5.1
for DOS will work fine for our purposes after Jan 1st.  So, they will =
continue
to run WP 5.1 on "ancient" 486 computers for a long time to come <g>.

I know this isn't exactly palmtop related, but the basic concept of =
retaining a
proven technology that works rather than getting the "newest and best" is =
very
relevant.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 17:28:22 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Cavendishl@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Lynn M. Cavendish" <Cavendishl@AOL.COM>
Subject:      Re: HisWord
Comments: To: lists+hplx@hisword.net
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Tom,

OLB puts an indication on the screen if the current verse has a note.  Would
this feature be difficult to implement HisWord?

Thanks,

Lynn

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 07:29:31 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "KAZU(Kazuhisa Ta" <QWQ11433@NIFTY.NE.JP>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "KAZU(Kazuhisa Ta" <QWQ11433@NIFTY.NE.JP>
Subject:      Re: Morphy one

Hi all.
I know well about "Morphy one"(the name of new hardware)and this project.
And the member now prepare the english documentations.
Wait for a while.
I'll imform you when the document is released.
Bye.

------------------------------------
      KAZU (Kazuhisa Tanabe)
 Kyoto, Japan
 E-mail     QWQ11433@nifty.ne.jp
------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 15:27:12 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Subject:      new Japanese LX
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

>A Japanese user comunity is building new PDA, which has
>   GPLed hardware Design
>   same form factor as HP1200lx and same KBD
>   AMD elan (=486SX) 4-66MHz
>   32MB Main memory
>   CF Type II x 2
>   CGA mono chrome(640x200) (Future plan will includes backlight)
>   boot DOS or Linux from CF
>   Work 10-20 h with 2 AA Battery
>   May add hardware daughter board
>   >= 80,000 yen
>
>and freely join  into Development Group to bend spec. along with your
>tasete!
>They plan to release it within Feb 2000.


Wow!  This sounds great!!  Sure, the battery life is a bit low, but only
compared to the current LXs.  Still ultra-portable.  And cheap (~US$650 if
my math is right)!  Now if only they came in a machined aluminum case...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 20:53:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              lloo@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <lloo@WORLDNET.ATT.NET>
Subject:      Re: Fwd: HPLX-L Form Response
Comments: cc: z517603@income.com.sg

   >Subscriber Comments:   Hi!  Pse help.  My 200lx just crashed.  I
   >think my set suffer complete memory loss.  I've backup the phone &
   >appt file to my pc, but I'm not able to use any pc program to open
   >the 2 file. Pse advise.  Thanks.
Message-Id: <19991108015336.MMVF16149@12.72.154.166>
Date: Mon, 8 Nov 1999 01:53:36 +0000

Another good reason to have Cpack... to be able to read (and write) your
backed up LX files on the desktop.

By "crashed", it sounds like it's not working anymore, otherwise he'd just
copy those files back to the LX.

If that's the case, my only advice would be to get a replacement LX ASAP.

Of send the crashed unit in to someplace like Thaddeus ... (or whatever
they have in Singapore) and hope for a quick turnaround for repair.

If viewing the phone data is needed, he could load Palrun/DBView (from the
SUPER site) on the PC and look at the phone data (but not appt).

If he was short on cash, he could try asking someone on the list to run a
dump on his appt.adb file and send it back as a csv formatted file.

Without knowing more about his requirements, it's difficult to speculate on
alternative solutions.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 20:22:43 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Wanted: CF Adapter
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Does anyone have an extra CF adapter that they maight be willing to part
with? I need one. If anyone has an extra, please email me and let me know
what it would take for me to acquire it <g>.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 20:32:46 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: HisWord
Comments: To: Cavendishl@AOL.COM
In-Reply-To:  <0.61094966.25575706@aol.com>; from Cavendishl@AOL.COM on Sun,
              Nov 07, 1999 at 05:28:22PM -0500
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Sun, Nov 07, 1999 at 05:28:22PM -0500, Lynn M. Cavendish wrote:
> OLB puts an indication on the screen if the current verse has a note.  Would
> this feature be difficult to implement HisWord?

That, and paragraph marks, are planned for this version.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 22:02:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Wanted: CF Adapter
Comments: To: jeffj@SCOTT.NET
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Sun, 7 Nov 1999 20:22:43 -0600 Jeff Johns <jeffj@SCOTT.NET> writes:
> Does anyone have an extra CF adapter that they maight be willing to
part
> with? I need one. If anyone has an extra, please email me and let me
know
> what it would take for me to acquire it <g>.

Have you tried ebay?  I received my san disk pcmcia adapter last week.
I won it for $9.95 two weeks ago on ebay.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 22:09:44 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Brian.McIlvaine@UNBOUNDED.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Subject:      Display chips to vertical drivers...
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

It has been mentioned that missing vertical lines on the HPLX display can be
traced to bad connections to the IC's on the back of the display. I took my
machine apart to take a look, but do not want to try and touch up all the
connections to the many (15 or so) IC's, each with many connections. Does
anyone know how to relate a given pixel column with a particular pinout
location? If so, it would be much appreciated!

Brian

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 20:06:36 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Display chips to vertical drivers...
In-Reply-To:  <19991108030939.PLUS21848@worldnet.att.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sun, 7 Nov 1999, Brian McIlvaine wrote:

> It has been mentioned that missing vertical lines on the HPLX display
> can be traced to bad connections to the IC's on the back of the
> display. I took my machine apart to take a look, but do not want to
> try and touch up all the connections to the many (15 or so) IC's, each
> with many connections. Does anyone know how to relate a given pixel
> column with a particular pinout location? If so, it would be much
> appreciated!

I don't think anybody does.  Even the pros follow this route: hook up the
screen, turn it on, and poke around until pressing one of the ICs fixes
the lines, then look for trouble around that area and fix it.  Of course,
you have to have some way of having the screen on while also having access
to the ICs...

Of course, if anybody does have that kind of info, please let us know!
That would be fantastic.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 21:19:36 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Wanted: CF Adapter
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Sun, 7 Nov 1999 22:02:27 -0500, d dv <ddvteach@JUNO.COM> wrote:

> Have you tried ebay?  I received my san disk pcmcia adapter last week.
> I won it for $9.95 two weeks ago on ebay.

Not yet, I figured I would start here first.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 22:22:00 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Brian.McIlvaine@UNBOUNDED.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Subject:      ccLXPOP - soliciting ideas for improvement
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

If anyone has ideas on what improvements could be made to ccMail, I am
interested in hearing them! Thanks

Brian

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 16:22:37 +1300
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, lodger@NZ1.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Roger Whitmarsh <lodger@NZ1.IBM.COM>
Subject:      Re: Wanted: CF Adapter
Comments: To: d dv <ddvteach@JUNO.COM>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

> Does anyone have an extra CF adapter that they maight be willing to
>part with? I need one. If anyone has an extra, please email me and
>let me know what it would take for me to acquire it <g>.

>>Have you tried ebay?  I received my san disk pcmcia adapter last week.
>>I won it for $9.95 two weeks ago on ebay.

Why bother - I've seen them as cheap as $7.95 at some of the net stores

Cheers, Roger

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 10:10:34 +0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rachmat Irfan <irfan@KSEI.CO.ID>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rachmat Irfan <irfan@KSEI.CO.ID>
Subject:      Re: ICE 200
Comments: To: Laust Brock-Nannestad <laustbn@DIKU.DK>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

I've downloaded from S.U.P.E.R a while ago and works great in my 200 lx
Just check the right path, and it will works

Irfan

        -----Original Message-----
        From:   Laust Brock-Nannestad SMTP:laustbn@DIKU.DK
        Sent:   07 Nopember 1999 07:14
        To:     HPLX-L@UCONNVM.UConn.Edu
        Subject:        Re: ICE 200

        On Sat, 6 Nov 1999, Matthew W. Sheffield wrote:

        > Does anyone know if there is an update of ICE100 that enables
it to work
        > with the 200LX?

        ice100.zip includes two versions, one for the 100LX and one for
the 200LX.
        Actually, I believe that the program was originally written for
the 200LX
        to make it display the icons from the 100LX.


        Cheers,

        Laust

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 20:19:31 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Wanted: CF Adapter
In-Reply-To:  <CA256823.00128EC9.00@d73mta03.au.ibm.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 8 Nov 1999, Roger Whitmarsh wrote:

> Why bother - I've seen them as cheap as $7.95 at some of the net
> stores

Looks like buycomp.com has genuine Sandisk adapters for $5.94.  And
they're in stock, meaning you probably won't go through a buy.com
back-order nightmare.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 22:37:37 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: ccLXPOP - soliciting ideas for improvement
Comments: To: Brian.McIlvaine@UNBOUNDED.COM
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Sun, 7 Nov 1999 22:22:00 -0500 Brian McIlvaine
<Brian.McIlvaine@UNBOUNDED.COM> writes:
> If anyone has ideas on what improvements could be made to ccMail, I
> am interested in hearing them! Thanks

I guess you meant improving ccLXPOP, not ccMail, or can a Rom program be
improved? That would be cool.  Your ccLXPOP is great the way it is.
ccMail, well that's another story.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 00:03:30 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Don E. Weatherly" <weather@EXIS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Don E. Weatherly" <weather@EXIS.NET>
Subject:      Re: Wanted: CF Adapter
In-Reply-To:  <199911080222.UAA01783x@scott.net>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

At 08:22 PM 11/7/99 -0600,  Jeff Johns <jeffj@SCOTT.NET> wrote:
>Does anyone have an extra CF adapter that they maight be willing to part
>with? I need one. If anyone has an extra, please email me and let me know
>what it would take for me to acquire it <g>.
>
>

Office Depot sells the Sandisk PCMCIA - Compact Flash adapter for about $13.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 21:45:07 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Wanted: CF Adapter

Jeff, Take it yu want a free one.
otherwise they cost $10 bucks or less from a CF vendor.

Semper mobilis,
yor pal al :-) .............

>Does anyone have an extra CF adapter that they maight be willing to
>part with? I need one. If anyone has an extra, please email me and let
me
>know >what it would take for me to acquire it <g>.
>
>Jeff
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 22:31:19 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Wanted: CF Adapter
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Sun, 7 Nov 1999 21:45:07 -0600, al chin <hobchi@JUNO.COM> wrote:

> Jeff, Take it yu want a free one.
> otherwise they cost $10 bucks or less from a CF vendor.

Nope, I would be willing to pay for it. I didn't realize they were that
cheap at Office Depot so I'll probably just pick one up there. I had =
checked
at CompUSA last night and they don't sell them without buying a card =
also.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 21:00:41 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, bobv <bobv@SOS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         bobv <bobv@SOS.NET>
Subject:      Re His Word / infobases
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

No, I don't know. What is worse, I have a very large one that just
corrupted.
Yes, the backup is also corrupt.

Bob
>Yes, I've used it in the past for access to Federal Aviation
Regulations (I
>work for the FAA, and the company that previous provided electronic
access to
>the regulations used Folio Views).  I haven't used it in several years
though.
>Do you (or anyone else) know if their datafile format is documented
anywhere?
>Or, is it proprietary and only viewable with their reader?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 00:55:52 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: FS: acCIS v4.0

>> I received acCIS v4.0 with the palmtop that I just bought.  Since I
haven't had
>> a CIS account in years, is anyone interested in purchasing it?  I
don't even
>> know if CIS still supports text-based logins.
>
>While there is little ascii stuff still on cis (old mail still exists if
>you did not want a pop3 account), ACCIS 4 works with both the ascii and
>newer HMI standard and still is CURRENT for cis forum and mail stuff.
>In other words, ACCIS 4 (FOUR) WORKS!!! (G)

I've thought about moving from AOL to CIS many times, but it was my
understanding that new customers are no longer given access to their
email and other areas of CIS from a HP200LX with a DOS interface.

If I were to move over to CIS from AOL today as a new CIS customer, would
I be able to access CIS from my desktop, as well as from my HP200LX with
acCIS v4.0?

If so, is that software still readily available?

Thanks in advance. :-)

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 07:41:38 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      Re: xtgold
Comments: To: ted@nicar.org
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

hi Ted

i'm getting over my flu
and you?

> to squeeze XTreeGold down by over 1MB!

i am only using the following files:

xtg.exe
xtgold.hst
xtgold.tog
xtg_azip.xtp
xtg_view.xtp
xtg_zip1.xtp
xtg_zip2.xtp
xtg_zip3.xtp

that is about 300k

could you tell me which file to add to get the "compare directories" feature
going? (key "c")

 regards from    __o     Nathalie
 avec LX       _(\<._    exercice
 en France    (_)/ (_)   ...petit tour du beau paysage

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 01:28:38 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: interlnk_intersvr
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Don E. Weatherly wrote:
>
> >William Schultz <revwkschultz@JUNO.COM> wrote:
> >A while back one of the intrepid members of this hallowed list mentioned
> >interlnk and intersvr as useful tools for connecting two computers
> >together.  If that esteemed member of this list is listening, or if
> >anyone else who understands the program is listening, I really need some
> >advice.
> >
> >Is there a way to get the program to recognize a CD ROM as a drive?
>
> =======
> I used Interlnk/Intersvr several years ago. I don't recall it NOT
> recognizing CD-ROM drives.
>
> Did you load your CD-ROM drivers in Config.sys before the line that loads
> Interlnk?
>
> If the problem is related to MSCDEX being loaded in Autoexec.bat after
> Interlnk is loaded in Config.sys, maybe someone else on the list is aware
> of a software solution.
>
> You might consider another file transfer program.  There are many.  I
> prefer Norton Commander.

Best page I know of, for InterLink & Interserver, is
http://www.kime.net/directcc/index.html - it tells you how to connect
any Dos / Win3.x / Win9x / WinNT3.51 / WinNT4.0 machine to any OTHER Dos
/ Win3.x / Win9x / WinNT3.51 / WinNT4.0 machine, using InterLink /
Interserver / Direct Cable Connection or RAS.

Do still have to load the CD drivers, are those working right?

  Mark

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 09:37:09 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      Scott !!! Discs !!! flash drivers for 100lx needed
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

the 20megs from Scott (Mr: !!!) arrived; they are made by  IDE
"international game technology" and refuse to  be read or formatted on my
backup 100lx

anyone know what driver they need from the 200lx? (if it's ACE3.sys, where
is it)

Scott wrote:
I am not sure about the 100LX hopefully someone on our group
can help you. I was I could give your more information but I do not own
that system...Thanks Alot!     Scott

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 08:13:52 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Would it help anyone here, BTW, if I made a little unit to extend the
> range of the 200LX's IR port?  I think that can be done, fairly easily.
> Thinking of using the 10-pin serial port connector as a positioner for
> the unit.

I would like this.  I used my 95LX as a universal remote a lot, but had =
to give
that up when I got a 100LX because the range was so limited.  By the time =
I got
close enough to use the IR, I was close enough to change the channel by =
hand!

How expensive would this gizmo be and about how big?  Are you thinking
something that just plugs onto the side of the palmtop, or something =
requiring
soldering?

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 08:13:50 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: CP Pack (way boring sorry!)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> 3.   Actually, I drafted a far more computer literate from the office =
to
> help me and together we could not solve this.  What happens is I keep
> getting a msg which says there is not enough room in conventional =
memory
> for the llra1/2/3 files.  The fix per the Cpack manual doesn't work =
either.

I don't have the 200LX CPACK (I use the one for the 100LX), so I am =
guessing
but...

What exactly do you run to start the whole thing up?  Is it a batch file? =
 If
so, please insert it into a reply for us to review.  What I think we need =
to do
is not try to load LapLink remote.  That sounds like the part of the =
process
that is not working.  This means you will still be able to use Filer on =
both
the palmtop and desktop to transfer files.

As an alternative to posting the startup file, try putting REM in front =
of each
line that refers to a LapLink file and try it again.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 08:14:56 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: Morphy one
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

I ran across the following URL that has some pretty good pictures of the
Morphy One. It has one picture in particular (at the bottom of the page)
that shows a size comparison of the Morphy One -vs- the 200LX.
http://www.page.sannet.ne.jp/t_nakagawa/mo1.htm
<http://www.page.sannet.ne.jp/t_nakagawa/mo1.htm>

Cheers,
Steve

        -----Original Message-----
        From:   ITSUMI ken-ichi SMTP:amt@ITSUMI.KEN.ORG
        Sent:   Sunday, November 07, 1999 5:42 AM
        To:     HPLX-L@UCONNVM.UConn.Edu
        Subject:        Morphy one

        Hi all LXers and Linuxers

        If you read japanese, check urls shown below

        http://member.nifty.ne.jp/toyozou/palmpc/release.html
        http://www.mobilenews.ne.jp/news/1999/11/0101pda.html

        A Japanese user comunity is building new PDA, which has
           GPLed hardware Design
           same form factor as HP1200lx and same KBD
           AMD elan (=486SX) 4-66MHz
           32MB Main memory
           CF Type II x 2
           CGA mono chrome(640x200) (Future plan will includes
backlight)
           boot DOS or Linux from CF
           Work 10-20 h with 2 AA Battery
           May add hardware daughter board
           >= 80,000 yen

        and freely join  into Development Group to bend spec. along with
your tasete!
        They plan to release it within Feb 2000.

        ken

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 11:35:02 -0300
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              LP <lprado@DYNAMO.COM.AR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         LP <lprado@DYNAMO.COM.AR>
Subject:      Cellular phone
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed

Hi,
        Anyone knows if it possible use the 200LX with a Ericsson KF788 phone ?

TIA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 09:34:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Nemeth <tnemeth@COMPUSERVE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Nemeth <tnemeth@COMPUSERVE.COM>
Subject:      cpack - data transfer - back up - and now X-Finder...
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=ISO-8859-1

Peniel, Quentin,    =


.. the siren song of X-Finder as a panacea for all my problems... i hear =
it
calling me...

ok you guys, i'll bite.  can you send this dope the dope on how to set th=
is
up properly?  i recall beaucoup
info and conflicting advice on how to do this.  maybe offline is better. =
 =

oh yeah, is this gonna be real painful or what?

tom, who is not the sultan of oman ....

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 07:45:43 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: MS Word
Comments: To: David Ball <dmb10@SWBELL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>Does this word processor rate higher in your opinion
>than say, Word Perfect 5.1?


Perhaps, as a personal opinion that's possible.
Compared with the possibilities and power, it can not
be better than WP51. The speed seems to be the same.
The plus of WP is e.g. the better print preview,
character sets, user-definable keyboards,
background-backups, a macro programming-language
(not only keystrokes!). You will have compatibility with
other products as:

PlanPerfect (spreadsheet, screenshot on www.goeldi.com/lx/ )
DataPerfect (database app, available on www.palmtop.net )
WP Office 4.x (has a programmable shell, calculator, simple database as the
lx-built-in, calendar)
LetterPerfect (WP lite)
Lotus 1-2-3

WordPerfect can load Lotus spreadsheets directly. It has long filenames
since 1991 (screenshot on www.goeldi.com/lx/ )! When you have problems in
printing very very very large docs, you can print them directly from disk.

There is an option, that is not already implemented for the LX: I had a
Sharp Laptop with an AT&T-compatible CGA screen. This CGA screen was able to
display 640x400! As you know, the CGA standard is 640x200. There was EGA
with 640x350. VGA is 640x480. So it was between EGA and VGA! I think, if
they could produce a non-standard screendriver like this, why should it not
be possible to get a textdriver for the LX zoom modes? Of course, the zoom
functions in WP. But what i'd like is a zoom in a way, that the menubar
stays on his position etc. (like the built-in and EXM apps or PE).

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 07:52:34 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: MS Word
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>I used both, and Word 5.5 is definitely easier and more similar to Windows
>word processors than WP51, but I find WP51 faster and vastly more
>powerful.  It does have some annoying features, though, such as the
>non-standard highlighting (Alt-F4 instead of just holding down shift).


As you can see, the only plus for word is another usability.
If you write a lot in Windows, and functions, power and speed is not as
important, Word and WP are the same. The highlighting in WP (Alt-F4)
was implemented at a time, other word processors hadn't this function
(Word 5.5 came out some years after WP51). WP51 was one of the
first apps with a SAA-like interface. If somebody gets used to the direct
keystrokes of WP (yes, you can reach a lot of functions with direct key-
strokes, that's especially important for a pc like the LX, where you don't
want to surf around in a lot of menues), she won't miss it.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 16:06:09 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Cristian Rigamonti <bigamons@FREEMAIL.IT>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Cristian Rigamonti <bigamons@FREEMAIL.IT>
Subject:      COM1's status changes automatically in DOS...
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

While using LXPro to monitor the status of the COM1 port, I've noticed that
the
port's status changes automatically every time I run a DOS program: sometimes,
when the port is ON, opening a DOS application causes it to turn OFF (no
way to
keep it ON using LXPro); other times, the problem is the opposite: the port is
OFF, but it goes ON as I start DOS (no way to keep it OFF with LXPro)!

It happens even with the DOS prompt from the Application Manager, and in this
case the SERCTL command has no influence on the port's status.

After some experimenting I noticed the following:

- The problem happens only after having switched to and from Filer or
Datacomm.
  If I don't use Filer or Datacomm, the problem doesn't arise.

- The problem doesn't arise (i.e. the port stays ON or OFF as I set it) when
  accessing a "pure" DOS prompt (i.e. after a "Terminate all" from the AppMan)

So it seems that the Filer and Datacomm applications cause some trouble
with the
ON/OFF management of the port. Please note that I don't have any TSR
running in
the background, other than LXPro.

Anyone can give an explanation? Maybe it's a problem of LXPro? How can I be
sure
to set the COM1 permanently OFF, in order to save energy?

Thank you all for reading!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 16:14:04 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Word on the palmtop
Comments: To: Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> ... Word 5.5 for DOS is free on the web.  End of
>story.


OK. That's an argument!

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 16:17:22 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: MS Word
Comments: To: S_Carder@COMPUSERVE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>I know this isn't exactly palmtop related, but the basic concept of
retaining a
>proven technology that works rather than getting the "newest and best" is
very
>relevant.


Best? MS Word? <gggg>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 09:25:28 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: COM1's status changes automatically in DOS...
Comments: To: Cristian Rigamonti <bigamons@FREEMAIL.IT>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Mon, 8 Nov 1999 16:06:09 +0100, Cristian Rigamonti <bigamons@FREEMAIL.I=
T> wrote:

> to set the COM1 permanently OFF, in order to save energy?

I use Buddy to lock the serial port. One of the other utilities such as
lxstat may be ale to accomplish this.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 09:56:08 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: Wanted: CF Adapter
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<Looks like buycomp.com has genuine Sandisk adapters for $5.94.  And
they're in stock, meaning you probably won't go through a buy.com
back-order nightmare.>>

FYI, our wholesale cost for adapter is $8.50 and suggested retail is $12

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 10:00:17 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: Morphy one
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"

<<Hal, Have these folks contacted you about being an American distributor
for
this product?>>

Not yet.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 17:07:01 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Geert van Wirdum <v.wirdum@HCCNET.NL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Geert van Wirdum <v.wirdum@HCCNET.NL>
Subject:      Re: CP Pack (way boring sorry!)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi Tom,

> I did the same and but did
> not find the app200.bat file although I did end up with 29 files from =
the
> three disks.  Strike one.

So, where did you store that file? I will attach a app200.bat to an
email to your individual email address.

> for the llra1/2/3 files.  The fix per the Cpack manual doesn't work =
either.
> It suggests load it into high memory via the LH command. Strike three.

The llra1/2/3 files are forr Laplink; you should better not use the
Laplink functions of CPack under any Windows version higher than 3. The
Filer functions do not need Laplink.

> I had to shut down some programs that load automatically (ctrl alt del =
and
> end the task) and now that has ceased working.

If you really want to use it, re-install Transfile. If that appears
impossible, I suppose you have a real problem in your whole software
configuration somewhere.

Geert.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 10:31:03 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: His Word / infobases
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<I'm a bit
nervous and sure wish we could design a palmtop-friendly version, perhaps
combining some the nice features of HisWord (like zoom-mode recognition,
notes, bookmarks, etc.) with the ability to read Views files.  That would
be great for hypertext reference material of any sort.>>

FYI we looked into using Folio Views for the CD Infobase. However, terms
were WAY too expensive.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 09:23:33 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: His Word / infobases
In-Reply-To:  <B0AB4DD57CD5D1118A230060975A10053468C9@mailhost.thaddeus.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 8 Nov 1999, Hal Goldstein wrote:

> FYI we looked into using Folio Views for the CD Infobase. However,
> terms were WAY too expensive.

Yep... the Windows versions are hideously expensive.  Yet another
advantage of DOS software.  <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 09:24:53 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      DOS version of QuickBooks?
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

I'm curious ... I run Quicken 8 on my palmtop to keep track of finances.
Does anybody know if Intuit ever made a DOS version of QuickBooks, with
its business-oriented accounting rather than Quicken's personal
accounting?  And, if so, will it run on the 200LX?  If not, are there
alternatives that will run on the 200LX?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 17:43:58 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Gijs van Heijst <heijst@VGVH.NL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Gijs van Heijst <heijst@VGVH.NL>
Subject:      Re: Questioon about upgrading a 200LX
Comments: To: Hal Goldstein <hal_goldstein@THADDEUS.COM>
In-Reply-To:  <B0AB4DD57CD5D1118A230060975A10053468BA@mailhost.thaddeus.c om>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Can you please put me out of your e-mail mailinglist.

Thanks

Gijs van Heijst

At 08:53 07/11/1999 -0600, you wrote:
><<I've got a Korean HP200LX that I was thinking of upgrading. Any reason why
>it wouldn't be a good candidate? >>
>
>The upgrade will work just fine.
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 17:44:14 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Gijs van Heijst <heijst@VGVH.NL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Gijs van Heijst <heijst@VGVH.NL>
Subject:      Re: greenwich printer plug
Comments: To: Tom Nemeth <tnemeth@COMPUSERVE.COM>
In-Reply-To:  <199911071003_MC2-8C16-374A@compuserve.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Can you please put me out of your e-mail mailinglist.

Thanks

Gijs van Heijst


At 10:03 07/11/1999 -0500, you wrote:
>Since I'm on a roll abusing myself, I thought why stop there?
>
>I have a Greenwich instruments plug in printer adapter (not the cable type)
>which does not work.  Yup, I changed the battery.  Is there some sort of
>printer driver associated with this product?  I don't recall one but at one
>time I could print but cannot no longer.
>
>Through his good offices, Hal directed me at one time to a Greenwich boss
>who deigned not to reply to my queries.  Not a happy camper with Greenwich
>customer service.
>
>Suggestions?  Advice?  Lamentations?
>
>Cheers from the Sultanate of Oman
>tom
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 17:44:23 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Gijs van Heijst <heijst@VGVH.NL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Gijs van Heijst <heijst@VGVH.NL>
Subject:      Re: Program for screen capturing of XL
Comments: To: "R.S." <rogerswn@CTIMAIL.COM>
In-Reply-To:  <013c01bf2929$249362a0$3e5553cb@c0003007>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Can you please put me out of your e-mail mailinglist.

Thanks

Gijs van Heijst


At 22:37 07/11/1999 +0900, you wrote:
>I used to capture the screen from my palmtop using CAPLX. It is very simple
>to use, installed it to run at the backgroud, press alt + 3 to capture the
>screen whenever you want to. And it is in PCX format.
>You can find it on S.U.P.E.R. site
>
>Roger S.
>
>
>----- Original Message -----
>From: Daniel Hertrich <d.hertrich@GMX.DE>
>To: <HPLX-L@UCONNVM.UCONN.EDU>
>Sent: Saturday, November 06, 1999 1:46 AM
>Subject: Program for screen capturing of XL
>
>
>> Hi friends,
>>
>> what's the program some of you used to generate the LX screen captures
>> that one can see on SUPER?
>>
>> I tried several programs (grabber etc.) but I got GIFs (or other
>> formats) that show the screen as it was if you used the program you
>> captured on a 'real' PC monitor (e.g. inverted and not stretched to the
>> LX's screen format). But I want to get GIFs (or whatever) that show the
>> look of the LX's screen, even when displayed on a desktop PC!
>>
>> (Hope I could make understandable what I mean! ;-) )
>>
>> GTX
>> daniel
>>
>> --
>> -------------------------------------------------------
>> Daniel Hertrich                       d.hertrich@gmx.de
>> homepage:                        http://daniel.hplx.net
>> telephone:                         +49 (0)177 795 55 49
>> -------------------------------------------------------
>>
>> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>>
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 11:02:39 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Program for screen capturing of XL
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Mon, 8 Nov 1999 17:44:23 +0100, Gijs van Heijst <heijst@VGVH.NL> =
wrote:

> Can you please put me out of your e-mail mailinglist.

Everyone stand clear! David is about to go bezerk on someone <g>.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 10:58:21 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: greenwich printer plug
Comments: To: Gijs van Heijst <heijst@VGVH.NL>
In-Reply-To:  <3.0.6.32.19991108174414.007f1100@zubin.vgvh.nl>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 8 Nov 1999, Gijs van Heijst wrote:

> Can you please put me out of your e-mail mailinglist.
>
> Thanks

Go to http://list.hplx.net and unsubscribe yourself.  That works much
faster than sending messages to the list itself asking to be removed.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 13:24:51 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: FS: acCIS v4.0
Comments: To: John J Vanderstel <j_vanderstel@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> If I were to move over to CIS from AOL today as a new CIS customer, would
> I be able to access CIS from my desktop, as well as from my HP200LX with
> acCIS v4.0?
>
> If so, is that software still readily available?

I do all my internet exchange with a HP200LX and CSi as ISP. Software is
available and very relyable.

However I use acCIS 4.0 only to access forums on CSi. I do e-mail with WWW/LX.

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 13:21:42 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: How quickly they forget...
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

But this weight includes a headset - the 95/100/200 LX does not...

Ken
khansen@njcc.com

-----Original Message-----
From: Bruce Martin <Bruce_Martin@MANULIFE.COM>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Friday, November 05, 1999 5:30 PM
Subject: How quickly they forget...


>Check out: <http://www.jp.ibm.com/esbu/E/wpc/index.html>.
>
>It's an announcement of an IBM Japan prototype wearable PC. Looks pretty
cool,
>but IBM spoils it at the last moment with the final line:
>
>"The total weight of the wearable PC, including main unit, controller,
headset,
>and connector cables, will be 449 g, making it by far the most lightweight
>personal computer ever."
>
>I guess all those 312 gram HP 95LXs, 100Xs, 200LXs and 1000CXs don't count,
huh?
>
>Bruce, Slightly Pissed Off in Toronto
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 10:35:15 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Requalifying members
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>> Can you please put me out of your e-mail mailinglist.

>Everyone stand clear! David is about to go bezerk on someone <g>.

Maybe Al should send out a "requalifying" test every 6-12 months to all members
(individually, not on the list).  Failure to reply or answer correctly results
in removal:

Question: How to you get removed from the HPLX-L mailing list?

a) Send "signoff HPLX-L" to LISTSERV@UCONNVM.UCONN.EDU
b) Follow the subscription instructions mentioned at the website shown on every
signature line from the list
c) Ask the question to Mr. David Sargeant
d) Don't answer this question
d) Any of the above

This would serve to remind members how to do this and also give a show of hands
as to who's still in and who's out so Al can cull the herd (just say "moo!")
<g>.

To save Al some work (tallying responses and non-responses), he could hand that
part over to David "the Knife" Sargeant.  Of course, there'll always be someone
who'll respond to the question with,  "please remove me from your list".

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 13:35:16 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: Cellular phone
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I am getting the AT&T Digital One Rate version LM788, and
am also curious - IR? Serial? Cellular cable?

Thanks,

Ken
khansen@njcc.com

-----Original Message-----
From: LP <lprado@DYNAMO.COM.AR>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Monday, November 08, 1999 9:36 AM
Subject: Cellular phone


>Hi,
>        Anyone knows if it possible use the 200LX with a Ericsson KF788
phone ?
>
>TIA
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 20:34:45 +0200
Reply-To:     Rian Maartens <maartens@iafrica.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rian Maartens <maartens@IAFRICA.COM>
Subject:      Re: We still need help
Comments: To: S_Carder@COMPUSERVE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Steve wrote

>> I used my 95LX as a universal remote a lot<<

My question; what software did you run on the 95LX in order to use it as a
universal remote?

Rian Maartens
Ps. This is my first email from Outlook Explorer to the list. Please let me
know if it has any of those irritating code stuff at the end.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 12:53:22 +0000
Reply-To:     ted@nicar.org
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
Comments:     Authenticated sender is <ted@nicar.org>
From:         Ted Peterson <ted@NICAR.ORG>
Organization: IRE/NICAR
Subject:      XtreeGold 3.0 compressed how-to
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Nathalie,
     Also, sometimes when Diet, LZexe, or PKlite compresses a file,
the executable won't work correctly as expected, and you'll have to
try one of the other two compressors.  It was trial and error to find
something that even worked (some XTPs wouldn't compress and some
needed named to COM first instead of EXE).  Where an executable was
compressable by more than one compressor and correctly ran, I chose
the best compression.
     I used XtreeGold's batch command (tag files then Ctrl-b) to
quickly copy all XTPs to both .EXE and .COM, and use PKLite, Diet, and
LXexe to compress all copies.  That's 6 permutations per XTP file.  It
was then trial and error to see what worked best.  On your HP palmtop,
you can also delete all video drivers except XTP_CGA.DRV to save more
space.  You can download LZexe and Diet from here:
http://webnews.altu.net.au/~stwood/dos.htm
  You can download PKLite from here:  http://www.pkware.com/shareware/
ftp://ftp.cdrom.com/.1/artpacks/programs/dos/archivers/pklts201.exe

!! XTG 3.0 COMPRESSED (HERE'S MY FILE LISTING) - SAVES OVER 1 MEG!!
To save lines, .drv, .pif, .ini, .icn, .cfg, & .hst files are not
included in this listing, but are included in byte total.
      Path: D:\XTG  117 tagged files using 2,115,790 bytes
            JFC     .EXE   21,077 .a..  8-07-93  9:22:08 am
            XTG     .COM      954 .a..  8-26-93 10:25:50 am
            XTG     .EXE   66,657 .a..  2-26-94 11:59:56 pm
            XTGOLD  .COM    1,296 .a..  8-07-93 12:53:40 pm
            XTGOLD  .TOG       70 .a..  2-27-94 12:00:02 am
            XTGOLDF .PIF      545 .a..  8-09-93 11:34:52 am
            XTG_AZIP.XTP    9,720 .a..  2-26-94 12:38:10 pm
            XTG_CFG .EXE   21,975 .a..  8-07-93  1:03:44 pm
            XTG_EDIT.XTP   16,240 .a..  2-26-94 11:30:48 pm
            XTG_FIND.XTP    5,910 .a..  2-26-94 12:38:14 pm
            XTG_FORM.XTP    8,971 .a..  8-07-93 12:53:50 pm
            XTG_GBMP.XTP   10,503 .a..  2-26-94 12:38:20 pm
            XTG_GDRV.XTP      811 .a..  2-26-94 12:31:08 pm
            XTG_GDWG.EXE  130,814 .a..  1-15-93  2:53:54 pm
            XTG_GGIF.XTP   11,961 .a..  2-26-94 12:38:30 pm
            XTG_GICO.XTP   10,452 .a..  2-26-94 12:38:36 pm
            XTG_GIMG.XTP   10,290 .a..  2-26-94 12:38:42 pm
            XTG_GLBM.XTP   11,336 .a..  2-26-94 12:38:48 pm
            XTG_GMAC.XTP   10,146 .a..  2-26-94 12:38:54 pm
            XTG_GMSP.XTP   10,130 .a..  2-26-94 12:39:00 pm
            XTG_GPCX.XTP   10,422 .a..  2-26-94 12:39:06 pm
            XTG_GPIC.XTP   10,781 .a..  2-26-94 12:39:12 pm
            XTG_GTIF.XTP   11,808 .a..  2-26-94 12:39:18 pm
            XTG_GWPG.XTP   10,914 .a..  2-26-94 12:39:24 pm
            XTG_HELP.PD0    3,435 .a..  2-28-94 12:47:54 pm
            XTG_HELP.X10   14,501 .a..  8-07-93 12:46:54 pm
            XTG_HELP.X20   15,459 .a..  8-07-93 12:46:52 pm
            XTG_HELP.X30   14,749 .a..  8-07-93 12:46:50 pm
            XTG_HELP.X40   14,755 .a..  8-07-93 12:46:50 pm
            XTG_HELP.X50   15,387 .a..  8-07-93 12:46:48 pm
            XTG_HELP.X60   14,386 .a..  8-07-93 12:46:46 pm
            XTG_HELP.X70   14,946 .a..  8-07-93 12:46:44 pm
            XTG_HELP.X80   14,087 .a..  8-07-93 12:46:44 pm
            XTG_HELP.X90   14,814 .a..  8-07-93 12:46:42 pm
            XTG_HELP.XA0   15,111 .a..  8-07-93 12:46:42 pm
            XTG_HELP.XB0   15,219 .a..  8-07-93 12:46:40 pm
            XTG_HELP.XC0   14,675 .a..  8-07-93 12:46:38 pm
            XTG_HELP.XD0   13,930 .a..  8-07-93 12:46:38 pm
            XTG_HELP.XE0    8,284 .a..  8-07-93 12:46:36 pm
            XTG_HELP.XTP    4,277 .a..  8-07-93 12:52:36 pm
            XTG_HEXX.XTP   10,885 .a..  2-26-94 12:39:28 pm
            XTG_MENU.DAT    2,553 .a..  2-26-94  6:42:24 pm
            XTG_MENU.XTP   24,809 .a..  2-26-94 12:39:38 pm
            XTG_MOVE.XTP    3,724 .a..  8-07-93 12:53:54 pm
            XTG_OOPS.XTP   18,423 .a..  2-26-94 12:39:46 pm
            XTG_VAMI.XTP   31,758 .a..  1-26-93  3:51:28 pm
            XTG_VDBF.XTP   39,277 .a..  8-07-93 12:55:38 pm
            XTG_VFFT.XTP   18,821 .a..  4-15-93 12:34:24 pm
            XTG_VFRM.XTP   20,258 .a..  4-16-93 10:26:54 am
            XTG_VIBM.XTP   17,402 .a.. 12-22-92  1:59:56 pm
            XTG_VIEW.XTP   33,714 .a..  8-07-93 12:54:56 pm
            XTG_VMSR.XTP   43,162 .a..  7-19-93  5:08:30 pm
            XTG_VOFF.XTP   20,785 .a..  7-01-93  6:53:52 pm
            XTG_VPDX.XTP   45,515 .a..  8-07-93 12:56:30 pm
            XTG_VPFS.XTP   23,684 .a.. 12-19-92  8:04:02 pm
            XTG_VRAP.XTP   17,739 .a..  4-15-93 11:58:56 am
            XTG_VSAM.XTP   19,778 .a..  4-28-93  3:19:48 pm
            XTG_VVK2.XTP   14,286 .a.. 12-19-92  8:04:22 pm
            XTG_VVK3.XTP   23,513 .a..  1-15-93  3:54:02 pm
            XTG_VWFW.XTP   43,696 .a..  8-02-93  7:39:48 am
            XTG_VWKE.XTP   46,530 .a..  8-07-93 12:58:50 pm
            XTG_VWKS.XTP   54,017 .a..  8-07-93 12:57:44 pm
            XTG_VWM4.XTP   41,090 .a..  1-28-93 12:20:58 pm
            XTG_VWOR.XTP   22,057 .a..  1-15-93  2:34:02 pm
            XTG_VWP1.XTP   21,547 .a..  7-02-93 11:35:42 am
            XTG_VWP2.XTP   26,647 .a..  4-15-93  2:27:54 pm
            XTG_VWP4.XTP   18,972 .a..  5-27-93 11:51:48 am
            XTG_VWP5.XTP   35,559 .a..  7-07-93  3:12:36 pm
            XTG_VWP6.XTP   24,075 .a..  7-29-93  3:58:20 pm
            XTG_VWS2.XTP   21,328 .a..  1-02-93  2:49:58 pm
            XTG_VWWR.XTP   28,501 .a..  7-22-93  2:39:50 pm
            XTG_V_DC.XTP   29,444 .a..  2-01-93  2:04:46 pm
            XTG_V_EN.XTP   18,801 .a.. 12-19-92  8:06:24 pm
            XTG_V_LM.XTP   34,220 .a.. 12-19-92  8:05:58 pm
            XTG_V_MM.XTP   20,073 .a..  1-02-93  1:35:58 pm
            XTG_V_MW.XTP   25,617 .a..  1-13-93  5:38:54 pm
            XTG_V_QA.XTP   17,684 .a.. 12-19-92  8:05:48 pm
            XTG_V_TO.XTP   24,308 .a..  4-15-93  1:20:02 pm
            XTG_V_WS.XTP   38,585 .a..  7-22-93  2:20:46 pm
            XTG_V_XY.XTP   33,880 .a..  4-28-93 10:12:16 am
            XTG_WASH.XTP    5,914 .a..  2-26-94 12:46:32 pm
            XTG_WBAT.XTP    6,211 .a..  2-26-94 12:46:36 pm
            XTG_ZIP1.XTP   26,550 .a..  8-10-93  1:14:42 am
            XTG_ZIP2.XTP   47,413 .a..  8-07-93  1:07:36 pm
            XTG_ZIP3.XTP   15,349 .a..  8-07-93 12:58:58 pm
            XTLINK  .COM   17,972 .a..  2-12-93 10:19:04 am
            ZX      .EXE   63,473 .a..  8-07-93  9:25:38 am

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 5 Nov 1999 20:58:44 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Donald Collins <dcollins@MCSWEB1.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Donald Collins <dcollins@MCSWEB1.COM>
Subject:      PE & NG
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Is there a way to get Norton Guides to work with PE?
All I get are beeps.

Don

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 18:50:13 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              b.newins@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Newins <b.newins@WORLDNET.ATT.NET>
Subject:      Re: greenwich printer plug
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Tom,

Check a couple of things.  Make sure everything is set to
9600 baud.  And make sure the serial port is on.  Things like
Buddy and/or TSR's can effect the serial port.  =Bob=

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 20:21:17 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: mobile phone tapping, what about OGO700LX?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 7 Nov 1999 09:21:20 -0800, Daniel Hertrich <d.hertrich@GMX.DE> wrote:

> Hi friends,
>
> > I tried the ring program and it rings all over the place. I tried to
> > move the phone around but it kept ringing up to 20-30cm away. So I
> > guess the Hp700 is just as bad as the Hp 200 when it comes to rfi..
>
> Why should it be better?

I performed the test to see if the Hp700 was better shielded. The tests
I performed showed that the Hp 700 is just as bad as the Hp200.

I guess the orginal thought was that since the Hp700lx where built to
dock with a cellular the shielding was better. But that is not the
case.

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 02:28:55 -0500
Reply-To:     Nicholas Chan <ncknight@pacific.net.sg>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nicholas Chan <ncknight@PACIFIC.NET.SG>
Subject:      IRC/LX development?
In-Reply-To:  <199911070403.MAA16593@spade.pacific.net.sg>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

I was just wondering that there was an announcement  from D&A about a beta testing of
this program. But so far, there has been silence about it's development. Can someone
tell me how is it coming along so far?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 7 Nov 1999 22:13:25 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Subject:      Re: PE/PIM possible new features
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Andreas Garzotto wrote:
> BTW, do you know anybody who actually uses the ISO format? I have never
> seen it in "reality".

We use it daily at work. All our dates are written as 1999-11-07.

Paulo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 14:40:08 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: PE/PIM possible new features
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Sun, 7 Nov 1999 22:13:25 +0000, Paulo Custodio <Paulo.Custodio@SNAFU.DE=
> wrote:

> We use it daily at work. All our dates are written as 1999-11-07.

The Sheriff's Department I work for also uses it for certain items :)

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 21:57:45 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I was able to isolate the IR-mobile problem a little further.

First some short theory from the SDK:

> The infrared receiver uses a photo diode to detect the
> incoming IR light. The light pulse is transformed into a CMOS
> level digital pulse by the IR receiver. The IR format decoder
> then generates the appropriate serial bit stream which is sent
> to the UART.

The IR port may be programmed in a way, so that an incoming
light pulse to the IR receiver generates an interrupt, telling
the interrupt owner that a digital pulse has occurred. This
IR mode of operation is completely different from the IR's
usual UART mode of operation where you have no access to
individual pulses.

I wrote a little test program which proved, that this interrupt
is caused by a mobile phone, even if the photo diode is
disconnected from the palmtop. Hence the mobile 'simulates'
a light pulse within the IR receiver.

This unfortunately means: there will never be a software
solution of this problem.

If shielding doesn't solve the problem either, another
possibility could be to attach a second IR hardware to the
wired serial port, which is not sensitive to EM interference.

Thaddeus offers the Aegis IR-HP5 receiver/transmitter for
the serial port of a desktop. I wonder if it also works if it
is connected to the serial port of the palmtop.

Could anyone owning the IR-HP5 could test that?

The IR-HP5 looks smaller than any other serial IR device I saw.

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 15:01:49 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Feher Tamas <etomcat@EGON.GYALOGLO.HU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Feher Tamas <etomcat@EGON.GYALOGLO.HU>
Subject:      Re: Aracahne as web-browser for HPLX Hello all,

I see Arachne as the alternative LX browser surfaces again.
Well, there are two problems with Arachne (which BTW works
with any old desktop PC, be it XT or 286, CGA or Hercules).

It uses a rather stupid way to display inline pictures: all GIF,
JPEG, etc. are first converted by an external application to BMP
format and then output to screen. This means added CPU cycles
and disk space requirements. In contrast, HV uses LxPic directly.

There are a few benefits of Arachne's solution. It allows using
a large-memory command-line image format converter, which works
from/to picture files. Thus progressive JPEG and interlaced GIF
processing are no problem, they are converted to BMP.

But shortcomings are numerous: disk access on XT/286 machines is
slow and double processing involves unnecessary CPU load.

I have talked to XChaos developer about a year ago, to consider
using a different layout for 286/XT optimized version: a dual
method based partly on LxPic. Every file format, which is adequ-
ately (full-quality display) supported by LxPic would be put to
screen directly; while other file formats (progr. JPG, intl. GIF,
TIFF, PNG) remain to be converted by the recent external engine.
Considering that still most of Net graphics are plain JPG/Gif,
which are OK for LxPic; speed advantage could amount to 30-35%.

Reply was, that he can only use such applications for Arachne
modules, which are provided with full source code. Now he has
his own 100LX and he is interested in the 4-grayshade mode; so
I think Stefan should at least document and release the infor-
mation relating to implementation of that mode in LxPic v6.2.

There is one other thing badly needed in Arachne: multitasking
stack/socket. Any web-browser running on pre-386 machines is
badly plagued by single-thread sock. When you use Netscape/IE
on desktop, you can see that several pictures are downloaded
and displayed simultaneously. This tremendously speeds up your
connection, as downloading one object usually can't fill up the
available bandwith, not even on a 14.4k modem.

I see, it is very hard to write safe (stable) multi-tasking
stack for a real-mode DOS browser; because there is no special
hardware in CPU to rely on. Maybe DOS itself is not suitable at
all for this. But without this feature XT/286 DOS browsers will
always be at an added speed penalty.

Arachne is a fine product, but finally it may prove that there
is something wrong with its design. It already consumes too much
low ram. I don't know if it will be real alternative to WWW/LX.

     Sincerely: Tamas Feher.

____________________________________________________________
EGON - az ingyenes levelezorendszer  http://egon.gyaloglo.hu

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 14:30:50 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: Off-topic: Top metrication advocates in USA?
Comments: To: Longden Loo <LLoo@WORLDNET.ATT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Oh, have they got you fooled - now the US Gov't has a space
probe that no one is tracking, it is free to perform whatever
underhanded activities without suffering public scrutiny.

And I bet you think we went to the moon, that Roswell, NM
is just a tourist site and Area 51 is just where the gov't builds
the next generation of Cargo Jets! ;)

Ken
khansen@njcc.com

-----Original Message-----
From: Longden Loo <LLoo@WORLDNET.ATT.NET>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Friday, November 05, 1999 9:08 PM
Subject: Re: Off-topic: Top metrication advocates in USA?


>Actually, the metric issue was just a smokescreen to conceal the fact that
>Americans just like things that to go BOOM!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 15:20:16 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: OT:Fluffiness...
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Well, as an owner of: 2xHP OmniBook 800ct, HP 100LX, HP200LX,
IBM PC110, and a Toshiba L50 and L110 machine I can understand
where you are coming from. In work, I use an IBM TP570 (14.1"
screen that can be "halved," leaving the floppy/cd-rom on your desk
when you travel) as well.

I think a lot of what you are seeing is the *existing* HP LX community
"doubling-down" on their bet on the 100/200LX platform, but your
perspective (as a vendor) is different from mine (as a customer).

Ken
khansen@njcc.com

-----Original Message-----
From: A Meshar <sponsor@FTEL.NET>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Saturday, November 06, 1999 11:37 AM
Subject: Re: OT:Fluffiness...


>> We need new members to remain "on topic."
>
>Agree with on topic. I find the growth to be opposite to your
>experience. Since the HP announcement, there was a raft of new
>products, add-ons, programs, and development of hardware. The
>sales in my business have taken a jump up, too. Not gigantic,
>but significant, and it seems to hold at the new level now for
>about three months. Maybe it tells that people finally decided
>to rope themselves in with the 200LX and do not have a reason
>to believe anything new (and worthwhile) will come out of HP
>in the DOS-compatible computer arena.
>
>I also note the demise of Libretto as possibly part of it.
>
>Personally, I have taken also my own PC 110 out of mothballs
>and have been working on putting it together as a "travelling"
>back up machine to my palmtops. I have used so far the OB
>800CT (a great machine!) and if the IBM can do the stuff I
>need, I will smaller stuff to carry while travelling.
>
>It seems to me that the handheld "serious" _mobile_ computing
>(which excludes in my mind almost all the WinCE line) is
>becoming incredibly interesting to people. This is probably
>fed by people being fed-up with WinCE, by advances in mobile
>telephony, and the real growing need to have computing on the
>go, pervasive, everywhere, all the time.
>
>Best regards,
>
>  Avi
>
>The above is my own private opinion.
>For official D&A Software response,
>please write to:  support@dasoft.com
>and check FAQs at http://www.dasoft.com
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 15:13:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: PCMCIA Tuner?
Comments: To: Chris Lott <rclott@MAIL.HIWAAY.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

And you plan to listen/watch the output how???

TV Tuner cards usually need zoomed video slot, IIRC.

Ken
khansen@njcc.com

-----Original Message-----
From: Chris Lott <rclott@MAIL.HIWAAY.NET>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Saturday, November 06, 1999 9:06 AM
Subject: PCMCIA Tuner?


>I've seen various ISA and PCI cards for sale that contain complete
>television and/or radio tuners for use in your desktop PC.  Has
>anyone seen a PCMCIA version of such a device?  And then the next
>question would follow... any way to use one on a DOS 100LX?  I'm
>not too worried about current draw, as I can use it with my Double
>Slot if the power consumption is excessive.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 09:02:57 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, qman@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Quinton Jones, Jr." <qman@EARTHLINK.NET>
Subject:      Re: ccLXPOP - soliciting ideas for improvement
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM> wrote:

If anyone has ideas on what improvements could be made to ccMail, I am
interested in hearing them! Thanks


    ----- Reply Separator -----



Hi Brian & All,

Since you ask! (:-)


1. integrated message filtering
2. download headers only


HTH



Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

ccLXPOP - a cc:Mail conversion tool Version 1.05

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 13:53:55 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

(received on the list server, answering through the mailing list <G>)

Steve Carder wrote:
>
> > Would it help anyone here, BTW, if I made a little unit to extend the
> > range of the 200LX's IR port?  I think that can be done, fairly easily.
> > Thinking of using the 10-pin serial port connector as a positioner for
> > the unit.
>
> I would like this.  I used my 95LX as a universal remote a lot, but had to give
> that up when I got a 100LX because the range was so limited.  By the time I got
> close enough to use the IR, I was close enough to change the channel by hand!
>
> How expensive would this gizmo be and about how big?  Are you thinking
> something that just plugs onto the side of the palmtop, or something requiring
> soldering?
>
> Steve Carder

I'm thinking it would be ~ $25 USD, US shipping included, shipped from
here;  I'll try to keep it less than that.  I haven't started yet, costs
would be $10 - $15 or more for parts, roughly, then something for a
printed circuit board, and perhaps something for a nice neat case;  I'm
thinking of making this about the size of a "Car alarm" keyfob, that'd
be a nice case to use for this.  Might just encapsulate this & do
without the case / PC board, first I need to see if my idea is workable
on some perfboard <G>

It'd be nice to make something for my manufacturing time if I make a
bunch of these, I don't know how many want this, so maybe just do it
"freeware" and let others build it for themselves?

I've been thinking, too;  it'd be possible to do this so it pretended it
was a wired serial cable, using that same connector, I will look into
that.  I tend to stay pretty busy, so it won't be today <G>

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 13:51:24 -0800
Reply-To:     patrickwest@uswest.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: His Word / infobases
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> > Also, are you familiar with "Folio Views"?

I use a couple of Folio Views items on my Palmtop. Version 2.x for DOS
runds fine.
I have a Double speeded 200lx my daughter uses a single speed 100lx and
it runs fine on her machine.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 17:01:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Michael Hooks <MHooks@GWMAIL.VALENCIA.CC.FL.US>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Michael Hooks <MHooks@GWMAIL.VALENCIA.CC.FL.US>
Subject:      Re: We still need help
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII

My mechanical skills are limited, so I would prefer to purchase a unit
to extend the range of my 200LX IR port.

>>> Mark Willis <mwillis@FOXINTERNET.NET> 11/08/99 04:53PM >>>
(received on the list server, answering through the mailing list <G>)

Steve Carder wrote:
>
> > Would it help anyone here, BTW, if I made a little unit to extend
the
> > range of the 200LX's IR port?  I think that can be done, fairly
easily.
> > Thinking of using the 10-pin serial port connector as a positioner
for
> > the unit.
>
> I would like this.  I used my 95LX as a universal remote a lot, but
had to give
> that up when I got a 100LX because the range was so limited.  By the
time I got
> close enough to use the IR, I was close enough to change the channel
by hand!
>
> How expensive would this gizmo be and about how big?  Are you
thinking
> something that just plugs onto the side of the palmtop, or something
requiring
> soldering?
>
> Steve Carder

I'm thinking it would be ~ $25 USD, US shipping included, shipped from
here;  I'll try to keep it less than that.  I haven't started yet,
costs
would be $10 - $15 or more for parts, roughly, then something for a
printed circuit board, and perhaps something for a nice neat case;
I'm
thinking of making this about the size of a "Car alarm" keyfob, that'd
be a nice case to use for this.  Might just encapsulate this & do
without the case / PC board, first I need to see if my idea is
workable
on some perfboard <G>

It'd be nice to make something for my manufacturing time if I make a
bunch of these, I don't know how many want this, so maybe just do it
"freeware" and let others build it for themselves?

I've been thinking, too;  it'd be possible to do this so it pretended
it
was a wired serial cable, using that same connector, I will look into
that.  I tend to stay pretty busy, so it won't be today <G>

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 13:56:49 -0800
Reply-To:     patrickwest@uswest.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: His Word / infobases
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

David Sargeant wrote:
>  If anybody would care to help out with figuring out the
> file format so we could do a palmtop reader, I've already done a little
> bit of work on it, but haven't gotten very far.

David,

The dos version runs fine on my palmtop.  You can grab a test file at
http://skyscraper.fortunecity.com/monitor/813/folio.zip

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 14:03:18 -0800
Reply-To:     patrickwest@uswest.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: DOS version of QuickBooks?
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

David Sargeant wrote:
>
> I'm curious ... I run Quicken 8 on my palmtop to keep track of finances.
> Does anybody know if Intuit ever made a DOS version of QuickBooks, with
> its business-oriented accounting rather than Quicken's personal
> accounting?
There was a DOS version of Quickbooks but I have not tried it on the
palmtop.


And, if so, will it run on the 200LX?  If not, are there
> alternatives that will run on the 200LX?
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 14:06:00 -0800
Reply-To:     patrickwest@uswest.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: His Word / infobases
Comments: To: Hal Goldstein <hal_goldstein@THADDEUS.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> <<I'm a bit
> nervous and sure wish we could design a palmtop-friendly version, perhaps
> combining some the nice features of HisWord (like zoom-mode recognition,
> notes, bookmarks, etc.) with the ability to read Views files.  That would
> be great for hypertext reference material of any sort.>>
>

The Resize feature in Folio Views works well to resize the text display.
Then hitting Zoom gives me a nice large display. Since the Display
windwo has been resized it wraps nicely.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 23:11:39 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Geert van Wirdum <v.wirdum@HCCNET.NL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Geert van Wirdum <v.wirdum@HCCNET.NL>
Subject:      Re: CP Pack (way boring sorry!)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Second thought: you copied from the installation disks, you say? These
files are packed, I believe. That is why you should install, or copy an
installed CPack.

Geert

> Longden suggested DOS copying the files
> to my C drive and running it using app200.bat.  I did the same and but =
did
> not find the app200.bat file although I did end up with 29 files from =
the
> three disks.  Strike one.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 14:22:13 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: CP Pack (way boring sorry!)
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

I agree with Geert, and maybe I wasn't clear on that with Tom.

I DOS copied the files from a Cpack already installed on a my notebook computer,
directly to my NT desktop, and it worked.

But a full installation from the diskettes is always the preferred way to go (I
just couldn't find my steekin' diskettes!)

- Longden





Geert van Wirdum <v.wirdum@HCCNET.NL> on 11/08/99 02:11:39 PM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Geert van Wirdum <v.wirdum@HCCNET.NL>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: CP Pack (way boring sorry!)




Second thought: you copied from the installation disks, you say? These
files are packed, I believe. That is why you should install, or copy an
installed CPack.

Geert

> Longden suggested DOS copying the files
> to my C drive and running it using app200.bat.  I did the same and but did
> not find the app200.bat file although I did end up with 29 files from the
> three disks.  Strike one.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 14:23:08 -0800
Reply-To:     Mark Willis <mwillis@foxinternet.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Need a URL again, for those Accton Ethernet cards.
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Well, I *thought* I bookmarked this one, folks;  Apparently, NOT.

I think this was shown here or on the news server?

Anyways, if someone can reply to me off-list (I set reply-to to just
myself), on that URL for the $56ish (IIRC) Accton cards, someone wants
me to possibly buy them one & ship it overseas, so it'll help them a lot
if I have that URL <G>

(I have about 10 desktops with PCMCIA docks, and scads of other laptops
/ palmtops that happily use my SMC and other PCMCIA net cards, so I
probably will pass on getting one of these for now;  I'd be in trouble
without the PC110, HP200LX, etc. etc. <G>)

Thanks in advance!

  Mark

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 09:30:58 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russell Hemery <rhemery@POWERUP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russell Hemery <rhemery@POWERUP.COM.AU>
Subject:      Re: DOS version of QuickBooks?
Comments: To: David Sargeant <david@HPLX.NET>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

At 09:24 AM 8/11/99 -0800, you wrote:
>I'm curious ... I run Quicken 8 on my palmtop to keep track of finances.
>Does anybody know if Intuit ever made a DOS version of QuickBooks, with
>its business-oriented accounting rather than Quicken's personal

Hi David & list  I did a search on intuit site www.intuit.com and found

QuickBooks for DOS 1.0

                     IBM XT, AT, PS/2, or 100% compatible computer.
                     A hard disk, with at least 1.9 MB of available disk space.
                     640K memory (expanded memory recommended).
                     Monochrome or color monitor
                     DOS 2.1 or higher.

                 QuickBooks for DOS 2.0

                     IBM XT, AT, PS/2, or 100% compatible computer.
                     A hard disk (3.5 MB of available disk space).
                     640K memory (expanded memory recommended).
                     Monochrome or color monitor
                     DOS 3.0 or higher.

                 QuickBooks for DOS 2.1

                     IBM XT, AT, PS/2, or 100% compatible computer.
                     A hard disk (3.5 MB of available disk space).
                     640K memory (expanded memory recommended).
                     Monochrome or color monitor
                     DOS 3.0 or higher.

It seems as if version 2.1 is last dos version.

I could not find if it has business categories.

Hope this helps

Russell

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 14:36:49 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              neill <neill@KEYWAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         neill <neill@KEYWAY.NET>
Subject:      Re: --Morphy One
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>>>>>>>I ran across the following URL that has some pretty good pictures of
the
Morphy One. It has one picture in particular (at the bottom of the page)
that shows a size comparison of the Morphy One -vs- the 200LX.<<<<<

Seems that this puppy is smaller than the 200LX in at least 2 of its 3
dimensions, so how the hell are they fitting in 2 PCMCIA slots ??

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 00:18:52 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      LXPRO
Comments: cc: bigamons@freemail.it
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Christian,

you solve your serial port power problem through Ctrl-Filer.
Select, if you wish to have serial power turned ON or OFF in a
DOS shell.

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 00:18:53 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: Mexico Metro Map
Comments: To: d dv <ddvteach@juno.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

d dv wrote:

> > > Yahoo USA can design any street map ...
> > Any hope on this?
> ...but I guess you are not interested from what you said.

could you please email me such a map and I'll check what's
the problem with these maps.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 16:09:05 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Off-topic: Top metrication advocates in USA?

Ken
And I bet you think we went to the moon, that Roswell, NM
is just a tourist site and Area 51 is just where the gov't builds
the next generation of Cargo Jets! ;)

Kom on Ken, of course that's what we're doing...

Better to BE than to have,
Semper mobilis,
yor pall al...................

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 19:10:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: --Morphy One
Comments: To: neill <neill@KEYWAY.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon,  8 Nov 1999 19:04:25 -0500 (EST)

01h27m22s ago ...
On Mon,  8 Nov 1999, neill wrote:

> Seems that this puppy is smaller than the 200LX in at least 2 of its 3
> dimensions, so how the hell are they fitting in 2 PCMCIA slots ??

Hmmm the size is hard to judge in those photos, but it looked about the
same size to me...   I think the posted specs were 2 CF slots, not 2
full-size PCMCIA.  Whatever... I hope this becomes available in the US,
and has support.  I could go for it.


Regards

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 18:05:29 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Keefe <emkeefe@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Keefe <emkeefe@USWEST.NET>
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Rian Maartens wrote:"This is my first email from Outlook Explorer "

Is this a new program? It looks good coming in via Outlook Express.
.ed.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 01:52:10 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: Morphy one
In-Reply-To:  <2B24B1089184D111B2A90000F6AA27B3041FF261@memex1.harrahs.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 8 Nov 1999, Steve Dowell wrote:

> I ran across the following URL that has some pretty good pictures of the
> Morphy One. It has one picture in particular (at the bottom of the page)
> that shows a size comparison of the Morphy One -vs- the 200LX.

AFAIKS those were only 3D rendered drawings of the Morphy One and not the
real product per se.

The display looks smaller (more squashed) than the LX's already tiny
display.


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 17:21:42 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Falk <Ed.Falk@ENG.SUN.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Falk <Ed.Falk@ENG.SUN.COM>
Subject:      Re: File transfer...
Comments: To: peniel@WEB2000.NET

Don't forget lxtools.  Compiles & runs under unix; talks the
file manager protocol.  I use it all the time.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 17:29:41 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, katd@POCKETMAIL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Kat Deutscher <katd@POCKETMAIL.COM>
Subject:      Re: PE/PIM possible new features

I also prefer the date format 1999-11-08.

Andreas has already addressed all of my other wishes for PIM/PE and I use it daily.

Thanks.

-- Kat

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 19:05:16 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: His Word / infobases
In-Reply-To:  <382745DC.97B394A@uswest.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 8 Nov 1999, Patrick West wrote:

> I use a couple of Folio Views items on my Palmtop. Version 2.x for DOS
> runds fine. I have a Double speeded 200lx my daughter uses a single
> speed 100lx and it runs fine on her machine.

Very handy software, but I'm a little nervous that one of Folio's sales
people told me Views 2.1 isn't Y2K compliant.  Hopefully that's just
marketing talk to get people to upgrade to a Windows version...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 19:09:25 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: His Word / infobases
In-Reply-To:  <38274721.4961E63D@uswest.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 8 Nov 1999, Patrick West wrote:

> The dos version runs fine on my palmtop.  You can grab a test file at
> http://skyscraper.fortunecity.com/monitor/813/folio.zip

I have the DOS version and yes, it runs on the palmtop, but what I want is
to find out the file format so we can build a viewer designed specially
for the palmtop, with add-on features as well like notes and book
arks.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 21:42:04 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Requalifying members
Comments: To: Longden_Loo@CANDLE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> >> Can you please put me out of your e-mail mailinglist.
>
> >Everyone stand clear! David is about to go bezerk on someone <g>.
>
> Maybe Al should send out a "requalifying" test every 6-12 months to all members
> (individually, not on the list).  Failure to reply or answer correctly results
> in removal:
...

If all these clueless people that want off the list would only read and
follow the 1 line added at the bottom of every post we'd all be much
happier.  It's not rocket science folks...

Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 02:52:18 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: How quickly they forget...
Comments: To: Ken Hansen <khansen@NJCC.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Re: IBM wearable

> But this weight includes a headset - the 95/100/200 LX does not...

And does NOT seem to include a keyboard?????  I'm still old fashioned
and find typing works better than most other methods I've seen for many
things.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 02:52:44 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Mexico Metro Map
Comments: To: Stefan.Peichl@T-ONLINE.DE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> d dv wrote:
>
> > > > Yahoo USA can design any street map ...
> > > Any hope on this?
> > ...but I guess you are not interested from what you said.
>
> could you please email me such a map and I'll check what's
> the problem with these maps.

I downloaded them.  The problem is they are saved with an odd extension
or none at all.  They are GIFs in color but displayed reasonably well by
lxpic. Actually, turning one into a bw negative using Paintshop did not
really improve their readability.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 02:53:02 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: --Morphy One
Comments: To: neill <neill@KEYWAY.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Seems that this puppy is smaller than the 200LX in at least 2 of its 3
> dimensions, so how the hell are they fitting in 2 PCMCIA slots ??

I believe it said two COMPACT cards.  But I would hope one or both slots
would support a compact size modem!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 21:05:22 +0930
Reply-To:     rwhitby@hplx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rod Whitby <rwhitby@HPLX.NET>
Subject:      Re: ccLXPOP - soliciting ideas for improvement
Comments: To: Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>

Brian McIlvaine writes:
> If anyone has ideas on what improvements could be made to ccMail, I am
> interested in hearing them! Thanks

Feel free to integrate the latest code from LXMTA (which now
includes IMAP support with full expression-based selection of
message downloading which is inherent in the IMAP protocol).

But then you'd have to rename ccLXPOP to ccLXMTA (which
doesn't sound as good) :-)  At least you'd be the second
palmtop application with IMAP support.

I'll be uploading a new beta version (including source code,
of course) as soon as I get back from this trip (I'm in
Austin, Texas until Wednesday).  I'm finding IMAP support to
be extremely useful, cause I can leave all my messages on the
server until I get back to work, but also download to the
palmtop a copy of only the messages I haven't seen yet
(irrespective of whether I've seen them on the palmtop or the
desktop).

-- Rod Whitby - rwhitby@hplx.net - http://rwhitby.hplx.net --

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 20:59:02 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Meyer <bmeyer@UNION-TEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Meyer <bmeyer@UNION-TEL.COM>
Subject:      Re: HisWord
Comments: To: d dv <ddvteach@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I am sending the Online Bible manual. I also have spiral bound copies for $5
(ship in US).

Bob

d dv wrote:

> On Fri, 5 Nov 1999 18:57:05 -0600 Tom Hoover <lists+hplx@HISWORD.NET>
> writes:
> > Adding/editing notes, topics, and definitions has worked since v1.2
> > (I just checked).
>
> Hi Tom.
>
> Are you planning to implement the rest of the Online Bible features (the
> essential ones, at least)?  For example, the ability to select a note or
> topic, highlight the Bible reference, press enter, and out pops the Bible
> text.  This would render the Online Bible program itself unnecesary.
>
> Also, if the notes, topics, etc. could display in zoom modes as well as
> the text, it would be neat.
>
> On another note, the last version of the Online Bible for DOS (the one on
> Tom's web site) doesn't appear to contain the manual file.   If anyone
> has it and was willing to email it to me, I would be very grateful.
> While the last version would be best, any version would do.
>
> Domingo
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
+--------------------+-----------------+
|Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
|bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
|Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
+--------------------+-----------------+
|   http://w3.union-tel.com/~bmeyer/   |
+--------------------------------------+

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 23:06:55 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Mexico Metro Map
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Tue, 9 Nov 1999 02:52:44 +0000 "F. Kaufman"
<fjkaufman@WORLDNET.ATT.NET> writes:
> > d dv wrote:
> >
> > > > > Yahoo USA can design any street map ...
> > > > Any hope on this?
> > > ...but I guess you are not interested from what you said.
> >
> > could you please email me such a map and I'll check what's
> > the problem with these maps.
>
> I downloaded them.  The problem is they are saved with an odd
> extension or none at all.  They are GIFs in color but displayed
reasonably
> well by lxpic. Actually, turning one into a bw negative using Paintshop
did
> not really improve their readability.

Something really radical must have changed about this program.   Last
time I tried it with maps I could not make heads or tails from either
desktop or palmtop.   Now I can actually *READ* street names!    I was
going by my last recollections with maps (though I have been with it with
graphics and photos).  It seems that I must have been out of touch with
the changes in the program these last 2 years with maps.   Who needs the
palmtop net maps?
To Yahoo maps I go,  to yahoo maps I go,   .  .  .   8=)

Sorry for the trouble, Stephan.   When I press W, now the street names
show up very clearly.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 23:12:21 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jerry Johnson <jajohnso@NETUSA1.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jerry Johnson <jajohnso@NETUSA1.NET>
Subject:      Re: We still need help
Comments: To: Stefan.Peichl@T-ONLINE.DE
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Hello everyone,
I would tend to add another vote for a small ferrite bead(s) at the input.
Or even a capacitor to ground to act as a low pass filter.   Also with the
ultra high freq. of cellular I believe that  just unhooking the diode
doesn't necessarily eliminate the front end as a cause.  The open leads
could still act like antennas.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 23:39:54 -0500
Reply-To:     crshare@banet.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Share <crshare@BANET.NET>
Subject:      Re: Morphy one
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Laust Brock-Nannestad wrote:

> AFAIKS those were only 3D rendered drawings of the Morphy One and not the
> real product per se.
>

I noticed that too.

Are there any real images of this product?

Does a prototype exist?

Or are they just seeing what kind of response they get before they actually
commit to manufacturing the product?

Chris S.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 00:05:01 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: FS: acCIS v4.0

Hi Hans,

>> If I were to move over to CIS from AOL today as a new CIS customer,
would
>> I be able to access CIS from my desktop, as well as from my HP200LX
with
>> acCIS v4.0?
>>
>> If so, is that software still readily available?
>
>I do all my internet exchange with a HP200LX and CSi as ISP. Software is
>available and very relyable.
>
>However I use acCIS 4.0 only to access forums on CSi. I do e-mail with
WWW/LX.

I'm not really that interested in setting up CSi as an ISP using WWW/LX
right now.  At a minimum, I just want simple (no fancy IP configurations)
CSi email access from my HP200LX right now. Does acCIS 4.0 also offer
email access?

More importantly, I seem to remember some talk a while back that the text
access option to CSi is no longer available to new CIS customers.  So,
with that in mind, does acCIS 4.0 require text access?

I currently use my desktop for all web access, but in the future, I would
like the ability to experiment with a simple HP200LX version of the
Arachne browser with CSi.  Would that also be possible for new CSi
customers?

Thanks in advance.

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 22:07:26 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Organization: Orion Enterprises
Subject:      PCMCIA Card reader/writer
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="------------E03A8FBAB5F9674DAEFB9C17"

This is a multi-part message in MIME format.
--------------E03A8FBAB5F9674DAEFB9C17
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Salutations all;
Can anyone recommend a good, inexpensive desktop PCMCIA card
reader/writer?

TIA.

- Richard

--------------E03A8FBAB5F9674DAEFB9C17
Content-Type: text/x-vcard; charset=us-ascii;
 name="rsmith.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Richard A. Smith / Patti Smith
Content-Disposition: attachment;
 filename="rsmith.vcf"

begin:vcard
n:Smith;Richard and Patti
x-mozilla-html:FALSE
org:Orion
adr:;;;;;;
version:2.1
email;internet:rsmith@enol.com
note;quoted-printable:aka, on eBay: seronac@auction.skytel.com=0D=0A*=0D=0A"Statistically, at least half of the people in the world are of below-average intelligence." * =0D=0A"If variety is the spice of life, then humor is the dessert." *
fn:Richard and Patti Smith
end:vcard

--------------E03A8FBAB5F9674DAEFB9C17--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 23:11:14 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Mon, 8 Nov 1999 23:12:21 -0500, Jerry Johnson <jajohnso@NETUSA1.NET> =
wrote:

> I would tend to add another vote for a small ferrite bead(s) at the =
input.
> Or even a capacitor to ground to act as a low pass filter.   Also with =
the
> ultra high freq. of cellular I believe that  just unhooking the diode
> doesn't necessarily eliminate the front end as a cause.  The open leads
> could still act like antennas.

Capacitors did the trick for me with a power supply that is used to power
some amatuer radio equipment that I have. The RF was leaking into the =
supply
and giving it fits, a couple of capacitors made it perform like a champ.
That is a good possibility. With some of the phones operating in the 1.2
GigaHertz range it is concievable that the leads could be acting as a 1/4
wavelength antenna and soaking up the RF. I find this thread quite
interesting...

73 de Jeff W4JEF

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 22:05:48 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Meyer <bmeyer@UNION-TEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Meyer <bmeyer@UNION-TEL.COM>
Subject:      Re: DOS version of QuickBooks?
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I have QuickBooks 2.0 disks for DOS but no manual on my web page for $2. I
can't seem to access my web page tonight, so try later if you are
interested.

Bob

David Sargeant wrote:

> I'm curious ... I run Quicken 8 on my palmtop to keep track of finances.
> Does anybody know if Intuit ever made a DOS version of QuickBooks, with
> its business-oriented accounting rather than Quicken's personal
> accounting?  And, if so, will it run on the 200LX?  If not, are there
> alternatives that will run on the 200LX?
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
+--------------------+-----------------+
|Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
|bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
|Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
+--------------------+-----------------+
|   http://w3.union-tel.com/~bmeyer/   |
+--------------------------------------+

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 1999 22:25:05 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Organization: Orion Enterprises
Subject:      Re: DOS version of Quickbooks?
Comments: To: Dave Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="------------C093592FFF03D2FE6DE50617"

This is a multi-part message in MIME format.
--------------C093592FFF03D2FE6DE50617
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I don't think there was a DOS version of Quickbooks, but I have a couple
of packages of a pretty nice little program called Clear Profit that
runs fine on the palmtop.  Anyone that wants one can e-mail me off-list.

--------------C093592FFF03D2FE6DE50617
Content-Type: text/x-vcard; charset=us-ascii;
 name="rsmith.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Richard A. Smith / Patti Smith
Content-Disposition: attachment;
 filename="rsmith.vcf"

begin:vcard
n:Smith;Richard and Patti
x-mozilla-html:FALSE
org:Orion
adr:;;;;;;
version:2.1
email;internet:rsmith@enol.com
note;quoted-printable:aka, on eBay: seronac@auction.skytel.com=0D=0A*=0D=0A"Statistically, at least half of the people in the world are of below-average intelligence." * =0D=0A"If variety is the spice of life, then humor is the dessert." *
fn:Richard and Patti Smith
end:vcard

--------------C093592FFF03D2FE6DE50617--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 00:34:03 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Clark Gaylord <gaylord@GAYLORD.ASYNC.VT.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Clark Gaylord <gaylord@GAYLORD.ASYNC.VT.EDU>
Subject:      Re: DOS version of QuickBooks?

> Date:    Mon, 8 Nov 1999 09:24:53 -0800
> From:    David Sargeant <david@HPLX.NET>
> Subject: DOS version of QuickBooks?
>
> I'm curious ... I run Quicken 8 on my palmtop to keep track of finances.
> Does anybody know if Intuit ever made a DOS version of QuickBooks, with
> its business-oriented accounting rather than Quicken's personal
> accounting?  And, if so, will it run on the 200LX?  If not, are there
> alternatives that will run on the 200LX?

I would look at PeachTree.  Excellent commercial DOS-based accounting,
but has required 386 for several versions now, as I recall.  I also
played around with TCOB (available on simtel) for a while, and it
was pretty good.

Please summarize results and findings to the list, though.  I don't
think anyone has brought up the "what are good accounting packages"
question in a while.  Do we have a "list all DOS software in category
X" faq?

Clark

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 05:59:16 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      New Version of LXTeX 2e available!
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

on my palmtop page - http://daniel.hplx.net/palmtop.html -
I have another new version of LXTeX 2e (LaTeX 2e for the palmtop) for you.

It's version 1.2.
The improvements you can read in the file HISTORY.TXT (link is on my
palmtop page).

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 00:06:48 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      WDBLoad program to enter cities into World Time
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

I've just finished the first pass of WDBLoad, which will import a CSV
file containing location data and put it into a WDB file for use by
the WorldTime app. This will let someone get location data in a
spreadsheet and easily enter it into the palmtop.

Does anyone care about this besides me? If so, is it important/useful
to also import notes? And I don't have a WDBDump - is this important?

--=20
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 06:47:53 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: We still need help
Comments: To: Mark Willis <mwillis@FOXINTERNET.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Mark,

if you want to know something about the HP's serial port, especially an
idea how to build a plug for it, you can have a look on my palmtop
site:

http://daniel.hplx.net/palmtop.html

It would be great if you would make such an IR port extender; if you
read the thread "We still need help", you know, that not only the
'universal remote fans' need such a thing, but also Stefan, Andreas and
me (and probable some others, too), who want to connect to a mobile
phone via infrared!

(oops - I just saw that this _is_ this thread. Sorry ;-) )

On my palmtop page, I also havae an article about making a IR
transmitter device for _desktop_PCs_, maybe we could use such a
schematic and modify it - this one works with 5V and connects to a
special IR connector on the motherboard; it should be easy to modify it
to work with <= 12 V and attach it directly to a RS232 port.

I'm happy if I can help you with my articles - hoping that I'll get a
device, if you're ready with them ;-)

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 03:06:10 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              lloo@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <lloo@WORLDNET.ATT.NET>
Subject:      Re: WDBLoad program to enter cities into World Time
Comments: cc: curtc@AIRMAIL.NET

   >I've just finished the first pass of WDBLoad, which will import a
   >CSV file containing location data and put it into a WDB file for
   >use by the WorldTime app. This will let someone get location data
   >in a spreadsheet and easily enter it into the palmtop.
   >Does anyone care about this besides me? If so, is it
   >important/useful to also import notes? And I don't have a WDBDump -
   >is this important?
Message-Id: <19991109080606.FUXA23762@12.72.155.233>
Date: Tue, 9 Nov 1999 08:06:06 +0000

I'm interested.

Notes may be useful for entering the source of your information, but then
if all of it comes from the same place, then the information is redundant. I
don't use the note field myself in WDB, so it's low priority to me.

I think WDBDump would be something good.  Every database needs a means to
import and export in case it needs to be debugged or fixed or migrated to a
new platform (gasp! I said that?).  It's insurance.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:07:52 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Cristian Rigamonti <bigamons@FREEMAIL.IT>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Cristian Rigamonti <bigamons@FREEMAIL.IT>
Subject:      Re: LXPRO
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

> you solve your serial port power problem through Ctrl-Filer.
> Select, if you wish to have serial power turned ON or OFF in a
> DOS shell.

Er... I hadn't mentioned in my previous message, but obviously it was the
first thing that I checked off.
Thanks anyway!

________________________________________________

I can't think of anything to say at the moment
so insert your own clever remark here...

                                       /\
                                    /\/ /\/\
_______________________RigaMonti_/\/  \/  \ \/\

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 11:35:45 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      WORD 5.5: File conversion from OFFICE 97
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi LXers,

Remark on page 15 of the Palmtop Paper (Number 5 1999),
"Helpful Add-ons to XTree":

"Microsoft offers a free utility, WDSUPCNV.EXE, that adds
extra file converion features to Office 97 and allows
documents to be saved in Word 5.x and other less-used
formats."

I have searched the Microsoft site and cannot find it there.
Could somebody help ?

Thanks in advance
Winfried

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 04:42:22 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Morphy one
In-Reply-To:  <Pine.HPX.4.20.9911090149490.9654-100000@ask.diku.dk>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 9 Nov 1999, Laust Brock-Nannestad wrote:

> The display looks smaller (more squashed) than the LX's already tiny
> display.

I'd be willing to bet the display will be the same.  At least, I hope so.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 05:26:16 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: His Word / infobases
In-Reply-To:  <38274948.6D485E5A@uswest.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 8 Nov 1999, Patrick West wrote:

> The Resize feature in Folio Views works well to resize the text
> display. Then hitting Zoom gives me a nice large display. Since the
> Display windwo has been resized it wraps nicely.

Believe me, I am very familiar with Views's features on the palmtop.  I do
that too, but the resize feature in Views is not easy to do at all, and
not flexible either.  You can only configure two windows and the rest
follow that.  For example, if you configure windows so that new ones
overlap the old ones a few characters to the right, side-by-side, they
continue outward with no respect for the zoom limits of the (zoomed)
screen.  A split-screen view would be nice too: one where you can define
windows and have the application view the data in all the windows on the
screen at once.  That way, you could define two or even three side-by-side
windows and read the first one, then skip to the second one, then the
third, and then press PgDn and have the next page fill up the 2-3 windows,
thus giving you the benefits of not having to scroll your eyes across the
whole screen (same as the benefits of VR) while still getting lots of info
at once.

A palmtop-designed Views viewer would be terrific...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:37:20 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Harry Wellner <hwellner@INAME.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Harry Wellner <hwellner@INAME.COM>
Subject:      Perl training info Netherlands
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi,

Someone in The Netherlands aware of a good training institute
of Perl. Need to acquire some knowledge for my work...

Please reply privately.
__________________________________________
    o__       Harry Wellner
   _.>/)_     Gouda - Netherlands / Europe
  (_) \(_)

Palmtop Power!--This email composed on a rugged HP200LX that
fits in your pocket!

Med vennlig hilsen / Regards /
        Mit freundlichen Gruessen /
                 Met vriendelijke groeten

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:37:18 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Harry Wellner <hwellner@INAME.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Harry Wellner <hwellner@INAME.COM>
Subject:      Re: Fw: Arachne
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hmmm, sounds rather interesting - I am going to visit the
home-page and see whether this program should be added to my
repository.


> >Yes, I am planning this, I was given one HP 1000 CX with 1 MB RAM and
> >2 MB flash cards while my visit to USA by one HP fan, so I would like

__________________________________________
    o__       Harry Wellner
   _.>/)_     Gouda - Netherlands / Europe
  (_) \(_)

Palmtop Power!--This email composed on a rugged HP200LX that
fits in your pocket!

Med vennlig hilsen / Regards /
        Mit freundlichen Gruessen /
                 Met vriendelijke groeten

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:38:59 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Jerry Johnson wrote:

> I would tend to add another vote for a small ferrite bead(s) at the =
input.

What are ferrite beads? Does anybody now the german word for it?
Should I solder them just on top of the input contacts of the
photo diode?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 21:36:14 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              SUDA Takahisa <mimmkyi@GENESIS.NE.JP>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         SUDA Takahisa <mimmkyi@GENESIS.NE.JP>
Subject:      Re: Morphy one
In-Reply-To:  <Pine.LNX.4.10.9911090441470.25491-100000@hplx.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

"David Sargeant <david@HPLX.NET>" wrote:
> I'd be willing to bet the display will be the same.  At least, I hope so.

The MorphyOne website says the LCD is Epson-made EG7014, and
I calculated from the Epson data sheet... The effective view
area is about 115.2x36mm (4.54x1.42in).

Does anybody have a 200LX and a scale handy...?

mimmkyi

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 14:46:05 +0100
Reply-To:     furlan@gmx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Dr. Werner Furlan" <furlan@GMX.NET>
Organization: OE9FWV
Subject:      Power supply of HP 200 LX
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

-----BEGIN PGP SIGNED MESSAGE-----

hello,

excuse me if the question has been posed earlier, but I am a new
Palmtop user.
Does it matter, if I connect the Palmtop to a power supply with the
wrong polarity?
I have several things running on 12V, but the polarity is different, so
it might happen that I mix up the cables and it would make me quiet, if
the palmtop has an internal protection.

thank you for reading and any answer,

Werner
OE9FWV


-----BEGIN PGP SIGNATURE-----
Version: PGP 6.0.2 -- QDPGP 2.60
Comment: http://community.wow.net/grt/qdpgp.html

iQEVAwUBOCgXjCMwfGDxkN9XAQFmVQgAkcMyf6RWn4pOtjnohNhu5X2ak6FfhEkG
ZPc/PMeNdxH11MnxEqgbYEKKq3Uz5Ta2vcz2SGdCDHET2ulXTyCYEZsmPrlD1EmY
5fb2lUXI3PMBKF1AmuhKeHISd6IY0PbZRfkokWAG3sFIlR0lVN4302UX0cZKMMOE
X6C2rjRh5OKJcU7b/ukqy9TLRzSA77MLlpgdb5jhxMRTXtIAIk3eQTWBQG23B2jp
HCMWSscz+RbtMYc9uPkEvxGOEa5NRCTDy7xLalYz5xEv/TRTJYsPwvHdj7E/L6fS
1Rv6fqMxIktv8n4al7gLegE2R/0pBqiElSwZcFIKL46x+bsRuZEzrw==
=0AZQ
-----END PGP SIGNATURE-----

Thought for the day:
    Dictatorship (n): a form of government under which everything
    which is not prohibited is compulsory.

--
Dr. Werner Furlan
mailto:oe9fwv@vlbg.at (Dr. Werner Furlan)
Visit our Amateur Radio Homepage: http://www.oe9.at/oe9xrk/
Powered by Pegasus Mail: get it FREE at:
http://www.pegasus.usa.com or  http://www.let.rug.nl/pegasus/

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:59:09 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Pierre VIGNACQ <pierre.vignacq@TURBOMECA.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Pierre VIGNACQ <pierre.vignacq@TURBOMECA.FR>
Subject:      Re: We still need help
Comments: To: Stefan.Peichl@T-ONLINE.DE
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Ferrite beads are pieces of ferrite of various shapes but having a hole i=
n
them to allow a wire to pass through. Their purpose is to dramatically
increase the inductance of the wire they're put on, in order to give it a
filtering effect.
They can have a major effectiveness if the perturbation is conducted on t=
he
wires... or none in case of a direct induction.
Additionally, they require room for them inside a box that is obviously n=
ot
designed for them.
They can be used in conjunction with the capacitors recommended by an oth=
er
person on this list for higher efficiency, but again if room is available=
...
That's why, considering these pros and cons, I would only evaluate these
filtering means after having introduced a very well referenced shielding,
providing somehow a global protection, and quantified its efficiency.
This is of course strictly personal opinion, considering all suggestion
worth testing.

With my best regards.
-----------------------------------------------------
Pierre VIGNACQ

TURBOMECA - Service Electronique / Electronic Section
Email : Pierre.VIGNACQ@turbomeca.fr
Phone : +33 - 5 59 12 55 34
Fax :   +33 - 5 59 12 51 48
-----------------------------------------------------
----- Message d'origine -----
De : Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
=C0 : <HPLX-L@UCONNVM.UCONN.EDU>
Envoy=E9 : mardi 9 novembre 1999 14:38
Objet : Re: We still need help


| Jerry Johnson wrote:
|
| > I would tend to add another vote for a small ferrite bead(s) at the
input.
|
| What are ferrite beads? Does anybody now the german word for it?
| Should I solder them just on top of the input contacts of the
| photo diode?
|
| ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
|

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 04:53:21 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: WDBLoad program to enter cities into World Time
In-Reply-To:  <JLknOG4y40v5AAMJ1cki1j4astko@4ax.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 9 Nov 1999, Curtis Cameron wrote:

> I've just finished the first pass of WDBLoad, which will import a CSV
> file containing location data and put it into a WDB file for use by
> the WorldTime app. This will let someone get location data in a
> spreadsheet and easily enter it into the palmtop.

YES!  This is cool.  Now when Longden and I grab those cities and format
them with good ol' CONV802, we can load it into WDB format.

Hmm... being a form of the database application, World Time is probably
limited to the same number of records in a database as the database app
itself, right?

> Does anyone care about this besides me? If so, is it important/useful
> to also import notes? And I don't have a WDBDump - is this important?

Both would be great!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 14:18:27 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: Morphy one
In-Reply-To:  <199911092136.FCG18051.LJJNZNN@genesis.ne.jp>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 9 Nov 1999, SUDA Takahisa wrote:

> "David Sargeant <david@HPLX.NET>" wrote:
> > I'd be willing to bet the display will be the same.  At least, I hope so.
>
> The MorphyOne website says the LCD is Epson-made EG7014, and
> I calculated from the Epson data sheet... The effective view
> area is about 115.2x36mm (4.54x1.42in).

I just measured the visible region of the 200LX display to 118x44mm
(probably a bit off), so it's a bit wider and quite a bit higher (hmm 22%
or so?) than the Epson display.


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 07:20:53 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: PCMCIA Card reader/writer
In-Reply-To:  <3827AC0E.C4E96845@enol.com> from "Richard A. Smith / Patti
              Smith" at Nov 8, 99 10:07:26 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> Can anyone recommend a good, inexpensive desktop PCMCIA card
> reader/writer?

I just posted a few days ago a unit I was satisfied with.  Costs
$115.  It's by SCM Microsystems, and Envoy is the distributor.
I am pleased with it's operation.  It is a front-loading drive,
and holds two cards.  I think the top slot can hold Type III
cards - I guess the bottom slot could too, if you don't have
anything in the top slot.

Check for them on the web.

-Chris Lott

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 05:24:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: Casino fluff

>From: swdowell & many others
What happened to the group that was "programming" and spiking
slot machines on the floor of casinos (not sure which ones)
Haven't heard much on the news, it was all hushed after a
"Breaking News" before the full story came out
Any input ? Were they using the Venerable Palmtop ?
End.of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 05:25:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: A Palmtop-Mobile Experiment

>From: MANY @manyISP
>Date: On going ...<g>
>><grin> Well, you write an application to save the inducted data to a buffer,
>>where it can be decoded and played back through the palmtop's speaker. Then tell
>>the FBI, CIA and NSA that you figured out how to turn a 200LX into a
>>Tempest-style snooping device. Then the spooks will order thousands of 200LXs
>>from HP, convincing them to put the palmtop back into production!
>Excellent! I hope this works out like this. Life can be better
>than a movie when the CIA / FBI / NSA is involved - you know
BTW a while back there was an article in a 2600 Zine (as they call it)
how to turn a the HP 200LX into a wireless data gathering device
This information is for educational purposes
The author (me) does not support illegal activities
Reads only publication that have ISBN or ISSN or LOC numbers
and supports USC 5.552.a/b
And a "search" of acronyms resulted:
Culinary Institute Of America
Fat Brain Inc
No Such Agency - Never Say Anything
John 8:32 End.of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 05:26:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Storage Options

>From: al chin <hobchi@JUNO.COM>
>Date: Friday, 05 November, 1999 20:41
>Do these Calluna 240 MB type II drives work on the 110, HP LX?
>BTW a 1 GB (type III) drive only cost $100 more.
>>> I noticed today that Mobile Planet is advertising the Calluna Type
How do you plan to use a 1 GB on the 200LX, when there is the
famous DOS 5.0 blunder of about 500MB limit (I need to look up my archive) ?
If you have written a shareware program I will gladly try it
And have not seen any replies to my posting about Quatech SPP-100 yet :(
On using external IDE or SCSI Drive with an external power slot such Double Slot
End.Of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 05:27:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: Fluff: Birthdays

You only have to match the numbers 1 through 31
Not the years, not the months (the original posting if I remember well)
The minimum number is 2 (two)
The odds are always 50-50
Either you have a match or don't
That is why casinos thrive is Las Vegas AKA Lost Wages
On a slot machine there is 3 wheels (at least)
In a card deck there is 52, in a roulette etc..., dice game ...
However on prize fight, football game or whatever your flavor is the odds are 50-50
So is birthdays AND this where the "laws of statistics" waltz in
And compile the data of many "rooms" with at least 2 people
Figures make Statistics, Statistics don't lie, Liars interpret them <G>
It is always interesting to "listen to what people have say"
(you don't have to agree)
Specially to a group of "peculiar" people who know which is a good palmtop
Common sense and Intelligence were never proportional (:-)
John 8:32 End.of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 05:27:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: FLUFF: How many new 200LX's should we buy for resale?

>From:Jorgen Wallgren <jorgen@PALMTOP.NET>
>Date:Friday, 29 October, 1999 21:23
>list can easily write an Assembler program (if we are now 700
>How many of us have a Win CE palmtop at home (of let's say 700
>bought a HP Win CE palmtop. Which means that we today have about 22
>subscribers on this list which has a HP Windows CE palmtop at home-
>shame on you!!! :)
I don't feel ashamed <G>
After I complete my mail, "surf" the net
I take out all the batteries, and use it as a hi tech paperweight
Save messages to a flash card ? What for ?
It "they" are "valuable" they will "re-produce" on the net <G>
(if the "federales" are able to trace Meli$$a to its writer
(and clearing the owner of AOL account, why should I worry
I claim the Fifth for the week end And I invoke the Fifth on the subject of programming since no programming may be done on a CE <g>
John 8:32 End.of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 05:28:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Requalifying members

>Longden Loo <Longden_Loo@CANDLE.COM>
>Date:Monday, 08 November, 1999 10:35
>>Everyone stand clear! David is about to go bezerk on someone <g>.
>Maybe Al should send out a "requalifying" test every 6-12 months to all members
>(individually, not on the list).  Failure to reply or answer correctly results
>in removal:
>To save Al some work (tallying responses and non-responses), he could hand that
>part over to David "the Knife" Sargeant.  Of course, there'll always be someone
>who'll respond to the question with,  "please remove me from your list".>
In my younger days I remember reading about a
Utility / Probe / Ping that let the LISTSERV administrator send
to verify if the email address was still valid
I know being a SysAdmin is a nice title but a lot of work
"Words must be weighed, not counted."
John 8:32 End.of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 15:24:13 +0100
Reply-To:     furlan@gmx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Dr. Werner Furlan" <furlan@GMX.NET>
Organization: OE9FWV
Subject:      Re: We still need help
Comments: To: Stefan.Peichl@t-online.de
In-Reply-To:  <m11lAXg-0003CkC@fwd08.btx.dtag.de>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

-----BEGIN PGP SIGNED MESSAGE-----

hallo Stefan,

On 9 Nov 99, at 14:38, Stefan Peichl wrote:

> Jerry Johnson wrote:
>
> > I would tend to add another vote for a small ferrite bead(s) at the
> > input.
>
> What are ferrite beads? Does anybody now the german word for it?
> Should I solder them just on top of the input contacts of the
> photo diode?
>
in german: das sind Ferritperlen. Man findet sie z.b. gratis in
kaputten Keyboards, als Entstoermaterial. Funkamateure kennen das
Problem schon vor es Handies gab :-)

regards,
Werner




-----BEGIN PGP SIGNATURE-----
Version: PGP 6.0.2 -- QDPGP 2.60
Comment: http://community.wow.net/grt/qdpgp.html

iQEVAwUBOCggfCMwfGDxkN9XAQG0NQf/dgP0FL3DTxE0mLeTQ/Rgo6IDicvgteKl
WIqT7XmvGQucU3iZ/tfCD/ZBcfwlxub/FL94LhtlXkfV1QWRj9ITDOiwgRzxnADB
qnhPtY/9rzCaWOkkC6E2L5sOwmHCBZt/y/nyCy77rdnukDUFDIj3zO0PekxlvK7y
+0Y0YNTkMPdHnEKIkLcIIPpZk/OySJ266OEcfwbA2TwvIVXrJ0HGl73Yx5AdeMVV
nWs36T7jIxhO3M1/WG02qs9TGkOOsw4ef711uwx/SByzEfva9EtJtu4MEII0mEYG
+sorQdGshfAURCU8cM1sZUL6eclI0IjJate5Wceha6EPsczSAiXJRA==
=4C/2
-----END PGP SIGNATURE-----

Thought for the day:
    The only thing that hurts more than paying income tax
    is not having to pay income tax.

--
Dr. Werner Furlan
mailto:oe9fwv@vlbg.at (Dr. Werner Furlan)
Visit our Amateur Radio Homepage: http://www.oe9.at/oe9xrk/
Powered by Pegasus Mail: get it FREE at:
http://www.pegasus.usa.com or  http://www.let.rug.nl/pegasus/

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 07:35:31 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      High Volume Supply Rumor
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Could Hal or someone definitely clarify the post that was made a few
weeks ago?  It claimed that large volume purchases of 1000LX would be
still supported by HP.  I have a application here at work that I
would gladly recommend the palmtop for, if they were still available
in such a manner.  Otherwise, I think the client will go for a palm
pilot style unit.

So, has anyone really researched this rumor?

-Chris

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 07:42:55 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Power supply of HP 200 LX
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

-----BEGIN PGP SIGNED MESSAGE-----

On Tue, 9 Nov 1999 14:46:05 +0100, "Dr. Werner Furlan" <furlan@gmx.net> =
wrote:

> Does it matter, if I connect the Palmtop to a power supply with the
> wrong polarity?

Yes, it does.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBOCgiGYJNDMXdtrgZAQGI8QQApmsJfnKS8vSdRQO9spXycChye0fbT9Gh
8EjLkXqlXmXKTX7XnvwSRnHT0GvwsHK1RUCIMGoYvLW6G+pBBX4mW0N9/WitgpRx
+AvuR8PI0bPwyYjJIritC1rGLwPeyTeCnDLGMyCYx0yzwe19raESIBv34P+SqEIb
lo0RcqDwTKs=3D
=3DatBr
-----END PGP SIGNATURE-----

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 07:55:05 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: Casino fluff
MIME-Version: 1.0
Content-Type: text/plain

I.T. employees at Harrahs are not allowed to gamble at any Harrahs
property. (probably a good idea)

Steve

        -----Original Message-----
        From:   J.A. Vart SMTP:thegeeman2@EARTHLINK.NET
        Sent:   Tuesday, November 09, 1999 5:24 AM
        To:     HPLX-L@UCONNVM.UConn.Edu
        Subject:        Re: Casino fluff

        >From: swdowell & many others
        What happened to the group that was "programming" and spiking
        slot machines on the floor of casinos (not sure which ones)
        Haven't heard much on the news, it was all hushed after a
        "Breaking News" before the full story came out
        Any input ? Were they using the Venerable Palmtop ?
        End.of.Message :<)

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 09:06:14 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Schneider <mikeschn@AMERITECH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Schneider <mikeschn@AMERITECH.NET>
Subject:      Re: DOS version of QuickBooks?
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Quickbooks 1.0 for DOS. I don't know if it will run on the palmtop.

Mike...

> I'm curious ... I run Quicken 8 on my palmtop to keep track of finances.
> Does anybody know if Intuit ever made a DOS version of QuickBooks, with
> its business-oriented accounting rather than Quicken's personal
> accounting?  And, if so, will it run on the 200LX?  If not, are there
> alternatives that will run on the 200LX?
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 09:18:04 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: FS: acCIS v4.0
Comments: To: John J Vanderstel <j_vanderstel@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

John,

> >However I use acCIS 4.0 only to access forums on CSi. I do e-mail with
> WWW/LX.
>
> I'm not really that interested in setting up CSi as an ISP using WWW/LX
> right now.  At a minimum, I just want simple (no fancy IP configurations)
> CSi email access from my HP200LX right now. Does acCIS 4.0 also offer
> email access?

Yes - you have regular access to your mailbox with acCIS. I prefer WWW/LX
because there you have the possibility of redericting e-mail to specific
folders during downloading.

> More importantly, I seem to remember some talk a while back that the text
> access option to CSi is no longer available to new CIS customers.  So,
> with that in mind, does acCIS 4.0 require text access?

It has nothing to do with NEW CIS customers. CIS switched old DEC ASCII servers
to new - I think - WIN NT servers running HMI only (CIS proprietary). AcCIS 4.0
supports HMI however. You will be able to visit and download all CSI forums.

> I currently use my desktop for all web access, but in the future, I would
> like the ability to experiment with a simple HP200LX version of the
> Arachne browser with CSi.  Would that also be possible for new CSi
> customers?

I don't know Arachne. As I said I do all my internet conversation on HP200LX.
This is probably faster than on a reg desktop with Windoze SW.
Surfing is another issue. You will be able to access many webpages but
resolution and speed are poor due to limitations of HP200LX (video, Baud rate).

If you go for CSI don't let yourself talk into the "new" CSI 2000 program !

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 09:01:08 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Re: Morphy one
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> The MorphyOne website says the LCD is Epson-made EG7014, and
> I calculated from the Epson data sheet... The effective view
> area is about 115.2x36mm (4.54x1.42in).
>
> Does anybody have a 200LX and a scale handy...?

The screen opening is 122 x 47 mm, and my view area is 118 x 44
mm.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 09:02:44 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Keefe <emkeefe@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Keefe <emkeefe@USWEST.NET>
Subject:      Re: WORD 5.5: File conversion from OFFICE 97
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

W. Zettkemeyer wrote: " I have searched the Microsoft site and cannot find
it (WDSUPCNV.EXE) there. Could somebody help ?"

http://officeupdate.microsoft.com/downloadDetails/wdsupcnv.htm

You do have to dig for this one. Please note that this is a WORD 97 add in.
It does not work on the Palmtop (as far as I know.)

.ed.PTP

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:03:44 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: Requalifying members
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue,  9 Nov 1999 09:59:29 -0500 (EST)

   The ListServ is set up now to poll every 12months to request a
   comfirmation from the subscribing address to verify that the
   subscriber still wants "on" the LIST, and to ensure that the address
   is valid.

   Cheers...AJKind

01h31m29s ago ...
On Tue, 9 Nov 1999, J.A. Vart wrote:

>...
> In my younger days I remember reading about a
> Utility / Probe / Ping that let the LISTSERV administrator send
> to verify if the email address was still valid
> I know being a SysAdmin is a nice title but a lot of work
> "Words must be weighed, not counted."
> John 8:32 End.of.Message :<)

*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 15:07:18 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: We still need help
Comments: To: Pierre VIGNACQ <pierre.vignacq@TURBOMECA.FR>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Ferrite beads are pieces of ferrite of various shapes but having a hole i

> filtering means after having introduced a very well referenced shielding,
> providing somehow a global protection, and quantified its efficiency.

Now that I think about it, my old Osborne was painted inside with some
kind of "shielding" "paint."   Is there some form of liquid paint that
could be use to coat the inside (outside but not pretty) of the hp to
provide protection?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 09:21:44 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Fwd: Rejected posting to HPLX-L@UCONNVM.UCONN.EDU
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

David wrote:

> Go to http://list.hplx.net and unsubscribe yourself.  That works much
> faster than sending messages to the list itself asking to be removed.

Are you exercising those new techniques you learned in that
putting up with the stupidity in human beings class?  :-)

Had to post this twice, first time I did not have the "David
wrote:", and server thought it was a list command.  Never had
that happen yet.  Learned something new today.  :-)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 08:28:15 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: DOS version of QuickBooks?
In-Reply-To:  <1270022238-25113144@talent.com.au>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 9 Nov 1999, Russell Hemery wrote:

>                  QuickBooks for DOS 2.1
>
>                      IBM XT, AT, PS/2, or 100% compatible computer.
>                      A hard disk (3.5 MB of available disk space).
>                      640K memory (expanded memory recommended).
>                      Monochrome or color monitor
>                      DOS 3.0 or higher.
>
> It seems as if version 2.1 is last dos version.  I could not find if
> it has business categories.

Thanks for the info!  Does anybody know where I could find a copy of 2.1?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 08:55:07 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Storage Options
In-Reply-To:  <199911091324.FAA22569@snipe.prod.itd.earthlink.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 9 Nov 1999, J.A. Vart wrote:

> How do you plan to use a 1 GB on the 200LX, when there is the famous
> DOS 5.0 blunder of about 500MB limit (I need to look up my archive) ?

I believe the limit is not from DOS 5, but from the BIOS.  On desktops,
older computers with a pure cylinder-head-sector method of mapping drive
sizes could only go up to about 528MB.  On the palmtop, it may be
different.  I know there are people working on drivers to read large flash
cards that don't currently work in the 200LX (you need the Acecard driver
to read anything over 220MB) and perhaps these drivers will enable us to
read flash cards of any size.  But I hadn't heard of a 500MB limit in DOS
5...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:09:10 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Flexpad Version 3.0
MIME-version: 1.0

   >Hi Palmtoppers.
   >Paul Kramer has released Version 3.0 of Flexpad. It includes a very
   >fast Multi File Search and some additional views. You can do
   >The file.jump.to feature can now be used to create links to data in
   >another file.
   >I like it very much. There is also a flexpad mailing list for those
   >who want to know more.

Where does one download this version, pray tell?  The latest version on
the Super site is 2.4.



Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:09:15 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Memo - long lines
MIME-version: 1.0

Lars stated firmly that...

   >OK,then we can make some conclusions:
   >1:Martin got problems with long lines as he uses PE
   >2:This memo related long line problem is restricted to LX users
   >who answers memo-emails.(and who not have memo)

Well, I use PE to compose all my emails on my 200LX.  I haven't noticed
any problems with the long line problem.  Perhaps its source lays
elsewhere?


Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:10:38 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      OT:Fluffiness.../Hernia Operation
MIME-version: 1.0

Peniel stated firmy that...

   >Hi gang -
   >Is it just my imagination, or has the palmtop-related content of the
   >list dropped below about 30 percent?   Seems to be mostly fluff
   >lately.   We have threads on dining in Vegas, shows in Vegas, shared
   >birthdays, cancer etc.   OK - cancer definitely isn't fluff, but it
   >is way off topic.

I've noticed this as well.  I must confess though, that except for the
"awareness spots", I enjoy the fluff.  I had hernia surgery this last
Wednesday, and am currently catching up on my email.  It's been quite
enjoyable so far, reading the large variety of content on this list.
Furthermore, the size of the LX is perfect for reading email in my
comfortable easychair.  All in all, it's perfectly delightful.  Now, if
I could only get up without that pain in my stomach...<grin>

Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:10:54 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Arachne
MIME-version: 1.0

Matthew stated firmly that:
   >I really enjoy using your Web browser and applaud that xChaos
   >software continues to support people using DOS. I also own a
   >DOS-based handheld computer (the HP 200LX) made by Hewlett-Packard.
   >There are a number of people like me who are fiercely loyal to DOS
   >software. Unfortunately however, Arachne doesn't run too quickly on
   >the HP LX series of computers. Might it be possible (provided there
   >is enough interest of course) for xChaos to produce an 'Arachne
   >Lite' version that leaves out some of the less essential features
   >and run faster on an 8087 processor?

This is an excellent letter.  Did you send this to Arachne software?
And if so, what their response?



Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:11:00 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Arachne
MIME-version: 1.0

   >That would be me...  I'm currently debugging Arachne 1.60alfa with
   >the new version of WATTCP to find some occasional problems when
   >downloading images.  I haven't tried it on the LX yet, way too busy
   >getting it 100% on my laptop first.

One would think that Arachne would run *way* too slowly on a 200LX.  It
would have too be a stripped down version to run effectively on a
palmtop, one would think.

Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:11:05 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: FS: unit
MIME-version: 1.0

Robert stated firmly that:
   >> I also have an Apex Data Mobile Plus Cellular v.34 modem (33.
   >>6Kbps/14.4fax)  that includes a cable for a Nokia 2120 (works with
   >>2160) cellphone. I have  no idea if this will work with the HP200,
   >>but it did work in several WinCE  units.
   >> thx for your attention
   >> rick
   >I use my Mobile Plus everyday in my LX.  Works fine landline &
   >cell.

Is the Apex Data Mobile Plus battery operated?  And how large is the unit?

TIA,

David
Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:11:11 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Newton keyboards
MIME-version: 1.0

Peter Castro stated firmly that:
   >Building your own cable is a bit of a pain (especially if you want
   >to make it compact enough to put into the Newton keyboard case).
   >The one from Shier will definitely be easier, but does cost a bit
   >more.

Yes, at this point ease of use is more important than cost.  Thanks for this
information.


Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:11:19 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: OT:Fluffiness...
Comments: cc: khansen@NJCC.COM
MIME-version: 1.0

Ken Hansen stated firmly that:
   >We need fresh blood in order to generate new conversations
   >"on topic" IMHO. I suspect that the HP-LX world has stopped
   >growing (in any real sense), and as it starts to contract the list
   >will have the same members in ever fewer numbers.
   >These "legacy" members already know about modems that can
   >be used, how to get units expanded, etc.

As part of the "fresh blood" to which you refer, I feel compelled to speak
out here a bit.  Although much of my contributions come in the form of
questions, I have also posted about discoveries that would enrich the
palmtop community (The Diabetic Daily Log, etc.).  I've also posted about
the superiority of this device in performing specific tasks, something that
list members know all too well, but certainly an area that is on topic.
Moreover, a certain amount of latitude with "off-topic" discussion enriches
the list, as long as such discussions begin with palmtop-centered topics and
stray off from there.  Does this view run counter to the traditions and
rules of the list?

Regards,

David Ball
Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:11:24 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Question about Upgrading a 200LX
MIME-version: 1.0

Robert Hocking stated firmly that:

   >That is what I did just last Christmas, as a present to myself.
   >Now if they would just get the backlit project done in time for
   >this Christmas, I could upgrade my backup, backup machine (#3)
   >to a backlit, doublespeed, 8 meg, or maybe 64 meg.  Spring of
   >99 catalog has price of 8 meg doublespeed at $159, and it seems
   >that is what I paid for mine.  The 8 meg is plenty for me, and
   >if I went to a larger size I would either have to change my
   >backup strategy, or buy a larger flash card, because I do a full
   >volume backup to my flash card every night, and then also once a
   >week, and my "C" drive only has 2 meg of used space, so my 40
   >meg flash card has been large enough.  Hope this helps.

Indeed it does.  Actually, a 16 megabyte unit would be ideal, but I think
the 8 megabyte DS unit will be more than satisfactory.  I am most likely
going to use my Christmas bonus money at work for this, and spring for the
unit in early December--right in time for the holidays!  <Grin>

I will then have my 4 megabyte unit as backup, and the 8 meg unit as
primary...And then I will search out one more unit on Ebay for
safekeeping...<g>

Regards,

David Ball
dmb10@swbell.net



Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:11:41 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: OT:Fluffiness...
MIME-version: 1.0

   >It seems to me that the handheld "serious" _mobile_ computing
   >(which excludes in my mind almost all the WinCE line) is
   >becoming incredibly interesting to people. This is probably
   >fed by people being fed-up with WinCE, by advances in mobile
   >telephony, and the real growing need to have computing on the
   >go, pervasive, everywhere, all the time.

This is quite fascinating, and indeed the reason I've enjoyed the palmtop so
much.  I know no longer think of purchasing a laptop, since this unit is so
flexible in meeting all of my needs.  I can get all my work done on the fly.
 My documents for school are typed up while I'm riding to and from
University on the bus.  (Parking is quite impossible there during the day.)
I can read and respond to my email at intervals throughout the day.  My
appointments and Contacts are at the touch of my fingers, and I never have
to waste time sitting down reentering information on my desktop.  All this,
and great portability and battery-life, too!  One cannot find this on a
WinCE model--but that color screen sure is "pretty"!  <Grin>


Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:11:47 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Questioon about upgrading a 200LX
Comments: cc: hal_goldstein@THADDEUS.COM
MIME-version: 1.0

Hal stated dirmly that:

   >It's $159.  You can call us at 800 373 6114.  You will receive
   >within 1 week after we receive the unit.

Thanks for this information.  I've saved it in my Archive file.
Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 11:17:32 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Striegel, Alan" <Striegel@PIOS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Striegel, Alan" <Striegel@PIOS.COM>
Subject:      FW: WDBLoad program to enter cities into World Time
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

I am very interested in the WDBLoad program.  It would also be useful to be
able to import notes.  Using the Notes field keeps users from having to add
another database field to handle some custom function.

The ability to export WDB files would also be very useful, especially if I
have modified the entries enough to need them elsewhere.

Alan

>From: Curtis Cameron mailto:curtc@AIRMAIL.NET

>I've just finished the first pass of WDBLoad, which will import a CSV
>file containing location data and put it into a WDB file for use by
>the WorldTime app. This will let someone get location data in a
>spreadsheet and easily enter it into the palmtop.
>
>Does anyone care about this besides me? If so, is it important/useful
>to also import notes? And I don't have a WDBDump - is this important?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 17:33:23 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Pierre VIGNACQ <pierre.vignacq@TURBOMECA.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Pierre VIGNACQ <pierre.vignacq@TURBOMECA.FR>
Subject:      Tr: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

----- Message d'origine -----
De : Pierre VIGNACQ <pierre.vignacq@turbomeca.fr>
=C0 : <fjkaufman@worldnet.att.net>
Envoy=E9 : mardi 9 novembre 1999 16:28
Objet : Re: We still need help


| This is a pretty nice solution to keep plastic boxes in EM environment =
if
it
| can be decided at design step.
| I don't know any reference of such a paint to obtain conductive film on
| plastic.
| Additionaly, if available, this would gives us pain to provide a low
| impedance connection between this conductive surface (that you cannot
solder
| on) and the ground plane.
| A very low impedance link between shielding and ground potential refere=
nce
| is mandatory to provide a low impedance path to ground for the intercep=
ted
| perturbation. This path needs to be "easier" than the parasitic
capacitance
| between the shield and the circuit, that's why good soldering and large
| straps are required.
| That's why I wouldn't paint my LX...
|
| -----------------------------------------------------
| Pierre VIGNACQ
|
| TURBOMECA - Service Electronique / Electronic Section
| Email : Pierre.VIGNACQ@turbomeca.fr
| Phone : +33 - 5 59 12 55 34
| Fax :   +33 - 5 59 12 51 48
| -----------------------------------------------------
| ----- Message d'origine -----
| De : <fjkaufman@worldnet.att.net>
| =C0 : HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Pierre VIGNACQ
| <pierre.vignacq@TURBOMECA.FR>
| Envoy=E9 : mardi 9 novembre 1999 16:07
| Objet : Re: We still need help
|
|
| | > Ferrite beads are pieces of ferrite of various shapes but having a
hole
| i
| |
| | > filtering means after having introduced a very well referenced
| shielding,
| | > providing somehow a global protection, and quantified its efficienc=
y.
| |
| | Now that I think about it, my old Osborne was painted inside with som=
e
| | kind of "shielding" "paint."   Is there some form of liquid paint tha=
t
| | could be use to coat the inside (outside but not pretty) of the hp to
| | provide protection?
| |
|

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 08:36:36 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: OT:Fluffiness...Vegas
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

   >Is it just my imagination, or has the palmtop-related content of the
   >list dropped below about 30 percent?   Seems to be mostly fluff
   >lately.   We have threads on dining in Vegas, shows in Vegas, shared

I for one, encouraged the Vegas thread, but didn't see that as entirely
off-topic since several list members were planning on "doing Vegas" for Comdex,
so the information being offered by members is useful and timely to a group of
us.

True, that this is not palmtop-related, but it is certainly important to a
number of members (lurking and otherwise) who might be otherwise difficult to
reach individually.

I ask for a bit of indulgence here, Comdex is indirectly relevant to our
palmtop, and does not recur with a frequency that should pose an ongoing
bandwidth problem.

Certainly those of us who don't use Xfinder, PE/PIM, et. al, have been no less
patient with the use of bandwidth by those who do.

My $.02  (not enough for the slots tho).

- Longden

PS  Anyone know good/special deals being offered on (family) entertainment in
Vegas?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:38:05 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: OT:Fluffiness...
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 9 Nov 1999 10:11:19 +0600, David Ball <dmb10@SWBELL.NET> wrote:

> Does this view run counter to the traditions and
> rules of the list?

Nope, not really :)

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 08:48:52 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Using 200LX as WWW browser
Comments: To: David Ball <dmb10@SWBELL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

David,

> Since I'm going to be upgrading my 200LX soon, I was wondering exactly
> how *useful* the 200LX is for Web surfing via WWW-LX.  With a
> doublespeed unit, just how much serious work can one get done?  I like

First, I work at D&A Software, which sells WWW/LX. HV is a
client program that "paints" Web documents on the palmtop
screen.

You use the term "serious Webbrowsing" and I am not sure what
you mean. My take: HV is a 75K program. It supports HTML 3.2
specifications. This means no Java, no Javascript, no animated
GIFs. Tables are not rendered as you may be used to them in
Netscape or MSIE, but much simpler and with regard to the
screen limitations (and CGA). Frames are rendered by creating
an on the fly document with links to each of the pages in the
frameset, since it is hard to imagine cramming a 1078x1280
(or even a full 640x480) into a CGA screen for example.

There are other limitations for HV, check the docs.

Unfortunately, the Web is a moving target and daily, another
doodad is invented - not a chance for these to be supported.
Some Webpages are full of doodads, and will not show well, if
at all on HV. It also seems there is more and more doodads,
and less content on the Web, but it may be just my personal
impression.

Others mind the fact that they try to convery information, not
wow-factor, and those Webpages look file.

You also mentio you look for info, not visual effects - it may
work fine with HV, depends on the doodad-factor of the Webpage
and if the Webmaster decided Java is a must or not.

HV is freeware that works with the WWW/LX TCP/IP stack.

Hope this helps.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 16:53:26 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: We still need help
Comments: To: Stefan.Peichl@T-ONLINE.DE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi Stefan,

> What are ferrite beads? Does anybody now the german word for it?
> Should I solder them just on top of the input contacts of the
> photo diode?

Ferrite =3D Ferrit. (klar)
bead    =3D Tropfen, Perle, im Plural auch Kranz

Das sind die Dinger, wie sie auch z.B. am seriellen Kabel vom HP
connectivity kit dran sind, die schwarzen, meist zylinderf=F6rmigen mit
Isolationsmaterial umh=FCllten Gebilde.

Sie unterdr=FCcken St=F6rsignale.

Oops, sorry, I'll continue in English - this mail will go to the list!

HP connectivity cable:

HP plug-----Ferrite bead----------------------------PC plug

You mustn't _solder_ it onto the contacts, just lay it around them or
maybe fix it with glue.

But I don't know how this should prevent our signals received from the
cell phone, since they aren't received by the photo diode but by the
receiver circuit _behind_ the diode.

GTX
daniel


--                                                     =20
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------
                                                        =20

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 10:37:31 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Requalifying members

Al
Tried to log on from yahoo no luck.  Kan yu switch
me from JUNO to hobchi@yahoo.com

TIA
Better to be than to have,
Semper mobilis,
    o__       me on a bike
   _.>/)_     yor pal al...
  (_) \(_)    on the road

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 09:37:41 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@JUNO.COM>
Subject:      Re: Storage Options

>>Do these Calluna 240 MB type II drives work on the 110, HP LX?
>>BTW a 1 GB (type III) drive only cost $100 more.
>>>> I noticed today that Mobile Planet is advertising the Calluna Type

>How do you plan to use a 1 GB on the 200LX, when there is the
>famous DOS 5.0 blunder of about 500MB limit (I need to look up my
>archive) ?    Gee, that may be a problm.

Then again I didn't know if the 240 would work either ergo my quest.
I'm on a 110 list too and didn't know th origin of the msg as I don't see
my headers.
Sorry 'bout that if yor confused.   My fault.  >:(

Semper mobilis
yor pal al............

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:14:16 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: FS: acCIS v4.0

Hi Hans,

Thanks so much for the info on acCIS v4.0.  Where might I find it?

Also, why steer clear of CIS 2000?  How is it different than other
options?

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 19:27:41 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: Requalifying members
In-Reply-To:  <19991109.105639.3190.4.hobchi@juno.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 9 Nov 1999, al chin wrote:

> Al
> Tried to log on from yahoo no luck.  Kan yu switch
> me from JUNO to hobchi@yahoo.com

Perhaps you wrote subskribe instead of subscribe?


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 12:58:35 +0000
Reply-To:     melancon@microgear.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Melancon <melancon@MICROGEAR.NET>
Subject:      Free Accounting program (was - Re: DOS version of QuickBooks?)
In-Reply-To:  <Pine.LNX.4.10.9911090827480.25491-100000@hplx.net>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

David


Have a look at this site - they offer their DOS version of their business accounting
software free.

http://www.accsoft-ch.com/free.htm



> Date:          Tue, 9 Nov 1999 08:28:15 -0800
> From:          David Sargeant <david@HPLX.NET>
> Subject:       Re: DOS version of QuickBooks?
>
> On Tue, 9 Nov 1999, Russell Hemery wrote:
>
> >                  QuickBooks for DOS 2.1
> >
> >                      IBM XT, AT, PS/2, or 100% compatible computer.
> >                      A hard disk (3.5 MB of available disk space).
> >                      640K memory (expanded memory recommended).
> >                      Monochrome or color monitor
> >                      DOS 3.0 or higher.
> >
> > It seems as if version 2.1 is last dos version.  I could not find if
> > it has business categories.
>
> Thanks for the info!  Does anybody know where I could find a copy of 2.1?
>
Best Regards,
Mike Melancon

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 20:14:03 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Re: Cellular phone
Comments: To: LP <lprado@DYNAMO.COM.AR>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

>         Anyone knows if it possible use the 200LX with a Ericsson KF788 =
phone ?

I am not sure. But i think You can use it with the ericsson dc-23 pcmcia =
modem and the apropriet cable.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:05:27 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: Fw: Arachne
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>Hmmm, sounds rather interesting - I am going to visit the
>home-page and see whether this program should be added to my
>repository.

As others have said on the list, Arachne at present is not too efficient on
the palmtop. It works great on my Win 98 desktop. I turn my machine on,
choose Safe mode command prompt only and I'm on the Internet in about 10
seconds as opposed to waiting, waiting, and waiting to get on in Windows.

xChaos is also working on a Linux version too, fyi.

__ms__

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:12:56 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: Using 200LX as WWW browser
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>You use the term "serious Webbrowsing" and I am not sure what
>you mean. My take: HV is a 75K program. It supports HTML 3.2
>specifications. This means no Java, no Javascript, no animated
>GIFs. Tables are not rendered as you may be used to them in
>Netscape or MSIE, but much simpler and with regard to the
>screen limitations (and CGA). Frames are rendered by creating
>an on the fly document with links to each of the pages in the
>frameset, since it is hard to imagine cramming a 1078x1280
>(or even a full 640x480) into a CGA screen for example.

You should also be aware David that HV does not support extended character
sets. This means that Web sites that use "typographers' quotes" (i.e. ones
that are angled properly like you see in books, newspapers and most new word
processors) and other characters are turned into dashes.  This can make
reading newspapers online rather annoying.

Still, HV is very easy to use and has the look and feel of the built-in
apps. Why don't you download the shareware version and decide for yourself.

__ms__

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:27:18 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: Using 200LX as WWW browser
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>You should also be aware David that HV does not support extended character
>sets. This means that Web sites that use "typographers' quotes" (i.e. ones
>that are angled properly like you see in books, newspapers and most new
word
>processors) and other characters are turned into dashes.  This can make
>reading newspapers online rather annoying.

I also neglected to mention that HV does not support a _very_ typical method
that Web page authors use to make the beginnings of lines indented (the
&nbsp; tag). Instead of giving you a blank space, HV gives you an underscore
(_).

Even though I wish it supported these features, it _is_ a solution for
DOS-based handhelds nonetheless. I don't have my Windows CE unit around any
more but Web browsing is one area (perhaps the only one ;) where CE beats
the LX hands down...at least for now.

__ms__

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:37:56 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: Arachne
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

David,

The message of mine you quoted was sent to xChaos software and was Cc'd to
HPLX-L. They did respond and I forwarded the response to HPLX-L as well.
Because I often lose track of threads, I'm sending you the forwarded
response off-list.

__ms__

>Matthew stated firmly that:
>   >I really enjoy using your Web browser and applaud that xChaos
>   >software continues to support people using DOS. I also own a
>   >DOS-based handheld computer (the HP 200LX) made by Hewlett-Packard.
>   >There are a number of people like me who are fiercely loyal to DOS
>   >software. Unfortunately however, Arachne doesn't run too quickly on
>   >the HP LX series of computers. Might it be possible (provided there
>   >is enough interest of course) for xChaos to produce an 'Arachne
>   >Lite' version that leaves out some of the less essential features
>   >and run faster on an 8087 processor?
>
>This is an excellent letter.  Did you send this to Arachne software?
>And if so, what their response?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 14:44:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Novosad <Novosad@SERVER030.FWB.SAIC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Novosad <Novosad@SERVER030.FWB.SAIC.COM>
Subject:      Re: We still need help
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

> "F. Kaufman"
> Now that I think about it, my old Osborne was painted inside with some
> kind of "shielding" "paint."   Is there some form of liquid paint that
> could be use to coat the inside (outside but not pretty) of the hp to
> provide protection?

Yes, even comes in aerosol spray cans.
Normally used for microwave radiation
I believe.  Search on Electromagnetic
Interferance (EMI) Shielding.  I think
the stuff is ferrite or ferric powder
in a binder.

Steve

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 11:23:41 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      Re: Power supply of HP 200 LX
Comments: To: furlan@gmx.net
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I've connected adapters to my 200LX with the wrong polarity (car adapters with
switchable polarity) by mistake with no adverse effect. Same with the Omnibook
300.

Your mileage may vary.

Philippe

----- Original Message -----
From: Dr. Werner Furlan <furlan@GMX.NET>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Tuesday, November 09, 1999 5:46 AM
Subject: Power supply of HP 200 LX


> -----BEGIN PGP SIGNED MESSAGE-----
>
> hello,
>
> excuse me if the question has been posed earlier, but I am a new
> Palmtop user.
> Does it matter, if I connect the Palmtop to a power supply with the
> wrong polarity?
> I have several things running on 12V, but the polarity is different, so
> it might happen that I mix up the cables and it would make me quiet, if
> the palmtop has an internal protection.
>
> thank you for reading and any answer,
>
> Werner
> OE9FWV
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: PGP 6.0.2 -- QDPGP 2.60
> Comment: http://community.wow.net/grt/qdpgp.html
>
> iQEVAwUBOCgXjCMwfGDxkN9XAQFmVQgAkcMyf6RWn4pOtjnohNhu5X2ak6FfhEkG
> ZPc/PMeNdxH11MnxEqgbYEKKq3Uz5Ta2vcz2SGdCDHET2ulXTyCYEZsmPrlD1EmY
> 5fb2lUXI3PMBKF1AmuhKeHISd6IY0PbZRfkokWAG3sFIlR0lVN4302UX0cZKMMOE
> X6C2rjRh5OKJcU7b/ukqy9TLRzSA77MLlpgdb5jhxMRTXtIAIk3eQTWBQG23B2jp
> HCMWSscz+RbtMYc9uPkEvxGOEa5NRCTDy7xLalYz5xEv/TRTJYsPwvHdj7E/L6fS
> 1Rv6fqMxIktv8n4al7gLegE2R/0pBqiElSwZcFIKL46x+bsRuZEzrw==
> =0AZQ
> -----END PGP SIGNATURE-----
>
> Thought for the day:
>     Dictatorship (n): a form of government under which everything
>     which is not prohibited is compulsory.
>
> --
> Dr. Werner Furlan
> mailto:oe9fwv@vlbg.at (Dr. Werner Furlan)
> Visit our Amateur Radio Homepage: http://www.oe9.at/oe9xrk/
> Powered by Pegasus Mail: get it FREE at:
> http://www.pegasus.usa.com or  http://www.let.rug.nl/pegasus/
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 11:42:44 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      Re: FS: unit
Comments: To: Rick Kozak <rick@COLLOQUIST.ON.CA>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Rick?

Hey, I hope my offer didn't seem too farfetched! If so let me know!

Thanks,

Philippe

----- Original Message -----
From: Rick Kozak <rick@COLLOQUIST.ON.CA>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Thursday, November 04, 1999 1:32 PM
Subject: FS: unit


> I'm just not using any handhelds any more, so its time for cleaning
> house.... so I have:
>
> HP200LX Serial number SG61801239 / Speed Doubled / 8MB upgrade
> F1011A adapter
> Serial Cable
> Greenwich GA945-HP serial to parallel cable including instructions
> HP 100LX/200LX Developer's Guide
> HP Palmtop Paper Subscriber PowerDisk 1996/97 and 1998
> HP EXM TOOLS disk
> PAL library v1.6 disk
> ACE-Link v1.03 disk and manual
> HP Palmtop Paper's CD Infobase
> HP200LX User's Guide and Quick Start guide
> HP Palmtop Paper 1996 (starting at #3) to 1998 (ending at #3) including
> bonus issues
>
> I want to sell this together. I offer it here first, then its off to ebay if
> nobody wants it enough :-)
>
> I also have 4 USRobotics 9V battery powered 24/96 Worldport fax/modems. Not
> fast, but no power drain. You'll need a 25 pin male to HP connector cable.
>
> I also have an Apex Data Mobile Plus Cellular v.34 modem (33.6Kbps/14.4fax)
> that includes a cable for a Nokia 2120 (works with 2160) cellphone. I have
> no idea if this will work with the HP200, but it did work in several WinCE
> units.
>
>
>
> thx for your attention
> rick
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 12:49:04 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Power supply of HP 200 LX
In-Reply-To:  <05b801bf2aeb$83251570$7613140a@siebel.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 9 Nov 1999, Fryday wrote:

> I've connected adapters to my 200LX with the wrong polarity (car
> adapters with switchable polarity) by mistake with no adverse effect.
> Same with the Omnibook 300. Your mileage may vary.

Sometimes it can harm the palmtop, but usually not.  However, of course,
the palmtop won't be able to use the power if the polarity is wrong.  If
you turn it on it will be running off batteries.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 15:26:05 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: Using 200LX as WWW browser
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue,  9 Nov 1999 15:16:40 -0500 (EST)

01h04s ago ...
On Tue,  9 Nov 1999, Matthew W. Sheffield wrote:

> You should also be aware David that HV does not support extended =
character
> sets. This means that Web sites that use "typographers' quotes" (i.e. =
ones
> that are angled properly like you see in books, newspapers and most new =
word
> processors) and other characters are turned into dashes.

I wonder if it's possible to fix this by editing the HFN fonts used by
HV.  They can easily be edited using PFE (PAL Font Editor).  I think
PFE is available from SUPER.  The fonts look like they use code page
850 - and this gets translated to the set used on the web.  There are a
bunch of unused characters, so do any of those correspond to the
missing characters?  The unused characters are filled with short
dashes.


Later

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 14:37:05 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: High Volume Supply Rumor
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<Could Hal or someone definitely clarify the post that was made a few
weeks ago?  It claimed that large volume purchases of 1000LX would be
still supported by HP.  I have a application here at work that I
would gladly recommend the palmtop for, if they were still available
in such a manner.  Otherwise, I think the client will go for a palm
pilot style unit.

So, has anyone really researched this rumor?>>

About a week ago I got a definitive no.  HP will not sell 1000CX or 200LX in
quantity. I believe new HP's can still be ordered by dealers in Asia until
Nov 30, but nowhere else. We ordered about 300 for resale several weeks ago.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 16:10:15 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Power supply of HP 200 LX
Comments: To: furlan@gmx.net
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Does it matter, if I connect the Palmtop to a power supply with the
> wrong polarity?

I would avoid it if possible.  However there was someone several months
ago that claimed to be running their 200LX on an AC supply.  This would
seem to imply that there is some sort of reverse polarity protection.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 16:31:14 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Schneider <mikeschn@AMERITECH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Schneider <mikeschn@AMERITECH.NET>
Subject:      Re: Free Accounting program (was - Re: DOS version of QuickBooks?)
Comments: To: melancon@microgear.net
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Is this something that should go on the Super page?

Mike...

Mike Melancon wrote:

> David
>
> Have a look at this site - they offer their DOS version of their business accounting
> software free.
>
> http://www.accsoft-ch.com/free.htm
>
> > Date:          Tue, 9 Nov 1999 08:28:15 -0800
> > From:          David Sargeant <david@HPLX.NET>
> > Subject:       Re: DOS version of QuickBooks?
> >
> > On Tue, 9 Nov 1999, Russell Hemery wrote:
> >
> > >                  QuickBooks for DOS 2.1
> > >
> > >                      IBM XT, AT, PS/2, or 100% compatible computer.
> > >                      A hard disk (3.5 MB of available disk space).
> > >                      640K memory (expanded memory recommended).
> > >                      Monochrome or color monitor
> > >                      DOS 3.0 or higher.
> > >
> > > It seems as if version 2.1 is last dos version.  I could not find if
> > > it has business categories.
> >
> > Thanks for the info!  Does anybody know where I could find a copy of 2.1?
> >
> Best Regards,
> Mike Melancon
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 08:31:53 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russell Hemery <rhemery@POWERUP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russell Hemery <rhemery@POWERUP.COM.AU>
Subject:      Anyone with Palm V?
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Hi all

Apologies for the bandwidth.

My wife has jumped ship from the LX to Palm and wants me to (gulp) help her
synch files etc from her LX.

I was wondering if anyone has one of these they want to sell? (spare)

Does anyone have experience using one?

Software needed?

Directions to a mailing list with palm content?

Please mail me off list

Thanks in advance

Russell

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 15:47:45 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Keefe <emkeefe@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Keefe <emkeefe@USWEST.NET>
Subject:      Re: Free Accounting program (was - Re: DOS version of QuickBooks?)
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Mike Schneider asked: "Is this (Accounting Pro, APDOS.ZIP) something that
should go on SUPER?"

FYI, it's been available on SUPER since 12/20/1998. It's also available on
the 1999 CD Infobase from Thaddeus Computing, Inc. Although I haven't tried
it myself, the accountant at Thaddeus says that it has its own way of doing
things--perhaps the way accounting is done in Switzerland. It's not the kind
of accounting he learned.

.ed.PTP

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 00:02:37 +1000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              leon.phillips@NETSPEED.COM.AU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Leon Phillips <leon.phillips@NETSPEED.COM.AU>
Subject:      Re: Newton Keyboards
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I have noticed a few emails on the newton keyboard with the HP200LX and so I
thought I would add my two bobs worth.   I bought a keyboard from ebay for
about $45US in June and picked it up later that month when I visited the US.
Modifying the connector came in quite cheaply thanks to the great home made
connector suggestion on the SUPER site (thank you for that).   Ihave had no
problems operating the keyboard with any of the sysmgr apps and can highly
recommend the keyboard for anyone who writes reports/emails/letters on the
road.

Regards,

Leon Phillips

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 23:11:22 +1000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              leon.phillips@NETSPEED.COM.AU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Leon Phillips <leon.phillips@NETSPEED.COM.AU>
Subject:      Re: ccLXPOP - soliciting ideas for improvement
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Brian,

First off, may I say that ccLXPOP is a great product.   I really like the
concept of making use of the inbuilt ccMail program to manage my email,
particularly since I have a 2M HP200LX and use a PCMCIA modem.

On to the issue of improvements, I would like to see the following additions to
ccLXPOP in priority order:

1.      Skipped emails (due to size limitations) should have a header
downloaded including a file size.   This is particularly useful if you don't
watch the screen output as emails are downloaded (ie. I'm getting that first
cup of coffee for the day)
2.      An ability to populate the ccMail address book with phone book email
entries, possibly a CSV import function.

I hope you find these suggestions useful and keep up the good work.

Regards,

Leon Phillips

--- Reply Separator ---

Date:    Sun, 7 Nov 1999 22:22:00 -0500
From:    Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Subject: ccLXPOP - soliciting ideas for improvement

If anyone has ideas on what improvements could be made to ccMail, I am
interested in hearing them! Thanks

Brian


** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 07:52:04 -0500
Reply-To:     Nicholas Chan <ncknight@pacific.net.sg>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nicholas Chan <ncknight@PACIFIC.NET.SG>
Subject:      New 1000CX 1Meg Units for sale
In-Reply-To:  <199911091620.AAA27563@soran.pacific.net.sg>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

I have 7 units of 1000CX 1Meg, unopened. Asking $200, excluding shipping. Please
mail me off list.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:26:49 +0200
Reply-To:     Rian Maartens <maartens@iafrica.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rian Maartens <maartens@IAFRICA.COM>
Subject:      Re: We still need help
Comments: To: Ed Keefe <emkeefe@USWEST.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Ed wrote;

> Is this a new program? It looks good coming in via Outlook Express.

I don't think its new. Outlook has been around but this is the 2000 version.
I wrote "Outlook Explorer" but meant Express. Maybe this caused confusion.
Sorry.

Rian

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 01:13:42 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: Requalifying members
In-Reply-To:  <HPLX-L%99110910034369@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 9 Nov 1999, Al Kind wrote:

>    The ListServ is set up now to poll every 12months to request a
>    comfirmation from the subscribing address to verify that the
>    subscriber still wants "on" the LIST, and to ensure that the address
>    is valid.

Will this really change anything or help at all? people will still e-mail
the list requesting an unsubscribtion, because they don't want to wait for
months to be automatically unsubscribed.


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 01:16:40 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: We still need help
Comments: To: Pierre VIGNACQ <pierre.vignacq@turbomeca.fr>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Pierre VIGNACQ wrote:

> That's why, considering these pros and cons, I would only evaluate =
these
> filtering means after having introduced a very well referenced shielding=
,
> providing somehow a global protection, and quantified its efficiency.

shielding with copper turned out to work, but only external and
in a not portable solution. Any shielding done inside the
palmtop failed, because the mainboard cannot be wrapped entirely
into the shielding material. The connectors for keyboard,
pcmcia, serial port, power supply and backup battery must be left
open, which destroys any success.

I killed a keyboard and found the ferrit bead, but it is too
large to fit into the palmtop and the palmtop has no wires
inside. It uses a printed board.

Hence next test will use a capacitor. Any recommendations about
the specification I should try to suppress 900Mhz and 1800Mhz?

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 19:41:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: Requalifying members
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue,  9 Nov 1999 19:38:01 -0500 (EST)

   Not sure if it really helps or not...I know it has deleted active
   members who missed the CONFRIMATION REQUEST message, but I usually
   pick up on those manually. The confirmation sysytem has been in
   place from Day 1.

24m19s ago ...
On Tue, 9 Nov 1999, Laust Brock-Nannestad wrote:

> On Tue, 9 Nov 1999, Al Kind wrote:
>
> >    The ListServ is set up now to poll every 12months to request a
> >    comfirmation from the subscribing address to verify that the
> >    subscriber still wants "on" the LIST, and to ensure that the =
address
> >    is valid.
>
> Will this really change anything or help at all? people will still =
e-mail
> the list requesting an unsubscribtion, because they don't want to wait =
for
> months to be automatically unsubscribed.
>
> Cheers,
>
> Laust
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 16:38:40 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: Anyone with Palm V?
Comments: To: Russell Hemery <rhemery@POWERUP.COM.AU>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I don't know if this will work. But I noticed the Netscape
4.7 enterprise Calendar has a whole pile of Palm synch tools
with it.

I have not been able to get 4.7 to import the 200lx files
correctly yet. And I haven't tried the Palm Synch tools at
all.

I reach 2% then get a error message

Module <HP100SPT.CPP>, Label: 780, Service error #0x13223

Frankly when that happen I said Oh Well and haven't done
anything since.

Russell Hemery wrote:
>
> Hi all
>
> Apologies for the bandwidth.
>
> My wife has jumped ship from the LX to Palm and wants me to (gulp) help her
> synch files etc from her LX.
>
> I was wondering if anyone has one of these they want to sell? (spare)
>
> Does anyone have experience using one?
>
> Software needed?
>
> Directions to a mailing list with palm content?
>
> Please mail me off list
>
> Thanks in advance
>
> Russell
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 16:55:57 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      DBCheck finds errors in appt.adb
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Tried the latest version of DBCheck and it found some linking errors in
appt.adb, and these look like old/deleted records. Question is, what should I do
with those? It doesn't seem to have any negative impact on access to any of the
records... and besides, I can't even see them in Appt.

...

Philippe

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 17:50:14 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Appointment Book / Todo structures
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Is there any way to modify the layout of the Appointment Book and Todo
records?  Today I was looking at the Todo and figured it would be an
excellent method to keep a journal in, because it already separates
entries by date and you could have an entry for specific events, like
"Mailed package" or "Called insurance company" complete with a timestamp.
But I'd like to add a "category" field so I could separate them into
things like business, medical, car, etc.  This is probably impossible, but
... anybody have any ideas?  Currently I'm using the database app, which
is okay, but the Todo format of the appointment book would be a lot nicer.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 20:09:04 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Schneider <mikeschn@AMERITECH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Schneider <mikeschn@AMERITECH.NET>
Subject:      Re: PE/PIM possible new features
Comments: To: Paulo Custodio <Paulo.Custodio@SNAFU.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

We use the GM format, i.e. 07NO99. Just thought I'd throw that in! :-)

Mike...

Paulo Custodio wrote:

> Andreas Garzotto wrote:
> > BTW, do you know anybody who actually uses the ISO format? I have never
> > seen it in "reality".
>
> We use it daily at work. All our dates are written as 1999-11-07.
>
> Paulo
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 20:23:20 -0500
Reply-To:     profengr@delanet.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Robert H. Pigford" <profengr@DELANET.COM>
Subject:      Re: PCMCIA Card reader/writer
Comments: To: "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Check out Synchrotech in Los Angeles.  I use their "Classic" CARD READER
on my W95 machine.  The one I got mounts in the place of a 3.5" drive.
ISA bus (they have other designs).  Cost $91 last April.

        http://www.synchrotech.com/

Cheers,
        Bob Pigford

> Richard A. Smith / Patti Smith wrote:
>
> Salutations all;
> Can anyone recommend a good, inexpensive desktop PCMCIA card
> reader/writer?
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 17:41:41 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: Appointment Book / Todo structures
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I use a Letter with a number to divide into categories.

Example I use F0 (f zero)with a title of --Family--
C0 (C zero) with a title of --cong--
H0 (H zero) with a title of --Hooper--

Everything else gets a 1-9 with the letter and thus sorts
under the heading.
Got this from an other issue of Palmtop Paper.

David Sargeant wrote:
>
> Is there any way to modify the layout of the Appointment Book and Todo
> records?  Today I was looking at the Todo and figured it would be an
> excellent method to keep a journal in, because it already separates
> entries by date and you could have an entry for specific events, like
> "Mailed package" or "Called insurance company" complete with a timestamp.
> But I'd like to add a "category" field so I could separate them into
> things like business, medical, car, etc.  This is probably impossible, but
> ... anybody have any ideas?  Currently I'm using the database app, which
> is okay, but the Todo format of the appointment book would be a lot nicer.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 17:44:11 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Netscape Calendar inport
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I have not been able to get 4.7 to import the 200lx files
correctly yet.

I reach 2% then get an error message

Module <HP100SPT.CPP>, Label: 780, Service error #0x13223

Anyone know which version, if any, of Netscape Calendar
inports correctly?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:41:53 +0200
Reply-To:     Rian Maartens <maartens@iafrica.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rian Maartens <maartens@IAFRICA.COM>
Subject:      Re: Morphy one
Comments: To: Laust Brock-Nannestad <laustbn@DIKU.DK>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Laust wrote;

> The display looks smaller (more squashed) than the LX's already tiny
display<

I agree and I think it will be a negative factor for the Morphy One
notwithstanding the better processor. For my money, the next LX-type palmtop
doesn't need a colour screen but a bigger one (without making the casing
larger). HP managed this with the 600 LX series - the screen is almost as
large as the casing.

If we hope to upgrade to the Morphy One another point to consider will be
the f-keys arranged in two rows rather than in one. I can't think of good
reason why the Morphy One developers arranged the f-keys like that.

BTW, why are the Japanese ahead of the Americans in designing the next
LX-type Palmtop?

And has anyone researched the realistically achievable specs that the HP
Palmtop community would like in the 200LX follow-up?

Rian Maartens

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 18:00:35 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, bobv <bobv@SOS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         bobv <bobv@SOS.NET>
Subject:      Re: PE/PIM
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Andreas,
I just had a sad awakening with a little undocumented feature of PE.
within SRCLIST, I mad eseveral files all with a txt extension.

Then I opened pe and proceeded to work.

After some time, I closed pe to do something else. On reopening, there
was no information in one of the files (it didn't save)

After a little figuring, I noticed that I had not counted the number of
letters in the file name (it had 9 letters + extension).

A nice addition would be to trim the first 8 letters and still save the
file.

Thanks
Bob

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 22:04:33 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John Ofenloch <jofenlo@EMORY.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John Ofenloch <jofenlo@EMORY.EDU>
Subject:      word 5.1/5.5
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="------------3DDB06BC76A0C4BD2AE7CBEA"

This is a multi-part message in MIME format.
--------------3DDB06BC76A0C4BD2AE7CBEA
Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854"; x-mac-creator="4D4F5353"
Content-Transfer-Encoding: 7bit

Just wondering where word 5.1 or 5.5 are available.  The built-in memo
feature is cumbersome and doesn't export to my Mac very well.

--------------3DDB06BC76A0C4BD2AE7CBEA
Content-Type: text/x-vcard; charset=us-ascii;
 name="jofenlo.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for John Ofenloch
Content-Disposition: attachment;
 filename="jofenlo.vcf"

begin:vcard
n:Ofenloch;John
x-mozilla-html:FALSE
adr:;;;;;;
version:2.1
email;internet:jofenloch@emory.edu
x-mozilla-cpt:;1
fn:John Ofenloch
end:vcard

--------------3DDB06BC76A0C4BD2AE7CBEA--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 21:09:27 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      Re: Appointment Book / Todo structures
Comments: To: David Sargeant <david@HPLX.NET>
In-Reply-To:  <Pine.LNX.4.10.9911091747280.3737-100000@hplx.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

David Sargeant wrote:
>Is there any way to modify the layout of the Appointment Book and Todo
>records?...

>But I'd like to add a "category" field so I could separate them into
>things like business, medical, car, etc.

The funny thing is that the internal format of the ADB file includes a
category field, which as far as I can tell is unused. It looks like it
was put there with the idea of a future enhancement that never
happened.

--=20
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 19:33:00 -0800
Reply-To:     Tim Shephard <tim.shephard@bigfoot.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tim Shephard <timshephard@EARTHLINK.NET>
Subject:      Off Topic: Networking Question
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit

I want to setup a network at home.  I am planning on running the cat5 wiring
out through my office closet upstairs, through the wall to the outside of
the house, down the side of the house to the first floor.  Then I will run
it in through the wall in the location of my sons computer.

The question is, can I use one of those surface mount 8 pin modular jacks at
radio shack to make the connections in the office and on the wall
downstairs?  Or will that mess up the network?

Thanks

-Tim
tim.shephard@bigfoot.com
tims.phone@bigfoot.com
http://www.bigfoot.com/~tim.shephard/tim/ha
eFax (508) 590-0302

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 20:47:47 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Appointment Book / Todo structures
In-Reply-To:  <TeEoOGAc8CGvLbCUs9Rg9VENzzdL@4ax.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 9 Nov 1999, Curtis Cameron wrote:

> The funny thing is that the internal format of the ADB file includes a
> category field, which as far as I can tell is unused. It looks like it
> was put there with the idea of a future enhancement that never
> happened.

Clearly we need an expert to write a .TSR program to add that to the
Appointment Book.  <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 21:57:34 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Fwd: Andreas Garzotto
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I recieved the following message on palmtop.net and figured that I would
forward to the list for Andreas and anyone else that may be able to help
him.

---------- Forwarded message ----------
Date: Fri, 5 Nov 1999 17:03:45 -0300
From: Dr Nachpitz Federico <fnachpitz@intramed.net.ar>
To: super@palmtop.net
Subject: Andreas Garzotto

I am a pleasant user of the publishing PalmTex!
Would I like preguntarlea Andreas Garzotto, if some file dictionary =
exists
of Spanish?
to make the Check Spelling in Spanish!

THANKS!

--- end of forwarded message ---


Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 09:51:35 -0600
Reply-To:     Maynard Riley <maynard@interaccess.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Maynard Riley <maynard@INTERACCESS.COM>
Subject:      Re: Appointment Book / Todo structures
Comments: To: Curtis Cameron <curtc@AIRMAIL.NET>
In-Reply-To:  <TeEoOGAc8CGvLbCUs9Rg9VENzzdL@4ax.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

On Tue, 9 Nov 1999 21:09:27 -0600, Curtis Cameron wrote:

>The funny thing is that the internal format of the ADB file includes a
>category field, which as far as I can tell is unused. It looks like it
>was put there with the idea of a future enhancement that never
>happened.

It might be useful for syncing with a database app however,
i.e. a .dbf on the desktop. I wonder if it translates 'both
ways', i.e. if the desktop database uses the ADB category
field, will it translate out to ADB and back again? Probably
depends upon the translator. I may try this with cpack.

        `~Maynard

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 10:39:58 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              JScheiner@01019FREENET.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Joerg Scheiner <JScheiner@01019FREENET.DE>
Subject:      Flexpad Version 3.0
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

You can download it at www.jps.net/flexpad/ or Library 11 of HPHAND forum

Joerg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 09:56:58 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jon Barrett <jonzann@ALTAVISTA.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jon Barrett <jonzann@ALTAVISTA.NET>
Subject:      Re: HPLX-L Digest - 9 Nov 1999
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>
> Date:    Tue, 9 Nov 1999 19:33:00 -0800
> From:    Tim Shephard <timshephard@EARTHLINK.NET>
> Subject: Off Topic: Networking Question
>
> I want to setup a network at home.  I am planning on running the cat5
wiring
> out through my office closet upstairs, through the wall to the
outside of
> the house, down the side of the house to the first floor.  Then I
will run
> it in through the wall in the location of my sons computer.
>
> The question is, can I use one of those surface mount 8 pin modular
jacks at
> radio shack to make the connections in the office and on the wall
> downstairs?  Or will that mess up the network?
>

You *Could* use them, but they're not likely to be CAT5. They might
support 10 Mbps, but 100 Mbps would be problematic. Since you'll be
wanting plenum cable anyway to go through walls, I'd suggest getting
the whole lot from somewhere like DataWarehouse division of
MicroWarehouse, or PC Connection.

Jon

Jon Barrett
Kensington, MD jonzann@altavista.net

Prepared on the last great HP portable - Omnibook 800
 (new products notwithstanding - bring back the Paw)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 09:41:52 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Word 5.5 vs. WP 5.1 on the palmtop
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Should I switch from Word 5.5 to WP 5.1 on my 200LX?

Except for a couple of years using WP on a Macintosh (which is a whole different
program) I've always used various versions of Word on both PCs and Macs.

One of the most important issues to me in a word processor is WYSIWYG
representation of how the document will look when it is printed.

Word on the palmtop shows character styles (bold, underline, italic, strike
through, small caps, double underline, superscript and subscript) represented
graphically on the editing screen. It does not show different fonts (i.e. Times,
Courier etc.) and it does not show different point sizes. The Print Preview
screen shows single or facing pages, but it does not allow you to zoom in and
actually read the text.

How does WP 5.1 do in these areas? Convince me!

Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 14:45:11 +0100
Reply-To:     furlan@gmx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Dr. Werner Furlan" <furlan@GMX.NET>
Organization: OE9FWV
Subject:      Re: We still need help
Comments: To: Stefan.Peichl@t-online.de
In-Reply-To:  <m11lLQq-0003CFC@fwd08.btx.dtag.de>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

-----BEGIN PGP SIGNED MESSAGE-----

hello Stefan,

On 10 Nov 99, at 2:16, Stefan Peichl wrote:

> Hence next test will use a capacitor. Any recommendations about
> the specification I should try to suppress 900Mhz and 1800Mhz?
>

try 1nF to GND on each lead of the Diode or a C with 1nF across the two
leads of the RX-Diode.
Did you identify the lead, through which the HF came into the receiver
circuit?

Werner


-----BEGIN PGP SIGNATURE-----
Version: PGP 6.0.2 -- QDPGP 2.60
Comment: http://community.wow.net/grt/qdpgp.html

iQEVAwUBOClo1iMwfGDxkN9XAQEs+gf/QV5FBkkTw/t9Lt8blCHELJsMyBJXoz+T
92Nojb9fZhT9Ro2JF9bBQqDJ+3SY13FQ/0NQW2GDZDtt28dSseByo5iteQ5RwX41
6bxvuggfZmcTmLQBKYFmi9aKRf1hua5dswFAKabpSaP2JquAjiBe6bhmERJk0GU9
n4/emK5CS56LlZ+CNWDCkzR9P5GFt+ajuug/rI6CKon18p2uQ6Zf7gH+FKBIy8w7
LixmshakdOJWUfcPwY57kjDyO/IxYbgrNWglnn8I77DoDTlrmE1LZ8VQaQ1m0qm+
cFLICXVYtpAyipFJhVpVDFVyNFx2VoVeC4QRBIpHtFfiQvkPtWmskg==
=WrGU
-----END PGP SIGNATURE-----

Thought for the day:
    Real newspaper headlines from US Papers:    Blow to head is common cause of brain injury
--
Dr. Werner Furlan
mailto:oe9fwv@vlbg.at (Dr. Werner Furlan)
Visit our Amateur Radio Homepage: http://www.oe9.at/oe9xrk/
Powered by Pegasus Mail: get it FREE at:
http://www.pegasus.usa.com or  http://www.let.rug.nl/pegasus/

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 08:43:58 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Cavendish, Lynn M" <CavendishLM@NAVAIR.NAVY.MIL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Cavendish, Lynn M" <CavendishLM@NAVAIR.NAVY.MIL>
Subject:      Re: HPLX-L Digest - 9 Nov 1999
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"

You wrote:

>>  For my money, the next LX-type palmtop doesn't need a colour screen but
a bigger one.

Or, for my money, a back-lit one.  The case could easily hold a screen 50%
larger, in terms of square inches.  That's a mod which would interest me.

I would even consider the back-lit solution if it also increased the area.
Obviously not talking about a change in resolution -- just bigger pixels.

Lynn

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 08:07:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      PalEdit Spanish dictionary,  Was:  Re: Fwd: Andreas Garzotto
Comments: To: jeffj@SCOTT.NET
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

To clarify the message:  he wants a Spanish spell checker for PalEdit.  I
once saw it on the net, but first the link was broken, then it
disappeared from the web.   It was part of the palmtop ring, which also
appears to have banished.  Anyone knows why the ring is gone?

Domingo

On Tue, 9 Nov 1999 21:57:34 -0600 Jeff Johns <jeffj@SCOTT.NET> writes:
> I recieved the following message on palmtop.net and figured that I
would
> forward to the list for Andreas and anyone else that may be able to
help
> him.
>
> ---------- Forwarded message ----------
> Date: Fri, 5 Nov 1999 17:03:45 -0300
> From: Dr Nachpitz Federico <fnachpitz@intramed.net.ar>
> To: super@palmtop.net
> Subject: Andreas Garzotto
>
> I am a pleasant user of the publishing PalmTex!
> Would I like preguntarlea Andreas Garzotto, if some file dictionary
> exists of Spanish?
> to make the Check Spelling in Spanish!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 07:58:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> >> I used my 95LX as a universal remote a lot<<
>
> My question; what software did you run on the 95LX in order to use it =
as a
> universal remote?

I used a shareware program called Remcom (for Remote Commander).  I =
believe I
downloaded it from Compuserve years ago.  I will try to locate a copy, =
but
don't hold your breath.  I quit using it years ago due to the poor range =
of the
100LX and 200LX IR ports.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 07:58:10 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: Appointment Book / Todo structures
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Is there any way to modify the layout of the Appointment Book and Todo
> records?  Today I was looking at the Todo and figured it would be an
> excellent method to keep a journal in,

This is how I use PIM.  I keep a journal with ToDo list items in it.  Try
downloading it from www.dasoft.com if you haven't already.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 13:48:24 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paco =?iso-8859-1?Q?L=F3pez?= <fll@CEC.JUNTA-ANDALUCIA.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paco =?iso-8859-1?Q?L=F3pez?= <fll@CEC.JUNTA-ANDALUCIA.ES>
Subject:      Spanish PE dictionary
In-Reply-To:  <199911100357.VAA23530x@scott.net>
Mime-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Regarding a recent post, there is an spanish dictionary for PalEdit in:
http://www.geocities.com/SiliconValley/Way/3028/Spanish.zip
It is not very complete but can be a starting point for your own
personalized one.
If someone has a better one, please let us, spanish users, know.

Saludos.

Paco L=F3pez.
________________________________________________________
Subprograma de Nuevas Tecnolog=EDas - DGEEFP - CEC - JA
Torretriana, 41071 Sevilla. Tel 954464939, Fax 954464863

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 11:35:08 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Requalifying members
Comments: To: MCHEM1@UCONNVM.UCONN.EDU
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Al,

>    Not sure if it really helps or not...I know it has deleted active
>    members who missed the CONFRIMATION REQUEST message, but I usually
>    pick up on those manually. The confirmation sysytem has been in
>    place from Day 1.

What about such a solution:

Why not send one message a month to the list

Subject: How you unsubscribe yourself
Text: If you want to unsubscribe yourself from the list, please do the
following: .......

That's one message per month that prevents maybe 3 other messages per
month 'unsucscribe' or 'please take me off your list' or similar ;-)

GTX
daniel


--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 09:34:46 -0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Brown, William" <wdlb5359@GLAXOWELLCOME.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Brown, William" <wdlb5359@GLAXOWELLCOME.CO.UK>
Subject:      1.2 Gb Type II PC Card
MIME-Version: 1.0
Content-Type: text/plain

<<<

From:   Christopher Allen SMTP:callen@efn.org
Sent:   Wednesday, November 10, 1999 1:54 AM
To:     wear-hard@haven.org
Subject:        Sandisk's 1.2 gig type II PC cards

(From the upping-the-ante-dept.)

This is kind of interesting. Sandisk has just announced it will be
shipping its 1.2 gig flash memory type II PC cards this month:
http://www.sandisk.com/pr/991101_256megabit.htm

Simple Technology has been talking about it's forthcoming 800 meg type II
PC cards since last April, IIRC. They have finally set a shipping window
of Q4-99:
http://www.simpletech.com/flash/ata.html

Strangely, Sandisk's new type II CF cards will only be 300 megs while
Simple's will be 320 megs.  !?!

pricing: $2/meg for OEMs (the press release didn't quote retail)


-Chris

--
Subcription/unsubscription/info requests: send e-mail with subject of
"subscribe", "unsubscribe", or "info" to wear-hard-request@haven.org
Wear-Hard Mailing List Archive (searchable): http://wearables.blu.org
>>>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 10:59:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Unsubscribe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hello

My ISP closed my Internetconnection for 6 days so I was unable
to unsubscribe automatically so to speak.

When I finally could connect there was 376 email waiting,not
so funny.

Is it possible to unsubscribe in another way than the above mentioned,that=
 is from another connection with another emailadress?

Lars Hedstrom/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 09:53:12 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Appointment Book / Todo structures
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

My ToDo looks like this (the number is the priority I set):

0 ---------- urgent and important ----------
1 pay the milkman
1 write invoice for Alex
1 write invoice for Marc
1 write offer for Andy
2 ---------- urgent ----------
3 buy bread
3
4 ---------- important ----------
5 bring car to service
5 check website xyz.com
6 ---------- not important ----------
7 check catalog abc
7 check website efg.com

The 0, 2, 4 and 6 are the headers. These numbers are not used as priorities,
so the headers remain always on the right place. Each day I decide, if a
tasks
priority changes on this day. Depending on the appointments, I have to
change
this. There was an article on www.palmtoppaper.com about this method.

Only urgent means, that it is _not_ important. Only important means, that it
is
_not_ urgent.

-----Original Message-----
From: David Sargeant <david@HPLX.NET>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Mittwoch, 10. November 1999 02:00
Subject: Appointment Book / Todo structures


>Is there any way to modify the layout of the Appointment Book and Todo
>records?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 09:32:06 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Free Accounting program (was - Re: DOS version of QuickBooks?)
Comments: To: Ed Keefe <emkeefe@USWEST.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

It is very flexible.
You can do single or double balancing.
It is more a question of the user interface.
It is _not_ the typical way of accounting in Switzerland.
-goe-


-----Original Message-----
From: Ed Keefe <emkeefe@USWEST.NET>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Dienstag, 9. November 1999 22:55
Subject: Re: Free Accounting program (was - Re: DOS version of QuickBooks?)


>the accountant at Thaddeus says that it has its own way of doing
>things--perhaps the way accounting is done in Switzerland. It's not the
kind
>of accounting he learned.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 09:27:02 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Free Accounting program (was - Re: DOS version of QuickBooks?)
Comments: To: Mike Schneider <mikeschn@AMERITECH.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Yes, it should. I used it a long time for my biz. I changed to the
Windows version later. Unfortunately the free DOS version
is not data compatible with the Windows version.
-goe-

-----Original Message-----
From: Mike Schneider <mikeschn@AMERITECH.NET>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Dienstag, 9. November 1999 22:30
Subject: Re: Free Accounting program (was - Re: DOS version of QuickBooks?)


>Is this something that should go on the Super page?
>
>> http://www.accsoft-ch.com/free.htm
>>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 09:14:11 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Compatible Parts Database
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

How about the hardware compatibility web-database
someone created some time ago? I was never able to get a result on this
interface (db.hplx.net). It seems, that the responsible person has no longer
time to
support it. Is there any need for a functional LX-hardware-database on the
web?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 09:11:38 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Fw: Arachne
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Arachne is OK even on the LX if you have to check some design stuff
(my work is webdesign and information architecture). Arachne displays
font related differences more exactly. But for the most
HTML stuff on the LX I use HV. It is the fastest HTML tool I know of.
I have e.g. the whole offline version of Jacob Nielsen (www.useit.com)
on my LX for reference. Using HV is the best solution for this.
If a website uses frames, there is already a usability problem. Frames
is one of the Top-Ten-Mistakes on the Internet.

-goe-

-----Original Message-----
From: Matthew W. Sheffield <mws722s@MAIL.SMSU.EDU>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Dienstag, 9. November 1999 20:17
Subject: Re: Fw: Arachne


>As others have said on the list, Arachne at present is not too efficient on
>the palmtop. It works great on my Win 98 desktop. I turn my machine on,
>choose Safe mode command prompt only and I'm on the Internet in about 10
>seconds as opposed to waiting, waiting, and waiting to get on in Windows.
>
>xChaos is also working on a Linux version too, fyi.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 22:52:13 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: PE/PIM possible new features
Comments: To: Paulo Custodio <Paulo.Custodio@SNAFU.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Paulo Custodio <Paulo.Custodio@SNAFU.DE> wrote:

> 1. Here in Europe it is quite common to define milestones as weeks,
> istead of dates (e.g. end of week 46, istead of November 19th).

Last I checked, Andreas lived in Europe, Switzerland, to be
exact. I checked last on Sunday October 31, 1999. We took a
walk together and talked at length in Zurich :-) ... I also
think he uses this convention. Therefore I believe it is built
into Pim/LX.

> 2. Is it possible/desireable that PE/PIM can be configured to use ISO
> standard date format (e.g. 1999-11-07)?

I see that Andreas answered to you on this. AFAIK he does not
post here publicly, nor reads the list anymore. BTW, I use
that format.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 22:52:18 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: PE/PIM wish list (Was  PE/PIM possible new features)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Thanks for the feedback on Pim/LX.

ITSUMI ken-ichi <amt@ITSUMI.KEN.ORG> wrote:

> >The two new features that I would like to see are:
> (snip)
> 1. I would like to display kanji (and edit kanji)

Hmmm... Doesn't PE support kanji already?

> 2. enjoy same software on other platforms like linux boxes seemlessly.

Lots of work for a freeware...

> 3. I would like to see or modify code.

Well, it is Andreas' code, but I rather doubt he will open the
code. Many reasons, some have to do with the nature of his
audience :-) But I cannot speak for him, only what I speculate
he will do.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 22:52:16 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Using 200LX as WWW browser
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Peniel Romanelli <peniel@WEB2000.NET> wrote:

> inline jpg and gif graphics.  HV (the browser part) allows use of
> multiple fonts.  You may have the occasional problem with some sites
> that act like anything except M$IE or Netscape are from the stone age,
> but this may be changed with the newest update of WWW/LX.  I have it,

It has not AFAIK. HV has not changed in a long time,
certainly not introduction of Java and/or Javascript support
which is what many of the "(HV) user hostile" webpages
contain.  HV simply does not support Java and Javascript.
Sorry.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 22:43:24 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Organization: Orion Enterprises
Subject:      Re: Anyone with Palm V?
Comments: To: rhemery@POWERUP.COM.AU
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="------------119FCDD2948C16EB47BE1BCA"

This is a multi-part message in MIME format.
--------------119FCDD2948C16EB47BE1BCA
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I use a Palm III for work (my 200lx for personal stuff) and found it
fairly easy to convert data by using the dump utility (whose name I
can't recall at the moment) from SUPER to convert the data to text and
then import it into the Palm Desktop software, then HotSync.  Worked
great.  You can also check on www.palm.com, www.hotfiles.com (ZDNet) and
on www.tucows.com; there is a program to aid in the conversion from
200lx to Palm.  I suppose if you search for 200lx on either of those
site for "200lx" you would probably find it, I think it's called
LX2Palm.  Good luck.

Regards,
Richard

==========================
Russell Hemery <rhemery@POWERUP.COM.AU> wrote:

Hi all

Apologies for the bandwidth.

My wife has jumped ship from the LX to Palm and wants me to (gulp) help
her
synch files etc from her LX.

I was wondering if anyone has one of these they want to sell? (spare)

Does anyone have experience using one?

Software needed?

Directions to a mailing list with palm content?

Please mail me off list

Thanks in advance

Russell

--------------119FCDD2948C16EB47BE1BCA
Content-Type: text/x-vcard; charset=us-ascii;
 name="rsmith.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Richard A. Smith / Patti Smith
Content-Disposition: attachment;
 filename="rsmith.vcf"

begin:vcard
n:Smith;Richard and Patti
x-mozilla-html:FALSE
org:Orion
adr:;;;;;;
version:2.1
email;internet:rsmith@enol.com
note;quoted-printable:aka, on eBay: seronac@auction.skytel.com=0D=0A*=0D=0A"Statistically, at least half of the people in the world are of below-average intelligence." * =0D=0A"If variety is the spice of life, then humor is the dessert." *
fn:Richard and Patti Smith
end:vcard

--------------119FCDD2948C16EB47BE1BCA--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 21:36:56 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              neill <neill@KEYWAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         neill <neill@KEYWAY.NET>
Subject:      Re: Storage Options
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>>Do these Calluna 240 MB type II drives work on the 110, HP LX?
>>BTW a 1 GB (type III) drive only cost $100 more.
>>>> I noticed today that Mobile Planet is advertising the Calluna Type

I seem to remember that they need 200+mah to work when writing. This would
seem to rule them out.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 21:14:09 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paul Kramer <flexpad@JPS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paul Kramer <flexpad@JPS.NET>
Subject:      Re: Flexpad 3.0
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Flexpad now has its own web page:  www.jps.net/flexpad/

I've also submitted 3.0 to Super but I guess they've not posted it yet.

Paul

> Where does one download this version, pray tell?  The latest version on
> the Super site is 2.4.
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 23:52:17 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jerry Johnson <jajohnso@NETUSA1.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jerry Johnson <jajohnso@NETUSA1.NET>
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Ferrite is a type of material, I believe it an iron oxide material, with
some other materials alloyed together to give it a high magnetic
permeability.  It is called a 'bead' because it has a hole in it.  (like a
string of beads in a necklace. )  It is simply slipped over the wire like a
bead on a necklace.  It acts as a low-pass filter by letting the low
frequencies pass and blocking high frequencies. If the inductor had too high
impedance value it might reduce the signal you wanted to use too.   I've
used ferrite beads on the supply lines to amplifiers to keep RF from
affecting the amplifiers, and to block RF on audio outputs.  If the 'noise'
was getting into the equipment thru these paths the beads worked well.  Does
anyone have a circuit schematic of that area of the LX, I'm not a 'pro' at
this, but I have several friends who are electronics engineers and they may
have some good ideas!
JJ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 13:52:16 +0200
Reply-To:     Rian Maartens <maartens@iafrica.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rian Maartens <maartens@IAFRICA.COM>
Subject:      Re: HisWord
Comments: To: Bob Meyer <bmeyer@UNION-TEL.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> I am sending the Online Bible manual. I also have spiral bound copies for
$5
> (ship in US).

Where are you sending it to?

Rian Maartens

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 20:51:19 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Fwd: Andreas Garzotto
In-Reply-To:  <199911100357.VAA23530x@scott.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 9 Nov 1999, Jeff Johns wrote:

> I recieved the following message on palmtop.net and figured that I
> would forward to the list for Andreas and anyone else that may be able
> to help him.

I already gave it to him and responded to the guy.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 10:03:36 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Flexpad Version 3.0
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Wed, 10 Nov 1999 10:39:58 -0500, Joerg Scheiner <JScheiner@01019FREENET=
.DE> wrote:

> You can download it at www.jps.net/flexpad/ or Library 11 of HPHAND =
forum

And as soon as I do the SUPER update this week it will be available on
SUPER.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 17:03:05 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: Bruce_Martin@MANULIFE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>Word on the palmtop shows character styles (bold, underline, italic, strike
>through, small caps, double underline, superscript and subscript)
represented
>graphically on the editing screen. It does not show different fonts (i.e.
Times,
>Courier etc.) and it does not show different point sizes. The Print Preview
>screen shows single or facing pages, but it does not allow you to zoom in
and
>actually read the text.
>
>How does WP 5.1 do in these areas? Convince me!


The character styles of Word are shown on the palmtop CGA-screen?
WP does this only with a screen beginning at EGA.
The print preview of WP is definitely better. You can zoom in to 200% and
even
read the text at 100%. With 100% you see the area from left to right margin
and
can scroll down. The print preview is seen on the URL:
http://www.goeldi.com/lx/

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 10:25:25 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Fwd: Andreas Garzotto
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 9 Nov 1999 20:51:19 -0800, David Sargeant <david@HPLX.NET> wrote:

> I already gave it to him and responded to the guy.

'E' for effort <g, then smack self>.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 10:16:16 -0600
Reply-To:     jhope@enoinc.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "ENOINC - John S. Hope" <jhope@ENOINC.COM>
Subject:      Re: 1.2 Gb Type II PC Card
Comments: To: "Brown, William" <wdlb5359@GLAXOWELLCOME.CO.UK>
In-Reply-To:  <950F2CFCC55AD211A4750000F845B143019C8065@ukz249.ggr.co.uk>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

RE: CF size.  I know by experience that Simple inflates their CF sizes as a
marketing ploy.  For example, the 128MB CF from Simple is really 110MB.  The
Simple CFs are called 90% IDE drives (their words, not mine).  Formatting,
MBR, etc take up space but not 14% of the drive.  This has been verified
with Simple.

My experience with Sandisk is the opposite.  That is, they have a 100% IDE
drive and the size is reduced by the correct amount for formatting, etc.

This will explain the 300 vs. 320 comment.

-----Original Message-----
From: HPLX Mailing List mailto:HPLX-L@UCONNVM.UConn.EduOn Behalf Of
Brown, William
Sent: Wednesday, November 10, 1999 3:35 AM
To: HPLX-L@UCONNVM.UConn.Edu
Subject: 1.2 Gb Type II PC Card


<<<

From:   Christopher Allen SMTP:callen@efn.org
Sent:   Wednesday, November 10, 1999 1:54 AM
To:     wear-hard@haven.org
Subject:        Sandisk's 1.2 gig type II PC cards

(From the upping-the-ante-dept.)

This is kind of interesting. Sandisk has just announced it will be
shipping its 1.2 gig flash memory type II PC cards this month:
http://www.sandisk.com/pr/991101_256megabit.htm

Simple Technology has been talking about it's forthcoming 800 meg type II
PC cards since last April, IIRC. They have finally set a shipping window
of Q4-99:
http://www.simpletech.com/flash/ata.html

Strangely, Sandisk's new type II CF cards will only be 300 megs while
Simple's will be 320 megs.  !?!

pricing: $2/meg for OEMs (the press release didn't quote retail)


-Chris

--
Subcription/unsubscription/info requests: send e-mail with subject of
"subscribe", "unsubscribe", or "info" to wear-hard-request@haven.org
Wear-Hard Mailing List Archive (searchable): http://wearables.blu.org
>>>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 11:35:48 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      ADMIN: Re: Unsubscribe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Wed, 10 Nov 1999 11:21:49 -0500 (EST)

OK, first my apologies to the 700 or so of you this doesn't apply to.

- there are 4 ways to subscribe / unsubscribe / modify your
subscription to HPLX-L

1) send a message directly to the LISTSERV as described in the WELCOME
message (you know, the one that was sent when you subscribed to the
HPLX-L...that said DO NOT DELETE). You need to send that message from
the account you are subscribed from. This will get the quickest
results.

2) fill out the form on http://www.sp.uconn.edu/~mchem1/HPLX.shtml (aka
list.hplx.net). I process these requests manually, so it may take a
while, but usually not more than a few hours.

3) send ME <mchem1@uconnvm.uconn.edu> NOT THE HPLX-L!
<hplx-l@uconnvm.uconn.edu> a message and I will process your request
ASAP

4) call me on the phone (860)486-6126 and will process your
request. If you lose your internet connection...this is your only
alternative.

22m43s ago ...
On Wed, 10 Nov 1999, Lars Hedstroem wrote:

> Hello
>
> My ISP closed my Internetconnection for 6 days so I was unable
> to unsubscribe automatically so to speak.
>
> When I finally could connect there was 376 email waiting,not
> so funny.
>
> Is it possible to unsubscribe in another way than the above mentioned,th=
at
>  is from another connection with another emailadress?
>
> Lars Hedstrom/Sweden
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 10:24:02 -0600
Reply-To:     jhope@enoinc.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "ENOINC - John S. Hope" <jhope@ENOINC.COM>
Subject:      EXTERNAL MONITOR / KEYBOARD
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Hello,

Has anyone worked out a solution set connect an external monitor and
keyboard to the 200LX?

Thanks....

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 12:07:47 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: word 5.1/5.5
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

> Just wondering where word 5.1 or 5.5 are available.  The built-in memo
> feature is cumbersome and doesn't export to my Mac very well.
>
I don't believe there is a Word version 5.1, and Word version 5.0 apparently is
not Y2K compliant.

Word 5.5 for DOS (English version) can be downloaded by clicking on the
"Continue Download" link on this page:
http://officeupdate.microsoft.com/Articles/word55eula.htm

Word 5.5 for DOS (International English version) can be downloaded directly from
 here:
http://officeupdate.microsoft.com/isapi/gooffupd.asp?TARGET=/downloaditems/Wd55_ben.exe

I am not sure what the difference is between these two versions.

Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 10:54:40 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Kopplin <kopplin@TECHNOIR.NU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Kopplin <kopplin@TECHNOIR.NU>
Subject:      WWW/LX and local network
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

I was lying in bad last night, using HV and WWW/LX to do a little last
minute research on dejanews before going to sleep when it occurred to me I
had never tried browsing my home network. Well, it didn't work.

I have browsed the local net at work so I was a little surprised. FTP/LX
and TELNET/LX also refused to work at home when trying to connect locally.
Remote sites work ok. My config for home or work is the same, just
different ips for My_IP, Peer_IP and DNS_IP.

I also use LXFTP and LXTELNET (from LXTCP) and they work fine locally
and remotely, so I don't believe it's a problem with my home network.

Any ideas?

Mike Kopplin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 10:55:31 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Unsubscribe
Comments: To: Lars Hedstroem <nxw988e@TNINET.SE>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

The HPLX-L website (on the sig line) has a subscribe/unsubscribe entry form, on
which you also enter your email address and comments.  So it should be possible
to unsubscribe from another email address and include an explanation to Al
maybe.

I'll confess as a longtime member, that I haven't tried it myself.

Failing that, an email to Al should do it also (from his website:  Al Kind:
MCHEM1@UCONNVM.UCONN.EDU)

- Longden





Lars Hedstroem <nxw988e@TNINET.SE> on 11/10/99 07:59:06 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Lars Hedstroem <nxw988e@TNINET.SE>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Unsubscribe




My ISP closed my Internetconnection for 6 days so I was unable
to unsubscribe automatically so to speak.

When I finally could connect there was 376 email waiting,not
so funny.

Is it possible to unsubscribe in another way than the above mentioned,that is
from another connection with another emailadress?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 11:06:56 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Requalifying members
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

I know it grates on some people's nerves, but the occasional "unsubscribe me"
request doesn't bother me so much anymore.

There was a time when a lot of WinCE people were stumbling into our midst and
barely got out with their lives, and the flurry of unsubscribes then was more of
a nuisance, but even so was just a mild noise against the flames they were
getting.

I personally don't this is a problem worth fixing, and would like us to just get
along with the subscription-challenged.  The questionaire suggestion I made
earlier was just a light-hearted proposal.

- Longden





Daniel Hertrich <d.hertrich@GMX.DE> on 11/10/99 03:35:08 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Daniel Hertrich <d.hertrich@GMX.DE>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: Requalifying members




Hi Al,

>    Not sure if it really helps or not...I know it has deleted active
>    members who missed the CONFRIMATION REQUEST message, but I usually
>    pick up on those manually. The confirmation sysytem has been in
>    place from Day 1.

What about such a solution:

Why not send one message a month to the list

Subject: How you unsubscribe yourself
Text: If you want to unsubscribe yourself from the list, please do the
following: .......

That's one message per month that prevents maybe 3 other messages per
month 'unsucscribe' or 'please take me off your list' or similar ;

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 20:13:25 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: PE/PIM possible new features
Comments: To: A Meshar <sponsor@FTEL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>I see that Andreas answered to you on this. AFAIK he does not
>post here publicly, nor reads the list anymore. BTW, I use
>that format.


<hysterical panic>

WHY!!!

</hysterical panic>

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 20:17:33 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: WWW/LX and local network
Comments: To: Mike Kopplin <kopplin@TECHNOIR.NU>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Is there something like "no-proxy-for" in WWW/LX?
This problem is common in Netscape, when you forget to set the
"no-proxy-for" your home domain.

-goe-


-----Original Message-----
From: Mike Kopplin <kopplin@TECHNOIR.NU>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Mittwoch, 10. November 1999 18:59
Subject: WWW/LX and local network


>I was lying in bad last night, using HV and WWW/LX to do a little last
>minute research on dejanews before going to sleep when it occurred to me I
>had never tried browsing my home network. Well, it didn't work.
>
>I have browsed the local net at work so I was a little surprised. FTP/LX
>and TELNET/LX also refused to work at home when trying to connect locally.
>Remote sites work ok. My config for home or work is the same, just
>different ips for My_IP, Peer_IP and DNS_IP.
>
>I also use LXFTP and LXTELNET (from LXTCP) and they work fine locally
>and remotely, so I don't believe it's a problem with my home network.
>
>Any ideas?
>
>Mike Kopplin
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 20:38:07 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Karlheinz Juenemann <Karlheinz_Juenemann@MAGICVILLAGE.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Karlheinz Juenemann <Karlheinz_Juenemann@MAGICVILLAGE.DE>
Subject:      unsubscribe


** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 13:47:01 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: unsubscribe
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

Horribly ironic, isn't it?  <g>

Steve

        -----Original Message-----
        From:   Karlheinz Juenemann
SMTP:Karlheinz_Juenemann@MAGICVILLAGE.DE
        Sent:   Wednesday, November 10, 1999 11:38 AM
        To:     HPLX-L@UCONNVM.UConn.Edu
        Subject:        unsubscribe


        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 15:09:32 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: WORD 5.5: File conversion from OFFICE 97
Comments: To: Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Winfried,

> "Microsoft offers a free utility, WDSUPCNV.EXE, that adds
> extra file converion features to Office 97 and allows
> documents to be saved in Word 5.x and other less-used
> formats."
>
> I have searched the Microsoft site and cannot find it t
> here.
> Could somebody help ?

I do not bother translating WINWORD doc's. You should be able to read them in
WORD 5.5. The formatting garbage of header and footer info is at the beginning
and at the end of the file. You can easily mark and delete that.

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 12:12:47 PST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MARK LARSON <markl@HPCVNRX1.CV.HP.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         MARK LARSON <markl@HPCVNRX1.CV.HP.COM>
Subject:      TCP/IP on the 200LX

I am looking for a way to install TCP/IP on my 200lx.  I want to talk to some
Unix servers and NT Servers over a LAN connection.
Can anyone point me to some information on how to install TCP/IP on the 200lx?
I only want TCP/IP to work with an Ethernet Network Card. (not IPX,etc)

Thank you,
Mark

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 13:13:17 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Kopplin <kopplin@TECHNOIR.NU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Kopplin <kopplin@TECHNOIR.NU>
Subject:      Re: TCP/IP on the 200LX
Comments: To: MARK LARSON <markl@HPCVNRX1.CV.HP.COM>
In-Reply-To:  <199911102012.MAA01450@hpcvnrx1.cv.hp.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

http://lxtcp.hplx.net

On Wed, 10 Nov 1999, MARK LARSON wrote:

> I am looking for a way to install TCP/IP on my 200lx.  I want to talk to some
> Unix servers and NT Servers over a LAN connection.
> Can anyone point me to some information on how to install TCP/IP on the 200lx?
> I only want TCP/IP to work with an Ethernet Network Card. (not IPX,etc)
>
> Thank you,
> Mark
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 13:16:28 -0700
Reply-To:     Mike Kopplin <kopplin@technoir.nu>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Kopplin <kopplin@TECHNOIR.NU>
Subject:      Re: WWW/LX and local network
In-Reply-To:  <005d01bf2bb1$1e762c10$ca22fed4@thinkpad760ed>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Not that I can find in the documentation. I'm not using a proxy however,
at work, or home.

I was wondering if it could be that I'm using the reserved ip range of
192.168.1.x in my home net. What I have in my config is:

My_IP   = 192.168.1.7 the LX with wwwlx on it
Peer_IP = 192.168.1.1 my gateway
DNS_IP  = 192.168.1.1    which is also acting as a caching DNS


> Is there something like "no-proxy-for" in WWW/LX?
> This problem is common in Netscape, when you forget to set the
> "no-proxy-for" your home domain.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 15:21:26 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Fluff:Re: unsubscribe
Comments: To: Steve Dowell <sdowell@HARRAHS.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Wed, 10 Nov 1999 15:20:37 -0500 (EST)

AAAARRRRRGGGG!!!

33m36s ago ...
On Wed, 10 Nov 1999, Steve Dowell wrote:

> Horribly ironic, isn't it?  <g>
>
> Steve
>
>         -----Original Message-----
>         From:   Karlheinz Juenemann
> SMTP:Karlheinz_Juenemann@MAGICVILLAGE.DE
>         Sent:   Wednesday, November 10, 1999 11:38 AM
>         To:     HPLX-L@UCONNVM.UConn.Edu
>         Subject:        unsubscribe
>
>         ** HPLX-L LIST Info at
> http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 14:31:03 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Question about Buddy
MIME-version: 1.0

On 1999-11-07 Vic said:
   >I was not aware that this was happening. If this happens with
   >Nettamer, it must also happen when I use WWW/LX and call PE to
   >edit a message. Yet d-click and other functions seem to still
   >work in PE. Which Buddy features are you trying to use when
   >you shell to DOS?
   >I just tested this with Nettamer palmtop using PE as my editor,
   >and Buddy still seems to be active. Which editor are you using?

I had originally noticed this problem with the RED editor that comes with
Nettamer, but since I've switched over to using PE, the problem has gone
away.  Not quite sure what caused it originally, since I've been unable to
reproduce it.  Thanks for checking.


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 14:31:08 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Word on the palmtop
MIME-version: 1.0

On 1999-11-07 Ain Vale said:

   >I always used WordPerfect in the past, and found it to be perfectly
   >satisfactory after some time spent learning its quirks. However,
   >Word is what we use here at the office, and so I've spent a lot of
   >time lately on the Microsoft product. I think that either program
   >will be sufficient for all but the most maniacal of power users,
   >and hey those people aren't using palmtops for their word
   >processing anyway.
   >The bottom line, though, if it's the truth you want, is that I am a
   >hopeless cheapskate and Word 5.5 for DOS is free on the web.  End of
   >story.

That is one compelling argument.  However, since PE is also free and it
meeds most of my needs (and all my needs for the palmtop), I think I'll
stick with it for now.  Just of curiousity, though--how much filespace
is Word 5.5 for DOS?


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 14:31:14 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Using 200LX as WWW browser
Comments: To: peniel@web2000.net
MIME-version: 1.0

On 1999-11-07 peniel@web2000.net said:

   >I've been using WWW/LX since it came out.  It works very well for
   >finding info on the web.  Inline graphics can be switched off for
   >speed.  It handles frames like Lynx does - it shows a list of
   >frames on the page, and links to your choice.  If used with LXPIC,
   >it can show inline jpg and gif graphics.  HV (the browser part)
   >allows use of multiple fonts.  You may have the occasional problem
   >with some sites that act like anything except M$IE or Netscape are
   >from the stone age, but this may be changed with the newest update
   >of WWW/LX.  I have it, but haven't tried any of the hostile sites
   >lately.

It surely sounds that WWW/LX allows me to do what I want to do with the
200LX when I travel.  I'm going to have to probably make it part of my
"upgrade Christmas present" to myself.  Thanks for this detailed
comparison--it's exactly what I was looking for.

   >BTW - I see you're using NetTamer 1.11   How do you like that
   >release? I haven't used this since 1.08 - when I switched to WWW/LX.

For what it does, Nettamer is superb.  It allows me to run the same email
package on both my desktop and palmtop.  It's supremely functional and
powerful.  Indeed--your post reminds me it's time to register this program.
I had surgery this last week, which has kind of put a spin on my planned
activities.  This version works great on both the desktop and palmtop.  I
highly recommend it.



Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 14:33:47 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: MS Word
Comments: cc: S_Carder@COMPUSERVE.COM
MIME-version: 1.0

Stephen Carder stated that:

   >The transcriptionists in our medical office all still use WP 5.1.
   >We recently had a "scare" when someone tried to convince them that
   >they should switch to Word for Office97 because it is Y2K compliant.
   >I did some checking and WP 5.1 for DOS will work fine for our
   >purposes after Jan 1st.  So, they will continue to run WP 5.1 on
   >"ancient" 486 computers for a long time to come <g>.
   >I know this isn't exactly palmtop related, but the basic concept of
   >retaining a proven technology that works rather than getting the
   >"newest and best" is very relevant.

Indeed, especially when the proven technology is *better* than the "newest
and the best".  When one finds software that works as well as WP 5.1 does,
the glamour of Word for Windows fails to impress.  My brother-in-law just
completed his dissertation in MS Word.  Along the way he lost a total of
several weeks work due to Windows crashes and inadequate backups.  When I
showed him my various papers for college, all completed in WP5.1, that
loooked as professionally formatted as his dissertation, he was astonished.
When you find a product that *works* supremely well--newer and better
doesn't have much meaning.


Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 22:01:38 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Alarmclock for hp200?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

I want to have a alarmclock where I can insert multipple alarms. The
Hpalarm (exm) is a good program, but I would like to set more alarms than
just one.

I can of course use Appt.. I now use the built in Stopwatch alarm and
Hpalarm to have two alarms going at different times. But I would like to
be able to set more alarm..

Is there any applications out there that can do this? And have the look
of Hpalarm.exm?

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 15:20:46 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Time Tracking...
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

I was looking at a time tracking program that I got from SUPER called
TimeStax. Nice little program, and it seems to do all the stuff I need.
It even has a nifty 'timer' function that lets me start and stop timers
on the various projects I work on through out the day. Does reports
pretty nicely too.

However, I decided to Y2K test it. I tried keying in a date of  01/01/00
and it wouldn't take it. Bummer.

Does anyone have suggestions for a DOS time tracking program (preferably
free) that you know is Y2K compliant? Also, I'd really like to find one
that has that 'timer' feature.

I know some of you will suggest TimeTracker/LX (and I may end up going
with that), but I'd like to check out some free ones first.

Suggestions?

TIA,
Steve

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 21:59:29 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Requalifying members
Comments: To: Longden_Loo@CANDLE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I personally don't think this is a problem worth fixing, and would
> like us to just get along with the subscription-challenged.

I agree.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 17:09:17 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: Word on the palmtop
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

> That is one compelling argument.  However, since PE is also free and it
> meeds most of my needs (and all my needs for the palmtop), I think I'll
> stick with it for now.  Just of curiousity, though--how much filespace
> is Word 5.5 for DOS?
>
My installation of Word 5.5 on my 200LX takes up 1.64 Mb.

That includes the spell checker, thesaurus, hyphenation dictionary, on-line help
files, standard glossary and style sheet, graphic screen driver and 5 different
printer drivers -- 15 files in total.

How big is WP 5.1?

Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 17:30:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Larry Feldman <lfeldman@USA.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Larry Feldman <lfeldman@USA.NET>
Subject:      Speed Reading Software
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I seem to recall a question some time ago about what speed reading
packages, if any, which might run on the palmtop. I've recently been
playing with such a package, and thought I'd pass along the results.

The package in question is the "Evelyn Wood Dynamic Reader" - a package
which was published years ago by Timeworks. The software seems to run
fine on my single speed 200LX. I've managed to replace the "on disk"
exercise files, with my own, by reformatting plain text to 55 columns.
The program has the ability to display this text, full screen or in a
scrolling window, at increasing speeds. The LCD screen seems to have
no problem "keeping up" - which had been my one concern.

So, if anyone is interested in practicing your speed reading (I took
the course years ago), and if you can locate this package, it's a good
alternative.

Larry

----------------------------------------------------------------
LFeldman@USA.net
Listowner: Submini-L: The Subminiature Photography Mailing List

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 17:45:11 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>> Word on the palmtop shows character styles (bold, underline, italic, strike
>> through, small caps, double underline, superscript and subscript) represented
>> graphically on the editing screen. It does not show different fonts (i.e.
Times,
>> Courier etc.) and it does not show different point sizes. The Print Preview
>>
> The character styles of Word are shown on the palmtop CGA-screen?
> WP does this only with a screen beginning at EGA.
>
Yes, Word 5.5 in Graphic mode shows the above character styles on the editing
screen. In Text mode it just represents different styles by reverse, blinking
type etc.

For that matter, even old MS-Works 2.0 shows bold, underline, italic,
strikethrough, superscript and subscript in Graphic mode. I don't know if Works
2.0 is Y2K compliant, though.

Does anybody know where I can get a copy of Works 3.0 or whatever the last DOS
version was?

Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 22:54:24 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Question about Buddy
Comments: To: David Ball <dmb10@SWBELL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

>    >I was not aware that this was happening. If this happens with
>    >Nettamer, it must also happen when I use WWW/LX and call PE to
>    >edit a message. Yet d-click and other functions seem to still
>    >work in PE. Which Buddy features are you trying to use when
>    >you shell to DOS?
>    >I just tested this with Nettamer palmtop using PE as my editor,
>    >and Buddy still seems to be active. Which editor are you using?
>
> I had originally noticed this problem with the RED editor that comes with
> Nettamer, but since I've switched over to using PE, the problem has gone
> away.  Not quite sure what caused it originally, since I've been unable to
> reproduce it.  Thanks for checking.

I wonder if perhaps the Fn-l or some other Fn-? is being accidently
pressed which might turn off certain buddy functions.  I've accidently
done this while using TSE (qedit) and found that I could not re-invoke
those buddy functions while still in the editor.  Meaning I could
accidently turn off d-click or smartcaps from the editor but not turn it
back on while still in the editor.  And the accidental Fn-? was instead
of hitting an Alt-? sequence - in other words a typo.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 22:54:26 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Alarmclock for hp200?
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I want to have a alarmclock where I can insert multipple alarms. The
> Hpalarm (exm) is a good program, but I would like to set more alarms than
> just one.
>
> I can of course use Appt.. I now use the built in Stopwatch alarm and
> Hpalarm to have two alarms going at different times. But I would like to
> be able to set more alarm..

Just jumping in since the subject leads to questions and possibly a
discussion.  Why not use the appt function?  I've had the HP's forever
now (G) and have only once used the stopwatch/alarm (more as a test than
anything useful! (G)) always using the appt function.   I guess that
there is no countdown type "warn me in 45 minutes" but find the appt
does about everything needed even if I do have to do my own math to get
a 30 or 50 minute warning.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 16:02:42 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
In-Reply-To:  <85256825.0050BB1B.00@MLILHUB01@manulife.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 10 Nov 1999, Bruce Martin wrote:

> Word on the palmtop shows character styles (bold, underline, italic,
> strike through, small caps, double underline, superscript and
> subscript) represented graphically on the editing screen. It does not
> show different fonts (i.e. Times, Courier etc.) and it does not show
> different point sizes. The Print Preview screen shows single or facing
> pages, but it does not allow you to zoom in and actually read the
> text.

How does it manner to show bold and italic and strikethrough?  Does it use
graphics mode or something?  WP51 uses text mode and represents these
modes (italic, etc.) as colors, which don't show up well on the palmtop
screen.  Print Preview shows you what it looks like, though.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 17:00:13 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Appointment Book / Todo structures
In-Reply-To:  <199911101258.HAA03816@hpdmraaa.compuserve.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 10 Nov 1999, Steve Carder wrote:

> This is how I use PIM.  I keep a journal with ToDo list items in it.
> Try downloading it from www.dasoft.com if you haven't already.

I'd rather use the built-in appointment book, but PIM is pretty useful.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 17:01:10 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: 1.2 Gb Type II PC Card
In-Reply-To:  <LOBBJHJCDIPKBKMLNMPHMEBDCFAA.jhope@enoinc.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 10 Nov 1999, ENOINC - John S. Hope wrote:

> RE: CF size.  I know by experience that Simple inflates their CF sizes
> as a marketing ploy.  For example, the 128MB CF from Simple is really
> 110MB.  The Simple CFs are called 90% IDE drives (their words, not
> mine).  Formatting, MBR, etc take up space but not 14% of the drive.
> This has been verified with Simple.

Uh, my 40MB Simple Tech card was well over 40,000,000 bytes in size.
Unless you are saying they just started doing this with CF cards.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 01:55:27 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: We still need help
Comments: cc: garzotto@acm.org
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Dr. Werner Furlan wrote:

> Did you identify the lead, through which the HF came into the receiver
> circuit?

No, I'm not sure if it comes through the leads. Unsoldering the
receiving photo diode didn't change anything. So I guess it's
not the leads?

> > Hence next test will use a capacitor. Any recommendations about
> > the specification I should try to suppress 900Mhz and 1800Mhz?
>
> try 1nF to GND on each lead of the Diode or a C with 1nF across the two
> leads of the RX-Diode.

I tried 6 different capacitors:

1pF, 10pF, 100pF, 330pF, 1nF, 100nF

I tried them across the leads and to the GND. The first 5 had
no effect. But the 100nF really made it worse: The error rate
almost doubled. It seems to have some effect, but in the wrong
direction :-(

I also noticed, that touching any of the two capacitor's contacts
with my hands increases the error rate dramatically! Why is that?

Any other test ideas?

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 15:03:43 -1000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Graham <bgraham@HAWAII.RR.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Graham <bgraham@HAWAII.RR.COM>
Subject:      Re: Morphy one
Comments: To: ITSUMI ken-ichi <amt@ITSUMI.KEN.ORG>,
          Hal Goldstein <hal@thaddeus.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Ken - I have followed what you guys in Japan have done with the HP200LX for a number of years, and I've been amazed. One question I have about "Morphy one" is what built in software is planed for it? My main concerns are to have a Calendar/To-do program like the HP200LX and a data base engine like the HP200LX. Most of the other software I need can be aquired if "Morphy one"
is a DOS machine.

Please pass this on to the developers.


> Date:    Sun, 7 Nov 1999 22:41:37 +0900
> From:    ITSUMI ken-ichi <amt@ITSUMI.KEN.ORG>
> Subject: Morphy one
>
> Hi all LXers and Linuxers
>
> If you read japanese, check urls shown below
>
> http://member.nifty.ne.jp/toyozou/palmpc/release.html
> http://www.mobilenews.ne.jp/news/1999/11/0101pda.html
>
> A Japanese user comunity is building new PDA, which has
>    GPLed hardware Design
>    same form factor as HP1200lx and same KBD
>    AMD elan (=486SX) 4-66MHz
>    32MB Main memory
>    CF Type II x 2
>    CGA mono chrome(640x200) (Future plan will includes backlight)
>    boot DOS or Linux from CF
>    Work 10-20 h with 2 AA Battery
>    May add hardware daughter board
>    >= 80,000 yen
>
> and freely join  into Development Group to bend spec. along with your tasete!
> They plan to release it within Feb 2000.
>
> ken

Hal - Are you keeping abreast of this?

Aloha - bob      \ooo_

--
        -------
<http://home.hawaii.rr.com/bgraham/>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 10:09:39 +0800
Reply-To:     J H Chin <jhchin@nihonsekkei.com.sg>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         J H Chin <jhchin@NIHONSEKKEI.COM.SG>
Subject:      Unsubscribe
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----=_NextPart_000_0161_01BF2C2C.DDA192C0"

This is a multi-part message in MIME format.

------=_NextPart_000_0161_01BF2C2C.DDA192C0
Content-Type: text/plain;
        charset="gb2312"
Content-Transfer-Encoding: quoted-printable



------=_NextPart_000_0161_01BF2C2C.DDA192C0
Content-Type: text/html;
        charset="gb2312"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>

<META content=3Dtext/html;charset=3Dgb2312 http-equiv=3DContent-Type>
<META content=3D'"MSHTML 4.72.3110.7"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>&nbsp;</DIV></BODY></HTML>

------=_NextPart_000_0161_01BF2C2C.DDA192C0--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 02:26:32 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

re: word font display

> How does it manner to show bold and italic and strikethrough?  Does it use
> graphics mode or something?  WP51 uses text mode and represents these
> modes (italic, etc.) as colors, which don't show up well on the palmtop
> screen.  Print Preview shows you what it looks like, though.

Yup, it uses the cga GRAPHIC "adapter" of the HP to display it.  I don't
really use it but it can be done from within Word 5.0 (probably 5.5,
too)  I usually work in the text mode if I use Word 5.0 on the palmtop.

I generally use TSE (qedit) on the HP.

I do still predominantly use Word 5.0 for Dos on all of my desktops for
most of my job writing (with occasional bouts of TSE/qedit) - I let my
secretary worry about making it Winword when she imports it! (G)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 02:26:55 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Morphy one
Comments: To: Bob Graham <bgraham@HAWAII.RR.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Ken - I have followed what you guys in Japan have done with the
HP200LX for a number of years, and I've been amazed. One question I have
about "Morphy one" is what built in software is planed for it?

Excellent question.  I, personally, would be lost without the built-in
PIM stuff, particularly the appt application.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 21:07:26 -0500
Reply-To:     theise@netins.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Theodore Heise <theise@NETINS.NET>
Subject:      Re: Word on the palmtop

Bruce Martin writes:
> My installation of Word 5.5 on my 200LX takes up 1.64 Mb.
>
> That includes the spell checker, thesaurus, hyphenation dictionary, on-line help
> files, standard glossary and style sheet, graphic screen driver and 5 different
> printer drivers -- 15 files in total.
>
> How big is WP 5.1?

Installed on my 200LX, WP 5.1 is about 1.8M with thesaurus, spell
check, and several printer drivers.  This is without help installed,
I'm not sure how much it takes.

Ted

--
Theodore Heise     <theise@netins.net>     West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 22:37:36 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Fluff: Re: 1.2 Gb Type II PC Card
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Wed, 10 Nov 1999 22:23:02 -0500 (EST)

My "48MB" SanDisk CF reads 47941632 bytes (by CHKDSK)

My "32MB" TDK CF reads 3216588 bytes

   ? Is 1MB 1,024,000 bytes or 1,048,576 bytes? (if I could only
   remember back to my 1st Comp Sci course nn years ago ;-)



02h21m52s ago ...
On Wed, 10 Nov 1999, David Sargeant wrote:

> On Wed, 10 Nov 1999, ENOINC - John S. Hope wrote:
>
> > RE: CF size.  I know by experience that Simple inflates their CF =
sizes
> > as a marketing ploy.  For example, the 128MB CF from Simple is really
> > 110MB.  The Simple CFs are called 90% IDE drives (their words, not
> > mine).  Formatting, MBR, etc take up space but not 14% of the drive.
> > This has been verified with Simple.
>
> Uh, my 40MB Simple Tech card was well over 40,000,000 bytes in size.
> Unless you are saying they just started doing this with CF cards.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 20:44:40 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Kopplin <kopplin@TECHNOIR.NU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Kopplin <kopplin@TECHNOIR.NU>
Subject:      Re: WWW/LX and local network
In-Reply-To:  <Pine.LNX.3.96.991110130134.7319E-100000@dewey.technoir.nu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

According to the firewall logs on my gateway, all the traffic for the
localnet (192.168.1.2 -8) is being sent to the default gateway for
delivery outside instead of the appropriate system.


> I was wondering if it could be that I'm using the reserved ip range of
> 192.168.1.x in my home net. What I have in my config is:
>
> My_IP   = 192.168.1.7 the LX with wwwlx on it
> Peer_IP = 192.168.1.1 my gateway
> DNS_IP  = 192.168.1.1    which is also acting as a caching DNS

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 19:53:11 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

F. Kaufman wrote:
>
> > Ferrite beads are pieces of ferrite of various shapes but having a hole i
>
> > filtering means after having introduced a very well referenced shielding,
> > providing somehow a global protection, and quantified its efficiency.
>
> Now that I think about it, my old Osborne was painted inside with some
> kind of "shielding" "paint."   Is there some form of liquid paint that
> could be use to coat the inside (outside but not pretty) of the hp to
> provide protection?

Copper and other conductive paints exist, but if sheet metals aren't
solving the problem, I suspect these aren't going to solve it either!

Might help, though.

  Mark

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 22:37:21 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: HisWord
Comments: To: maartens@iafrica.com
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Tue, 9 Nov 1999 13:52:16 +0200 Rian Maartens <maartens@IAFRICA.COM>
writes:
> > I am sending the Online Bible manual. I also have spiral bound
> copies for $5 (ship in US).
>
> Where are you sending it to?

To me as a zip file (he already did), but I suppose it might be of
interest to others enough to go on SUPER (unless Tom can find time to
post it on his site).

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 22:40:55 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Spanish PE dictionary
Comments: To: fll@CEC.JUNTA-ANDALUCIA.ES
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Wed, 10 Nov 1999 13:48:24 +0100 Paco =?iso-8859-1?Q?L=F3pez?=
<fll@CEC.JUNTA-ANDALUCIA.ES> writes:
> Regarding a recent post, there is an spanish dictionary for PalEdit
in:
> http://www.geocities.com/SiliconValley/Way/3028/Spanish.zip

The link seems broken, and I think that's the same site that I visited
before where I could not download from.

Do you have it?  If so, do you mind emailing it to me?

Thanks in advance

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 22:25:36 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: Bruce_Martin@MANULIFE.COM
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Wed, 10 Nov 1999 17:45:11 -0500 Bruce Martin
<Bruce_Martin@MANULIFE.COM> writes:
>
> For that matter, even old MS-Works 2.0 shows bold, underline,  italic,
> strikethrough, superscript and subscript in Graphic mode. I don't  know
if Works
> 2.0 is Y2K compliant, though.
>
> Does anybody know where I can get a copy of Works 3.0 or whatever  the
last DOS
> version was?

Do you by any chance have the installation disks for version 2.0?

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 20:04:20 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Daniel Hertrich wrote:
>
> Hi Stefan,
>
> > What are ferrite beads? Does anybody now the german word for it?
> > Should I solder them just on top of the input contacts of the
> > photo diode?
>
> Ferrite = Ferrit. (klar)
> bead    = Tropfen, Perle, im Plural auch Kranz
>
> Das sind die Dinger, wie sie auch z.B. am seriellen Kabel vom HP
> connectivity kit dran sind, die schwarzen, meist zylinderfvrmigen mit
> Isolationsmaterial umh|llten Gebilde.
>
> Sie unterdr|cken Stvrsignale.
>
> Oops, sorry, I'll continue in English - this mail will go to the list!
>
> HP connectivity cable:
>
> HP plug-----Ferrite bead----------------------------PC plug

Nope.  I'm thinking of VERY small ones, on the photodiode's leads, if
possible.  I'll look soon (Didn't get out today, as I was afraid would
happen.  Did get my first HP200LX to upgrade to 4 more Mb, at least
<G>)  Hmmm, bet my father can loan me a T6 bit...

> You mustn't _solder_ it onto the contacts, just lay it around them or
> maybe fix it with glue.

Unsolder, fit the beads, re-solder.  They make some really small ferrite
beads.  If it'll do the job, I can buy a "scad" for people, and mail
them to those willing/able to do this change (Thaddeus, Times2Tech, and
I could also do this for whatever's reasonable for anyone else.)  I can
get beads as small as 1/8" x 1/8" for the LED's.  And probably smaller
ones.

> But I don't know how this should prevent our signals received from the
> cell phone, since they aren't received by the photo diode but by the
> receiver circuit _behind_ the diode.

... and by the leads of the photodiode, as well - they act like
antennas.  The ferrite bead would solve THAT.  Not the PC board traces
picking up signals though - I'll look at 'em.

> GTX
> daniel

  Mark

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 22:42:41 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: 1.2 Gb Type II PC Card
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Wed, 10 Nov 1999 09:34:46 -0000 "Brown, William"
<wdlb5359@GLAXOWELLCOME.CO.UK> writes:
> <<<
>
> From:   Christopher Allen SMTP:callen@efn.org
> Sent:   Wednesday, November 10, 1999 1:54 AM
> To:     wear-hard@haven.org
> Subject:        Sandisk's 1.2 gig type II PC cards
>
> (From the upping-the-ante-dept.)
>
> This is kind of interesting. Sandisk has just announced it will be
> shipping its 1.2 gig flash memory type II PC cards this month:
> http://www.sandisk.com/pr/991101_256megabit.htm

Might this signify lower prices for a 440 meg card?  Just wondering.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 20:05:54 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Stefan Peichl wrote:
>
> Dr. Werner Furlan wrote:
>
> > Did you identify the lead, through which the HF came into the receiver
> > circuit?
>
> No, I'm not sure if it comes through the leads. Unsoldering the
> receiving photo diode didn't change anything. So I guess it's
> not the leads?

I'm curious about something;  What happens when you connect across the
photodiode's pads with a 10 or 100 ohm resistor - does this noise
interrupt problem go completely away?  Or does it keep happening?  (This
sort of simulates having the IR LED pointed straight at the sun, should
"drown" the amplifier & stop the noise, unless some other part of the
machine's also contributing to the problem by being an antenna?)  Just
removing the diode is sort of like shoving the clutch in, when your
car's engine's throttle is stuck too high - it doesn't solve all the
problems, but at least you don't go sailing off the road (as your engine
explodes in flames <G>)  The resistor's the reverse, might solve the
problem <G>

The usual way to reduce noise's effects is to decrease the RF impedance
of those PC traces to ground, and increase the impedance through the
diode's leads & PC board pads to the amplifier, while keeping about the
same impedance at the photo diode terminals for 400 KHz type frequencies
(those at which the IR diodes transmit.)  "Low pass filtering" it's
called.

> > > Hence next test will use a capacitor. Any recommendations about
> > > the specification I should try to suppress 900Mhz and 1800Mhz?
> >
> > try 1nF to GND on each lead of the Diode or a C with 1nF across the two
> > leads of the RX-Diode.
>
> I tried 6 different capacitors:
>
> 1pF, 10pF, 100pF, 330pF, 1nF, 100nF
>
> I tried them across the leads and to the GND. The first 5 had
> no effect. But the 100nF really made it worse: The error rate
> almost doubled. It seems to have some effect, but in the wrong
> direction :-(

I'm wondering how 10nF would work, we suspect that 100nF (0.1uF for
those in the US) is too much, then.  <G>  So maybe 10 nF, or 1 nF?

> I also noticed, that touching any of the two capacitor's contacts
> with my hands increases the error rate dramatically! Why is that?

Your skin makes a NICE, huge cell phone antenna, making the problem far
worse - I'm pretty sure this tells us that our problem's the input
amplifier, right there, driven off the diode.

> Any other test ideas?

Try a 1nF or 10nF cap across the diode, with *short* leads, and maybe
then also try ferrite beads on the LED's leads.  Also that resistor
across the photodiode pads (or just short them, when fully lighted the
photodiode drops to about 0.7V voltage drop, so shouldn't hurt it.)

I need to take a 200LX apart, as the first unit I'll upgrade has
arrived, I can take it apart & start looking at the innards here.

> Stefan

  Mark

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 20:11:50 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: PCMCIA Card reader/writer
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Chris Lott wrote:
>
> > Can anyone recommend a good, inexpensive desktop PCMCIA card
> > reader/writer?
>
> I just posted a few days ago a unit I was satisfied with.  Costs
> $115.  It's by SCM Microsystems, and Envoy is the distributor.
> I am pleased with it's operation.  It is a front-loading drive,
> and holds two cards.  I think the top slot can hold Type III
> cards - I guess the bottom slot could too, if you don't have
> anything in the top slot.
>
> Check for them on the web.
>
> -Chris Lott

Sometimes can get the "SwapBox Classic"s for $45 or something locally,
Re-PC tends to have one or more for somewhere between $45 and $70 (I
have "enough" so quit memorizing their prices.)  I've used mine with a
Flash card in the lower slot & a HDD in the top, that's a NICE design,
you do need to make sure you plug the cables in right of course <G>
That machine's supported in most OS's, from Dos to Win3.x to Win9x to
Linux, which is good.  I can probably find 'em locally for people.

  Mark

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 20:15:42 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: Tr: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Conductive epoxy is pretty widely available, use that to a small copper
braid to ground on your machine and this is solved.  (Same thing as the
ground braid between a car engine and the chassis, basically.)

Grounding isn't always *necessary*, either, but it's a good idea - let's
hope the solution's easier though, than that.

  Mark

Pierre VIGNACQ wrote:
>
> ----- Message d'origine -----
> De : Pierre VIGNACQ <pierre.vignacq@turbomeca.fr>
> @ : <fjkaufman@worldnet.att.net>
> Envoyi : mardi 9 novembre 1999 16:28
> Objet : Re: We still need help
>
> | This is a pretty nice solution to keep plastic boxes in EM environment if
> it
> | can be decided at design step.
> | I don't know any reference of such a paint to obtain conductive film on
> | plastic.
> | Additionaly, if available, this would gives us pain to provide a low
> | impedance connection between this conductive surface (that you cannot
> solder
> | on) and the ground plane.
> | A very low impedance link between shielding and ground potential reference
> | is mandatory to provide a low impedance path to ground for the intercepted
> | perturbation. This path needs to be "easier" than the parasitic
> capacitance
> | between the shield and the circuit, that's why good soldering and large
> | straps are required.
> | That's why I wouldn't paint my LX...
> |
> | -----------------------------------------------------
> | Pierre VIGNACQ
> |
> | TURBOMECA - Service Electronique / Electronic Section
> | Email : Pierre.VIGNACQ@turbomeca.fr
> | Phone : +33 - 5 59 12 55 34
> | Fax :   +33 - 5 59 12 51 48
> | -----------------------------------------------------
> | ----- Message d'origine -----
> | De : <fjkaufman@worldnet.att.net>
> | @ : HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Pierre VIGNACQ
> | <pierre.vignacq@TURBOMECA.FR>
> | Envoyi : mardi 9 novembre 1999 16:07
> | Objet : Re: We still need help
> |
> |
> | | > Ferrite beads are pieces of ferrite of various shapes but having a
> hole
> | i
> | |
> | | > filtering means after having introduced a very well referenced
> | shielding,
> | | > providing somehow a global protection, and quantified its efficiency.
> | |
> | | Now that I think about it, my old Osborne was painted inside with some
> | | kind of "shielding" "paint."   Is there some form of liquid paint that
> | | could be use to coat the inside (outside but not pretty) of the hp to
> | | provide protection?
> | |
> |
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 21:08:11 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
In-Reply-To:  <19991111022632.JISY21742@worldnet.att.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 11 Nov 1999, F. Kaufman wrote:

> Yup, it uses the cga GRAPHIC "adapter" of the HP to display it.  I
> don't really use it but it can be done from within Word 5.0 (probably
> 5.5, too)  I usually work in the text mode if I use Word 5.0 on the
> palmtop.

When I thought about this, I realized that they used Word 5.0 all the time
where I used to work, and it did show the characters on the screen.  Of
course they used VGA monitors, but even so, the 200LX can handle it too.
<g>

> I do still predominantly use Word 5.0 for Dos on all of my desktops
> for most of my job writing (with occasional bouts of TSE/qedit) - I
> let my secretary worry about making it Winword when she imports it!
> (G)

Isn't Word 5.0 the one with the Y2K problem, where if you open any files
dated after 12/31/99 it has a fit?  Better upgrade to 5.5 at least...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 21:14:06 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Fluff: Re: 1.2 Gb Type II PC Card
In-Reply-To:  <HPLX-L%99111022373663@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 10 Nov 1999, Al Kind wrote:

> My "48MB" SanDisk CF reads 47941632 bytes (by CHKDSK) My "32MB" TDK CF
> reads 3216588 bytes ? Is 1MB 1,024,000 bytes or 1,048,576 bytes? (if I
> could only remember back to my 1st Comp Sci course nn years ago ;-)

Most drive manufacturers (and flash memory manufacturers as well,
probably) say that 1MB is 1,000,000 bytes, thus allowing themselves to
advertise things like "40MB hard drive!" while getting away with fewer
actual bytes.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 23:37:04 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: Fluff: Re: 1.2 Gb Type II PC Card
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Wed, 10 Nov 1999 23:30:37 -0500 (EST)

OK, for marketing purposes, 1 "megabyte" is a million bytes
(1,000,000), but in actuality, is 1MB 1,000 kB (1,024,000) or 220
bytes (1,048,576)?

...AJKind

43m30s ....>> in the future <<....
On Thu, 11 Nov 1999, David Sargeant wrote:


> Most drive manufacturers (and flash memory manufacturers as well,
> probably) say that 1MB is 1,000,000 bytes, thus allowing themselves to
> advertise things like "40MB hard drive!" while getting away with fewer
> actual bytes.

*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 21:49:24 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Fluff: Re: 1.2 Gb Type II PC Card
In-Reply-To:  <HPLX-L%99111023370522@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 10 Nov 1999, Al Kind wrote:

> OK, for marketing purposes, 1 "megabyte" is a million bytes
> (1,000,000), but in actuality, is 1MB 1,000 kB (1,024,000) or 220
> bytes (1,048,576)?

It's 1,024K, or 1,048,576 bytes.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 00:09:37 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: FS: acCIS v4.0
Comments: To: John J Vanderstel <j_vanderstel@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

John,

> Thanks so much for the info on acCIS v4.0.  Where might I find it?

Browse to www.rundel-d.com

> Also, why steer clear of CIS 2000?  How is it different than other
> options?

AOL style Compuserve introduced after the merger with AOL.

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 10 Nov 1999 23:09:43 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

While this little WYSISOWYG (What-You-See-Is-Sort-of-What-You-Get) feature
has a certain level of niftiness, needless to say, it is not much more than
that since you cannot use the LX's zoom feature with it enabled. Besides,
you can configure WordPerfect to use colors suitable to the LCD screen.

Word's a good app, but the superior print preview function of WP5.x (plus
the fact that you can't have endnotes in Word 5.5) makes me give it the nod
for my heavy-duty word processing.

Also, is it just me or has anyone else had some problems with Buddy's
SmartCaps feature in Word 5.5? On my single-speed units, the capitalized
characters do not display until I type in the next one.  I haven't had this
problem w/WP 5 or in any other DOS apps either.

__ms__

*  A few years ago, I remember using WP on a monochrome screen that had all
that underline stuff. I know that you can enable WP on an EGA or higher
screen to display _one_ font in the WYSISOWYG style but I distinctly
remember WYSISOWYG on a monochrome. Can anyone else recall ever having seen
this or am I just deluded?

>> How does it manner to show bold and italic and strikethrough?  Does it
use
>> graphics mode or something?  WP51 uses text mode and represents these
>> modes (italic, etc.) as colors, which don't show up well on the palmtop
>> screen.  Print Preview shows you what it looks like, though.


>Yup, it uses the cga GRAPHIC "adapter" of the HP to display it.  I don't
>really use it but it can be done from within Word 5.0 (probably 5.5,
>too)  I usually work in the text mode if I use Word 5.0 on the palmtop.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 13:27:36 -0500
Reply-To:     Nicholas Chan <ncknight@pacific.net.sg>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nicholas Chan <ncknight@PACIFIC.NET.SG>
Subject:      200LX 1Meg units
In-Reply-To:  <199911070403.MAA16593@spade.pacific.net.sg>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Used, but in very good condition, 4 units asking $225 each without shipping. Please
mail off list if interested.

HP 660LX 32Meg unit, 1 unit asking $550 without shipping. Please mail off list if
interested.

If anyone needs a Psion s5, please also mail off list. Thanks.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 14:59:30 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              SUDA Takahisa <mimmkyi@GENESIS.NE.JP>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         SUDA Takahisa <mimmkyi@GENESIS.NE.JP>
Subject:      Re: Morphy one
In-Reply-To:  <19991111022655.JJAE21742@worldnet.att.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

> > Ken - I have followed what you guys in Japan have done with the
> HP200LX for a number of years, and I've been amazed. One question I have
> about "Morphy one" is what built in software is planed for it?
>
> Excellent question.  I, personally, would be lost without the built-in
> PIM stuff, particularly the appt application.

Little has been discussed about software yet. Basically, Morphy One
will be just a tiny vanilla PC, without any software built in.
Hopefully, the team is planning to start various software services,
and I hope many apps that support CGA/486 should work as well.

Anyway, they hear all of our roaring and it's killing the leaders :)
Just let them go for a while, because more info will come very soon.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 06:08:56 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: We still need help
Comments: To: S_Carder@COMPUSERVE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

> > My question; what software did you run on the 95LX in order to use it
> as a
> > universal remote?
>
> I used a shareware program called Remcom (for Remote Commander).  I
> believe I
> downloaded it from Compuserve years ago.  I will try to locate a copy,

RemCom is also available on SUPER!
http://www.palmtop.net/super.html

GtX
daniel
--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 07:09:34 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>*  A few years ago, I remember using WP on a monochrome screen that had all
>that underline stuff. I know that you can enable WP on an EGA or higher
>screen to display _one_ font in the WYSISOWYG style but I distinctly
>remember WYSISOWYG on a monochrome. Can anyone else recall ever having seen
>this or am I just deluded?


I think on Hercules adapters you have this function. I never saw it for CGA.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 01:18:46 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, GJColeman@CSI.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         George Coleman <GJColeman@CSI.COM>
Subject:      Elvis on the LX with WINSI.SYS
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Here's a tip that I've never seen mentioned here, so I thought
I'd pass it on.  If you're not interested in Elvis (vi), please
forgive the noise.

Using Winsi.sys, yet-another Ansi.sys replacement, you can run
Elvis in 18-line, 64-column mode (or any other LX screen mode,
AFAIK).  Winsi.sys let's you define a window for DOS programs
that use line-mode output.  Lines will wrap on the columns you
define for the window, and output won't go beyond the lines
you define.  Winsi.sys was written by David Goodman in 1992
for the 95LX, and it works fine on my DS 200 and my pentium
desktop.  If it's not on SUPER, I can send a copy to anyone
interested.

Once Winsi.sys is installed (you can use the SC "device"
command to install it in just one sesion), you can set up the
Elvis environmentals.  Set TERM=3Dansi (or nansi, doesn't seem
to make any difference), set LINES=3D18 and set COLUMNS=3D64.
Then do: echo 1;1;64;18W and Winsi will set the window size.
( is Escape - from the command line you can enter this as
Control-V Escape.)

Zoom the display to 64x18. Then launch Elvis. The command line
will be at the bottom of the screen, and the entire display
will be contained within the window.  If it looks funny, do :q
and clear the screen and try it again--you might have missed
a step.  One you're comfortablle with it, you can write a .bat
file to do all this and then set the window back to 80x25 if
you want.

-George

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 01:48:25 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, GJColeman@CSI.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         George Coleman <GJColeman@CSI.COM>
Subject:      Re: Elvis on the LX with WINSI.SYS
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Forgot to mention that this also works with Thompson Toolkit's
vi, which is based on Elvis.

Also, when you set TERM=3Dansi, "ansi" has to be lower case.

-George

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 18:15:10 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paul Johnson <paulj@SILCHIP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paul Johnson <paulj@SILCHIP.COM.AU>
Subject:      Re: Secure Device software / unfragmenting a drive
Comments: To: Robert Hocking <hocking@FLASH.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> > I used some defragger (not norton or software carousel's) a number of
> > years ago and it fully corrupted my a: drive.  I don't recall which one
> > it was but what it did was conveniently shorten all of my files to about
> > 8k inclding data and executables.  It really did give me a lot more room
> > (sigh) until I spent a few hours to restore it all!  I had used it for
> > years on the 486 dos desktop with great results.
>
> I downloaded DOG a while back and it ran great on my "C" drive,
> but when I used it on my SimpleTech 40 meg flash card on my "A"
> drive, the data on the card was corrupted.  I tried it on my
> other SimpleTech 40 meg flash card, and the same thing happened.
> I gave up on trying to defrag the cards, and now if I feel they
> need defragging, I copy all the data off them, and then back to
> them, which does the same thing, from what I understand, and is
> much quicker.
>
> Best Regards, Robert Hocking
> In Sterling Heights, Michigan
> Email Address: hocking@flash.net
>

I tried it on a 100LX ages ago, it went ok with the C drive but messed
up the flash card when used on it.  It has always worked well on my
desktop computer. I emailed the author (from memory I think he didn't
want payment but just wanted to hear if it worked ok) but never got a
reply.

I'm not sure if there is much point defragging the drives on an LX,
maybe someone more knowledgable has a clue.

Paul Johnson.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 08:51:21 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Andreas Garzotto <garzNOSPAM@IPROLINK.CH>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Andreas Garzotto <garzNOSPAM@IPROLINK.CH>
Subject:      Re: PE/PIM possible new features
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Stephan Goeldi wrote:
> >I see that Andreas answered to you on this. AFAIK he does not
> >post here publicly, nor reads the list anymore. BTW, I use
> >that format.
>
> <hysterical panic>
>
> WHY!!!

I still read this list, but not regularly. And I usually reply
privately if I reply. Posting here on the list most often just triggers
some kind of hostility. At least I perceive it so. Since I don't post
here anymore, there is much less anger I have to swallow. After all, I
am visiting here to get ideas and to help if I can, not to "chat" nor
fight some strange wars.

Andreas

The above is my private and personal opinion and not in any way related
to D&A Software Inc. Please email support@dasoft.com for official
support and check out the FAQs at http://www.dasoft.com.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 08:34:54 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              ITSUMI ken-ichi <amt@ITSUMI.KEN.ORG>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         ITSUMI ken-ichi <amt@ITSUMI.KEN.ORG>
Subject:      Kanji suport on PE(Was PE/PIM wish list)
Comments: To: sponsor@FTEL.NET
In-Reply-To:  A Meshar's message of "Tue, 9 Nov 1999 22:52:18 -0800"
              <199911100652.WAA31727@ftel.net>
MIME-Version: 1.0 (generated by SEMI 1.10.1 - "Morimoto")
Content-Type: text/plain; charset=US-ASCII

In message "Re: PE/PIM wish list (Was  PE/PIM possible new features)"
    on 99/11/09, A Meshar <sponsor@FTEL.NET> writes:
>ken> 1. I would like to display kanji (and edit kanji)
>
>Hmmm... Doesn't PE support kanji already?

I have'nt try to apply dsp14 like posx/lx and www/lx japanization.

And among japanese lxer it is a contlete brief that pe is great
but can't use in japanese.

So I promise to try to see pe japanization and report the result here.

As I post recently ,new 486 base post lx machine come soon, And I want
to use pim/LX on that.

ken

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 11:15:49 +0100
Reply-To:     furlan@gmx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Dr. Werner Furlan" <furlan@GMX.NET>
Organization: OE9FWV
Subject:      Re: We still need help
Comments: To: Stefan.Peichl@t-online.de
In-Reply-To:  <m11liVq-0003COC@fwd02.btx.dtag.de>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

-----BEGIN PGP SIGNED MESSAGE-----


On 11 Nov 99, at 2:55, Stefan Peichl wrote:

> No, I'm not sure if it comes through the leads. Unsoldering the
> receiving photo diode didn't change anything. So I guess it's
> not the leads?

it could be the wires on the circuit board going to the receiver IC.

> I tried 6 different capacitors:
>
> 1pF, 10pF, 100pF, 330pF, 1nF, 100nF
>
for frequencies about 1 GHz 100 pF should work as Low pass filter.

> I tried them across the leads and to the GND. The first 5 had
> no effect. But the 100nF really made it worse: The error rate
> almost doubled. It seems to have some effect, but in the wrong
> direction :-(

how long where the wires of your test - C's? Or did you use SMD
capacitors? You have to use ceramic capacitors. They should be as close
as possible to the receiver IC and have no wires, which could act as
additional antennas.
>
> I also noticed, that touching any of the two capacitor's contacts
> with my hands increases the error rate dramatically! Why is that?
your body acts as antenna.

It is usually very difficult to improve a unit when the HF shielding
was forgotten in the layout...

Werner


-----BEGIN PGP SIGNATURE-----
Version: PGP 6.0.2 -- QDPGP 2.60
Comment: http://community.wow.net/grt/qdpgp.html

iQEVAwUBOCqJRCMwfGDxkN9XAQFaZgf9GvcRVb15OWN9s46T+t7JUlSgBSkTkEgB
clh/ZR2R9bBauYmLfgfLFabnxr1a0o2jp+kWqADTmn8soUke8nlGHi5iZ6A+07MS
bup7C7f2wxmdxzcZGfd26yiQk6ZF3FhlcOZmxRIgA2J0G0JImkNZ+r92Tsu6A8ve
Q5RmFdq++2dbvfPPIKLIqGxaJ7eikDEN9+wARfkmyKxGGmh9QGVg4zczBcZVgMMc
si+Vu3hy0DtXN74R37r2nY49f5NhdFYylbQ/PmlmUPO2ARzPEtv9rfF5LkOLesmQ
BQEKW43k86dZjIyRA6HcxvLXPFHT6ongdWP9GvNt2peSeBldg31W8Q==
=ov2o
-----END PGP SIGNATURE-----

Thought for the day:
    Advertising (n): the science of arresting the human
    intelligence for long enough to get money from it.
           -- Stephen Leacock.

--
Dr. Werner Furlan
mailto:oe9fwv@vlbg.at (Dr. Werner Furlan)
Visit our Amateur Radio Homepage: http://www.oe9.at/oe9xrk/
Powered by Pegasus Mail: get it FREE at:
http://www.pegasus.usa.com or  http://www.let.rug.nl/pegasus/

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 11:37:28 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: Morphy one
In-Reply-To:  <199911111459.DGG79311.JNLZNJN@genesis.ne.jp>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 11 Nov 1999, SUDA Takahisa wrote:

> Little has been discussed about software yet. Basically, Morphy One
> will be just a tiny vanilla PC, without any software built in.
> Hopefully, the team is planning to start various software services,
> and I hope many apps that support CGA/486 should work as well.

What about Zoom modes (with the smaller screeen, this becomes all the more
essential)? I'd hate to see some cheesy TSR solution, which is bound to be
worse than the hardware zoom built-into the LX. Does the ELAN chip have
support for this?

What about graphics modes? will it have dithered and colour modes (and
inverse) like the LX or what?

Int 5F support?


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 07:55:26 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              johncarlo@MINDSPRING.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John Carlo <johncarlo@MINDSPRING.COM>
Subject:      unsubscribe
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----=_NextPart_000_00F2_01BF2C1A.1D4E3620"

This is a multi-part message in MIME format.

------=_NextPart_000_00F2_01BF2C1A.1D4E3620
Content-Type: text/plain;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable



------=_NextPart_000_00F2_01BF2C1A.1D4E3620
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2014.210" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>&nbsp;</DIV></BODY></HTML>

------=_NextPart_000_00F2_01BF2C1A.1D4E3620--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 22:01:42 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              SUDA Takahisa <mimmkyi@GENESIS.NE.JP>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         SUDA Takahisa <mimmkyi@GENESIS.NE.JP>
Subject:      Re: Morphy one
In-Reply-To:  <Pine.HPX.4.20.9911111126020.26652-100000@embla.diku.dk>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

"Laust Brock-Nannestad <laustbn@DIKU.DK>" wrote:
> What about Zoom modes (with the smaller screeen, this becomes all the more

> What about graphics modes? will it have dithered and colour modes (and
> inverse) like the LX or what?

http://www.amd.com/products/lpd/techdocs/techdocs.html
http://www.amd.com/products/lpd/techdocs/e86/21030.pdf
You can check this :) , but anyway...

I see the manual says Elan "Supports horizontal dot doubling and
vertical line doubling" plus color modes.

> Int 5F support?

I don't think Elan has it.

I'm not sure if the team have these nice features in the plan...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 07:34:39 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Nickum, Roy H." <NickumRH@BV.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Nickum, Roy H." <NickumRH@BV.COM>
Subject:      MS-Works
MIME-Version: 1.0
Content-Type: text/plain

Domingo & Bruce, I have installation disks for both versions 2 & 3. Let me
know off the list what you need (copies each disk as separate e-mail
attachments or a copy of an installed set or ?) and I will dig them out and
try to help you.
_________

Domingo <ddvteach@JUNO.COM> wrote:

<Bruce_Martin@MANULIFE.COM> writes:
>
> Does anybody know where I can get a copy of Works 3.0 or whatever  the
last DOS
> version was?

Do you by any chance have the installation disks for version 2.0?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 08:46:47 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Wittkamper, John" <jwittkamper@V-ONE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Wittkamper, John" <jwittkamper@V-ONE.COM>
Subject:      Re: Elvis on the LX with WINSI.SYS
Comments: To: "GJColeman@CSI.COM" <GJColeman@CSI.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

What is "Thompson Toolkit"?

                John :-)

-----Original Message-----
From: George Coleman mailto:GJColeman@CSI.COM
Sent: Thursday, November 11, 1999 1:48 AM
To: HPLX-L@UCONNVM.UConn.Edu
Subject: Re: Elvis on the LX with WINSI.SYS


Forgot to mention that this also works with Thompson Toolkit's
vi, which is based on Elvis.

Also, when you set TERM=ansi, "ansi" has to be lower case.

-George

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 08:08:40 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Flash Cards and Win98
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Do any of you Win98 experts know about the error message that I get
whenever I install my palmtop flash disk on the desktop?  It reports
that the disk is low on space, and wants to clean it up.  I always
say no, but it is annoying to have this prompt all the time.  Anyway
to disable it for a particular drive?

-Chris

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 15:08:32 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Isn't Word 5.0 the one with the Y2K problem, where if you open any files
> dated after 12/31/99 it has a fit?  Better upgrade to 5.5 at least...

Yes, it does have that problem.  And supposedly, it not only chokes on
the file but brings down the computer.  I have 5.5 but I'm not ready to
move just yet.  While the 5.0 interface is odd, it is an odd I've grown
use to.  5.5 is more like, was it quickbasic or their editor, and I'm
not use to it.  Also a number of my "macros" did not convert.

I did purchase 5.5 along with real disks and manuals from someone who
posted here.  I've run it but will move at the last friggin' second!!!
(g)

More, what I don't want to give up on the desktops (both win95) and the
HP is my use of Smartkey - nothing in macro utilities comes close in
Win95.  It has a "lead in key" which means you can assign the normal
key, the shift, alt and ctrl versions and not interfere with those
versions in applications.  First you press the lead key alone and then
the assigned key.  So I press "lead and a" and it types "approximately."
I type "lead and c" and it types "comprehensive plan" while if I type
"lead Shift c" it types a who paragraph regarding the "comp plan."
Similarly, "lead alt c" types yet another phrase.  Not interfering with
the regular function of alt-c.

Hard to give up old tools!  (G)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 16:39:34 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mark Willis wrote:

> I need to take a 200LX apart, as the first unit I'll upgrade has
> arrived, I can take it apart & start looking at the innards here.

I'd be more than happy if someone with more electronic
background could jump into it!

I will surly provide you with any needed test software.

I already added a debug mode to the RING program. It does now
quantify the error, because, as we know, WWW can recover from a
certain amount of errors (like the number of errors, the Nokia
8810 produces), but we don't know yet, where this limit is.

But it means to be sufficient to reduce the errors, and not to
eliminate them at all, which would be indeed desirable.

I tested the new RING.COM with single and double speed
palmtops. The results were identical, hence the error mean
value, as reported from RING, should be comparable for all
palmtop-mobile experiments. I used the real time clock for
measuring, no program loops.

Download the newest version of RING.COM from

http://peichl.hplx.net/ring.zip

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 16:48:10 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Bruce,

> >> Word on the palmtop shows character styles (bold, underline, italic, =
strike
> >> through, small caps, double underline, superscript and subscript) =
represented
> >> graphically on the editing screen. It does not show different fonts =
(i.e.
> Times,
> >> Courier etc.) and it does not show different point sizes. The Print =
Preview

How do you get into graphics mode with Word 5.5?

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 10:49:38 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: Time Tracking...
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

> I was looking at a time tracking program that I got from SUPER called
> TimeStax. Nice little program, and it seems to do all the stuff I need.
> It even has a nifty 'timer' function that lets me start and stop timers
> on the various projects I work on through out the day. Does reports
> pretty nicely too.
>
> However, I decided to Y2K test it. I tried keying in a date of  01/01/00
> and it wouldn't take it. Bummer.
>
Does TimeStax allow you to key in a 4-digit year? If so, how about keying in
01/01/2000 and seeing what happens?

Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 17:15:59 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mark Willis wrote:

> I'm curious about something;  What happens when you connect across the
> photodiode's pads with a 10 or 100 ohm resistor - does this noise
> interrupt problem go completely away?  Or does it keep happening?

I used 100 ohm and the noise went away completely.
Not one single error! Is this good or bad news?
Indeed this resistor also disables receiving data through
the IR port.

This kind of test I can do easily, because I soldered 3 wires
(to both photo diode legs and GND) and led them out through the
(empty) backup battery case. I soldered a plug at the open
ends and can now easily just plug in capacitors or resistors or ...

No more soldering and opening/closing the palmtop case needed.
(Believe me, I'm good at that already ;-)

So what next?

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 10:29:54 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: Time Tracking...
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----_=_NextPart_001_01BF2C61.FC25A0BC"

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01BF2C61.FC25A0BC
Content-Type: text/plain;
        charset="iso-8859-1"

Nope. Won't take a 4-digit year. Date format has to be MM/DD/YY.
It has a feature where you key in a "t" in the date field, and it will
populate with the current date. I wonder what will happen if I key a "t"
into it on New Years Day?  <g>

I searched around on the net last night for quite a while looking for
free/cheap time tracking programs. I tried out about 8 of them. But none
of them seemed to work as smoothly (for me at least) as TimeStax.

I also tried out the Timetracker/LX demo. The thing I didn't like about
it was that if you stopped one task to work on an other, and then came
back to the first, you have to re-enter another line for the first task
again. Yuck. (Unless I'm misunderstanding it...certainly a possibility).
With TimeStax you can simply hit a key to stop the timer on the first
task, and start it on the second. Then stop it on the second task and go
back and continue timing on the first again. Smooth. No extra entries.
I think I understand why TT/LX does this. Some people want to know what
time they started on each task. For me that's not important. I just need
to accumulate a daily total for each task.

At this point I'm thinking I'll probably stick with TimeStax into 2000,
and just use year 1980 for my entries (assuming the program will even
_run_ come 2000! <g>).

Steve

        > However, I decided to Y2K test it. I tried keying in a date of
01/01/00
        > and it wouldn't take it. Bummer.
        >
        Does TimeStax allow you to key in a 4-digit year? If so, how
about keying in
        01/01/2000 and seeing what happens?

        Bruce in Toronto

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

------_=_NextPart_001_01BF2C61.FC25A0BC
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12">
<TITLE>RE: Time Tracking...</TITLE>
</HEAD>
<BODY>

<P><FONT FACE=3D"Arial">Nope. Won't take a 4-digit year. Date format =
has to be MM/DD/YY.</FONT>
<BR><FONT FACE=3D"Arial">It has a feature where you key in a "t" in the =
date field, and it will populate with the current date. I wonder what =
will happen if I key a "t" into it on New Years Day?&nbsp; =
&lt;g&gt;</FONT></P>

<P><FONT FACE=3D"Arial">I searched around on the net last night for =
quite a while looking for free/cheap time tracking programs. I tried =
out about 8 of them. But none of them seemed to work as smoothly (for =
me at least) as TimeStax. </FONT></P>

<P><FONT FACE=3D"Arial">I also tried out the Timetracker/LX demo. The =
thing I didn't like about it was that if you stopped one task to work =
on an other, and then came back to the first, you have to re-enter =
another line for the first task again. Yuck. (Unless I'm =
misunderstanding it...certainly a possibility). With TimeStax you can =
simply hit a key to stop the timer on the first task, and start it on =
the second. Then stop it on the second task and go back and continue =
timing on the first again. Smooth. No extra entries.&nbsp; </FONT></P>

<P><FONT FACE=3D"Arial">I think I understand why TT/LX does this. Some =
people want to know what time they started on each task. For me that's =
not important. I just need to accumulate a daily total for each =
task.</FONT></P>

<P><FONT FACE=3D"Arial">At this point I'm thinking I'll probably stick =
with TimeStax into 2000, and just use year 1980 for my entries =
(assuming the program will even _<I>run</I>_ come 2000! =
&lt;g&gt;).</FONT></P>

<P><FONT FACE=3D"Arial">Steve</FONT>
</P>
<UL>
<P><A NAME=3D"_MailData"><FONT SIZE=3D2>&gt; However, I decided to Y2K =
test it. I tried keying in a date of&nbsp; 01/01/00</FONT></A>
<BR><FONT SIZE=3D2>&gt; and it wouldn't take it. Bummer.</FONT>
<BR><FONT SIZE=3D2>&gt;</FONT>
<BR><FONT SIZE=3D2>Does TimeStax allow you to key in a 4-digit year? If =
so, how about keying in</FONT>
<BR><FONT SIZE=3D2>01/01/2000 and seeing what happens?</FONT>
</P>

<P><FONT SIZE=3D2>Bruce in Toronto</FONT>
</P>

<P><FONT SIZE=3D2>** HPLX-L LIST Info at <A =
HREF=3D"http://www.sp.uconn.edu/~mchem1/HPLX.shtml" =
TARGET=3D"_blank">http://www.sp.uconn.edu/~mchem1/HPLX.shtml</A></FONT>
</P>
</UL>
</BODY>
</HTML>
------_=_NextPart_001_01BF2C61.FC25A0BC--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 08:59:14 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@YAHOO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@YAHOO.COM>
Subject:      Morphy one SW
Comments: To: SUDA Takahisa <mimmkyi@GENESIS.NE.JP>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Actually plane vanilla is OK, so long as it runs
the conectivity pack as does the PC110.
Anyone ever do this on the Libretto?

Course the CPack can be improved up on :).

Semper mobilius,
yor pal al..................

> > > Ken - I have followed what you guys in Japan have done
> with the
> > HP200LX for a number of years, and I've been amazed. One
> question I have
> > about "Morphy one" is what built in software is planed for
> it?
> >
> > Excellent question.  I, personally, would be lost without
> the built-in
> > PIM stuff, particularly the appt application.
>
> Little has been discussed about software yet. Basically,
> Morphy One
> will be just a tiny vanilla PC, without any software built in.
> Hopefully, the team is planning to start various software
> services,
> and I hope many apps that support CGA/486 should work as well.
>
> Anyway, they hear all of our roaring and it's killing the
> leaders :)
> Just let them go for a while, because more info will come very
> soon.
>

__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 18:59:07 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              schittke@RZ.FH-AUGSBURG.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Prof. Dr. H.J. Schittke" <schittke@RZ.FH-AUGSBURG.DE>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
In-Reply-To:  <HPLX-L%99111110480715@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> How do you get into graphics mode with Word 5.5?
>
Easy:
You open View, then Preferences and down in Display mode chose
Graphics. From then you are in graphics mode

Good luck    - hjs

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com>

iQA/AwUBOCr11M/lHvGeiCpfEQIyLQCg+u8PcjqfpRXV2O9c+7DtcyuxV4MAn3YZ
2kKXMAHog3sMtoNvmwsouOIb
=2GjU
-----END PGP SIGNATURE-----

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 19:22:35 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> > How do you get into graphics mode with Word 5.5?
> >
> Easy:
> You open View, then Preferences and down in Display mode chose
> Graphics. From then you are in graphics mode

Not here, it says cannot change view mode.

Any further idea?

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 10:23:47 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Donald Collins <dcollins@MCSWEB1.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Donald Collins <dcollins@MCSWEB1.COM>
Subject:      Re: ccLXPOP - soliciting ideas for improvement
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I concur with Rod's sugestion.

Also, it would be great to be able to redirect msgs to folders
depending upon who it is FROM: or the SUBJECT:

A msg log would be nice also.  Especialy if it contained the
file name & attachment names.  So a script could open the log
and perform automation tasks to the msgs/attachments.
(ie get stock or currency info w/o opening ccMail)


Don.



>From:         Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
>Subject:      ccLXPOP - soliciting ideas for improvement
>
>If anyone has ideas on what improvements could be made to ccMail, I am
>interested in hearing them! Thanks
>
>Brian

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 19:26:38 +0100
Reply-To:     furlan@gmx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Dr. Werner Furlan" <furlan@GMX.NET>
Organization: OE9FWV
Subject:      Re: we still need help
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

hello Stefan and company,

Am 11 Nov 99, um  17:15, schrieb Stefan Peichl ueber
"Re: We still need help":

> I used 100 ohm and the noise went away completely.
> Not one single error! Is this good or bad news?
> Indeed this resistor also disables receiving data through
> the IR port.

you make a short circuit with this resistor. It shows that the input
of the noise is through the IR-line.

>
> This kind of test I can do easily, because I soldered 3 wires
> (to both photo diode legs and GND) and led them out through the
> (empty) backup battery case. I soldered a plug at the open ends and
> can now easily just plug in capacitors or resistors or ...
>
thats the problem I mentioned before... you MUST NOT have long
wires if you want to block HF from your receiver circuit. Your
capacitors will not work with long legs...

best regards,

Werner

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 12:34:34 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "James P. Grenert" <grenert.james@MAYO.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "James P. Grenert" <grenert.james@MAYO.EDU>
Organization: Mayo Medical School
Subject:      Re: ccLXPOP - soliciting ideas for improvement
Comments: To: Leon Phillips <leon.phillips@netspeed.com.au>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 9 Nov 1999, Leon Phillips wrote:
> 2.      An ability to populate the ccMail address book with phone book email
> entries, possibly a CSV import function.
>
There is (I think) a good solution to this.  I use a macro which takes the
email address from a phone book entry, opens up cc:Mail, and starts a new
message to the person.  Here is how my macro looks:
{Enter}{Enter}{Alt+E}{Copy}{F9}n{cc:Mail}{F4}{Paste}

Here's how it works:
First you go to the desired item in the Phone book.  {Enter}{Enter} opens
up the selected record (it will work if the record is already open or if
you are still on the Datacard/lookup screen).  {Alt+E} goes to the email
address field of the record.  I use a customized phone book and Alt+E
jumps to the email field.  It would need to be changed to wherever email
addresses are kept in your own phonebook.  For example, if you kept email
addresses in the "Company" field, you would use {Alt+P}.  One caveat is
that there cannot be anything else in the field containing the email
address.  {Copy} copies the address to the clipboard.  {F9} exits the
record and n answers no to the "Save Changes?" box.  {cc:Mail} starts up
cc:Mail or switches to it if already open.  {F4} creates a new message.
{Paste} pastes the address in the "To" field.  Voila!

Hope this is useful.
J. P. Grenert
grenert@mayo.edu

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 19:54:22 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Also, is it just me or has anyone else had some problems with Buddy's
> SmartCaps feature in Word 5.5? On my single-speed units, the capitalized
> characters do not display until I type in the next one.  I haven't had this
> problem w/WP 5 or in any other DOS apps either.

Same in Word 5.0, just for your info.  You get use to it but it is
disconcerting at first.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 12:05:15 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Pocket references (esp quotations)
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

I've asked this before I'm sure, but can't seem to find it in the archive
search.

Is there a good quotation reference for the LX, comparable to an updated (not
the 1901 version) of Bartlett's?

I know Collins is a good dictionary, and serves at least one member as a
mini-encyclopedia (still looking to get that one), but I always find myself
searching for a memorable quote, and reaching for my Bartlett's.  It's not all
that big really (as books go), so I figure a digital version must be feasible.

Anyone have/use one or know of one to recommend for the LX?

Obviously, CD-based multi-media bloatware versions need not apply.

I'm not sure what others keep on hand for references, but a Bartlett's,
dictionary and thesaurus would make me a very happy person (I know that
reference junkie David would like the world atlas at his fingertips <g> )

Thanks.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 13:19:57 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Pocket references (esp quotations)
In-Reply-To:  <88256826.006EA380.00@n-smtpmta.candle.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 11 Nov 1999, Longden Loo wrote:

> Is there a good quotation reference for the LX, comparable to an
> updated (not the 1901 version) of Bartlett's?

Somewhere around here, I have a version of CorrectQuotes for DOS that runs
just wonderfully on the 200LX.  It fits on one floppy disk, too.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 15:27:08 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              PETER SWINBANK <PETERSWINBANK@COMPUSERVE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         PETER SWINBANK <PETERSWINBANK@COMPUSERVE.COM>
Subject:      200LX 4Mb : SCREEN DISPLAY GOING BAD?
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=ISO-8859-1

From:   PETER SWINBANK, =

To:     All, INTERNET:HPLX-L@UCONNVM.UCONN.EDU
                                  =

Date:   11/11/99 20:10 =


RE:     200LX 4Mb : SCREEN DISPLAY GOING BAD?

Help and advice needed please!  =

My 4Mb 200LX  is about  15 months old.  It is factory standard, no
double-speed or anything fancy like that.  I use it every day.  I've just=

noticed that I seem to have lost bottom part of the function key labels
that display at the bottom of the screen.  A very faint flickering line
seems to be overwriting the text - all along the very bottom (last line)
right across the full screen.
For example in the "More Applications" screen which shows Help, Add, Edit=

Delete ... etc. at the bottom, I've almost lost the bottom of the "p" sta=
lk
and "e" in "Help".
I know it is not right because I have a backup 2Mb 200LX about 4 years ol=
d
which displays these labels clearly. =

At present I can still easily recognise what the labels are.  But I'm qui=
te
worried about it.   Will it get worse? Does it just need a bit of clean -=

surely not after 15 months very careful use?   What could be causing it? =

Has anyone experienced this please?
I've tried  a reboot and hit the Alt key then ask it to boot from the D:
drive  - no change.
I've tried a cold reboot (i.e. answered "NO" when asked if I want to
intialise the C: drive) - no change.
Any comments, advice etc would be most welcome. =


Regards,  Peter Swinbank"

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 13:08:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Donald Collins <dcollins@MCSWEB1.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Donald Collins <dcollins@MCSWEB1.COM>
Subject:      Re: ccLXPOP - soliciting ideas for improvement
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Or, you could print a report to file for ccMade to use.

Here is the format...

Name: Mr. Soandso
Locn: A
Addr: hisemailaddress@isp.com
Cmts: not used

Name: Mrs. Soandso
Locn: A
Addr: heremailaddress@isp.com
Cmts: not used


ccMade will read the above format and update your address list.

Don.

>On Tue, 9 Nov 1999, Leon Phillips wrote:

>> 2.      An ability to populate the ccMail address book with phone book email
>> entries, possibly a CSV import function.
>>

>There is (I think) a good solution to this.  I use a macro which takes the
>email address from a phone book entry, opens up cc:Mail, and starts a new
>message to the person.  Here is how my macro looks:
>{Enter}{Enter}{Alt+E}{Copy}{F9}n{cc:Mail}{F4}{Paste}

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 12:38:22 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Pocket references (esp quotations)
Comments: To: David Sargeant <david@HPLX.NET>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

But how comprehensive can it be if it fits on just one disk?

Hopefully, mankind's had more meaningful things to say than that! <g>

- Longden





David Sargeant <david@HPLX.NET> on 11/11/99 01:19:57 PM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to David Sargeant <david@HPLX.NET>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: Pocket references (esp quotations)




On Thu, 11 Nov 1999, Longden Loo wrote:

> Is there a good quotation reference for the LX, comparable to an
> updated (not the 1901 version) of Bartlett's?

Somewhere around here, I have a version of CorrectQuotes for DOS that runs
just wonderfully on the 200LX.  It fits on one floppy disk, too.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 14:36:04 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Terry A. Ward" <terrywa@ELP.RR.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Terry A. Ward" <terrywa@ELP.RR.COM>
Subject:      HP 2100TN and IrDA printin
Comments: To: Longden_Loo@CANDLE.COM
In-Reply-To:  <88256826.00717963.00@n-smtpmta.candle.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Does anyone know if the HP200LX can print to the 2100 Laserjet via the IR
connector on the printer?

Thanks!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 14:03:10 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Wachtel, Andrew, S., M.D." <Andrew.Wachtel@CSHS.ORG>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Wachtel, Andrew, S., M.D." <Andrew.Wachtel@CSHS.ORG>
Subject:      Re: HP 2100TN and IrDA printin
Comments: To: "Terry A. Ward" <terrywa@ELP.RR.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

YES IT DOES WITHOUT ANY NEW DRIVERS

> -----Original Message-----
> From: Terry A. Ward mailto:terrywa@ELP.RR.COM
> Sent: Thursday, November 11, 1999 1:36 PM
> To: HPLX-L@UCONNVM.UConn.Edu
> Subject: HP 2100TN and IrDA printin
>
>
> Does anyone know if the HP200LX can print to the 2100
> Laserjet via the IR
> connector on the printer?
>
> Thanks!
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 17:04:25 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: Morphy one
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Fred,

> Excellent question.  I, personally, would be lost without the built-in
> PIM stuff, particularly the appt application.

What about betatesting PIM/PE from www.dasoft.com

Should run even on a future DOS machine 8-)

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 17:04:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: Word on the palmtop
Comments: To: David Ball <dmb10@SWBELL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> That is one compelling argument.  However, since PE is also free and it
> meeds most of my needs (and all my needs for the palmtop), I think I'll
> stick with it for now.  Just of curiousity, though--how much filespace
> is Word 5.5 for DOS?

1 MB with exe, ini and hlp file
0.7 MB just with exe and ini file

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 22:45:51 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Subject:      Thanks to Andreas
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I would like to give a public Thank You to Andreas Garzotto and the
support he gives to his software (PE/PIM).

I got one bug fix (TAB character) and one new feature (ISO dates) in one
week, and this for a free software!

Just a happy customer.
Paulo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 23:10:49 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Subject:      Re: Time Tracking...
Comments: To: Steve Dowell <sdowell@HARRAHS.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I use a home created solution: A text file that I keep open in PE, with
a short-cut menu to edit it at the last line, where I just write the
time I start a new task and a task menmonic, as in:

        ; 1999-11-11
         9:30 proj1
        10:05 proj2
        10:55

As I have to report my time sheet weekly, I have one new text file per
week.
A simple Perl4 script collects the time for each project and displays
the total for the text file. The lines started by ';' are just comments.

I can send the script off-list, if there is interest.

I have also tried TimeTracker/LX, and it would be a very nice program,
if it was an EXM. Being an EXE, it does not allow me to have another DOS
session running at the same time.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 23:32:33 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              jason bugler <kovaxal@HOTMAIL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         jason bugler <kovaxal@HOTMAIL.COM>
Subject:      1000cx software?
Mime-Version: 1.0
Content-Type: text/plain; format=flowed

Hello people,

    I just aquired this used 1000cx from the internet and am having trouble
hooking it up to a windows machine, I don't seem to have any software loaded
on it with the exception of llra1-4.exe and some other language libraries.
  Is llra what I use to connect to the machine?  If not, what software do I
use and how do I get it on the palmtop?

    I have the newest software from HP for the desktop to connect to it but
it says I need the connection server to be running on the palmtop at the
same time.  This is what software I need I take it.
Is there any other way to connect to it?  Can I already with llra?

Thanks in advance.
-J

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 23:49:59 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              chris@AMLOG.DEMON.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Randle <chris@AMLOG.DEMON.CO.UK>
Subject:      Re: Time Tracking...
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="__next_part__1295437294__"

--__next_part__1295437294__
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

I too looked at TimeTracker/LX, but went back to using a 1-2-3
spreadsheet that I wrote. It has no timer, but you can use
Fn-Time to insert your start and stop times. Basically, you
enter Date, Time Start, Time Stop and Description.

Within the sheet, it can handle:

* A standard hourly rate

* %age discounts from std rate for each entry

* A no-charge column which lets you give the customer a
"freeby", but records that the work was done.

* Time idle within a block (e.g. I worked 10am to 2pm, but
took 30 mins for lunch, so you don't have to make 2 or more
split entries)

* Invoiced yet, Y/N

The sheet shows totals for:

* Days & hours worked/discounted/total

* To invoice/not yet invoiced/no charge work/grand total

Of course, externally, as files, you can have a file per
customer, or per project, or organise via directories, as you
wish.

Best of all, if it doesn't work the way you like, you can
meddle with it!

Anybody who wants a copy, e-mail me off-list
(chris@amlog.demon.co.uk) and I'll send you it with some
instructions. Say if you prefer v2.5  PKZipped (2895 byes) or
uncompressed (16061 bytes)


On Wed, 10 Nov 1999 15:20:46 -0600, Steve Dowell wrote:

> I was looking at a time tracking program that I got from SUPER called
> TimeStax. Nice little program, and it seems to do all the stuff I need.
> It even has a nifty 'timer' function that lets me start and stop timers
> on the various projects I work on through out the day. Does reports
> pretty nicely too.
>
> However, I decided to Y2K test it. I tried keying in a date of  01/01/00
> and it wouldn't take it. Bummer.
>
> Does anyone have suggestions for a DOS time tracking program (preferably
> free) that you know is Y2K compliant? Also, I'd really like to find one
> that has that 'timer' feature.
>
> I know some of you will suggest TimeTracker/LX (and I may end up going
> with that), but I'd like to check out some free ones first.
>
> Suggestions?
>
> TIA,
> Steve
--__next_part__1295437294__
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit


Chris Randle (chris@amlog.demon.co.uk)



--__next_part__1295437294__--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 23:49:55 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              chris@AMLOG.DEMON.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Randle <chris@AMLOG.DEMON.CO.UK>
Subject:      Re: PE/PIM
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="__next_part__1295445341__"

--__next_part__1295445341__
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Bob,

I've just created a new file in PE called a23456789.txt (i.e.
9+3). I added some text and closed PE. It asked if I wanted to
save the changes; I said yes. I now have a file called
a2345678.txt which contains my added text.

Did I do something different from you?

Chris R.


On Tue, 9 Nov 1999 18:00:35 -0800, bobv <bobv@SOS.NET> wrote:

> Andreas,
> I just had a sad awakening with a little undocumented feature of PE.
> within SRCLIST, I mad eseveral files all with a txt extension.
>
> Then I opened pe and proceeded to work.
>
> After some time, I closed pe to do something else. On reopening, there
> was no information in one of the files (it didn't save)
>
> After a little figuring, I noticed that I had not counted the number of
> letters in the file name (it had 9 letters + extension).
>
> A nice addition would be to trim the first 8 letters and still save the
> file.
>
> Thanks
> Bob
--__next_part__1295445341__
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit


Chris Randle (chris@amlog.demon.co.uk)



--__next_part__1295445341__--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 00:10:06 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: 1000cx software?
Comments: To: jason bugler <kovaxal@HOTMAIL.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Hello people,
>
>     I just aquired this used 1000cx from the internet and am having trouble


I wish I knew more about the llra stuff in the 1000cx but don't.  So....

You might want to check out:

ZIP.COM (47.793 K) added 12/20/98
Version 2.12 by Eric Meyer

Courtesy of The HP Palmtop Paper
Fast File Transfer program between Palmtop and other computers.
Shareware

at www.palmtop.net

And then make sure you use the correct cable connection.

Obviously, there are other ways but getting the first communications
module on the HP will be necessary without a filer version.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 19:31:58 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Re: Morphy one SW
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Actually plane vanilla is OK, so long as it runs
> the conectivity pack as does the PC110.
> Anyone ever do this on the Libretto?
>
> Course the CPack can be improved up on :).

Unfortunately, I seem to recall the CPack requiring EGA as
minimum, which won't work with the Morphy One's CGA display.

The ideal solution would be to use the System Manager and
application code from the LX ROMs, but that's got
next to no chance of happening from what I remember of
previous discussions along those lines :-(

Perhaps someone knows of a good System Manager clone out
there that works under DOS and CGA? For me, the most
important applications are the Phonebook and Application
Manager; I imagine that you would need some sort of TSR
solution for alarms on the Morphy One.

 -Mike http://games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 19:52:56 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Arachne update
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I've established a correspondence with Michael Polak of xChaos Software, the
developer of Arachne and he's continuing work on the 1.60b version that will
have better support for LX's. Fyi, there is an Arachne listserv available
that will inform you of updates to the program. Send a message to
listserv@arachne.cz with "subscribe arachne-announce", minus the quotes in
the message body.

He sent me the following question and since I'm more of a text mode guy, I
don't want to give an answer that I'm not totally sure about (his e-mail
address is xchaos@arachne.cz):

>However, I have heard, that LX maybe has 4 shades of gray in 640x200;
>is it true ? If yes, how video memory is structured, and what is number
>of the mode (if it is standar IBM PC graphical mode, with mode number
>like CGA or standard VGA modes have..) ? The resultls of graphical
>rendering may be pretty good in greyscale mode.

Has anyone set up an LX programming faq that I can direct him to?

__ms__

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 19:54:23 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Good to know I'm not going bonkers :)

__ms__


>> Also, is it just me or has anyone else had some problems with Buddy's
>> SmartCaps feature in Word 5.5? On my single-speed units, the capitalized
>> characters do not display until I type in the next one.  I haven't had
this
>> problem w/WP 5 or in any other DOS apps either.
>
>Same in Word 5.0, just for your info.  You get use to it but it is
>disconcerting at first.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 02:35:10 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              jason bugler <kovaxal@HOTMAIL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         jason bugler <kovaxal@HOTMAIL.COM>
Subject:      Re: 1000cx software?
Mime-Version: 1.0
Content-Type: text/plain; format=flowed

>Obviously, there are other ways but getting the first communications
>module on the HP will be necessary without a filer version.

If I could just get connected to the handheld I would be fine, what needs to
be running on the handheld for it to establish communications with the
desktop? the filer?
It looks like lap link program would work fine if I knew how to use it.

ANYONE? =)

- J

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 22:04:19 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Speed Reading Software
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

I found my old copy of Speed Reader, a neat program which works on the
hpx.  It used to be on Simtel (although I think it was in Coast to Coast,
not in Keith Petersen's new Simtel.   How do I send it to SUPER?  The zip
is only 10k
It presents all text in a fixed window, which works very well with zoom.
The behavior is somewhat unpredictable, but it works well enough for the
purpose.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 21:34:56 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: MS-Works
Comments: To: NickumRH@BV.COM
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

Is it true that Works version 2.0 is not Y2K compliant?   Where do I
check for this info?   What happens in Y2K?

TIA

Domingo

On Thu, 11 Nov 1999 07:34:39 -0600 "Nickum, Roy H." <NickumRH@BV.COM>
writes:
> Domingo & Bruce, I have installation disks for both versions 2 & 3.
> Let me know off the list what you need (copies each disk as separate
e-mail
> attachments or a copy of an installed set or ?) and I will dig them
> out and try to help you.
> _________
>
> Domingo <ddvteach@JUNO.COM> wrote:
>
> <Bruce_Martin@MANULIFE.COM> writes:
> >
> > Does anybody know where I can get a copy of Works 3.0 or whatever
> the last DOS version was?
>
> Do you by any chance have the installation disks for version 2.0?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 22:17:56 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Re: Morphy one SW
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> For me, the most
> important applications are the Phonebook and Application
> Manager; I imagine that you would need some sort of TSR
> solution for alarms on the Morphy One.

When I said "Application Manager", I actually meant
"Appointment Book". Although, I find the Application Manager
fairly handy as well! :-)

But thinking about a plain DOS box, which is what the Morphy
One looks like being, it struck me just how much use I made
of all the built-in apps. I never really noticed just how
essential they actually were up until now.

 -Mike http://games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 21:27:15 -0600
Reply-To:     Mack Baggette <mack@times2tech.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mack Baggette <mack@TIMES2TECH.COM>
Organization: Times2 Tech
Subject:      Re2: Morphy one SW
In-Reply-To:  <HPLX-L%99111122175573@UCONNVM.UCONN.EDU>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> But thinking about a plain DOS box, which is what the Morphy
> One looks like being, it struck me just how much use I made
> of all the built-in apps. I never really noticed just how
> essential they actually were up until now.

They way I look at it is that you will have such a faster more powerful
machine that using something like DOSShell should work great for working
with multiple applications, etc. Hopefully the void can be filled by
individual apps. You can always run an INT5F tsr for PAL apps also.

Cheers,
 Mack                            mailto:mack@times2tech.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 21:32:56 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: HPLX-L Digest - 9 Nov 1999
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

Hi Tom,

>My message is what originally started this thread.  I have a copy of
acCIS
>v4.0 that I'd like to sell for $45 (including shipping in the US).
Price
>from Shier.com $89.

Thanks for offering the copy of acCIS v4.0. I'll take it for $45, but
since I'm on vacation right with no way to recieve mail or packages, I'll
have to get back to you when I return home on Tuesday.  I'm with email
access only occasionally until then.

So, if you can wait till Tuesday, Please write me privately with your
address and I'll send you the $45 when I get back home. :-)

BTW, my attempt to export a mail file didn't work well, so I'm reading my
mai now without headers. Excuse me if I have your name wrong. :-/

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 22:40:47 -0500
Reply-To:     garyc@tir.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Gary F. Carne" <garyc@TIR.COM>
Subject:      html editor for the hplx
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Does anyone know of an html editor that will run on the HPLX?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 21:53:41 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: 1000cx software?
Comments: To: jason bugler <kovaxal@HOTMAIL.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Fri, 12 Nov 1999 02:35:10 GMT, jason bugler <kovaxal@HOTMAIL.COM> =
wrote:

> If I could just get connected to the handheld I would be fine, what =
needs to
> be running on the handheld for it to establish communications with the
> desktop? the filer?
> It looks like lap link program would work fine if I knew how to use it.

The flash card route is the quickest way to get something on the 1000. If
you don't have a desktop with a PC card slot, call a local computer store
and see if they would be kind enough to let you just kinda borrow one of
their demo display models for about five minutes to tranfer files to the
flash card.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 22:08:34 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <swdowell@BELLSOUTH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <swdowell@BELLSOUTH.NET>
Subject:      Re: Morphy one SW
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I agree. It would need something like Appt.
I _rely_ on my LX to turn itself on and beep at me when something I'm
supposed to remember comes up!

Steve
----- Original Message -----
When I said "Application Manager", I But thinking about a plain DOS box,
which is what the Morphy
One looks like being, it struck me just how much use I made
of all the built-in apps. I never really noticed just how
essential they actually were up until now.

 -Mike http://games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 22:22:40 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <swdowell@BELLSOUTH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <swdowell@BELLSOUTH.NET>
Subject:      Re: Morphy one SW
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Do you suppose you could run Doom on this thing? That would be kewl. <g>

Steve

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 22:35:59 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      Re: Speed Reading Software
Comments: To: Larry Feldman <lfeldman@USA.NET>
In-Reply-To:  <HPLX-L%99111017300675@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

Larry Feldman wrote:
>The package in question is the "Evelyn Wood Dynamic Reader" - a package
>which was published years ago by Timeworks.

There is a pretty good Straight Dope column from 1992 about speed
reading: http://www.straightdope.com/classics/a920214.html

--=20
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 22:40:46 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      Re: html editor for the hplx
Comments: To: garyc@tir.com
In-Reply-To:  <382B8C3E.397C7F40@tir.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

Gary F. Carne wrote:

>Does anyone know of an html editor that will run on the HPLX?

It's not what you're asking, but I advise to just write the HTML in
text, for which Memo would work fine. I write lots of HTML on a PC,
and I do it all on a regular text editor. Well, maybe not regular -
it's the best text editor I've ever seen by far, highly recommended
and available at www.notetab.com

--=20
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 21:46:57 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      Re: Re6: Newer version of ATA driver
Comments: To: Mack Baggette <mack@times2tech.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

i have succeeded in the 100LX accepting Mr.!!!'s ATA cards by using Mack's
beta ata3.exe
it creates drive 'F', which needs to be selected in Filer and split in the
window

i wrote:
> > with my config.sys has the device=c:\ata3.exe in line 3 i reboot (your
> > copyright shows) and then i try filer with the ata card in it, but filer
> > only shows c: directory, and memo won't go to a: (it beeps)

Mack answered:
> If you use it as DEVICE=c:\ata.exe then it creates a separate drive letter
such as
> F: or whatever the next letter in line is at load time.  You might also
> want to run it as the last line in your CONFIG.SYS.  If you load it with
> INSTALL=c:\ata.exe then it takes over the A: drive, but then your A: drive
> won't support SRAM or ROM cards, which may not be a big deal for you.  I
> plan on supporting those cards next.
>
> > hope that helps?
>
> The newer version won't help the problem you are currently having, but it
> is a much better version power wise
>
> Cheers,
>  Mack                            mailto:mack@times2tech.com

Mack, what do you want me to test further with your new ata4 version?

 regards from    __o     Nathalie
 avec LX       _(\<._    exercice
 en France    (_)/ (_)   ...petit tour du beau paysage

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 05:18:33 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Morphy one SW
Comments: To: Mike Wagstaff <aj93@DIAL.PIPEX.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> > Actually plane vanilla is OK, so long as it runs
> > the conectivity pack as does the PC110.
> > Anyone ever do this on the Libretto?
> >
> > Course the CPack can be improved up on :).
>
> Unfortunately, I seem to recall the CPack requiring EGA as
> minimum, which won't work with the Morphy One's CGA display.
>
> The ideal solution would be to use the System Manager and
> application code from the LX ROMs, but that's got

Actually, the ideal solution would be to be able to re-use the HP's rom
in the new unit in some fashion.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 21:25:05 -0800
Reply-To:     patrickwest@uswest.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: HP 2100TN and IrDA printin
Comments: To: "Terry A. Ward" <terrywa@ELP.RR.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

YES, it can!
This is the printer I have at work. I love it. I use two different sets
of IR
drivers for it. One set for DOS appps and another for for the internal
EXM apps.

I use the Jeteye drivers from SUPER (irjeteye.sys 12-22-94) for dos,
And The August 1997 Nicholas Chan, Singapore, drivers for the internal
apps. (also SUPER)


"Terry A. Ward" wrote:
>
> Does anyone know if the HP200LX can print to the 2100 Laserjet via the IR
> connector on the printer?
>
> Thanks!
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 23:30:28 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      WDBLOAD and WDBDUMP available
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

Hi all,

The WDBLOAD and WDBDUMP programs are now available. They let you
export comma-separated values (CSV) text data out of a World Time
file, and import CSV data into one. It seems to work, but if you have
modified your WDB file be sure to back it up before loading.

By the way, Note fields are included in the import/export.

Also included is a sample CSV file, containing all the cities in the
US with population over 15000. I put the time zone and
daylight-savings info into it with Excel a state at a time, so in
states which have more than one time zone, some of the cities will not
be correct. But the latitude, longitude, and population should be
according to the Census department.

They're available at:
http://cameron.hplx.net    (alias)
http://members.aol.com/freewhL44/lxgames.html
ftp://members.aol.com/freewhL44/wdbio.zip

--=20
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 20:24:33 -1000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Graham <bgraham@HAWAII.RR.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Graham <bgraham@HAWAII.RR.COM>
Subject:      Re: Morphy one SW
Comments: To: Mike Wagstaff <aj93@DIAL.PIPEX.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Mike - The Phonebook is a special case of the Database. So if we have Database we
have it covered.

Aloha - bob     \ooo_

Automatic digest processor wrote:

> ------------------------------
>
> Date:    Thu, 11 Nov 1999 19:31:58 -0500
> From:    Mike Wagstaff <aj93@DIAL.PIPEX.COM>
> Subject: Re: Morphy one SW
>     ...........snip..........
> there that works under DOS and CGA? For me, the most
> important applications are the Phonebook and Application
> Manager; I imagine that you would need some sort of TSR
> solution for alarms on the Morphy One.
>
>  -Mike http://games.hplx.net

--
        -------
<http://home.hawaii.rr.com/bgraham/>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 23:39:52 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              ian Butler <ian@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         ian Butler <ian@HPLX.NET>
Subject:      Re: Re2: Morphy one SW
Comments: To: Mack Baggette <mack@times2tech.com>
In-Reply-To:  <15893.991111@times2tech.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 11 Nov 1999, Mack Baggette wrote:

> They way I look at it is that you will have such a faster more powerful
> machine that using something like DOSShell should work great for working
> with multiple applications, etc. Hopefully the void can be filled by
> individual apps. You can always run an INT5F tsr for PAL apps also.

Let's not forget that NewDeal would run quite well on a 486 (really, the
only issue with it on the palmtop is speed).  And Win 3.1 running Calmira
and some good older apps like WordPerfect 6.. unf.  I'm not sure if Calmira
(or Win 3.1, for that matter) supports CGA or not, but..

ian Butler / ian@hplx.net
http://peace.hplx.net/

"The grass is dead."  - Chris Syverson

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 23:23:40 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: OT:Fluffiness...
Comments: To: Ken Hansen <khansen@NJCC.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Ken Hansen <khansen@NJCC.COM> wrote:

> I think a lot of what you are seeing is the *existing* HP LX
> community "doubling-down" on their bet on the 100/200LX
> platform, but your perspective (as a vendor) is different
> from mine (as a customer).

I rather doubt that. We sell software. Our customers do not
buy a second license for their software when they get a second
palmtop! I also see new names, primarily, not the same
customers buying second and third license.

Form my point of view, I think there is real growth in the
200LX arena, despite the fact that it is almost illogical, the
machine being discontinued. This I believe comes from the
increased awareness of the market in the inadequacy of the
WinCE, and some discomfort with the paradigm in the other
growth are, the PalmPilot.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 23:23:43 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Using 200LX as WWW browser
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

"Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU> wrote:

> You should also be aware David that HV does not support
> extended character sets. This means that Web sites that use
> "typographers' quotes" (i.e. ones that are angled properly
> like you see in books, newspapers and most new word
> processors) and other characters are turned into dashes.
> This can make reading newspapers online rather annoying.

This is not a function of HV per se, but the fonts you use.
And in fact, HV supports nicely the double-character fonts as
in Japanese Kanji.

> Still, HV is very easy to use and has the look and feel of the
> built-in apps. Why don't you download the shareware version
> and decide for yourself.

HV itself is freeware. WWW/LX Plus (which includes the HV
freeware) is available as a demo version of a commercial
program, not shareware. The demo version is quite limited.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 23:23:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Using 200LX as WWW browser
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> >You should also be aware David that HV does not support extended character
> >sets. This means that Web sites that use "typographers' quotes" (i.e. ones
> >that are angled properly like you see in books, newspapers and most new
> word
> >processors) and other characters are turned into dashes.  This can make
> >reading newspapers online rather annoying.
>
> I also neglected to mention that HV does not support a _very_ typical method
> that Web page authors use to make the beginnings of lines indented (the
> &nbsp; tag). Instead of giving you a blank space, HV gives you an underscore
> (_).

Change the font you use to include a space where the value for
&nbsp; should be. It is a finction of the font, not HV.

> Even though I wish it supported these features, it _is_ a solution for
> DOS-based handhelds nonetheless. I don't have my Windows CE unit around any
> more but Web browsing is one area (perhaps the only one ;) where CE beats
> the LX hands down...at least for now.

It already supports what you want. I agree it is _a_ solution
in DOS, but I also think it is not a perfect solution, it has
many shortcomings which we will not likely be able to fix. In
the browsing, Pocket-MSIE (which does the browsing in the CE
machines) is by far a better tool. It is not likely that the
200LX will have a better browser from us. The limitations are
memory for program. Can't fix it with the current chip. If we
move to a 486, we'll revisit the issues. But then, you could
run a full Netscape or MSIE - so maybe we won't compete there
either... :-)

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 23:23:55 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: 1000cx software?
Comments: To: jason bugler <kovaxal@HOTMAIL.COM>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

The problem for most of us on the list is that our 100/200 LXs have llra also
built-in, but we use it in conjunction with other software that's not on the
1000CX.  Not to say that we couldn't make it work (as with the 1000CX), but I
doubt that very people have tried, and so very few (if any) will know how to
connect using laplink alone.

The two most common file transfer programs for the desktop (Connectivity Pack
and Transfile) require the 100/200LX Filer program, which is a special ".exm"
executable requiring special loaders and runtime libs that I don't believe are
on the 1000CX.

Another method using LapLink (the llra programs), require copying some of the
llra1-4 files to the PC, but the palmtop is then set into server mode using
yet another EXM (for LapLink Remote).

We also transfer to the PC using standard communications packages (like
Hyperterminal on Win95), while running DataComm on the LX (another EXM).

So the suggestions others have made (using zip.com or copying via a borrowed
flash-card and notebook computer) may be needed to help get you started, in the
absence of any documentation on using llra that came with your 1000cx (our 200LX
documentation only explains llra in terms of using it in conjunction with the
EXMs I've already mentioned).

If someone else on this list is fluent in "Laplink-ese" and its use in a pure
DOS environment (ie, no EXMs), they may be able to help you.

Good luck.

- Longden





jason bugler <kovaxal@HOTMAIL.COM> on 11/11/99 06:35:10 PM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to jason bugler <kovaxal@HOTMAIL.COM>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: 1000cx software?




>Obviously, there are other ways but getting the first communications
>module on the HP will be necessary without a filer version.

If I could just get connected to the handheld I would be fine, what needs to
be running on the handheld for it to establish communications with the
desktop? the filer?
It looks like lap link program would work fine if I knew how to use it.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 10:58:50 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: 1000cx software?

jason bugler writes:
>   Is llra what I use to connect to the machine?  If not, what software do I
> use and how do I get it on the palmtop?

LLRA1-4 are a set of TSR programs which will let you connect your palmtop
to another PC running the same software. The Hp200LX also has an EXM program
which is basically a user interface for these programs but is not neccessary
to run them. In order to run them you also need LLRA1-4 on the PC to which
you want to connect. There is a detailed explanation on how to set this up
under (for example Windows 95) on the S.U.P.E.R. site (www.palmtop.net) under
the section "Hacking with Jorgen", but once again you need to have the
programs on your PC. They are supplied with the HP Connectivity Pack but the
programs on your palmtop can be used on a PC - if you can get them there.

No matter what connectivity solution you use, you need to have a similar
program on the PC and on your palmtop. (Viscious circle isnt it?).



======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:19:11 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Palmtop Circuit user report 1 of 2
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

PART 1 OF 2

Hi friends,

As some of you know, I bought Palmtop Circuit from Design Soft a few
months ago. Maybe you remember the problems Tamas had with Design Soft
when he tried to convince them to sell PaCi to us. But he did it - and
I'm very thankful for that.

Design Soft sold it only because of a promise that they got abt. 10
orders (I didn't remember the exact number). I don't know if they got
all these orders, but I doubt it, because noone is reporting or asking
about it on this list.

So I now want to let you know my experiences with Palmtop Circuit.
Maybe this helps some of you to decide if you want to buy it or not.

First of all let me say, i never used PSpice or another circuit
analysis program, so I'm not able to compare PaCi with one of these
products.

And: I have no relation to Design Soft, so I have no interest in
advertising PaCi. The reason for that I'm writing this report is, that
I remember the long discussions with Tamas Feher who contacted Design
Soft to convince them to sell PaCi to us.

I want to thank Tamas for his efforts, because I now find that PaCi is
a really great software!

About PaCi:

PaCi is a software package (installed size about 800k-1M, depending on
installation of sample files etc., cost 80 US$, if I remeber correctly,
but for exact price please ask Tamas Feher, he is also a list member)
that lets you design AND analyze electronic circuits with a high
complexity. The manual says 'more than 100 nodes, depending on amount
of RAM' - I didn't reach the limit by now... ;-).

It's able to do DC, AC and transient analysis of linear and non-linear
electronic networks.
The look of the drawn circuits is not as good as probably of the newer
PSpice products, but it does its job very well.

The manual of PaCi is _extremly_ good - a short introduction, then
follows an exercise by means of an example RLC-circuit, and after that,
all the menu items (there are much!) are described.
What's also worth to be mentioned is that the principles of the program
are also described in the manual.
You can read there about Laplace transformation, Fourier
transformation, Fibonacci' search method, Gaussian elimination method
for solving equation systems and much more.


Now I'll tell a little bit about the work with PaCi:

After you started PaCi, you see a screen that is similar to a drawing
software. A grid, a menu and a status line.
If you press '=', a list appears, where you can choose a component. Now
you can move down with arrow keys or you can press the shortcut 'CA' to
jump to the capacitor. Press enter, and the capacitor is shown on your
work sheet. Now you can move, rotate and mirror it until you have it in
the right position. Press enter. It is now fixed in its position and a
window appears where you can set all parameters of the capacitor,
including a label.
Now you can press '=' again and insert the next component of your
circuit and so on.
If this is finished, you can connect all components with wires by
pressing the space key.

Now you can analyse the circuit. For example you can let PaCi draw the
Bode diagram. You press Menu,A,A for menu/analysis/AC analysis and then
move the cursor to 'Bode diagram'. After pressing enter, you have to
enter a few parameters for the diagram: frequency range, number of
points to be calculated. If you now click on 'Calculate', the diagram
will be calculated (that takes about 5-30 secs, depending on how much
has to be calculated) and displayed. You can print the diagram or
export as HPGL file (this can also be done with the circuit itself, of
course!).

You can let show the Bode diagram for both amplitude and phase
characteristics of the circuit.

Of course, it's also possible to calculate the transfer function or
time function of a circuit.

END PART 1 OF 2


--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:19:14 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Palmtop Circuit user report 2 of 2
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

PART 2 OF 2

It's also possible to watch the transient behaviour of a circuit: For
example, if you create an RLC-circuit

----R----L------
               |
               -
               C
               -
               |
--------------------

and you want to know the output voltage if you switch the inoput
voltage from 0 to 1, you can do this by pressing
menu/analysis/transient analysis
and set a few parameters.
If you then press 'calculate', PaCi will show you a nice diagram
looking like this:



                      .
                     ..
                    ..
                  ..
                ..
            ...
       .....
.......


where the x-axis shows the time and the y-axis shows the output
voltage.
(the diagrams PaCi draws are much prettier than my ASCII-drawings!)


PaCi also has a built-in text editor which you can use to place text
(own descriptions or functions created by PaCi) into the current
graphic (circuit or diagram).

Further features I didn'T use by now:

- Optimization of parameters of a circuit: You can give special
parameters the circuit has to have and PaCi can calculate the best
values for components.

- poles and zeros diagram for circuits

- built-in interpreter: it allows to define arbitrary formulas and then
draw them on the screen. In additin to the standard mathematical
functions several auxiliary functions and access to the component
parameters of the actual circuit are provided.



I think I now have covered the most important features of PaCi.
I have set up a few screenshots and further informations on my home
page - you can have a look at them at

http://daniel.hplx.net/palmtop.html .

Sorry that I didn't use a screen capture program to make the shots - it
was too much trouble for me to convert them into a format that also on
windows browsers look like the screen of the LX.

If you have further questions about PaCi, please contact Tamas Feher
<etomcat@egon.gyaloglo.hu>.

I hope I didn't forget something inportant in this report. If I did,
others who bought PaCi, please chime in here!

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 04:47:57 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: DBCheck finds errors in appt.adb
Comments: To: Fryday <fryday@CALIFORNIA.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Tried the latest version of DBCheck and it found some linking errors in
> appt.adb, and these look like old/deleted records. Question is, what should I do
> with those? It doesn't seem to have any negative impact on access to any of the
> records... and besides, I can't even see them in Appt.

This doesn't really answer your question, it's just some of my recent
experience.  I started running DBCHECK after I'd been using my 200LX for
over two years.  It didn't find any problems ...at first.  When I
started having db problems I found I couldn't reliably go to a recent
backup.  While the backup checked ok it quickly became corrupted as I
started using it.  I can only assume my db had some serious problems
that DBCHECK was not able to detect.  I have sent the bad db to Curtis
so it might help future improvements to DBCHECK.

My solution was to 1. use dbcheck to dump the appt.adb contents to a
readable file to give me any idea what I had collected.  2. I erased the
appt.adb file so I could start over fresh.  3. using the txt dump of the
old db I was able reenter most of the important stuff in the new db (and
leave out a lot junk too).

I'm guessing DBCHECK is really useful when you start running right away
while a db is still relatively new.  If, like me, you start on an older
db, it could be broken in subtle ways that DBCHECK currently can't
detect.

I still backup my dbs using DBCHECK; it's our best tool and keeps
getting better but it isn't perfect (yet).

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 10:39:04 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John Waller <hp100lx@JWALLER.DEMON.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John Waller <hp100lx@JWALLER.DEMON.CO.UK>
Subject:      Re: 1000cx software?
In-Reply-To:  <199910121058.PNR05069@netmedia.net.il>

>jason bugler writes:
>>   Is llra what I use to connect to the machine?  If not, what software do I
>> use and how do I get it on the palmtop?
>

If you get a full copy of Laplink onto a PC (and the correct serial
lead) then this has the feature to install itself remotely on another
PC that only has the DOS standard MODE and CTTY commands on it. (I
think CTTY may be part of the COMMAND.COM command interpreter).

However llra may be the bit that Laplink talks to anyway, so all you
need to do is buy a copy of Laplink. I've not ssen Laplink advertised
recently so you might have to search around for it.

John

|============================================================================|
 John Waller
 john@jwaller.demon.co.uk
 Listening to the music the machines make......
|============================================================================|

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 12:27:32 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      Log-in problem with new ISP
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi, fellow palmtoppers,

trying to connect to a new ISP, my modem dials allright and
CONNECT 14400/REL-LAMP V42. BIS appears on the screen. After
that: garbage letters and eventual disconnect from the ISP
side.

In the old days this used to happen when the parameters speed,
parity, data bits and stop bits were not synchronized. So I
tried all kinds of combinations - to no avail. I could not
provoke the ISP computer to ask me in intelligible letters
anything like "logon:" or "host:" or a password .

So I studied the scripts for various ISPs on the DASOFT site.
Responses to the CONNECT message are either a carriage return
(s=3D\r) (Welchlink, CRIS) or waiting for a star in order to
send what seems to be the host identification (s=3DC NSP\r) or a
carriage return right after dialing to wait for "ogin"
(NETCOM) or "name" (TELEPAC), or "in:" after CONNECT (MCS). I
tried all that with varying parameters for speed, partiy, and
data and stop bits. - No success.

Soliciting help from the ISP was useless, - they know nothing
but Windows icons - even counterproductive, as learning that I
connnected with a DOS communication program made everybody
panic. Their relatively most pertinent questions were, which
processor my computer had (I had to confess to a 8086), and
which version of DOS (DOS 5.0 seemed rather old to them,
too).

So I settled for connecting with Windows 95 on my desktop with
their help to infer from there what would have to be done on
the LX. That communication works (parameters: no parity, 8
data bits, 1 stop bit). Surprisingly, however, little could be
learned from it, apart from the parameters. Bringing up the
DOS window in Win 95 after dialing (in Dial up Networking
clicking on the new connection, then properties / configure /
options) showed that in Win95 the ISP modem sends garbage
letters too (or my modem does not know how to interpret their
data) so I cannot see what their modem is waiting for from my
side.

Could anybody give me any clues how to proceed ?

Thank you in advance
Winfried

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 06:31:47 -0500
Reply-To:     RickRae@usa.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rick Rae <RickRae@USA.NET>
Subject:      Re: HPLX-L Digest - 9 Nov 1999
Comments: To: jonzann@ALTAVISTA.NET
In-Reply-To:  <005f01bf2b8b$d898bc00$0c509ec7@jonzann>
Content-Type: text/plain; charset="ISO-8859-1"

>> I want to setup a network at home.  I am planning on running the cat5
wiring
>> out through my office closet upstairs, through the wall to the outside
of
>> the house, down the side of the house to the first floor.  Then I will
run
>> it in through the wall in the location of my sons computer.
>>
>> The question is, can I use one of those surface mount 8 pin modular
jacks at
>> radio shack to make the connections in the office and on the wall
>> downstairs?  Or will that mess up the network?
>
>You *Could* use them, but they're not likely to be CAT5. They might
>support 10 Mbps, but 100 Mbps would be problematic.

<Nodding> I'll support what Jon's told you.  It will *probably* work at 10
MBPS.  But the cost differential isn't that great, so "probably" may not be
a good tradeoff.  I always figured, a network is something you only want to
install *once*... best spend a few extra bucks and do it high-class.

In addition, what's the total length of the run around those corners, out
the wall, etc?  If you're getting close to the TP limit, you might want to
consider 10base2 (thin Ethernet coax).

You might have a bit more flexibility for not much more cost if you put a
small hub at each end, with 10base2 coax between 'em.  Then you can jack in
"n" additional devices on either end without killing the network each time
you change cables around or unplug something, plus you get the longer run
length and the potentially higher noise immunity from the coax.

Here's my setup at home, to give you an idea of how I approached it.  In my
office, I have an eight port hub.  One 10baseT port talks to the main
computer, a second to my development machine, the third to our main color
printer.

In my wife's office, there's a second eight port hub.  One port goes to her
main machine, a second to our laser printer, a third to the photo-realistic
color printer she uses for her publishing business.

Downstairs in the server closet, there's a third eight port hub.  One
port's for the basement server and router logger, a second's for the router
connection that ties me to the outside world.

Now, all three of those hubs are connected together with 10base2 coax, and
those connections "never" get pulled off.  So, I wind up with three or four
additional connections ready to roll in each area, plus flashy lights to
tell me when data's going where (which helps tremendously when
troubleshooting).

It costs a little more -- you can figure about $50 per hub for small ones
if you shop around -- but I really think it's a superior approach in a lot
of ways.  Anyway, just food for thought.

Rick

P.S. While I'm on that subject, I guess I'll mention sort of as a
full-disclosure disclaimer that I bought in bulk to get a good price on the
10base2 cable I needed to wire the house.  So I have about 1,500 feet of
the stuff (NON-plenum rated, btw) available if anybody needs to do a run.
Anyone interested can give me a yell via email.

P.P.S. On the "plenum-rated" thing: That's normally only an issue if you're
running it through an air plenum; i.e., an active air duct.  As I
understand it, the idea is that, in the event of a building fire, you don't
want PVC catching on fire and poisonous fumes being ducted into the area
from which you're trying to escape.  If you're running along a drop ceiling
but *outside* of ducts, or down interior walls where there's no air flow,
plenum-rated cable is, I am told, not required.  Now, there is no reason
NOT to use plenum-rated cable, ever; it's 110% safe everywhere. But it also
costs significantly more.  So, unless you have an explicit need for it,
using plain old PVC-jacketed cable will save you some bucks.  You'd want to
check local codes to be sure, but I *believe* the above is the case pretty
much everywhere (however, please apply the appropriately-sized grain of
salt!)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 13:53:54 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Andreas Garzotto <garzNOSPAM@IPROLINK.CH>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Andreas Garzotto <garzNOSPAM@IPROLINK.CH>
Subject:      Re: Log-in problem with new ISP
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Winfried Zettelmeyer wrote:
> trying to connect to a new ISP, my modem dials allright and
> CONNECT 14400/REL-LAMP V42. BIS appears on the screen. After
> that: garbage letters and eventual disconnect from the ISP
> side.

If you see "Garbage", it usually means it is not meant to be human
readable. So I suggest to use the CHAP_Script, in case you use WWW/LX.
This is the script to be used for the automatic negotiation protocols.

Andreas

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 08:00:32 -0500
Reply-To:     upaul@ntplx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Uncle Paul <upaul@NTPLX.NET>
Subject:      Re: MS-Works
Comments: To: d dv <ddvteach@JUNO.COM>
In-Reply-To:  <19991111.221358.-9387.2.ddvteach@juno.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Go to the following web site:

http://www.microsoft.com/technet/year2k/product/user_list.asp?PrintPageNumbe
r=1

There you should find that Works 2.0 is not listed. It is not listed on the
"yet to be tested pages either. So, according to Microsoft: "you can assume
it will NOT be tested for compliance."

Thanks,

Paul Anderson, President, Systems-Consulting
89 Main Street, Broad Brook CT 06016-9701
tel:(860)627-5393 fax:(860)627-5393
web: http://Systems-Consulting.com
Maximizing the results of Information Systems

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 07:18:35 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Re: Pocket references (esp quotations)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> But how comprehensive can it be if it fits on just one disk?
>
> Hopefully, mankind's had more meaningful things to say than that! <g>
>
> - Longden

Maybe it is compressed. :-)


Best Regards, Robert Hocking
In Sterling Heights, Michigan
Email Address: hocking@flash.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 08:29:58 -0500
Reply-To:     upaul@ntplx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Uncle Paul <upaul@NTPLX.NET>
Subject:      Re: Pocket references (esp quotations)
In-Reply-To:  <199911121318.HAA20829@chupacabras.flash.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Total Space for the Correct Quotes package from WordStar is:

536,349 bytes. This includes the directories listed

-WTL-|           63,821
     |-CQUOTES  472,528

This data is for Ver 2.23 - Feb 10, 1992



Thanks,

Paul Anderson, President, Systems-Consulting
89 Main Street, Broad Brook CT 06016-9701
tel:(860)627-5393 fax:(860)627-5393
web: http://Systems-Consulting.com
Maximizing the results of Information Systems

-----Original Message-----
From: HPLX Mailing List mailto:HPLX-L@UCONNVM.UCONN.EDUOn Behalf Of
Robert Hocking
Sent: Friday, November 12, 1999 8:19 AM
To: HPLX-L@UCONNVM.UCONN.EDU
Subject: Re: Pocket references (esp quotations)


> But how comprehensive can it be if it fits on just one disk?
>
> Hopefully, mankind's had more meaningful things to say than that! <g>
>
> - Longden

Maybe it is compressed. :-)


Best Regards, Robert Hocking
In Sterling Heights, Michigan
Email Address: hocking@flash.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 14:52:18 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: Arachne upgrade
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Matthew W. Sheffield wrote:

> He sent me the following question...
>
>> However, I have heard, that LX maybe has 4 shades of gray
>> in 640x200; is it true ?

This is not really true. I guess he refers to the nonstandard
4 grayscale mode which LXPIC supports. This mode is achieved
by setting up 640x200x2 CGA mode and then reprogrammning the
graphics controller to frame rate shading mode, which is
usually only supported by the 320x200x4 color modes.

In these modes, you gain two colors, but you loose 50% precision
in horizontal direction. This is, why fonts look really ugly
in this LXPIC mode, which is no problem if you only display
pictures, but will be a huge problem for mixed picture/text
display. Hence I cannot recommend it for a graphics browser.

To see what I mean, load a color (not b&w!) picture with LXPIC
on the palmtop. Then press 'W'. The picture is displayed at a
lower resolution with 4 grayscales. You may not notice the
lower resolution because of dithering. If you now press 'F'
to show the file info, the characters are almost unreadable,
because they are also dithered by the hardware.

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 06:21:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: Fluff: Re: 1.2 Gb Type II PC Card / Storage Options

>From: many@ manyisp
The decimal megabyte 1,000,000 (10 to the power 6) bytes
The CMOS binary megabyte 1,048,576 (2 to the power 20) bytes
FDISK partition in MB / Size Cluster Size in KB
0-127 / 2, 128-255      4, 256-511 / 8,
512-1023 / 16, 1024-2047 / 32
The 528MB barrier is BIOS
unless BIOS is updated or third party software is used
for computers built prior to 1996: 2.1 GB (4095 cylinders) limit
End.Of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 06:21:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: Using 200LX as WWW browser

>From: A Meshar <sponsor@FTEL.NET>
>Date: Wednesday, 10 November, 1999 06:52
>It has not AFAIK. HV has not changed in a long time,
>certainly not introduction of Java and/or Javascript support
>which is what many of the "(HV) user hostile" webpages
>contain.  HV simply does not support Java and Javascript.
Good thing it does not support java
I will not have to worry about "background" d/l of my DIR and Files
(although multitasking is nearly impossible if I use a 200LX) BIG <G>
or v!ruses or Tr0jan Hor$es or Meli$$a or Bubble B0y
However your key strokes may still / could be monitored "while on" a URL
>From: David Ball <dmb10@SWBELL.NET>
>Date: Wednesday, 10 November, 1999 08:31
>It surely sounds that WWW/LX allows me to do what I want to do with the
>200LX when I travel.  I'm going to have to probably make it part of my
>"upgrade Christmas present" to myself.  Thanks for this detailed
Do you really want to wait that long ? <g>
End.Of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:21:00 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: MS-Works
Comments: To: upaul@ntplx.net
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

Thanks, that answers the first question.   The second is, what happens
after Y2K, does works erase your flash card or something?   I ask because
I prefer version 2 over version 3, and if I can live with its problems,
I'll use it instead.

Domingo

On Fri, 12 Nov 1999 08:00:32 -0500 "Uncle Paul" <upaul@ntplx.net> writes:
> Go to the following web site:
>
>
http://www.microsoft.com/technet/year2k/product/user_list.asp?PrintPageNu
mbe
> r=1
>
> There you should find that Works 2.0 is not listed. It is not listed
> on the
> "yet to be tested pages either. So, according to Microsoft: "you can
> assume
> it will NOT be tested for compliance."
>
> Thanks,
>
> Paul Anderson, President, Systems-Consulting
> 89 Main Street, Broad Brook CT 06016-9701
> tel:(860)627-5393 fax:(860)627-5393
> web: http://Systems-Consulting.com
> Maximizing the results of Information Systems
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:32:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Novosad <Novosad@SERVER030.FWB.SAIC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Novosad <Novosad@SERVER030.FWB.SAIC.COM>
Subject:      Re: 1000cx software?
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

F. Kaufman
>Obviously, there are other ways but getting the first communications
>module on the HP will be necessary without a filer version.

If you have access to a DOS 6 or Win 95 machine you
should try INTERLNK.EXE and INTERSVR.EXE.

Jeff Johns
>The flash card route is the quickest way to get something on the 1000. If
>you don't have a desktop with a PC card slot, call a local computer store
>and see if they would be kind enough to let you just kinda borrow one of
>their demo display models for about five minutes to tranfer files to the
>flash card.

You could do the same with a laptop, which may be easier
to locate and borrow for five minutes.
You can then transfer the llra files to the Win machine
or any communication program to the 1000CX.  Or both.

Steve

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:56:22 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      HV fonts - missing characters
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri, 12 Nov 1999 09:43:12 -0500 (EST)

Hi Avi & gang -

A couple of days ago I posted a question about HV fonts and the
"typographers quotes" that aren't available.  Today Avi confirmed that
the missing characters are a font problem, not an HV problem.  So -- If
I edit my font sets with PFE, where should these missing characters be
inserted?  (There are several unused character codes in the fonts).


TIA

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:56:21 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: html editor for the hplx
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri, 12 Nov 1999 09:39:19 -0500 (EST)

10h58m17s ago ...
On Thu, 11 Nov 1999, Gary F. Carne wrote:

> Does anyone know of an html editor that will run on the HPLX?

I use VDE with a set of macros for HTML formatting.  I think there's
also a new collection of macros for PE on SUPER.


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:56:24 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: Log-in problem with new ISP
Comments: To: Andreas Garzotto <garzNOSPAM@IPROLINK.CH>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri, 12 Nov 1999 09:49:47 -0500 (EST)

01h57m31s ago ...
On Fri, 12 Nov 1999, Andreas Garzotto wrote:

> If you see "Garbage", it usually means it is not meant to be human
> readable. So I suggest to use the CHAP_Script, in case you use WWW/LX.
> This is the script to be used for the automatic negotiation protocols.

Isn't there another automated login script called M$CHAP created by -
who else - the demon lords of Redmond?  Is there any way WWW/LX can log
in to an ISP that uses this?


Later

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:07:31 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, zimm4@JUNO.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Larry Zimmerman <zimm4@JUNO.COM>
Subject:      WP 5.1 Fonts

I'm using WP 5.1 on the 200lx and I realize I only have the courier font.
 I'd like Times New Roman as well but havn't found it on the disks.  Our
OpenVMS installation of 5.1 has a collection of about 25 default fonts.
Did these not come with the DOS version?

Anyone have a few fonts they can send me or point me to a place on the
Internet where they can be downloaded.  All I really need is Times New
Roman.

Larry Zimmerman

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:05:13 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, zimm4@JUNO.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Larry Zimmerman <zimm4@JUNO.COM>
Subject:      WorldTime-type Database

I was fiddling with the WorldTime app on the 200lx when I realized it has
the map feature.  It is, no doubt, old news to all that you can scroll
through your database and the cities are indiated on a world map by a
flashing cursor.

Is there anyway to recreate this effect on a different database?  For
example, could I use a PCX file of a building floorplan and link it with
a database; call up a file in the database and the cursor flashes on the
floorplan telling me where in the building the file is stored?

Seems to me this would be a nifty feature to play with if it is available
to me in custom databases.

Larry Zimmerman

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 08:59:26 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, zimm4@JUNO.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Larry Zimmerman <zimm4@JUNO.COM>
Subject:      Self-Healing Databases

I had my first experience with a corrupted database a few weeks ago.  My
phone book had added a blank entry.  Every time I scrolled down to the
blank entry and tried to delete it, I got a message saying something
like, "File Not Found".  The alphabetizing of entries after this blank
entry was also incorrect.

I wasn't able at the time to mess around with it so I just exported all
my data to a text file using smartclip.  I notice now, however, the blank
entry is gone and the list is correctly alphabetized.  The problem seems
to have disappeared.

Any ideas on what might have happened?  How did it correct itself?

Larry Zimmerman

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 15:26:48 -0000
Reply-To:     abmenezes@mail.telepac.pt
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
Subject:      Re: WorldTime-type Database
In-Reply-To:  <19991112.090820.4854.1.zimm4@juno.com>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

On 12 Nov 99, at 9:05, Larry Zimmerman wrote:

> Is there anyway to recreate this effect on a different database?  For
> example, could I use a PCX file of a building floorplan and link it
> with a database; call up a file in the database and the cursor flashes
> on the floorplan telling me where in the building the file is stored?
>

Yes, there is. Is called MAPPOT, it's a japanese program. If you
don't found it in SUPER, you'll find in the japanese vector site.

Regards

Antonio


---------------------------------------------------------
Antonio Queiroz Menezes M.Sc. (Econo)
Porto - Portugal
Cell Phone + 351 931 555590
Work + 351 2 9981532 (direct, from 9 a.m. to 6 p.m., local time)
abmenezes@mail.telepac.pt
AntonioMenezes@compuserve.com
aameneze@aip.mailpac.pt  (work)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:57:33 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      Re: WP 5.1 Fonts
In-Reply-To:  <19991112.090820.4854.2.zimm4@juno.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 12 Nov 1999, Larry Zimmerman wrote:

> Anyone have a few fonts they can send me or point me to a place on the
> Internet where they can be downloaded.  All I really need is Times New
> Roman.

If I remember correctly the way these things work, the available
fonts are a function of the printer driver you are using.  What
is your printer?  You may want to go back through your installation
disks and see if you can update the driver.  A few years back WP
made newer printer resource files available on their web site.
I don't know if they're still available.

The only other option I know of is something like soft fonts.
Trust me, you don't want to mess with this.  I doubt it would
even work on the 200LX.

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 10:00:08 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      Re: WorldTime-type Database
In-Reply-To:  <19991112.090820.4854.1.zimm4@juno.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 12 Nov 1999, Larry Zimmerman wrote:

> Is there anyway to recreate this effect on a different database?

Here's my somewhat related question.  Is there a way to use the
WorldTime database with another map?  Specifically, I would love
to be able to select a city in the US (thanks Curtis! :) and see
its location on a US map.

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 11:01:59 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

> > > How do you get into graphics mode with Word 5.5?
> > >
> > Easy:
> > You open View, then Preferences and down in Display mode chose
> > Graphics. From then you are in graphics mode
> >
> Not here, it says cannot change view mode.
>
Then your screen.vid file is probably the unconfigured default, or one
configured for a different machine.

Run the Word screen configuration program, (I believe it's named makevid.exe) to
create a new screen.vid, and you should be okay.

If  you don't have makevid.exe or can't get it to work right, let me know and I
can send you a copy of my screen.vid.

Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 17:02:28 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: WP 5.1 Fonts
Comments: To: zimm4@JUNO.COM
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> I'd like Times New Roman as well but havn't found it on the disks.  Our
>OpenVMS installation of 5.1 has a collection of about 25 default fonts.
>Did these not come with the DOS version?

No


>Anyone have a few fonts they can send me or point me to a place on the
>Internet where they can be downloaded.  All I really need is Times New
>Roman.

There is a good add-on called "Morefonts". It is not freeware. I don't
think,
that there is some WP-specific freeware available. Perhaps downloadable
fonts. If you use a Postscript-interpreter-software, you can use 36 fonts
with
a postscript driver as the apple laserwriter plus.

GhostScript e.g. is such an interpreter. I used GoScript a long time ago.
I think GhostScript is freeware.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 07:36:04 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: WorldTime-type Database
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Jim Gasbarro's World Travel program on SUPER uses the something like the world
time database to compute travel distances and display the waypoints (ie, from
and to destinations) as crosshairs on a map.  You can load various state or
country maps (which you have to create yourself) and use them in conjunction
with his program.

His program, and WorldTime, reference locations using latitude and longitude,
and this may be a bit cumbersome for something as small as a house.

What you're describing sounds more in the area of Computer Aided Design
databases, and I don't recall much traffic about anything that's been found to
work well on the LX, at least in regards to architecture (several members
have/use  mechanical design packages).  There may be some old CAD style house
layout programs that may work on the LX also (don't know any specifics tho).

Entering the data for the building database, as well as drawing the floorplan
layout would be a fair amount of work, even on a desktop.  For all the effort in
first building and then porting this data to the LX, I just wondered what
benefit there is besides "gee whiz" <g>.

- Longden





Larry Zimmerman <zimm4@JUNO.COM> on 11/12/99 07:05:13 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to zimm4@JUNO.COM

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  WorldTime-type Database




I was fiddling with the WorldTime app on the 200lx when I realized it has
the map feature.  It is, no doubt, old news to all that you can scroll
through your database and the cities are indiated on a world map by a
flashing cursor.

Is there anyway to recreate this effect on a different database?  For
example, could I use a PCX file of a building floorplan and link it with
a database; call up a file in the database and the cursor flashes on the
floorplan telling me where in the building the file is stored?

Seems to me this would be a nifty feature to play with if it is available
to me in custom databases.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 07:39:51 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Self-Healing Databases
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

I'd check the database using Curtis' DBCHECK, on SUPER.

HP database apps go thru a "garbage collection" process occasionally to flush
out old records and pointers, so the problem may have just moved to another
area, or may be "in remission".

- Longden





Larry Zimmerman <zimm4@JUNO.COM> on 11/12/99 06:59:26 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to zimm4@JUNO.COM

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Self-Healing Databases




I had my first experience with a corrupted database a few weeks ago.  My
phone book had added a blank entry.  Every time I scrolled down to the
blank entry and tried to delete it, I got a message saying something
like, "File Not Found".  The alphabetizing of entries after this blank
entry was also incorrect.

I wasn't able at the time to mess around with it so I just exported all
my data to a text file using smartclip.  I notice now, however, the blank
entry is gone and the list is correctly alphabetized.  The problem seems
to have disappeared.

Any ideas on what might have happened?  How did it correct itself?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 11 Nov 1999 22:13:11 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Donald Collins <dcollins@MCSWEB1.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Donald Collins <dcollins@MCSWEB1.COM>
Subject:      Re: WDBLoad program to enter cities into World Time
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I'm interested.  I think notes would be important as would be WDBDump.  I'm
working on a knowledge database (history, facts & figures...) and this would be
very handy.

Don.

>Does anyone care about this besides me? If so, is it important/useful
>to also import notes? And I don't have a WDBDump - is this important?
>
>--
>Curtis Cameron
>WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 16:19:34 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: 1000cx software?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

There's also the pssibility to do the following:

(You need a desktop PC with interlnk / intersvr that's distributed with
DOS version 6.xx - don't know if it's also distributed with older and
newer versions)

1. connect HP and PC with the connectivity cable
2. Turn on both computers
3. start interlnk on the PC with the switch that auto-transfers itself
to the connected PC (read interlnk docs)
4. use interlnk / intersvr to do further file transfers

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 10:45:52 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      PE Question...
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----_=_NextPart_001_01BF2D2D.61ABC10C"

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01BF2D2D.61ABC10C
Content-Type: text/plain;
        charset="iso-8859-1"

Hi List,

I've looked through the docs and can't seem to find this...
Is there a keystroke I can use from PE to take me to the Task view in
PIM without having to be on a +t line? Sometimes my last +t line is a
few pages from where I am, and it's annoying to have to roll up and find
one before I can see my todo list.

TIA,
Steve

------_=_NextPart_001_01BF2D2D.61ABC10C
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12">
<TITLE>PE Question...</TITLE>
</HEAD>
<BODY>

<P><FONT FACE=3D"Arial">Hi List,</FONT>
</P>

<P><FONT FACE=3D"Arial">I've looked through the docs and can't seem to =
find this...&nbsp; </FONT>
<BR><FONT FACE=3D"Arial">Is there a keystroke I can use from PE to take =
me to the Task view in PIM without having to be on a +t line? Sometimes =
my last +t line is a few pages from where I am, and it's annoying to =
have to roll up and find one before I can see my todo list.</FONT></P>

<P><FONT FACE=3D"Arial">TIA,</FONT>
<BR><FONT FACE=3D"Arial">Steve </FONT>
</P>

</BODY>
</HTML>
------_=_NextPart_001_01BF2D2D.61ABC10C--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 00:49:49 +0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jorgen Wallgren <jorgen@PALMTOP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jorgen Wallgren <jorgen@PALMTOP.NET>
Subject:      Morphy one SW- and DOOM.
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Do you suppose you could run Doom on this thing? That would be kewl. =
<g>
>
> Steve

Hi there!

To run it directly without modifications- I don't know. But since Doom
for Win CE is actually running so good on a HP Jornada 680 that the
speed is as good as it is on a desktop PC- I am sure that a knowledgable
person could modify the source code (that suppose to be avaliable for
Linux- I guess). I am also sure that it could be done for HP 200LX-
since I have seen several old 3D DOS games which runs great on the 200LX
(such as In The Eye Of The Beholder, Grand Prix...).

If Win CE can do it, so can 200LX!!! :)


Jorgen

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 08:54:59 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: 1000cx software?
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Yes, I failed to mention interlnk on an earlier note.  Thanks Daniel, and Steve.

Funny, interlnk/intersvr were my primary means of connectivity for a long time.
I think I only gave up on it when my workplace set me up with a PC that I
couldn't modify the boot to load interlnk.  Intersvr on the PC was still
possible, but a major pain.

But for a plain and simple connect between the LX and a DOS PC,
interlnk/intersvr could hardly be simpler, since one unit becomes a file server
whose disk drives just show up on the "client" machine as additional drives
(same as laplink, but easier and done in pure DOS).

If your desktop PC is an NT, Win98 or Win95 machine there may be added problems
using either laplink or interlnk.

Lots of connection possibilities whose choice may vary depending on your
resources at hand.

- Longden





Daniel Hertrich <d.hertrich@GMX.DE> on 11/12/99 08:19:34 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Daniel Hertrich <d.hertrich@GMX.DE>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: 1000cx software?




Hi friends,

There's also the pssibility to do the following:

(You need a desktop PC with interlnk / intersvr that's distributed with
DOS version 6.xx - don't know if it's also distributed with older and
newer versions)

1. connect HP and PC with the connectivity cable
2. Turn on both computers
3. start interlnk on the PC with the switch that auto-transfers itself
to the connected PC (read interlnk docs)
4. use interlnk / intersvr to do further file transfers

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 11:00:16 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
Subject:      Re: html editor for the hplx (Off Topic)
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

A great Win 32 HTML editor I use is Allaire's Homesite 4.0. It's super
customizable and has wizards for all the latest HTML, CSS, and JavaScript
functions. Unfortunately it's $99.00 retail. www.allaire.com

__ms__

It's not what you're asking, but I advise to just write the HTML in
text, for which Memo would work fine. I write lots of HTML on a PC,
and I do it all on a regular text editor. Well, maybe not regular -
it's the best text editor I've ever seen by far, highly recommended
and available at www.notetab.com

--
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:15:42 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              neill <neill@KEYWAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         neill <neill@KEYWAY.NET>
Subject:      Re: ---cities/database
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>>>>>>Is there anyway to recreate this effect on a different database?  For
example, could I use a PCX file of a building floorplan and link it with
a database; call up a file in the database and the cursor flashes on the
floorplan telling me where in the building the file is stored?<<<<<<

If you read the PTP volume 7, number 1.........page 13 starts an article on
doing this in a general way.

Neill

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 02:22:16 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "KAZU(K.Tanabe)" <QWQ11433@NIFTY.NE.JP>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "KAZU(K.Tanabe)" <QWQ11433@NIFTY.NE.JP>
Subject:      Cpack works on the CGA.

Mike Wagstaff wrote.
> Unfortunately, I seem to recall the CPack requiring EGA as
> minimum, which won't work with the Morphy One's CGA display.
No! CPack can work on CGA.
I Installed CPack on the 1000CX.
Remove the line "CG.EXE" on APP200.BAT.
It is no need the CGA emulation on the CGA machine.

It works well. It just like a 200LX.
But Cpack isn't good solution for alternatives of the system manager,
because it can't do task-switching and the .EXM software can't work on it..

Bye.
--------------------------------------------
 Kazu (Kazuhisa Tanabe)
 Kyoto, Japan
 E-mail QWQ11433@nifty.ne.jp

 My 200LX is Double Speed and
             96MB(F:) upgrade with 2MB(C:).
 And I use Pretech 160MB ATA(A:) card.
--------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 09:21:58 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: WorldTime-type Database
Comments: To: Ted Heise <theise@NETINS.NET>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Ted, you may have already seen my earlier reply to Larry.

World Travel is your guy.  I have it set up with a US map as you described.  WT
gives not only a crosshair locator for cities, but also shows the distance
between two points (GreatCircle method).

- Longden





Ted Heise <theise@NETINS.NET> on 11/12/99 08:00:08 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Ted Heise <theise@NETINS.NET>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: WorldTime-type Database




On Fri, 12 Nov 1999, Larry Zimmerman wrote:

> Is there anyway to recreate this effect on a different database?

Here's my somewhat related question.  Is there a way to use the
WorldTime database with another map?  Specifically, I would love
to be able to select a city in the US (thanks Curtis! :) and see
its location on a US map.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 08:43:41 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Pocket references (esp quotations)
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Thanks for the many responses (on and off-list).

I may not have been clear about what I was after. I'm not really interested in
quotations organized by topic, for example to use in writing speeches where I'm
at a loss for an inspirational thought.

What I am after ... I often recall parts of speeches or literature, but can't
connect it with the author's name.  A Bartlett's (updated version) does a great
job for that.  Any such reference would have to be quite comprehensive ... more
so than a list of appropros quotations.

For example, I might want to look up who first said:

".....see things as they are and ask, 'Why?' I dream things as they never were
and ask, 'Why not?'"

So of course, if your quotation program/reference says "Robert F. Kennedy" ...
you should look for another reference.

Thanks again all.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 12:09:14 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "James P. Grenert" <grenert.james@MAYO.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "James P. Grenert" <grenert.james@MAYO.EDU>
Organization: Mayo Medical School
Subject:      Re: Re2: Morphy one SW
Comments: To: ian Butler <ian@hplx.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 11 Nov 1999, ian Butler wrote:
> Let's not forget that NewDeal would run quite well on a 486 (really, the
> only issue with it on the palmtop is speed).  And Win 3.1 running Calmira
> and some good older apps like WordPerfect 6.. unf.  I'm not sure if Calmira
> (or Win 3.1, for that matter) supports CGA or not, but..
>
I would say that a larger issue with all of these is the lack of a mouse.
I do use Excel and Word under Win3.1, but the GUI without a mouse is
pretty frustrating, and the keyboard mouse drivers are not worth the
trouble IMHO.

I still would run keyboard-centric software on the new machine.

J. P. Grenert
grenert@mayo.edu

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 13:14:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Striegel, Alan" <Striegel@PIOS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Striegel, Alan" <Striegel@PIOS.COM>
Subject:      Can anyone spare a hinge cap?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

I've been very fortunate to date that my 200LX has not developed the hinge
crack problem, but now the left side hinge end-cap has developed a crack
most of the way through it.  If you can send me one, please let me know
either through the list or directly via e-mail.

Alan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 17:54:33 -0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laurence Harvey <lharvey@CALLNETUK.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laurence Harvey <lharvey@CALLNETUK.COM>
Subject:      Re: 1000cx software?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I think you can use the Interlnk/Intersvr utility supplied with MS-DOS 6.xx
for this (and also available on the Windows 95 CD but not installed on your
hard drive). Use the MS-DOS help command to give you guidance but I think
you would need to connect the COM1 on your desktop to the COM1 on your
1000CX using a null modem connection (assuming you have a cable that fits
the 1000CX which could be another problem) then use the CTTY COM1 command on
your 1000CX to make it accept all commands from COM1 rather than the
keyboard. At the desktop, you enter INTERSVR /COM1 /RCOPY (or something like
that) which will cause the INTERSVR program to be transferred to the 1000CX.
Once that has finished you can run Interlnk on the Desktop (in CONFIG.SYS)
and Intersvr on the 1000CX and you will have a mapped drive on your desktop
which is your 1000CX. You can then copy anything you want to the 1000CX
using normal DOS commands.

All this is a very distant memory so is probably wrong in some areas but you
should get the idea. The MS-DOS help should give you the full details.

Cheers

Laurence

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 18:15:53 -0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laurence Harvey <lharvey@CALLNETUK.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laurence Harvey <lharvey@CALLNETUK.COM>
Subject:      Re: Log-in problem with new ISP
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Winfried

Using Dial-Up-Networking, right click on the connection for your new ISP and
select Properties. Select Configure  - Connection - Advanced and check the
Record Log File box. Dial in with your Desktop PC and make a connection.
This will create a log file called MODEMLOG.TXT in your Windows directory
which will give you all the activity that occurred during the connection.
This may help

Laurence

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 14:07:05 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, GJColeman@CSI.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         George Coleman <GJColeman@CSI.COM>
Subject:      Re: Elvis on the LX with WINSI.SYS
Comments: To: "Wittkamper, John" <jwittkamper@v-one.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> What is "Thompson Toolkit"?
>
> =09=09John :-)
>
>> Forgot to mention that this also works with Thompson Toolkit's
>> vi, which is based on Elvis.

Thompson Toolkit is a version of ksh (the UNIX Korn Shell) that
runs on Windows 95/NT, DOS, OS2, and I think Solaris.  It is
not free though.  Ref. http://www.teleport.com/~thompson
-George

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 13:09:42 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      OT: Laptop Touch Pads
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

I wanted to try my touch pad in a different mode on my Win98 laptop
computer.  What I wanted was to have it in absolute mode - i.e, the
touchpad extents match exactly those of the display.  To my surprise,
the driver I have seems to offer every conceivable customization of
the touchpad *except* for what I was looking for.

Does anyone know where I can get such a touchpad driver?

-Chris Lott

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 11:10:45 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Netscape Calendar inport
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I have not been able to get 4.7 to import the 200lx files
> correctly yet.
>
> I reach 2% then get an error message
>
> Module <HP100SPT.CPP>, Label: 780, Service error #0x13223
>
> Anyone know which version, if any, of Netscape Calendar
> inports correctly?

It worked for me with Netscape Pro 4.07

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 11:10:47 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: PE/PIM
Comments: To: bobv <bobv@SOS.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

bobv <bobv@SOS.NET> wrote:

> Andreas,

AFAIK he is no longer visiting here.

> After some time, I closed pe to do something else. On reopening, there
> was no information in one of the files (it didn't save)
>
> After a little figuring, I noticed that I had not counted the number of
> letters in the file name (it had 9 letters + extension).
>
> A nice addition would be to trim the first 8 letters and still save the
> file.

Already done. It chops off anything past the first 8. I just
tried it.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 14:19:42 -0500
Reply-To:     garyc@tir.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Gary F. Carne" <garyc@TIR.COM>
Subject:      Re: html editor for the hplx
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I could not find the PE macros mentioned below on SUPER.  Does anyone
know where they may be acquired?

Peniel Romanelli wrote:

> Fri, 12 Nov 1999 09:39:19 -0500 (EST)
>
> 10h58m17s ago ...
> On Thu, 11 Nov 1999, Gary F. Carne wrote:
>
> > Does anyone know of an html editor that will run on the HPLX?
>
> I use VDE with a set of macros for HTML formatting.  I think there's
> also a new collection of macros for PE on SUPER.
>
> HTH
>
> Peniel
> ------------
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 20:29:08 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: Bruce_Martin@MANULIFE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Bruce,

> Run the Word screen configuration program, (I believe it's named =
makevid.exe) to
> create a new screen.vid, and you should be okay.

I just did setup WORD on the desktop and cpoied it to the hp200lx. It
is working fine now.

I do have another problem. I can change the speller from Englisch to
German. Unfortunately I don't know, how to change the thesaurus.

Any idea?

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 14:36:06 -0500
Reply-To:     upaul@ntplx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Uncle Paul <upaul@NTPLX.NET>
Subject:      Re: MS-Works
Comments: To: d dv <ddvteach@JUNO.COM>
In-Reply-To:  <19991112.092316.-66157.0.ddvteach@juno.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I would suggest testing a little yourself.

Backup first!

Set your system date to 12/31/1999 23:59 and let it run through to 1/1/2000.
Run Works and play around saving, creating and retrieving files. Work in
spreadsheets and databases to see what's what.

Basically, Microsoft is saying that they won't be testing this product.



Thanks,

Paul Anderson, President, Systems-Consulting
89 Main Street, Broad Brook CT 06016-9701
tel:(860)627-5393 fax:(860)627-5393
web: http://Systems-Consulting.com
Maximizing the results of Information Systems

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 14:38:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

> I do have another problem. I can change the speller from Englisch to
> German. Unfortunately I don't know, how to change the thesaurus.
>
I don't know how to do this either, as I only have the English version of the
Thesaurus. Was there nothing about this in the Setup procedure?

As a last effort, maybe you could instead try re-naming the German thesaurus
from THES-DE.LEX (or whatever it is) to THES-AM.LEX.

Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 21:03:48 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              schittke@RZ.FH-AUGSBURG.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Prof. Dr. H.J. Schittke" <schittke@RZ.FH-AUGSBURG.DE>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
In-Reply-To:  <HPLX-L%99111113223369@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> > Easy:
> > You open View, then Preferences and down in Display mode chose
> > Graphics. From then you are in graphics mode
>
> Not here, it says cannot change view mode.
>

No further idea - I just checked again, it works: You chose Graphics
with the down array in the Display Mode line (but that is obvious).
After that you see underline, bold italic etc. directly.
It might be a question of the printer though (Words for Windows at
least has this depencency!). Do you have a printer installed? I
installed one very plain vanilla printer that has just Courier font,
nothing spectacular and it works!

Hang on   - hjs

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com>

iQA/AwUBOCxjfM/lHvGeiCpfEQJMiQCeImFOLh5qXamjhv9IIGvyUlF+dtsAn05j
tmNncKsOCoxygg9cSyT2z6nz
=jkQK
-----END PGP SIGNATURE-----

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 15:13:30 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Fluff: Metric system revisted (Crash!)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

There was a recent thread about how the (lack of) conversion between
english measurements and the metric system caused the loss of the Mars
Orbiter.  This url has details...

  http://cnn.com/TECH/space/9911/10/orbiter.03

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 21:35:15 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              schittke@RZ.FH-AUGSBURG.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Prof. Dr. H.J. Schittke" <schittke@RZ.FH-AUGSBURG.DE>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: Bruce_Martin@MANULIFE.COM
In-Reply-To:  <85256827.006BDA82.00@MLILHUB01@manulife.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> > I do have another problem. I can change the speller from Englisch
> > to German. Unfortunately I don't know, how to change the
> > thesaurus.
> >
> I don't know how to do this either, as I only have the English
> version of the
> Thesaurus. Was there nothing about this in the Setup procedure?
>
> As a last effort, maybe you could instead try re-naming the
> German thesaurus
> from THES-DE.LEX (or whatever it is) to THES-AM.LEX.
>

No chance there. I already tried this (together with a lot of other
ideas). If I remember correctly it is not even clear where the
thesaurus is called, or, where the file information is stored. It
must be hardwired in one of the word overlay files, probably just
with the two-character-extension. So I decided to just go on living
without the thesaurus (or, better, the wrong one).
On second look it is not quite as bad as it seems. Thinking about
this user group you will probably more often be at loss for an
english expression than for a german one ;-)

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com>

iQA/AwUBOCxruc/lHvGeiCpfEQKVggCcDpodKGmvGEeLIIuh+WuSXeLNrqcAoOk/
y5iQSd9PW3vxpq2XgNQA6BRo
=cxbS
-----END PGP SIGNATURE-----

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 16:25:14 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Can anyone spare a hinge cap?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I've been very fortunate to date that my 200LX has not developed the hinge
> crack problem, but now the left side hinge end-cap has developed a crack
> most of the way through it.  If you can send me one, please let me know
> either through the list or directly via e-mail.

If you can me how to send you a hinge cap thru email we'll both be rich!

...otherwise, for about $20 you can get a collection of replacement
parts for the LX fron HP; it includes 2 each of all the little bits that
break or fall off like hinge caps, rubber feet, battery cover, etc.
I think the part number is in the FAQ.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 16:47:55 -0500
Reply-To:     upaul@ntplx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Uncle Paul <upaul@NTPLX.NET>
Subject:      Re: Pocket references (esp quotations)
Comments: To: Longden_Loo@CANDLE.COM
In-Reply-To:  <88256827.005D2EDC.00@n-smtpmta.candle.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Is George Bernard Shaw what you would want. If so, Correct Quotes finds this
first!



Thanks,

Paul Anderson, President, Systems-Consulting
89 Main Street, Broad Brook CT 06016-9701
tel:(860)627-5393 fax:(860)627-5393
web: http://Systems-Consulting.com
Maximizing the results of Information Systems

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 22:30:22 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: 1000cx software?
Comments: To: Longden_Loo@CANDLE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> So the suggestions others have made (using zip.com or copying via a borrowed
> flash-card and notebook computer) may be needed to help get you started, in the
> absence of any documentation on using llra that came with your 1000cx (our 200LX
> documentation only explains llra in terms of using it in conjunction with the
> EXMs I've already mentioned).


Yes, the ZIP.COM mentioned in my original note and here, is a file
transfer program.  It contains a module and instructions on how to
"replicate" itself across a proper serial HP cable without any other
software other than what is already in the HP and I believe, in the
HP1000cx.

It may use debug or mode which probably are on your machine.

Good luck

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 22:30:28 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: OT: Laptop Touch Pads
Comments: To: Chris Lott <rclott@MAIL.HIWAAY.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Does anyone know where I can get such a touchpad driver?

You know I don't mind off-topic questions and discussions as much as
some of our more time-constrained members (G) but maybe this would be a
good time to suggest we all make use of the OTHER "newsgroups" David has
created on his server.

general
hardware
software
vendors
programming ??
fireside
cyber

I would presume most of them are HP-centric but two are for other types
of discussions or FLUGG.  On HPHAND we use Fireside to address Omnibooks
and Win95 and friendly chitchat which is not always relevant to the
HP95/100/200.  The forum is used by many to tap the tribal knowledge of
well-learned folks on subjects other than the palmtops.  I think that
David intended his FIRESIDE to be such an open discussion group.

Just my two cents and observations.  Of course, for Fireside to work,
others have to frequent it to answer or chat.

Fred

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 23:37:06 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Unsubscribe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 10 Nov 1999 09:00:21 -0800, Lars Hedstroem <nxw988e@TNINET.SE> wrote:

> Hello
>
> My ISP closed my Internetconnection for 6 days so I was unable
> to unsubscribe automatically so to speak.

I think somebody else had a solution for this problem.


> When I finally could connect there was 376 email waiting,not
> so funny.

That is a problem. What you could do is to have "nomail" on the
emailaccount. That means that you do not recevie any mail to your
emailaddress, but you can post to the list.

Then you use the Hplx newsserver to download the messages. If the
problem with your isp happens again then you could (when you were
up and going again) choose one of these solutions:

1. Download all messages that you have missed. (in the first case 376
messages) Not very smart.

2. Download only headers from the newsserver. Then you can choose
the messages that are of interest. Maybe the smartest choice. This way
you don't miss any messages of real interest. Its some work to go
through in your case 376 headers..

3. Download only the last 50 or so messages from the server and mark
the rest read..

I download headers from the newsserver and choose the ones I
want..(many times all the messages are of interest :-)

I download headers from many other newsgroups and I also filter them.
This has reduced the time I spend reading messages because I only
download what interests me. Example:in the comp.palmtops newsgroup I
choose to not download anything about CE devices.

The messages that are left then are mostly Hplx related.

Hope that this was helpfull..

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 18:13:39 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Morphy one SW
Comments: To: fjkaufman@WORLDNET.ATT.NET
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Actually, the ideal solution would be to be able to re-use the HP's rom
> in the new unit in some fashion.

HP (and Lotus? and MS?) would never allow that; copyright infringement.
Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 00:50:20 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> > I don't know how to do this either, as I only have the English
> > version of the
> > Thesaurus. Was there nothing about this in the Setup procedure?
> >
> > As a last effort, maybe you could instead try re-naming the
> > German thesaurus
> > from THES-DE.LEX (or whatever it is) to THES-AM.LEX.
> >
>
> No chance there. I already tried this (together with a lot of other
> ideas). If I remember correctly it is not even clear where the
> thesaurus is called, or, where the file information is stored. It
> must be hardwired in one of the word overlay files, probably just
> with the two-character-extension. So I decided to just go on living
> without the thesaurus (or, better, the wrong one).
> On second look it is not quite as bad as it seems. Thinking about
> this user group you will probably more often be at loss for an
> english expression than for a german one ;-)

This is for sure here. By the way, this is another advantage of WP5.1+
to use it multilingual.

With WP 5.1+ on my hp200lx I am able to send faxes. How can this be
done with Word 5.5? Is there any fax printer available? Did I miss that
point during setup?

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 15:29:13 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: OT: Laptop Touch Pads
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>>
You know I don't mind off-topic questions and discussions as much as
some of our more time-constrained members (G) but maybe this would be a
good time to suggest we all make use of the OTHER "newsgroups" David has
created on his server.
<<

A very good suggestion. I'd just like to point out that I've not participated
because my workplace restricts newsgroup access.

And when I get home, the time I have allotted to me by "the boss" barely lets me
get the normal list mail read.

Just so there's an understanding that it's not an option for some of us, tho
probably a very good medium for off-topic items of interest (like Vegas).

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 18:04:01 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: Morphy one SW
In-Reply-To:  <HPLX-L%99111218133904@UCONNVM.UCONN.EDU> from "Russel Brooks" at
              Nov 12, 99 06:13:39 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> > Actually, the ideal solution would be to be able to re-use the HP's rom
> > in the new unit in some fashion.
>
> HP (and Lotus? and MS?) would never allow that; copyright infringement.

Certainly copying ROM code and re-selling it would violate copyrights.
But would actually *using* the ROM from one machine I have in another
violate them?  Even copying it into a different package ROM might not,
if I subsequently destroyed or shelved the original.  Seems like I've
heard of people performing similar shennanigans with older Atari and
Commodore systems, which have BASIC and OS in ROM.

-Chris


--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 19:15:04 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Re: Re2: Morphy one SW
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Let's not forget that NewDeal would run quite well on a 486 (really, =
the
> only issue with it on the palmtop is speed).

I've never tried NewDeal out, or seen it in action. Is it
good?

> And Win 3.1 running Calmira
> and some good older apps like WordPerfect 6.. unf.  I'm not sure if =
Calmira
> (or Win 3.1, for that matter) supports CGA or not, but..

I don't think Win 3.1 will run because I don't think that it
can work with a CGA display. Even if it could, I doubt that
many Win 3.1 apps would co-operate with CGA in any case. For
example, Calmira needs VGA.

I'm willing to bet, however, that should the Morphy One make
it over from Japan to the rest of the world (please don't
forget Europe!!!), Windows 3.0 will be a popular (if
controversial!) choice. It is definitely CGA compatible, and
even runs on the 100/200 LXs, albeit *very* slowly. The best
thing about it is the amount of apps that have been written
for it. The problem is that not all will work with CGA, and
then there's the issue of finding them...

For me - and I don't want to sound horribly negative about a
machine that is still only in its prototype stages - the
main limitation of the Morphy One as it stands is the CGA
display. I suppose that the major problem with making a VGA
display that small is not so much the actual technology
aspect, but the fact that you'd need to carry a magnifying
glass around with the machine! Still, there's always the
Morphy Two to look forward to... <g>

As far as replacing the 100/200 LX built-in apps, I'm not
that concerned. As Mack pointed out, you will still be able
to run the PAL apps, DOS has had its fair share of programs
written for it, and there are of course plenty of talented
palmtop programmers out there! :-) It just struck me as a
shame that the LX apps, which I consider to be excellent,
probably won't be available.

As a side note, I wonder what HP are making of the Microsoft
situation. There is a real prospect of them being brought
down to Earth with a hefty enough bump for the
already-struggling Windows CE to be seriously damaged,
possibly even abandoned or pensioned off to a future
"Nanosoft" offspring company. I wouldn't mind betting that
the Morphy One has a brighter future than the Journada
range.

 -Mike http://games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 16:17:01 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: WP 5.1 Fonts
Comments: To: zimm4@JUNO.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

You need to change your printer driver. You are using
"Standard Printer".

Larry Zimmerman wrote:
>
> I'm using WP 5.1 on the 200lx and I realize I only have the courier font.
>  I'd like Times New Roman as well but havn't found it on the disks.  Our
> OpenVMS installation of 5.1 has a collection of about 25 default fonts.
> Did these not come with the DOS version?
>
> Anyone have a few fonts they can send me or point me to a place on the
> Internet where they can be downloaded.  All I really need is Times New
> Roman.
>
> Larry Zimmerman
>
> ___________________________________________________________________
> Get the Internet just the way you want it.
> Free software, free e-mail, and free Internet access for a month!
> Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 16:17:21 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, bobv <bobv@SOS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         bobv <bobv@SOS.NET>
Subject:      Re: PE/PIM
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

>I've just created a new file in PE called a23456789.txt (i.e.
>9+3). I added some text and closed PE. It asked if I wanted to
>save the changes; I said yes. I now have a file called
>a2345678.txt which contains my added text.
>
>Did I do something different from you?
>
>Chris R.

Chris and Avi,
Thanks for the replies. I must have an old version (thoght I got the
most recent)
How do tell what version you are running?
Thanks
Bob

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 21:09:22 -1000
Reply-To:     Norbert_Giese@T-Online.de
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Norbert Giese <Norbert_Giese@T-ONLINE.DE>
Subject:      PNR - Corrupt articles index file entry

Hello,

I sometimes encounter this message after having edited
the INCOMING.JN file (unsubscribing or changing the
sequence of records).

It also seems to happen after unsubscribing a group and
having still some older articles in the News folder.

I know how to recreate them, however, I need to find the
cause of failure.

Any ideas?
Norbert

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 00:38:07 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@SNAFU.DE>
Subject:      Re: PE Question...
Comments: To: Steve Dowell <sdowell@HARRAHS.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Press Alt-L in PIM for list, and Alt-P for pending tasks. It's described
in PIM.DOC.

Paulo

> Steve Dowell wrote:
>
> Hi List,
>
> I've looked through the docs and can't seem to find this...
> Is there a keystroke I can use from PE to take me to the Task view in
> PIM without having to be on a +t line? Sometimes my last +t line is a
> few pages from where I am, and it's annoying to have to roll up and
> find one before I can see my todo list.
>
> TIA,
> Steve

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 19:38:32 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: PE Question...
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----_=_NextPart_001_01BF2D77.CB97C986"

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01BF2D77.CB97C986
Content-Type: text/plain

I know Alt-L works from _within_ PIM. But I'm talking about being in PE.

From _within_ PE you can put the cursor on a +t line and press
Crl-Enter. This will take you into PIM and show you the tasks.

My question was... is there a keystroke from _within_ PE that will take
me to the task list in PIM without having to be on a +t line?

Maybe I can create a macro that will search the document for a +t line,
place the curser there, and press Ctl-Enter.

Thanks,
Steve


> Press Alt-L in PIM for list, and Alt-P for pending tasks. It's
> described
> in PIM.DOC.
>
> Paulo
>

------_=_NextPart_001_01BF2D77.CB97C986
Content-Type: text/html
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12">
<TITLE>RE: PE Question...</TITLE>
</HEAD>
<BODY>

<P><FONT COLOR=3D"#0000FF" SIZE=3D2 FACE=3D"Arial">I know Alt-L works =
from _within_ PIM. But I'm talking about being in PE.</FONT>
</P>

<P><FONT COLOR=3D"#0000FF" SIZE=3D2 FACE=3D"Arial">From _within_ PE you =
can put the cursor on a +t line and press Crl-Enter. This will take you =
into PIM and show you the tasks.</FONT></P>

<P><FONT COLOR=3D"#0000FF" SIZE=3D2 FACE=3D"Arial">My question was... =
is there a keystroke from _within_ PE that will take me to the task =
list in PIM without having to be on a +t line?</FONT></P>

<P><FONT COLOR=3D"#0000FF" SIZE=3D2 FACE=3D"Arial">Maybe I can create a =
macro that will search the document for a +t line, place the curser =
there, and press Ctl-Enter.</FONT>
</P>

<P><FONT COLOR=3D"#0000FF" SIZE=3D2 FACE=3D"Arial">Thanks,</FONT>
<BR><FONT COLOR=3D"#0000FF" SIZE=3D2 FACE=3D"Arial">Steve</FONT>
</P>
<BR>
<UL>
<P><FONT SIZE=3D2 FACE=3D"Arial">Press Alt-L in PIM for list, and Alt-P =
for pending tasks. It's described</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">in PIM.DOC.</FONT>
</P>

<P><FONT SIZE=3D2 FACE=3D"Arial">Paulo</FONT>
</P>
</UL>
</BODY>
</HTML>
------_=_NextPart_001_01BF2D77.CB97C986--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 20:48:59 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              blue73 <blue73@TAMPABAY.RR.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         blue73 <blue73@TAMPABAY.RR.COM>
Subject:      200 lx questions
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

HI,
        I just picked up a 2 meg 200lx and I have a few questions.

1 If I type class notes on it how can a transfer it to Word 97 format?

2 Is it possible to keep up with a speaker when typing on the 200lx?

3 What modems can I use with the unit without problems

4 Anyone have any software like Intillisync or anything that might be useful
for sale?


Thanks for any help

Larry Botkins

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 19:43:49 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Organization: Orion Enterprises
Subject:      FS/FYI: Modems on eBay
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="------------A0107007E99A4B63AE23690A"

This is a multi-part message in MIME format.
--------------A0107007E99A4B63AE23690A
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Greetings, all;
I've listed several PCMCIA Fax/Modems for sale on eBay. I just wanna get
rid of 'em. Item #'s: 199479992 and 199500029.  Check 'em out. Thanks.
Regards,
Richard Smith
aka "Seronac" on eBay

--------------A0107007E99A4B63AE23690A
Content-Type: text/x-vcard; charset=us-ascii;
 name="rsmith.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Richard A. Smith / Patti Smith
Content-Disposition: attachment;
 filename="rsmith.vcf"

begin:vcard
n:Smith;Richard and Patti
x-mozilla-html:FALSE
org:Orion
adr:;;;;;;
version:2.1
email;internet:rsmith@enol.com
note;quoted-printable:aka, on eBay: seronac@auction.skytel.com=0D=0A*=0D=0A"Statistically, at least half of the people in the world are of below-average intelligence." * =0D=0A"If variety is the spice of life, then humor is the dessert." *
fn:Richard and Patti Smith
end:vcard

--------------A0107007E99A4B63AE23690A--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 22:04:09 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jim Sanders <jsanders@ERIE.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jim Sanders <jsanders@ERIE.NET>
Subject:      WP 5.1
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Any ideas where to get a copy of WP 5.1?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 19:50:30 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: html editor for the hplx
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri, 12 Nov 1999 21:56:15 -0500 (EST)

07h36m18s ago ...
On Fri, 12 Nov 1999, Gary F. Carne wrote:

> I could not find the PE macros mentioned below on SUPER.  Does anyone
> know where they may be acquired?

Oops -- you're right, looks like they're not there.  Maybe I heard
about the macro set on the list... Or maybe I hallucinated it  8->>


Later,

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 19:50:32 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: 200 lx questions
Comments: To: blue73 <blue73@TAMPABAY.RR.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri, 12 Nov 1999 22:00:52 -0500 (EST)

01h24m32s ago ...
On Fri, 12 Nov 1999, blue73 wrote:

> 1 If I type class notes on it how can a transfer it to Word 97 format?

Can't Word import plain ASCII files?  If so, then, no problem.  Just
use your choice of file transfer software to copy to your desktop or
laptop.

> 2 Is it possible to keep up with a speaker when typing on the 200lx?

Not for me, I'm gettin' slow in my old age  8-> ... YMMV

> 3 What modems can I use with the unit without problems

PC card modems that draw less than 150mA current.  Or try to find any
14.4 external pocket modem.

> 4 Anyone have any software like Intillisync or anything that might be =
useful
> for sale?

Check the SUPER site:
        http://www.palmtop.net/supernew.html
This has loads of freeware and shareware.  The URL above is for
recently uploaded stuff, but there's a link to a HUMONGOUS collection
of software.


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 19:40:53 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: Morphy one SW
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> I don't think Win 3.1 will run because I don't think that it
> can work with a CGA display.
Yes, the screen driver from Win 3.0 for CGA works well for
Win 3.1 Also there were several "Laptop" creen drivers
created for Windows 3.1


 Even if it could, I doubt that
> many Win 3.1 apps would co-operate with CGA in any case. For
Likely true. However I have a version DeScribe 3.0 which
will support CGA that I'd love to have on a palmtop.

> Windows 3.0 will be a popular (if
> controversial!) choice. It is definitely CGA compatible, and

how about OS/2 Warp 3.0 There are CGA drivers for it and it
would be a superb taskswitcher.



>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 20:37:40 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Meyer <bmeyer@UNION-TEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Meyer <bmeyer@UNION-TEL.COM>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: d dv <ddvteach@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I've got Works 2.0. I suggested to Daniel Hertrich that we make a "DOS
Classic" software CDROM. Don't know if he has done anything and I haven't had
time.

Bob

d dv wrote:

> On Wed, 10 Nov 1999 17:45:11 -0500 Bruce Martin
> <Bruce_Martin@MANULIFE.COM> writes:
> >
> > For that matter, even old MS-Works 2.0 shows bold, underline,  italic,
> > strikethrough, superscript and subscript in Graphic mode. I don't  know
> if Works
> > 2.0 is Y2K compliant, though.
> >
> > Does anybody know where I can get a copy of Works 3.0 or whatever  the
> last DOS
> > version was?
>
> Do you by any chance have the installation disks for version 2.0?
>
> Domingo
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
+--------------------+-----------------+
|Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
|bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
|Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
+--------------------+-----------------+
|   http://w3.union-tel.com/~bmeyer/   |
+--------------------------------------+

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 20:45:12 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Meyer <bmeyer@UNION-TEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Meyer <bmeyer@UNION-TEL.COM>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I think video mode 7 (monochrome) does regular, bold, underline and blinking
characters or something like that.

I could be wrong, but Word 5.5 probably does monospaced (80 columns) characters
with some graphic enhancements thrown, no font size changes. I could be wrong.

There was a MS Word version 6 for DOS that included True Type fonts. Don't know
what the mininum display is for such but had them on EGA one time on my 8MHz
IBM AT. Kinda slow.

Bob

"Matthew W. Sheffield" wrote:

> *  A few years ago, I remember using WP on a monochrome screen that had all
> that underline stuff. I know that you can enable WP on an EGA or higher
> screen to display _one_ font in the WYSISOWYG style but I distinctly
> remember WYSISOWYG on a monochrome. Can anyone else recall ever having seen
> this or am I just deluded?

--
+--------------------+-----------------+
|Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
|bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
|Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
+--------------------+-----------------+
|   http://w3.union-tel.com/~bmeyer/   |
+--------------------------------------+

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 20:55:43 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Meyer <bmeyer@UNION-TEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Meyer <bmeyer@UNION-TEL.COM>
Subject:      Re: 1.2 Gb Type II PC Card
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Don't forget, computer math is not the same as regular math, that is


1KB = 1024 (1K)
1MB = 10242 (1M)
1GB = 10243 (1G)

This difference allows the buyer to talk in terms of computer math and hard
drive manufactures forgetting that computer math existed use regular folks
math to inflate their figures.

1.000000000 GB to me means 1.073741824 gigabits to the hard drive
manufactures.

Bob

David Sargeant wrote:

> On Wed, 10 Nov 1999, ENOINC - John S. Hope wrote:
>
> > RE: CF size.  I know by experience that Simple inflates their CF sizes
> > as a marketing ploy.  For example, the 128MB CF from Simple is really
> > 110MB.  The Simple CFs are called 90% IDE drives (their words, not
> > mine).  Formatting, MBR, etc take up space but not 14% of the drive.
> > This has been verified with Simple.
>
> Uh, my 40MB Simple Tech card was well over 40,000,000 bytes in size.
> Unless you are saying they just started doing this with CF cards.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
+--------------------+-----------------+
|Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
|bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
|Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
+--------------------+-----------------+
|   http://w3.union-tel.com/~bmeyer/   |
+--------------------------------------+

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 23:17:22 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      IRC/LX?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I noticed that IRC/LX is now being advertised on the D&A web page where =
you
can order it, but with such a vague description I would be hard pressed =
to
gamble $25 on a product which may or may not meet my requirements.
Avi/Andreas, can you please tell what the "large" command set is? Does it =
do
any or all of the following:

DCC Chat
DCC Send & Receive
Queries
Can you be in more than one channel at a time
I assume it does IDENTD due to the new version of www.exe

Is there any possibility of a demo like there is POST/LX?

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 23:52:09 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      IRC/LX.... got my answers
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Oops, sorry, didn't see the link to download IRC/LX... I'm reading the =
docs
now...

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 12 Nov 1999 23:50:01 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      Outlook / HPLX Converter Version 2.15 available
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

The newest version of the Outlook / HPLX file converter is available.
Differences include:

* Fixed problems with Outlook 97 when converting contacts.

* Allow sub-folders of Outlook's Calendar and Tasks folders to be
selected to receive LX data.

* Improved how recurring items are stored into Outlook. Exceptions to
regularly scheduled items are now handled correctly.

* Allow LX ToDo's to be converted to Outlook tasks. You can turn on
and off Appointments/Events conversion and ToDo conversion separately.
Note that LX ToDo's are not marked as complete when they're imported.

The are available from:

http://cameron.hplx.net
http://members.aol.com/freewhL44/lxgames.html


--=20
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 09:29:14 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: html editor for the hplx (Off Topic)
Comments: To: "Matthew W. Sheffield" <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

How about all the unused crap it produces in the HTML code?
Looks like MS Frontpage, doesn't it? (the crap).

-goe-

-----Original Message-----
From: Matthew W. Sheffield <mws722s@MAIL.SMSU.EDU>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Freitag, 12. November 1999 18:03
Subject: Re: html editor for the hplx (Off Topic)


>A great Win 32 HTML editor I use is Allaire's Homesite 4.0. It's super
>customizable and has wizards for all the latest HTML, CSS, and JavaScript
>functions. Unfortunately it's $99.00 retail. www.allaire.com
>
>__ms__
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 09:49:54 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Unsubscribe
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>> My ISP closed my Internetconnection for 6 days so I was unable
>> to unsubscribe automatically so to speak.
>
>That is a problem. What you could do is to have "nomail" on the
>emailaccount.

Or change your ISP

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 09:52:57 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Re2: Morphy one SW
Comments: To: Mike Wagstaff <aj93@DIAL.PIPEX.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

<I don't think Win 3.1 will run because I don't think that it
can work with a CGA display.>

It can.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 09:54:32 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: WP 5.1
Comments: To: Jim Sanders <jsanders@ERIE.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

<Any ideas where to get a copy of WP 5.1?>

It is not freeware. You have to buy it.
As an alternative, there was WordPerfect Works
including LetterPerfect (WP lite) and SpreadSheet
(PlanPerfect lite).

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 01:12:19 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: we still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Dr. Werner Furlan wrote:
>
> hello Stefan and company,
>
> Am 11 Nov 99, um  17:15, schrieb Stefan Peichl ueber
> "Re: We still need help":
>
> > I used 100 ohm and the noise went away completely.
> > Not one single error! Is this good or bad news?
> > Indeed this resistor also disables receiving data through
> > the IR port.
>
> you make a short circuit with this resistor. It shows that the input
> of the noise is through the IR-line.

Good!  The thing we NOW know pretty certainly, is that ALL the noise
induced, is stopped by this resistor - I would be unhappy if not so.  I
did expect it to mess up the reception through the IR port (Of course,
you'd also have to have the receiving photodiode attached, to receive IR
from anything else <G>)

> > This kind of test I can do easily, because I soldered 3 wires
> > (to both photo diode legs and GND) and led them out through the
> > (empty) backup battery case. I soldered a plug at the open ends and
> > can now easily just plug in capacitors or resistors or ...
> >
> thats the problem I mentioned before... you MUST NOT have long
> wires if you want to block HF from your receiver circuit. Your
> capacitors will not work with long legs...

BUT, the 100 ohm resistor is ending the noise problem, despite those
long leads.  So, the circuitry attached to that LED is the ONLY cause of
this problem.  That's GOOD news, if we'd still had a problem, it'd be a
real problem, this should simplify things.  I'd suspect that when I
trace from there, this info will really help me <G>

Stefan, Is the photo diode you're removed, the smaller 'black' one, or
the larger 'clear' one there?  (If it's the smaller 'black' one, I think
I see what to fix to probably SOLVE this, need to get some measurements
& make sure.  If it's the smaller 'T1' diode, unsolder, fit a ferrite
bead, re-solder, perhaps adding a capacitor, and we should see an
improvement <G>  Glad I suggested that resistor test.  If it's the
larger diode, need to figure another way.)

> best regards,
>
> Werner

  Mark

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 01:30:22 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: 1.2 Gb Type II PC Card
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

It's worse than that.  They do love curve balls here...

Sometimes 1 Meg = 1024 * 1024;
Sometimes 1 Meg = 1000 * 1024; and
Sometimes 1 Meg = 1000 * 1000.

Always assume that, if it's a HDD size, it's one of the last two,
usually.  You'll usually get THAT one right <G>  (As the number they can
tell you is then larger.)

  Mark

Bob Meyer wrote:
>
> Don't forget, computer math is not the same as regular math, that is
>
> 1KB = 1024 (1K)
> 1MB = 10242 (1M)
> 1GB = 10243 (1G)
>
> This difference allows the buyer to talk in terms of computer math and hard
> drive manufactures forgetting that computer math existed use regular folks
> math to inflate their figures.
>
> 1.000000000 GB to me means 1.073741824 gigabits to the hard drive
> manufactures.
>
> Bob
>
> David Sargeant wrote:
>
> > On Wed, 10 Nov 1999, ENOINC - John S. Hope wrote:
> >
> > > RE: CF size.  I know by experience that Simple inflates their CF sizes
> > > as a marketing ploy.  For example, the 128MB CF from Simple is really
> > > 110MB.  The Simple CFs are called 90% IDE drives (their words, not
> > > mine).  Formatting, MBR, etc take up space but not 14% of the drive.
> > > This has been verified with Simple.
> >
> > Uh, my 40MB Simple Tech card was well over 40,000,000 bytes in size.
> > Unless you are saying they just started doing this with CF cards.
> >
> > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
> --
> +--------------------+-----------------+
> |Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
> |bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
> |Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
> +--------------------+-----------------+
> |   http://w3.union-tel.com/~bmeyer/   |
> +--------------------------------------+
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 05:35:15 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Unsubscribe + WorldWar3
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Martin in Narvik wrote:

"2. Download only headers"


But this solution doesn't work on the mailinglist?
I can't just pick mail 156 and download that,can I?


In another email you wrote:


"But you Swedes had a double role during the war. Neutral but still=
 making a
profit..but lets not go into any discussion about this I know wayto=
 little about this.."

I know we made a profit on Germany and Hitler,but it was the same ww1.=
 To get a better economy we now in sweden hope that Germany will start=
 a ww3.:-)You know first money then moral:-))

" I think that German troops were
transported on swedish railways during ww2"

Yes,and  also to Norway and I am sure that's why you mentioned it,isn't=
 it?BTW are you still angry because of this?

"But we are all friends now :-)) "

Yes,but we could have been even better friends if you hadn't
destroyed our union 1905:-)

Lars Hedstrom/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 22:06:46 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, david.eggins@USA.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Eggins <david.eggins@USA.NET>
Subject:      PCMCIA Floppy disk
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hello everyone

I have just purchased a Sony TRV900 MiniDV camera.  This camera has a
PCMCIA card slot, and a external PCMCIA Floppy disk.

My question is:  Is there any hope at all that I would be able to use
this floppy disk with the palmtop?  I know that there is a driver on
the web to use this with a laptop, but it is for windows 95.

Anyone got any info?


Thank you for your help.

David Eggins

PS  This camera is EXCELENT!  Video camera and still camera in one.  I
have a 48mb CF with adaptor, and can copy pics to the web using the
palmtop while away!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 13:25:10 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paal Rasmussen <paal@AH.TELIA.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paal Rasmussen <paal@AH.TELIA.NO>
Subject:      Re: Palmtop Circuit user report 2 of 2
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

If you enter say a long tailed pair transistor circuit, does it calculate
distortion?
Does it do DC analysis - temperature drift and so on?
What transistor models does it use?
Can you define your own components?
Are export/import functions present to/from SPICE or ORCAD or other
industry standard progs?

- Paal

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 06:38:44 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      Re: WP 5.1
In-Reply-To:  <199911130304.WAA16024@moose.erie.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 12 Nov 1999, Jim Sanders wrote:

> Any ideas where to get a copy of WP 5.1?

You might try eBay.

   http://www.ebay.com

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 14:01:31 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: Re2: Morphy one SW
In-Reply-To:  <HPLX-L%99111219150418@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 12 Nov 1999, Mike Wagstaff wrote:

...
> I'm willing to bet, however, that should the Morphy One make
> it over from Japan to the rest of the world (please don't
> forget Europe!!!), Windows 3.0 will be a popular (if
> controversial!) choice. It is definitely CGA compatible, and
> even runs on the 100/200 LXs, albeit *very* slowly. The best
> thing about it is the amount of apps that have been written
> for it. The problem is that not all will work with CGA, and
> then there's the issue of finding them...

Yes, but what is the Y2K status on Windows 3.0? Microsoft don't even have
it in their Y2K database...

Someone mentioned OS/2 Warp, which sounds reasonable to me :-)

> For me - and I don't want to sound horribly negative about a
> machine that is still only in its prototype stages - the
> main limitation of the Morphy One as it stands is the CGA
> display. I suppose that the major problem with making a VGA
> display that small is not so much the actual technology
> aspect, but the fact that you'd need to carry a magnifying
> glass around with the machine! Still, there's always the
> Morphy Two to look forward to... <g>

As David mentioned, the ELAN chip comes with a CGA controller built-in,
making it an obvious choice. There are also newer ELAN chips available
(up to 133 MHz), I wonder what graphics controller they have built-in.


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 14:03:42 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      OT: WP51 graphics driver?
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Hi all,

I know this is off topic, but there are many WP51 users on the list...

It's impossible to find WP51 graphics drivers for (all?) newer graphics
cards. It used to be standard for graphics cards to come with such a
driver, but alas no more (sniff...)

So, does anyone know if there is a VESA graphics driver for WP51? VESA is
available on pretty much all newer cards. Running 640x480 in 16 colours
just seems a bit pointless on an 8MB graphics card with an 17" monitor :-)


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 08:43:48 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, GWilson241@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Gordon H. Wilson" <GWilson241@AOL.COM>
Subject:      Re: Pocket references (esp quotations)
Comments: To: david@hplx.net
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

I would like to obtain a copy. Perhaps you could upload it to SUPER

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 15:36:48 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              schittke@RZ.FH-AUGSBURG.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Prof. Dr. H.J. Schittke" <schittke@RZ.FH-AUGSBURG.DE>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
In-Reply-To:  <HPLX-L%99111218501601@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> This is for sure here. By the way, this is another advantage of
> WP5.1+ to use it multilingual.
>
Indeed? The version I have is also just plain english. I have not
found any German spelling, hyphenating and/or thesaurus abilities.
Sure enough there is an all-German version of WP5.1 but the same
holds true for Word (it's just not free - neither is WP!)

> With WP 5.1+ on my hp200lx I am able to send faxes. How can this be
> done with Word 5.5? Is there any fax printer available? Did I miss
> that point during setup?
You did not miss it - it is not there. On the other hand I did not
install it on WP5.1 either, because none of my fax devices was
recognized by the installation program.
There are other options not available on Word, especially mathematic
editoring, also desktop publishing features are better on WP. On the
other hand the somewhat peculiar user interaction of WP lends for a
very slow learning curve for novices.
bye   - hjs

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com>

iQA/AwUBOC1lgc/lHvGeiCpfEQKYqwCfZ1eujQgCQhHukLzv6zBtmwdXiwgAn3hz
da8CrZtZHsWWuMz5PjaXrry/
=HpGA
-----END PGP SIGNATURE-----

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 15:36:50 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              schittke@RZ.FH-AUGSBURG.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Prof. Dr. H.J. Schittke" <schittke@RZ.FH-AUGSBURG.DE>
Subject:      Re: WP 5.1
Comments: To: Jim Sanders <jsanders@ERIE.NET>
In-Reply-To:  <199911130304.WAA16024@moose.erie.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> Any ideas where to get a copy of WP 5.1?
> Try http://www.recycledsoftware.com
They still have several WP 5.1 packages.
bye     - hjs

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com>

iQA/AwUBOC1m9c/lHvGeiCpfEQIQDgCfUnPJnq4zHw10PQwOpu/PTNeHtp8AoLV9
RHcLhvvyIlcUHeAeZGJts8qz
=f+rL
-----END PGP SIGNATURE-----

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 15:36:52 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              schittke@RZ.FH-AUGSBURG.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Prof. Dr. H.J. Schittke" <schittke@RZ.FH-AUGSBURG.DE>
Subject:      Re: Unsubscribe + WorldWar3
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
In-Reply-To:  <HPLX-L%99111305351500@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> To get a better economy we now in sweden hope that Germany
> will start a ww3.:-)You know first money then moral:-))
>
Though I do hope that you were just kidding there are some things on
earth that should be excepted from that.
Or, to quote our foreign minister (when he was just new to the
parliament) to somebody just like you:
"Mit Verlaub, Sie sind ein Arschloch!"
I hope this flame will stop this horribly discussion before going any
further.
hjs

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com>

iQA/AwUBOC1pM8/lHvGeiCpfEQI3+gCfdxbokxO64t+U84asgMimaGKoz8EAnjpL
Ofm4XOvV5F3aoG8iTjS2/u0B
=berZ
-----END PGP SIGNATURE-----

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 09:52:17 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              lloo@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <lloo@WORLDNET.ATT.NET>
Subject:      Re: Pocket references (esp quotations)
Comments: To: upaul@ntplx.net

Message-Id: <19991113145213.URRH23762@12.72.227.171>
Date: Sat, 13 Nov 1999 14:52:13 +0000

On 1999-11-12 upaul@ntplx.net said to lloo@worldnet.att.net
   >Is George Bernard Shaw what you would want. If so, Correct Quotes
   >finds this first!

Yes.  Sounds like good stuff.

Now the harder question ... is this software still available anywhere?

Thanks.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 10:29:32 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Brian.McIlvaine@UNBOUNDED.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Subject:      Upgrade question
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Will the 1MB HP 200LX's take an 8 or 32 MB upgrade? I have been waiting for a
32Mb for Thaddeus, but as Hal has pointed out, they are having difficulty
getting used units. I was wondering if the 1MB versions can be upgraded?

Brian

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 10:37:33 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: WP 5.1
Comments: To: Ted Heise <theise@NETINS.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sat, 13 Nov 1999 10:18:02 -0500 (EST)

How about http://www.recycledsoftware.com ?

02h39m18s ago ...
On Sat, 13 Nov 1999, Ted Heise wrote:

> On Fri, 12 Nov 1999, Jim Sanders wrote:
>
> > Any ideas where to get a copy of WP 5.1?
>
> You might try eBay.
>
>    http://www.ebay.com


*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 10:37:35 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: html editor for the hplx
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sat, 13 Nov 1999 10:31:22 -0500 (EST)

The PE HTMLmacros are available on Mike Koggins's HPLX server

http://www.technoir.nu:8080

Cheers...AJKind

14h40m52s ago ...
On Fri, 12 Nov 1999, Peniel Romanelli wrote:

> Fri, 12 Nov 1999 21:56:15 -0500 (EST)
>
> 07h36m18s ago ...
> On Fri, 12 Nov 1999, Gary F. Carne wrote:
>
> > I could not find the PE macros mentioned below on SUPER.  Does anyone
> > know where they may be acquired?
>
> Oops -- you're right, looks like they're not there.  Maybe I heard
> about the macro set on the list... Or maybe I hallucinated it  8->>
>
> Later,
>
> Peniel
> ------------
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 10:05:59 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: Outlook / HPLX Converter Version 2.15 available
In-Reply-To:  <bvosODXA91wNqiMpc168O1KPdA8b@4ax.com> from "Curtis Cameron" at
              Nov 12, 99 11:50:01 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Curtis:

As I only recently had a need for this excellent program, I haven't
been folowing very closely the early threads about it.  Forgive if
this is a obvious question... what's the history behind the appointment
book transfers.  I note that I can xfer HP->Outlook, but not the other
way.  Is this just something you plan to get around to someday, or is
there a fundamental reason it isn't included - maybe some incompatability
with this direction of transfer?

Thanks for all your help and effort writing this program.

-Chris Lott

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 08:27:21 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              smoore <smoore@EFFECTNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         smoore <smoore@EFFECTNET.COM>
Subject:      PCMCIA 20 Meg Disks Available!
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I  have (9) 20 Meg PCMCIA Flash Disks ATA Type II available. They are
in excellent condition. They have only been used a  very few times on
testing a couple new prototype products at work. I sell (1) 20 Meg
PCMCIA disk for $35.00 plus $5.00 shipping and I sell (2) disks for
$65.00 plus $5.00 shipping. I accept Money Orders Only! and you can send

payment to my address at:

Scott Moore
20455 S.W. Kirkwood Street
Beaverton, Or 97006

I will email you back  the day I receive your payment and let you know
that your disks our on the way. I always send out next day unless I
receive your payment on a Saturday and then I will send them out on
Monday. Please email me and let me if you are interested and when you
are sending payment so I can hold your disks for you. The response has
been tremendous and the people I have worked with on this group have
been great.  Thanks alot!   Scott

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 11:40:15 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              schittke@RZ.FH-AUGSBURG.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Unsubscribe + WorldWar3
Comments: To: schittke@RZ.FH-AUGSBURG.DE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Schittke Wrote:

>
Though I do hope that you were just kidding there are some
things onearth that should be excepted from that.


I am really sorry that you took offence,it wasn't my meaning
to harm anyone,It was an answer on Martin in Norway who said that we=
 in sweden played a doublerole during ww2,played neutral but made a=
 lot of many by exporting iron ore and much more to Germany.Otherwise=
 I would never had mentioned something like that here.I also just had=
 red an article about the present secretary of the French Academy who=
 has just written a book named:The German Danger, this perhaps influenced=
 my unconscious.
I hope you accept my apology.

Und ich bin nicht ein Arschloch!

Lars Hedstroem/Schweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 10:55:49 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: Upgrade question
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<< I was wondering if the 1MB versions can be upgraded?>>

No problem. It can be upgraded however you want it.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 09:17:14 -0800
Reply-To:     dcollins@trendx.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Donald Collins <dcollins@TRENDX.COM>
Subject:      Re: html editor for the hplx

Is anyone currently working on this?

Don.

Peniel Romanelli writes:
> Fri, 12 Nov 1999 21:56:15 -0500 (EST)
>
> Oops -- you're right, looks like they're not there.  Maybe I heard
> about the macro set on the list... Or maybe I hallucinated it  8->>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 10:51:52 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Kopplin <kopplin@TECHNOIR.NU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Kopplin <kopplin@TECHNOIR.NU>
Subject:      Re: html editor for the hplx
Comments: To: MCHEM1@UCONNVM.UCONN.EDU
In-Reply-To:  <HPLX-L%99111310373528@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

> The PE HTMLmacros are available on Mike Koggins's HPLX server
>
> http://www.technoir.nu:8080

I think that should be "Mike Kopplin's" <g>

And a more direct url would be
http://www.technoir.nu:8080/hplx/htmlmac.htm

Mike Kopplin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 11:13:04 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Kopplin <kopplin@TECHNOIR.NU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Kopplin <kopplin@TECHNOIR.NU>
Subject:      Re: html editor for the hplx
In-Reply-To:  <199910130917.PNR01421@trendx.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

If you're talking about the macros, I haven't made any changes for several
months. They serve my needs. Feel free to make any suggestions.

Mike Kopplin
http://www.technoir.nu:8080/hplx/htmlmac.htm


> Is anyone currently working on this?
>
> > Oops -- you're right, looks like they're not there.  Maybe I heard
> > about the macro set on the list... Or maybe I hallucinated it  8->>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 13:27:44 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      X-Finder r9 ??
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sat, 13 Nov 1999 13:23:50 -0500 (EST)

Hi X-Philes:

   I can't seem to open a .wk1 file unless it is in C:\dat\  is there a
   workaround?

   My current finder.env entry is:

.wk1    ,f      ,$m {xbc00}/fr%x{Enter}


aTdHvAaNnKcSe,

*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 02:37:09 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peter Maddern <pmad@DEVT.DEMON.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peter Maddern <pmad@DEVT.DEMON.CO.UK>
Subject:      Appointment Book / Todo structures (part 2)
MIME-Version: 1.0

In message , David Sargeant <david@HPLX.NET> writes
>Is there any way to modify the layout of the Appointment Book and Todo
>records?

Continuation of my previous mail...............

Method 2:-

1 TO DO TODAY
A Item 1 (A priority)
A Item 2 (A priority)
A0****************************************
B Item 1 (B priority)
B Item 2 (B priority)
B0****************************************
C Item 1 (C priority)
C Item 2 (C priority)
D*****************************************
D*****************************************
D*****************************************
D*****************************************
D*****************************************
D*****************************************
(repeat these lines until the final master to do line is well separated
on the screen from today's to do list so in the main view, your mind is
just focussing on today's to do items)
E MASTER TO DO LIST
F*****************************************
G1 ADMINISTRATION
G2 BUDGET
H1 CAR
H2 DIY
I1 MISCELLANEOUS
I2 PERSONAL
J1 PROJECT SPENDING
J2 SATURN PROJECT
K1 TRAVEL
K2 VENUS PROJECT etc etc

Each of these items G1, G2 etc. have individual to do's within them.

Again, I tailor a macro to change priority in the "to do today list" and
to pull items out of the notes in the above "MASTER TO DO" items into to
do today or to send items back if today's to do becomes overloaded.

Dr Peter Maddern
Technical Manager
North Wales and Surrey, UK.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 02:36:56 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peter Maddern <pmad@DEVT.DEMON.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peter Maddern <pmad@DEVT.DEMON.CO.UK>
Subject:      Appointment Book / Todo structures (part 1)
MIME-Version: 1.0

In message , David Sargeant <david@HPLX.NET> writes
>Is there any way to modify the layout of the Appointment Book and Todo
>records?

This mail comes in 3 parts.....the whole mail was too long for the list

"To do list" management is a VERY important issue for me. I have a
complex job with lots of projects to manage, tasks to do. Like you, I
think that ideally, the built - in LX to do list should have categories
(like in MS Outlook) but it doesn't. I have given a LOT of thought on
using the LX to help me manage my large list of things to do. I have
used 3 methods:-

Method 1:-

1 TO DO TODAY
A Item 1 (A priority)
A Item 2 (A priority)
A0****************************************
B Item 1 (B priority)
B Item 2 (B priority)
B0****************************************
C Item 1 (C priority)
C Item 2 (C priority)
D*****************************************
D*****************************************
D*****************************************
D*****************************************
D*****************************************
D*****************************************
(repeat these lines until the final master to do line is well separated
on the screen from today's to do list so in the main view, your mind is
just focussing on today's to do items)
E MASTER TO DO LIST

"Master to do" has all your master to do items (your master list of
everything you want to do in your life, not just today) in a NOTE with
project headings in upper case in alphabetic order). I use a macro to
change priority in the "to do today list" and to pull items out of the
note in the "E MASTER TO DO" into to do today or to send items back if
today's to do becomes overloaded.

Dr Peter Maddern
Technical Manager
North Wales and Surrey, UK.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 02:37:45 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peter Maddern <pmad@DEVT.DEMON.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peter Maddern <pmad@DEVT.DEMON.CO.UK>
Subject:      Appointment Book / Todo structures (part 3)
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain;charset=iso-8859-1

In message , David Sargeant <david@HPLX.NET> writes
>Is there any way to modify the layout of the Appointment Book and Todo
>records?

This is the continuation of my previous mail.....................

Method 3 (the one I've finally settled):-

This in the appointment book:-

1 TO DO TODAY
A Item 1 (A priority)
A Item 2 (A priority)
A0****************************************
B Item 1 (B priority)
B Item 2 (B priority)
B0****************************************
C Item 1 (C priority)
C Item 2 (C priority)

This in "memo" on the LX. Below is an example:-

ADMINISTRATION (each heading in bold and underline)
  Sort out storage in office
  Check invoices cleared

BUDGET
  Do year 2000 budget
(note) Need to get list of next year's objectives approved

CAR
  Arrange car service

DIY
MISCELLANEOUS
PERSONAL
PROJECT SPENDING
SATURN PROJECT
TRAVEL
VENUS PROJECT etc etc

I use "Ctrl - G to insert a bullet point to make the actual to do item
stand out from it's accompanying note (like in "BUDGET" above).

A macro works great for sending items to and fro as before. The macro
for moving items from memo (to do and note) to today's to do works like
this. You highlight all the text. It takes the text from memo into an
appointment book note, the top line of the note is then pulled into the
to do field. This gives a to today do item with its note.

To my mind, the benefits of the 3rd method are as follows:-

You have a truly separate "to do today" and master list. I like to just
look in any one day what I have to do on that day. This way, your daily
to do list doesn't get drowned by a nearby list of master items.
You can search within memo but you can't search within individual notes
in appointment book.
No accidental chance of hitting f4 and deleting your entire master to do
list note in method 1. (You can get round this in method 1 by doing
regular "save as" backups of the note of course).
Faster loading and saving.
Headings stand out in memo with bold and underline.
You can add new to do headings (like categories) in memo on the fly. You
can do same in the note in method 1 but trying to add new headings to
the master to do list in method 2 I find a hassle.
Easy to print your master list of to do's from memo
etc. etc.

I use method 3 and I use Info Select from Micro Logic for random info
capture and retrieval from the myriad of e-mails, phone calls and faxes
I get.

I have toyed on and off with Lotus Agenda but never really stuck with
it. I'd like to explore PIM/PE when I get more time. Tried it once but
never got going with it.

I hope these methods stimulate some thought.

Peter

Dr Peter Maddern
Technical Manager
North Wales, UK.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 13:14:33 -0600
Reply-To:     Maynard Riley <maynard@interaccess.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Maynard Riley <maynard@INTERACCESS.COM>
Subject:      Re: Appointment Book / Todo structures (part 1)
Comments: To: Peter Maddern <pmad@DEVT.DEMON.CO.UK>
In-Reply-To:  <NsCJnvAI7ML4EwjA@devt.demon.co.uk>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

On Sat, 13 Nov 1999 02:36:56 +0000, Peter Maddern wrote:

>I have given a LOT of thought on
>using the LX to help me manage my large list of things to do.

I use the Notes app; it has categories, subsets, sorts, ....
don't need dates that I can't key into the text field.

for your consideration,

        `~Maynard

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 11:40:18 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      HTML tags for PE (was Re: html editor for the hplx)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Fri, 12 Nov 1999 14:19:42 -0500, "Gary F. Carne" <garyc@tir.com> =
wrote:

> I could not find the PE macros mentioned below on SUPER.  Does anyone
> know where they may be acquired?

Hi All,

PE macros for HTML tags can be found at:
http://www.technoir.nu:8080/hplx/htmlmac.htm

This is a good one, so add it to your "HPLX-Tips" database",
I use FFDB for mine. (:-)



Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 12:37:23 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: X-Finder r9 ??
Comments: To: MCHEM1@UCONNVM.UCONN.EDU
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sat, 13 Nov 1999 14:46:57 -0500 (EST)

01h19m14s ago ...
On Sat, 13 Nov 1999, Al Kind wrote:

> Sat, 13 Nov 1999 13:23:50 -0500 (EST)
>
>    I can't seem to open a .wk1 file unless it is in C:\dat\  is there a
>    workaround?
>
>    My current finder.env entry is:
>
> .wk1    ,f      ,$m {xbc00}/fr%x{Enter}

Hi Al -

Try this:

.wk1    ,f  ,$m {xbc00}/fr%x{Enter}
        ,t  ,$m {xbc00}/fr{Esc}{Esc}%p%c{Enter}

The first one is the one you use now.  It only opens .wk1 files in the
123 default directory.  The other one will open 'em anywhere.  One
"gotcha" is that you'll need kbuf128.sys to expand the keyboard buffer
to use it.  I should probably use only the second line and change the
,t to ,f   I think kbuf128.sys comes with KeyStuff.   BTW this opens
the file with ShiftEnter


Later

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 12:10:36 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: X-Finder r9 ??
Comments: To: MCHEM1@UCONNVM.UCONN.EDU
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Sat, 13 Nov 1999 13:27:44 -0500, Al Kind <MCHEM1@UCONNVM.UCONN.EDU> =
wrote:

> Sat, 13 Nov 1999 13:23:50 -0500 (EST)
>
> Hi X-Philes:
>
>    I can't seem to open a .wk1 file unless it is in C:\dat\  is there a
>    workaround?
>
>    My current finder.env entry is:
>
> .wk1    ,f      ,$m {xbc00}/fr%x{Enter}


Hey Big Al & All,

Will here is what I found in my X-Finder Tips & Tricks database as
stated by the Master himself ( Peniel 07/15/99 ) :

o How to open WK1 worksheets from any directory besides the Lotus default.
It didn't work before, but with kbuf128, it works fine.


Here's the line:
.wk1    ,t  ,$m {xbc00}/fr{Esc}{Esc}%p%c{Enter}

With this you can highlight the WK1 and hit ShiftEnter and it'll
open in 123.

If you prefer to use Enter, add the below instead of the one above:
.wk1    ,t  ,$m {xbc00}/fr{Esc}{Esc}%p%c{Enter}

Note the change of "t" after the fist comma to an "f".


Note also that kbuf128 is needed to make this work.





Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 13:44:40 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: X-Finder r9 ??
In-Reply-To:  <199911131737.MAA12457@moon.web2000.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 13 Nov 1999, Peniel Romanelli wrote:

> The first one is the one you use now.  It only opens .wk1 files in the
> 123 default directory.  The other one will open 'em anywhere.  One
> "gotcha" is that you'll need kbuf128.sys to expand the keyboard buffer
> to use it.  I should probably use only the second line and change the
> ,t to ,f I think kbuf128.sys comes with KeyStuff.  BTW this opens the
> file with ShiftEnter

Assuming you have a double-speed palmtop, the latest version of Mack's
speed driver does include a 64-key keyboard buffer expander, which
eliminates the need for kbuf128.sys and should free up some memory for
those with double-speed machines who already load both spd31 and
kbuf128.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 16:55:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: X-Finder r9 ??
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sat, 13 Nov 1999 16:47:28 -0500 (EST)

Is that the 2/19/99 (2339byte) version? I don't see mention of it in
SPD31.DOC

Or is there a newer revision?

02m48s ago ...
On Sat, 13 Nov 1999, David Sargeant wrote:

> Assuming you have a double-speed palmtop, the latest version of Mack's
> speed driver does include a 64-key keyboard buffer expander, which
> eliminates the need for kbuf128.sys and should free up some memory for
> those with double-speed machines who already load both spd31 and
> kbuf128.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 14:48:40 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: X-Finder r9 ??
In-Reply-To:  <HPLX-L%99111316554950@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 13 Nov 1999, Al Kind wrote:

> Is that the 2/19/99 (2339byte) version? I don't see mention of it in
> SPD31.DOC

It's a newer one.  Probably hasn't been released yet.  <oops>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 18:34:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: PE Question...
Comments: To: Steve Dowell <sdowell@HARRAHS.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Is there a keystroke I can use from PE to take me to the Task view in
> PIM without having to be on a +t line?

Just press CTRL-Enter on any empty line and you will go into PIM.  Then =
press
ALT-L ALT-P to get pending tasks.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 18:34:30 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: html editor for the hplx
Comments: To: Peniel Romanelli <peniel@WEB2000.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Oops -- you're right, looks like they're not there.  Maybe I heard
> about the macro set on the list... Or maybe I hallucinated it  8->>

There is a collection of HTML editing items for Quick/LX.  You could use =
this
with PE to easily add various HTML tags, ut you have to buy Quick/LX =
first <g>.
 I think Quick/LX is well worth the money.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 23:46:59 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Unsubscribe + WorldWar3
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Lars Hedstroem wrote:

> Martin in Narvik wrote:
>
> "2. Download only headers"
>
> But this solution doesn't work on the mailinglist?
> I can't just pick mail 156 and download that,can I?
>

Well I do not know what emailprogram you use and what the isp you are using supports. But I have no problem with just downloading headers on emailboxes and in newsgroups/list.hplx.

I am using Post/lx and it works very nice. I use the hplx newsserver to download only headers and then choose the messages I want.. I can also download headers in my emailboxes. Nice when I
know that there are big emails in the boxes and I have either limited bandwith or time.

>
> In another email you wrote:
>
> "But you Swedes had a double role during the war. Neutral but still making a
> profit..but lets not go into any discussion about this I know wayto little about this.."
>

If you see the last line...it says that I know way to little about this and I am sorry to say that it is of no interest for me to discuss this matter further..I have no hard feelings
towards Swedes at all..:-))

My replies about this topic will end here..sorry

--
Martin Bergvill Narvik, Norway
-.."This --> {  } is probably the best button to press."
(From The Hitchhikers Guide to the Galaxy)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 13:39:56 +1300
Reply-To:     Warwick.G@xtra.co.nz
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Warwick Gowland <Warwick.G@XTRA.CO.NZ>
Subject:      Survey Data for HP200LX
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hey,
Just joined the "club". I'm new to these machines, but real keen to
learn all about them.
Land Surveyor by trade and hear these HP's (200LX) are useful in the
trade. I have a HP48GX and to keen to know about transferring info
between PC's, 200LX's and 48GX (also infra red).
Keen to hear from more from all you trigonometric types.

--
Warwick Gowland
58 Dallington Terrace
Christchurch 6
New Zealand

E-Mail : Warwick.G@xtra.co.nz

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 17:40:27 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Time Tracking...
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Steve Dowell <sdowell@HARRAHS.COM> wrote,

> Does anyone have suggestions for a DOS time tracking program (preferably
> free) that you know is Y2K compliant? Also, I'd really like to find one
> that has that 'timer' feature.

I am aware of what you wrote re recommendation. I would
recommend our software of course, but, hey, I am biased! :)

But I write to tell you TimeTracker/LX has a timer. It is an
undocumented feature, and it basically shows on the screen the
time in digital characters... :)

I'll send email separately to you to tell you how :-)

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 17:40:29 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Flash Cards and Win98
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Chris Lott <rclott@MAIL.HIWAAY.NET> wrote:

> Do any of you Win98 experts know about the error message that I get

The characterization "expert" excludes me instantly!

But: perhaps this has to do with some disk characterizations
you have setup for your disks in Win? There are screens that
let you set up various limits on disk space utilization, with
attendant warnings and actions required. I saw it twice when I
was working with someone else's Win98, and I also recall
similar things in Win95. Something perhaps about Agents?

Sorry I cannot be more vague :) but that's all I remember on
the topic. Hope it is of some help.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 17:40:49 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: HV fonts - missing characters
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Peniel Romanelli <peniel@WEB2000.NET> wrote:

> A couple of days ago I posted a question about HV fonts and the
> "typographers quotes" that aren't available.  Today Avi confirmed that
> the missing characters are a font problem, not an HV problem.  So -- If
> I edit my font sets with PFE, where should these missing characters be
> inserted?  (There are several unused character codes in the fonts).

Good question. Check and see what is the ASCII value of the
&nbsp; for example, and insert a desired character in that
slot using PFE. As you correctly observed, this is a font
question, not HV. I can help with HV a bit, but not much with
PFE, sorry, I have problems using it myself :-) ....

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 17:40:54 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Log-in problem with new ISP
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Peniel Romanelli <peniel@WEB2000.NET> wrote:

> > If you see "Garbage", it usually means it is not meant to be human
> > readable. So I suggest to use the CHAP_Script, in case you use WWW/LX.
> > This is the script to be used for the automatic negotiation protocols.
>
> Isn't there another automated login script called M$CHAP created by -
> who else - the demon lords of Redmond?  Is there any way WWW/LX can log
> in to an ISP that uses this?

CHAP is the protocol that has been around a looooong time,
longer than Microsoft's DUN. When MS updated their DUN and
Win95, they "invented" CHAP again, and called it MSCHAP. It is
nearly identical to CHAP. If you can login using
Win95/Win98/WinNt with no modifications, then you can use
CHAP_Script which has been in WWW/LX since 1996. We
encountered it first with AT&T,

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 17:40:24 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      IRC/LX Announcement
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

IRC/LX is now available for sale at D&A Webpage.

It supports many commands in its menus, but in addition it
knows the following:

   /admin
   /away
   /bye
   /ctcp
   /dcc
   /help
   /ignore
   /info
   /invite
   /ison
   /join
   /j
   /kick
   /leave
   /links
   /list
   /me
   /mode
   /motd
   /msg
   /m
   /say
   /names
   /nick
   /notice
   /n
   /oper
   /part
   /ping
   /query
   /quit
   /quote
   /signoff
   /si
   /server
   /stats
   /time
   /trace
   /topic
   /userhost
   /version
   /who
   /whois
   /w
   /whowas
   /?
   /!

You can find the price on the Webpage. This product _requires_
a license for WWW/LX Plus. The order form at
http://www.dasoft.com/orderfrm.html is available to order this
product.

When you order, please provide your current WWW/LX Plus
information (UserName and REGID). You should have received it
from us or your dealer. (If you received it from someone else
:) - you may wish to consider ending your life of crime as a
software pirate! :- ....)

Oh, yes, the copy you can download from the Webpage will work
for sometime as a demo, but it is limited in the number of
lines it will accept before it stops functioning. So you can
demo it to your heart's delight.

Thank you.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 17:40:34 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Time Tracking...
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Steve Dowell <sdowell@HARRAHS.COM> wrote:

> I also tried out the Timetracker/LX demo. The thing I didn't like about
> it was that if you stopped one task to work on an other, and then came
> back to the first, you have to re-enter another line for the first task
> again. Yuck. (Unless I'm misunderstanding it...certainly a possibility).
> With TimeStax you can simply hit a key to stop the timer on the first
> task, and start it on the second. Then stop it on the second task and go
> back and continue timing on the first again. Smooth. No extra entries.
> I think I understand why TT/LX does this. Some people want to know what
> time they started on each task. For me that's not important. I just need
> to accumulate a daily total for each task.

I think you can go back to the original line and update its
termination time. But it uses two out of three parameters to
calculate the third: Start time, end time, duration. So if you
enter start and end times, it calculates duration from those
two. If you return to the prev. entry and update the end time,
then you can get a heck of a lot more billed time :) ,but it
is not exactly honest to do.

There is also a way to override durations by adding a string
like this "##2:30" (w/o the quotes) in the Memo field. This
will use the duration specified, regardless of the duration
indicated by the start/end times. Not as comfortable perhaps
as other products, but it is there. (Check out the docs for
TT/LX).

Oh, BTW, TimeTracker/LX is Y2K compliant to the extent that
the paltop is, we use the date from the palmtop.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 17:40:58 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: PE/PIM
Comments: To: bobv <bobv@SOS.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

bobv <bobv@SOS.NET> wrote:

> How do tell what version you are running?

In PE, Menu Help About.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 17:40:37 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Thanks to Andreas
Comments: To: Paulo Custodio <Paulo.Custodio@SNAFU.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Paulo,

since Andreas is not hanging out here AFAIK, I took the
liberty to forward t him your message.

Thank you.

  Avi M. D&A
  http://www.dasoft.com

> I would like to give a public Thank You to Andreas Garzotto and the
> support he gives to his software (PE/PIM).
>
> I got one bug fix (TAB character) and one new feature (ISO dates) in one
> week, and this for a free software!
>
> Just a happy customer.
> Paulo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 17:41:06 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: IRC/LX.... got my answers
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Jeff Johns <jeffj@SCOTT.NET> wrote,

> Oops, sorry, didn't see the link to download IRC/LX... I'm reading the
> doc now...

Oops, I now see you got to the docs indeed. How do you like
it so far?

BTW, I did not give you a complete answer in my other post:

> DCC Chat
> DCC Send & Receive
> Queries
> Can you be in more than one channel at a time

These are all in IRC/LX.

> I assume it does IDENTD due to the new version of www.exe

IDENTD really has nothing to do with IRC, as you observe, it
is part of WWW.EXE. This was added into WWW.EXE quite a long
time ago, waaaay before IRC/LX.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 17:41:03 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: IRC/LX?
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Jeff Johns <jeffj@SCOTT.NET> wrote:

> I noticed that IRC/LX is now being advertised on the D&A web
> page where you can order it, but with such a vague
> description I would be hard pressed to gamble $25 on a
> product which may or may not meet my requirements.
> Avi/Andreas, can you please tell what the "large" command set
> is? Does it do any or all of the following:

Well, I must assume you did not see my announcement yet (since
I did not post it yet - going up in this run :) ...) and I
also assume you did not look at the docs accompanying IRC/LX.

I put in links (now three) to excellent resources on the 'net
for IRC - they do much better work at it than I ever hope to
be able to.

The product works just fine even without registration, but
it'll cut you off after some number of lines displayed.

> Is there any possibility of a demo like there is POST/LX?

Yes, there is that possibility :-) ...

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 17:40:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Log-in problem with new ISP
Comments: To: Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES> wrote:

> trying to connect to a new ISP, my modem dials allright and
> CONNECT 14400/REL-LAMP V42. BIS appears on the screen. After
> that: garbage letters and eventual disconnect from the ISP
> side.

I think you should try to use CHAP script if you do not
already use it. The garbage characters are probably packets
for login. Almost 95% (maybe more) of ISPs worldwide use CHAP
as the login protocol.

The Windows default, built-in login protocol is CHAP (actually
a Microsoft version of it, MSCHAP), and that makes life for
ISPs easier - they need to know even less than they knew
before, hence the spotty support :) ...

The CHAP script built into WWW/LX Plus CFG file should not be
modified. If you modified it, send email to D&A Support, they
will send back to you a good copy. You can also restore the
script by renaming WWW.CFG to WWWOLD.CFG, then run
WWWSETUP.EXE, make one fake setup and then save it all. In the
resulting WWW.CFG you will find an original CHAP Script, which
you can clip out, and paste into WWWOLD.CFG. Then delete
WWW.CFG, and rename WWWOLD.CFG back to WWW.CFG.

Do not expect anything intelligible in the script prompting,
it is all done via packets with binary data, not anything
legible like "Please Enter your UserID:".

You can also write directly to D&A Support if this does not
help.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 23:08:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: 200 lx questions
Comments: To: blue73 <blue73@TAMPABAY.RR.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> 2 Is it possible to keep up with a speaker when typing on the 200lx?

Practice your typing with TYPER105.ZIP from the SUPER site.
It turns LX typing practice into a speed game.

> 3 What modems can I use with the unit without problems

From the serial port almost any external modem.  I connect to a
USRobotics 14.4 Sportster and also a USR Courier V.Everything. I've also
got a 14.4 PCMCIA modem somewhere but I seem to have lost it among all
my clutter.  :-)

> 4 Anyone have any software like Intillisync or anything that might be useful
> for sale?

I mainly use the CPACK software for my transfer needs.  There is also
the ZIP212.ZIP serial transfer utility on SUPER.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 20:30:50 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, bobv <bobv@SOS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         bobv <bobv@SOS.NET>
Subject:      Re: PE/PIM
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Thanks Avi

I have ver 2.2c 3 Sept 99.

I checked your site and the most recent ver is 2.1.

What version are you running?

Thanks
Bob

bobv <bobv@SOS.NET> wrote:

> How do tell what version you are running?

In PE, Menu Help About.

  Avi

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 22:43:27 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      Re: Outlook / HPLX Converter Version 2.15 available
Comments: To: Chris Lott <rclott@MAIL.HIWAAY.NET>
In-Reply-To:  <199911131605.KAA27229@mail.HiWAAY.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

Chris Lott wrote:
>what's the history behind the appointment
>book transfers.  I note that I can xfer HP->Outlook, but not the other
>way.  Is this just something you plan to get around to someday, or is
>there a fundamental reason it isn't included - maybe some =
incompatability
>with this direction of transfer?

I would like to do it (appointments from Outlook to the LX), but it's
more difficult than the other conversions that OL2LX does. Mack
Baggette has modified the GDBIO DOS programs, making them into a DLL
to get data into and out of an LX PDB/GDB file. He also adapted some
other code into it to convert into and out of ADB files, but this part
is not finished yet.

=46or one, right now ToDo items in the LX are not indicated as having
been completed when data is exported, so that's why Outlook will show
imported Tasks as un-checked. This is a small fix I'm sure.

But the big challenge IMHO will be creating a working ADB file. If
you've followed any threads about corrupted files, you might have
picked up on the fact that ADB files have the most corruption
problems, because the items in a file are all linked together in
complex ways. Anything goes wrong and you'll see "Record Not Found".

So I've asked Mack to make some changes in the DLL, but he's a busy
man too. And I expect that figuring out how to correctly write an ADB
file will take some time.

--=20
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 00:29:59 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              schittke@RZ.FH-AUGSBURG.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Unsubscribe + WorldWar3
Comments: To: schittke@RZ.FH-AUGSBURG.DE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Schittke wrote:

>
Though I do hope that you were just kidding there are some
things on
earth that should be excepted from that.
Or, to quote our foreign minister (when he was just new to
theparliament) to somebody just like you:
"Mit Verlaub, Sie sind ein Arschloch!"
"

I forgot to mention that "First money then moral" was a travesty on=
 "First food then moral".I suppose you as a German know who said these=
 words.

The arschloch quote you refer to,if I recall right,is not of our days?


Lars Hedstrom/Schweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 22:52:57 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: PE/PIM
Comments: To: bobv <bobv@SOS.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Thanks Avi
>
> I have ver 2.2c 3 Sept 99.
>
> I checked your site and the most recent ver is 2.1.
>
> What version are you running?

2.2 19Jun99

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 09:02:05 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      Re: Log-in problem with new ISP
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Laurence,

thank you for your very good advice, that would have come
handy in the case that there had been a login dialogue. In the
meantime, I learned through Andreas and Stuart that my ISP
starts an AUTOMATIC connection dialogue immediately after
dialing and that those ininteligible letters are not meant for
humans to read. Their suggestions to login with the CHAP
script works perfectly.
Thank you !

>Winfried
>
>Using Dial-Up-Networking, right click on the connection for your new ISP =
and
>select Properties. Select Configure  - Connection - Advanced and check =
the
>Record Log File box. Dial in with your Desktop PC and make a connection.
>This will create a log file called MODEMLOG.TXT in your Windows directory
>which will give you all the activity that occurred during the connection.
>This may help
>
>Laurence

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 19:09:55 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, david.eggins@USA.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Eggins <david.eggins@USA.NET>
Subject:      WWWLX - Delete messages as they are downloaded
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hello everyone

Hopefully Avi, Andreas or someone can help me here, and I thaught the
answer might help someone else.

I use postLX to download mail.  I have set it to delete messages as
they are downloaded.  This worked on the email server I used to use.
Unfortunately this server is no longer available.  The other two email
servers I have access to have a minor problem.

The delete command for each email is only applied on the server when
the very last email is downloaded.  This means that if the palmtop
times out during downloading my 300 a day emails, I get all of the
already downloaded messages again!

The funny thing here is that this does not affect MS Outlook.
It does not read them again. Is there any setting I have overlooked to
fix this.  Sometimes I have to race off in the middle of downloading
emails, and this was not a problem before, I could disconnect, and
start from where I was again on the next online run.

Thank You
David Eggins

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 05:06:16 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill ! <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Unsubscribe + WorldWar3
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Martin wrote:

"I am using Post/lx and it works very nice. I use the hplx
newsserver to download only headers and then choose the
messages I want.. I can also download headers in my emailboxes.
Nice when I
know that there are big emails in the boxes and I have either
limited bandwith or time."


I have Post/lx myself but I have never tried to filter emails

or only download headers as I haven't had any need of

 that,that is to say until I signed up to this mailinglist.

I guess I'll have to take a look in my manuals,but there is one

thing I don't understand.You said you can only download headers

in your emailboxes,but the emails you don't download do you

leave them on the server of your ISP?


Concerning ww2,I agree that we stop that discussion,I just

answered your own comments about sweden during this period.



BTW,did you find the Nokia with a fold up screen?


Lars Hedstroem/Sweden









i




>
> In another email you wrote:
>
> "But you Swedes had a double role during the war. Neutral but
still making a
> profit..but lets not go into any discussion about this I know
wayto little about this.."
>

If you see the last line...it says that I know way to little
about this and I am sorry to say that it is of no interest for
me to discuss this matter further..I have no hard feelings
towards Swedes at all..:-))

My replies about this topic will end here..sorry

--
Martin Bergvill Narvik, Norway
-.."This --> {  } is probably the best button to press."
(From The Hitchhikers Guide to the Galaxy)

** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 04:54:10 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Arvidas Bajercius <arvidas@NETSCAPE.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Arvidas Bajercius <arvidas@NETSCAPE.NET>
Subject:      Re: Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: Bruce_Martin@MANULIFE.COM
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

Bruce Martin <Bruce_Martin@MANULIFE.COM> wrote:
> > > How do you get into graphics mode with Word 5.5?
> > >
Run the Word screen configuration program, (I believe it's named makevid.=
exe)
to
create a new screen.vid, and you should be okay.

If  you don't have makevid.exe or can't get it to work right, let me know=
 and
I
can send you a copy of my screen.vid.

I tried your suggestion on both the desktop & Lx, to no avail.

If you would be so kind and send me a copy of your screen.vid.

Thank you so much,

Harv



____________________________________________________________________
Get your own FREE, personal Netscape WebMail account today at http://webm=
ail.netscape.com.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 05:35:28 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      Re: WWWLX - Delete messages as they are downloaded
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sun, 14 Nov 1999 10:27:41 +0000 (GMT)

01h26m26s ago ...
On Sun, 14 Nov 1999 01:01:15 -0800 (PST), David Eggins wrote:

> The delete command for each email is only applied on the server when
> the very last email is downloaded.  This means that if the palmtop
> times out during downloading my 300 a day emails, I get all of the
> already downloaded messages again!

All I can suggest is if your server times out and a second run starts
re-downloading full messages, save time by interrupting the run and
changing to header download.

If your server times out regularly, well, I would try and fix that.

> The funny thing here is that this does not affect MS Outlook.

Does the server not time out for Outlook? Or if it does, how does
Outlook tell you the messages are still on the server?

Tony

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 07:30:48 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: HV fonts - missing characters
Comments: To: A Meshar <sponsor@FTEL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sun, 14 Nov 1999 09:25:29 -0500 (EST)

12h44m40s ago ...
On Sat, 13 Nov 1999, A Meshar wrote:

> Good question. Check and see what is the ASCII value of the
> &nbsp; for example, and insert a desired character in that
> slot using PFE. As you correctly observed, this is a font
> question, not HV. I can help with HV a bit, but not much with
> PFE, sorry, I have problems using it myself :-) ....

Hi Avi -

Hmmm - there seems to be one problem with that.  The web uses the ISO
Latin 1 character set, and the .hfn fonts seem to use codepage 850
Multilingual (Latin I).  The codes above 127 are different, and I guess
HV translates the Latin 1 codes into CP850 codes to use the fonts.
Looking in my 200LX manual, I see that the palmtop's CP850 doesn't have
the "typographer's quotes" at all...  Strangely, EVP (a desktop
publishing program I use on the palmtop) also uses CP850, and it does
have the missing characters.  The quotes are 177 and 178 in EVP (147
and 148 in Latin 1).  Any ideas?    Thanks.

BTW - what version of PFE do you have?  I had problems with V1 but a
later one (v1.2 - I think) works fine.


Later

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 16:35:04 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Palmtop Circuit user report 2 of 2
Comments: To: Paal Rasmussen <paal@AH.TELIA.NO>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Paal,

> If you enter say a long tailed pair transistor circuit,

I'm not sure what you mean here - do you mean a special kind of
transistor circuit or do you mean some kinnd of common transistor
circuit, just containing a lot of transistors?

> does it calculate
> distortion?

AFAIK - no. But I can be wrong here - if it's important to you, please
contact Tamas Feher; either he can answer you this question, or he can
forward your question to Design Soft.

> Does it do DC analysis - temperature drift and so on?

Yes.

> What transistor models does it use?

NPN
PNP
NMOS Enhancement type
PMOS enhancement type
NMOS Depletion type
PMOS Depletion type
JFET p-channel
JFET n-channel

and in every group there are several types to be choosen.

> Can you define your own components?

It's possible, but a little bit difficult. You have to write all
parameters into a file and then compile and link it.
The manual describes it quite exactly.

> Are export/import functions present to/from SPICE or ORCAD or other
> industry standard progs?

AFAIK, Design Soft will release a converter program, if enough people
ask for it, but please ask Tamas Feher about this; I'm not involved in
these things.

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 11:47:50 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Errormessages
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hello!

After some messing around in my reader.cfg file I suddenly
get the message:"unable to launch editor,code 2" when
trying to write an email with memo.

I also get the message:"error 65508" when trying to run setup.exe

I have www/lx 1.1


Any help is welcome.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 12:02:42 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Nemeth <tnemeth@COMPUSERVE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Nemeth <tnemeth@COMPUSERVE.COM>
Subject:      Back Up/CPack good news/bad news
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=ISO-8859-1

Hi Gang,

First off, Thanks Neill, Geert, Longden, Steve, Peniel for the helpful
advice, sugggestions and data files. And Mike for humor.   It is yet
another testament of the gentility of this list.  Other lists seem to be
loaded with a lot of really angry, road rage-filled people.  I guess we'r=
e
all stressed out in this life.  So thanks for keeping it all together and=

helping out a computer klutz like me.  Everybody take a bow!

 Good News and Bad News on the Back Up/CPack Front:

Good News:  Thanks to Neill's multiple efforts, I now have a functioning
copy of CPack on my desktop.

Bad News:  CPack still won't connect to my 200. Exorcism has no effect
whatsoever....

Good News:  Transfile decided to work again.  Backed up all my data such =
as
it is.  =


Bad News:  Until when?

Good News:  In total frustration, I ordered an internal PCMCIA drive.

Bad News:  It'll take a coupla weeks to get here.

Some questions remain:
Regarding CPack, I shut all other apps down but CPack wouldn't connect. =

But as noted above Transfile did kick in.  Nonetheless, any ideas on maki=
ng
CPack a viable alternative?  Seems like the Desktop Com Port won't free u=
p
for CPack but obviously did for Transfile.  Is there a way to control Com=

Ports from Win 98?  I have not been able to do so (or much of anything el=
se
as my msg's seem to indicate!).

Again thanks to all!
Tom still in Muscat

PS And a Happy, if belated, 224th Birthday to all you ex-jarheads out
there.  May our fallen brothers rest in peace.
Semper Fi.


 =

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 09:50:21 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, arthurhu@HALCYON.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Arthur Hu <arthurhu@HALCYON.COM>
Subject:      Re: HPLX-L Digest - 3 Nov 1999
Comments: cc: LISTSERV@UCONNVM.UCONN.EDU, jeffj@SCOTT.NET
MIME-Version: 1.0

please reply to me - my skyglobe seems to need more than
VGA, does it work in CGA mode too??

On 1999-11-04 HPLX-L@UCONNVM.UCONN.EDU said:
   >There is one message totalling 36 lines in this issue.
   >Topics of the day:
   >1. SkyGlobe
   >** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
   >--------------------------------------------------------------------
Arthur Hu "Fairness in Diversity" Kirkland WA
http://www.leconsulting.com/arthurhu/

Net-Tamer V 1.11P - Registered

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 17:56:46 GMT
Reply-To:     deanl@bigfoot.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Dean L." <deanl@BIGFOOT.COM>
Subject:      HELP NEEDED
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

Any idea what works to convert the 200lx   Note Pad files to something a
HP 680 could use?
BTW  I am finding the 200 LX  is the better unit but I need the features =
of=20
the 680 and the lighted screen..
16 meg is not enough memory and I will have to get more soon.
Thanks all
Dean Lonning
W5GXL

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 13 Nov 1999 07:41:58 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: Requalifying members
Comments: To: Daniel Hertrich <d.hertrich@GMX.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Why not add one line to the .signature added to the end of each
post, to read:

    To unsubscribe click here : mail@uconnvm.ucon.edu?Subject=unsubscribe

I forget the actual syntax, but that should describe process I have
in mind. Downside is evey email grows by 60 characters +/-.

HTH,

Ken
khansen@njcc.com

-----Original Message-----
From: Daniel Hertrich <d.hertrich@GMX.DE>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Wednesday, November 10, 1999 11:07 AM
Subject: Re: Requalifying members


>Hi Al,
>
>>    Not sure if it really helps or not...I know it has deleted active
>>    members who missed the CONFRIMATION REQUEST message, but I usually
>>    pick up on those manually. The confirmation sysytem has been in
>>    place from Day 1.
>
>What about such a solution:
>
>Why not send one message a month to the list
>
>Subject: How you unsubscribe yourself
>Text: If you want to unsubscribe yourself from the list, please do the
>following: .......
>
>That's one message per month that prevents maybe 3 other messages per
>month 'unsucscribe' or 'please take me off your list' or similar ;-)
>
>GTX
>daniel
>
>
>--
>-------------------------------------------------------
>Daniel Hertrich                       d.hertrich@gmx.de
>homepage:                        http://daniel.hplx.net
>telephone:                         +49 (0)177 795 55 49
>-------------------------------------------------------
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 12:46:21 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: 1000cx software?
Comments: To: jason bugler <kovaxal@HOTMAIL.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I used to have an HP 1000cx, but upgraded to a 100 LX and
then a 200 LX, so I spent very little time with it - any way, the
manual for the 1000cx had instructions for "uploading" the
required files to a host PC from the 1000cx over a serial
connection, IIRC.

Of course, a compact flash card would come in very handy with
such a machine...

Good luck,

Ken
khansen@njcc.com

-----Original Message-----
From: jason bugler <kovaxal@HOTMAIL.COM>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Thursday, November 11, 1999 9:36 PM
Subject: Re: 1000cx software?


>>Obviously, there are other ways but getting the first communications
>>module on the HP will be necessary without a filer version.
>
>If I could just get connected to the handheld I would be fine, what needs
to
>be running on the handheld for it to establish communications with the
>desktop? the filer?
>It looks like lap link program would work fine if I knew how to use it.
>
>ANYONE? =)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 21:09:59 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Reinhard Mueller <molitor@01019FREENET.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Reinhard Mueller <molitor@01019FREENET.DE>
Subject:      WP 5.1 faxing
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Hello,

Not long ago someone mentioned that it is possible to fax with WP
5.1. How do I do so? I cannot find any faxing options with my WP
installation.

Thanks,
Reinhard


Goin' Postal - HP 100/200LX (v3.08) REGISTERED

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 10:39:30 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, bobv <bobv@SOS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         bobv <bobv@SOS.NET>
Subject:      Re: PE/PIM
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

>> Thanks Avi
>>
>> I have ver 2.2c 3 Sept 99.
>>
>> I checked your site and the most recent ver is 2.1.
>>
>> What version are you running?
>
>2.2 19Jun99

I have re-tested, and it doesn't seem to be an issue of the version.

Opening an new file in PE and naming it "123456789.TXT" then writing
data,
saving and exiting PE, will yield the following results:

A file named 12345678.III and a file named 12345678.BAK will be created.

Both will have NO saved data, but be empty instead.

I realize that it is my responsibility to count the number of letters in
files
I wish to create, but we don't always do what we should, do we?

Bob

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 21:37:28 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: WP 5.1 faxing
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Reinhard,

> Not long ago someone mentioned that it is possible to fax with WP
> 5.1. How do I do so? I cannot find any faxing options with my WP
> installation.

You need WP 5.1+ (5.1 plus).

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 21:19:26 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Reinhard Mueller <molitor@01019FREENET.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Reinhard Mueller <molitor@01019FREENET.DE>
Subject:      Skyglobe & CGA was Re: HPLX-L Digest - 3 Nov 1999
Comments: To: arthurhu@HALCYON.COM
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Hi Arthur,


> please reply to me - my skyglobe seems to need more than
> VGA, does it work in CGA mode too??

Maybe it's a newer version. Try to get Skyglobe 3.6 from the Super
Site. It runs on the lx without problems (no setup, command line
switches etc. necessary).

Reinhard



Goin' Postal - HP 100/200LX (v3.08) REGISTERED

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 22:27:15 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: We still need help
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

We succeeded in finding a solution for the palmtop-mobile
problem.

We did it with the help of this list (distributed intelligence)
and by accident. After it was clear, that a short circuit
between the photo diodes contacts suppresses all errors,
(thanks Mark!) I was very enthusiastic again. Daniel Hertrich
designed a low pass filter and asked me, if I could implement
it in my test machine and see if it works. But I made a double
error in implementing his solution. Boy, you can make even more
than two errors in soldering together a capacitor and a resistor
if you are new to the business ;-)

But what shall I say, my errors worked. An analysis showed, that
in fact I only connected one leg of the photo diode to ground.
All my other soldering had no effect. And that is the solution.

Sorry to say, but it doesn't work with every palmtop. We tested
six, and four did work, two don't. We also don't know yet, if
the solution could harm the palmtop. I'm sending my test
machine to Daniel, and he will do further investigations.

This little improvement of the palmtop should keep it alive in
the years to come with the increasing number of mobile phones
with built in IR modems. No need to switch to a Palm or WinCE
for this reason.

Thanks again to everybody who was involved into this thread.
You were a great help and motivation in solving this problem.
I am amazed by the unselfish worldwide cooperation. Special
thanks go to David Sargeant. Without his detailed explanation
on how to take a palmtop into pieces, I would not have been
able to do all these tests.

Now if we only knew why it works, we could come up with a
general solution.

BTW, it's the leg close to the backup battery which needs
to be connected to ground.

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 22:54:46 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      Re: Log-in problem with new ISP
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Avi, Andreas, Stuart, Laurence,

everyone of you should, of course, get a separate
acknowledgement and thanks, however to save on bandwidth, I
write to you collectively.

You were dead right, the "garbage" turned out to be a CHAP
script and the new connection worked on the first try ! BTW, not
surprisingly, the solution is also hinted at in the WWLX
manual of 03-14-99 (chapter 4.6: "...exchange of information
does not depend on prompts."). Again !

The only problem left is switching between the ISPs setup in
WWW.CFG. Telephone number and login name can be changed and
looked at with SHIFT F5 and CTRL F5 respectively. However, the
smtp and pop3 server names for the ISP do not change with F5
and I have to do the changes manually via EXTERNALS/SETUP/F4.

Did I miss something again ? Posthelp.txt (POST/LX2.0), in its
chapter on "Using multiple ISPs", deals with downloading and
uploading through multiple ISPs from/to the SAME MAILBOX
situated at one of the ISPs, but not with multiple ISPs and
the respective multiple mailboxes. (BTW, that chapter mentions
a "mailbox section for CIS in POST.CFG" and a "mailbox section
for SOL (in POST.CFG)": I only see one general Mail section
with parameters for one ISP. Different sections for each ISP I
find only in WWW.CFG, at the end ("data added by WWWSETUP"),
without mentioning smtp and pop3, however.

Is it correct that different smtp/pop3 server names have to
be entered manually every time ? I would not be surprised if I
got it totally wrong.

Thanks for a hint !
Winfried

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 23:01:48 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: OT: WP51 graphics driver?
Comments: To: Laust Brock-Nannestad <laustbn@DIKU.DK>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Yes, on the Corel FTP under the dosapps tree or so you will find
the graphics driver disk. The Vesa should be included there.

-goe-

-----Original Message-----
From: Laust Brock-Nannestad <laustbn@DIKU.DK>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Samstag, 13. November 1999 14:04
Subject: OT: WP51 graphics driver?


>Hi all,
>
>I know this is off topic, but there are many WP51 users on the list...
>
>It's impossible to find WP51 graphics drivers for (all?) newer graphics
>cards. It used to be standard for graphics cards to come with such a
>driver, but alas no more (sniff...)
>
>So, does anyone know if there is a VESA graphics driver for WP51? VESA is
>available on pretty much all newer cards. Running 640x480 in 16 colours
>just seems a bit pointless on an 8MB graphics card with an 17" monitor :-)
>
>
>Cheers,
>
>Laust
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 23:10:24 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: schittke@RZ.FH-AUGSBURG.DE
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>> This is for sure here. By the way, this is another advantage of
>> WP5.1+ to use it multilingual.
>>
>Indeed? The version I have is also just plain english. I have not
>found any German spelling, hyphenating and/or thesaurus abilities.
>Sure enough there is an all-German version of WP5.1 but the same
>holds true for Word (it's just not free - neither is WP!)

multilingual thinking in WP51 goes a step deeper than Microsoft
software does ... It means e.g. to print non-standard characters.
Do you know of any M$ Software that is able to print in languages
like chinese, japanese, hebrew, cyrillic, turkish, greek
WITHOUT any add-on software and in EVERY app-language
(even in US-english versions)?

>> With WP 5.1+ on my hp200lx I am able to send faxes. How can this be
>> done with Word 5.5? Is there any fax printer available? Did I miss
>> that point during setup?
>You did not miss it - it is not there. On the other hand I did not
>install it on WP5.1 either, because none of my fax devices was
>recognized by the installation program.

It supports Class 1 and Class 2 faxes. What 'standard' do you use?

>On the
>other hand the somewhat peculiar user interaction of WP lends for a
>very slow learning curve for novices.


Oh no. Peculiar is not the right word. It is DIFFERENT from Microsoft,
not peculiar.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 23:16:10 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Unsubscribe + WorldWar3
Comments: To: schittke@RZ.FH-AUGSBURG.DE
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

>I am really sorry that you took offence,it wasn't my meaning
=2E
=2E
>Und ich bin nicht ein Arschloch!


Well, well, if somebody wants to write sentences, that are not
understandable
by the most of the list, he or she has to use a more practical language f=
or
this,
like schwizerd=FCtsch or t=FCrk=E7e etc.

And yes: I will understand these languages. But who am I?

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 23:30:28 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Re: Word 5.5 vs. WP 5.1 on the palmtop
Comments: To: Arvidas Bajercius <arvidas@NETSCAPE.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>Run the Word screen configuration program, (I believe it's named
makevid.exe)
>to create a new screen.vid, and you should be okay.


It tells me, that it wants some options on the command line, but doesn't
tell me
about the possibilities (the peculiar M$ stuff, you know ... ).

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 23:31:40 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: WP 5.1 faxing
Comments: To: Reinhard Mueller <molitor@01019FREENET.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

It is only since WP51+. In WP51 it wasn't available.

-goe-


-----Original Message-----
From: Reinhard Mueller <molitor@01019FREENET.DE>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Sonntag, 14. November 1999 21:11
Subject: WP 5.1 faxing


>Hello,
>
>Not long ago someone mentioned that it is possible to fax with WP
>5.1. How do I do so? I cannot find any faxing options with my WP
>installation.
>
>Thanks,
>Reinhard
>
>
>Goin' Postal - HP 100/200LX (v3.08) REGISTERED
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 17:36:47 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Morphy One page
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi everyone,

I've put up a small page about the Morphy One (info, specs,
links, etc) on my site. As it currently stands, it probably
doesn't contain anything that you don't know already know,
but some of the links (e.g. the AMD Elan chip homepage and
the Phoenix PicoBIOS homepage) might be of interest. I've
also linked to the Japanese sites that have been mentioned;
unfortunately, I couldn't find any English-speaking ones :-(

You can find the page at http://games.hplx.net/morphyone.htm;
comments, suggestions, info all welcome.

 -Mike http://games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 15:59:13 -0500
Reply-To:     theise@netins.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Theodore Heise <theise@NETINS.NET>
Subject:      Re: Time Tracking...

A Meshar writes:
>
> But I write to tell you TimeTracker/LX has a timer. It is an
> undocumented feature, and it basically shows on the screen the
> time in digital characters... :)
>
> I'll send email separately to you to tell you how :-)

How about other registered users?  I'd like to know too!

Ted

--
Theodore Heise     <theise@netins.net>     West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 16:07:05 -0500
Reply-To:     theise@netins.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Theodore Heise <theise@NETINS.NET>
Subject:      Re: Time Tracking...

A Meshar writes:
> Steve Dowell <sdowell@HARRAHS.COM> wrote:
>
> > I also tried out the Timetracker/LX demo. The thing I didn't like about
> > it was that if you stopped one task to work on an other, and then came
> > back to the first, you have to re-enter another line for the first task
> > again. Yuck. (Unless I'm misunderstanding it...certainly a possibility).
>
> I think you can go back to the original line and update its
> termination time. But it uses two out of three parameters to
> calculate the third: Start time, end time, duration. So if you
> enter start and end times, it calculates duration from those
> two. If you return to the prev. entry and update the end time,
> then you can get a heck of a lot more billed time :) ,but it
> is not exactly honest to do.

I think the point was to be able to start a second session of the same
activity without having to re-enter (for example) the information in the
Memo field.

Ted

--
Theodore Heise     <theise@netins.net>     West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 10:53:06 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, david.eggins@USA.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Eggins <david.eggins@USA.NET>
Subject:      Re: PCMCIA Floppy disk
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hello all

Just to add some more info to my post.

I got up the courage to plug in the PCMCIA Floppy this morning.  It has
a small amount of flash ram in there, which has all of the drivers.  I
also downloaded some drivers off the web.

I ran the dos driver install program, but it said that the socket
services is not version 2.0, and it could not install.

The question is, is this a physical limitation, or are these drivers
just written for version 2?

Is anyone out there using a PCMCIA floppy disk?   Would you lend me the
drivers to see if they work?

I would love to get this working on the palmtop.

Any help would be appreciated

David Eggins


1 day 13h40m07s ago ...
On Sat, 13 Nov 1999 22:06:46 +1100 (EST), David Eggins <david.eggins@USA.N=
ET> wrote:

> Hello everyone
>
> I have just purchased a Sony TRV900 MiniDV camera.  This camera has a
> PCMCIA card slot, and a external PCMCIA Floppy disk.
>
> My question is:  Is there any hope at all that I would be able to use
> this floppy disk with the palmtop?  I know that there is a driver on
> the web to use this with a laptop, but it is for windows 95.
>
>.....

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 01:01:00 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Karlheinz Juenemann <Karlheinz_Juenemann@MAGICVILLAGE.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Karlheinz Juenemann <Karlheinz_Juenemann@MAGICVILLAGE.DE>
Subject:      STOPMAIL
In-Reply-To:  <199911142353.KAA14155@fepa.mail.ozemail.net>
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hello,
I tried to cancel my subscribtion to the list several ways without success.
Can any body tell me how it works?

KJ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 00:33:10 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              chris@AMLOG.DEMON.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Randle <chris@AMLOG.DEMON.CO.UK>
Subject:      Re: PE/PIM
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="__next_part__1295388592__"

--__next_part__1295388592__
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On Fri, 12 Nov 1999 16:17:21 -0800, bobv <bobv@SOS.NET> wrote:

> Chris and Avi,
> Thanks for the replies. I must have an old version (thoght I got the
> most recent)
> How do tell what version you are running?
> Thanks
> Bob

Help -> About on my copy shows 2.2

Also shows on the top left of the title bar. If it shows 2.2+,
it means the file is being interpreted by PE as a PIM file.
Ctrl-X P toggles.
--__next_part__1295388592__
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit


Chris Randle (chris@amlog.demon.co.uk)



--__next_part__1295388592__--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 01:21:53 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              jason bugler <kovaxal@HOTMAIL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         jason bugler <kovaxal@HOTMAIL.COM>
Subject:      Re: Unsubscribe
Mime-Version: 1.0
Content-Type: text/plain; format=flowed

>
>Hello
>
>My ISP closed my Internetconnection for 6 days so I was unable
>to unsubscribe automatically so to speak.

>When I finally could connect there was 376 email waiting,not
>so funny.


  If you have shell access (unix only) to the mail server you could telnet
to the mail server or whatever server your mail is placed, then use mutt to
open the mailbox, mutt will usually save any "broken" mail boxes.  To use
telnet in windows go to 'start' then 'run' and type in "telnet
the.ip.address.lalala".  For linux/unix you already know.

  Tech support should be able to tell you all the info you need to access
your mailbox IF they have half a brain.

  If they don't run unix for their mail server then disregard this message.

  I have opened .mailboxes close to 500mb with mutt.
  Aah.......unix.

- J

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 01:42:18 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: WWWLX - Delete messages as they are downloaded
Comments: To: david.eggins@USA.NET
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> The delete command for each email is only applied on the server when
> the very last email is downloaded.  This means that if the palmtop
> times out during downloading my 300 a day emails, I get all of the
> already downloaded messages again!

You might try (with limitations) using Ctrl-Del while pointing to that
mailbox.  _I THINK_ is will find a list of the ones downloaded and make
them into a "delete list" and then delete them when you next log on.  (I
don't know if it does this if it is configured to delete as they are
read???)
BUT.... if this works, you may also lost any partial message(s) that
were not completely downloaded.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 21:28:57 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: IRC/LX Announcement
Comments: To: A Meshar <sponsor@FTEL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> IRC/LX is now available for sale at D&A Webpage.

What *is* IRC ??  Why would I be interested in it?  What do you do
with it or use it for?

curious...
Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 21:29:01 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Requalifying members
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Why not add one line to the .signature added to the end of each
> post, to read:
>
>     To unsubscribe click here : mail@uconnvm.ucon.edu?Subject=unsubscribe

I think the info line that's already added to the bottom of every list
post is more than enough.  Those people that keep asking to be
unsubscribed aren't looking at the bottom line, no matter what it says.

Besides, how do I 'click' from WWW/LX or other non-HTML program?  :-)

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 20:58:33 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: IRC/LX Announcement
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Sun, 14 Nov 1999 21:28:57 -0500, Russel Brooks <rlbrooks@POBOX.COM> =
wrote:

> What *is* IRC ??  Why would I be interested in it?  What do you do
> with it or use it for?

IRC is an ancronym for Internet Relay Chat. By logging onto one of the
various chat networks, you can chat in real time with others from all =
over
the world on subjects ranging from quite tame to ones that which make you
blush with embarassment.

IRC/LX appears to be a DOS port of ircII or BitchX with a splash of PAL
programming thrown in for good measure. The source code for ircII is =
widely
available and is the world's most popular IRC client. In today's world =
most
people probably use mIRC or one of the other Windoze clients, but the =
purist
will still want to use either ircII or BitchX on a unix box.

One thing that is a possible problem with ircII are possible security =
flaws
in source code and it is recommended that you compile it yourself. Since =
you
are connecting to a network with IRC it is possible that people can hack
your machine without your knowledge while you are connected. There are
several ways of doing this and some are horrendously on mIRC. I am =
curious
about the level of security provided by IRC/LX.

I have only played with IRC/LX a little since Saturday and since I only
have the unregistered demo copy from the D&A web site, I am limitied in
really using it for any length of time. I do need to find out if some of =
my
scripts for ircII can somehow be implemented with IRC/LX.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 22:06:45 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: PE/PIM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> I have ver 2.2c 3 Sept 99.

I have version 2.2d 16 Sept 99.  I downloaded it recently from D&A =
website.
Are you sure the most recent one on the site is 2.1?

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 22:59:51 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      FS: 200LX - upgraded to 5MB
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Since I just purchased a DS 32mb 200LX, I've put my 5MB 200LX up for auction on eBay (too
bad I can't justify keeping it as a "spare").  Someone, please give it a good home.

It's nearly perfect...no hinge, latch or screen problems.

 http://cgi3.ebay.com/aw-cgi/eBayISAPI.dll?ViewListedItems&userid=thoover

BTW- in my auction ad, I state that I will not ship outside the US.  If someone
from this list lives outside the US, please feel free to bid anyway.

--
Tom Hoover N5NTM <tom@hisword.net> - http://www.hisword.net/tom
    - checkout HisWord(tm) Palmtop Bible at the above URL -
     ------- finger thoover@pobox.com for PGP key --------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 21:27:03 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, bobv <bobv@SOS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         bobv <bobv@SOS.NET>
Subject:      Re: PE/PIM
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

>> I have ver 2.2c 3 Sept 99.
>
>I have version 2.2d 16 Sept 99.  I downloaded it recently from D&A
website.
>Are you sure the most recent one on the site is 2.1?
>
>Steve Carder

No, it just said that it was. I will download and see.
Bob

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:02:40 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Greg Dwyer <gdwyer@MELBPC.ORG.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Greg Dwyer <gdwyer@MELBPC.ORG.AU>
Subject:      Infrared Connection to Moble Phones
In-Reply-To:  <1JgrON3QQG41YNraknAjb9D7dcBi@4ax.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

What mobile phones have been found to be able to connect to a HP100LX using
the infrared port?

I would be most interested in any feedback you had on connecting the two
devices together.

--
 ,-._|\  Regards
/  Oz  \ Greg Dwyer <gdwyer@melbpc.org.au>
\_,--.x/ P.O. Box 432 Warrandyte Vic.Australia 3113
      v  PGP location <www.privacy.com.au>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 14 Nov 1999 09:48:37 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      Re: Unsubscribe + WorldWar3
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

i enjoy a litte fluffiness on the list, but "Arschloch" goes too far

you are therefore warned - one more time, and you're out! :)

here is how i would approach the subject (ww2) with my lx in mind:

one use of my lx is to write my diary, not just for myself, but for my
future children

i wished i could now read the diary of my grandfather who died as a
resistance fighter against the German occupation in France - it would be
fascinating

if he had had an lx i could  now publish his biography

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:36:58 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russell Hemery <rhemery@POWERUP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russell Hemery <rhemery@POWERUP.COM.AU>
Subject:      Have I??
Comments: To: Nathalie Bugeaud <tps-seti@WANADOO.FR>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Hello Nathalie

I apologise for this question....

Have you received thge Jam file as yet.... I am not sure if I sent it yet..

Russell

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:41:21 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russell Hemery <rhemery@POWERUP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russell Hemery <rhemery@POWERUP.COM.AU>
Subject:      Apologies
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Hi

I meant last message to go direct.. Apologies for bandwidth

Russell

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 09:00:00 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Reinhard Mueller <molitor@01019FREENET.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Reinhard Mueller <molitor@01019FREENET.DE>
Subject:      Fluff: Re: Unsubscribe + WorldWar3
Comments: To: tps-seti@WANADOO.FR
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

On 11-14 09:48am, you wrote

> i enjoy a litte fluffiness on the list, but "Arschloch" goes too far
>
> you are therefore warned - one more time, and you're out! :)

Now I fear that a lot of people are going to believe that they
finally found the word they have to put in the subject line for
unsubscribing from the list.

Hard times to come for the people who felt that those
"unsubscribe" messages were annoying.

Reinhard



Goin' Postal - HP 100/200LX (v3.08) REGISTERED

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 00:22:56 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Pocket references (esp quotations)
In-Reply-To:  <0.4ce9c0df.255ec514@aol.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 13 Nov 1999 GWilson241@aol.com wrote:

> I would like to obtain a copy. Perhaps you could upload it to SUPER

Can't do that, as it's a commercial package, and SUPER could get in
serious trouble for posting that kind of thing.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 03:20:47 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      WWW/LX PLUS a flop???
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I am a www/lx 1.1 user,and as everybody praise www/lx plus I downloaded=
 its demo to try it.
But I get 8 out of 10 times the message:"problem recieving data,cannot=
 create file"when trying to open pages on internet.

In this aspect plus seems no better than the old www/lx

Furthermore,the graphics in the email/folder section is not
so good/heavy as in www/lx 1.1.Not to mention when writing an email,then=
 the text is by some idiotic reason still in this little rectangle which=
 give not only  a very bad overview,you almost also need magnifying=
 glasses to read it.Is it really suppose to be like this?

So far not so good.



Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 03:42:50 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud ! <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Unsubscribe + WorldWar3
Comments: To: Nathalie Bugeaud ! <tps-seti@WANADOO.FR>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Nathalie Bugeaud wrote:


"i enjoy a litte fluffiness on the list, but 'Arschloch' goes
too far"


This is the actual "Arschloch" from sweden answering.
Yes,I agree with you.My first spinal cord reaction was to apologize=
 for my joke about Germany and WW3,and so I did in an email.But later=
 I regret that I did this as Scittke actually called me an asshole.Therefor=
e prof Schittke,I take back my apology I gave you.(ofcourse not for=
 other Germans on the list)


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 10:02:54 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Franklin Eekhout <franklin@ONLINE.NO>
Subject:      Fluff: Being nice...

More fluff for all, I got carried away...

> one use of my lx is to write my diary, not just for myself, but for my
> future children
> i wished i could now read the diary of my grandfather who died as a
> resistance fighter against the German occupation in France - it would be
> fascinating

One way is to be nice and visit the old folks one knows. Take time to talk
and a dictaphone with you. :-) There are lots of good stories about, if one
likes a good story. There is one strange phenomena though, everybody ends up
on the 'right' side afterwards...

No offence to anybody, but I have met only one old man who ever defended the
'wrong' side of WWII. He had his reasons, and I believe they are still valid
today, seen isolated from other peoples tribulations.

In today's world I think that no country or group of people, ethnic or
otherwise, can safely say that they or their forefathers have a clean
warrant. We all have blood on our hands. The clue I think is to make sure
our children understand the mechanisms that control us. We should not accuse
or lay the blame on a new generation, who have or may even have benefited,
but remember the doings of the old. The problem therein is that we use the
same generic term for both old and new generations in describing events.
This breeds contempt on one side, repressed anger and guilt on the other.

But maybe one needs a good rooting out now and again of the general
population, or a common threat to consolidate ranks? One can wonder. I am
banking on multi-resistent bacteria, maybe TB, being the next scourge in the
western world, even though there are few cases so far.

Have a nice day!

Franklin

Whose great-grandfather took the gold mine dynamite store with him when he
joined the Boers against the then bloody English. So the story goes... :-)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 02:28:04 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Terrence Chun <tchun@UCLA.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Terrence Chun <tchun@UCLA.EDU>
Subject:      IPex or Mappot
MIME-Version: 1.0
Content-Type: text/plain

Does anyone have any experience with IPex or Mappot and any good
applications for them?  I have been fiddling with them this weekend and
they seem very interesting and have a lot of potential for expanding the
capabilities of the database engine of the LX, but the notation is a
little cumbersome.

-- Terry

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 11:24:24 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Thanks to Andreas
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 13 Nov 1999 18:49:02 -0800, A Meshar <sponsor@FTEL.NET> wrote:

> Paulo,
>
> since Andreas is not hanging out here AFAIK, I took the
> liberty to forward t him your message.

I think he lurks around here from time to time :-))

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 11:24:25 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Post/lx and downloading headers was:Re: Unsubscribe + WorldWar3
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 14 Nov 1999 02:58:05 -0800, Lars Hedstroem <nxw988e@TNINET.SE> wrote:

>,but there is one
>
> thing I don't understand.You said you can only download headers
>
> in your emailboxes,but the emails you don't download do you
>
> leave them on the server of your ISP?

I can of course download the message as normal. But when I choose to
download headers(by "only I mean the headers and not the whole message)
I can choose either to delete the messages I don't download or leave
them at the server.

This is what I do:

I download headers.

Then I go through the mailbox and choose the messages I want to
download (on next run)

Then I go at the bottom of the mailbox and press down and I can then
choose if I want to delete the headers locally in the box or if I want
to delete the messages from the server too.. I can also delete the
headers locally and leave the messages at the isp's.

If I choose to just to delete the headers locally then the messages I
don't download are left on the server. This is not a good idea because
the mailboxspace are limited. But sometimes I use this option to leave
certain messages on the server to download later because of eiter
limited time or limited bandwidth (ex. when using my Nokia 7110 soon:-)

If you choose to delete the headers in you local box by accident and at
a later time you want to download the message or the header again, you
then have to delete the .old file in the www/lx directory.

Andreas if you are listning (or Avi) could you maybe have this in the
menu so we don'nt have to shell to dos to do this?


> Concerning ww2,I agree that we stop that discussion,I just

I agree..

> BTW,did you find the Nokia with a fold up screen?

No I forgot to go looking. Do you have any url? I have a full time job
waiting for my Nokia 7110 :-))

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 2049 02:29:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: Errormessages

Isn't this the same error reported by ?
"Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
RE: Error 65508?
BTW I have not received that error message yet
----Original Message-----
>From: Lars Hedstroem <nxw988e@TNINET.SE>
>Date: Sunday, 14 November, 1999 08:47
>After some messing around in my reader.cfg file I suddenly
>get the message:"unable to launch editor,code 2" when
>trying to write an email with memo.
>I also get the message:"error 65508" when trying to run setup.exe
>I have www/lx 1.1
>Any help is welcome.
End.Of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 18:28:37 +0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Anand Rao <slim1005@HK.SUPER.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Anand Rao <slim1005@HK.SUPER.NET>
Subject:      WWW/LX access using calling cards
In-Reply-To:  <HPLX-L%99111503425071@UCONNVM.UCONN.EDU>
Mime-Version: 1.0
Content-Type: multipart/alternative;
              boundary="=====================_32976296==_.ALT"

--=====================_32976296==_.ALT
Content-Type: text/plain; charset="us-ascii"

I recently installed a registered version of WWW/LX in the midst of a long
overseas trip. The roaming access feature (using IPASS) of my ISP did not work
very smoothly and I presume it is due to some glitch at the ISP's end which I
will investigate now that I am back home.

I had to call my ISP in Hong Kong via IDD which I did as I had to get to those
messages. However, I could not use my AT&T calling card to establish the
connection. The WWWSETUP program could take in the long string, but the
connection could not be established. I could only hear the voice prompts on the
speaker. I tried inserting various lengths of pauses using commas but it did
not work. Any suggestions?

The only option was to use the hotel phones, at the AT&T operator assisted
rates plus a 35% markup. The $89 I paid for WWW/LX was peanuts compared to what
the hotels ended up making on the phone calls.

Many thanks

Anand Rao.
--=====================_32976296==_.ALT
Content-Type: text/html; charset="us-ascii"

<html>
<font size=3>I recently installed a registered version of WWW/LX in the
midst of a long overseas trip. The roaming access feature (using IPASS)
of my ISP did not work very smoothly and I presume it is due to some
glitch at the ISP's end which I will investigate now that I am back
home.<br>
<br>
I had to call my ISP in Hong Kong via IDD which I did as I had to get to
those messages. However, I could not use my AT&amp;T calling card to
establish the connection. The WWWSETUP program could take in the long
string, but the connection could not be established. I could only hear
the voice prompts on the speaker. I tried inserting various lengths of
pauses using commas but it did not work. Any suggestions?<br>
<br>
The only option was to use the hotel phones, at the AT&amp;T operator
assisted rates plus a 35% markup. The $89 I paid for WWW/LX was peanuts
compared to what the hotels ended up making on the phone calls.<br>
<br>
Many thanks <br>
<br>
Anand Rao.</font></html>

--=====================_32976296==_.ALT--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 08:42:20 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lionel Zuckier <zuckier@AECOM.YU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lionel Zuckier <zuckier@AECOM.YU.EDU>
Subject:      James Cummiski's thesis
In-Reply-To:  <199911150502.AAA22833@post.aecom.yu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

I was surprised to find a large published work on the 200lx and
attachments which I haven't seen quoted in the usual laundry-list of
relevant sites (http://www.mbay.net/~jccummis/thesis/html/Chapter6.htm).
It is somewhat out-of-date but still contains a lot of information, from
quite an interesting vantage point. From what I can glean from elsewhere
on the web, the author turned to the dark side (windows CE that is), but
does anyone know what became of him, or where he can be reached (the
emaill address on the thesis is defunct)?

Thanks,


Lionel


_____________________________________________________

Lionel Zuckier, MD
Nuclear Medicine
Albert Einstein College of Medicine
Bronx, NY 10461

clinic phone: (718)-918-4895
_____________________________________________________

NOTE: I WILL BE ON SABBATICAL 7/99 - 6/00 & CAN BE REACHED AS FOLLOWS:

email: zuckier@aecom.yu.edu
fax: 603-843-1532 (U.S. number)
phone (emergency only): 011-972-2-561-0735

_____________________________________________________

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 09:10:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, kovaxal@HOTMAIL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Jason B." <kovaxal@HOTMAIL.COM>
Subject:      Nathalie "forgot"the France fascism
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

To Nathalie:

And if my grandfahter had had an LX I could have written

his biography about the France fascismoccupation of Indochina!

Ching Chong from Indochina

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 09:10:40 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Martin Bergvill =?iso-8859-1?q? T=?= Mailing List
              <HPLX-L@UCONNVM.UCONN.EDU>," <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
Comments:     RFC822 error: <E> Unmatched parenthesis in address field.
From:         Undetermined origin c/o LISTSERV administrator
              <owner-LISTSERV@UCONNVM.UCONN.EDU>
Subject:      Re: Post/lx and downloading headers
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Martin wrote:

"I can of course download the message as normal. But when I
choose to
download headers(by "only I mean the headers and not the whole
message)
I can choose either to delete the messages I don't download or
leavethem at the server."

That sounds great,man!!!!

"This is what I do:

I download headers.
Then I go through the mailbox and choose the messages I want
todownload (on next run)
Then I go at the bottom of the mailbox and press down and I can
thenchoose if I want to delete the headers locally in the box or ifI=
 wanto delete the messages from the server too.. I can also deletetheheader=
s locally and leave the messages at the isp's. etc"

Is this also valid for WWW/LX 1.1?Cause I have not the Plusversion.


BTW,will you look at EM in football?I hope for Norways sake that you=
 won't meet Sweden to early in the competition and get
knocked-out:-))



"No I forgot to go looking. Do you have any url? I have a full
time job waiting for my Nokia 7110 :-))"


Yes somewhere among my magzines I have that commercial about the Nokiaphone=
 with a foldupscreen,I will take a look today and see if I find it.

Lars Hedstrom/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 09:34:40 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: STOPMAIL
Comments: To: Karlheinz Juenemann <Karlheinz_Juenemann@MAGICVILLAGE.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I tried to cancel my subscribtion to the list several ways without success.
> Can any body tell me how it works?
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

You can unsubscribe at the url shown at the bottom of every post (the
just above).  The list may still be sent to you for several hours or up
to a day until your request is completed.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 07:34:19 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: WWW/LX PLUS a flop???
Comments: To: Lars Hedstroem <nxw988e@TNINET.SE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon, 15 Nov 1999 09:32:09 -0500 (EST)

06h11m26s ago ...
On Mon, 15 Nov 1999, Lars Hedstroem wrote:

> I am a www/lx 1.1 user,and as everybody praise www/lx plus I downloaded
> its demo to try it. But I get 8 out of 10 times the message:"problem
> recieving data,cannot create file"when trying to open pages on internet.
>
> In this aspect plus seems no better than the old www/lx

Sounds like it needs more memory to play in.  Maybe run it in a MaxDOS
session with PE for the editor...  Maybe Avi or Andreas will jump in
here with a more authoritative answer.

> Furthermore,the graphics in the email/folder section is not
> so good/heavy as in www/lx 1.1.Not to mention when writing an email,then=

> the text is by some idiotic reason still in this little rectangle which
> give not only  a very bad overview,you almost also need magnifying =
glasses
> to read it.  Is it really suppose to be like this?

Nope.  Funny, when WWW/LX 2 first came out I liked the folder section
GUI better than 1.1...  Matter of taste, I guess.  As for writing an
email - I thought you used Memo (the loooooong lines look like it
8-) ), so writing should depend on Memo settings.  If you're reading =
email
and the text is too small and in a little rectangle, hit Zoom
(Fn-Space) to change fonts.  I have Post/LX set up to include a
proportional font that's easier on my aging eyeballs.  I'm sending this
via Post/LX 2.2d with PE for the editor.

HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 07:08:31 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      A Garzotto's participation (was: PE/PIM possible new features)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

"Stephan Goeldi" <stephan.goeldi@datacomm.ch> wrote:

> >I see that Andreas answered to you on this. AFAIK he does not
> >post here publicly, nor reads the list anymore. BTW, I use
> >that format.
>
> <hysterical panic>
>
> WHY!!!
>
> </hysterical panic>

Well, he chose to spend his time more productively elswhere.
As you certainly know, there are some problems in the list
which contribute to this decision. I agree with him.

Some of the issues:

- religious, non-palmtop, and political posts
(an exception is a thread on usage of a program with
religious content, but the thread is great!)

- relatively empty posts - many words, almost no content

- "cute" spellings which wastes the time of those of us who
are not familiar with American English. It also seems to
diminish the level of discussion to kid-talk, or comic-talk.

- long signature lines. I now use one myself after too many
uncomfortable threads which soured my experience here.

These items increase the noise to content ratio.

Andreas had to spend money to download (lives where you do)
and time to read through messages with a high noise- to-
content ratio. The experience was disappointing.

It is therefore his preference that he utilizes his time in a
way that adds the best value. I agree with him, and I am sure
you and all the other people who get to use the fruit of his
great programming skills, agree too. Hanging out in the list
is not a good value for his time.

I continue to hang out here, although almost never formally.
I will pass along to him messages of particular interest. I
tend to read very rapidly (an old and rustly graduate of
Evelyn Wood speed reading course - would love to lay hands on
a program to refresh myself! :-) ...) and only stop on some
items, and so I can make quick scans. But frankly, sometimes,
my internal groaning is loud! :-(

I do not know if anything can be done to fix it. It really is
up to each of us who posts to choose what and how we post.
Most of the people who post here I like and feel a lot in
common with. So it is still interesting to me to read here.

As to your panic, well - sorry. I suggest taking several deep
breaths, and exhale slowly. This usually helps in panic
attacks :-)

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 09:15:34 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              KJH <kjhmdjd@IX.NETCOM.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         KJH <kjhmdjd@IX.NETCOM.COM>
Subject:      WHAT IS THE PURPOSE OF THIS LIST?
In-Reply-To:  <000301bf2ac3$80abdf40$c821b4d1@ed-01>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I'm not much of a contributor to this list - mostly a lurker.  And I know
that a very valid response to this would be:  if you don't like it,
unsubscribe.  But all the latest snipes on here about French "fascism",
resistance fighting, the metric system, how much of your chart your doctor
should read, etc., etc., etc. really has struck me that the signal:noise
ratio here has plummeted.  Even scanning headers won't work because many,
many off-topic posts seem to lurk under on-topic subject headers.

There are tens of thousands of newsgroups and mailing lists for other
topics.

If this list has really become a sort of chat club for "anything goes"
discussions by a nucleus of its members, then that's fine, and you all have
every right to do so, but it's not why I subscribed and I don't believe it
is the purpose of this list.

If I am incorrect, and the volume of off-topic postings is fine with
everyone else, you have my apologies and I will unsubscribe after posting a
thanks to those of you who have contributed to my better use of the 200LX.

Thank you for your time in reading this.

Kurt Hopfensperger

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 10:20:04 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Novosad <Novosad@SERVER030.FWB.SAIC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Novosad <Novosad@SERVER030.FWB.SAIC.COM>
Subject:      Re: WP 5.1 faxing
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

> Reinhard,

> > Not long ago someone mentioned that it is possible to fax with WP
> > 5.1. How do I do so? I cannot find any faxing options with my WP
> > installation.

> You need WP 5.1+ (5.1 plus).

> Regards

> Helmuth

I have faxed from WP 5.1.  The fax driver came with
my modem and installs as a printer driver in WP 5.1.
Printing to it creates whopping big graphic that is
then sent by a separate modem program.

Steve

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 08:07:51 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: WWW/LX PLUS a flop???
Comments: To: Lars Hedstroem <nxw988e@TNINET.SE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon, 15 Nov 1999 10:16:46 -0500 (EST)

06h56m03s ago ...
On Mon, 15 Nov 1999, Lars Hedstroem wrote:

> I am a www/lx 1.1 user,and as everybody praise www/lx plus I downloaded
> its demo to try it.  But I get 8 out of 10 times the message:"problem
> recieving data,cannot create file"when trying to open pages on internet.

Just thought of something else...  Since you're running the demo
version, it has a limit of IIRC 16K of data before it quits.  Maybe the
pages you're trying to access are larger.  If that's the problem, it'll
go away with the registered version.  Of course there are some
HV-hostile pages out there that are impossible (certainly not 80%,
though).


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 09:26:54 -0600
Reply-To:     jhope@enoinc.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "ENOINC - John S. Hope" <jhope@ENOINC.COM>
Subject:      Re: WHAT IS THE PURPOSE OF THIS LIST?
Comments: To: KJH <kjhmdjd@IX.NETCOM.COM>
In-Reply-To:  <000201bf2f7c$4364e880$ebbadccf@bigdog>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

You are very correct in your observations.  I've been lurking for a couple
of weeks and have found mostly worthless dribble or hardware engineers
talking about things I do not care to understand.

Should there be another list for just HPLX users?  That is, those who do not
develop hardware or software for the HP?

-----Original Message-----
From: HPLX Mailing List mailto:HPLX-L@UCONNVM.UConn.EduOn Behalf Of
KJH
Sent: Monday, November 15, 1999 9:16 AM
To: HPLX-L@UCONNVM.UConn.Edu
Subject: WHAT IS THE PURPOSE OF THIS LIST?


I'm not much of a contributor to this list - mostly a lurker.  And I know
that a very valid response to this would be:  if you don't like it,
unsubscribe.  But all the latest snipes on here about French "fascism",
resistance fighting, the metric system, how much of your chart your doctor
should read, etc., etc., etc. really has struck me that the signal:noise
ratio here has plummeted.  Even scanning headers won't work because many,
many off-topic posts seem to lurk under on-topic subject headers.

There are tens of thousands of newsgroups and mailing lists for other
topics.

If this list has really become a sort of chat club for "anything goes"
discussions by a nucleus of its members, then that's fine, and you all have
every right to do so, but it's not why I subscribed and I don't believe it
is the purpose of this list.

If I am incorrect, and the volume of off-topic postings is fine with
everyone else, you have my apologies and I will unsubscribe after posting a
thanks to those of you who have contributed to my better use of the 200LX.

Thank you for your time in reading this.

Kurt Hopfensperger

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 09:43:47 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: WHAT IS THE PURPOSE OF THIS LIST?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Mon, 15 Nov 1999 09:26:54 -0600, "ENOINC - John S. Hope" <jhope@enoinc.=
com> wrote:

> Should there be another list for just HPLX users?  That is, those who =
do not
> develop hardware or software for the HP?

And maybe there could be a list where the folks who complain about the =
list
don't quote the ENTIRE gripe message of the previous poster? Maybe if the
people who gripe about the content at least try to have some input =
instead
of being self-proclaimed "lurkers" there would be other discussions. I
certainly am not the most liked person on the list, but at least I do try =
to
offer some content every now and then.... geesh... <grrr>

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 09:59:01 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Subject:      Re: FS: acCIS v4.0 attn: Tom Hoover

Hi all (sorry for the broadcast to one person - lost the original post....
).

I understand "Tom Hoover" had acCIS v4.0 up for sale, is that still true?
and how much?

TIA

--tim

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 11:04:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      ADMIN: HPLX-L Problems
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon, 15 Nov 1999 10:50:48 -0500 (EST)

First, My apologies to the majority of you!

Second, If everyone, "Lurkers" included, would follow the simple rules
I set up, & practice some common courtesy this LIST(has and) will work
just fine.

   If you gotta gripe about the way things are running (or the way I
   run things), send it to me...NOT THE LIST...If I think it deserves
   "public comment"...I will forward it to the HPLX-L...I will do my
   best to respond to you.

Third, I don't have time "police" this LIST...Please follow the rules!

Cheers,

*Al Kind, Microchemistry Lab U-193, 3113 Horsebarn Rd
*Storrs CT 06269-4193 USA Tel/FAX (860)486-6126/6124

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:05:42 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      Re: WORD 5.5: File conversion from OFFICE 97
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

HP Staber/Salzburg wrote:

>I do not bother translating WINWORD doc's. You should be able
>to read them in WORD 5.5. The formatting garbage of header
>and footer info is at the beginning and at the end of the
>file. You can easily mark and delete that.

I used to do that before, but stopped because loading an
unconverted WORD 97 file with WORD 5.5 destroys the WORD97
formatting which I want to keep to be able to
continue to work on those files with WORD97.

Regards
Winfried

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 10:09:17 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tom Hoover <lists+hplx@HISWORD.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Hoover <lists+hplx@HISWORD.NET>
Organization: HisWord.net -- my own little speedbump on the Information
              SuperHighway
Subject:      Re: FS: acCIS v4.0 attn: Tom Hoover
In-Reply-To:  <199BBAE6DAABD2118CC90090272A7C4C310C55@n3cdoimmail140m.army.mil>; from RAYMONDT@HOOD-EMH3.ARMY.MIL on
              Mon, Nov 15, 1999 at 09:59:01AM -0600
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Responded offline.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 10:28:43 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Terry Owen <towen@QUINTREX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Terry Owen <towen@QUINTREX.COM>
Subject:      Defending the list (was Re: WHAT IS THE PURPOSE OF THIS LIST?)
MIME-Version: 1.0
Content-Type: text/plain

First let me say that I think that your complaints are somewhat valid;
HPLX is an extremely high volume list and the noise is occasionally off
the scale.

But if you have ever needed the expertise of the list regulars - it can
be worth every single off-topic post you've ever downloaded.  I've
personally benefitted so many times over - and just wish I could
contribute even a fraction of what I've received.

Today there are so many list options.  Perhaps there should be a low
volume list for the LX.  It takes about 10 minutes to start one at
Onelist.  So go for it! <g>

But I'm staying here until someone turns off the lights or kicks me out,

Terry


-----Original Message-----
From: "ENOINC - John S. Hope" <jhope@enoinc.com>
Subject:      Re: WHAT IS THE PURPOSE OF THIS LIST?

You are very correct in your observations.  I've been lurking for a
couple
of weeks and have found mostly worthless dribble or hardware engineers
talking about things I do not care to understand.

Should there be another list for just HPLX users?  That is, those who do
not
develop hardware or software for the HP?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 11:02:33 CST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              JEFF MACDOWELL <jmacd@USA.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         JEFF MACDOWELL <jmacd@USA.NET>
Subject:      unsubscribe
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

____________________________________________________________________
Get free email and a permanent address at http://www.amexmail.com/?A=3D1

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 11:45:33 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Subject:      Re: Errormessages
Comments: To: "thegeeman2@EARTHLINK.NET" <thegeeman2@EARTHLINK.NET>

Yep, I reported the same error number, but I don't think it was related to
WWW/LX, I forget how I got it AND it went away by itself!

--tim

re:
>Isn't this the same error reported by ?
>"Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
>RE: Error 65508?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 09:53:14 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: WHAT IS THE PURPOSE OF THIS LIST?
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Sniping is not the purpose of this list, and is against the common rules of
courtesy that should apply not only to this list, but to all decent and mature
people ... a point that Al's made clear already to others.

As a long time member on this list, I'll give my observation that the noise
level for different areas rise and fall, so be patient.

We've had lots of American Fluff, and lately the amount of International Fluff
has increased, and has been interesting (to me) with the exception of certain
ugly recent turns, which I hope will be tempered by the better judgement I know
we're all capable of.

My suggestion to those of you who find the list occasionally useful, but can't
tolerate the current noise level, is to turn off the mail temporarily until the
noise subsides.

>found mostly worthless dribble or hardware engineers
>talking about things I do not care to understand.

Those engineers were also responsible for the double-speed and megaram upgrades,
and they also patiently tolerated equally endless user discussions on Lotus
Agenda, InfoSelect, PE/PIM and other topics probably not of interest to them
either.

Above all, we stand ready to help members in need of getting an answer.

So if you have no questions to ask, nor answers to give, and if the discussion
is not to your liking, then you're probably not on the right list.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 12:59:09 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: WWW/LX PLUS a flop???
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Peniel wrote:

"Just thought of something else...  Since you're running the
demoversion, it has a limit of IIRC 16K of data before it quits.Maybe=
 the
pages you're trying to access are larger.  If that's the
problem, it'll
go away with the registered version."

I had this in mind therefore I tried only to download pages
which came up after a couple of searches on Alta Vista.
As you know there is written how big they are,and they I tried were=
 on about 8-12k.

(BTW.your two latest emails have come in to the list doubled)

About one year ago when I discussed this problem I got the advice from=
 the support to change my config.sys for the FILES=3D line from 30 to=
 40.The reason was that HV handles a lot of files.I did and it worked=
 atleast little better.

What you are suggesting now with Maxdos,is this a better solution than=
 only change in the config.sys file?I mean that I will be able to download=
 much bigger pages with Maxdos than without?

If yes,I find it very,very strange that the dasoftsupport never had=
 mentioned anything about this to me,cause this question I have had=
 up there many,many times.

And if I install Maxdos do I have to use PE then?As we have discussed=
 earlier you get problems with long lines when answering and I am not=
 sure I want that.

I also tried to press Fn+zoom in that rectangle you write in when composing=
 an email but nothing happened.I suppose this rectangle is possible=
 to expand,as they are in databases,cause otherwise you will write in=
 blindness not seeing the text more than one line.


Thanks for you help so far Peniel,you are always so helful even in "easy"=
 matters.


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 12:15:49 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: WWW/LX PLUS a flop???
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Mon, 15 Nov 1999 12:59:09 -0500, Lars Hedstroem <nxw988e@TNINET.SE> =
wrote:

> I also tried to press Fn+zoom in that rectangle you write in when =
composing
> an email but nothing happened.I suppose this rectangle is possible to
> expand,as they are in databases,cause otherwise you will write in
> blindness not seeing the text more than one line.

When you get to the rectangular box, you should be able to press enter =
and
have it start whatever editor you are using, be it PE, Memo or whatever.
This does sound like a memory issue to me also. MaxDOS is an awesome =
piece
of software and may very well help you solve you problem, especially if =
you
are trying to run WWW/LX from within the System Manager. Let us know what
happens when you install and run MaxDOS.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 19:44:07 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: WP 5.1 faxing
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Steve,

> I have faxed from WP 5.1.  The fax driver came with
> my modem and installs as a printer driver in WP 5.1.
> Printing to it creates whopping big graphic that is
> then sent by a separate modem program.

This did work from the hp200lx?! Great, could you go a little bit more
into detail.

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 13:48:19 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      Re: WWW/LX PLUS a flop???
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon, 15 Nov 1999 18:34:28 +0000 (GMT)

22m15s ago ...
On Mon, 15 Nov 1999 10:12:13 -0800 (PST), Lars Hedstroem wrote:

> I had this in mind therefore I tried only to download pages which came
> up after a couple of searches on Alta Vista. As you know there is
> written how big they are,and they I tried were on about 8-12k.

The unregistered limit is 16K of total bytes transferred from the login
stage.

> I also tried to press Fn+zoom in that rectangle you write in when
> composing an email but nothing happened.I suppose this rectangle is
> possible to expand,as they are in databases,cause otherwise you will
> write in blindness not seeing the text more than one line.

Did you press ENTER or F3 when you have that rectangle highlighted?
Then you editor should launch.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 11:35:32 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: WWW/LX PLUS a flop???
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon, 15 Nov 1999 13:34:36 -0500 (EST)

35m37s ago ...
On Mon, 15 Nov 1999, Lars Hedstroem wrote:

> I had this in mind therefore I tried only to download pages
> which came up after a couple of searches on Alta Vista.
> As you know there is written how big they are,and they I tried were on
> about 8-12k.

Hmmm - maybe that isn't the problem.  But I think the 16K limit
includes the login handshaking as well as the page size.

> (BTW.your two latest emails have come in to the list doubled)

Sorry about that.  Happens when I just hit "Reply".  Both your address
and the list address are automatically put in the "To" box.  You should
only get one of this.

> What you are suggesting now with Maxdos,is this a better solution than
> only change in the config.sys file?  I mean that I will be able to
> download much bigger pages with Maxdos than without?

MaxDOS swaps the System Manager environment to a large disk file or to
EMS.  It gives you a large DOS space.  If the problem is memory
related, it should help.

> And if I install Maxdos do I have to use PE then?  As we have discussed
> earlier you get problems with long lines when answering and I am not =
sure
> I want that.

You don't have to use PE, but it's a great editor.  You can install
any DOS editor you like.  Memo won't work in a MaxDOS session because
the System Manager is swapped out.  The long line problem only
happens when responding to messages composed in Memo.  No problem
otherwise.

> I also tried to press Fn+zoom in that rectangle you write in when
> composing an email but nothing happened.I suppose this rectangle is
> possible to expand,as they are in databases,cause otherwise you will
> write in blindness not seeing the text more than one line.

OK - I misunderstood about the little rectangle.  As Jeff said, just
hit Enter when the highlight is there, and you start your editor.  I
thought your problem was trying to read with the tiny 6x8 font.


Regards,

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 11:33:40 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      Fluff: About fluff on this list: can we stop being bothered?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

A long message to tell us what we already know: the list is full of more or less
relevant messages.

Face it: any mailing list will go to different stages of relevance during any
given year. Some people want not only technically-related communications, but
human ones as well -- and they want to do it with people they feel they relate
to. A technical mailing-list can be a group of such people.

Email programs are great tools to limit the noise of any given mailing list.

Some people are *very* touchy about spikes in noise in a mailing list and often
feel the need to add to the noise by asking everyone to quiet down or end up
going into hiding. It only works temporarily. Get over it.

Philippe


----- Original Message -----
From: A Meshar <sponsor@FTEL.NET>
> Well, he chose to spend his time more productively elswhere.
> As you certainly know, there are some problems in the list
> which contribute to this decision. I agree with him.
>
> Some of the issues:
>
> - religious, non-palmtop, and political posts
> (an exception is a thread on usage of a program with
> religious content, but the thread is great!)

<snip mild rants/comments about usefulness/relevance of list messages>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 13:29:06 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      LX Games Page
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----_=_NextPart_001_01BF2F9F.AE91C01A"

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01BF2F9F.AE91C01A
Content-Type: text/plain;
        charset="iso-8859-1"

Could the person who maintains the LX Games page (I think it's Mike),
please send me the URL off list? You recently posted the URL, but I
accidentally lost that message.

Thanks,
Steve


------_=_NextPart_001_01BF2F9F.AE91C01A
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12">
<TITLE>LX Games Page</TITLE>
</HEAD>
<BODY>

<P><FONT FACE=3D"Arial">Could the person who maintains the LX Games =
page (I think it's Mike), please send me the URL off list? You recently =
posted the URL, but I accidentally lost that message.</FONT></P>

<P><FONT FACE=3D"Arial">Thanks,</FONT>
<BR><FONT FACE=3D"Arial">Steve</FONT>
</P>

</BODY>
</HTML>
------_=_NextPart_001_01BF2F9F.AE91C01A--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 15:04:35 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ron Griffith <rrg@MINDSPRING.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ron Griffith <rrg@MINDSPRING.COM>
Subject:      Fwd: Quicken ??s
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

--- begin of forwarded message ---

Subscriber Comments: i would like to use pocket quicken on the 200lx,
what version of quicken can i use it with and still be able to
syncronize the register.

your help is appreciated

ron g

--- end of forwarded message ---
*Al Kind, Tech Lab Manager            _   __   _        __
*Microchemistry Lab U-193   ___ _    (_) / /__(_)__ ___/ /
*3113 Horsebarn Rd         / _ `/   / / /  '_/ / _ Y _  /
*Storrs CT 06269-4193 USA  \_,_(_)_/ (_)_/\_Y_/_//_|_,_/
*Tel/FAX (860)486-6126/6124     |___/        Team 200LX

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 13:15:17 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Batson, Dale N" <dale.n.batson@LMCO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Batson, Dale N" <dale.n.batson@LMCO.COM>
Subject:      Problems Modifying Database Fields
MIME-version: 1.0
Content-type: text/plain
Content-transfer-encoding: 7BIT

Hi friends,

I wanted to change the FAX field in my phonebook database to a CELL field.
So, I first made a backup copy of phone.pdb, then loaded the original
phone.pdb into the database application. I selected "Modify Database", then
went to the FAX field and changed the label to "Cell", then pressed "Done".
I noticed that the DataCard's field did not reflect this change, and I
couldn't figure out how to edit it. Then when I tried to open the modified
database with PhoneBook, I got the message: "Error Cannot open file". I then
overwrote the newer database file with my backup copy, but I got the same
error message. I ran Curtis Cameron's latest dbcheck program against the
original file but it didn't find anything wrong with the file. Somehow -
sorry, I can't remember exactly what I did - I eventually got both the
Database and the PhoneBook applications to successfully open the original
file.

What is going on here that prevents these database programs from loading
seemingly sound database files? And how can you modify the DataCard's
fields?

I'd certainly appreciate any help I can get on these matters.

Thanks,
Dale Batson

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 21:11:03 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: STOPMAIL
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Lies mal die Zeile unter Deiner Unterschrift ...

-goe-


-----Original Message-----
From: Karlheinz Juenemann <Karlheinz_Juenemann@MAGICVILLAGE.DE>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Montag, 15. November 1999 01:00
Subject: STOPMAIL


>Hello,
>I tried to cancel my subscribtion to the list several ways without success.
>Can any body tell me how it works?
>
>KJ
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 21:12:34 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Fluff: Being nice... and non-fluff too
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

First the fluff (non-fluff follows)

>In today's world I think that no country or group of people, ethnic or
>otherwise, can safely say that they or their forefathers have a clean
>warrant. We all have blood on our hands.

Non-fluff:

This is a semi-LX-story:
For an exposition about a special kind of 'resistance' against the Hitler
regime I was responsible for the ressort media. The exposition's name was
'Forgotten Victims'. My work was to organize a press meeting and to inform
the local newspapers and radio stations. The exposition was about people in
Germany who didn't greet "Heil Hitler" and ended up in the KZ's (Nazi
camps). I spoke with an old jewish man who had a number tatooed on his arm
from Auschwitz. He came into the KZ, because he was a Jew. In the KZ he saw,
that there was another KZ inside of the KZ. Those people not greeting "Heil
Hitler" were there, because they didn't go to the war, didn't work in the
war industry and didn't go to the elections. It was not allowed to speak
with them. He later became one of them inside of the KZ.

I organized this press meeting with my LX. It was not an easy work, because
a lot of people don't feel responsible about this story.

What you said: "We all have blood on our hands" is not true, after I learned
the story of these peoples. They died, because they didn't want to get blood
on their hands.

A lot of people don't want to accept them as victims, especially because
they were Jehovah's Witnesses.

I used my LX with Project (PJT) and the ApptBook for the press meeting and
the press releases during the exposition. It was a success.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 21:12:55 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: WHAT IS THE PURPOSE OF THIS LIST?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Well that's not correct. Hardware questions are legitim on-topic subjects.
If you some day ask the question "Which mobile phone will work with my LX?"
the answer will come from those guys!

-goe-

-----Original Message-----
From: ENOINC - John S. Hope <jhope@ENOINC.COM>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Montag, 15. November 1999 16:31
Subject: Re: WHAT IS THE PURPOSE OF THIS LIST?


>You are very correct in your observations.  I've been lurking for a couple
>of weeks and have found mostly worthless dribble or hardware engineers
>talking about things I do not care to understand.
>
>Should there be another list for just HPLX users?  That is, those who do
not
>develop hardware or software for the HP?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 14:35:25 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      S.U.P.E.R. Update
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

The S.U.P.E.R. site has been updated again with a few goodies. The link =
to
Daniel's LXTeX web page is not working <argh> but I figured that I would =
go
ahead and let everyone know about the update. Hopefully, the LXTeX link =
will
be fixed within a day (sorry Daniel....). I particularly like the Mortgage
Calculator. There are a couple of other programs written by Jean-Jacques
Moreau that come complete with source code. The more I fool with all =
these
different forms of software, the more I realize the need for source code =
to
be included with freeware.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 15:36:46 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: WWW/LX PLUS a flop???
Comments: To: nospam@UNDECIMUS.FREESERVE.CO.UK
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tony wrote:

"The unregistered limit is 16K of total bytes transferred from
the login stage."

But can the program "feel" how big a page is before it opens it?


"Did you press ENTER or F3 when you have that rectangle
highlighted?
Then you editor should launch."


It was a memory issue as you can read in my mail to Jeff.

Thanks

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 15:36:50 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: WWW/LX PLUS a flop???
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Jeff wrote:


"When you get to the rectangular box, you should be able to
press enter and have it start whatever editor you are using, be it PE,=
 Memo or whatever.
This does sound like a memory issue to me also."

Yes,I forgot to mention this before to Peniel,that when I press enter=
 in the rectangularbox I get the errormessage:out of memory.

Anyhow I found what was wrong,thanks to you,it was a memory issue.I=
 tried to run it without closing the system manager,when I did it worked=
 and launched memo fine.
And I was somewhat surprised that this post/lx goes faster than
the reader.exe  in my www/lx 1.1!When I for example press enter to read=
 an email in this new version the whole text shows up emmediately!That=
 takes some time in reader.exe


"MaxDOS is an awesome piece of software"

I didn't know what this word "awesome" mean  so I looked in my dictionary=
 and found two meanings,one is horrible and I guess it is this you mean?Max=
Dos=3Dhorrible according to Jeff?


" and may very well help you solve you problem,
especially if you are trying to run WWW/LX from within the System Manager."=


With within System manager I take it you mean I run the program with=
 an installed icon?Actually I haven't yet understood the difference=
 between the Application manager and the System manager.The HP 200LX=
 User's Guide isn't much help in this case either.As far as I understand=
 it is the same thing?


" Let us know what happens when you install and run MaxDOS."


Well I haven't even downloaded MaxDos from SUPER but if you will help=
 me even later I would be thankful.


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 14:54:34 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: WWW/LX PLUS a flop???
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Mon, 15 Nov 1999 15:36:50 -0500, Lars Hedstroem <nxw988e@TNINET.SE> =
wrote:

> Anyhow I found what was wrong,thanks to you,it was a memory issue.

Don't feel bad, I think we have all been down that road once or twice. I =
can
not make the latest version of PE run in conjunction with WWW/LX due to
memory constraints.

> I didn't know what this word "awesome" mean  so I looked in my
> dictionary and found two meanings,one is horrible and I guess it is =
this
> you mean?MaxDos=3Dhorrible according to Jeff?

No, the opposite. I mean that MaxDOS is an excellent piece of software =
that
I couldn't live without. Here in the states, we tend to assume that folks
know what we mean, in this case it backfired on mean <grin>.

> With within System manager I take it you mean I run the program with an
> installed icon? Actually I haven't yet understood the difference =
between
> the Application manager and the System manager.The HP 200LX User's =
Guide
> isn't much help in this case either
> As far as I understand it is the same thing?

It is, it should properly be called the Application Manager.

> Well I haven't even downloaded MaxDos from SUPER but if you will
> help me even later I would be thankful.

I would be more than happy to help.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 13:05:42 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              neill <neill@KEYWAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         neill <neill@KEYWAY.NET>
Subject:      Re: Unsubscribe + WorldWar3
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Just a minor point of idiomatic grammar, but the correct "Queens English"
spelling, is "arsehole." The very best(ie, most deserving) recipient of the
epithet gets the salutation......"You flaming a!s@h%l* "

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 15:24:59 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      Re: Problems Modifying Database Fields
In-Reply-To:  <955DBB91136BD311A9AE0000F8081F0363948B@emss02m02.ems.lmco.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 15 Nov 1999, Batson, Dale N wrote:

> What is going on here that prevents these database programs from loading
> seemingly sound database files? And how can you modify the DataCard's
> fields?

To modify the DataCard fields you need to have the PhoneBook open
and press F5 (Clip) then Alt-E (edit).

The failure to open a database might be an extension conflict.
For example, if you changed the extension of phone.pdb to .gdb
while editing, I believe you'll have to change it back to the
original .pdb before PhoneBook will open it.

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 16:45:33 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: WORD 5.5: File conversion from OFFICE 97
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Winfried,

> I used to do that before, but stopped because loading an
> unconverted WORD 97 file with WORD 5.5 destroys the WORD97
> formatting which I want to keep to be able to
> continue to work on those files with WORD97.

If you want to eat pancakes then you have to break eggs (I think) ;-)

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 16:45:31 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      POST/LX on desktop
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

A recent problem with my palmtop forced me to install POST/LX 2+ on my laptop.

I use MaxDOS and PALRUN to call POST/LX in a WIN95 DOS box with >500kB lower
memory availlable. In POST/LX this memory is ~140kB. I have two problems :

1) PE does not want to start when I want to compose messages (not enough
memory)

2) I can't go online as the modem is not identified. WIN95 tells me that it is
at COM2 and I have no problems running IE5 through this modem at COM2, 8N1 and
38200baud with AT&F as init string (I might try AT&FX3). However these settings
in POST/LX don't work as I don't even get to initializing the modem.

Anybody using POST/LX on their desktop out there ?

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 16:48:09 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Cgldent@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Colin Lambert <Cgldent@AOL.COM>
Subject:      Re: Quicken ??s
Comments: To: rrg@mindspring.com
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

I use Quicken v6 and it imports pocket Quicken files fine.
Cheers
CL

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 15:00:40 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      SysMgr and AppMgr (Was Re: WWW/LX PLUS a flop??)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon, 15 Nov 1999 17:05:46 -0500 (EST)

01h29m09s ago ...
On Mon, 15 Nov 1999, Lars Hedstroem wrote:

> Actually I haven't yet understood the difference
> between the Application manager and the System manager.The HP 200LX
> User's Guide isn't much help in this case either
> As far as I understand it is the same thing?

Hi again, Lars -

Not exactly.  The System Manager is the task-switching TSR that's
loaded by the 200 line in autoexec.bat   The Application Manager is the
program launcher that starts from the &... More blue key.  SysMgr can
work without AppMgr, but not the reverse.  X-Finder or SMMx can be used
as alternate application managers, but that's a different topic...


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 16:18:51 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              KJH <kjhmdjd@IX.NETCOM.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         KJH <kjhmdjd@IX.NETCOM.COM>
Subject:      Thanks and goodbye!
In-Reply-To:  <HPLX-L%99111513440481@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

As the poster of one of the recent "gripe" messages, I just wanted to say
that I disagree that we who (usually) follow the list charter and keep our
postings on-topic should patiently tolerate the "rise and fall" of the
volume of irrelevant messages.

I apologize to the list for my post of earlier today for wasting the
members' time.  But if the list administrator himself admits he cannot
police its contents, and the list charter is ignored continuously by some of
its members, what recourse do the others have?

Thanks to those of you who in my time here (2 years or so, I think) have
provided me with such useful tips and advice about how to better use my
200LX.

I will now unsubscribe (  through the list info site, not here :-) )

Carry on with the best handheld yet made!

Kurt Hopfensperger

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 22:18:35 -0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laurence Harvey <lharvey@CALLNETUK.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laurence Harvey <lharvey@CALLNETUK.COM>
Subject:      Re: Problems Modifying Database Fields
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Dale

You wrote:
>What is going on here that prevents these database programs from loading
>seemingly sound database files?
A cannot see what you are doing wrong here, I've tried it and it works. The
only thing I can imagine has happened is that when you open the PhoneBook
after the modifications, you had either moved or renamed the last file it
had opened, so that it cannot open it (PhoneBook always loads the last file
it had open). Have you tried doing a File-Open and selecting the modified
file you want from the pick list?

>And how can you modify the DataCard's fields?
The DataCard layout is controlled by a SmartClip. To modify it, press F5 in
Phonebook, select DataCard and ALT-E (Edit)

Laurence

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 16:46:29 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      IRC/LX
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Is there any chance that there would be future versions of IRC/LX that =
would
support the /window command where you could have more than one window on =
the
screen? Also, would there be any support for the /alias command?

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:52:38 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: IRC/LX Announcement
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Thanks Jeff, sounds like CB for the pc.  I'll give it a try.
Russ

> On Sun, 14 Nov 1999 21:28:57 -0500, Russel Brooks <rlbrooks@POBOX.COM>
> wrote:
>
> > What *is* IRC ??  Why would I be interested in it?  What do you do
> > with it or use it for?
>
> IRC is an ancronym for Internet Relay Chat. By logging onto one of the
> various chat networks, you can chat in real time with others from all
...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 18:11:53 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Fluff: Solutions to the fluff problem
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

There are a couple of solutions for people who would like to
continue an off-topic conversation. The first is to take it
to the fireside newsgroup on news.hplx.net - it's just
sitting there, crying out to be used!

The second is to reply just to the person who sent the
message, rather than subject the entire list to the
occasionally bizarre nonsense (along with the more "normal"
fluff) that some people seem capable of coming up with!
:-)

Personally, I enjoy reading the fluff - some of it is
excellent for a laugh! It just doesn't need to be on this
list, however. Sorry for adding to the noise.

 -Mike http://games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 18:31:35 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      Re: WWW/LX PLUS demo
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon, 15 Nov 1999 23:15:58 +0000 (GMT)

02h25m ago ...
On Mon, 15 Nov 1999 12:50:58 -0800 (PST), Lars Hedstroem wrote:

> Tony wrote:
>
> "The unregistered limit is 16K of total bytes transferred from
> the login stage."
>
> But can the program "feel" how big a page is before it opens it?

No, but if I recall correctly you said you had already gone to altavista
and searched and all that would have probably used up the 16K.

Tony

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 19:50:30 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: POST/LX on desktop
Comments: To: hpstaber@COMPUSERVE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> A recent problem with my palmtop forced me to install POST/LX 2+ on my laptop.

I tried running WWWLX on my 486 DOS 5 desktop and kept having all kinds
of problems.  When I reported the problems I was told WWWLX was specific
to the 100/200LX and there wasn't any support for desktops.  If it ran I
was lucky, if it didn't I was out of luck.

Cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 19:50:33 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Thanks and goodbye!
Comments: To: KJH <kjhmdjd@IX.NETCOM.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> As the poster of one of the recent "gripe" messages, I just wanted to say
> that I disagree that we who (usually) follow the list charter and keep our
> postings on-topic should patiently tolerate the "rise and fall" of the
> volume of irrelevant messages.
>
> I apologize to the list for my post of earlier today for wasting the
> members' time.  But if the list administrator himself admits he cannot
> police its contents, and the list charter is ignored continuously by some of
> its members, what recourse do the others have?
>
> Thanks to those of you who in my time here (2 years or so, I think) have
> provided me with such useful tips and advice about how to better use my
> 200LX.
>
> I will now unsubscribe (  through the list info site, not here :-) )
>
> Carry on with the best handheld yet made!
>
> Kurt Hopfensperger
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:28:57 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Michael Minnick <razzoid@YAHOO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Michael Minnick <razzoid@YAHOO.COM>
Subject:      Hi (again) and Modem (again) :-)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

I don't know if anybody saw my message about the
external modem.  It is 56k uses a serial port and is
supposed to be universally compliant with almos all
systems.  It runs off of a 9 volt battery or 2 AA's
(I'm not sure which).  It weighs about 3 oz. with
batteries.  For more information go to:
http://ppc.trogoncomputer.com/products/unimicro/index.html
.

I'm not associated with this company nor do I have the
modem (It isn't even out yet).

Yoda,
May The Force Be With You

=====

__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:38:43 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Fluff: Re: Unsubscribe + WorldWar3
Comments: To: Reinhard Mueller <molitor@01019FREENET.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Now I fear that a lot of people are going to believe that they
> finally found the word they have to put in the subject line for
> unsubscribing from the list.

You mean I have really to put that word in the subject to get
out of the list? :-)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:38:38 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Post/lx and downloading headers was:Re: Unsubscribe +
              WorldWar3
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Andreas if you are listning (or Avi) could you maybe have this in the
> menu so we don'nt have to shell to dos to do this?

You can undelete messages, including HEADERS, and then redo
the action you wish. The undelete is in the Edit Menu.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:38:31 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: WWW/LX PLUS a flop???
Comments: To: nospam@UNDECIMUS.FREESERVE.CO.UK
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> But can the program "feel" how big a page is before it opens it?

No. But when the program "feels" that the count of bytes
reached 16K, it cuts off communications. It counts ALL the
bytes transmitted: Handshake, Altavista inquiry, EVERYTHING -
even what your machine sends out - it sums EVERYTHING UP and
when it reaches 16K, it cuts off communication.

Let me make it easier for you, in case you are going to ask to
change the limit :-) then no, sorry. We cannot do this.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:38:36 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: WWW/LX PLUS a flop???
Comments: To: Lars Hedstroem <nxw988e@TNINET.SE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Lars,

>  the text is by some idiotic reason still in this little rectangle which
>  give not only  a very bad overview,you almost also need magnifying
>  glasses to read it.Is it really suppose to be like this?

The idiotic (your words) reason for the little window is that
when you press Enter while highlighting it, Post/LX will start
the editor you specified. If you do not see this happen, then
it is probably because you ran out of memory.

Jeff gave you some hints on how to solve this.

This version works VERY differently from the version you have
and comparisons are hard to draw, at best. These are two
different programs.

Enjoy!

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:38:41 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: HV fonts - missing characters
Comments: To: Peniel Romanelli <peniel@web2000.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Peniel,

> > Good question. Check and see what is the ASCII value of the
> > &nbsp; for example, and insert a desired character in that
> > slot using PFE. As you correctly observed, this is a font
> > question, not HV. I can help with HV a bit, but not much with
> > PFE, sorry, I have problems using it myself :-) ....
>
> Hi Avi -
>
> Hmmm - there seems to be one problem with that.  The web uses the ISO
> Latin 1 character set, and the .hfn fonts seem to use codepage 850
> Multilingual (Latin I).  The codes above 127 are different, and I guess
> HV translates the Latin 1 codes into CP850 codes to use the fonts.
> Looking in my 200LX manual, I see that the palmtop's CP850 doesn't have
> the "typographer's quotes" at all...  Strangely, EVP (a desktop
> publishing program I use on the palmtop) also uses CP850, and it does
> have the missing characters.  The quotes are 177 and 178 in EVP (147
> and 148 in Latin 1).  Any ideas?    Thanks.

No ideas, sorry.

> BTW - what version of PFE do you have?  I had problems with V1 but a
> later one (v1.2 - I think) works fine.

I have PFE 1.02.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 17:38:28 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: IRC/LX
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Is there any chance that there would be future versions of IRC/LX that
> would
> support the /window command where you could have more than one window on
> the
> screen? Also, would there be any support for the /alias command?

Are you using IRC/LX? Any development would be predicated on
usage. The more, the better.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:51:21 +1030
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Collins, Barry (FORENSIC)" <collins.barry@SAUGOV.SA.GOV.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Collins, Barry (FORENSIC)" <collins.barry@SAUGOV.SA.GOV.AU>
Subject:      UNSUBSCRIBE
Comments: To: MCHEM1@UCONNVM.UCONN.EDU
MIME-version: 1.0
Content-type: text/plain

Hello Al,

In the midst of all this fluff controversy I have to once again ask you to
manually unsubscribe me from my (now) old e-mail address.

As happened before, the whole government e-mail system had been reorganised
with new user names and domain addresses, etc. and I have found out after
the change was effected.  To maintain some continuity, the old system is
functioning  to forward incoming mail to the new, but not in the other
direction.  I have had to resubscribe under my new address but cannot
automatically unsubscribe my old address <collib@forensic.sa.gov.au>.

Between you and me and various others here, the new address system seems
more cumbersome, but as I have been given the privilege of a listing in the
government system (while technically a part-time volunteer), I am in no
position to complain!

Barry Collins
<collib@forensic.sa.gov.au>
<collins.barry@saugov.sa.gov.au>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 09:28:55 +0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rachmat Irfan <irfan@KSEI.CO.ID>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rachmat Irfan <irfan@KSEI.CO.ID>
Subject:      Palmlink future version
MIME-Version: 1.0
Content-Type: text/plain

Dear all,
I wonder if the newest version of Palmlink has available in S.U.P.E.R
sites ?
The author has promising in the next version Palmlink will be able to
send/receive mail without using eudora.
I thought that will be very interesting, increasing 200lx ability in
mailing function.


BTW : Does anybody have tried using LXMNC ?


Thank you
Best regards to all...
Irfan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 9 Nov 1999 22:21:34 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Kawaratani <bobk@GOL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Kawaratani <bobk@GOL.COM>
Subject:      Re: How quickly they forget...
Comments: To: Ken Hansen <khansen@NJCC.COM>
Mime-version: 1.0
Content-type: text/plain; charset="US-ASCII"
Content-transfer-encoding: 7bit

> But this weight includes a headset - the 95/100/200 LX does not...
>
> Ken
> khansen@njcc.com
>

The HP200lx doesn't need the headset, it has a display built-in. The headset
includes the display device.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 21:14:06 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: IRC/LX Announcement
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Mon, 15 Nov 1999 17:52:38 -0500, Russel Brooks <rlbrooks@POBOX.COM> =
wrote:

> Thanks Jeff, sounds like CB for the pc.  I'll give it a try.

Being a amateur radio operator I prefer to think of it as RTTY for the PC
<g>. Actually I use my LX for a form of IRC which is on HF and chat in =
real
time with folks all over thoe world.

73 de Jeff W4JEF

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 21:14:08 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: IRC/LX
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Mon, 15 Nov 1999 17:38:28 -0800, A Meshar <sponsor@FTEL.NET> wrote:

> Are you using IRC/LX? Any development would be predicated on
> usage. The more, the better.

The short answer is that I have used it a little. It is kind of hard to =
get
used to,especially being an ircII user. Although it is somewhat similar, =
it
is different. It is quite frustrating to be on two channels at the same
time. On ircII, it's quite easy to swap between all the active windows =
and
to resize them. Also, there is a plethora of available scripts for ircII =
and
since ircII is basically a DOS port that uses WWW/LX it would be nice to =
be
able to use some of these scripts. One of the most popular scripts for =
ircII
is the one that binds the <TAB> key so when you press it, it automatically
msgs the last person that sent you a /msg I'm still trying to figure out
some of the different key assignments of IRC/LX. I haven't had a lot of =
time
since I discovered that it was available to play with it. Does the
registered version preface the user's domain name with WWW_LX? The docs,
IMHO, leave a lot to be desired about the program and if someone isn't =
very
familiar with IRC with a client such as ircII they will probably end up
being very frustrated. Honestly, if improvements such as multiple, =
resizable
windows will not be a future option, along with the ability to write =
scripts
for the client are not implemented, I would be hard pressed to spend $25 =
for
it. This is just my opinion and other users may have other ideas and
opinions. There is a program called VIPER that performs basically all of =
the
same functions of IRC/LX but uses the WATTCP stack. The author never
finished the software and never finished the /dcc portion of it. It is
available at http://www.agate.net/~tvdog IIRC. It's a shame the author is
unreachable and that the source wasn't included with the beta release.
Anyways, those are my thoughts and ideas.....

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 14:20:33 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "KAZU(Kazuhisa Ta" <QWQ11433@NIFTY.NE.JP>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "KAZU(Kazuhisa Ta" <QWQ11433@NIFTY.NE.JP>
Subject:      Morphyone english info=?ISO-2022-JP?B?GyRCI3IbKEI=?=mation.
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-2022-jp

Hi folks!
English information about the Morphyone are released.
See this URL.
http://member.nifty.ne.jp/toyozou/palmpc/release_English.html
Bye.

P.S. Now I'm in Chicago.
------------------------------------
      KAZU (Kazuhisa Tanabe)
 Kyoto, Japan
 E-mail     QWQ11433@nifty.ne.jp
------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 15 Nov 1999 23:34:27 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: IRC/LX
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Jeff,

Thanks for your thoughts on IRC/LX.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 09:47:10 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Re: Errormessages
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Error 65508?

Not enough memory!
Use maxdos, remove TSR or exit sysmgr.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 09:26:34 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      Filer backup
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

q1: when instructing backup in Filer to back up all files _and_ directories,
it ony copies files in the current directory, but no files in the tree
directories?
q2: when starting a dos session (ctrl+123 or filer+options+dos) i get a C:\
but the lx locks up and doesn't even shut off; only a ctrl+alt+del fixes it
(until i run the next dos session; i have learned to save everything since)

anyone has met (and solved) those problems?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 09:31:42 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      A Garzotto's participation
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

i am happy with his quick-lx program saving me many key-strokes every day
 3 keys to just type one French "e") (i bought my lx in Wisconsin)

i understand that Andreas has no time (interest?) for certain fluff noise,
so,
may i suggest for everyone starting fluff to add a line saying "please reply
to non-lx related fluff privately" - that would solve the problem (and maybe
get Andreas back in)

when i make a fluff comment i get most interesting answers privately (re.
French resistance, feminism, sex etc); only a few list members think they
can impress the rest with their macho intelligence by replying on the list -
it backfires and Andreas in heaven weeps

no more signature file from me either

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 04:27:23 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      I confess FLUFFING
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hello

Some words from a "Fluffer"

I know that I am one of them who  have been quite fluffy and
I take these remarks about too much fluff personally.

I have not followed the rule about writing FLUFF in the subjectfield,but=
 I did in the beginning of my "career" here on the mailinglist,but soon=
 I noticed that people didn't care about this rule so I also stopped=
 to follow it.

So to all you other fluffers out there,let us follow this rule
about writing FLUFF in the subject field.

This will effectively stop the the angry critisism from anti-fluffers,as=
 they are unsubscribers from  all our (enjoyable) FLUFF-emails,and the=
 list will work much better.

Ofcourse if we write an email which consists to 80-90% of HPLX facts=
 and one fluffsentence there is no need for neither critisism nor separate=
 emails according to my opinion.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 01:53:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: WWW/LX access using calling cards

>From: Anand Rao <slim1005@HK.SUPER.NET>
>Date: Monday, 15 November, 1999 02:28
>I recently installed a registered version of WWW/LX in the midst of a long
>overseas trip. The roaming access feature (using IPASS) of my ISP did not work
>very smoothly and I presume it is due to some glitch at the ISP's end which I
>will investigate now that I am back home.

>I had to call my ISP in Hong Kong via IDD which I did as I had to get to those
>messages. However, I could not use my AT&T calling card to establish the

Was your modem disconnecting after "Thank you for using AT&T Worldsomething...
Some modems do not appreciate "conversation" :<)

>connection. The WWWSETUP program could take in the long string, but the

On average the number of characters you are able to input in the field
is 1.5 times the viewable field
Variable depends on Windows or the DOS comm package used
The 35 to 50 character string depending which program is used
Although you could on some program insert 256 characters

>connection could not be established. I could only hear the voice prompts on the
>speaker. I tried inserting various lengths of pauses using commas but it did
>not work. Any suggestions?

This where a visit to the local "Public Phone Center" with an (or many) attendant
and an acoustic coupler comes in handy
And after the learning curve, purchase a "local" prepaid calling card
and use a telephone booth in a relatively secure area

>The only option was to use the hotel phones, at the AT&T operator assisted
>rates plus a 35% markup. The $89 I paid for WWW/LX was peanuts compared to what
>the hotels ended up making on the phone calls.

>Many thanks
>Anand Rao.

>       <Unsupported text or character set removed>
AAHHHH yes ! the "famous" html tags that people like to attach
John 8:32 End.of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:02:33 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      hp200lx hardware site?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

What is the addres to the HP hardware compatibility site.
I remember there was a site that collected info on compatible gadgets.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:02:36 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Reposting msg that did not get ANY feedback - sorry!
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I am reposting some messages that I have posted before but did not get =
any
feedback.
Sorry - will not send them again.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:02:35 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Tech:The new www/lx.
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Could someone explain what this mean? What happends tecnicaly, when =
timeout is
reduced? And when does a "TCP retry" appear?

(from the www/lx newfeat.htm)
* Reduced timeout for ethernet so that the "pauses" that sometimes
appeared should be reduced.

* The time before the first TCP retry happens is reduced from 4 to
2 seconds and now settable using RetryTime=3Dn in the corresponding
setup section.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:02:24 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Alarm and MaxDos
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

How does one do to get the alarm to go sound  even if one is in MaxDos?

This is a part of my autoexec:
c:\sound\snd\playex
c:\system\maxd03b\maxdos -L -E25 -Wc:\temp -AC:\_dat\alarm.snd


playex -l just angs my HP.
Am I missing something?

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:02:31 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Remote connection with Filer and a modem?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I was trying to get a remote connection to a PC runing HP conectivity
pack via a modem.

I have entered the PC's phone number in Filers remote setting.
I call the remote PC via a pcmcia modem in the hp. The remote PC
answers and You hear the negotiating going on. ( I have tried with
datacomm and that worked OK. There was a connection with win95 hyper
terminal).
There is a brief flash on the remote PC, but its so fast I can not read
it. And on the hp the message that tells me to wait for a connection
disapears

Anybody tried this, and can give me a hint?

I have set 2400bps and server enabled.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:02:28 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Socket EA+ network pcmcia card (was:FAQ updates)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> On Tue, 5 Oct 1999, Blah...Just Blah.. wrote:
>
> > i've used the ea card and now use the lp-e card from socket.  I =
bought
> > the ea at a computer fair and the lp-e at fry's (~$130 new).
>
> Are those the model numbers?  (i.e., "Socket LP-E and Socket EA" for =
the
> FAQ?)

Have anybody gotten Socket EA+ to work with the hp?
I have one but:
lxcic /L
lxen2216 0x66
does not get it to work as I would like.
It initializes ok, but it does not transmit/reicives as I whant.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:02:30 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Re: WWW/LX and delivery notification.
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

>> Add this header to your message
>
> Return-Receipt-To: ..your email address

There is also the option of adding

* X-priority
* Importance
* Sensitivity

What are they. And what can one write in those fields?

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 10:15:41 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Unsubscribe + WorldWar3
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Herr Schittke, Lars,

> This is the actual "Arschloch" from sweden answering.
> Yes,I agree with you.My first spinal cord reaction was to apologize
>  for my joke about Germany and WW3,and so I did in an email.But later
>  I regret that I did this as Scittke actually called me an asshole.Therefor
> e prof Schittke,I take back my apology I gave you.(ofcourse not for
>  other Germans on the list)

please don't begin a long discussion here about this topic. We all know
the things happened in Germany more than half a century ago, and if you want to
discuss them, please do it in private email.

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:24:28 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Post/lx and downloading headers
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 15 Nov 1999 06:24:05 -0800, Undetermined origin c/o LISTSERV
administrator <owner-LISTSERV@UCONNVM.UCONN.EDU> wrote:

Almost all messages you post have Tomas Moberg as the sender, but some
of them have the above as sender why? Do you send the messages to the
list.hplx at the newsserver or to the mailaddress hplx list?

Tomas Moberg wrote:

> That sounds great,man!!!!

Yes I am looking forward to use www/lx "headers only" option more when
I get my Nokia cellphone to work with the hplx.. The headers only
option is great when you only want specific mails downloaded.

> Is this also valid for WWW/LX 1.1?Cause I have not the Plusversion.

I do not know. I have only tested the 2.2 version.. Somebody else have
to answer this one. I have not even seen the gui of the last version.
So I really can't say if this works or not.

Why don'nt you just get a license on the new version. I sdo not regret
that I bought the license. I use my hp/www/lx for all mail and news.

Today I had to use my desktop for mail and it was a real drag. I hated
it. I did'nt like to be tied up in front of the machine until I was
finished..

I was not aware that I had grown so attached to the hplx www/lx combo
until I used the desktop today.

> BTW,will you look at EM in football?I hope for Norways sake that you
>won't meet Sweden to early in the competition and get knocked-out:-))

No I will not.. I am not interested in football at all..so I do not
care if we win or lose..under the influence of alcohol I can work up
some interest though :-))..but I usually gets real drunk when I
try to get a interest for football :-))

> Yes somewhere among my magzines I have that commercial about the
>Nokiaphone with a foldupscreen,I will take a look today and see if I
>find it.

Thanks

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 18:26:10 +0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Anand Rao <slim1005@HK.SUPER.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Anand Rao <slim1005@HK.SUPER.NET>
Subject:      Re: WWW/LX access using calling cards
Comments: To: thegeeman2@EARTHLINK.NET
In-Reply-To:  <199911160951.BAA27334@goose.prod.itd.earthlink.net>
Mime-Version: 1.0
Content-Type: multipart/alternative;
              boundary="=====================_20511390==_.ALT"

--=====================_20511390==_.ALT
Content-Type: text/plain; charset="us-ascii"

The modem did not disconnect, it just hung it there repeating the voice prompt
that was not very intelligible.

Do the prepaid cards work without voice prompts? Maybe there is a way to make
my card work without the voice interruptions.

One of the great features about WWW/LX is that you can configure it to
disconnect after downloading the messages and thereby not incur heavy
long-distance charges. Some hotels charge for a minimum of three minutes,
though, and one should be careful at such establishments.

I do not know what it would take to make the software work around these
limitations of the ISP and long-distance calling cards, but I would consider it
a highly desirable upgrade and would not hesitate for a moment to pay for such
an upgrade. As I mentioned earlier, what these guys charge for the software is
so reasonable compared to the value you get.



At 01:53 AM 16-11-1999 Tuesday -0800, J.A. Vart wrote:
>>I had to call my ISP in Hong Kong via IDD which I did as I had to get to
those
>>messages. However, I could not use my AT&T calling card to establish the
>
>Was your modem disconnecting after "Thank you for using AT&T Worldsomething...
>Some modems do not appreciate "conversation" :<)
>
>>connection. The WWWSETUP program could take in the long string, but the
>
>
>This where a visit to the local "Public Phone Center" with an (or many)
>attendant
>and an acoustic coupler comes in handy
>And after the learning curve, purchase a "local" prepaid calling card
>and use a telephone booth in a relatively secure area
>
>>The only option was to use the hotel phones, at the AT&T operator assisted
>>rates plus a 35% markup. The $89 I paid for WWW/LX was peanuts compared to
>what
>>the hotels ended up making on the phone calls.
>
>
--=====================_20511390==_.ALT
Content-Type: text/html; charset="us-ascii"

<html>
<font size=3>The modem did not disconnect, it just hung it there
repeating the voice prompt that was not very intelligible. <br>
<br>
Do the prepaid cards work without voice prompts? Maybe there is a way to
make my card work without the voice interruptions.<br>
<br>
One of the great features about WWW/LX is that you can configure it to
disconnect after downloading the messages and thereby not incur heavy
long-distance charges. Some hotels charge for a minimum of three minutes,
though, and one should be careful at such establishments.<br>
<br>
I do not know what it would take to make the software work around these
limitations of the ISP and long-distance calling cards, but I would
consider it a highly desirable upgrade and would not hesitate for a
moment to pay for such an upgrade. As I mentioned earlier, what these
guys charge for the software is so reasonable compared to the value you
get. <br>
<br>
<br>
<br>
At 01:53 AM 16-11-1999 Tuesday -0800, J.A. Vart wrote:<br>
&gt;&gt;I had to call my ISP in Hong Kong via IDD which I did as I had to
get to those<br>
&gt;&gt;messages. However, I could not use my AT&amp;T calling card to
establish the<br>
&gt;<br>
&gt;Was your modem disconnecting after &quot;Thank you for using AT&amp;T
Worldsomething...<br>
&gt;Some modems do not appreciate &quot;conversation&quot; :&lt;)<br>
&gt;<br>
&gt;&gt;connection. The WWWSETUP program could take in the long string,
but the<br>
&gt;<br>
&gt;<br>
&gt;This where a visit to the local &quot;Public Phone Center&quot; with
an (or many) <br>
&gt;attendant<br>
&gt;and an acoustic coupler comes in handy<br>
&gt;And after the learning curve, purchase a &quot;local&quot; prepaid
calling card<br>
&gt;and use a telephone booth in a relatively secure area<br>
&gt;<br>
&gt;&gt;The only option was to use the hotel phones, at the AT&amp;T
operator assisted<br>
&gt;&gt;rates plus a 35% markup. The $89 I paid for WWW/LX was peanuts
compared to <br>
&gt;what<br>
&gt;&gt;the hotels ended up making on the phone calls.<br>
&gt;<br>
&gt;</font></html>

--=====================_20511390==_.ALT--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 06:03:55 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: WWW/LX PLUS demo
Comments: To: nospam@UNDECIMUS.FREESERVE.CO.UK
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

 Tony wrote:

" if I recall correctly you said you had already gone to
altavista
and searched and all that would have probably used up the
16K."

Even if my knowledge of computers is far from expertlevel,I do have=
 a brain:-)

I did the Altavista searching first with my registered WWW/LX 1.1 and=
 then typed manually the webadressses in the Plusversion.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 07:03:42 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      200LX for a journal
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> one use of my lx is to write my diary, not just for myself, but for my
> future children


I have begun doing this with my palmtop.  I have found PE and PIM a good
combination for a journal.  I have always had an interest in keeping a =
journal,
but never managed it until I hit on this combination.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 13:33:01 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: WWW/LX PLUS demo
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Lars,


> ... I do have a brain:-)

I am glad you mentioned that.

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 07:42:40 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: 200LX for a journal
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----_=_NextPart_001_01BF3038.73FC83F6"

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01BF3038.73FC83F6
Content-Type: text/plain

I agree. PE is excellent for keeping a personal journal!  You can even
encrypt it if you want/need to.

Steve

        > one use of my lx is to write my diary, not just for myself,
but for my
        > future children


        I have begun doing this with my palmtop.  I have found PE and
PIM a good
        combination for a journal.  I have always had an interest in
keeping a journal,
        but never managed it until I hit on this combination.

        Steve Carder

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

------_=_NextPart_001_01BF3038.73FC83F6
Content-Type: text/html
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12">
<TITLE>RE: 200LX for a journal</TITLE>
</HEAD>
<BODY>

<P><FONT FACE=3D"Arial">I agree. PE is excellent for keeping a personal =
journal!&nbsp; You can even encrypt it if you want/need to.</FONT>
</P>

<P><FONT FACE=3D"Arial">Steve</FONT>
<UL>
<P><A NAME=3D"_MailData"></A>
<BR><FONT SIZE=3D2 FACE=3D"Arial">&gt; one use of my lx is to write my =
diary, not just for myself, but for my</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">&gt; future children</FONT>
</P>
<BR>

<P><FONT SIZE=3D2 FACE=3D"Arial">I have begun doing this with my =
palmtop.&nbsp; I have found PE and PIM a good</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">combination for a journal.&nbsp; I =
have always had an interest in keeping a journal,</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">but never managed it until I hit on =
this combination.</FONT>
</P>

<P><FONT SIZE=3D2 FACE=3D"Arial">Steve Carder</FONT>
</P>

<P><FONT SIZE=3D2 FACE=3D"Arial">** HPLX-L LIST Info at <A =
HREF=3D"http://www.sp.uconn.edu/~mchem1/HPLX.shtml" =
TARGET=3D"_blank">http://www.sp.uconn.edu/~mchem1/HPLX.shtml</A></FONT>
</P>
</UL>
</BODY>
</HTML>
------_=_NextPart_001_01BF3038.73FC83F6--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 05:45:32 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@YAHOO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@YAHOO.COM>
Subject:      Re: Morphyone english info $B#r (Bmation.
Comments: To: "KAZU(Kazuhisa Ta" <QWQ11433@NIFTY.NE.JP>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Kazu
wanna get together for a beer?
al chin


--- "KAZU(Kazuhisa Ta" <QWQ11433@NIFTY.NE.JP> wrote:
> Hi folks!
> English information about the Morphyone are released.
> See this URL.
> http://member.nifty.ne.jp/toyozou/palmpc/release_English.html
> Bye.
>
> P.S. Now I'm in Chicago.
> ------------------------------------
>       KAZU (Kazuhisa Tanabe)
>  Kyoto, Japan
>  E-mail     QWQ11433@nifty.ne.jp
> ------------------------------------
>
> ** HPLX-L LIST Info at
> http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 07:55:38 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: WWW/LX and delivery notification.
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 16 Nov 1999 11:02:30 +0100, Tomas Moberg <Tomas.Moberg@ABC.SE> =
wrote:

> * X-priority
> * Importance
> * Sensitivity
>
> What are they. And what can one write in those fields?

I would also like to know <show ignorance>.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 06:00:01 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@YAHOO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@YAHOO.COM>
Subject:      Re: Unsubscribe + WorldWar3
Comments: To: schittke@RZ.FH-AUGSBURG.DE
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

comment
when yor starving yu wood kill to eat.
to be politically correct is to deny the truth.

haven't been there and ain't done that
but I kan understand it.

--- Lars Hedstroem <nxw988e@TNINET.SE> wrote:
> Schittke wrote:
>
> >
> Though I do hope that you were just kidding there are some
> things on
> earth that should be excepted from that.
> Or, to quote our foreign minister (when he was just new to
> theparliament) to somebody just like you:
> "Mit Verlaub, Sie sind ein Arschloch!"
> "
>
> I forgot to mention that "First money then moral" was a
> travesty on "First food then moral".I suppose you as a German
> know who said these words.
>
> The arschloch quote you refer to,if I recall right,is not of
> our days?
>
>
> Lars Hedstrom/Schweden
>
> ** HPLX-L LIST Info at
> http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 08:00:52 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: 200LX for a journal
In-Reply-To:  <2B24B1089184D111B2A90000F6AA27B3041FF28E@memex1.harrahs.com>
              from "Steve Dowell" at Nov 16, 99 07:42:40 am
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> I agree. PE is excellent for keeping a personal journal!  You can even
> encrypt it if you want/need to.

I've been doing this for years with Memo and the built-in encryption it
offers.

-Chris

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 09:03:54 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Novosad <Novosad@SERVER030.FWB.SAIC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Novosad <Novosad@SERVER030.FWB.SAIC.COM>
Subject:      Re: WP 5.1 faxing
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

>Steve,
>
>> I have faxed from WP 5.1.  The fax driver came with
>> my modem and installs as a printer driver in WP 5.1.
>> Printing to it creates whopping big graphic that is
>> then sent by a separate modem program.
>
>This did work from the hp200lx?! Great, could you go a little bit more
>into detail.
>
>Regards
>
>Helmuth

No, from a desktop computer.  Someone said WP 5.1+ was
required.  However, if I had a modem in my 200LX I see
no constraints on using that software, or someting
similar, to fax from the palmtop.

Steve

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 09:09:58 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
Comments:     RFC822 error: <E> Unmatched parenthesis in address field.
Comments:     RFC822 error: <W> Incorrect or incomplete address field found and
              ignored.
From:         Undetermined origin c/o LISTSERV administrator
              <owner-LISTSERV@UCONNVM.UCONN.EDU>
Subject:      Re: Post/lx and downloading headers
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Martin wrote:

"Almost all messages you post have Tomas Moberg as the sender,
but some of them have the above as sender why? Do you send the messages=
 to thelist.hplx at the newsserver or to the mailaddress hplx list?"

Ever since I subscribed to this mailinglist my emails have been haunted.Som=
etime people who send me emails get them back or
they go to somone else,old emails suddenly shows up etc.
I have no idea how my post could possible have Tomas Moberg as sender!But=
 if I recall right so had also Tomas Moberg in Upsala some remarks about=
 my emails,nevertheless I have forgotten what he said.

I send all my emails to the list to its real adress and not through=
 any newsservers.

I have discussed this problem with the supportguys behind this list=
 but as all supports they say that the failure must be somewhere else...:-(=
 I also doubt that I would be the only person having this problems on=
 the mailinglist!?


Anyhow I always write Lars Hedstroem/Sweden after my emails,so if this=
 is written I am the writer no matter who is the sender.


You continued:

"I do not know. I have only tested the 2.2 version.. Somebody
else haveto answer this one.Why don'nt you just get a license on the=
 new version. "

Well I don't want to buy the pig in the poke,I have downloaded the demo=
 and yesterday I atleast got the emailclient to work.
Do you ever have problems with 2.2 when downloading pages on internet,i.=
 e. get the errormessage:"Problem recieving data,cannot create file"?



" I am not interested in football at all.."

Not so "normal" :-))

"under the influence of alcohol"

Very normal:-))


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 09:10:04 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill A <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Strange error message when sending email withh post/lx
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Martin wrote:


"I have problems with sending some mails.. I compose messages
asusually..The messages have no attachments of any kind. They "look"normal.=
 Nosig _attachments_ either..When the messages are sent sometimes one=
 email does not getsent and I get
this:"Failure message not sent, file to include not found"
What is wrong. I have tried to cut/paste the message body into"

Did you get any answers on this question?I had the intention to answer=
 you as I occasionally have the some problem,though with other errormessage=
s,but my ISP closed me down for a week so I
haven't had neither possibility nor time to bring this question up until=
 now.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 15:42:12 +0100
Reply-To:     Etienne Lemaire <stelem@attglobal.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Etienne Lemaire <etienne.lemaire@PANDORA.BE>
Subject:      Re: Back Up/CPack good news/bad news
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Just in case this could stike a spark somewhere, I have a similar problrm:
when I install the Logitech cordless mouse software on my desktop, my
Palmtop isn't detected any more. Transfile works OK. If I (re)install the
Cpack soft, the port is correctly identified, and thus the palmtop's
presence
 But no way to use Cpack with the cordless mouse.
Anyone knows a way around?

Etienne
----------
From: Tom Nemeth <tnemeth@COMPUSERVE.COM>
To: HPLX-L@UCONNVM.UConn.Edu
Subject: Back Up/CPack good news/bad news
Bad News:  CPack still won't connect to my 200. Exorcism has no effect
whatsoever....
Good News:  Transfile decided to work again.  Backed up all my data such as
it is.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 08:07:03 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Kopplin <kopplin@TECHNOIR.NU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Kopplin <kopplin@TECHNOIR.NU>
Subject:      Re: hp200lx hardware site?
In-Reply-To:  <199911161002.LAA01515@d1o14.telia.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Are you referring to db.hplx.net? That site stopped working a long time
ago. Any search on the database resulted in errors. Apparently now it has
been removed.

Too bad, it seemed like a good idea. Maybe there wasn't enough interest.


> What is the addres to the HP hardware compatibility site.
> I remember there was a site that collected info on compatible gadgets.
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 07:38:22 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Hi (again) and Modem (again) :-)
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

I think this modem was mentioned a few months ago (around July), when it was
scheduled for Aug release.

Since the product is still "coming soon", I guess they've had problems.  Would
be interesting to see for its size, even if the 200LX won't do much better than
14400 given its 8250 UART on the serial port (although the error correction may
still be a benefit).

The July 15 press release on the same site says the modem uses 2 AAA batteries.

- Longden






Michael Minnick <razzoid@YAHOO.COM> on 11/15/99 05:28:57 PM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Michael Minnick <razzoid@YAHOO.COM>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Hi (again) and Modem (again) :-)




I don't know if anybody saw my message about the
external modem.  It is 56k uses a serial port and is
supposed to be universally compliant with almos all
systems.  It runs off of a 9 volt battery or 2 AA's
(I'm not sure which).  It weighs about 3 oz. with
batteries.  For more information go to:
http://ppc.trogoncomputer.com/products/unimicro/index.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 10:55:44 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, DDEVENS@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Doug Devens <DDEVENS@AOL.COM>
Subject:      Quicken ??
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

In a message dated 11/16/99 12:01:47 AM Eastern Standard Time, Colin Lambert
writes:

<< I use Quicken v6 and it imports pocket Quicken files fine. >>

I haven't been able to import Pocket Quicken into Quicken 6.0 for Windows.
Are you using the DOS version or am I missing something? I create an export
file from the palmtop, then try to import it to the desktop version, which
says it is unable to open the file. TIA
Doug

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 09:11:32 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Organization: Orion Enterprises
Subject:      The New HP
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="------------6A3FFD0BC0BB17AC52DC0410"

This is a multi-part message in MIME format.
--------------6A3FFD0BC0BB17AC52DC0410
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Is anyone else as skeptical about this as I am?

I mean, the part about "return to its roots - that of being an inventor
and innovator."  It might be nice, but they are in bed with Micro$oft,
big-time; will it really happen?

Hewlett-Packard unveils new look

          LAS VEGAS (AP) - Hewlett-Packard CEO Carly Fiorina unveiled
her vision Monday for transforming the
          company from a product-driven colossus to a pioneer of
Internet services and ideas, a change that will be
          highlighted by a $200 million marketing campaign. Fiorina, a
former Lucent Technologies executive hired in July
          with the goal of reinvigorating the 60-year-old company, told
attendees at the giant annual Comdex fall computer
          show that the Palo Alto, Calif.-based giant will return to its
roots - that of being an inventor and innovator. The
          company unveiled a marketing campaign that will emphasize the
Palo Alto garage in which founders Bill Hewlett
          and Dave Packard turned out their first product, an electronic
instrument used to test sound. Its new logo will be
          "HP: Invent." See full story at
http://www.infobeat.com/stories/cgi/story.cgi?id=2562098529-07f

Regards,
Richard


--------------6A3FFD0BC0BB17AC52DC0410
Content-Type: text/x-vcard; charset=us-ascii;
 name="rsmith.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Richard A. Smith / Patti Smith
Content-Disposition: attachment;
 filename="rsmith.vcf"

begin:vcard
n:Smith;Richard and Patti
x-mozilla-html:FALSE
org:Orion
adr:;;;;;;
version:2.1
email;internet:rsmith@enol.com
note;quoted-printable:aka, on eBay: seronac@auction.skytel.com=0D=0A*=0D=0A"Statistically, at least half of the people in the world are of below-average intelligence." * =0D=0A"If variety is the spice of life, then humor is the dessert." *
fn:Richard and Patti Smith
end:vcard

--------------6A3FFD0BC0BB17AC52DC0410--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 07:51:11 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Filer backup
Comments: To: Nathalie Bugeaud <tps-seti@WANADOO.FR>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>>
q1: when instructing backup in Filer to back up all files _and_ directories,
it ony copies files in the current directory, but no files in the tree
directories?
<<

I just tried it on my LX and all files and subdirectories (and their files) were
copied correctly from C: to A:\TMP

Make sure:
1) There's room on the destination drive
2) On the Backup Files panel, you have the "Modified files only" box unchecked.
3) Likewise, the "All directories and files" box must be checked

>>
q2: when starting a dos session (ctrl+123 or filer+options+dos) i get a C:\
but the lx locks up and doesn't even shut off; only a ctrl+alt+del fixes it
(until i run the next dos session; i have learned to save everything since)
<<

Could be a conflict with one of your TSRs loaded during boot, or that the
combination of TSRs may be having a problem.

You can try commenting out a TSR at a time (add "rem" to the front of the line
in autoexec.bat/config.sys) to see where the problem may be occurring.
Sometimes the problem can be fixed by changing the order of loading the TSRs.

Such is life in the DOS world.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 16:49:19 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: WWW/LX access using calling cards
Comments: To: Anand Rao <slim1005@HK.SUPER.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> The modem did not disconnect, it just hung it there repeating the voice prompt
> that was not very intelligible.
>
> Do the prepaid cards work without voice prompts? Maybe there is a way to make
> my card work without the voice interruptions.

It is irritating.  While supposedly these companies offer all kinds of
technology and data transfer and at the same time the various voice
prompts through a complete monkeywrench into attempting automated
dialing.

Sometimes it is just a matter of ignoring those various voice prompts
and having the modem continue to dial but you may need to tweak the
timing using commas and other delays to work around what tones are
expected and when.  And that problem means experimenting, sometimes at a
high cost depending on where you are located.  I think that is why so
many people want to use their own cell phones.  Once you have tweaked,
you are set.

Good luck

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 16:49:23 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: WWW/LX PLUS demo
Comments: To: nospam@UNDECIMUS.FREESERVE.CO.UK
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I did the Altavista searching first with my registered WWW/LX 1.1 and
>  then typed manually the webadressses in the Plusversion.


Are you using the most recent version of hv or still the one that came
with www/lx version 1.1?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 10:51:32 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Filer backup
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 16 Nov 1999 07:51:11 -0800, Longden Loo <Longden_Loo@CANDLE.COM> =
wrote:

> I just tried it on my LX and all files and subdirectories (and their =
files) were
> copied correctly from C: to A:\TMP

Does it also copy hidden files?

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 09:03:02 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Filer backup
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Good point Jeff.

No, it didn't copy my hidden files.  Maybe that's why I use pkzip for all my
backup chores.

- Longden





Jeff Johns <jeffj@SCOTT.NET> on 11/16/99 08:51:32 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Jeff Johns <jeffj@SCOTT.NET>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: Filer backup





> I just tried it on my LX and all files and subdirectories (and their files)
were
> copied correctly from C: to A:\TMP

Does it also copy hidden files?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:49:02 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Filer backup
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 16 Nov 1999 09:03:02 -0800, Longden Loo <Longden_Loo@CANDLE.COM> =
wrote:

> No, it didn't copy my hidden files.  Maybe that's why I use pkzip for =
all my
> backup chores.

So, Filer's backup is basically an automated xcopy. I sure wish that =
xcopy
would copy hidden files....

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 13:14:21 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: SysMgr and AppMgr (Was Re: WWW/LX PLUS a flop??)
Comments: To: Peniel Romanelli <peniel@WEB2000.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Peniel wrote:


"Not exactly.  The System Manager is the task-switching TSR"

What is TSR an abbreviation of?What does it?

"that's loaded by the 200 line in autoexec.bat
 The Application Manager is the
program launcher that starts from the &... More blue key. "

OK.But certain programs are not system manager compliant,does this only=
 mean that they are not possible( due to memorylimits) to launch from=
 application manager?

"SysMgr can work without AppMgr, but not the reverse.  X-Finder or SMMx=
 can be used as alternate application managers, but that's a different=
 topic...."

OK,and if you don't have patience with my questions you don't have to=
 answer them.


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 13:14:28 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: WWW/LX PLUS a flop??
Comments: To: A Meshar <sponsor@FTEL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Avi wrote:


"No. But when the program "feels" that the count of bytes
reached 16K, it cuts off communications. It counts ALL the
bytes transmitted: Handshake, Altavista inquiry, EVERYTHING -
even what your machine sends out - it sums EVERYTHING UP and
when it reaches 16K, it cuts off communication."

Good,then I can draw the conclusion that the error messages I get:"cannot=
 create file" when trying to download/open pages on internet with  the=
 demo of WWW/LX Plus is not due to neither memory- nor bandwidthlimits?I.e.=
 MaxDos will not help?

In another email you complained about long signaturefiles,isn't this=
 to go little too far concerning the number of kbyte it takes?Many of=
 them I have seen are really heavy and even small works of art.They=
 say it is not good to just train one brainhalf,the artistry in the=
 other one also needs to be confirmed.

So I vote for more heavy and artistic signaturefiles on the mailinglist=
 so the intellects of us LX users not calcifies.


Lars Hedstrom/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 12:29:27 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: SysMgr and AppMgr (Was Re: WWW/LX PLUS a flop??)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 16 Nov 1999 13:14:21 -0500, Lars Hedstroem <nxw988e@TNINET.SE> =
wrote:

> What is TSR an abbreviation of?What does it?

Terminate Stay Resident

> OK,and if you don't have patience with my questions you don't have to
> answer them.

We are patient :)

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 12:29:29 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: WWW/LX PLUS a flop??
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 16 Nov 1999 13:14:28 -0500, Lars Hedstroem <nxw988e@TNINET.SE> =
wrote:

> So I vote for more heavy and artistic signaturefiles on the mailinglist
> so the intellects of us LX users not calcifies.

It doesn't bother me, but I do believe Al implemented a 5 line sig file
limit some time ago.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 10:30:49 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: SysMgr and AppMgr (Was Re: WWW/LX PLUS a flop??)
Comments: cc: nxw988e@tninet.se
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>What is TSR an abbreviation of?What does it?

TSR is a Terminate and Stay Resident program, whose technical spec was
introduced by MS back when the PRINT command came out (the first such TSR ...
DOS 2?).  TSRs are executed, and rather than completing and returning things
back to the way they were, leave something of itself in memory, usually to
continue performing a service of some sort.

>OK.But certain programs are not system manager
>compliant,does this only mean that they are not
>possible( due to memorylimits) to launch from
>application manager?

I don't know the exact original question, but most programs (even non system
manager compliant) are launchable from application manager using MaxDOS unless
MaxDOS was loaded late in the boot and doesn't have much memory to even start
with.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 14:13:00 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      FLUFF:Nokia 9110 Communicator
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hello Martin!

I have found the article about the Nokia mobilphone with a foldup screen.

The phone was NOKIA 9110 Communicator and it really looks heavy!!It=
 weighs 253g,backlit screen(the size looks to be about as big as the=
 LX's) , loudspeaker, pictureviewer, emailing, fax,calendar,SMS, notetaker=
 etc

You can read (and look)more yourself on www.nokia.se or perhaps even=
 better www.nokia.no

Strange that the Finns could build such a phone,if it had been the swedish=
 concern Ericsson I wouldn't be surprised:-))

The price I don't know but it looks expensive.

If you find out what OS it has-inform me.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 13:37:30 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ted Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ted Heise <theise@NETINS.NET>
Subject:      Re: SysMgr and AppMgr (Was Re: WWW/LX PLUS a flop??)
In-Reply-To:  <HPLX-L%99111613142129@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 16 Nov 1999, Lars Hedstroem wrote:

> OK.But certain programs are not system manager compliant,does
> this only mean that they are not possible( due to memorylimits)
> to launch from application manager?

Longden explained that launching is not really an issue,
although you may need MaxDos for some applications (app).

If apps are System Manager compliant, that means they can
be included in task switching.  In other words, you can have
the app open and switch to a SysMan app (e.g., PhoneBook) and
back again without having to start or close either app.

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:23:05 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Filer backup
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>So, Filer's backup is basically an automated xcopy.
>I sure wish that xcopy would copy hidden files....


The xcopy in Win95 has a /H option for copying hidden and system files.  I know
      this option isn't in DOS 5 nor 6.22.



The xcopy in Win95 (windows/command/xcopy) seems to come in two pieces;
xcopy.exe and xcopy32.exe.  The former is 3,878 bytes and the latter is 41,472
bytes compared to 11,184 for the one in d:\dos on the LX.



My guess is that the Win95 xcopy.exe just acts as a front for xcopy32.exe.
Don't know how well the Win95 version runs (if at all ... or if advised) on the
LX.



There are also a variety of enhanced xcopy clones on Simtel, tho I haven't tried
any.



- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 11:32:53 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      Re: Remote connection with Filer and a modem?
Comments: To: Tomas Moberg <Tomas.Moberg@ABC.SE>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I've tried this and never managed to make it work. Looks easy enough,
theoretically...

Philippe

----- Original Message -----
From: Tomas Moberg <Tomas.Moberg@ABC.SE>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Tuesday, November 16, 1999 2:02 AM
Subject: Remote connection with Filer and a modem?


I was trying to get a remote connection to a PC runing HP conectivity
pack via a modem.

I have entered the PC's phone number in Filers remote setting.
I call the remote PC via a pcmcia modem in the hp. The remote PC
answers and You hear the negotiating going on. ( I have tried with
datacomm and that worked OK. There was a connection with win95 hyper
terminal).
There is a brief flash on the remote PC, but its so fast I can not read
it. And on the hp the message that tells me to wait for a connection
disapears

Anybody tried this, and can give me a hint?

I have set 2400bps and server enabled.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 14:36:06 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Question about Buddy
MIME-version: 1.0

On 1999-11-10 HPLX-L@UCONNVM.UCONN.EDU said:

   >I wonder if perhaps the Fn-l or some other Fn-? is being accidently
   >pressed which might turn off certain buddy functions.  I've
   >accidently done this while using TSE (qedit) and found that I could
   >not re-invoke those buddy functions while still in the editor.
   >Meaning I could accidently turn off d-click or smartcaps from the
   >editor but not turn it back on while still in the editor.  And the
   >accidental Fn-? was instead of hitting an Alt-? sequence - in other
   >words a typo.

You know, I hadn't thought of this idea.  I hadn't noticed pressing an Fn-?
instead of an Alt-? sequence, but it's entirely possible.  I will keep this
in mind should the functions suddenly stop working again.  Thanks for
pointing this out.


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 14:36:41 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Using 200LX as WWW browser
Comments: To: sponsor@ftel.net
MIME-version: 1.0

Avi M. stated firmly that:

   >First, I work at D&A Software, which sells WWW/LX. HV is a
   >client program that "paints" Web documents on the palmtop
   >screen.
   >You use the term "serious Webbrowsing" and I am not sure what
   >you mean. My take: HV is a 75K program. It supports HTML 3.2
   >specifications. This means no Java, no Javascript, no animated
   >GIFs. Tables are not rendered as you may be used to them in
   >Netscape or MSIE, but much simpler and with regard to the
   >screen limitations (and CGA). Frames are rendered by creating
   >an on the fly document with links to each of the pages in the
   >frameset, since it is hard to imagine cramming a 1078x1280
   >(or even a full 640x480) into a CGA screen for example.
   >There are other limitations for HV, check the docs.

Thank you for this excellent description of WWW-LX.  You've answered my
question about the program.  I was wondering whether I'd be able to use
the program for those times when I'm travelling and want to access the
Web, but don't want to lug a laptop.  From your description, and
other's comments it's clear your program will fit those needs.  Your
program allows us to use the LX for one more immportant need--something
that I find continually amazing about this great little computer.

Thanks again.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 14:36:47 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Appointment Book / Todo structures
Comments: To: stephan.goeldi@DATACOMM.CH
MIME-version: 1.0

   >My ToDo looks like this (the number is the priority I set):
   >0 ---------- urgent and important ----------
   >1 pay the milkman
   >1 write invoice for Alex
   >1 write invoice for Marc
   >1 write offer for Andy
   >2 ---------- urgent ----------
   >3 buy bread
   >3
   >4 ---------- important ----------
   >5 bring car to service
   >5 check website xyz.com
   >6 ---------- not important ----------
   >7 check catalog abc
   >7 check website efg.com
   >The 0, 2, 4 and 6 are the headers. These numbers are not used as
   >priorities, so the headers remain always on the right place. Each
   >day I decide, if a tasks
   >priority changes on this day. Depending on the appointments, I have
   >to change
   >this. There was an article on www.palmtoppaper.com about this
   >method.
   >Only urgent means, that it is _not_ important. Only important means,
   >that it is
   >_not_ urgent.

This is fascinating.  I have some questions about your headers/ratings.
Are the Urgent/Important ratings for those tasks that "have to get
accomplished today?  In other words, what standards do you use in
breaking down a task and deciding whether a task is "urgent", but not
"urgent and important"?

Any enlightenment you can provide would be greatly appreciated.

Regards,

David Ball
mailto:dmb10@swbell.net





Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 21:26:35 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: hp200lx hardware site?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>What is the addres to the HP hardware compatibility site.

It never worked. I made an offer to install a database for this,
but received no feedback.

Hello?

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 21:37:17 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: FLUFF:Nokia 9110 Communicator
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>I have found the article about the Nokia mobilphone with a foldup screen.


>The phone was NOKIA 9110 Communicator and it really looks heavy!!

Think of the HP LX 700 (OmniGo) with the Nokia 2110 plugged in.
It is nearly the same, except, that the 700 LX is 200 LX compatible.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 14:38:35 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: OT:Fluffiness...
MIME-version: 1.0

Jeff Johns stated firmly that:
   >> Does this view run counter to the traditions and
   >> rules of the list?
   >Nope, not really :)
   >Jeff

That's good. I didn't really think so.  <Grin>

Regards,

David Ball
dmb10@swbell.net



Palmtop Power!--This email composed on a rugged HP200LX that fits in
your pocket!

Net-Tamer V 1.11P - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 22:46:01 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Reinhard Mueller <molitor@01019FREENET.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Reinhard Mueller <molitor@01019FREENET.DE>
Subject:      RPN calculator TSR
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Hi,

does anyone know about a RPN calculator for DOS which can be
loaded tsr and activated by hotkey? I downloaded "RPN" from Super
and I like it very much, but I am missing TSR-functionality. It
would also be great if the results could be stuffed in the
keyboard buffer after exiting the calculator.

Cheers,
Reinhard

Goin' Postal - HP 100/200LX (v3.08) REGISTERED

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 22:03:22 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              jason bugler <kovaxal@HOTMAIL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         jason bugler <kovaxal@HOTMAIL.COM>
Subject:      UNSUBSCRIBE
Mime-Version: 1.0
Content-Type: text/plain; format=flowed

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 16:30:56 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Keefe <emkeefe@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Keefe <emkeefe@USWEST.NET>
Subject:      Re: RPN calculator TSR
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Is there something about the built in Calc's RPN mode that
you don't like? It has copy and paste from the results line
and since it's a part of System Mgr, it's a TSR. For
something more scientific, visit the SUPER site and search
on Math and/or calc. There are now over three dozen math and
calculator programs from which to choose.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 18:02:36 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: WWW/LX PLUS demo
Comments: To: fjkaufman@WORLDNET.ATT.NET
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Kaufman wrote:


"Are you using the most recent version of hv or still the one
that came with www/lx version 1.1?"

Interesting question cause I suspect that the most recent version of=
 hv is not so good together with version 1.1,i.e. a yes-answer on your=
 question.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 18:02:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      WWW/LX Plus a flop??
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Jeff wrote:


"It doesn't bother me, but I do believe Al implemented a 5 line
sig file limit some time ago."

So he did,lets then see if this 5 line limit wasn't just an act of fluffrus=
tration:-))

I counted the number of signs in your signature Jeff and they were 151.This=
 gives 151*8=3D1208bits as one sign is 8 bits.
If i download at the speed of 14 400 bits/sec it will take
1208/14400=3D0.08 seconds to download your signature.
For duoblespeed 1208/19200=3D0.06

If you had had 10 times more signs in your signaturefile Jeff, it would=
 have taken 0.8 seconds to download at the 14400 rate.If I download=
 60 emails aday with each of them having 10 times more than Jeff's 151=
 it would take me 60*0.8=3D48 seconds  with singlespeed,that is not=
 a single minute.


Well,if these calculations are right,it seems to me Al,if you are reading=
 this,that you are,as it stays in the Bible somewhere, straining mosquites=
 and swallowing camels when trying to reduce the fluffnoise here on=
 the mailinglist:-))

I mean if now that was the purpose with this 5 line limit.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 23:08:17 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: 200LX for a journal
Comments: To: Chris Lott <rclott@MAIL.HIWAAY.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Chris,

> I've been doing this for years with Memo and the built-in encryption it
> offers.

Memo offers built-in encryption? How does it work??

GtX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 00:17:10 -0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peter Eberl <peb@EBERL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peter Eberl <peb@EBERL.COM>
Subject:      Re: FLUFF:Nokia 9110 Communicator
Comments: To: Lars Hedstroem <nxw988e@TNINET.SE>
In-Reply-To:  <HPLX-L%99111614130082@UCONNVM.UCONN.EDU>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 14:13 16.11.1999 -0500, you wrote:
>Hello Martin!
>If you find out what OS it has-inform me.

GEOS

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 17:04:08 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: SysMgr and AppMgr (Was Re: WWW/LX PLUS a flop??)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue, 16 Nov 1999 19:05:12 -0500 (EST)

05h50m56s ago ...
On Tue, 16 Nov 1999, Lars Hedstroem wrote:
> OK.But certain programs are not system manager compliant,does this
> only mean that they are not possible( due to memorylimits) to launch
> from application manager?

No.  System Manager compliant programs are the built-in apps and
programs with the .exm extension.  They can be task-swapped using
SysMgr.  They can't be run from raw DOS without the SysMgr.  Regular
DOS (.com and .exe) programs aren't SysMgr compliant, but can be
launched from the AppMgr screen.  But only one DOS prog can be started.
You can frequently run into memory limits using DOS progs, but that
can be solved by either terminating SysMgr or by using MaxDOS.  MaxDOS
is a much better choice, because you can start your large DOS apps
from an icon.

> OK,and if you don't have patience with my questions you don't have
> to answer them.

No problem...  That's why we're on the list.   8-)

HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 19:30:25 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Solutions to the FLUFF problem
Comments: To: Mike Wagstaff <aj93@DIAL.PIPEX.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> ... The first is to take it
> to the fireside newsgroup on news.hplx.net - it's just
> sitting there, crying out to be used!

This assumes they can, or want to, participate in a news group versus
a strictly email list.

Also many fluff items start out as a response or side effect of a
non-fluff post.  It is sometimes less than useful to reply in a
different location.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 18:52:34 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      FLUFF was Re: WWW/LX Plus a flop??
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 16 Nov 1999 18:02:49 -0500, Lars Hedstroem <nxw988e@TNINET.SE> =
wrote:

> If you had had 10 times more signs in your signaturefile Jeff, it would =
have
> taken 0.8 seconds to download at the 14400 rate.If I download 60 emails =
aday
> with each of them having 10 times more than Jeff's 151 it would take me
> 60*0.8=3D48 seconds  with singlespeed,that is not a single minute.

Cool :)

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 19:09:23 +0000
Reply-To:     owen6511@home.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
Comments:     Authenticated sender is <owen6511@mail.rdc1.il.home.com>
From:         Terry Owen <sandstar@TECHNOLOGIST.COM>
Subject:      Re: FLUFF:Nokia 9110 Communicator
In-Reply-To:  <HPLX-L%99111614130082@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

At one time I had a Nokia emulator for Win 95 but I must have
deleted it (and the bookmark to where I got it) But if you have
WinNT, there is a 9110 emulator here:


http://www.forum.nokia.com/developers/comfriendly/comfriendly.html

Terry

On 16 Nov 99 at 14:13, Lars Hedstroem wrote:

> Hello Martin!
>
> I have found the article about the Nokia mobilphone with a foldup
> screen.
>
> The phone was NOKIA 9110 Communicator and it really looks heavy!!It
> weighs 253g,backlit screen(the size looks to be about as big as the
> LX's) , loudspeaker, pictureviewer, emailing, fax,calendar,SMS,
> notetaker etc
>
> You can read (and look)more yourself on www.nokia.se or perhaps even
> better www.nokia.no
>
> Strange that the Finns could build such a phone,if it had been the
> swedish concern Ericsson I wouldn't be surprised:-))
>
> The price I don't know but it looks expensive.
>
> If you find out what OS it has-inform me.
>
> Lars Hedstroem/Sweden
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
=-=-=- owen6511@home.com -=-=-=

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 20:34:07 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: FS: acCIS v4.0

Earlier, I posted that I was on vacation with very primitive and limited
access to email and expressed interest in the acCIS v4.0 software that
was offered by someone on this list.

Since I was reading my mail with a file editor from an exported mail file
that wouldn't import correctly and am recieving this list in digest form,
I didn't get the name of the person offering the software.  I asked the
poster to please send me his address so that I could have it when I got
home on Tuesday the 16th where I would be able to receive a shipment.

As promised, I am now at home on Tuesday the 16th, and am interested in
the software, however I have not yet received the posters name or
address.

If the original poster still has the acCIS v4.0 software, please send me
your name and address.

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 20:04:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Windows 95/98 won't release the serial ports

Hi Tom,

>CPack a viable alternative?  Seems like the Desktop Com Port won't free
up
>for CPack but obviously did for Transfile.  Is there a way to control
Com
>Ports from Win 98?  I have not been able to do so (or much of anything
else
>as my msg's seem to indicate!).
>
>Again thanks to all!
>Tom still in Muscat

Sorry for not catching the correct subject line of your original post.
I'm subscribed to the digest form of this list, so my replies don't
necessarily grab the subject line.

I work as a beta tester for remote backup software and we learned a trick
relating to that.  To force Windows to release it's serial ports we
include the following additional lines under the heading "386Enh" in
the system.ini file in the windows directory:

ComBoostTime=5
Com1AutoAssign=2
Com2AutoAssign=2
Com3AutoAssign=2
Com4AutoAssign=2
Com1FIFO=1
Com2FIFO=1
Com3FIFO=1
Com4FIFO=1

Please let us know if this fixes your problem with getting Windows 95/98
to release it's serial ports. :-)

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 10:29:23 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              =?euc-kr?B?uenDorHU?= <bcg@SWC.SEC.SAMSUNG.CO.KR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         =?euc-kr?B?uenDorHU?= <bcg@SWC.SEC.SAMSUNG.CO.KR>
Subject:      Who do you have a Hornet chip information?
MIME-Version: 1.0
Content-Type: text/plain

I am plannig  the 32M memory module DIY.
But, I don't have a Hornet chip data sheet.
Who do you have a Hornet information?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 20:45:30 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, sponsor@FTEL.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: WWW/LX PLUS a flop??
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> "No. But when the program "feels" that the count of bytes
> reached 16K, it cuts off communications. It counts ALL the
> bytes transmitted: Handshake, Altavista inquiry, EVERYTHING -
> even what your machine sends out - it sums EVERYTHING UP and
> when it reaches 16K, it cuts off communication."
>
> Good,then I can draw the conclusion that the error messages I get:"cannot
>  create file" when trying to download/open pages on internet with  the
>  demo of WWW/LX Plus is not due to neither memory- nor bandwidthlimits?I.e.
>  MaxDos will not help?

If you wish to draw that conclusion, fine, I would not make
such a leap, it is not exactly logical.

MaxDOS will not help you make the Demo version longer - when
it gets to the 16K limit it'll cut off, MaxDOS or not.

> In another email you complained about long signaturefiles,isn't this
>  to go little too far concerning the number of kbyte it takes?Many of
>  them I have seen are really heavy and even small works of art.They
>  say it is not good to just train one brainhalf,the artistry in the
>  other one also needs to be confirmed.

I will not change the limit of 16K - if this is where you
drive this message. I hope this statement has intrinsic
clarity :-) ...

> So I vote for more heavy and artistic signaturefiles on the mailinglist
>  so the intellects of us LX users not calcifies.

Seems like an idea you have not considered fully yet.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 20:45:33 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, sponsor@FTEL.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Using 200LX as WWW browser
Comments: To: David Ball <dmb10@swbell.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Thank you for this excellent description of WWW-LX.  You've answered my

I did not describe WWW/LX, I described, partially, HV :-)
WWW/LX Plus is a product that contains among others, the HV
program.

> question about the program.  I was wondering whether I'd be able to use
> the program for those times when I'm travelling and want to access the
> Web, but don't want to lug a laptop.  From your description, and
> other's comments it's clear your program will fit those needs.  Your
> program allows us to use the LX for one more immportant need--something
> that I find continually amazing about this great little computer.

The suggestion I would make to you is to fire up HV and try to
access the Webpages you think you will want to access while
travelling. The Web is moving to more and more what Peniel (I
believe) termed aptly "HV-Hostile" documents. This means that
more and more of the Web is NOT compliant with HTML 3.2, i.e.
HV may not be able to "paint" it. Also, more andm ore
Javascript is used - HV cannot do anything with this. More and
more Java is on the screens, HV can't do anything with this.
And then there are many other "doodads" being invented daily.
I am trying - hard - to lower your expectations, waaaaaaay
down, so when you see stuff not being painted you won't be
disappointed. :-)

Enjoy.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 18:13:23 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ashwin Balan <husk469@NETZERO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ashwin Balan <husk469@NETZERO.COM>
Subject:      Fluff
Comments: To: HPLX-L@UCONNVM.UCONN.EDU.
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

after my short rendezvous with a windows ce device I decided to come back
to the HP200lx.

__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 02:27:08 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Windows 95/98 won't release the serial ports
Comments: To: John J Vanderstel <j_vanderstel@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

>
> ComBoostTime=5
> Com1AutoAssign=2
> Com2AutoAssign=2
> Com3AutoAssign=2
> Com4AutoAssign=2
> Com1FIFO=1
> Com2FIFO=1
> Com3FIFO=1
> Com4FIFO=1
>

Mind if I ask what each command does?  I have to com2autoassign=2 and it
did work to allow me to move from one com application to another without
having to first terminate the dos-window or the win app that had been
using the comport.  Someone told me about this ages ago.  But never
explained it.  Altho, occasionally www/post (on the desktop) AFTER
COMMUNICATIONS is done but post is still open, will toss up that
Window-Message box:

 "www and xyz" both want the comport - basically choose one!

Anyway to also avoid that.

Thanks in advance.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 20:27:25 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Alan Peres <aperes@MCS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Alan Peres <aperes@MCS.NET>
Subject:      DOS emulator for WINCE
In-Reply-To:  <199911162308.XAA01469@linux.zrz.TU-Berlin.DE>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed

I was browsing the www.sales.com site today. It has a section selling
products including a wide selection of software for WINCE and Palm
machines. One of the products caught my eye.

It is called CE DOS. It is a DOS emulator. The product description has a
screen shot, as well as a list of supported DOS commands. The cost is a
wopping $9.95.

It is made by Paragon Technologies, whose web site is www.paragon.mda.de.

I don't know anything more about, and did not check the Paragon site for
any more information. I thought the price is right if anyone wanted to
check it out.

Alan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 20:37:20 -0600
Reply-To:     jhope@enoinc.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "ENOINC - John S. Hope" <jhope@ENOINC.COM>
Subject:      Re: DOS emulator for WINCE
In-Reply-To:  <4.2.2.19991116202034.00a19360@popmail.mcs.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

How does this apply to the HPLX?

-----Original Message-----
From: HPLX Mailing List mailto:HPLX-L@UCONNVM.UConn.EduOn Behalf Of
Alan Peres
Sent: Tuesday, November 16, 1999 8:27 PM
To: HPLX-L@UCONNVM.UConn.Edu
Subject: DOS emulator for WINCE


I was browsing the www.sales.com site today. It has a section selling
products including a wide selection of software for WINCE and Palm
machines. One of the products caught my eye.

It is called CE DOS. It is a DOS emulator. The product description has a
screen shot, as well as a list of supported DOS commands. The cost is a
wopping $9.95.

It is made by Paragon Technologies, whose web site is www.paragon.mda.de.

I don't know anything more about, and did not check the Paragon site for
any more information. I thought the price is right if anyone wanted to
check it out.

Alan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 20:51:01 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <swdowell@BELLSOUTH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <swdowell@BELLSOUTH.NET>
Subject:      Re: Fluff
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Been there, done that. : )
CE has an initial gee-whiz factor, but ultimately it's just not very
satisfying.

Welcome back.

Steve

> after my short rendezvous with a windows ce device I decided to come back
> to the HP200lx.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 20:59:52 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: DOS emulator for WINCE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 16 Nov 1999 20:37:20 -0600, "ENOINC - John S. Hope" <jhope@enoinc.=
com> wrote:

> How does this apply to the HPLX?

Many of the listmembers are forced to also use CE devices by their =
employers
and I think it was an excellent post.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 19:12:49 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ashwin Balan <husk469@NETZERO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ashwin Balan <husk469@NETZERO.COM>
Subject:      Re: DOS emulator for WINCE
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

ya I know what you mean I was enamored by the Casio E-100 and bought one,
the capabilities are nice but are unneccesary.

----------
From: Jeff Johns <jeffj@SCOTT.NET>
To: HPLX-L@UCONNVM.UConn.Edu
Subject: Re: DOS emulator for WINCE
Date: Tuesday, November 16, 1999 6:59 PM

On Tue, 16 Nov 1999 20:37:20 -0600, "ENOINC - John S. Hope"
<jhope@enoinc.com> wrote:

> How does this apply to the HPLX?

Many of the listmembers are forced to also use CE devices by their
employers
and I think it was an excellent post.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

----------

__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 19:48:33 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: DOS emulator for WINCE
In-Reply-To:  <4.2.2.19991116202034.00a19360@popmail.mcs.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 16 Nov 1999, Alan Peres wrote:

> It is called CE DOS. It is a DOS emulator. The product description has
> a screen shot, as well as a list of supported DOS commands. The cost
> is a wopping $9.95.

Just to clarify, this isn't a DOS emulator that you can run DOS programs
with; it's a command prompt for WinCE, basically.  Not the same as XT-CE.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 22:00:53 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      Re: 200LX for a journal
Comments: To: Daniel Hertrich <d.hertrich@GMX.DE>
In-Reply-To:  <199911162308.XAA01469@linux.zrz.TU-Berlin.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Daniel Hertrich wrote:

>> I've been doing this for years with Memo and the built-in encryption it
>> offers.
>
>Memo offers built-in encryption? How does it work??

I had never noticed that Memo offers encryption, but I just looked,
and it sure does. It's only available for non-ASCII files. I'm very
familiar with the encryption scheme for .?DB files, and I'm sure it's
something similar with these DOC files, but I wasn't able to figure it
out in the time I looked at it.

My guess is that probably no one outside the LX development staff
knows how it's encoded (yet), so your data should be safe for most
purposes. However, it certainly wouldn't withstand a sustained attack.

--
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 22:13:44 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Encryption & IRC was Re: 200LX for a journal
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 16 Nov 1999 22:00:53 -0600, Curtis Cameron <curtc@AIRMAIL.NET> =
wrote:

> My guess is that probably no one outside the LX development staff
> knows how it's encoded (yet), so your data should be safe for most
> purposes. However, it certainly wouldn't withstand a sustained attack.

PE also offers a form of encryption, but I prefer PGP. Although it is
crackable, I figure the 1024 bit key I use will stop at least the average
hacker.

This is what somewhat worries me about using IRC/LX or for that matter =
any
other IRC client. You can really make yourself vulnerable by logging onto =
an
IRC server. Here lately I have been using ssh to telnet to a very
unimportant shell account that I have and then run ircII from there.

I am really fascinated by encryption matters and am quite curious about =
the
encryption provided by Memo.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 23:47:23 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      IRC/LX
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Has anyone else tried IRC/LX? I can't seem to get it to connect to any
dal.net servers, but it seems to connect to all the other networks okay,
even Efnet which is kinda picky about some clients.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 19:38:53 -1000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Graham <bgraham@HAWAII.RR.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Graham <bgraham@HAWAII.RR.COM>
Subject:      Re: Quicken ??
Comments: To: Doug Devens <DDEVENS@AOL.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Doug - I enter all of my checking, cash and VISA transaction into
my HPLX as they occurr. Then  what I've been doing for years is
to extract these transactions monthly to a QIF file, one for each
account. Then move the QIF files to Quicken on my desktop and
import them into the respective accounts. I export them with
"Category Trip" and "Account" unchecked.

It has worked on all versions of Quicken from DOS to Quicken
2000. Works for me. If this is what you are trying to do but run
into problems let me know - I'll try to step you thru the
process.

Aloha - bob     \ooo_

---------------------------------------------------------
Date:    Tue, 16 Nov 1999 10:55:44 EST
From:    Doug Devens <DDEVENS@AOL.COM>
Subject: Quicken ??

In a message dated 11/16/99 12:01:47 AM Eastern Standard Time,
Colin Lambert
writes:

<< I use Quicken v6 and it imports pocket Quicken files fine. >>

I haven't been able to import Pocket Quicken into Quicken 6.0 for
Windows.
Are you using the DOS version or am I missing something? I create
an export
file from the palmtop, then try to import it to the desktop
version, which
says it is unable to open the file. TIA
Doug

        -------
<http://home.hawaii.rr.com/bgraham/>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 07:19:08 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Post/lx and downloading headers was:Re: Unsubscribe +WorldWar3
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 15 Nov 1999 17:56:04 -0800, A Meshar <sponsor@FTEL.NET> wrote:

> > Andreas if you are listning (or Avi) could you maybe have this in the
> > menu so we don'nt have to shell to dos to do this?
>
> You can undelete messages, including HEADERS, and then redo
> the action you wish. The undelete is in the Edit Menu.

Yes I could do that. But if you have ended post/lx and rerun post/lx
and then realizes that you need the messages downloaded again.. You
can't use the undelete function when you have rerun post/lx, you then
have to shell to dos.

I got a email from Andreas about this, he will maybe implement it in
the next version of Post/lx.

Thanks for your reply

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 07:19:11 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: POST/LX on desktop
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 15 Nov 1999 13:59:08 -0800, Hans Peter Staber
<hpstaber@COMPUSERVE.COM> wrote:

> A recent problem with my palmtop forced me to install POST/LX 2+ on
> my laptop.

I have a similar "problem"/setup.

> I use MaxDOS and PALRUN to call POST/LX in a WIN95 DOS box with >500kB lower
> memory availlable. In POST/LX this memory is ~140kB. I have two problems :

I just use palrun www.exe -d. I don't see the point in using maxdos on
your laptop..is there?

> 1) PE does not want to start when I want to compose messages (not enough
> memory)

Well I have not tried to run PE when in Post/lx. But I can run the
setup from the menus. I will try to run PE from within Post/lx to see
if I get problems..

> 2) I can't go online as the modem is not identified. WIN95 tells me
> that it is
> at COM2 and I have no problems running IE5 through this modem at COM2,
> 8N1 and
> 38200baud with AT&F as init string (I might try AT&FX3). However these
> settings
> in POST/LX don't work as I don't even get to initializing the modem.

Try to "move" your modem to com1. Or try to fix it so that the com port
is Com1. I think that this is the problem. Www/lx only supports
external modems on com1 (I am guessing here :-)

I get problems when I try to run www/lx on my _desktop_. I have 4
comports on my desktop. I have my modem connected to com1, but it will
not work.

On my _laptop_ it works, but I have only one com port on that machine. It
is com1 and actually connected to a special isdnphone I use as modem.

> Anybody using POST/LX on their desktop out there ?

Well I use it every day on my laptop. I use my hplx to read/write
emails/newsmessages. Then I insert the cf/pccard into my laptop and
connect to the internet with "full isdnspeed" (64kbps).

This is a very nice setup for me. The Hp limited cpuspeed does not
bother me when downloading/sending mails/news.

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 12:59:33 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steven Lawson <stevel@SDL.CONTINET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steven Lawson <stevel@SDL.CONTINET.COM>
Subject:      Re: WWW/LX access using calling cards
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

On 11-16 08:49am PST, you wrote:

> Sometimes it is just a matter of ignoring those various voice prompts
> and having the modem continue to dial but you may need to tweak the
> timing using commas and other delays to work around what tones are
> expected and when.  And that problem means experimenting, sometimes at a
> high cost depending on where you are located.  I think that is why so
> many people want to use their own cell phones.  Once you have tweaked,
> you are set.

Goin Postal handles this problem with calling cards via ";" in the
number/card/pin fields.  A ";" causes most modems to return to command
mode.  GP recognises this and pops up a continue prompt.  At the right
time, you hit Y and the next set of numbers is dialed.

The voice prompts ARE a pain in the butt though, especially when SOME
parts ignore the tones, and other parts can be interrupted.  I just bought
a WalMart/AT&T card.  Takes 4 popup prompts, and if you hit Y during either
of their "thank you for shopping at WalMart, blah blah blah" segments they
go right on yacking...  In fact, when you DO get through the entire
sequence, you STILL have to wait through more talk before they put the
call through.  Ugh.  Reminds me of the Simpsons episode where Homer calls
a "first minute is free" 900 line, then the person at the other end begins
speaking each... word...  really...  slowly...  :-)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 23:56:17 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Meyer <bmeyer@UNION-TEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Meyer <bmeyer@UNION-TEL.COM>
Subject:      Re: DOS emulator for WINCE
Comments: To: Alan Peres <aperes@MCS.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I'm trying to find this site. Anyone know the correct URL?

Bob

Alan Peres wrote:

> It is made by Paragon Technologies, whose web site is www.paragon.mda.de.

--
+--------------------+-----------------+
|Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
|bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
|Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
+--------------------+-----------------+
|   http://w3.union-tel.com/~bmeyer/   |
+--------------------------------------+

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 09:06:57 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin_Doering@MN.MAN.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Doering <Martin_Doering@MN.MAN.DE>
Subject:      Introduction
Content-transfer-encoding: quoted-printable
Content-type: text/plain; charset=ISO-8859-1
Mime-version: 1.0

Hi!

I'm new to the list and want to introduce myself:
I live near munich in germany, in the age of 32, system admin for HP-UX and
Oracle and exactly one week ago I bought a hp200lx=2E I mainly want to use this
device for pim activities and offline mail and news reading=2E And as I found,
it's very good for this - especially because of the wide 640x200 display=2E

Before I was owner of a palm-pilot, but this device was too limited for the
things I wantet to do with it - even I found, that the handling was easier=2E

I'm also new to C programming and hope, that the PAL Library is small enough,
that I will understand it=2E   ;-)

Also I would like to develope and (of course) use some PAL-Software on my NT
System=2E Has anyboy ported the Library to Win32?=20=


Additionally I'm looking for a good solution for getting my data in the NT
Clipboard=2E The CPack200 Software is DOS-based and has no such capabilities (as=20=
I
think)=2E


Have a nice time,

Martin Doering

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 09:34:16 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin_Doering@MN.MAN.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Doering <Martin_Doering@MN.MAN.DE>
Subject:      TCP/IP in DOS-Box
Content-transfer-encoding: quoted-printable
Content-type: text/plain; charset=ISO-8859-1
Mime-version: 1.0

Hi!

At work I have a NT 4=2E0 SP3 workstation=2E On this I can run HP 200 LX apps (PA=
L)
with help of palrun=2Ecom in (just) Fullscreen=2E Now I want to get a newsfeed fr=
om
our newsserver=2E I would like to use lxnntp for that, but in a dos box I can not
use winsock TCP/IP=2E Is there a possibility with (for example) an forwarding
packet driver for DOS-boxes to use the NT TCP/IP-stack?

Martin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 04:25:41 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Errormessages
Comments: To: Tomas Moberg <Tomas.Moberg@ABC.SE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thomas Moberg wrote:

" Error 65508?

Not enough memory!
Use maxdos, remove TSR or exit sysmgr."

Then my setup.exe program has crashed and I have no backup!


BTW,when considering your answer,is there any other TSR than sysmgr?=


Finally,where did you find out what this code meant?There should be=
 a little database,as a suggestion on SUPER,which explained all codes.


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 10:19:59 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Reinhard Mueller <molitor@01019FREENET.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Reinhard Mueller <molitor@01019FREENET.DE>
Subject:      Re: RPN calculator TSR
Comments: To: emkeefe@USWEST.NET
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Hi Ed,

On 11-16 11:30pm, you wrote

> Is there something about the built in Calc's RPN mode that
> you don't like? It has copy and paste from the results line
> and since it's a part of System Mgr, it's a TSR. For

No, nothing is wrong with the built-in calculator, but I am
working mostly outside systemmanager under Dos (resp. Maxdos).

> something more scientific, visit the SUPER site and search
> on Math and/or calc. There are now over three dozen math and
> calculator programs from which to choose.

As I said, I already downloaded "RPN" from Super, Now it would be
great if among all those calculators there was one with "RPN"s
functionality plus TSR. I thought someone can give me a hint,
before I'll have to download all available calculators and try
them.

cheers,
Reinhard



Goin' Postal - HP 100/200LX (v3.08) REGISTERED

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 10:22:11 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Reinhard Mueller <molitor@01019FREENET.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Reinhard Mueller <molitor@01019FREENET.DE>
Subject:      Re: Fluff
Comments: To: husk469@NETZERO.COM
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

On 11-17 03:13am, you wrote

> after my short rendezvous with a windows ce device I decided to come back
> to the HP200lx.

it's always the same

Goin' Postal - HP 100/200LX (v3.08) REGISTERED

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 06:59:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: 200LX for a journal
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Memo offers built-in encryption? How does it work??


Type something in Memo.  The press Menu File passWord and it will prompt =
you
for a password to save the file with.  The next time you try to load it, =
Memo
will ask for the password first.  I use this to store sensitive informatio=
n
like credit card numbers and passwords in a "secret" file.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 07:50:44 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, sponsor@FTEL.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      PLUS perhaps not a flop after all.
Comments: To: sponsor@FTEL.NET
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

 A Meshar  wrote:


"If you wish to draw that conclusion, fine, I would not make
such a leap, it is not exactly logical."

Why not?You said that the demo does not disconnect until the count of=
 bytes 16k is reached.That is,if I get errormessages before a disconnection=
 then it could not be due to the bandwidthlimit.


Anyhow we can stop this discussion about errormessages,because today=
 when I tried the demo again I didn't got a single  one,
I could open all the (same)pages I couldn't a couple of days ago.!?And=
 they downloaded fine,no problems at all.

It was the same when I tried the demo the very first time then I couldn't=
 even connect to internet,I got some strange errormessages about cannot=
 send headers,you remember I asked you about this.Next time I tried=
 it connected fine.

Perhaps the Plusversion first must be warmed up :-) ?

Plus seemed to work much smoother and quicker and better on internet=
 than WWW/LX 1.1.Ofcourse as you know I have had big problems with my=
 copy of WWW/LX 1.1 so my comparison is perhaps somewhat halting.


You still do not accept checks?

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 07:17:46 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: 200LX for a journal
In-Reply-To:  <199911162308.XAA01469@linux.zrz.TU-Berlin.DE> from "Daniel
              Hertrich" at Nov 16, 99 11:08:17 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> > I've been doing this for years with Memo and the built-in encryption it
> > offers.
>
> Memo offers built-in encryption? How does it work??

Go to FILE-PASSWORD and define it.  I'm embarrassed to say that I just
tried it out on my journal, and it's been so long that I forgot my
password.  I see from my copy of HPCRACK that it doesn't work on MEMO
or QUICKEN password protected files.  Just my luck.  I have no knowledge
of the adequacy of the encryption used by MEMO.

-Chris

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 07:20:39 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: DOS emulator for WINCE
In-Reply-To:  <199911170259.UAA08282x@scott.net> from "Jeff Johns" at Nov 16,
              99 08:59:52 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> > How does this apply to the HPLX?
>
> Many of the listmembers are forced to also use CE devices by their employers
> and I think it was an excellent post.

In addition, this is an HP-LX mailing list, and the HP WinCE devices
are technically HPxxxLX machines.  Admittedly this list focuses on the
95/100/200/700/1000 series, but I wouldn't criticize someone for posting
about a 620LX.

-Chris

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 07:23:09 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: 200LX for a journal
In-Reply-To:  <WSYyOK5oNGpaXzzCT3GvrsrtzYu5@4ax.com> from "Curtis Cameron" at
              Nov 16, 99 10:00:53 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Curtis:

> I had never noticed that Memo offers encryption, but I just looked,
> and it sure does. It's only available for non-ASCII files.

I never noticed that my journal was non-ASCII.  (ummm, since I can't
open it now, I can't check).  I guess it really doesn't matter, because
the resulting file is encrypted gibberish.  But I thought there was a
provision whereby I could save a copy of it in ASCII, un-encrypted form.

-Chris

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 07:08:22 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Meyer <bmeyer@UNION-TEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Meyer <bmeyer@UNION-TEL.COM>
Subject:      Re: RPN calculator TSR
Comments: To: Reinhard Mueller <molitor@01019FREENET.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I thought I had two sites but just find one for emulators. Try this site
for an HP41 emulator. Don't think it works as a TSR.

http://www.geocities.com/SiliconValley/Bay/4919/

Bob

Reinhard Mueller wrote:

> Hi,
>
> does anyone know about a RPN calculator for DOS which can be
> loaded tsr and activated by hotkey? I downloaded "RPN" from Super
> and I like it very much, but I am missing TSR-functionality. It
> would also be great if the results could be stuffed in the
> keyboard buffer after exiting the calculator.
>
> Cheers,
> Reinhard
>
> Goin' Postal - HP 100/200LX (v3.08) REGISTERED
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
+--------------------+-----------------+
|Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
|bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
|Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
+--------------------+-----------------+
|   http://w3.union-tel.com/~bmeyer/   |
+--------------------------------------+

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 09:20:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: DOS emulator for WINCE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Wed, 17 Nov 1999 09:15:18 -0500 (EST)

Technically speaking, the post should have been prefaced by WINCE: in
the subject. As long as WinCE posts are labeled w/ the WINCE TOPIC,
they are welcome here.

- BTW if you would not like for receive WinCE posts, send a message to

        LISTSERV@UCONNVM.UCONN.EDU

With a message body:

        set topics -wince



54m39s ago ...
On Wed, 17 Nov 1999, Chris Lott wrote:

> > > How does this apply to the HPLX?
> >
> > Many of the listmembers are forced to also use CE devices by their =
employers
> > and I think it was an excellent post.
>
> In addition, this is an HP-LX mailing list, and the HP WinCE devices
> are technically HPxxxLX machines.  Admittedly this list focuses on the
> 95/100/200/700/1000 series, but I wouldn't criticize someone for =
posting
> about a 620LX.
>
> -Chris
>
> --
>
> ************************************************************************
> R. Christopher Lott, P.E.                                  rclott@ro.com
> Alpha Beta Technologies, Inc.
> Huntsville, Alabama
> ************************************************************************
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 15:26:04 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: 200LX for a journal
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 16 Nov 1999 04:16:52 -0800, Steve Carder <S_Carder@COMPUSERVE.COM> wrote:

> > one use of my lx is to write my diary, not just for myself, but for my
> > future children
>
> I have begun doing this with my palmtop.  I have found PE and PIM a good
> combination for a journal.  I have always had an interest in keeping a journal,
> but never managed it until I hit on this combination.
>
> Steve Carder

Mee too, but I have made a database with the fields I want. Date/time.
Subject, keyword and a notesfield..

I sort on the datefield.

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 15:26:05 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Undetermined address/swede mixup was:Re: Post/lx and downloading
              headers
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 16 Nov 1999 06:23:08 -0800, Undetermined origin c/o LISTSERV
administrator <owner-LISTSERV@UCONNVM.UCONN.EDU> wrote:

> Martin wrote:
>
> "Almost all messages you post have Tomas Moberg as the sender,
> but some of them have the above as sender why? Do you send the
> messages to thelist.hplx at the newsserver or to the mailaddress hplx
> list?"

My mistake I mixed you swedes together I meant to say "..you post have
_Lars Hedstroem_ as the sender. My question is the same though.. Why do
the server assign a "Undeterined origin" sometimes?

> Ever since I subscribed to this mailinglist my emails have been haunted.
> Sometime people who send me emails get them back or
> they go to somone else,old emails suddenly shows up etc.
> I have no idea how my post could possible have Tomas Moberg as sender!
> But if I recall right so had also Tomas Moberg in Upsala some remarks
> about my emails,nevertheless I have forgotten what he said.

Cool down :-)) I do not want to make it more complex than it is.. but I
mixed you guys together.. I have not had any problem in sending you
email offlist about Webuy.. I think you have a very "hard to remember"
emailaddress though. Is it possible to have a alias?

> I send all my emails to the list to its real adress and not through
> any newsservers.

Okey I see..

> I have discussed this problem with the supportguys behind this list
> but as all supports they say that the failure must be somewhere else...:-(

I do not know much about where the problem is, but it seems that the
maillistserver does not know where the mail is coming from. Therefor my
guess is that it is a problem at you isp..only a guess..

> I also doubt that I would be the only person having this problems on the
> mailinglist!?

I have not seen it before..

> Anyhow I always write Lars Hedstroem/Sweden after my emails,so if this is
> written I am the writer no matter who is the sender.

My mistake..I should have noticed that..sorry

> You continued:
>
> "I do not know. I have only tested the 2.2 version.. Somebody
> else haveto answer this one.Why don'nt you just get a license on the
>  new version. "
>
> Well I don't want to buy the pig in the poke,I have downloaded the demo and
> yesterday I atleast got the emailclient to work.
> Do you ever have problems with 2.2 when downloading pages on internet,i. e.
> get the errormessage:"Problem recieving data,cannot create file"?

I do not use www/lx with hv sorry. I only use post/lx for email/news.
I have seen the errormessage though..I think I get this (or a similar
message) when I have created a folder/emailbox and the directoryname
is written wrong.. example I create a new mailbox. I download emails
to it and post can't find it because of wrong dir name.

I must say that I prefer Post/lx compared to any other
emailprograms..Its a very nice product and maybe the best software that
I have paid for..

> " I am not interested in football at all.."
>
> Not so "normal" :-))

I feel a little unnormal.. I am the only one of my friends that feels
this way..:-)) But my brother feels the same way..I guess we are both
crazy?

>
> "under the influence of alcohol"
>
> Very normal:-))

:-))

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 15:26:07 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Strange error message when sending email withh post/lx
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 16 Nov 1999 06:23:11 -0800, Lars Hedstroem <nxw988e@TNINET.SE> wrote:

> Martin wrote:
>
> "I have problems with sending some mails.. I compose messages
> asusually..The messages have no attachments of any kind. They "look"normal. Nosig _attachments_ either..When the messages are sent sometimes one email does not getsent and I get
> this:"Failure message not sent, file to include not found"
> What is wrong. I have tried to cut/paste the message body into"
>
> Did you get any answers on this question?I had the intention to answer you
> as I occasionally have the some problem,though with other errormessages,but
> my ISP closed me down for a week so I
> haven't had neither possibility nor time to bring this question up until now.

Andreas replied offlist. He has never seen this errormessage. It has
not happened again so we concluded that it was a "cosmic magnetic once
in a lifetime error" :-)) Serious no we could not find anything wrong
anywhere. I still can't send the message in question.

Please feel free to post any errormessages that you get. I am sure to
have seen it sometime before :-))

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 15:26:08 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: FLUFF:Nokia 9110 Communicator
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 16 Nov 1999 13:14:50 -0800, Lars Hedstroem <nxw988e@TNINET.SE> wrote:

> Hello Martin!
>
> I have found the article about the Nokia mobilphone with a foldup screen.
>

> The phone was NOKIA 9110 Communicator and it really looks heavy!!It
> weighs 253g,backlit screen(the size looks to be about as big as the
> LX's) , loudspeaker, pictureviewer, emailing, fax,calendar,SMS,
> notetaker etc

Ahh the 9110.. I should have know that it was this you talked about.

The 9110 is actually a very nice phone/organizer. I have just tried it
for a couple of minutes. Its actually very light in weight. The size is
like a Nokia 2110 phone. The screen is smaller than the Hplx. I have
not tested its software though. I used a 9000 for some time. It was
okey, but it did not have the flexebility like the hplx. The 9110 is
the same I think. You can't run anything else than special software on
it. No dos application.

It was not something that I could be satisfied with now that I have a
hplx, but great for others that have not discovered the hplx :-))

> You can read (and look)more yourself on www.nokia.se or perhaps even
> better www.nokia.no

No need :-) but thanks

> Strange that the Finns could build such a phone,if it had been the
> swedish concern Ericsson I wouldn't be surprised:-))

Its very nice actually. The 9000 communicator was a bit bulky, but this
new 9110 is very small/light and have all what a buisniss man wants (I
think :-)..

> The price I don't know but it looks expensive.

Nah don't think it is so bad actually. A friend of mine bought one and
he paid about 6500,- Nok for it. Tjat is not bad..

> If you find out what OS it has-inform me.

I think it runs Geos or something. The next communicators frrom Nokia
will run Symbian or something. Psion/Ericsson/Nokia are working
together to develop the Epoc os some more..

I will stay with my Hplx and a external phone..

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 15:26:10 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: FLUFF:Nokia 9110 Communicator
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 16 Nov 1999 13:15:28 -0800, Stephan Goeldi <stephan.goeldi@datacomm.ch> wrote:

> >I have found the article about the Nokia mobilphone with a foldup screen.
>
> >The phone was NOKIA 9110 Communicator and it really looks heavy!!
>
> Think of the HP LX 700 (OmniGo) with the Nokia 2110 plugged in.
> It is nearly the same, except, that the 700 LX is 200 LX compatible.

I agree somehwat. But if you are not "into" the hplx, you could go for
the 9110. It is very light compared to a Hp700/2110 combo. I compared
them in size and weight. I have not tested the 9110's application. But
from what I hear its sufficient.. but I do not think that it is a
something that a hplx user could be satisfied with..

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 16:27:45 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Franklin Eekhout <franklin@ONLINE.NO>
Subject:      Re: Nokia 9110 Communicator

> not tested its software though. I used a 9000 for some time. It was
> okey, but it did not have the flexebility like the hplx. The 9110 is
> the same I think. You can't run anything else than special software on
> it. No dos application.


I have a friend who has (had, got stolen I heard today) a 9110. It runs
GEOS, so there is a fair amount of software to try, and there is some amount
of SW portability between GEOS implementations. Database, text, paint, cad,
etc. One can run GEOS in a window on a W95/98 pc too. It syncs with Outlook.
I think GEOS is a smart, lightweight system. The limiting factor is the
phone. No CF slot or standard serial port! Stupid. Otherwise it is a
386(486?) based hardware design which is good. GEOS should really be able to
compete in the GUI world, it has a lot of modern day OS design from what I
read about it. I'm a non-programmer, so take the last with a pinch of salt
and check yourself. If this Morphy One ever got realised then GEOS would be
great on it. Linux is ok, but for the masses...

The internal apps work ok for my friend who is a tech support guy with a lot
of stuff going on outside work. He had a PalmPilot, but ditched that for the
Nokia. It meant one thing less to carry. Basically PIM stuff. We tried VNC
on it, at long last he managed to get it going and was controlling his work
wintel pc with the 9110! Gives one a rush to see the Start button on a
9110... :-)

But no CF-slot! What a lame descision. That removed it completely from the
database oriented market. Now it's just a simple PIM telephone. And the
cable has level converters for RS-232. Pity. I don't like the design of the
top part of the phone though, I would prefer it to be straight. It looks
silly now. Marketing folks had a go at it, I suppose.

But the LX is a small computer, so it really has no competition from the
9110. Now if it had a CF-slot and standard serial port, DS-upradebility,
internal RAM upgrades etc, then that would be a different matter!

www.newdealinc.com for GEOS.

br

Franklin
(Who ran GEOS on a C64 in the old days...)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 07:31:40 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@YAHOO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@YAHOO.COM>
Subject:      Re: Fluff
Comments: To: Ashwin Balan <husk469@NETZERO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

welcomme back

Remember me?
Told ya it'd be a waste of time
Why reinvent the wheel?

Some ideas are better than others :)

Buy a Pentium 686/99 so you can reboot faster....
Computers mak very fast and accurate mistakes.

> after my short rendezvous with a windows ce device I decided
> to come back
> to the HP200lx.
>

__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 07:16:34 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Introduction
Comments: To: Martin_Doering@MN.MAN.DE
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Hi Martin, and welcome to the list.

If you ever find a good solution to getting data in your NT clipboard, let us
know, as that would be useful for me also.

As it is, most applications on the LX will export to a text file, so I usually
write PC-bound text to the same scratch file everytime (ie, c:\a.txt), upload to
the same PC file each time (using Cpack or Transfile), then open it with Notepad
and grab the text from there into the Clipboard.

Workable, but a cleaner solution is always appreciated.

- Longden





Martin Doering <Martin_Doering@MN.MAN.DE> on 11/17/99 12:06:57 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Martin_Doering@MN.MAN.DE

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Introduction





Additionally I'm looking for a good solution for getting my data in the NT
Clipboard. The CPack200 Software is DOS-based and has no such capabilities (as I
think).

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 11:23:11 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
Comments:     RFC822 error: <E> Unmatched parenthesis in address field.
Comments:     RFC822 error: <E> Unmatched parenthesis in address field.
From:         Undetermined origin c/o LISTSERV administrator
              <owner-LISTSERV@UCONNVM.UCONN.EDU>
Subject:      Re: Undetermined address/swede mixup was:Re: Post/lx and
              downloading headers
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Martin wrote:

"My mistake I mixed you swedes together. My question is the same
though.. Why dothe server assign a "Undeterined origin" sometimes?"

Only God knows :-))

"Cool down :-)) "

OK,I'll try to reduce my intake of amphetamine :-))


"I think you have a very "hard toremember"
emailaddress though."

Yes I know,I hardly remember itself:-) (nxw988e@tninet.se)

"Is it possible to have a alias?"

You mean at my ISP???


"Therefor my
guess is that it is a problem at you isp..only a guess.."

Could be,but the question is whose ISP,Thomas' or mine?We haven't the=
 same.


"I do not use www/lx with hv sorry. I only use post/lx for
email/news."

So you never surf the net with your LX?

Lars Hedstrom/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 11:23:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill A <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Strange error message when sending email withh post/lx
Comments: To: Martin Bergvill A <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

 Martin wrote:

"Andreas replied offlist. He has never seen this errormessage.
It has not happened again so we concluded that it was a "cosmic
magnetic once in a lifetime error" :-)) Serious no we could not find=
 anything wrong anywhere. I still can't send the message in question."

If I send 100 emails one behave just like you said,the sending just=
 stops and nothing more happends until it times out;I do not get any=
 errormessages..
If I try to send it again the same thing happends.I also have tried=
 to cut and paste to a memofile and then tried to send that one but=
 that didn't go either.

But one time I tried to cut and paste the email in two halves and then=
 one was possible to send away but not the other one.(This was a quite=
 big email,and to rewrite it wasn't so funny) I did the same again,cut=
 the remaining half in two halves with the same result,one was possible=
 to send the other not.

It is just as some form of combination of keystrokes in the email could=
 make this happen,and just that keystrokecombination stops the sending.I=
 have no better solution.



Lars Hedstrom/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 17:56:18 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin_Doering@MN.MAN.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Doering <Martin_Doering@MN.MAN.DE>
Subject:      PAL Library Developement!
Comments: To: 100114.3146@compuserve.com
Content-transfer-encoding: quoted-printable
Content-type: text/plain; charset=ISO-8859-1
Mime-version: 1.0

Hi!

I'm owner of a newly buyed HP 200 LX and would like to try out some
developements for it in C language=2E I found the PAL Library, but it seem's, tha=
t
developement of it has stuck?!? Am I right?

Has anybody ever tried to port PAL to another system, say Linux or Win32, so
that some could run these programs on another platform?


Regards,=20=


Martin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 16 Nov 1999 22:58:03 -0800
Reply-To:     dcollins@trendx.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Donald Collins <dcollins@TRENDX.COM>
Subject:      Re: Remote connection with Filer and a modem?

I've done it.  Tried to setup my PC to be a BBS for my LX.  I thought it
would be a great way to access data while away from the office.

The connections were unreliable.  Sometimes my PC would connect,
other times not.  Once in a while my PC would just hang.

The times it did work were great!  Using Filer to get files from my PC was
much like WinFTP.

If you get it working, let us know the settings.

Don.

Fryday writes:
>
> Anybody tried this, and can give me a hint?
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 09:22:17 -0800
Reply-To:     dcollins@trendx.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Donald Collins <dcollins@TRENDX.COM>
Subject:      Re: DOS emulator for WINCE

Will that command filter out the following:

Subject: Wince  (no colon)
Subject: OT: Wince
Subject: RE: Wince:
Subject: FS: Wince

I find that -fluff doesn't stop most of the fluff msgs either.
Is there a way to make the filter smarter?

Don.


Al Kind writes:
> - BTW if you would not like for receive WinCE posts, send a message to
>
>         LISTSERV@UCONNVM.UCONN.EDU
>
> With a message body:
>
>         set topics -wince

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 13:23:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: RPN calculator TSR
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Reinhard,

> As I said, I already downloaded "RPN" from Super, Now it would be
> great if among all those calculators there was one with "RPN"s
> functionality plus TSR. I thought someone can give me a hint,
> before I'll have to download all available calculators and try
> them.

Check EXMBatch on SUPER to "convert" DOS program to "EXM".


HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 18:35:26 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: POST/LX on desktop
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Try to "move" your modem to com1. Or try to fix it so that the com port
> is Com1. I think that this is the problem. Www/lx only supports
> external modems on com1 (I am guessing here :-)

Here's my Win95 DESKTOP www/lx setup for COM2 (oh, and it works! (g)):

ATT
Port=2
Baud=38400
FIFO=1
;IPCPcomp=1
Modem=1
HTTP=1.0
PPP=1
Login=999999999@worldnet.att.net
;ATTENTION: password is encoded!
Password=abcdefghijklmnop
ModemInit=ATZ
;Dial=ATDT382-0108
Dial=ATDT695-4901
DNS_IP=204.127.129.1
DNS2_IP=204.127.160.1
Script=CHAP_Script
OmniGo=0
My_IP=0.0.0.0

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 10:42:26 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      Re: Appointment Book / Todo structures
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>My ToDo looks like this (the number is the priority I set):
>0 ---------- urgent and important ----------
>1 pay the milkman

the problem i assume with this method is having to pg-down all the time to
reach the todo to delete

appointment book does not support first letter scroll downs, as do phone and
notes

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 19:42:07 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      200LX for a journal
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Dr. Carder wrote:
>I have found PE and PIM a good combination for a journal

i am super careful not losing anything i wrote, so

1. i use phone notes (F3) to write the journal, opening it with a macro
putting the curser at the end of the file. After each entry i run a macro
which exports the contents into a file on drive A and exits with F10

2. i keep headers and copy them to a "key" file to find important journal
entries in the files quickly - since 1970

3. when the file is 20-30k big i open it with LE.exe and remove the hard
returns and zip it down to half size ... and start a new file

my 2c

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 14:04:34 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      FLUFF:Nokia 9110 Communicator
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Franklin wrote:

"But no CF-slot! What a lame descision. That removed it
completely from the
database oriented market. Now it's just a simple PIM telephone."

We haven't seen Motorola's Philip's or Ericsson's answers yet.  They=
 will certainly launch similar models.

Furthermore,this is the first phone of that kind.Wait a couple of years=
 and I think we will see both CF-slots and serial ports and much more,perha=
ps even a little webcamera.

Finally,why did you remove the fluff from the subjectfield?
We must try to stick to the rules,don't give the anti-fluffers added=
 force to their arguments,writing fluff in the subjectfield is the best=
 way to disarm them.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 10:32:58 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      Re: Filer backup
Comments: To: Longden_Loo@candle.com
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> I just tried it on my LX and all files and subdirectories (and their
files) were
> copied correctly from C: to A:\TMP

thank you for trying

> 2) On the Backup Files panel, you have the "Modified files only" box
unchecked.

why would i leave this unchecked when i want to copy all files which i
modified? isn't that the purpose of my backup efforts?

> You can try commenting out a TSR at a time (add "rem" to the front of the
line
> in autoexec.bat/config.sys)

config.sys reads "rem" too? (didn't know)

> Such is life in the DOS world.

Hmans are clumsy lumps of biotechnology, evolved by our mindless genes
simply to make more copies of themselves. From a computer's perspective, we
are inconvenient but necessary go-betweens in the evolution of better
computers.

Nathalie in a human world (any fluff please off-list)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 14:27:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Fluff: Re: DOS emulator for WINCE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> I find that -fluff doesn't stop most of the fluff msgs either.
> Is there a way to make the filter smarter?

I think that part of the problem is that although many fluff
messages do have "Fluff" at the start of the subject line
and are successfully filtered out, when the message is
replied to, most mailers add an "Re:" to the beginning of
the subject line. This is probably why quite a lot of fluff
gets past the filter... but I could be wrong, having never
actually used the filter!

If that is the case, however, then perhaps there is a way of
improving the filter...?

 -Mike http://games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 11:33:26 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: DOS emulator for WINCE
Comments: To: Bob Meyer <bmeyer@UNION-TEL.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 16 Nov 1999 23:56:17 -0700, Bob Meyer <bmeyer@UNION-TEL.COM> =
wrote:

> I'm trying to find this site. Anyone know the correct URL?


Hi Bob,

XT-CE

It is a PC emulator allowing you to run DOS and many DOS applications, =
however
it doesn't emulate DOS, so you must provide your own (like a real PC).

See the XTCE website for more details:

http://www.xt-ce.com

Note: The demo comes with CE DOS and has info. on how to buy.



HTH



Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 11:20:01 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Filer backup
Comments: To: Nathalie Bugeaud <tps-seti@wanadoo.fr>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>> 2) On the Backup Files panel, you have the
>>"Modified files only" box unchecked.

>why would i leave this unchecked when i want
>to copy all files which i modified? isn't that
>the purpose of my backup efforts?

It actually works either way.

Unchecking the "Modified files only" just ensures that ALL files are copied, and
it wasn't clear from your original post what your exact intent was for backup.
Copying all files is a FULL backup, whereas copying just modified files is an
INCREMENTAL backup.

In either case, (Modified box checked or unchecked), it worked for me.  All
files in my source drive (ie, C:\) that had its archive bit set (which can be
verified in DOS using "dir /aa") were copied, even those in subdirectories (with
the exception of hidden files, as noted earlier by Jeff).

Perhaps you can verify (using xtreegold or "dir /aa") whether the file(s) in
question that aren't being copied, do in fact have that archive bit turned on.

- Longden (a fellow clumsy lump of biotechnology)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 19:32:35 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Reinhard Mueller <molitor@01019FREENET.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Reinhard Mueller <molitor@01019FREENET.DE>
Subject:      Re: PAL Library Developement!
Comments: To: Martin_Doering@MN.MAN.DE
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

>
> Has anybody ever tried to port PAL to another system, say Linux or Win32, so
> that some could run these programs on another platform?

I think PAL was developed to provide access to lx-specific
features (like eg. battery control, fonts etc.) plus to replicate
the look and feel of the lx-GUI. So does it really make sense to
port it to other platforms?

And btw. you can run PAL applications under Windows anyway. That's
great for developing and testing PAL-apps on the desktop, but they
still run best on the lx.

cheers,
Reinhard


Goin' Postal - HP 100/200LX (v3.08) REGISTERED

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 14:14:12 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: PAL Library Developement!
In-Reply-To:  <E11oBQM-0001yb-00@mx1.01019freenet.de> from "Reinhard Mueller"
              at Nov 17, 99 07:32:35 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> I think PAL was developed to provide access to lx-specific
> features (like eg. battery control, fonts etc.) plus to replicate
> the look and feel of the lx-GUI. So does it really make sense to
> port it to other platforms?

I think it would.   Just my $0.02 worth....

-Chris Lott


--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 15:45:14 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      MacLink+ /HP Palmtop launch from AppMgr or X-Finder
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

I know there are not very many of us on this list who are working with both Macs
and palmtops - and probably fewer who use the now-discontinued MacLink+ /HP
Palmtop to transfer and translate files. But I have confidence that the
distributed intelligence here can answer a question about serial ports.

The MacLink server application for the palmtop (mlphp.exe) connects properly
when launched from Filer on a 100LX or on a 200LX. It also connects properly
when launched from AppMgr on a 100LX, but fails and eventually times out when
launched from AppMgr on a 200LX.

I assumed that AppMgr in the 200LX might be forcing the serial port off, but it
still fails when launched from AppMgr via this batch file:

d:\bin\serctl /w
a:\maclink\mlphp.exe
d:\bin\serctl /o

It also fails on a 200LX when launched from X-Finder.

It seems that something in this setup must have changed in the time between the
100LX and the 200LX. Any ideas what this change might be, and how I might work
around it?

Thanks in advance,
Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 13:01:13 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: hp200lx hardware site?
In-Reply-To:  <199911161002.LAA01515@d1o14.telia.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 16 Nov 1999, Tomas Moberg wrote:

> What is the addres to the HP hardware compatibility site. I remember
> there was a site that collected info on compatible gadgets.

http://db.hplx.net

I don't know how updated or complete it is, though.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 13:26:15 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Who do you have a Hornet chip information?
In-Reply-To:  <003928C86BDDD211BC8000A0C98A612981963A@SWC>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=ISO-8859-1
Content-Transfer-Encoding: QUOTED-PRINTABLE

On Wed, 17 Nov 1999, euc-kr =B9=E9=C3=A2=B1=D4 wrote:

> I am plannig the 32M memory module DIY. But, I don't have a Hornet
> chip data sheet. Who do you have a Hornet information?

Nobody has one.  HP itself claims that they either don't have the data
sheets anymore, or that they are a closely guarded secret and they refuse
to acknowledge that they exist.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 22:19:02 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Cristian Rigamonti <bigamons@FREEMAIL.IT>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Cristian Rigamonti <bigamons@FREEMAIL.IT>
Subject:      Trembling lid...
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

I've noticed that the lid of my palmtop (when in the OPEN position) has
started to tremble, very lightly, near the left side of the hinge.

I removed both hinge-caps (never did before!) and found that there was a
slight play in the left hinge, that caused the movement (the right hinge
was firm indeed). So I placed a little strip of paper around the hinge, to
fill the (almost invisible) "gap", put the cap back and the trembling has
substantially reduced (almost disappeared!).

After all, the thing was not so scary, but I wonder if anyone else has
experienced this (and how (s)he has dealt with).

Cri

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 22:34:18 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: Who do you have a Hornet chip information?
In-Reply-To:  <Pine.LNX.4.10.9911171325420.14043-100000@hplx.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 17 Nov 1999, David Sargeant wrote:

> Nobody has one.  HP itself claims that they either don't have the data
> sheets anymore, or that they are a closely guarded secret and they refuse
> to acknowledge that they exist.

Do I smell a cover up? Perhaps the x00LX is based on alien technology?!?:-)

Anyway, since there are already 32MB upgrades on the market, I strongly
assume you can do it without the datasheets, given enough time...


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 13:48:53 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Who do you have a Hornet chip information?
In-Reply-To:  <Pine.HPX.4.20.9911172231370.7566-100000@ask.diku.dk>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 17 Nov 1999, Laust Brock-Nannestad wrote:

> Anyway, since there are already 32MB upgrades on the market, I
> strongly assume you can do it without the datasheets, given enough
> time...

Yes.  A little testing can usually find out what you need.  That's how we
worked out the control pin to use for the backlight on/off signal.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 15:37:36 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Postcard
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Did I mention that I received a postcard from a guy in Toyko that I =
emailed
a copy of Stereo Shell to the other day? Believe it or not the only =
address
he used was that which is in my sig line and it actually found it's way =
from
Tokyo to the sheriff's department even without a zip code.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 15:39:17 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Who do you have a Hornet chip information?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Wed, 17 Nov 1999 22:34:18 +0100, Laust Brock-Nannestad <laustbn@DIKU.DK=
> wrote:

> Do I smell a cover up? Perhaps the x00LX is based on alien technology?!?=
:-)

I knew it!!!!!!!

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 16:05:31 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Theodore Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Theodore Heise <theise@NETINS.NET>
Subject:      Re: Who do you have a Hornet chip information?
In-Reply-To:  <Pine.LNX.4.10.9911171325420.14043-100000@hplx.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 17 Nov 1999, David Sargeant wrote:

> Nobody has one. Hornet chip data sheet
> HP itself claims that they either:
>    1) don't have the data sheets anymore, or
>    2) that they are a closely guarded secret and they refuse
>      to acknowledge that they exist.

...and they're not sure which it is?

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 14:19:36 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Who do you have a Hornet chip information?
In-Reply-To:  <Pine.OSF.4.02.9911171603160.4583-100000@worf.netins.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 17 Nov 1999, Theodore Heise wrote:

> ...and they're not sure which it is?

Depends who you talk to.  I've heard both stories.  It's an Intel chip,
though ... I wonder if Intel has datasheets available or if they made it
just for HP.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 15:59:43 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Andrew King <kinga@IIT.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Andrew King <kinga@IIT.EDU>
Subject:      MAC PIM applications that read 200LX data?
In-Reply-To:  <380315B10005D4FF@email.iit.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Hello
I actually have the MacLink package and have had no problems getting the
data onto my wifes MAC powerbook 520.
My problem is what to do with the data once it is there.
I would like to find a MAC PIM program that would provide calender and
phonebook information using the 200LX data.
Anyone doing this out ther?

BTW no complaints about OT/FLUFF. Although I prefer the (simple) technical
stuff the value of what I like is such (and the price is right) that I
couldn't complain about the off topic posts.
I am amazed that you all can do so much with your palmtops, I can barely
keep up with the list let alone implement a even a fraction of the good
ideas I see here.

Andrew King
IIT Physics
Chicago 312-567-3021
technology is the answer,
what was the question?

Date:    Wed, 17 Nov 1999 15:45:14 -0500
From:    Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject: MacLink+ /HP Palmtop launch from AppMgr or X-Finder

I know there are not very many of us on this list who are working with
both Macs and palmtops - and probably fewer who use the now-discontinued
MacLink+ /HP Palmtop to transfer and translate files.
Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 16:13:38 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Theodore Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Theodore Heise <theise@NETINS.NET>
Subject:      Re: Trembling lid...
In-Reply-To:  <3.0.6.16.19991117221902.3f4fb410@students.uni-bocconi.it>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 17 Nov 1999, Cristian Rigamonti wrote:

> I removed both hinge-caps (never did before!) and found that there was a
> slight play in the left hinge, that caused the movement (the right hinge
> was firm indeed). So I placed a little strip of paper around the hinge, to
> fill the (almost invisible) "gap", put the cap back and the trembling has
> substantially reduced (almost disappeared!).


Hi Cri,

I've had the same play in my left hinge.  It's sort of bothered
me too, so I just slid a piece of tape in the gap.  Same result,
the play is gone.  I'll see how it goes--suppose the tape could
slip into the hinge and cause problems, but I think it'll be OK.

Thanks for the idea!

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 16:17:18 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Theodore Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Theodore Heise <theise@NETINS.NET>
Subject:      Re: Who do you have a Hornet chip information?
In-Reply-To:  <Pine.LNX.4.10.9911171419030.15684-100000@hplx.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 17 Nov 1999, David Sargeant wrote:

> > ...and they're not sure which it is?
>
> Depends who you talk to.  I've heard both stories.

Doesn't inspire great confidence in HP, does it?

Ted

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 16:18:29 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Theodore Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Theodore Heise <theise@NETINS.NET>
Subject:      Re: SysMgr and AppMgr
In-Reply-To:  <199911171904.NAA07869@ins21.netins.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 17 Nov 1999, Lars Hedstroem wrote:

> Thanks for your instructive explanation.


You're most welcome.  I've gotten a great deal of help from
this list--it's nice to be able to reciprocate.

Ted

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 14:53:31 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Who do you have a Hornet chip information?
In-Reply-To:  <D93F6C7E48@vbbusnw1.tc.cc.va.us>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 17 Nov 1999, Peter W. Borders wrote:

> I thought the Hornet was made by AMD? Also, if I remember correctly
> the Lexmark MiniBook 10 and MiniBook 15 used this same chip. Maybe
> someone at LexMark or IBM could find a datasheet?

It's definitely made by Intel; there's a large Intel logo on it.  Check
out this picture:

http://www.hplx.net/david/board.jpg

You can make out (barely) the Intel logo and name.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 17:51:33 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Cgldent@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Colin Lambert <Cgldent@AOL.COM>
Subject:      Re: Quicken ??
Comments: To: DDEVENS@aol.com
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Yes I use Quicken 6 for DOS.
CL

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 17:36:08 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Malka <malkajef@ORTHOHELP.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Malka <malkajef@ORTHOHELP.COM>
Subject:      Re: html editor for the hplx
Comments: To: S_Carder@COMPUSERVE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I own Quick/LX and agree it is worth the money.

Where specifically is the colleection of HTML editing items for Quick/LX?

Thanks.

Jeff Malka <malkajef@orthohelp.com>
----- Original Message -----
From: Steve Carder <S_Carder@COMPUSERVE.COM>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Saturday, November 13, 1999 6:34 PM
Subject: Re: html editor for the hplx


> Oops -- you're right, looks like they're not there.  Maybe I heard
> about the macro set on the list... Or maybe I hallucinated it  8->>

There is a collection of HTML editing items for Quick/LX.  You could use
this
with PE to easily add various HTML tags, ut you have to buy Quick/LX first
<g>.
 I think Quick/LX is well worth the money.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 18:03:33 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Victor Roberts <robertsv@IX.NETCOM.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Victor Roberts <robertsv@IX.NETCOM.COM>
Subject:      Re: Speed upgrade
Comments: To: al chin <hobchi@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Is this question directed to me? If so, how do I do what? Not
load the drivers, or keep the screen from being blurry?

To not load the drivers you can REM the driver out of your
config.sys file or press ALT during a boot and choose boot
without the startup files.

To get a non-blurry screen without the driver, you just have to
be lucky, I guess. <g>  This seems to be a characteristic of my
200LX. BTW - I do use the driver for normal operation. It is
just that I noticed that my screen was just fine when I booted
without the startup files as a test.

Vic

On 2 Nov 1999, al chin <hobchi@JUNO.COM> wrote:

> How do you do that???
>
> Semper mobilis,
> yor pal al :-) .............
>
> ><fjkaufman@WORLDNET.ATT.NET> wrote:
> >
> >> Battery life - pure and simple.  And keeping it pure and simple:  No
> >> drivers - no blurry screen.
> >
> >The screen on my new 200LX DS is not blurry even if I do not
> >load the 2X driver.
> >
> >Vic
> >
>
> ___________________________________________________________________
> Get the Internet just the way you want it.
> Free software, free e-mail, and free Internet access for a month!
> Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 00:00:03 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, BOCHE@DE.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ulrich Boche <BOCHE@DE.IBM.COM>
Subject:      Re: 200LX for a journal
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

The encryption algorithm used with MEMO is different from the one used
with the database engine, because the HPCRACK program that is able to
decode the database passwords fails with MEMO. However, there is
reason to believe that the encryption algorithm is not stronger than
encryption with a 40-bit key: at the time the HP 200 LX was released, the
US Government wouldn't have allowed crypto products with stronger
encryption to be exported without an export license.

Ulrich Boche

Curtis Cameron <curtc@AIRMAIL.NET> wrote:

>>I had never noticed that Memo offers encryption, but I just looked,
>>and it sure does. It's only available for non-ASCII files. I'm very
>>familiar with the encryption scheme for .?DB files, and I'm sure it's
>>something similar with these DOC files, but I wasn't able to figure it
>>out in the time I looked at it.

>>My guess is that probably no one outside the LX development staff
>>knows how it's encoded (yet), so your data should be safe for most
>>purposes. However, it certainly wouldn't withstand a sustained attack.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 00:08:06 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, BOCHE@DE.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ulrich Boche <BOCHE@DE.IBM.COM>
Subject:      Re: Encryption & IRC was Re: 200LX for a journal
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

RSA encryption with a 1024-bit key length is definitely not crackable today and
will
remain so at least for the next 5 - 10 years. This does not only include the
average
hacker, but also organizations such as the NSA. The same is true for symmetric
encryption algorithms such as TDES or RC4 with a key length of 128 bits or
longer.

Ulrich Boche
EMEA Security Technical Consultant
IBM S/390 Technical Support (OS/390 + e-Business Security)

Jeff Johns <jeffj@SCOTT.NET> wrote:

>>PE also offers a form of encryption, but I prefer PGP. Although it is
>>crackable, I figure the 1024 bit key I use will stop at least the average
>>hacker.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 14:58:31 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      Re: Trembling lid...
Comments: To: Cristian Rigamonti <bigamons@FREEMAIL.IT>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Saw the same thing, didn't think any of it...

Philippe

----- Original Message -----
From: Cristian Rigamonti <bigamons@FREEMAIL.IT>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Wednesday, November 17, 1999 1:19 PM
Subject: Trembling lid...


> I've noticed that the lid of my palmtop (when in the OPEN position) has
> started to tremble, very lightly, near the left side of the hinge.
>
> I removed both hinge-caps (never did before!) and found that there was a
> slight play in the left hinge, that caused the movement (the right hinge
> was firm indeed). So I placed a little strip of paper around the hinge, to
> fill the (almost invisible) "gap", put the cap back and the trembling has
> substantially reduced (almost disappeared!).
>
> After all, the thing was not so scary, but I wonder if anyone else has
> experienced this (and how (s)he has dealt with).
>
> Cri
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 18:59:26 -0700
Reply-To:     Mike Kopplin <kopplin@technoir.nu>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Kopplin <kopplin@TECHNOIR.NU>
Subject:      Beta testers wanted for "graphical" FTP client
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

I've been working on a gui ftp client that works with Rod Whitby's LXTCP
package. It has a split screen for remote and local directories, modeled
loosely after Filer. At this point it has basic functionality: PUTs,
GETs, deletes files (local and remote), creates and deletes
directories(local and remote). There are some limitations yet, and
probably some bugs. <g>

The program should be ready for initial beta testing soon. If you are
experienced with LXTCP, and interested in trying this out let me know.

Mike Kopplin
kopplin@technoir.nu

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 19:58:27 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Alan Peres <aperes@MCS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Alan Peres <aperes@MCS.NET>
Subject:      Re: DOS emulator for WINCE
Comments: To: David Sargeant <david@HPLX.NET>
In-Reply-To:  <Pine.LNX.4.10.9911161947130.1141-100000@hplx.net>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed

>
>Just to clarify, this isn't a DOS emulator that you can run DOS programs
>with; it's a command prompt for WinCE, basically.  Not the same as XT-CE.

David

Thanks for the clarification. I posted the information as I remembered
previous discussion about XT-CE, and thought some list members might find
it of interest.

Alan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 20:48:17 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      IRC/LX
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Has anyone besides me used IRC/LX? Has anyone been able to get it to =
connect
to dal.net?

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 20:09:34 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, bobv <bobv@SOS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         bobv <bobv@SOS.NET>
Subject:      OT Re: Encryption
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> Memo offers built-in encryption? How does it work??

Lately we've been discussing hp ecryption. Some time ago I saved a file
with DES encryption (8 character passcode) and have since forgotten it.
Has anyone seen anything that will crack the encryption and give upi the
passcode?

TIA
BOB

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 22:37:36 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              blue73 <blue73@TAMPABAY.RR.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         blue73 <blue73@TAMPABAY.RR.COM>
Subject:      FS: Hp 200 lx 2meg, Connectivity kit 14.4 modem
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Hi,
        I have a 2meg HP200lx with the connectivity kit and a 14.4 xjack modem.  I
have all the boxes, books, cable, assortment of connectors etc...

Price $275 shipped 3 day FEDEX


Thanks
Larry Botkins

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 01:03:34 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: HPLX-L Digest - 16 Nov 1999 to 17 Nov 1999 - Special issue

Digest subscribers,

Would someone please cut and paste the above labeled digest into a
private email to me?  It's the one that started with, "There are 44
Messages totalling 1512 lines in this issue."

I had already downloaded my email for the night and my system locked up,
corrupting the end of my email file. The only email I actually lost was
the above designated digest, which was also automatically deleted from
the Juno email server after it was downloaded.

Thanks in advance,

John Vander Stel
Grand Rapids, Michigan
j_vanderstel@juno.com

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 23:42:41 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: Windows 95/98 won't release the serial ports

Hi All,

I responded to this post privately since I got this in a private email
earlier. Now that I've got it on the list too, I'll respond here too.

>> ComBoostTime=5
>> Com1AutoAssign=2
>> Com2AutoAssign=2
>> Com3AutoAssign=2
>> Com4AutoAssign=2
>> Com1FIFO=1
>> Com2FIFO=1
>> Com3FIFO=1
>> Com4FIFO=1
>>
>
>Mind if I ask what each command does?  I have to com2autoassign=2 and it
>did work to allow me to move from one com application to another without
>having to first terminate the dos-window or the win app that had been
>using the comport.  Someone told me about this ages ago.  But never
>explained it.  Altho, occasionally www/post (on the desktop) AFTER
>COMMUNICATIONS is done but post is still open, will toss up that
>Window-Message box:

Sorry.  I don't know the technical details.  All I know is that it works
very well. :-)

Hope this raw info is useful to someone.

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 22:20:05 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ashwin Balan <husk469@NETZERO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ashwin Balan <husk469@NETZERO.COM>
Subject:      Re: Nokia 9110 Communicator
Comments: To: Franklin Eekhout <franklin@ONLINE.NO>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

You can run Dos Applications on the Communicator since Geos runs on top of
Dos, as this is the case with the HP Onmigo100/120

----------
> From: Franklin Eekhout <franklin@ONLINE.NO>
> To: HPLX-L@UCONNVM.UConn.Edu
> Subject: Re: Nokia 9110 Communicator
> Date: Wednesday, November 17, 1999 7:27 AM
>
> > not tested its software though. I used a 9000 for some time. It was
> > okey, but it did not have the flexebility like the hplx. The 9110 is
> > the same I think. You can't run anything else than special software on
> > it. No dos application.
>
>
> I have a friend who has (had, got stolen I heard today) a 9110. It runs
> GEOS, so there is a fair amount of software to try, and there is some
amount
> of SW portability between GEOS implementations. Database, text, paint,
cad,
> etc. One can run GEOS in a window on a W95/98 pc too. It syncs with
Outlook.
> I think GEOS is a smart, lightweight system. The limiting factor is the
> phone. No CF slot or standard serial port! Stupid. Otherwise it is a
> 386(486?) based hardware design which is good. GEOS should really be able
to
> compete in the GUI world, it has a lot of modern day OS design from what
I
> read about it. I'm a non-programmer, so take the last with a pinch of
salt
> and check yourself. If this Morphy One ever got realised then GEOS would
be
> great on it. Linux is ok, but for the masses...
>
> The internal apps work ok for my friend who is a tech support guy with a
lot
> of stuff going on outside work. He had a PalmPilot, but ditched that for
the
> Nokia. It meant one thing less to carry. Basically PIM stuff. We tried
VNC
> on it, at long last he managed to get it going and was controlling his
work
> wintel pc with the 9110! Gives one a rush to see the Start button on a
> 9110... :-)
>
> But no CF-slot! What a lame descision. That removed it completely from
the
> database oriented market. Now it's just a simple PIM telephone. And the
> cable has level converters for RS-232. Pity. I don't like the design of
the
> top part of the phone though, I would prefer it to be straight. It looks
> silly now. Marketing folks had a go at it, I suppose.
>
> But the LX is a small computer, so it really has no competition from the
> 9110. Now if it had a CF-slot and standard serial port, DS-upradebility,
> internal RAM upgrades etc, then that would be a different matter!
>
> www.newdealinc.com for GEOS.
>
> br
>
> Franklin
> (Who ran GEOS on a C64 in the old days...)
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 22:30:59 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ashwin Balan <husk469@NETZERO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ashwin Balan <husk469@NETZERO.COM>
Subject:      Found Cheap 200lx's and accessories
Comments: To: Victor Roberts <robertsv@IX.NETCOM.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Last week I went to Fry's electronics and bought a brand new 4mb Hp200lx
for 253.99 with sales tax, it was a really good deal.  Whats even better is
that I saw that they had brand new  ACE 14.4/4mb combo's for 99 dollars.
The Ace 14.4/8mb were 139.00.  Are these good prices??  I could bargain
with the manager to get the 8mb cards down to 110 dollars.  The Store that
I went to had about 10, 4 meg units and 3 8 meg units.

----------
> From: Victor Roberts <robertsv@IX.NETCOM.COM>
> To: HPLX-L@UCONNVM.UConn.Edu
> Subject: Re: Speed upgrade
> Date: Wednesday, November 17, 1999 3:03 PM
>
> Is this question directed to me? If so, how do I do what? Not
> load the drivers, or keep the screen from being blurry?
>
> To not load the drivers you can REM the driver out of your
> config.sys file or press ALT during a boot and choose boot
> without the startup files.
>
> To get a non-blurry screen without the driver, you just have to
> be lucky, I guess. <g>  This seems to be a characteristic of my
> 200LX. BTW - I do use the driver for normal operation. It is
> just that I noticed that my screen was just fine when I booted
> without the startup files as a test.
>
> Vic
>
> On 2 Nov 1999, al chin <hobchi@JUNO.COM> wrote:
>
> > How do you do that???
> >
> > Semper mobilis,
> > yor pal al :-) .............
> >
> > ><fjkaufman@WORLDNET.ATT.NET> wrote:
> > >
> > >> Battery life - pure and simple.  And keeping it pure and simple:  No
> > >> drivers - no blurry screen.
> > >
> > >The screen on my new 200LX DS is not blurry even if I do not
> > >load the 2X driver.
> > >
> > >Vic
> > >
> >
> > ___________________________________________________________________
> > Get the Internet just the way you want it.
> > Free software, free e-mail, and free Internet access for a month!
> > Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
> >
> > ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
> >
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 17 Nov 1999 23:12:03 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Nokia 9110 Communicator
In-Reply-To:  <HPLX-L%99111801332050@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Wed, 17 Nov 1999, Ashwin Balan wrote:

> You can run Dos Applications on the Communicator since Geos runs on
> top of Dos, as this is the case with the HP Onmigo100/120

But if I recall, DOS apps wouldn't run on the OG100/120 for some reason.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 01:51:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Blah...Just Blah.." <matrix@SHOT.ORG>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Blah...Just Blah.." <matrix@SHOT.ORG>
Subject:      Re: Nokia 9110 Communicator
Comments: To: David Sargeant <david@HPLX.NET>
In-Reply-To:  <Pine.LNX.4.10.9911172311410.21029-100000@hplx.net>; from David
              Sargeant on Wed, Nov 17, 1999 at 11:12:03PM -0800
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Wed, Nov 17, 1999 at 11:12:03PM -0800, David Sargeant wrote:
> On Wed, 17 Nov 1999, Ashwin Balan wrote:
>
> > You can run Dos Applications on the Communicator since Geos runs on
> > top of Dos, as this is the case with the HP Onmigo100/120
>
> But if I recall, DOS apps wouldn't run on the OG100/120 for some reason.

from what i remember, the og100/120 had enough bios and dos functionality
to get geos going and thats about it.  i remember there was a device driver
you could load that would get bios friendly programs to run, but things
that tried  direct hardware access  always bombed.

This is all from a very sketchy memory

--francois

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 09:46:22 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Franklin Eekhout <franklin@ONLINE.NO>
Subject:      Re: Nokia 9110 Communicator

>We haven't seen Motorola's Philip's or Ericsson's answers yet.  They will
certainly launch similar >models.

Will they? They have prioritized size, weight and battery life. I doubt it.
They will launch a WAP-thing maybe, but not a computer-phone with a
keyboard. Look at Ericsson, they have a clip-on keyboard for SMS. Not a
computer, it's not even a terminal. The hype of a computer phone is dying, a
function key controlled WAP phone is the way forward. So marketing
believes...

>Furthermore,this is the first phone of that kind.Wait a couple of years and
I think we will see both >CF-slots and serial ports and much more,perhaps
even a little webcamera.

Second. Nokia 9000. Third if one counts the communication that must have
gone on between HP+Nokia for the HP 700LX. CF and serial ports will be dead
in a few years. Bluetooth and another unstandard standard smaller form
factor memory slot will take over.

>Finally,why did you remove the fluff from the subjectfield?

It's not fluff. We are discussing a portable computer. Previous discussions
on the Palm, Psion and CE units have not had fluff prepended. :-)

>We must try to stick to the rules,don't give the anti-fluffers added force
to their arguments,writing

Gi blaffen i reglene Lars, bruk fornuften! :-)

br

Franklin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 10:00:29 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Franklin Eekhout <franklin@ONLINE.NO>
Subject:      Re: Nokia 9110 Communicator

Hi David,

> But if I recall, DOS apps wouldn't run on the OG100/120 for some reason.

No, they do, but suffer sort of like the 95LX, the screen is not a standard
80x25. So one had to scroll to see the whole screen. There is a little
something that forces the Omnigo to boot just to DOS. But  then one lost the
pen and power control. Don't know if that was ever solved. IZL, a GEOS
developement system was also released as freeware (?) so that is a better
option for programming on the Omnigo.

br

Franklin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 09:51:51 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Appointment Book / Todo structures
Comments: To: David Ball <dmb10@SWBELL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I became father last weekend and will reply a little later.
See you.

-goe-

P.S. his name is Melvin Anthony


-----Original Message-----
From: David Ball <dmb10@SWBELL.NET>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Dienstag, 16. November 1999 21:39
Subject: Re: Appointment Book / Todo structures


>   >My ToDo looks like this (the number is the priority I set):
>   >0 ---------- urgent and important ----------
>   >1 pay the milkman
>   >1 write invoice for Alex
>   >1 write invoice for Marc
>   >1 write offer for Andy
>   >2 ---------- urgent ----------
>   >3 buy bread
>   >3
>   >4 ---------- important ----------
>   >5 bring car to service
>   >5 check website xyz.com
>   >6 ---------- not important ----------
>   >7 check catalog abc
>   >7 check website efg.com
>   >The 0, 2, 4 and 6 are the headers. These numbers are not used as
>   >priorities, so the headers remain always on the right place. Each
>   >day I decide, if a tasks
>   >priority changes on this day. Depending on the appointments, I have
>   >to change
>   >this. There was an article on www.palmtoppaper.com about this
>   >method.
>   >Only urgent means, that it is _not_ important. Only important means,
>   >that it is
>   >_not_ urgent.
>
>This is fascinating.  I have some questions about your headers/ratings.
>Are the Urgent/Important ratings for those tasks that "have to get
>accomplished today?  In other words, what standards do you use in
>breaking down a task and deciding whether a task is "urgent", but not
>"urgent and important"?
>
>Any enlightenment you can provide would be greatly appreciated.
>
>Regards,
>
>David Ball
>mailto:dmb10@swbell.net
>
>
>
>
>
>Palmtop Power!--This email composed on a rugged HP200LX that fits in
>your pocket!
>
>Net-Tamer V 1.11P - Test Drive
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 09:53:26 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Appointment Book / Todo structures
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>>My ToDo looks like this (the number is the priority I set):
>>0 ---------- urgent and important ----------
>>1 pay the milkman
>
>the problem i assume with this method is having to pg-down all the time to
>reach the todo to delete


Yes, but the urgent and important tasks are always on top. If I check the
list,
to decide, if a priority changed, I have enough time to scroll down. I
always
use PgDn for this.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 09:57:13 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: WWW/LX Plus a flop??
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>I counted the number of signs in your signature
.
>If I download 60 emails aday with each of them
>having 10 times more than Jeff's 151 it would
>take me 60*0.8=48 seconds  with singlespeed,
>that is not a single minute.

And not to forget, that the phone time in Europe
is not as cheap as in the US.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 10:01:52 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Using 200LX as WWW browser
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>The Web is moving to more and more what Peniel (I
>believe) termed aptly "HV-Hostile" documents. This means that
>more and more of the Web is NOT compliant with HTML 3.2, i.e.
>HV may not be able to "paint" it. Also, more andm ore
>Javascript is used - HV cannot do anything with this. More and
>more Java is on the screens, HV can't do anything with this.


Java and JavaScript is Bleeding Edge Technology. This is one
of the Top-Ten-Mistakes of Webdesign (http://www.useit.com).
In future a Website must be WAP (mobile phone)-compatible.
So there is perhaps a little hope, because it seems (I don't know
exactly) as WAP produces just a very slim and minimalistic
near-HTML code. I hope HV or a later release of HV will support
that.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 10:05:10 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Introduction
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>system admin for HP-UX and Oracle
>and exactly one week ago I bought a hp200lx.
>Additionally I'm looking for a good solution for getting my data in the NT


There are some Linux tools on www.palmtop.net and Perl libraries for
the 200LX databases exist too. You don't need NT when you work with
Unix systems, to connect to the palmtop. You have the best Palmtop now.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 17:29:36 +0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "R.S." <rogerswn@CTIMAIL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "R.S." <rogerswn@CTIMAIL.COM>
Subject:      Re: RPN calculator TSR
Mime-Version: 1.0
Content-Type: multipart/alternative; boundary="81382231"

This is a multipart message in MIME format

--81382231
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
X-MIME-Autoconverted: from 8bit to quoted-printable by smtp01.hk.linkage.net id RAA28145

There is a program call keypad10.zip in Simtel site. it should work on th=
e=20
=A0=20
200LX if you can find a "num lock" key to activate it. But it is only a =A0=
=20
simple calculator, not scientific.=20

Roger S.=20
-- R.S., rogerswn@ctimail.com on 11/18/1999 at 5:29:33 PM

--81382231
Content-Type: text/html
Content-Transfer-Encoding: Quoted-Printable

<html><head></head>
<body>
<table><tr><td>
<font size=3D"0" color=3D"#000000" face=3D""></font><font size=3D"3"=
 color=3D"#000000" face=3D"mingliu">There is a program call=
 keypad10.zip in Simtel site. it should work on the &#160;=
 &nbsp;
<br>
200LX if you can find a "num lock" key to activate it. But it is=
 only a &#160; &nbsp;
<br>
simple calculator, not scientific. &nbsp;
<br>

<br>
Roger S. &nbsp;
<br>
</font><font size=3D"3" color=3D"#000000" face=3D"MingLiU">

</font></td></tr></table><table><tr><td>
-- R.S., rogerswn@ctimail.com on 11/18/1999 at 5:29:33 PM<br>
</td></tr></table>
</body></html>

--81382231--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 01:52:23 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: WWW/LX PLUS demo
Comments: To: nospam@UNDECIMUS.FREESERVE.CO.UK
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

>  Tony wrote:
>
> " if I recall correctly you said you had already gone to
> altavista
> and searched and all that would have probably used up the
> 16K."
>
> Even if my knowledge of computers is far from expertlevel,I do have
>  a brain:-)
>
> I did the Altavista searching first with my registered WWW/LX 1.1 and
>  then typed manually the webadressses in the Plusversion.

I am convinced Tony was trying to be helpful to you.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 01:52:16 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: PE/PIM
Comments: To: bobv <bobv@SOS.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Bob,

> >> Thanks Avi
> >>
> >> I have ver 2.2c 3 Sept 99.
> >>
> >> I checked your site and the most recent ver is 2.1.
> >>
> >> What version are you running?
> >
> >2.2 19Jun99
>
> I have re-tested, and it doesn't seem to be an issue of the version.
>
> Opening an new file in PE and naming it "123456789.TXT" then writing
> data,
> saving and exiting PE, will yield the following results:
>
> A file named 12345678.III and a file named 12345678.BAK will be created.
>
> Both will have NO saved data, but be empty instead.
>
> I realize that it is my responsibility to count the number of letters in
> files
> I wish to create, but we don't always do what we should, do we?

Well, I do not know how to help you. When I save a file with a
name that is too long, PE chops off the name to 8 chars, and
uses whatever I gave as an extension. you seem to have another
program, and I cannot reproduce the error you get.

If Andreas listens, maybe he has an idea. (I found out from
him that he _does_ listen, but does not post publicly. I made
a mistake in assuming he was not hanging out here, apparently
it was only during a specific time period, apparently my
misunderstanding of what he said.)

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 05:32:00 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Nokia 9110 Communicator
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Franklin wrote:


"Will they? They have prioritized size, weight and battery life. I doubt=
 it.
They will launch a WAP-thing maybe, but not a computer-phone with a
keyboard."

If people want a computer-phone there will sooner or later be a manufacture=
r who find out this and starts to produce such devices,atleast according=
 to the theory of marketeconomy.



"It's not fluff. We are discussing a portable computer. Previous discussion=
s
on the Palm, Psion and CE units have not had fluff prepended."

I guess you are right.


"Gi blaffen i reglene Lars, bruk fornuften! :-)"


Hey,I liked that comment!One pluspoint to Franklin:-)

I understand why you didn't translate it though:-)



Lars Hedstrom/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 21:42:37 -0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Eggins <david.eggins@USA.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Eggins <david.eggins@USA.NET>
Subject:      Compact Flash Cards
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

  Hello there

I thaught you all might be interested in this site.  Sells NiMH AA
batteries, and CF Cards.


 http://store.yahoo.com/alix/compact-flash-cards.html

David Eggins

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 12:13:15 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Franklin Eekhout <franklin@ONLINE.NO>
Subject:      Fluff: was 9110, now fluff!

>If people want a computer-phone there will sooner or later be a
manufacturer who find out this and >starts to produce such devices,atleast
according to the theory of marketeconomy.

So why is the 200Lx dead...?

>>"Gi blaffen i reglene Lars, bruk fornuften! :-)"
>Hey,I liked that comment!One pluspoint to Franklin:-)
>I understand why you didn't translate it though:-)

In case anybody misunderstands:

"Don't bother about the rules Lars, use common sense!"

It was meant to be a little something for the Scandinavian readers on the
list. The Swedish industrial minister said straight out that " ...Norway was
the last Soviet state...". Lars implies that what I wrote is a little out of
line, so I have to make it clear. :-) I was going to use a more vernecular
saying which contains a 4 letter word, one that is used in daily
conversation amongst the under 40s, but thought better of it. I just got
flamed for using a mild 4 letter word in a sentence (balls) on a Norwegian
computer mailing list...

This is Fluff!

br

Franklin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 12:38:55 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              b.newins@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Newins <b.newins@WORLDNET.ATT.NET>
Subject:      Re: Hi (again) and Modem (again) :-)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

My experience has shown that the Zoom Pocket 14.4 that
Thaddeus now has a few of is one of the best external modems
for the palmtop.  With the custom short cable it is very
handy.  It uses a 9v battery.  The serial port can't
do much more than 14.4 with the 8250 UART & communication
overhead even with a double speed unit, so buying a faster
unit is unnessary.

The PCMCIA port on the DS unit is a different story.  It
seems to be able to handle 22,000 to 25,000 baud so a 33.6
card modem would be optimal.  The Apex Data  33.6 #011-20641
works great for me as it draws only about 137ma.  Last I
checked Mobil Planet stocked these units.   =Bob=


> Since the product is still "coming soon", I guess they've had problems.  Would
> be interesting to see for its size, even if the 200LX won't do much better than
> 14400 given its 8250 UART on the serial port (although the error correction may
> still be a benefit).

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 12:51:31 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: 200LX for a journal
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi,

ah, thanks Curtis, Steve and Chris,
> > Memo offers built-in encryption? How does it work??
>
> Go to FILE-PASSWORD and define it.  I'm embarrassed to say that I just

I tried it - and it works quite nicely.
Maybe I'll use it for encryption of my passwords and PIN numbers...

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 08:21:57 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      WWW/LX email doesn't recognize "FROM:" & "SUBJECT:"
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

I've started getting spam with the From and Subject header keywords in
all UPPER case.  WWWW/LX doesn't seem to recognize them and just shows
an empty field with a "-" dash.  Of course this make me curious so I
open it up only to find the spam.  Grrr...

Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 08:22:02 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Introduction
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Hi!
>
> I'm new to the list and want to introduce myself:
> I live near munich in germany, in the age of 32, system admin for HP-UX and
...

Welcome Martin!  Excellent choice on the 200LX.  Don't forget it does
some pretty good games too.  Lots of stuff at...

  http://www.palmtop.net
  http://www.palmtop.net/super.html

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 09:17:54 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              riley <riley@IGLOU.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         riley <riley@IGLOU.COM>
Subject:      *FS* d-lint pocket eithernet adaptor
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

model de-600tpe
$10 PLUS SHIPPING.
thanks
mike

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 09:41:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Soper <ssoper@PROBOLINGGO.WASANTARA.NET.ID>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Soper <ssoper@PROBOLINGGO.WASANTARA.NET.ID>
Subject:      Replying to the Digest
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I receive the List by the Digest form.  It is much better for me to
receive it that way, instead of by a bunch of separate messages. The
only problem is that I don't know how to respond to individual
messages.  I use my Palmtop, with Post/LX exclusively for all my
e-mails.   Is there a way to respond to individual messages in the
Digest, using Post/LX.

Thanks,
Steve Soper

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 09:41:11 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Soper <ssoper@PROBOLINGGO.WASANTARA.NET.ID>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Soper <ssoper@PROBOLINGGO.WASANTARA.NET.ID>
Subject:      Post/LX & Hotmail
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Can Post/LX (really WWW/LX) be set up to use "Hotmail"?

I really like Post/LX, but it would be nice to be able to use it with
Hotmail since I travel so much.  Almost all of my travels are in Asia.

Thanks,
Steve Soper

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 08:46:41 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Re: Using 200LX as WWW browser
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> >The Web is moving to more and more what Peniel (I
> >believe) termed aptly "HV-Hostile" documents. This means that
> >more and more of the Web is NOT compliant with HTML 3.2, i.e.
> >HV may not be able to "paint" it. Also, more andm ore
> >Javascript is used - HV cannot do anything with this. More and
> >more Java is on the screens, HV can't do anything with this.

Like ebay for example.  I can't bid anymore.  I can list all the
auctions, but when I type in my bid amount and press review bid,
I get an error message that tells me the previous page was not
filled out correctly.  It is getting more and more frustrating
lately.

I have depended on my LX to browse for quite some time now, and
I am running into more and more sites I can't get to.  I have
even considered carry with me one of those forbidden devices,
(CE) just to browse the web, while away from home.  Don't know
what else to do.  More and more lately I either get hung up at a
website, or it won't even let me view it.  :-(

Robert Hocking

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 08:54:51 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Post/LX & Hotmail
Comments: To: Steve Soper <ssoper@PROBOLINGGO.WASANTARA.NET.ID>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 18 Nov 1999 09:41:11 -0500, Steve Soper <ssoper@PROBOLINGGO.WASANT=
ARA.NET.ID> wrote:

> I really like Post/LX, but it would be nice to be able to use it with
> Hotmail since I travel so much.  Almost all of my travels are in Asia.

Unfortunately Hotmail is a web based service and not POP email, so =
neither
Post/LX or Goin' Postal is going to work.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 08:54:49 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Replying to the Digest
Comments: To: Steve Soper <ssoper@PROBOLINGGO.WASANTARA.NET.ID>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 18 Nov 1999 09:41:06 -0500, Steve Soper <ssoper@PROBOLINGGO.WASANT=
ARA.NET.ID> wrote:

> I receive the List by the Digest form.  It is much better for me to
> receive it that way, instead of by a bunch of separate messages. The
> only problem is that I don't know how to respond to individual
> messages.  I use my Palmtop, with Post/LX exclusively for all my
> e-mails.   Is there a way to respond to individual messages in the
> Digest, using Post/LX.

There was a shareware program for POST/LX that would allow you to do =
this.
Goin' Postal, the registered version, explodes digests with no additional
cost other than the initial registration fee.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 10:05:54 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: HPLX-L Digest - 16 Nov 1999 to 17 Nov 1999 - Special issue
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thu, 18 Nov 1999 09:43:28 -0500 (EST)

There is an archive of the month's HPLX-L DIGESTs on the HPLX-L COMMAND
CENTER page (see below for URL).

08h39m54s ago ...
On Thu, 18 Nov 1999, John J Vanderstel wrote:

> Digest subscribers,
>
> Would someone please cut and paste the above labeled digest into a
> private email to me?  It's the one that started with, "There are 44
> Messages totalling 1512 lines in this issue."
>
> ...


*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 10:18:21 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: *FS* d-lint pocket eithernet adaptor
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thu, 18 Nov 1999 10:09:31 -0500 (EST)

The obvious question:

Does it work in the LX? Do you have the drivers?

I have a de-650 but nerver got it working in the LX...couldn't find the
right drivers...any hints?

aTdHvAaNnKcSe...AJKind


51m37s ago ...
On Thu, 18 Nov 1999, riley wrote:

> model de-600tpe
> $10 PLUS SHIPPING.
> thanks
> mike
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 10:18:31 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      CloseAll
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thu, 18 Nov 1999 10:13:56 -0500 (EST)

Hi

Does anyone know where I can get a copy of Hiro Sekiya's CloseAll
program? Couldn't find it on SUPER or VECTOR(did I miss it?).

Cheers & TIA

*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 07:21:09 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: CloseAll
Comments: To: MCHEM1@UCONNVM.UConn.Edu
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>Does anyone know where I can get a copy of Hiro Sekiya's CloseAll
>program? Couldn't find it on SUPER or VECTOR(did I miss it?).

What does this program give you as compared to a macro
({More}{Menu}{Enter}L{More}) ?

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 09:37:04 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      Re: Filer backup
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> From:    Longden Loo <Longden_Loo@CANDLE.COM>
> Unchecking the "Modified files only" just ensures that ALL files are
copied, and
> it wasn't clear from your original post what your exact intent was for
backup.
> Copying all files is a FULL backup, whereas copying just modified files is
an
> INCREMENTAL backup.

yes, it worked this time: "modified files only" takes less time than copying
the whole 1.5mb of directory structure

i only needed to update the files in directories  on A:\9 i had been working
on during the last few days on C:\9 , which is 8 out of a total of 109 (in 5
directories)

> - Longden (a fellow clumsy lump of biotechnology)

you seem to be keeping pace with the computers just fine (not sure for how
long though) ;))

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 17:01:57 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin_Doering@MN.MAN.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Doering <Martin_Doering@MN.MAN.DE>
Subject:      PCMCIA Modem
Content-transfer-encoding: quoted-printable
Content-type: text/plain; charset=ISO-8859-1
Mime-version: 1.0

Hi!

I'm owner of a PCMCIA modem=2E In my laptop this gets preety warm=2E So I think i=
t
needs more than the 150 mA of power=2E

What will happen, if it is for example 800 mA? Will my 200 LX break or will it
just not functioning?

Martin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 17:07:36 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin_Doering@MN.MAN.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Doering <Martin_Doering@MN.MAN.DE>
Subject:      Other DOS Version on HP 200 LX
Content-transfer-encoding: quoted-printable
Content-type: text/plain; charset=ISO-8859-1
Mime-version: 1.0

Hi!

Has anybody ever tried to run another Version of Dos or f=2Eex=2E FreeDos on the=20=
HP?
Does this need more memory (The system will have to be copied into the main
memory?!?)? Could there be some advantage?

Martin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 10:01:10 -0600
Reply-To:     jhope@enoinc.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "ENOINC - John S. Hope" <jhope@ENOINC.COM>
Subject:      Re: PCMCIA Modem
Comments: To: Martin_Doering@MN.MAN.DE
In-Reply-To:  <TFSBFJCG@mn.man.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

It just won't function because there is not enough power.  Do not waste you
time trying PCMCIA cards if the power requirements are more than 150mA.

-----Original Message-----
From: HPLX Mailing List mailto:HPLX-L@UCONNVM.UConn.EduOn Behalf Of
Martin Doering
Sent: Thursday, November 18, 1999 10:02 AM
To: HPLX-L@UCONNVM.UConn.Edu
Subject: PCMCIA Modem


Hi!

I'm owner of a PCMCIA modem. In my laptop this gets preety warm. So I think
it
needs more than the 150 mA of power.

What will happen, if it is for example 800 mA? Will my 200 LX break or will
it
just not functioning?

Martin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 08:01:47 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: PCMCIA Modem
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>What will happen, if it is for example 800 mA? Will my
>200 LX break or will it just not functioning?

It may force your LX to reboot, or it may not even turn on as long as the card
is in the slot.

I don't recall any threads about high-power cards breaking the LX, tho some can
get hot enough to be a concern.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 08:07:21 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Other DOS Version on HP 200 LX
Comments: To: Martin_Doering@MN.MAN.DE
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>Has anybody ever tried to run another Version of Dos
>or f.ex. FreeDos on the HP?

The problem on the LX is that the DOS 5.0 kernel is loaded from ROM, and from
there it loads the autoexec.bat and config.sys.  Similar to if the boot record
of a boot disk were implanted in ROM.  Hence there are limitations to what it
can load, and I don't believe anyone has been successful in loading and running
a DOS 6.x on the LX, let alone a non-MS version.

Loaders do apparently exist that would allow Minix (a small Unix implementation)
with limitations, but I don't know how applicable that loader would be in
regards to another DOS version (a Mack or David question perhaps).

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 17:20:38 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Strange error message when sending email withh post/lx
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 17 Nov 1999 08:36:21 -0800, Lars Hedstroem <nxw988e@TNINET.SE> wrote:

>  Martin wrote:
>
> "Andreas replied offlist. He has never seen this errormessage.
> It has not happened again so we concluded that it was a "cosmic
> magnetic once in a lifetime error" :-)) Serious no we could not find anything wrong anywhere. I still can't send the message in question."
>

> If I send 100 emails one behave just like you said,the sending just
> stops and nothing more happends until it times out;I do not get any
> errormessages..

It seems that this is the same error I get, but I get a error message.
(Which btw  makes no sense).

> If I try to send it again the same thing happends.I also have tried to
> cut and paste to a memofile and then tried to send that one but that
> didn't go either.

I had the same problem. I solved the problem by exporting the mail and
attaching the file to a new mail.

> But one time I tried to cut and paste the email in two halves and
> then one was possible to send away but not the other one.(This was a
> quite big email,and to rewrite it wasn't so funny) I did the same
> again,cut the remaining half in two halves with the sa> me result,one
> was possible to send the other not.

If you continue to do this you should be able to isolate the "problem"
lines. I did not try this "trick". When I could not send the mail when
I pasted it in a new mail I gave up and attached it instead..

I asked Andreas if this could be a bug in post/lx and he said that it was
possible. But he had never seen this error.

> It is just as some form of combination of keystrokes in the email
> could make this happen,and just that keystrokecombination stops the
> sending.I have no better solution.

This is what I thought of the problem too. The email was very normal.
Nothing special at all so I do not know what it could have been. It
have not happend since the first two times. But I will keep you posted.

The two mails I had problems was very long ones. But I have not had any
problems with long emails since..strange

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 17:20:42 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Undetermined address/swede mixup was:Re: Post/lx
              anddownloading headers
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 17 Nov 1999 08:36:22 -0800, Undetermined origin c/o LISTSERV
administrator <owner-LISTSERV@UCONNVM.UCONN.EDU> wrote:

Lars wrote:

> Yes I know,I hardly remember itself:-) (nxw988e@tninet.se)
>
> "Is it possible to have a alias?"
>
> You mean at my ISP???

Yes, my orginal emailaddress is 90199462@mobilpost which is my cellular
number but I have a alias =martin@mobilpost.com. This makes it easier
to remember.

> "Therefor my
> guess is that it is a problem at you isp..only a guess.."
>
> Could be,but the question is whose ISP,Thomas' or mine?We haven't the same.

So this problem is for real? I thought that I confused you and that was
the problem, but this is a more complex problem then I thought.. :-))
I have no idea what the problem can be..


> "I do not use www/lx with hv sorry. I only use post/lx for
> email/news."
>
> So you never surf the net with your LX?

No never. Well I have tried it a couple of times. I will try it out
some more when I get my hp upgraded and hooks it to my network at home.
But I really have no need to surf with the Hp..

The webpages I usually surf with my desktop are not "Hv friendly" :-)

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 10:47:36 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Theodore Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Theodore Heise <theise@NETINS.NET>
Subject:      Re: CloseAll
In-Reply-To:  <8825682D.00555C7D.00@n-smtpmta.candle.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 18 Nov 1999, Longden Loo wrote:

> What does this program give you as compared to a macro
> ({More}{Menu}{Enter}L{More}) ?


Aha!  Some time back Ed Keefe described a method for hacking
the built-in apps out of the AppMan.  I gleefully did so.

Upon trying Longden's suggested method for closing all, I
discovered it doesn't--at least for those apps I have removed
from AppMan. No big deal, but something folks may want to be
aware of.

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 11:55:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Fwd: Re: CloseAll
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

--- begin of forwarded message ---

Date: Thu, 18 Nov 1999 11:51:54 -0500
From: mchem1@uconnvm.uconn.edu
To: Longden_Loo@candle.com
Subject: Re: CloseAll

Thu, 18 Nov 1999 11:49:01 -0500 (EST)

Closes applications added by MoreExm...Actually TaskList has a function
to do this as well, and I found that (VECTOR).

01h27m52s ago ...
> >Does anyone know where I can get a copy of Hiro Sekiya's CloseAll
> >program? Couldn't find it on SUPER or VECTOR(did I miss it?).
>
> What does this program give you as compared to a macro
> ({More}{Menu}{Enter}L{More}) ?
>
> - Longden
>
*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

--- end of forwarded message ---
*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 12:43:08 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: Who do you have a Hornet chip information?
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

> Depends who you talk to.  I've heard both stories.  It's an Intel chip,
> though ... I wonder if Intel has datasheets available or if they made it
> just for HP.
>
I'm guessing that Hornet might just be HP's name for it. If it is one of the
off-the-shelf Intel 80C186 chips, Dr. Dobbs' Journal probably has a manual for
it in .PDF at:

http://www.x86.org/intel.doc/186manuals.htm

Hope this helps,
Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 10:31:16 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Post/LX & Hotmail
In-Reply-To:  <199911181454.IAA27253x@scott.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 18 Nov 1999, Jeff Johns wrote:

> Unfortunately Hotmail is a web based service and not POP email, so
> neither Post/LX or Goin' Postal is going to work.

I think Hotmail has an option to give you POP access to your mailbox...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 12:29:42 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: Post/LX & Hotmail
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----_=_NextPart_001_01BF31F2.E49271B4"

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01BF31F2.E49271B4
Content-Type: text/plain;
        charset="iso-8859-1"

At home I set up a Hotmail account for my wife. During the set-up it
asked me if I wanted to be able to use Outlook Express for the Hotmail.
I said 'yes', and now my wife does her mail through Outlook Express,
(which is, I believe, a "POP" email client). So apparently Hotmail does
work with POP somehow.

Steve

        > Unfortunately Hotmail is a web based service and not POP
email, so
        > neither Post/LX or Goin' Postal is going to work.

        I think Hotmail has an option to give you POP access to your
mailbox...

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

------_=_NextPart_001_01BF31F2.E49271B4
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12">
<TITLE>RE: Post/LX &amp; Hotmail</TITLE>
</HEAD>
<BODY>

<P><FONT FACE=3D"Arial">At home I set up a Hotmail account for my wife. =
During the set-up it asked me if I wanted to be able to use Outlook =
Express for the Hotmail. I said 'yes', and now my wife does her mail =
through Outlook Express, (which is, I believe, a "POP" email client). =
So apparently Hotmail does work with POP somehow.</FONT></P>

<P><FONT FACE=3D"Arial">Steve</FONT>
<UL>
<P><U></U><A NAME=3D"_MailData"><U></U></A>
<BR><FONT SIZE=3D2 FACE=3D"Arial">&gt; Unfortunately Hotmail is a web =
based service and not POP email, so</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">&gt; neither Post/LX or Goin' Postal =
is going to work.</FONT>
</P>

<P><FONT SIZE=3D2 FACE=3D"Arial">I think Hotmail has an option to give =
you POP access to your mailbox...</FONT>
</P>

<P><FONT SIZE=3D2 FACE=3D"Arial">** HPLX-L LIST Info at <A =
HREF=3D"http://www.sp.uconn.edu/~mchem1/HPLX.shtml" =
TARGET=3D"_blank">http://www.sp.uconn.edu/~mchem1/HPLX.shtml</A></FONT>
</P>
</UL>
</BODY>
</HTML>
------_=_NextPart_001_01BF31F2.E49271B4--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 11:23:14 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: Using 200LX as WWW browser
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 18 Nov 1999 08:46:41 -0600, Robert Hocking <hocking@FLASH.NET> =
wrote:


> I have depended on my LX to browse for quite some time now, and
> I am running into more and more sites I can't get to.  I have
> even considered carry with me one of those forbidden devices,
> (CE) just to browse the web, while away from home.  Don't know
> what else to do.  More and more lately I either get hung up at a
> website, or it won't even let me view it.  :-(



Hi Robert & All,

Its ok, go on ahead a get a CE device. I just recently got a Jornada
420 for the same purpose. The 360LX is also a great tool to use for =
biding
on Ebay. Sold mine to get the Jornada 420, it also let me to start buying
another one of Hal's publications ( The Handheld PC Magazine ).

BTW: The Handheld PC Magazine is a great magazine. I suggest before
you jump into the game stop by your local book store and pick up
"The Windows CE Buyer's Guide 2000". No need to state who the Publisher
is.  (:-)




Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 11:23:12 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: CloseAll
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 18 Nov 1999 10:18:31 -0500, Al Kind <MCHEM1@UCONNVM.UCONN.EDU> =
wrote:

> Thu, 18 Nov 1999 10:13:56 -0500 (EST)
>
> Hi
>
> Does anyone know where I can get a copy of Hiro Sekiya's CloseAll
> program? Couldn't find it on SUPER or VECTOR(did I miss it?).


Hey Big AL,

I have a copy and if I'm not mistaken it comes with TaskList in a bonus =
zip.
Check it out and if not drop me a line and I'll send you a copy.



Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 13:24:05 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Post/LX & Hotmail
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 18 Nov 1999 10:31:16 -0800, David Sargeant <david@HPLX.NET> =
wrote:

> I think Hotmail has an option to give you POP access to your mailbox...

Hmmm... this may require an investigation...

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 11:41:04 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Post/LX & Hotmail
In-Reply-To:  <199911181924.NAA18786x@scott.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 18 Nov 1999, Jeff Johns wrote:

> Hmmm... this may require an investigation...

It might be a paying option, but for LX users who are on the road a lot,
it might be a nice way to get your mail via either web or on the palmtop.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 13:39:54 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Re: PCMCIA Modem
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> >What will happen, if it is for example 800 mA? Will my
> >200 LX break or will it just not functioning?
>
> It may force your LX to reboot, or it may not even turn on as long as =
the card
> is in the slot.
>
> I don't recall any threads about high-power cards breaking the LX, tho =
some can
> get hot enough to be a concern.
>
> - Longden

I had a Motorola Montana Cell modem that I feel damaged one of my
previous LX's.  I was browsing the web, and my screen started to
get lighter and lighter, and then dissappeared.  I thought the
heat sensor was just doing its thing, but when my display finally
went out, I could not get the LX to turn back on.  I replaced the
batteries, both main and backup, and even tried another power
supply, but nothing.  I called HP, they tried some key strokes,
but had me send it back to them for replacement, under my
extended contract.   Lucky that I bought the contract.  So I
ended up selling the modem, and now use one that I know draws
less than 150 ma.  So be carefull not to ruin your LX like I did.

Robert Hocking

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 13:39:52 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Re: CloseAll
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> >Does anyone know where I can get a copy of Hiro Sekiya's CloseAll
> >program? Couldn't find it on SUPER or VECTOR(did I miss it?).
>
> What does this program give you as compared to a macro
> ({More}{Menu}{Enter}L{More}) ?
>
> - Longden

Am I reading you reply wrong?  I use more menu AT enter enter as
a macro assigned to FN+F10 to terminate all.  I looked at your
macro and could not get it to agree with anything on my LX.
Could you elaborate please?

Robert Hocking

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 13:43:13 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Re: Using 200LX as WWW browser
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Hi Robert & All,
>
> Its ok, go on ahead a get a CE device. I just recently got a Jornada
> 420 for the same purpose. The 360LX is also a great tool to use for =
biding
> on Ebay. Sold mine to get the Jornada 420, it also let me to start =
buying
> another one of Hal's publications ( The Handheld PC Magazine ).
>
> BTW: The Handheld PC Magazine is a great magazine. I suggest before
> you jump into the game stop by your local book store and pick up
> "The Windows CE Buyer's Guide 2000". No need to state who the Publisher
> is.  (:-)
>
> Regards,
>
> Qman...

Been a subscriber of both magazines for years.  My wife has a
620.

Robert Hocking

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 11:59:07 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: CloseAll
In-Reply-To:  <199911181939.NAA10734@ogopogo.flash.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 18 Nov 1999, Robert Hocking wrote:

> Am I reading you reply wrong?  I use more menu AT enter enter as a
> macro assigned to FN+F10 to terminate all.  I looked at your macro and
> could not get it to agree with anything on my LX. Could you elaborate
> please?

The macro Longden gave starts the Application Manager and goes to the
File... Close All menu choice.  That closes everything and takes you to
the topcard screen.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 19:49:39 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Replying to the Digest
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> > e-mails.   Is there a way to respond to individual messages in the
> > Digest, using Post/LX.
>
> There was a shareware program for POST/LX that would allow you to do
> this.


do you recall the shareware program's name?  On super?

Thanks

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 13:55:59 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Theodore Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Theodore Heise <theise@NETINS.NET>
Subject:      Re: CloseAll
In-Reply-To:  <Pine.LNX.4.10.9911181158080.27010-100000@hplx.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 18 Nov 1999, David Sargeant wrote:

> On Thu, 18 Nov 1999, Robert Hocking wrote:
>
> > Am I reading you reply wrong?  I use more menu AT enter enter as a
> > macro assigned to FN+F10 to terminate all.  I looked at your macro and
> > could not get it to agree with anything on my LX. Could you elaborate
> > please?
>
> The macro Longden gave starts the Application Manager and goes to the
> File... Close All menu choice.  That closes everything and takes you to
> the topcard screen.

...unless you have applications open for which you have hacked
out the App Man entry!

To elaborate on David's elaboration, terminate all takes you
all the way out of the App Man to DOS.

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 20:37:46 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Using 200LX as WWW browser
Comments: To: Robert Hocking <hocking@FLASH.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>Like ebay for example.  I can't bid anymore.
.
>I have depended on my LX to browse for quite some time now, and
>I am running into more and more sites I can't get to.

They will go back to the earlier functional webdesign, if they figure
out, that more and more mobile phone WAP user can't bid anymore.
Hey they loose a lot of their customers!

-goe-

*** Goeldi Engineering
*** Webdesign, Usability and Information Architecture

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 20:42:25 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Fluff: Nokia 9110
Comments: To: Franklin Eekhout <franklin@ONLINE.NO>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>Gi blaffen i reglene Lars, bruk fornuften! :-)

Wow! I don't understand it, but it sounds very good.
What is it in english?

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 20:52:09 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Filer backup
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>> You can try commenting out a TSR at a time (add "rem" to the front of the
>line
>> in autoexec.bat/config.sys)
>
>config.sys reads "rem" too? (didn't know)

in config.sys you can use "rem" or ";"
in autoexec.bat use "rem" or ":" or better "::"

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 20:48:05 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: hp200lx hardware site?
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

It doesn't work since a long time.
I asked the list, if there is some interest in a new one, but get no reply
since now.
Hello?

-goe-


-----Original Message-----
From: David Sargeant <david@HPLX.NET>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Mittwoch, 17. November 1999 21:50
Subject: Re: hp200lx hardware site?


>On Tue, 16 Nov 1999, Tomas Moberg wrote:
>
>> What is the addres to the HP hardware compatibility site. I remember
>> there was a site that collected info on compatible gadgets.
>
>http://db.hplx.net
>
>I don't know how updated or complete it is, though.
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 14:59:21 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill A <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Undetermined address/swede mixup
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Martin wrote:


"Yes, my orginal emailaddress is 90199462@mobilpost which is my
cellular number but I have a alias =3Dmartin@mobilpost.com. This makes=
 it easier"

OK,I will check that with my ISP.But somehow it feels like the need=
 for an alias is bigger when fluffing :-)))))))))))))))


"So this problem is for real? I thought that I confused you and
that was
the problem,"

What!I misunderstood you!Ahh,so it was only that kind of mixup you did.We=
 speak too bad english apparently:-)


" Well I have tried it a couple of times. I will try it
out some more when I get my hp upgraded"

What kind of upgrade do you have in mind?


BTW,how do your boarder to Russia looks like nowadays?
I guess the number of tanks and machineguns have decreased significantly?


Lars Hedstrom/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 14:59:43 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill A <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Strange error message when sending email withh post/lx
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Martin wrote:

"It seems that this is the same error I get, but I get a error
message.
(Which btw  makes no sense)."


But I came to think of something,perhaps a clue?Didn't you say that=
 your errormessage said something about attachments?

In www/lx 1.1 is no attachmentspossibilities,perhaps therefore I don't=
 get any errormessage?


"If you continue to do this you should be able to isolate the
"problem"
lines."

Yes,but what a boring work,for every new two halves you must
connect to internet,you can have funnier with your lx,and as it happends=
 so seldom I don't think I will pay much attention to it,especially=
 not since I have decided to buy the Plus version.
The only problem now is how to get the money to dasoft,I haven't neither=
 Mastercard nor Visa.Checks they don't accept,Avi told me today that=
 it costs them $50 to draw a check from a non american bank!!!
Looks like the only possibility left is bootle post:-))


"I asked Andreas if this could be a bug in post/lx and he said
that it was
possible."

Somewhat worrying as you have the Plusversion.



"The two mails I had problems with was very long ones."

Yes,I forgot to mention that,I also only get this problem with long=
 emails.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 11:44:37 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: CloseAll
Comments: To: Robert Hocking <hocking@FLASH.NET>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Your macro closes everything, including AppMgr and goes to DOS.  Mine closes
everything except AppMgr.

{More} brings up icon screens
{Menu} brings up the menu bar
{Enter} selects "Applications" which is the default hi-light (same as your "A")
L  invokes "Close All", now you're back to your title screen
{More} brings up the AppMgr icon screen again.

I have both methods (yours and the above) assigned to two function keys
depending on whether I want to escape all the way to DOS, or whether I just want
to tidy up my icon desktop.

- Longden

PS Do you have an extra {enter} at the end of your macro?  Seems like it should
be AT{Enter}






Robert Hocking <hocking@FLASH.NET> on 11/18/99 11:39:52 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Robert Hocking <hocking@FLASH.NET>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: CloseAll





> What does this program give you as compared to a macro
> ({More}{Menu}{Enter}L{More}) ?
>
> - Longden

Am I reading you reply wrong?  I use more menu AT enter enter as
a macro assigned to FN+F10 to terminate all.  I looked at your
macro and could not get it to agree with anything on my LX.
Could you elaborate please?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 17:18:40 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Reinhard Mueller <molitor@01019FREENET.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Reinhard Mueller <molitor@01019FREENET.DE>
Subject:      Re: Other DOS Version on HP 200 LX
Comments: To: Martin_Doering@MN.MAN.DE
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Hi Martin,
>
> Has anybody ever tried to run another Version of Dos or f.ex. FreeDos on the
>
> HP?
> Does this need more memory (The system will have to be copied into the main
> memory?!?)? Could there be some advantage?

As far as I know, the hplx can only boot from the d: drive (from
the ROM). So you can only boot the built-in MS-DOS 5.0. This has
nothing to do with the autoexec.bat or config.sys which can be on
the C: drive (don't know about A:).

Anyway, you can use another shell instead of command.com, like
4dos.com (I recommend it).

Reinhard


Goin' Postal - HP 100/200LX (v3.08) REGISTERED

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 14:11:46 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Replying to the Digest
Comments: To: fjkaufman@WORLDNET.ATT.NET
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 18 Nov 1999 19:49:39 +0000, "F. Kaufman" <fjkaufman@WORLDNET.ATT.N=
ET> wrote:

> do you recall the shareware program's name?  On super?

It used to be on the D&A site. I don't remember the name.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 12:07:57 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Post/LX & Hotmail
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> On Thu, 18 Nov 1999, Jeff Johns wrote:
>
> > Unfortunately Hotmail is a web based service and not POP email, so
> > neither Post/LX or Goin' Postal is going to work.
>
> I think Hotmail has an option to give you POP access to your mailbox...

Possible. I believe Yahoo has that. The problem for Steve
will be to send mail OUT - because these services, while they
may or may not provide a POP3 server, will not provide a SMTP
server, so you cannot send email out. But then again, it is
free - so hard to complain to them about the value :-)

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 12:33:55 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Post/LX & Hotmail
In-Reply-To:  <199911182007.MAA11103@ftel.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 18 Nov 1999, A Meshar wrote:

> Possible. I believe Yahoo has that. The problem for Steve will be to
> send mail OUT - because these services, while they may or may not
> provide a POP3 server, will not provide a SMTP server, so you cannot
> send email out. But then again, it is free - so hard to complain to
> them about the value :-)

If SMTP is a problem, I won't mind if LXers on the go want to use hplx.net
as an SMTP server.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 12:42:07 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      1.2GB flash cards
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

SanDisk has 1.2GB Type II flash cards at Comdex, and with the proper
driver, they DO work in the 200LX.  Exciting, isn't it?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 14:34:03 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Post/LX & Hotmail
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 18 Nov 1999 12:33:55 -0800, David Sargeant <david@HPLX.NET> =
wrote:

> If SMTP is a problem, I won't mind if LXers on the go want to use =
hplx.net
> as an SMTP server.

<evil spam snicker>

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 14:39:16 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: Post/LX & Hotmail
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----_=_NextPart_001_01BF3204.FCC8C5DC"

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01BF3204.FCC8C5DC
Content-Type: text/plain

My wife can send email out using Outlook Express as the client for
Hotmail. What they do behind the scenes  is a mystery to me, but I do
know it works.

Steve

        > I think Hotmail has an option to give you POP access to your
mailbox...

        Possible. I believe Yahoo has that. The problem for Steve
        will be to send mail OUT - because these services, while they
        may or may not provide a POP3 server, will not provide a SMTP
        server, so you cannot send email out

------_=_NextPart_001_01BF3204.FCC8C5DC
Content-Type: text/html
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12">
<TITLE>RE: Post/LX &amp; Hotmail</TITLE>
</HEAD>
<BODY>

<P><FONT FACE=3D"Arial">My wife can send email out using Outlook =
Express as the client for Hotmail. What they do behind the scenes&nbsp; =
is a mystery to me, but I do know it works.</FONT></P>

<P><FONT FACE=3D"Arial">Steve</FONT>
</P>
<UL>
<P><A NAME=3D"_MailData"><FONT SIZE=3D2 FACE=3D"Arial">&gt; I think =
Hotmail has an option to give you POP access to your =
mailbox...</FONT></A>
</P>

<P><FONT SIZE=3D2 FACE=3D"Arial">Possible. I believe Yahoo has that. =
The problem for Steve</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">will be to send mail OUT - because =
these services, while they</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">may or may not provide a POP3 server, =
will not provide a SMTP</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">server, so you cannot send email =
out</FONT>
</P>
</UL>
</BODY>
</HTML>
------_=_NextPart_001_01BF3204.FCC8C5DC--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 14:52:42 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: Other DOS Version on HP 200 LX
In-Reply-To:  <E11oXr7-0004Bf-00@mx1.01019freenet.de> from "Reinhard Mueller"
              at Nov 18, 99 05:18:40 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> As far as I know, the hplx can only boot from the d: drive (from
> the ROM). So you can only boot the built-in MS-DOS 5.0.

Unless you prepare your own ROM, of course...

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 16:20:31 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      Re: 1.2GB flash cards
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thu, 18 Nov 1999 21:15:12 +0000 (GMT)

32m ago ...
On Thu, 18 Nov 1999 12:43:12 -0800 (PST), David Sargeant wrote:

> SanDisk has 1.2GB Type II flash cards at Comdex, and with the proper
> driver, they DO work in the 200LX.  Exciting, isn't it?

I'll say!! Did you get a spare one for me Dave?<VBG>

Do it take a long long time to "wake up" when you log into it with the
palmtop?

What about the price, probably around $3000 ? Or even more. Yikes!

Regards, Tony

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 13:44:14 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: 1.2GB flash cards
In-Reply-To:  <199911182120.QAA07271@hpamraaa.compuserve.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 18 Nov 1999, Tony Hutchins wrote:

> I'll say!! Did you get a spare one for me Dave?<VBG> Do it take a long
> long time to "wake up" when you log into it with the palmtop?

I didn't get a chance to see one; Mack Baggette and Hal Goldstein did,
though.  I suspect there's not much of a delay when the card is inserted
or accessed, but I could be wrong.

> What about the price, probably around $3000 ? Or even more. Yikes!

It'll probably be about $2 a meg for resellers, more for us end-users.
That seems to be the going price on Sandisk cards right now.  Again, I
could be wrong.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 15:44:50 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: 1.2GB flash cards
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 18 Nov 1999 13:44:14 -0800, David Sargeant <david@HPLX.NET> =
wrote:

> It'll probably be about $2 a meg for resellers, more for us end-users.
> That seems to be the going price on Sandisk cards right now.  Again, I
> could be wrong.

According to what Mack just emailed me they are right around $2500.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 13:44:07 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Replying to the Digest
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> On Thu, 18 Nov 1999 19:49:39 +0000, "F. Kaufman" <fjkaufman@WORLDNET.ATT.N
> ET> wrote:
>
> > do you recall the shareware program's name?  On super?
>
> It used to be on the D&A site. I don't remember the name.

Sorry, I have no recollection of anything like this.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 14:04:36 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      FS: PCMCIA Adapter by SCM Micro: SwapBox Classic SBI-D2P
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Check out their website: http://www.scmmicro.com/products/pccadap/pnp.htm

Tried it, didn't work with the obscure PCMCIA card I wanted to use, now I have a
motherboard with PCI slots only (the adapter takes ISA), so I can't use it
anymore. Simple to install, simple to use. Perfect for all those flashcards and
modems!

Bought originally for 45$. They now sell for about 33$ on dutch auctions on
Ebay. Looking for 25$+shipping.

Thanks!

Philippe

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 22:07:43 -0000
Reply-To:     Mike@ampersoft.co.uk
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Little <Mike@AMPERSOFT.CO.UK>
Organization: Ampersoft
Subject:      FLUFF: Re: Nokia 9110 Communicator
In-Reply-To:  <HPLX-L%99111801332050@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

On 17 Nov 99, at 22:20, Ashwin Balan wrote:
>You can run Dos Applications on the Communicator since Geos runs on top of
>Dos, as this is the case with the HP Onmigo100/120

Not true, It (GEOS on the communicator) does not run on top of DOS, what it has is a
customised equivalent of a BIOS and a portion of an 'IO.SYS/MSDOS.SYS'. Sort of.
And no there is no Microsoft code in there. The original code was a licensed clone.

Basically it has moved a long way from the old days of Geoworks Ensemble (and various
other names) on top of DOS.

Some one else said Geos is now freeware. No, The Geoworks ensemble is now developed
and distributed by NewDeal Inc. It is available as shareware trial. As was the old
Geos for years.

Try http://www.geoworks.com/technology/devices/9110/ for 9110 info.
By the way the US will never get the 9110 (it is only GSM 900/1800), but the US got
the 9000iL instead (9000 + more s/w + back light).

Anyway, waaaay off topic now!

Mike,
(An ex Geoworker who didn't work on the project.)




--
Mike Little <mike@ampersoft.co.uk>
work: <m.little@servicepower.com>
Web: http://www.ampersoft.co.uk
PGP public key at http://www.ampersoft.co.uk/mike/mike.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 16:11:21 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Replying to the Digest
Comments: To: A Meshar <sponsor@FTEL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 18 Nov 1999 13:44:07 -0800, A Meshar <sponsor@FTEL.NET> wrote:

> Sorry, I have no recollection of anything like this.

Darn it <g>, I thought it was on your web site. Where did I see it? It =
was
only like a $5 or $10 piece of software but it did add the replying =
option
to Post/LX with digest messages. Sorry, Avi, I thought I had seen it on =
your
little piece of cyberspace....

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 17:12:16 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rick Kozak <rick@COLLOQUIST.ON.CA>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rick Kozak <rick@COLLOQUIST.ON.CA>
Subject:      Re: Replying to the Digest
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

lxdr

> do you recall the shareware program's name?  On super?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 16:19:05 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: Replying to the Digest
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 18 Nov 1999 17:12:16 -0500, Rick Kozak <rick@COLLOQUIST.ON.CA> =
wrote:

> lxdr

Yup, that's it! Thanks!

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 16:20:58 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Fwd: hp omnibook 300
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

--- begin of forwarded message ---

From: "Anna Carolyn Osborn" <acosborn@wireco.net>
To: "Jeff Johns" <jeffj@scott.net>
Subject: hp omnibook 300
Date: Thu, 18 Nov 1999 22:15:08 -0000

Hello Jeff, do you happen to know where I could look for a manual for a =
HP
omnibook 300? I tried HP but couldn't find any info.  THANKS IN ADVANCE =
73,
Anna Osborn      ws4z@amsat.org

--- end of forwarded message ---

Does anyone have an extra book they can help my friend with?

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 14:26:34 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, katd@POCKETMAIL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Kat Deutscher <katd@POCKETMAIL.COM>
Subject:      Re: Replying to the Digest

Steve Soper wrote:

<I use my palmtop with Post/LX exclusively for all my emails.  Is there a way to respond to individual messages in the Digest, using Post/LX>
Rick Kozak has a very reasonably priced program ($4.95?) that allows you to reply to individual messages from a digest when also using Post/LX.  I used it extensively until connection problems with prodigy.net inspired me to seek other email options.  I am currently abstaining from ISP services.

Try contacting him at rick@colloquist.on.ca

-- Kat

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 15:18:23 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: CloseAll
Comments: To: MCHEM1@UCONNVM.UCONN.EDU
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thu, 18 Nov 1999 17:23:09 -0500 (EST)

07h04m40s ago ...
On Thu, 18 Nov 1999, Al Kind wrote:

> Thu, 18 Nov 1999 10:13:56 -0500 (EST)

> Does anyone know where I can get a copy of Hiro Sekiya's CloseAll
> program? Couldn't find it on SUPER or VECTOR(did I miss it?).

IIRC - Qman's right about it coming with Tasklist.  It's in an archive
callled bonus.lzh (I think).  If you're running XF, you can just do
Menu S to bring up the "Special" menu and select "Close all tasks".
Sorry, I don't remember the hotkey offhand, and anyway my "Special"
menu has been modified.


Later

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 14:50:06 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: FLUFF: Re: Nokia 9110 Communicator
In-Reply-To:  <E11oZih-000P8q-0K@tele-post-20.mail.demon.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 18 Nov 1999, Mike Little wrote:

> Anyway, waaaay off topic now!

I don't think so.  Anything dealing with GEOS and the like, and the future
of true palmtop computing, should be of interest to DOS LX users.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 17:56:15 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: CloseAll
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thu, 18 Nov 1999 16:29:32 -0500 (EST)

Indeed, it is in the TList120.lzh archive in a "Subarchive" omake.lhz

Cheers...AJKind

02h06m20s ago ...
On Thu, 18 Nov 1999, Quinton Jones Jr wrote:

> On Thu, 18 Nov 1999 10:18:31 -0500, Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
> wrote:
>
> > Does anyone know where I can get a copy of Hiro Sekiya's CloseAll
> > program? Couldn't find it on SUPER or VECTOR(did I miss it?).
>
> Hey Big AL,
>
> I have a copy and if I'm not mistaken it comes with TaskList in a bonus
> zip.
> Check it out and if not drop me a line and I'll send you a copy.
>
> Regards,
>
> Qman...
> HPLX.NET Affiliated - http://qman.hplx.net
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 15:14:59 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: CloseAll
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

For anybody who is interested here is the doc file that came with the
TaskList bonus.zip:

Bonus Programs (by-products of TaskList)


Here you have a selection of tools for those who want to Close
Filer (or conduct similar operations) as fast as possible in
pursuit of a gain in the range of milliseconds.  You should
better use ClearScreen Suppression in MoreEXM to reach maximum
speed.

For freaks only, not for general public <G>.

1 fclose.exm
Fclose.exm closes the Filer and terminates itself.  It can
close the Filer in Asleep status.

2 closeall.exm
Closeall.exm closes all the open tasks, including applications
started by MoreEXM and Asleep Filer.

3 terminat.exm
Terminat.exm terminates System Manager and transfer control to
DOS.

4 fulldos.exm
Fulldos.exm shells out to DOS with all the available memory.
If all the task are already closed, the memory available in
this DOS process is larger by 19 KB than those available
by adding "D:\DOS\COMMAND.COM| " to AppManager.



Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 18:45:03 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: 200LX for a journal
Comments: To: Curtis Cameron <curtc@AIRMAIL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I had never noticed that Memo offers encryption, but I just looked,
...
>
> My guess is that probably no one outside the LX development staff
> knows how it's encoded (yet), so your data should be safe for most
> purposes. However, it certainly wouldn't withstand a sustained attack.

HPCRACK.ZIP exists on SUPER to brute force crack the HP encryption and
show that it isn't very strong.  If you want good encryption why not
store your db files on a SecureDevice encrypted drive?

SecureDevice uses the IDEA cipher which is supposedly very good.
SecureDevice can be found on SUPER: SECDEV14.ZIP

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 18:45:07 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Found Cheap 200lx's and accessories
Comments: To: Ashwin Balan <husk469@NETZERO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Which Fry's??  I just went to the on Brokaw Rd in San Jose, CA and they
don't have and their computer doesn't show any in other area stores.

cheers... Russ

> Last week I went to Fry's electronics and bought a brand new 4mb Hp200lx
> for 253.99 with sales tax, it was a really good deal.  Whats even better is
> that I saw that they had brand new  ACE 14.4/4mb combo's for 99 dollars.
> The Ace 14.4/8mb were 139.00.  Are these good prices??  I could bargain
> with the manager to get the 8mb cards down to 110 dollars.  The Store that
> I went to had about 10, 4 meg units and 3 8 meg units.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 19:58:36 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Can't get HV to show sites
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Ok, what am I doing wrong (this time)?

Up till recent I ran a 4M 200LX so I erased HV and its files as I
couldn't afford the space they took.  I now have space on my 32M so I
thought I'd give HV another try.  I've got all the files in my C:\WWWLX\
directory and I've edited the CFG file (below).  I run WWW and it goes
online ok and then starts HV which opens its default home file.
I select DASoft's site and the screen blanks and then ...nothing...

I don't see any send or receive data lights flashing on my modem.
I finally give up and ESC back and then quit.

So... what didn't I setup correctly?

cheers... Russ


-------------------------------------------------------------------
; Configuration file for HV (HTML Viewer)
; A. Garzotto, 04-Sep-98

; -------- Global settings --------

System
Root=c:\wwwlx
Editor=c:\bin\t.exe
IndexDir=c:\wwwlx\temp
CacheDir=c:\wwwlx\temp
LXPIC=Yes
Tables=No
Links=Yes
Download=C:\DOWNLOAD\
PostFile=C:\POST.DAT
Japanese=0

; --------- Font configuration --------

Fonts
Normal=lucs15.hfn
Bold=lucs15b.hfn
Italic=lucs15i.hfn
H1=lucs15k.hfn
H2=lucs15bi.hfn
H3=lucs15b.hfn
H4=lucs15i.hfn
Fixed=luct13b.hfn

; ---------- Special documents ---------

Docs
Home=home.htm

; ---------- External Viewers ----------

Viewers
JPG=C:\BIN\LXPIC %s

; ---------- External Service Handlers ----------

Services
mailto=post +%s +%s
telnet=telnet %s

; ---------- MIME type to file extension mappings ----------

MIME
text/postscript=PS

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 20:07:35 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              FRiC <frac@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         FRiC <frac@POBOX.COM>
Subject:      Re: Post/LX & Hotmail
Comments: To: ssoper@PROBOLINGGO.WASANTARA.NET.ID
In-Reply-To:  <16EBD8A2C5C@probolinggo.wasantara.net.id> from Steve Soper at
              "Nov 18, 99 09:41:11 am"
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> Can Post/LX (really WWW/LX) be set up to use "Hotmail"?
>
> I really like Post/LX, but it would be nice to be able to use it with
> Hotmail since I travel so much.  Almost all of my travels are in Asia.

You need to have HTTP mail support to download mail from Hotmail. Does
Post/LX have this?

Or you can try switching to another web-based e-mail service that supports
POP3, such as Yahoo Mail.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 09:08:49 +0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "R.S." <rogerswn@CTIMAIL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "R.S." <rogerswn@CTIMAIL.COM>
Subject:      Hotmail
Mime-Version: 1.0
Content-Type: multipart/alternative; boundary="42242783"

This is a multipart message in MIME format

--42242783
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

I believe that Hotmail only works with Outlook Express and may be other M$
mail client.
Yahoo mail on the other hand provides pop3 & smtp mail server that can be
accessed by using general pop3 mail client.

Roger S.
-- R.S., rogerswn@ctimail.com on 11/19/1999 at 9:03:58 AM

--42242783
Content-Type: text/html
Content-Transfer-Encoding: Quoted-Printable

<html><head></head>
<body>
<table><tr><td>
<font size=3D"0" color=3D"#000000" face=3D""></font><font size=3D"3"=
 color=3D"#000000" face=3D"MingLiU">I believe that Hotmail only works=
 with Outlook Express and may be other M$ mail client. &nbsp;
<br>
Yahoo mail on the other hand provides pop3 &#38; smtp mail server=
 that can be accessed by using general pop3 mail client.
<br>

<br>
Roger S.
<br>

</font></td></tr></table><table><tr><td>
-- R.S., rogerswn@ctimail.com on 11/19/1999 at 9:03:58 AM<br>
</td></tr></table>
</body></html>

--42242783--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 17:20:50 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ashwin Balan <husk469@NETZERO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ashwin Balan <husk469@NETZERO.COM>
Subject:      Re: Found Cheap 200lx's and accessories
Comments: To: Russel Brooks <rlbrooks@pobox.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

The Fry's in Anaheim California I'm going to go back tommorow to see what
they have left.

----------
> From: Russel Brooks <rlbrooks@pobox.com>
> To: HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Ashwin Balan
<husk469@NETZERO.COM>
> Subject: Re: Found Cheap 200lx's and accessories
> Date: Thursday, November 18, 1999 5:18 PM
>
> Which Fry's??  I just went to the on Brokaw Rd in San Jose, CA and they
> don't have and their computer doesn't show any in other area stores.
>
> cheers... Russ
>
> > Last week I went to Fry's electronics and bought a brand new 4mb
Hp200lx
> > for 253.99 with sales tax, it was a really good deal.  Whats even
better is
> > that I saw that they had brand new  ACE 14.4/4mb combo's for 99
dollars.
> > The Ace 14.4/8mb were 139.00.  Are these good prices??  I could bargain
> > with the manager to get the 8mb cards down to 110 dollars.  The Store
that
> > I went to had about 10, 4 meg units and 3 8 meg units.
>
__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 19:21:24 -0600
Reply-To:     jhope@enoinc.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "ENOINC - John S. Hope" <jhope@ENOINC.COM>
Subject:      Re: Hotmail
Comments: To: "R.S." <rogerswn@CTIMAIL.COM>
In-Reply-To:  <199911190102.JAA00016@smtp01.hk.linkage.net>
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----=_NextPart_000_0013_01BF31FA.1A3C7CE0"

This is a multi-part message in MIME format.

------=_NextPart_000_0013_01BF31FA.1A3C7CE0
Content-Type: text/plain;
        charset="US-ASCII"
Content-Transfer-Encoding: 7bit

Hotmail only works with browers, not POP3 clients.  Also, Yahoo only allows
POP3 access if you subscribe to their Yahoo Delivers! program which floods
your inbox with ads.


 -----Original Message-----
From: HPLX Mailing List mailto:HPLX-L@UCONNVM.UConn.EduOn Behalf Of R.S.
Sent: Thursday, November 18, 1999 7:09 PM
To: HPLX-L@UCONNVM.UConn.Edu
Subject: Hotmail


        I believe that Hotmail only works with Outlook Express and may be
other M$ mail client.
        Yahoo mail on the other hand provides pop3 & smtp mail server that
can be accessed by using general pop3 mail client.

        Roger S.

        -- R.S., rogerswn@ctimail.com on 11/19/1999 at 9:03:58 AM



------=_NextPart_000_0013_01BF31FA.1A3C7CE0
Content-Type: text/html;
        charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Dus-ascii" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2919.3800" name=3DGENERATOR></HEAD>
<BODY>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D454031901-19111999>Hotmail only works with browers, not POP3=20
clients.&nbsp; Also, Yahoo only allows POP3 access if you subscribe to =
their=20
Yahoo Delivers! program which floods your inbox with =
ads.</SPAN></FONT></DIV>
<DIV><SPAN class=3D454031901-19111999></SPAN><FONT =
face=3DTahoma></FONT>&nbsp;</DIV>
<DIV><FONT face=3DTahoma><BR></FONT><FONT face=3DTahoma><FONT =
size=3D2><SPAN=20
class=3D454031901-19111999>&nbsp;</SPAN>-----Original =
Message-----<BR><B>From:</B>=20
HPLX Mailing List mailto:HPLX-L@UCONNVM.UConn.Edu<B>On Behalf Of=20
</B>R.S.<BR><B>Sent:</B> Thursday, November 18, 1999 7:09 =
PM<BR><B>To:</B>=20
HPLX-L@UCONNVM.UConn.Edu<BR><B>Subject:</B> Hotmail<BR><BR></DIV></FONT>
<BLOCKQUOTE></FONT>
  <TABLE>
    <TBODY>
    <TR>
      <TD><FONT color=3D#000000 face=3D"" size=3D0></FONT><FONT =
color=3D#000000=20
        face=3DMingLiU size=3D3>I believe that Hotmail only works with =
Outlook=20
        Express and may be other M$ mail client. &nbsp; <BR>Yahoo mail =
on the=20
        other hand provides pop3 &amp; smtp mail server that can be =
accessed by=20
        using general pop3 mail client. <BR><BR>Roger S.=20
    <BR></FONT></TD></TR></TBODY></TABLE>
  <TABLE>
    <TBODY>
    <TR>
      <TD>-- R.S., rogerswn@ctimail.com on 11/19/1999 at 9:03:58=20
    AM<BR></TD></TR></TBODY></TABLE></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_0013_01BF31FA.1A3C7CE0--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 09:34:17 +0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Anand Rao <slim1005@HK.SUPER.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Anand Rao <slim1005@HK.SUPER.NET>
Subject:      Re: Post/LX & Hotmail
In-Reply-To:  <Pine.LNX.4.10.9911181140220.27010-100000@hplx.net>
Mime-Version: 1.0
Content-Type: multipart/alternative;
              boundary="=====================_247806078==_.ALT"

--=====================_247806078==_.ALT
Content-Type: text/plain; charset="us-ascii"; format=flowed

I am exploring using Post/LX on the road with an ISP service with reliable
roaming services. Shouldn't this be a better option than Hotmail with its
slow response times?

At 11:41 AM 18-11-1999 Thursday -0800, David Sargeant wrote:
>On Thu, 18 Nov 1999, Jeff Johns wrote:
>
> > Hmmm... this may require an investigation...
>
>It might be a paying option, but for LX users who are on the road a lot,
>it might be a nice way to get your mail via either web or on the palmtop.
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--=====================_247806078==_.ALT
Content-Type: text/html; charset="us-ascii"

<html>
<font size=3>I am exploring using Post/LX on the road with an ISP service
with reliable roaming services. Shouldn't this be a better option than
Hotmail with its slow response times?<br>
<br>
At 11:41 AM 18-11-1999 Thursday -0800, David Sargeant wrote:<br>
<blockquote type=cite cite>On Thu, 18 Nov 1999, Jeff Johns wrote:<br>
<br>
&gt; Hmmm... this may require an investigation...<br>
<br>
It might be a paying option, but for LX users who are on the road a
lot,<br>
it might be a nice way to get your mail via either web or on the
palmtop.<br>
<br>
** HPLX-L LIST Info at
<a href="http://www.sp.uconn.edu/~mchem1/HPLX.shtml" eudora="autourl">http://www.sp.uconn.edu/~mchem1/HPLX.shtml</a></font></blockquote></html>

--=====================_247806078==_.ALT--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 20:48:40 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Nokia 9110 Communicator/will HP200LX run GEOS?

Hi All,

I've been viewing the conversation about the Nokia 9110 Communicator with
some interest. I've got a few questions about it:

1. Can anyone verify that it can actually run a small DOS program?
2. Does it have a small keyboard?
3. How much memory does it have?
4. Does it surf the web?

If questions 1,2 and 4 are "yes"s and it has enough memory and DOS
programs and initial data files could be downloaded from the internet
with the Nokia 9110, then some DOS programs might be able to be run on
the Nokia 9110. If so, that would hold some interest for me.

An entirely different thought:

I have the original GEOS disks somewhere that I got with a 286 laptop
computer many years ago. I wonder if it would be worth my while to start
looking for them. Could the HP200LX possibly run an early version of
GEOS?

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 21:07:38 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: HPLX-L Digest - 16 Nov 1999 to 17 Nov 1999 - Special issue

Hi Al,

>There is an archive of the month's HPLX-L DIGESTs on the HPLX-L COMMAND
>CENTER page (see below for URL).
>
>08h39m54s ago ...
>On Thu, 18 Nov 1999, John J Vanderstel wrote:
>
>> Digest subscribers,
>>
>> Would someone please cut and paste the above labeled digest into a
>> private email to me?  It's the one that started with, "There are 44
>> Messages totalling 1512 lines in this issue."
>>
>> ...
>
>
>*
>* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
>* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

As you can see from the above quote, you included no URL in that post,
however, I did see it in the next post you made:  "HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml"

Thanks for pointing that out, Al. I'll go check it out. Email digest
users are not really intimately familar with that site and all that it
contains.

Hopefully it offers the particular one day archive for download that I'm
looking for, since it would next to impossible to identify all of the
posts that I'm missing (and have never seen) from one giant November
archive. I also don't do much live on the internet either since I can
usually read email digests while offline.  That's why I requested that a
digest subscriber please cut and paste one particular archive into a
private email to me.

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 21:45:37 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Post/LX & Hotmail
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> If SMTP is a problem, I won't mind if LXers on the go want to use hplx.net
> as an SMTP server.

Nice offer David!  However I'm confused (again).  If you have some sort
of ISP to get 'online' then wouldn't that also provide email access to
POP and SMTP?  How can you get online and still need to find some other
email services?  Are there ISPs that don't provide email servers?

I've been using IBM.NET, I haven't experienced other environments.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 21:45:45 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Replying to the Digest
Comments: To: Steve Soper <ssoper@PROBOLINGGO.WASANTARA.NET.ID>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I receive the List by the Digest form.  It is much better for me to

Steve,
Let me guess that the flood of individual posts overwhelms your email
inbox and that is why you want to contain the hplx-l list into a single
digest.  If I'm right then there is an alternate way to handle the list
but keep it as individual posts.  What you do is set up www/lx to filter
the incoming emails; when it sees hplx-l stuff it puts those into a
separate folder instead of your normal email inbox.  I've recently done
this and it works VERY well and no separate tools are needed.

Let me know if you want more info.

cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 22:34:56 -0500
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: WWW/LX Plus a flop??
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Stephan Goeldi wrote:


"And not to forget, that the phone time in Europe
is not as cheap as in the US."

How cheap are they then in US?



Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 13:35:44 +0100
Reply-To:     Paulo.Custodio@alcatel.de
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@ALCATEL.DE>
Organization: Alcatel
Subject:      Special keys in PALRUN running PE/PIM
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I am going to send my 200LX for a 32M-DS upgrade next week, and will use
my Toshiba notebook as a spare unit, running PE/PIM on top of PALRUN,
anc CPACK.

Question: how can I press the HPLX special keys in the notebook running
PE on PALRUN?

Keys: Fn-, (date) Fn-. (time) Fn-num-. (cut) Fn-= (copy) Fn-+ (paste)

Thanks in advance,
Paulo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 20:44:10 +0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Eng. & Industrial Projects" <danaan@OPERA.IINET.NET.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Eng. & Industrial Projects" <danaan@OPERA.IINET.NET.AU>
Subject:      Re: Nokia 9110 Communicator/will HP200LX run GEOS?
Comments: To: John J Vanderstel <j_vanderstel@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> 1. Can anyone verify that it can actually run a small DOS program?

No Geos itself cannot run a DOS program, but the actual software
is installed on a DOS PC, from memory you cannot shell to DOS
a la windows and run a DOS application (I used to run GeoWorks
Ensemble  on a 286 Laptop 8-) )

> 2. Does it have a small keyboard?

Yes, I think it is too small 8-(

> 3. How much memory does it have?

Only 2Mb from memory, though I could be wrong possibly 4

> 4. Does it surf the web?

I believe of a fashion,

> I have the original GEOS disks somewhere that I got with a 286 laptop
> computer many years ago. I wonder if it would be worth my while to start
> looking for them. Could the HP200LX possibly run an early version of
> GEOS? Cheers!> John Vander Stel

It ran only passible on a 286 on even a doublespeed LX I think you
would find it painfully slow.

Regards......Liam
Bunbury, Western Australia

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 13:27:14 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Can't get HV to show sites
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Some on the list told, that it worked the second time.
So reboot and try it again. Or did you already?

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 13:19:26 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Nokia 9110 Communicator/will HP200LX run GEOS?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Think about the HP OmniGo 700 LX too. It is 98% 200LX-compatible
(there is a little difference with the chips, the EMS-emulation doesn't
work on the 700LX). It has a mobile phone dock for the Nokia 2110
and 2110i. A compatible Philips phone plugs in too. The GSM card
is already in the machine. You plug your phone in and connect to the
internet. WWW/LX works. ccLXPOP works too. Fax and SMS of course.
The screen is very very little smaller than the 200LX. The keyboard is
the same. It seems, that this one is the LX-version of the communicator.
Some of my colleagues thought it IS the communicator.

>1. Can anyone verify that it can actually run a small DOS program?
>2. Does it have a small keyboard?
>3. How much memory does it have?
>4. Does it surf the web?

The OmniGo 700LX: Yes, as on the 200LX

>Could the HP200LX possibly run an early version of
>GEOS?

Yes. There were some threads about this. Check the archives
of this summer.


-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 13:14:07 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: WWW/LX Plus a flop??
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

There are some stories of little cities in the states, where telephone
costs are as cheap that they can start their connection early in the
morning and shut it down before they go to bed. On the screen run
some active desktop crap and the Mail program of course checks
all 5 minutes. The only comparable prices are the mobile phone
prices (comparable with our land line prices). My monthly phone
invoice is about CHF 300 (swiss francs), i.e. about US$ 450.
And it is NORMAL! This includes only local calls.

This is perhaps not the whole truth for the US, because it seems, that it
differs much over the country. Here in middle Europe we say:
"If you have to download something really large (e.g. a MS Service
Pack), do it, before the americans awake (i.e. before 11.00 a.m.)."
After this time, some 'Internet'-server become veeeryyyy slooow.

-goe-

-----Original Message-----
From: Lars Hedstroem <nxw988e@TNINET.SE>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Freitag, 19. November 1999 04:35
Subject: Re: WWW/LX Plus a flop??


Stephan Goeldi wrote:


"And not to forget, that the phone time in Europe
is not as cheap as in the US."

How cheap are they then in US?



Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 07:31:32 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: Post/LX & Hotmail
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> If SMTP is a problem, I won't mind if LXers on the go want to use =
hplx.net
> as an SMTP server.

How would I go about doing this?

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 04:11:59 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: Replying to the Digest
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 18 Nov 1999 13:44:07 -0800, A Meshar <sponsor@FTEL.NET> wrote:

> > On Thu, 18 Nov 1999 19:49:39 +0000, "F. Kaufman" <fjkaufman@WORLDNET.A=
TT.N
> > ET> wrote:
> >
> > > do you recall the shareware program's name?  On super?
> >
> > It used to be on the D&A site. I don't remember the name.
>
> Sorry, I have no recollection of anything like this.



Hi Gang,

Its called LXDR.

LXDR is a custom reader for mailing list digests.
The program takes a digest file, extracts the subjects of each message =
and
presents them to you in a scrollable list at the top of the screen.
Moving from subject to subject changes the displayed message in the =
remainder
of the screen. Copyrighted freeware.

Details are in the archive on a commercial version that will append =
selected
messages to POST/LX mailboxes.


HTH


Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 05:54:34 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Re: WWW/LX Plus a flop??
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Stephan Goeldi wrote:
>
> "And not to forget, that the phone time in Europe
> is not as cheap as in the US."
>
> How cheap are they then in US?
>
> Lars Hedstroem/Sweden

Without pre-paying any minutes in advance, I pay a little under
$10.00 a month for my monthly service, then pay 21 cent peak,
and 12 cent off-peak.  The peak time is 6:00 A - 10:00 P.  I
also pay an additional $9.99 a month to get unlimited weekend
usage.

For $14.95 a month extra I could get unlimited evening &
weekends, but because I start work at 6:00 A, I usually am in
bed just after 10:00 P, so the evening plan would not do me any
good.  There are also many different pre-paid plans available
from many different cell providers.  My brother pays like
$130.00 a month for 1500 minutes a month.

People that usually do this only now have a cell phone, and no
landline where ever they hang their hat.  The latest wave is the
pre-paid packages that cover not only your local calls, but also
your long distance minutes, in the continental U.S..

More and more people are just starting to attempt to eliminate
their home phones, and replace them with one phone.  Me
personally, I don't have intentions on doing this.  I like
having both.



Robert Hocking

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 06:47:27 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Mberri01@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Michael Berrier <Mberri01@AOL.COM>
Subject:      HPLX Built-in phone appl
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Hi list,

I'm struggling for a couple of days and can't get it done!!

I'm unable to put a new categorie in my phone data base as soon as I press
enter or F10 the input disappears and did not stay in the list.
Does anybody have the right hint for me.

Thanks in advance, Michael

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 03:37:32 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Hotmail
Comments: To: "R.S." <rogerswn@CTIMAIL.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

"R.S." <rogerswn@CTIMAIL.COM> posted:

> I believe that Hotmail only works with Outlook Express and may be other M$
> mail client.
> Yahoo mail on the other hand provides pop3 & smtp mail server that can be
> accessed by using general pop3 mail client.

Yahoo provides POP3 and SMTP server access IF you chose to let
them send you their offers spam.

I suppose you could open an account, and never d/l their spam,
just use their SMTP.

For Steve's question: He still has a problem: He needs to
connect to some ISP in order to either get to Yahoo for
Web-based email or to access the POP3/SMTP of Yahoo (or any
other ISP, for that matter!)

If I understood right, his issue is that connecting to ISPs is
expensive. He would like to use post/ to somehow connect to
Yahoo (which is not an ISP - and so it will not be possible)
and get his email.

Problem is - Yahoo is not an ISP. So there is no login servers
to connect to.

The alternative is to somehow connect the Palmtop to whatever
connection he has at work, at an internet cafe, and then do
his access to email, but I am afraid I cannot even begin to
think how to help in this.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 03:37:38 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Post/LX & Hotmail
Comments: To: Russel Brooks <rlbrooks@POBOX.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Russ,

> > If SMTP is a problem, I won't mind if LXers on the go want to use hplx.net
> > as an SMTP server.
>
> Nice offer David!  However I'm confused (again).  If you have some sort
> of ISP to get 'online' then wouldn't that also provide email access to
> POP and SMTP?  How can you get online and still need to find some other
> email services?  Are there ISPs that don't provide email servers?
>
> I've been using IBM.NET, I haven't experienced other environments.

If you take up one of the free email accounts, you quickly
find that mostly they will let you have a free POP3 account to
_receive_ email. You then read it on the Web. Some, like
Yahoo, will provide access to the POP3 account from another
server - i.e. you login to your IBM, and Post/LX will also
visit the Yahoo POP3.

Yahoo, and others, will also provide you with access to SMTP
server to send email _out_. So now you can use the hpne number
of your IBM account, let Post/LX visit your IBM email account,
and then visit your Yahoo email account, and get your email.
You could even send email _out_ using the Yahoo SMTP mailbox,
much like you do with the IBM SMTP server.

In the case of Steve Soper, he wanted to use something to
bypass logging into an ISP, and the cost that goes along with
this.

I am afraind it is tough to find.

Here are his options:

1. Get a Yahoo account (or any other free account) and only
use Web-based email. This means he will have to use some Web
terminal at work, or at a friend's house, or Internet Cafe.

Pro: Cheap - cost is basically zero.

Con: Not exactly private, you have to find _some_ machine
somewhere connected to the Web. You are tethered to a terminal
to read and reply to email.

2. Get a Yahoo account (or another similar freebie) and signup
for the ads, so he can use their POP3 and SMTP servers. To
access these, he will HAVE to have some local connection to
the web via some ISP.

PRO: Privacy is improved. Can do it on the Palmtop. Can still
access email on some Web-connected terminal (not HV, since
mostly these services use Javascript to display email).

CON: Costs money.

3. Get a local ISP and use their POP3 and SMTP access, forget
about Yahoo.

PRO: Palmtop, privacy

CON: Costs money. If he moves, he has new email address.

4. Get a local ISP and use Yahoo POP3 and SMTP.

Pro: privacy, palmtop, if moves, Yahoo address remains.

CON: costs money, cancellation.

5. Get a Roaming account. This is arranged among ISPs wwhich
"host" your account temporarily while you are in their
vicinity.

PRO: Stable account id. Palmtop access ok (mostly). Privacy.

CON: Usually costs more, harder to login, and varies among
ISPs, depending on the service.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 03:37:26 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Replying to the Digest
Comments: To: Jeff Johns <jeffj@scott.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> > Sorry, I have no recollection of anything like this.
>
> Darn it <g>, I thought it was on your web site. Where did I
> see it? It was only like a $5 or $10 piece of software but
> it did add the replying option to Post/LX with digest
> messages. Sorry, Avi, I thought I had seen it on your little
> piece of cyberspace....
>
> Jeff

I wish you had the name! I have just been unsuccessfully
haranguing Andreas in the Beta to add such a function to
Post/LX, but he quotes me this mysterious software :-) ...
(Proof that he reads what you write carefully! :-) ...)
I think you may think of LXDR by Rick Kozack. Its version
0.99P is a commercial ($4.95) item that is an add-on to
Post/LX. I just found it on the SUPER, btw...

I am writing to Rick on this pass.

  Avi M. D&A
  http://www.dasoft.com

>   >            ---- Jeff Johns W4JEF - Reserve Patrol
Captain ---- >            ---    Jefferson County Sheriff's
Department    --- >            ---           Birmingham,
Alabama USA           --- >            ---  Finger
jeffj@scott.net for my PGP RSA Key  --- >

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 03:37:35 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Post/LX & Hotmail
Comments: To: Anand Rao <slim1005@HK.SUPER.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I am exploring using Post/LX on the road with an ISP service with reliable
> roaming services. Shouldn't this be a better option than Hotmail with its
> slow response times?

Possibly. Look at GRIC as one of the roamers.I believe Andreas
had some experience with them... Anyone else?

BTW, Anand - it would help in the list to turn off the various
HTML versions and what have you which you send along with your
post. It is really easy to tell Eudora to stop producing
everything in HTML also - all it does is doubles each of your
posts, with the same info.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 03:37:29 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Replying to the Digest
Comments: To: Rick Kozak <rick@COLLOQUIST.ON.CA>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Rick Kozak <rick@COLLOQUIST.ON.CA> wrote:

> lxdr
>
> > do you recall the shareware program's name?  On super?

I just discovered your software on the SUPER :-)

Am writing separately. I want to look at your software,
please.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 03:06:45 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: 200LX for a journal
In-Reply-To:  <HPLX-L%99111818450417@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 18 Nov 1999, Russel Brooks wrote:

> HPCRACK.ZIP exists on SUPER to brute force crack the HP encryption and
> show that it isn't very strong.  If you want good encryption why not
> store your db files on a SecureDevice encrypted drive?

I don't think it's a brute force crack; doesn't "brute force" imply just
testing passwords and letter/number combos until you find one that works?
HPCRACK works by employing knowledge of the algorithm and method used to
encrypt the files.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 11:01:39 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: Can't get HV to show sites
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Russ,

> I don't see any send or receive data lights flashing on my modem.
> I finally give up and ESC back and then quit.
>
> So... what didn't I setup correctly?

Who is your ISP provider?

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 09:18:45 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: PCMCIA Modem
Comments: To: Martin_Doering@MN.MAN.DE
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi,

> What will happen, if it is for example 800 mA? Will my 200 LX break or will it
> just not functioning?

BE CAREFUL!
It could destroy your motherboard. Nobody knows if it WILL, but I think
you should not try it - or at least if you want to try it, take it out
once you recognize some strange behaviour like screen contrast
disappearing or heat developing...

Do you want to have a modem that needs less than 150 mA?
I have one in spare, that I don't need, and I'm also living in Germany.
So I could sell it to you, if you want. Please contact me off list, if
you need it.

It's a SCM Fax/Modem card 14.400 with a German TAE-N phone plug. Works great
with the HPLX.

GTX
daniel

--
-------------------------------------------------------
Daniel Hertrich                       d.hertrich@gmx.de
homepage:                        http://daniel.hplx.net
telephone:                         +49 (0)177 795 55 49
-------------------------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 10:11:04 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Franklin Eekhout <franklin@ONLINE.NO>
Subject:      Re: Nokia 9110 Communicator/will HP200LX run GEOS?

> 1. Can anyone verify that it can actually run a small DOS program?

Haven't tried to, and now that my friend's one is stolen...

> 2. Does it have a small keyboard?

Yes, but the buttons are softer. I would rather type text on the 9110 than
the LX. I think.

> 3. How much memory does it have?

2 MB... My friend had a 500 kB .wav file that triggered every time he got an
SMS. :-)

> 4. Does it surf the web?

Yep! And email. and fax. We used it on Yahoo and Alta Vista too.

> with the Nokia 9110, then some DOS programs might be able to be run on
> the Nokia 9110. If so, that would hold some interest for me.

Screen size... It's graphical, didn't see any character based screen on boot
up.

> I have the original GEOS disks somewhere that I got with a 286 laptop
> computer many years ago. I wonder if it would be worth my while to start
> looking for them. Could the HP200LX possibly run an early version of
> GEOS?

It might. Try it! Let us know.

br

Franklin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 01:23:05 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Orin Keplinger <orink@IX.NETCOM.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Orin Keplinger <orink@IX.NETCOM.COM>
Subject:      Re: Other DOS Version on HP 200 LX
Comments: To: Longden_Loo@CANDLE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

I have loaded several DRDOS files like xcopy.exe on my HP95. They run fine
under the DOS 5.0 command.com and offer /options not found with the DOS 5.0
versions of the same.

Orin

----------
> From: Longden Loo <Longden_Loo@CANDLE.COM>
> To: HPLX-L@UCONNVM.UConn.Edu
> Subject: Re: Other DOS Version on HP 200 LX
> Date: Thursday, November 18, 1999 10:07 AM
>
> >Has anybody ever tried to run another Version of Dos
> >or f.ex. FreeDos on the HP?
>
> The problem on the LX is that the DOS 5.0 kernel is loaded from ROM, and
from
> there it loads the autoexec.bat and config.sys.  Similar to if the boot
record
> of a boot disk were implanted in ROM.  Hence there are limitations to
what it
> can load, and I don't believe anyone has been successful in loading and
running
> a DOS 6.x on the LX, let alone a non-MS version.
>
> Loaders do apparently exist that would allow Minix (a small Unix
implementation)
> with limitations, but I don't know how applicable that loader would be in
> regards to another DOS version (a Mack or David question perhaps).
>
> - Longden
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 18:03:55 +10
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Alain <wyn@COMCEN.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Alain <wyn@COMCEN.COM.AU>
Subject:      Re: 200LX for a journal
Comments: To: Nathalie Bugeaud <tps-seti@WANADOO.FR>,
          Nathalie Bugeaud <tps-seti@WANADOO.FR>
In-Reply-To:  <004701bf312d$5b2c9140$8f85fcc1@oemcomputer>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

I would be nice to have some sample.
can you send some file?
amicalement
alain

> my 2c
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>


Al
Wyn@comcen.com.au
Melbourne / Australia

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 23:01:20 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Organization: Orion Enterprises
Subject:      Re: Other DOS Version on HP 200 LX
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="------------05BF13CEAE713F9E92AB505F"

This is a multi-part message in MIME format.
--------------05BF13CEAE713F9E92AB505F
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

What about when you hold down Alt while booting; it gives you boot
options like "Boot from A:..."  Anyone willing to try that?
I don't presently have an extra flash card to try it with, but I will
soon and I'll try it with DOS 6.22.

- Richard

--------------05BF13CEAE713F9E92AB505F
Content-Type: text/x-vcard; charset=us-ascii;
 name="rsmith.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Richard A. Smith / Patti Smith
Content-Disposition: attachment;
 filename="rsmith.vcf"

begin:vcard
n:Smith;Richard and Patti
x-mozilla-html:FALSE
org:Orion
adr:;;;;;;
version:2.1
email;internet:rsmith@enol.com
note;quoted-printable:aka, on eBay: seronac@auction.skytel.com=0D=0A*=0D=0A"Statistically, at least half of the people in the world are of below-average intelligence." * =0D=0A"If variety is the spice of life, then humor is the dessert." *
fn:Richard and Patti Smith
end:vcard

--------------05BF13CEAE713F9E92AB505F--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 23:33:59 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: 1.2GB flash cards
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<I didn't get a chance to see one; Mack Baggette and Hal Goldstein did,
though.  I suspect there's not much of a delay when the card is inserted
or accessed, but I could be wrong.

> What about the price, probably around $3000 ? Or even more. Yikes!

It'll probably be about $2 a meg for resellers, more for us end-users.
That seems to be the going price on Sandisk cards right now.  Again, I
could be wrong.>>

Just came back from dinner enjoying the company David Sargeant and Mack.

Mack and I went to the Sandisk booth on Monday. Long story but we got VERY
lucky and were able to test the 1.2 Gig card using Mack's new driver on the
200LX. Worked like a charm.

As to the cost, we asked.  The Sandisk guy said the card cost about $1.5
million as the one and only prototype. Realistically, it seems the card is
about a year away before available.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 05:16:01 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: 1.2GB flash cards
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> SanDisk has 1.2GB Type II flash cards at Comdex, and with the proper
> driver, they DO work in the 200LX.  Exciting, isn't it?

I'm sure - if you have two hundred or so shares of Microsoft stock to
sell!!!! (G)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 00:08:10 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peter W <peterw@USA.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peter W <peterw@USA.NET>
Subject:      Re: Post/LX & Hotmail
In-Reply-To:  <19991119050110.13985.qmail@nm199.netaddress.usa.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

At 12:00am Nov 19, 1999, Automatic digest processor wrote:

> Date:    Thu, 18 Nov 1999 21:45:37 -0500
> From:    Russel Brooks <rlbrooks@POBOX.COM>
> Subject: Re: Post/LX & Hotmail
>
> > If SMTP is a problem, I won't mind if LXers on the go want to use hplx.net
> > as an SMTP server.
>
> Nice offer David!  However I'm confused (again).  If you have some sort
> of ISP to get 'online' then wouldn't that also provide email access to
> POP and SMTP?

Plus you'd probably have to set up hplx.net as an open mail relay for this
to work, which would mean potential abuse of hplx.net, increased junk
email (though not necessarily to Post/LX users), and hplx.net possibly
ending up in a list of known relay sites, thereby automatically becoming
untrusted by many mail servers all over, making it worthless to the
folks who were using it with Post/LX... :-( Folks should get SMTP service
from whoever provides their network connection.

-Peter

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 22:37:31 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      Re: OT Re: Encryption
Comments: To: bobv <bobv@SOS.NET>
In-Reply-To:  <38337BFE.17729325@sos.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

bobv wrote:
>Lately we've been discussing hp ecryption. Some time ago I saved a file
>with DES encryption (8 character passcode) and have since forgotten it.
>Has anyone seen anything that will crack the encryption and give upi the
>passcode?

After reading http://whatis.com/des.htm, I think you won't be able to
decode it without remembering the passcode.

Or, I found this at the RSA site:

"Most recently,  Distributed.Net, a worldwide coalition of computer
enthusiasts, worked with the Electronic Frontier Foundation's (EFF)
'Deep Crack,' a specially designed supercomputer, and a worldwide
network of nearly 100,000 PCs on the Internet, to win RSA Data
Security's DES Challenge III in a record-breaking 22 hours and 15
minutes, beating the previous record of 56 hours.
   http://www.rsasecurity.com/rsalabs/des3/index.html "

So, if you could interest the EFF in trying to break a record with
your file, you might could break it with a brute-force approach in
something shorter than your lifetime.

--
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 18 Nov 1999 22:40:20 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Another sign of Windows CE's eventual demise?

Hi All,

I found the following reference the other day and haven't had a chance to
check it out yet myself, but I sounds like it might be of interest to
this list's members:

---

Personal Technology: Evidence mounts of exodus from Windows CE

Three years after its debut, evidence is mounting that
Microsoft's efforts to spread the use of its Windows
CE operating system to gadgets is not faring well.
(November 16, 1:00 p.m. PT)
http://2.digital.cnet.com/cgi-bin2/flo?x=dghAmAhoowggYoud

---

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 08:19:24 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Brian.McIlvaine@UNBOUNDED.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Subject:      HP 100LX 32MB upgrade
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

There was someone who had this done a while ago, anyone remember who? I am
trying to buy a 1Mb HP 200LX for 32MB upgrade on ebay and finding it difficult
even to get 1MB versions for around $200 - which clearly was the price point
not long ago. I have an HP 100LX - any chance that it can be "PUMPED UP?"

Brian

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 08:19:30 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Brian.McIlvaine@UNBOUNDED.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Subject:      Magic
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Alright - I was experiencing something I thought couldn't happen, and then it
stopped all by itself - if that isn't magic what is?

Over the last two days, whenever I would plug in a PCMCIA card (Megahertz modem
and Viking ATA flash card) the HP would turn on by itself. I thought a PCMCIA
card had to have its own battery to cause the HPLX to "wake up."

Anyone else seen this?

Brian

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 08:19:33 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Brian.McIlvaine@UNBOUNDED.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Subject:      Free POP3 email server
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I have had good luck for about three months with "unbounded.com" for a free
POP3 email service. I think their lead in docs say you have to put up with a
weekly "digest" of ads - but I have yet to receive one.

I had my account at GeoCities (which I think Yahoo owns now) just evaporate -
their tech "service"" - their description, not mine {I would use a different
characterization} claims that ID never existed - I began to feel like Sandra
Bullock in ""The Net." {Truth in advertising here - I never reallly saw that
movie}

There is also a site that ranks the free email services - try a search on "free
email rating".

unbounded's URL is, unsurprisingly, www.unbounded.com

Usual disclaimer - don't work for them, just use their servers for free POP3
access!!

Brian

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:03:00 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Franklin Eekhout <franklin@ONLINE.NO>
Subject:      Re: Free POP3 email server

I use www.hotpop.com for some things... Works for me.

br

Franklin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 08:08:00 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      Re: 200LX for a journal
In-Reply-To:  <Pine.LNX.4.10.9911190305510.494-100000@hplx.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

David Sargeant wrote:

>On Thu, 18 Nov 1999, Russel Brooks wrote:
>
>> HPCRACK.ZIP exists on SUPER to brute force crack the HP encryption and
>> show that it isn't very strong.  If you want good encryption why not
>> store your db files on a SecureDevice encrypted drive?
>
>I don't think it's a brute force crack; doesn't "brute force" imply just
>testing passwords and letter/number combos until you find one that works?
>HPCRACK works by employing knowledge of the algorithm and method used to
>encrypt the files.

Actually, HPCRACK doesn't even need to know the algorithm. It scans
through the file looking for a record of type "1", which is the
password record. It then takes those 17 bytes and does a binary
exclusive-or with a 17-byte "secret" code that the author figured out,
and your password is revealed.

How that password is used to encode the rest of the data is not
necessary to know just to get the password out.

--
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 10:19:04 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      wince test message
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

testing the TOPICS filter...Thanks, AJKind

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 10:20:44 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      wince: Toipcs test #2
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thanks for your patience...AJK

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 10:23:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: wince: Toipcs test #2
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Last test! AJK

> Thanks for your patience...AJK
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 10:34:13 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      ADMIN: results of TOPICS filter test
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri, 19 Nov 1999 10:24:43 -0500 (EST)

Hi:

   Donald Collins asked about the TOPICS filter a few days ago and how
   it scaned the SUBJECT header. I just tested it (as yoall know ;-) )

   To filter properly, the colon ":" must follow the TOPIC ie "WINCE:"
   or "FLUFF:". The whole SUBJECT is scanned for that string, so
   "RE: WINCE:..." will be filtered.

   I am open to suggestions for other TOPIC filters besides FLUFF,
   WINCE & FS if you think they it would be helpful to reduce the
   "signal to noise" ratio...but they will onlywork if posters use
   them. I don't have time to moderate this LIST, and I don't want to
   put myself in the position of "bouncing" people because they don't
   adhere to SUBJECT prefixes.

   All comments are welcome, but to <mchem1@uconnvm.uconn.edu> please!

   Cheers...

*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 23:41:38 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "R.S." <rogerswn@CTIMAIL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "R.S." <rogerswn@CTIMAIL.COM>
Subject:      Re: HPLX Built-in phone appl
Comments: To: Mberri01@AOL.COM
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I believe that all the built in xDB programs only allow ONE 'category' field
per file.

R. S.
----- Original Message -----
From: Michael Berrier <Mberri01@AOL.COM>
To: <HPLX-L@UCONNVM.UCONN.EDU>
Sent: Friday, November 19, 1999 8:47 PM
Subject: HPLX Built-in phone appl


> Hi list,
>
> I'm struggling for a couple of days and can't get it done!!
>
> I'm unable to put a new categorie in my phone data base as soon as I press
> enter or F10 the input disappears and did not stay in the list.
> Does anybody have the right hint for me.
>
> Thanks in advance, Michael
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 07:50:25 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Erling, Marshall N" <Marshall.Erling@PSS.BOEING.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Erling, Marshall N" <Marshall.Erling@PSS.BOEING.COM>
Subject:      Free POP mail w/out ads. was: Post/LX & Hotmail
MIME-Version: 1.0
Content-Type: text/plain

For those of you looking for free POP email with Web access and without any annoying ads, try http://www.myrealbox.com

It's a 'beta site' and it's provided by Novell.
Despite being beta, I've been using it for some time, and have found it quite reliable.

 Marshall

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 17:17:57 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: filer backup

Nathalie Bugeaud writes:
> yes, it worked this time: "modified files only" takes less time than copying
> the whole 1.5mb of directory structure
>
> i only needed to update the files in directories  on A:\9 i had been working
> on during the last few days on C:\9 , which is 8 out of a total of 109 (in 5
> directories)

The problem that I have found with incremental backups is that they are additive
only. If you delete a file from your palmtop it is not deleted from your
backup, so the backup grows and grows in size....

What I have been working on over the last couple of weeks is a batch file which
will incrementally backup my palmtop in such a way that the backup is an IMAGE
of what is on my palmtop with no extraneous information. It seems to be working,
but I havent got all the bugs out yet. So far the longest part of the procedure
is doing "dir/s" on my 32Mb a: drive.

I am trying as much as possible to use standard tools especially on the palmtop
side. I am using Laplink to connect and xcopy to do the backing up as well as
some small apps to compare the directory listing.

Does anyone have other solutions to this problem, or should I "wrap up" my
solution and send it to SUPER. (Once I have goot the bugs out :)
One of the nice things is that I can run dbcheck on the desktop to check my
databases before including them in the full backup.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 17:34:34 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: Other DOS Version on HP 200 LX

Richard A. Smith / Patti Smith writes:
> What about when you hold down Alt while booting; it gives you boot
> options like "Boot from A:..."  Anyone willing to try that?
> I don't presently have an extra flash card to try it with, but I will
> soon and I'll try it with DOS 6.22.

The ROM bios and Dos have already started. This is giving you a choice from
where to read config.sys and autoexec.bat. It is NOT giving you a choice of
where to load a different operating system. However if minx can load from
a: drive there should be a way of loading a different OPERATING SYSTEM such
as DOS6 from a bootable PCMCIA card. How to do this I dont know...


======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 17:43:52 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: Post/LX & Hotmail

A Meshar writes:
> Possibly. Look at GRIC as one of the roamers.I believe Andreas
> had some experience with them... Anyone else?

My ISP here in Israel is Netvision and on a recent trip I signed up with their
global roaming which uses GRIC. It worked in Thailand but not in Australia.
When I wrote to Netvision and Telstra (the Australian ISP), they both said
"thanks for the information" but it was probably the other guy's problem.
Luckily I had another solution available at the time.

======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 07:22:59 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: HPLX Built-in phone appl
Comments: To: Mberri01@AOL.COM
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Database categories are limited to 32 categories, or 255 total characters(for
all categories), whichever comes first (LX manual section 8-2).

After you reach that limit and try to enter more, it behaves as you described.

Only choice is to delete or edit categories to make them shorter (I think).

- Longden





Michael Berrier <Mberri01@AOL.COM> on 11/19/99 03:47:27 AM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to Mberri01@AOL.COM

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  HPLX Built-in phone appl





I'm unable to put a new categorie in my phone data base as soon as I press
enter or F10 the input disappears and did not stay in the list.
Does anybody have the right hint for me.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 07:30:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Other DOS Version on HP 200 LX
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>>>Has anybody ever tried to run another Version of Dos
>>>or f.ex. FreeDos on the HP?

>I have loaded several DRDOS files like xcopy.exe
>on my HP95. They run fine under the DOS 5.0 command.com
>and offer /options not found with the DOS 5.0
>versions of the same.


True, you can load some DOS utilities from other DOS versions, but this is not
      the same as running another version of DOS.

For example, I can run some DOS 6.22 programs on my 200LX (even a Win95 version
of Scandisk), but I can't use the menu based alternate boot configurations that
DOS 6.22 provides because they are at a lower level and affect how config.sys is
read/interpreted.



BTW, I thought the HP95 ran DOS 3.0, not 5.0.



- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:59:31 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Replying to the Digest
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> > do you recall the shareware program's name?  On super?
>
> It used to be on the D&A site. I don't remember the name.

I think you're speaking about LXDR (LX Digest Reader).

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:59:38 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: FS: PCMCIA Adapter by SCM Micro: SwapBox Classic SBI-D2P
Comments: To: Fryday <fryday@CALIFORNIA.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Philippe,

> Tried it, didn't work with the obscure PCMCIA card I wanted to use, now I have a
> motherboard with PCI slots only (the adapter takes ISA), so I can't use it
> anymore. Simple to install, simple to use. Perfect for all those flashcards and
> modems!

Is the slot accesable from the front or the back of the desktop?
Is there a linux driver for this device?

I'm searching for a possibility to access my CF card under linux!

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:59:45 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Can't get HV to show sites
Comments: To: Russel Brooks <rlbrooks@POBOX.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Russ,

> Ok, what am I doing wrong (this time)?

I had exactly the eame problem a few months ago, I think.
HV showed only a c:\000MIME.HTM or something like that in the first line
of the screen (the black line above the HTML window!).
And it didn't download any page.

I reinstalled the whole www/lx package and altered only the most
necessary items in the hv.cfg.
Then it worked again.

I don't know what the problem was, maybe a path in the hv.cfg was
wrong.
Make sure that all directories specified there exist!

And maybe comment out the proxy entry in the www.cfg. I had problems
with this before. (Now it works also with the proxy entry a- don't know
why!)

Good luck!

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 11:02:50 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jon Barrett <jonzann@ALTAVISTA.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jon Barrett <jonzann@ALTAVISTA.NET>
Subject:      Re: Fwd: hp omnibook 300
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> Date:    Thu, 18 Nov 1999 16:20:58 -0600
> From:    Jeff Johns <jeffj@SCOTT.NET>
> Subject: Fwd: hp omnibook 300
>
> --- begin of forwarded message ---
>
> From: "Anna Carolyn Osborn" <acosborn@wireco.net>
> To: "Jeff Johns" <jeffj@scott.net>
> Subject: hp omnibook 300
> Date: Thu, 18 Nov 1999 22:15:08 -0000
>
> Hello Jeff, do you happen to know where I could look for a manual for
a =
> HP
> omnibook 300? I tried HP but couldn't find any info.  THANKS IN
ADVANCE =
> 73,
> Anna Osborn      ws4z@amsat.org
>
> --- end of forwarded message ---
>
> Does anyone have an extra book they can help my friend with?
>
> Jeff
>
>            ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
>            ---    Jefferson County Sheriff's Department    ---
>            ---           Birmingham, Alabama USA           ---
>            ---  Finger jeffj@scott.net for my PGP RSA Key  ---
>

Don't recall much Omnibook 300-specific content in the manuals. WinWord
2, Excel (4?), HPPhone same as on the 200, Appts same as on the 200.
Only really non-obvious thing is the function keys are defined by
popping links into an "F1-F12" program group, aside from the internal
diagnostics. Most everything HP software or hardware oriented will be
in virtually any series 1 (300-425 - ROM-based apps) or series 2
(430-530 - RAM-based apps) manual. Also the on-line help. She can join
the Omnibook mailing list. From Charlie's site:  ". I would also
reccommend that you subscribe to the Omnibook Mailing List. Send an
email to listproc@elektro.cmhnet.org In the body of the email, put just
this "subscribe omnibook Your Name" ... of course without the quote
marks and with your own name! After you are subscribed, the email
address to send your questions to is omnibook@elektro.cmhnet.org Again,
if you find an answer, please take the time to mail me and help others
who may have the same question. "

Jon

Jon Barrett
Kensington, MD jonzann@altavista.net

Prepared on the last great HP portable - Omnibook 800
 (new products notwithstanding - bring back the Paw)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 09:57:15 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Keefe <emkeefe@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Keefe <emkeefe@USWEST.NET>
Subject:      Re: HPLX Built-in phone appl
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

If you're trying to add a category field to Phonebook, be aware that the
limit is one category field per database (includes phonebook).
If you're trying to add a new item to a category, you may have reached the
limit of 256 characters total for all category fields. Shorten the names of
the category fields. I recall that there is a limit of 16 category fields as
well. Alternatively you could add a group of check boxes and put them on a
second page if necessary. To modify the phone book database, it must be
opened in the database app. You don't need to change the name, just open it
with the .PDB extension in database.

.ed.PTP

Let's see if this comes up on the list as plain text. It doesn't look like
it on my Outlook Express screen even though the Plain Text option is chosen.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 07:49:02 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: Other DOS Version on HP 200 LX
Comments: To: "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

I think most of us have tried that before but got nowhere.

The problem is that DOS isn't initially loaded with config.sys and autoexec.bat.
Those files are actually the end part of the boot processing. The initial
loading of DOS is done in ROM, where we don't have an option.  The ROM based DOS
5.0 kernel is started first and because of that, many DOS 6.x features will
subsequently not be recognized.

Think of it as having a boot disk for an ordinary DOS PC.  If you just copy the
autoexec.bat and config.sys files to a diskette, you won't be able to boot from
it.  The correct thing to do is to format the diskette with the /s option which
copies IO.SYS and MSDOS.SYS to the diskette and creates a boot record (a small
program on the front sector used to load the system).  These files are analogous
to what's in ROM...and what we can't change.

My guess is that during a boot, the equivalent of the boot record in the LX
(which is in ROM) then needs to get the IO.SYS and MSDOS.SYS files for the next
part of the boot sequence.  On a diskette, the boot record looks for those files
on the disk ... on the LX it's likely hard-coded to just look in the ROM for
those files, and hence the main part of the kernel gets loaded without any
opportunity to intervene.  I think all that happens before you see the boot
options menu on the LX, which at that point merely lets you control the final
parts of the boot.

However, if you find otherwise please let us know.

- Longden





"Richard A. Smith / Patti Smith" <rsmith@ENOL.COM> on 11/18/99 10:01:20 PM

Please respond to HPLX Mailing List <HPLX-L@UCONNVM.UConn.Edu>; Please respond
      to "Richard A. Smith / Patti Smith" <rsmith@ENOL.COM>

To:   HPLX-L@UCONNVM.UConn.Edu
cc:    (bcc: Longden Loo/AGH/Candle)
Subject:  Re: Other DOS Version on HP 200 LX




What about when you hold down Alt while booting; it gives you boot
options like "Boot from A:..."  Anyone willing to try that?
I don't presently have an extra flash card to try it with, but I will
soon and I'll try it with DOS 6.22.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 10:30:22 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: Other DOS Version on HP 200 LX
In-Reply-To:  <8825682E.00593079.00@n-smtpmta.candle.com> from "Longden Loo" at
              Nov 19, 99 07:49:02 am
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> These files are analogous to what's in ROM...and what we can't change.

Well, one can change it with soldering tools, but that's pretty
permanent.  Has anyone looked into yet another upgrade option for
replacing the ROM with a FLASH chip?  I don't know the mechanical
arrangement of the internal ROM on my HP, but the FLASH-ROM chips
are getting pretty small.

-Chris Lott

--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 11:08:42 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "James P. Grenert" <grenert.james@MAYO.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "James P. Grenert" <grenert.james@MAYO.EDU>
Organization: Mayo Medical School
Subject:      Re: Free POP3 email server
Comments: To: Brian McIlvaine <Brian.McIlvaine@unbounded.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Hi.
Forgive my ignorance, please.  Of what benefit is a free POP3 email server
to an LX user?  I am assuming these free email providers do not have
dialup numbers, so you must first access the Internet via your usual ISP,
right?  If you have an ISP, then you certainly must have email already!

What am I missing here?
J. P. Grenert
grenert@mayo.edu

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 12:25:53 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Subject:      Re: Free POP3 email server
Comments: To: "James P. Grenert" <grenert.james@mayo.edu>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I dial in using my wife ISP account - I don't have a personal ISP account,
so this gives me a seperate email account. I am sure there are plenty of
other possibilities as well.

Brian
-----Original Message-----
Subject: Re: Free POP3 email server


>Hi.
>Forgive my ignorance, please.  Of what benefit is a free POP3 email server
<snip>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 12:40:37 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Brian McIlvaine <Brian.McIlvaine@UNBOUNDED.COM>
Subject:      Re: Free POP3 email server
Comments: To: "James P. Grenert" <grenert.james@mayo.edu>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I dial in using my wife ISP account - I don't have a personal ISP account,
so this gives me a seperate email account. Also, if I change ISPs, I don't
have to change my email address. I am sure there are plenty of other
possibilities as well.

Brian
-----Original Message-----
Subject: Re: Free POP3 email server


>Hi.
>Forgive my ignorance, please.  Of what benefit is a free POP3 email server
<snip>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 12:49:09 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: SysMgr and AppMgr
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Longden Loo wrote:

"TSR is a Terminate and Stay Resident program, whose technical
iOS 2?).  TSRs are executed, and rather than completing and
returning things
back to the way they were, leave something of itself in memory,
usually to
continue performing a service of some sort."

OK,do I understand this right if I say that the TSR(the system manager)=
 is a little program of its own in which the application manger is?And=
 that should then be the reason to why the application manager is launched=
 automatically when typing 200?I.e. runs the system manager.

That should then also be the reason to way the application manager can't=
 work without the system manager as it is not a program of itself but=
 only a part of another program(=3Dthe system manager)

(hope you are patient :-) )

Lars Hedstrom/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 18:57:11 +0100
Reply-To:     Paulo.Custodio@alcatel.de
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@ALCATEL.DE>
Organization: Alcatel
Subject:      Re: filer backup
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> The problem that I have found with incremental backups is that they are additive
> only. If you delete a file from your palmtop it is not deleted from your
> backup, so the backup grows and grows in size....

I use syndir for my incremental backups: it updates a copy on the flash
card of the C: disk, removing files that were removed in the source.

My backup script is:
        syncdr16 c:\ a:\_bak_c_ /a/u/dd/f/r/v

syncdir is public domain, and can be fetched from
http://people.delphi.com/rrutt/syncdir.htm

Is there a home for it at SUPER too?

Paulo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 10:23:11 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: SysMgr and AppMgr
Comments: To: Lars Hedstroem <nxw988e@TNINET.SE>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>>
Longden Loo wrote:
>>>
TSR is a Terminate and Stay Resident program, whose technical spec was
introduced by MS back when the PRINT command came out (the first such TSR ...
DOS 2?).  TSRs are executed, and rather than completing and returning things
back to the way they were, leave something of itself in memory, usually to
continue performing a service of some sort.
<<<

OK,do I understand this right if I say that the TSR(the system manager) is a
little program of its own in which the application manger is?And that should
then be the reason to why the application manager is launched automatically when
typing 200?I.e. runs the system manager.

That should then also be the reason to way the application manager can't work
without the system manager as it is not a program of itself but only a part of
another program(=the system manager)
<<

I had to paste my original remarks in the above because your emailer (or mine)
somehow chopped it up...some of your remarks may have been maligned also.

I looked over some of the earlier remarks on this thread, and I know Peniel has
described SysMgr as a TSR, but I'm not sure this is entirely accurate.  A true
TSR returns control to DOS, while trapping an event interrupt (such as a
hot-key) in order to know when to re-activate itself.  However, when you type
200 and start SysMgr/AppMgr, at no time do you return control back to DOS.
Subsequent DOS access thru SysMgr/AppMgr (such as Filer/Ctrl-123) merely creates
a DOS subshell, and is not a true return of control.  When you exit
(More/Menu/Application/TerminateAll) to DOS, no trace of SysMgr remains.

However, the exact definition of TSR doesn't appear essential to answering your
question.

SysMgr is similar to AppMgr in acting as a supervisor program.  Just as AppMgr
handles application starts/stops, SysMgr handles AppMgr start/stop and also
various low-level activities such as handling of the serial ports and polling
the running tasks continuously.


All "native" LX programs are in exm format (this includes AppMgr), which are
managed by SysMgr, so no exm programs can run without running SysMgr first...so
in a sense you are correct that "AppMgr is not a program of itself" since it
requires SysMgr to load and manage it.  The relationship is similar to
SysMgr=DOS, and AppMgr (or X-Finder)=Windows.



- Longden



PS. I'm not an LX developer, so someone who knows more about the LX on that
level may want to correct me if I'm wrong.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 14:34:07 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Mberri01@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Michael Berrier <Mberri01@AOL.COM>
Subject:      Fwd: HPLX Built-in phone appl
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="part1_0.4d3e028f.2567002f_boundary"

--part1_0.4d3e028f.2567002f_boundary
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Hi guys,

many thanks to those who answered promptly to my question I posed . I was
able to fixes it.

all the best, Michael






In a message dated 11/19/99 6:47:27 AM Eastern Standard Time, Mberri01 writes:

<<  HPLX-L@UCONNVM.UCONN.EDU >>


--part1_0.4d3e028f.2567002f_boundary
Content-Type: message/rfc822
Content-Disposition: inline

Return-path: Mberri01@aol.com
From: Mberri01@aol.com
Full-name: Mberri01
Message-ID: <0.c6cad8a8.256692cf@aol.com>
Date: Fri, 19 Nov 1999 06:47:27 EST
Subject: HPLX Built-in phone appl
To: HPLX-L@UCONNVM.UCONN.EDU
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-Mailer: AOL 4.0 for Windows 95 sub 38

Hi list,

I'm struggling for a couple of days and can't get it done!!

I'm unable to put a new categorie in my phone data base as soon as I press
enter or F10 the input disappears and did not stay in the list.
Does anybody have the right hint for me.

Thanks in advance, Michael

--part1_0.4d3e028f.2567002f_boundary--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:03:25 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      X-finder viewer
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I cant seem to get quickv.exm to work as my viewer. The programme will
start, but it will not open the object filename. I have ried several hings
but it just dont go.

Anyone have quickv as their viewer. Any suggestions for a viewer to use, I
need it to be as small as possible.

Thanks, Darren.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 13:15:51 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: X-finder viewer
Comments: To: Darren Frick <dfrick@SNIP.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri, 19 Nov 1999 15:20:20 -0500 (EST)

19m33s ago ...
On Fri, 19 Nov 1999, Darren Frick wrote:

> Anyone have quickv as their viewer. Any suggestions for a viewer to =
use, I
> need it to be as small as possible.

Hi Darren -

Actually, I'm using Buerg's List for the main viewer, and QV as an
alternate.  To use it as the main viewer try this line in the Viewer
section of finder.env

%v   ,       ,$c %p%c; $m {x7b00}{Paste} #Quick View

I use Alt4 for the QV hotkey, so if you use something else, you'll need
to change {x7b00} to {xnnnn} with nnnn being the keycode for your
hotkey.


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 14:40:45 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Dan Ridenhour <driden@STLNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Dan Ridenhour <driden@STLNET.COM>
Subject:      Anyone use a HP + WWW/LX + TELNET/LX on SprintPCS's new wireless
              data services.
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

All,

Im looking at the new wireless web services offered by SprintPCS and it
seems that a number of their phones (including the Qualcomm 1960/2760 which
are $99/$129) are full 14.4 data/fax modems that use an AT command set, etc.
So im curious if anyone has experimented with using one of this service with
a data cable connected to an HP 100/200lx via serial cable for net access.

Im looking for a wireless telnet solution for accessing routers. :)  and
this seems pretty slick as it gives wireless 14.4 access for $9.99 a month
(in addition to your normal SprintPCS phone service).

Thanks,

Dan
driden@stlnet.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:33:45 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: Nokia 9110 Communicator/will HP200LX run GEOS?

Hi Stephan,

>Think about the HP OmniGo 700 LX too. It is 98% 200LX-compatible
>(there is a little difference with the chips, the EMS-emulation doesn't
>work on the 700LX). It has a mobile phone dock for the Nokia 2110
>and 2110i. A compatible Philips phone plugs in too. The GSM card
>is already in the machine. You plug your phone in and connect to the
>internet. WWW/LX works. ccLXPOP works too. Fax and SMS of course.
>The screen is very very little smaller than the 200LX. The keyboard is
>the same. It seems, that this one is the LX-version of the communicator.
>Some of my colleagues thought it IS the communicator.

Ouch!  Please don't rub it in! ;-)

I have thought a great deal about the HP OmniGo 700 LX.  On the surface,
It sounds like the perfect solution.  I don't use the EMS emulation on my
HP200LX anyway, but it pains me deeply to say that using a OmniGo 700LX
isn't even an option for someone in the U.S. :'(

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:57:34 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: Magic

Hi Brian,

>Alright - I was experiencing something I thought couldn't happen, and
then it
>stopped all by itself - if that isn't magic what is?
>
>Over the last two days, whenever I would plug in a PCMCIA card
(Megahertz modem
>and Viking ATA flash card) the HP would turn on by itself. I thought a
PCMCIA
>card had to have its own battery to cause the HPLX to "wake up."
>
>Anyone else seen this?

I've seen something similar to what you describe, only it relates to the
serial port.  The HP200LX will turn itself on if it detects a signal
change at it's serial port.  I make good use of this "feature".  If I
leave my serially connected HP200LX network node turned off at night, it
will turn itself on automatically when my automatic backup processes
access it via it's serial port, thus always allowing it's drives to be
backed up. :-)

Could it be that your flash card was introducing a tiny, but significant
enough static charge to your palmtop's slot to trigger that automatic
response in your HP200LX?

I don't know if the HP200LX's PCMCIA slot reacts in the same way as it's
serial port or not.  Hopefully one of the hardware engineers on this list
will answer this question.

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 13:21:45 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Anyone use a HP + WWW/LX + TELNET/LX on SprintPCS's new
              wireless data services.
In-Reply-To:  <003b01bf32ce$5b026a80$8494a8c0@dan-dell.pulitzer.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 19 Nov 1999, Dan Ridenhour wrote:

> Im looking at the new wireless web services offered by SprintPCS and
> it seems that a number of their phones (including the Qualcomm
> 1960/2760 which are $99/$129) are full 14.4 data/fax modems that use
> an AT command set, etc. So im curious if anyone has experimented with
> using one of this service with a data cable connected to an HP
> 100/200lx via serial cable for net access.

Is this unlimited access?  Where can we find more info (web page or
something)?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 13:08:30 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      Re: Anyone use a HP + WWW/LX + TELNET/LX on SprintPCS's new
              wireless             data services.
Comments: To: Dan Ridenhour <driden@STLNET.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Doesn't the 9.99$ only includes a certain number of minutes to be connected on
the internet?

Philippe

----- Original Message -----
From: Dan Ridenhour <driden@STLNET.COM>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Friday, November 19, 1999 12:40 PM
Subject: Anyone use a HP + WWW/LX + TELNET/LX on SprintPCS's new wireless data
services.


> All,
>
> Im looking at the new wireless web services offered by SprintPCS and it
> seems that a number of their phones (including the Qualcomm 1960/2760 which
> are $99/$129) are full 14.4 data/fax modems that use an AT command set, etc.
> So im curious if anyone has experimented with using one of this service with
> a data cable connected to an HP 100/200lx via serial cable for net access.
>
> Im looking for a wireless telnet solution for accessing routers. :)  and
> this seems pretty slick as it gives wireless 14.4 access for $9.99 a month
> (in addition to your normal SprintPCS phone service).
>
> Thanks,
>
> Dan
> driden@stlnet.com
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 13:29:18 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Nokia 9110 Communicator/will HP200LX run GEOS?
In-Reply-To:  <19991119.160118.21934.3.j_vanderstel@juno.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 19 Nov 1999, John J Vanderstel wrote:

> I have thought a great deal about the HP OmniGo 700 LX.  On the
> surface, It sounds like the perfect solution.  I don't use the EMS
> emulation on my HP200LX anyway, but it pains me deeply to say that
> using a OmniGo 700LX isn't even an option for someone in the U.S. :'(

Sure it is.  Bill Childers used one for a month.  I'm getting one this
week and plan to use it quite a bit.  You have to have the Nokia 2190
phone (which I, by lucky coincidence, have) or something identical, and
your provider has to support it and the US version of GSM (which I think
is 1900MHz?  I may be wrong...), but then it works fine.  Unfortunately
most providers charge extra for data calls... on my plan I pay $49.95 a
month for 1500 minutes of voice, and an extra $4.95/month or the
PCSDataConnect option that allows data connections.  But then they charge
an additional $0.15/minute for any data calls!  Talk about highway
robbery.  Or rather, airwave robbery.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:14:12 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Dan Ridenhour <driden@STLNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Dan Ridenhour <driden@STLNET.COM>
Subject:      Re: Anyone use a HP + WWW/LX + TELNET/LX on SprintPCS's new
              wireless data services.
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

-----Original Message-----
From: David Sargeant <david@HPLX.NET>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Friday, November 19, 1999 3:10 PM
Subject: Re: Anyone use a HP + WWW/LX + TELNET/LX on SprintPCS's new
wireless data services.


>On Fri, 19 Nov 1999, Dan Ridenhour wrote:
>
>> Im looking at the new wireless web services offered by SprintPCS and
>> it seems that a number of their phones (including the Qualcomm
>> 1960/2760 which are $99/$129) are full 14.4 data/fax modems that use
>> an AT command set, etc. So im curious if anyone has experimented with
>> using one of this service with a data cable connected to an HP
>> 100/200lx via serial cable for net access.
>
>Is this unlimited access?  Where can we find more info (web page or
>something)?

Unfortunately nothing wireless is unlimited,  the $9.99 plan gives you 50
minutes
and 50 web updates (pushed data from sites to your phone).  If you want
additional
time you can stack up to 3 of the $9.99 plans on your account or just pay as
you
go at .39 a min extra time.

Also, there are 3 services included... Wireless web (allows on phone
browsing of
selected sites (not HTML a different markup language).  the web updates
(push),
and wireless data (using the phone as a 14.4 modem).  From what ive gathered
talking with various techs etc... the straight use of the phone as a modem
goes
against your normal talk time so for example their 50/500 holiday special
would
give you 500 minutes of connect time for $50 a month, which isnt that bad.

www.sprintpcs.com has more details im sure.

Dan
driden@stlnet.com


>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 13:46:17 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Anyone use a HP + WWW/LX + TELNET/LX on SprintPCS's
In-Reply-To:  <008701bf32d3$18492bc0$8494a8c0@dan-dell.pulitzer.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 19 Nov 1999, Dan Ridenhour wrote:

> Unfortunately nothing wireless is unlimited

Not so; Go America gives you unlimited web and e-mail for $59.95 a month.
Too bad it can't be used with the 200LX.  But Mack Baggette has a nice
little pager-sized device that can e-mail and web browse.  It's very cool.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 14:27:21 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: SysMgr and AppMgr
Comments: To: Longden_Loo@CANDLE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri, 19 Nov 1999 16:31:36 -0500 (EST)

02h49m09s ago ...
On Fri, 19 Nov 1999, Longden Loo wrote:

> I looked over some of the earlier remarks on this thread, and I know
> Peniel has described SysMgr as a TSR, but I'm not sure this is entirely
> accurate.  A true TSR returns control to DOS, while trapping an event
> interrupt (such as a hot-key) in order to know when to re-activate =
itself.

Hi Longden -

After looking over the sequence in autoexec.bat I think you're right.
SysMgr is a supervisory program, not a TSR.


Later

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 13:52:40 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: SysMgr and AppMgr
In-Reply-To:  <199911191927.OAA17157@moon.web2000.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 19 Nov 1999, Peniel Romanelli wrote:

> After looking over the sequence in autoexec.bat I think you're right.
> SysMgr is a supervisory program, not a TSR.

Think of it as Windows 3.1, sort of an "application environment."
Then all the other programs (like Application Manager) run under that
environment.  Like the File Manager did in Win31.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:32:49 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Dan Ridenhour <driden@STLNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Dan Ridenhour <driden@STLNET.COM>
Subject:      Re: Anyone use a HP + WWW/LX + TELNET/LX on SprintPCS's
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

-----Original Message-----
From: David Sargeant <david@HPLX.NET>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Friday, November 19, 1999 3:35 PM
Subject: Re: Anyone use a HP + WWW/LX + TELNET/LX on SprintPCS's


>On Fri, 19 Nov 1999, Dan Ridenhour wrote:
>
>> Unfortunately nothing wireless is unlimited
>
>Not so; Go America gives you unlimited web and e-mail for $59.95 a month.
>Too bad it can't be used with the 200LX.  But Mack Baggette has a nice
>little pager-sized device that can e-mail and web browse.  It's very cool.

Yea my problem is i need a telnet client which leaves out a number of the
wireless
options and makes the Palm VII a paperweight :).  I use both HPs and a Palm
V
which both have serial ports and since the phone acts as the modem theres no
heavy draw on the devices power due to a PC card.   Ive seen it work on
Palms
and Win9x machines but havent heard of it used with an HP... which of course
prompted my original post. :)

Also $59 a month is a bit high for my liking... I can do one of the
following with
sprint.

$29.95 + 9.95 for 120 min of phone time, and 50 web min/updates. (0.39 an
extra min)
$16.95 for 30 min of talk time ($0.39 a min for internet access)

The $39.90 (total) will probably suit my needs... and I get PCS phone
service and the
ability to browse pages like mapquest for directions on the phone which
could be handy.
but will it work. always the question. :)

Dan
driden@stlnet.com



>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:18:07 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Don Puscher <dpuscher@QUALCOMM.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Don Puscher <dpuscher@QUALCOMM.COM>
Subject:      Pocket Launcher and DOS
Mime-Version: 1.0
Content-Type: multipart/alternative; types="text/plain,text/html";
              boundary="=====================_349362686==_.ALT"

--=====================_349362686==_.ALT
Content-Type: text/plain; charset="us-ascii"

I've been using 200Mnu Y.A.P.A.L. (Yet Another Palmtop Application
Launcher) to
launch commonly used programs. It works real well for DOS programs but takes a
little more work to get it to launch EXMs. So I thought I'd try Pocket
Launcher.

Pocket Launcher seems like a really great program but I can't get it to start
some of my DOS programs correctly. For example, when I try to launch SHASS it
will start the program but doesn't see the inventory file. In 200Mnu the
command line is

&Shass=a:\bin\shass\shass.exe # a:\bin\shass

The first part tells it to start the program, the second where it should look
for data files (# is a field divider).

I can't figure out the syntax to do this in Pocket Launcher. The examples
don't
address EXE files directly. Looks like the sample works with LZH (and
X-Finder?). It seems like it should be something like

Shass           0,g a:\bin\shass a:\bin\shass\shass.exe

Where 0 gives it all available memory, g does ???, then the path, then the
executable.

But this doesn't seem to work. The screen flashes a couple of times and then
I'm back where I started.

Can anyone lend a hand?

TIA


****************************************************************
Don Puscher                                dpuscher@qualcomm.com
"The machine will be his weapon, his work bench and his lectern."
                                         -- Nicholas Negroponte
--=====================_349362686==_.ALT
Content-Type: text/html; charset="us-ascii"

<html>
I've been using <font size=2>200Mnu Y.A.P.A.L. (Yet Another Palmtop
Application Launcher) to launch commonly used programs. It works real
well for DOS programs but takes a little more work to get it to launch
EXMs. So I thought I'd try Pocket Launcher.<br>
<br>
Pocket Launcher seems like a really great program but I can't get it to
start some of my DOS programs correctly. For example, when I try to
launch SHASS it will start the program but doesn't see the inventory
file. In 200Mnu the command line is<br>
<br>
&amp;Shass=a:\bin\shass\shass.exe # a:\bin\shass<br>
<br>
The first part tells it to start the program, the second where it should
look for data files (# is a field divider).<br>
<br>
I can't figure out the syntax to do this in Pocket Launcher. The examples
don't address EXE files directly. Looks like the sample works with LZH
(and X-Finder?). It seems like it should be something like<br>
<br>
</font><font size=3>Shass&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;0,g
a:\bin\shass a:\bin\shass\shass.exe<br>
<br>
Where 0 gives it all available memory, g does ???, then the path, then
the executable.<br>
<br>
But this doesn't seem to work. The screen flashes a couple of times and
then I'm back where I started.<br>
<br>
Can anyone lend a hand?<br>
<br>
</font><font size=2>TIA<br>
<br>
</font><br>
<div>****************************************************************</div>
<div>Don
Puscher&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
dpuscher@qualcomm.com</div>
<div>&quot;The machine will be his weapon, his work bench and his
lectern.&quot;</div>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-- Nicholas Negroponte
</html>

--=====================_349362686==_.ALT--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 23:13:02 -0000
Reply-To:     Mike@ampersoft.co.uk
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Little <Mike@AMPERSOFT.CO.UK>
Organization: Ampersoft
Subject:      Re: Nokia 9110 Communicator/will HP200LX run GEOS?
In-Reply-To:  <02a401bf326e$0283d9d0$0101a8c0@fex>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

On 19 Nov 99, at 10:11, Franklin Eekhout wrote:

>> 1. Can anyone verify that it can actually run a small DOS program?
>
>Haven't tried to, and now that my friend's one is stolen...

No, there are not enough dos services (all the stuff on INT21) or BIOS services to
even get started.
There is also no command shell.

However,  there is a special key sequence you can hold down when booting the device
(which think may trash your data) that does not boot the GUI. But instead puts you in
a state whereby you can do tethered debugging (debugging from a PC over a serial
port).

Once in that state, you can then run the GUI (and it's applications) under the
debugger.

This leads me to believe that, if you REALLY knew what you were doing, you could
choose to run some other x86 code, but again not DOS programs. And not too practical
either!

>> 2. Does it have a small keyboard?
>
>Yes, but the buttons are softer. I would rather type text on the 9110 than
>the LX. I think.
>
>> 3. How much memory does it have?
>
>2 MB... My friend had a 500 kB .wav file that triggered every time he got an
>SMS. :-)

From the Geoworks website:
Memory
        8 MB total
        4 MB OS and applications
        2 MB program execution
        2 MB user data storage

>> 4. Does it surf the web?
>
>Yep! And email. and fax. We used it on Yahoo and Alta Vista too.
>
>> with the Nokia 9110, then some DOS programs might be able to be run on
>> the Nokia 9110. If so, that would hold some interest for me.

No, see above.


Mike

--
Mike Little <mike@ampersoft.co.uk>
work: <m.little@servicepower.com>
Web: http://www.ampersoft.co.uk
PGP public key at http://www.ampersoft.co.uk/mike/mike.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:14:53 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: X-finder viewer
Comments: To: Darren Frick <dfrick@SNIP.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Fri, 19 Nov 1999 15:03:25 -0500, Darren Frick <dfrick@SNIP.NET> wrote:

> I cant seem to get quickv.exm to work as my viewer. The programme will
> start, but it will not open the object filename. I have ried several =
hings
> but it just dont go.
>
> Anyone have quickv as their viewer. Any suggestions for a viewer to =
use, I
> need it to be as small as possible.

Hi All,

I use QuickView as my main viewer and below you'll find the needed for
your finder.env.


#Viewer setting (lex, le, vvc, miel, view, pn200, list etc)
%v ,0 ,u||$c %p%c; $m {x2ff5}{Paste}{xd000}                 #QuickView
#%v ,/" ,$v                                                 #XF Viewer


Let me know how things work out.



Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 23:16:23 -0000
Reply-To:     Mike@ampersoft.co.uk
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Little <Mike@AMPERSOFT.CO.UK>
Organization: Ampersoft
Subject:      Re: FLUFF: Re: Nokia 9110 Communicator
In-Reply-To:  <Pine.LNX.4.10.9911181449080.29543-100000@hplx.net>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

On 18 Nov 99, at 14:50, David Sargeant wrote:

>On Thu, 18 Nov 1999, Mike Little wrote:
>
>> Anyway, waaaay off topic now!
>
>I don't think so.  Anything dealing with GEOS and the like, and the future
>of true palmtop computing, should be of interest to DOS LX users.
>

OK, I concede that with the Morphy One on it's way, then GEOS could become much more
viable. And thus more interesting and relevant for us.

However, the desktop GEOS is a completely different beast from the OS of the same
name on the 9000/9110.

Mike

--
Mike Little <mike@ampersoft.co.uk>
work: <m.little@servicepower.com>
Web: http://www.ampersoft.co.uk
PGP public key at http://www.ampersoft.co.uk/mike/mike.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 15:44:04 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      NewDeal / GEOS (was Re: Nokia 9110)
In-Reply-To:  <E11oxGh-000F0J-0B@finch-post-11.mail.demon.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 19 Nov 1999, Mike Little wrote:

> However, the desktop GEOS is a completely different beast from the OS
> of the same name on the 9000/9110.

True.  For the Morphy One and relatives, the NewDeal software would
probably be what we'd want to deal with.  Or even more likely for me,
Linux.

Which brings up a good point: will the Morphy One, or enhanced 200LX
machines in general, be considered appropriate for this same mailing list?
My gut feeling is that the Morphy One, being completely separate, won't
be, but something like a 200LX with a Pentium CPU upgrade (just a fantasy,
folks; it doesn't exist) would be.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 23:38:14 -0000
Reply-To:     Mike@ampersoft.co.uk
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Little <Mike@AMPERSOFT.CO.UK>
Organization: Ampersoft
Subject:      Re: Nokia 9110 Communicator/will HP200LX run GEOS?
In-Reply-To:  <001301bf328b$c7bc1ba0$f5ac0ecb@pavilion>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

On 19 Nov 99, at 20:44, Eng. & Industrial Projects wrote:

>> I have the original GEOS disks somewhere that I got with a 286 laptop
>> computer many years ago. I wonder if it would be worth my while to start
>> looking for them. Could the HP200LX possibly run an early version of
>> GEOS? Cheers!> John Vander Stel
>
>It ran only passible on a 286 on even a doublespeed LX I think you
>would find it painfully slow.

On the contrary, Geoworks and GEOS 'coulda been a contender'.
There is a review on the internal Geoworks site (to which I no longer have access),
from a Computer show in the US, where Geoworks debut-ed GEOS and
Microsoft debut-ed Win/386 (so we're talking about 1990?) and everyone (including MS
employees) was knocked out by the GEOS system. Not only was it faster and slicker,
but the GEOS demo machines were 2MB 286's and the Win/386 machines were 4MB 386's.

Unfortunately, Microsoft had more money and marketing muscle even then, and Geoworks
put their eggs in a couple of wrong baskets, the rest is history!


Some more info:
This page http://www.geocities.com/CapeCanaveral/Hangar/9020/index.htm
states "... NewDeal Office, an OS / GUI / office suite from NewDeal Inc. that can run
on PC's as simple as a 286, 640KB RAM, CGA display, and 9MB hard disk space."

From the same guy:
http://www.geocities.com/CapeCanaveral/Hangar/9020/geos/history.htm
This page is very interesting (and accurate).


For more info about the Communicator try
http://www.communicator.org/links.htm


Mike

--
Mike Little <mike@ampersoft.co.uk>
work: <m.little@servicepower.com>
Web: http://www.ampersoft.co.uk
PGP public key at http://www.ampersoft.co.uk/mike/mike.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 17:38:18 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Dan Ridenhour <driden@STLNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Dan Ridenhour <driden@STLNET.COM>
Subject:      Re: Nokia 9110 Communicator/will HP200LX run GEOS?
Comments: To: Mike@ampersoft.co.uk
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

-----Original Message-----
From: Mike Little <Mike@ampersoft.co.uk>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Friday, November 19, 1999 5:39 PM
Subject: Re: Nokia 9110 Communicator/will HP200LX run GEOS?


On 19 Nov 99, at 20:44, Eng. & Industrial Projects wrote:

<snip>

>Unfortunately, Microsoft had more money and marketing muscle even then, and
Geoworks
>put their eggs in a couple of wrong baskets, the rest is history!

There was another factor as well, the GEOS system had limited development
tools available and development was more difficult than for the Win16
environment.

GEOS has a long history going all the way back to its roots as a
Multitasking OS for 64k 6510/6502 series CPUs then later for the PC.
Another obscure note is that the PC version of GEOS iirc was originally
bankrolled by IBM which wanted to use it as the kernel of an OS/2 release
but M$ didnt like that idea too much, so it got shelved then later released
independently by Geoworks.

The C64, Apple, Nokia 9000, tandy Zoomer, HP Omnigo, PC all had Geos as
their OS or as an available option, and new deal office is still a good way
to get a older machine on the internet.

Dan
driden@stlnet.com






Some more info:
This page http://www.geocities.com/CapeCanaveral/Hangar/9020/index.htm
states "... NewDeal Office, an OS / GUI / office suite from NewDeal Inc.
that can run
on PC's as simple as a 286, 640KB RAM, CGA display, and 9MB hard disk
space."

>From the same guy:
http://www.geocities.com/CapeCanaveral/Hangar/9020/geos/history.htm
This page is very interesting (and accurate).


For more info about the Communicator try
http://www.communicator.org/links.htm


Mike

--
Mike Little <mike@ampersoft.co.uk>
work: <m.little@servicepower.com>
Web: http://www.ampersoft.co.uk
PGP public key at http://www.ampersoft.co.uk/mike/mike.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 00:20:25 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Plain text
Comments: To: Ed Keefe <emkeefe@USWEST.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> If you're trying to add a category field to Phonebook, be aware that the
> limit is one category field per database (includes phonebook).

> Let's see if this comes up on the list as plain text. It doesn't look like
> it on my Outlook Express screen even though the Plain Text option is chosen.

Plain text on my system.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 19:47:11 -0500
Reply-To:     garyc@tir.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Gary F. Carne" <garyc@TIR.COM>
Subject:      Re: html editor for the hplx
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Thanks for all the response on this.   I have downloaded the MACROs they seem
to be just what I was looking for.

Thanks again,
Gary

Mike Kopplin wrote:

> If you're talking about the macros, I haven't made any changes for several
> months. They serve my needs. Feel free to make any suggestions.
>
> Mike Kopplin
> http://www.technoir.nu:8080/hplx/htmlmac.htm
>
> > Is anyone currently working on this?
> >
> > > Oops -- you're right, looks like they're not there.  Maybe I heard
> > > about the macro set on the list... Or maybe I hallucinated it  8->>
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 20:19:58 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Can't get HV to show sites
Comments: To: "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> > So... what didn't I setup correctly?
>
> Who is your ISP provider?

IBM.NET (which is now AT&T).

I'm doing email and news groups with WWW/LX just fine; it's only
HV that is giving me problems.

Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 20:20:07 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: 200LX for a journal
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> > HPCRACK.ZIP exists on SUPER to brute force crack the HP encryption and
> > show that it isn't very strong.  If you want good encryption why not
> > store your db files on a SecureDevice encrypted drive?
>
> I don't think it's a brute force crack; doesn't "brute force" imply just
> testing passwords and letter/number combos until you find one that works?
> HPCRACK works by employing knowledge of the algorithm and method used to
> encrypt the files.

Good point; however it still exists to show that the built in encryption
is less than "very secure" and that is what people need to know.

Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 21:03:31 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      Re: X-finder viewer
In-Reply-To:  <199911192314.PAA03049@avocet.prod.itd.earthlink.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>
> #Viewer setting (lex, le, vvc, miel, view, pn200, list etc)
> %v ,0 ,u||$c %p%c; $m {x2ff5}{Paste}{xd000}                 #QuickView
> #%v ,/" ,$v                                                 #XF Viewer
>
Well, I got Quickv to work fine, using Peniel's line:

%v      ,       ,$c %p%c; $m {x6a00}{Paste}
                               key used
What does the extra {xd000} do? what key is it?

Darren.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 19:08:35 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ashwin Balan <husk469@NETZERO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ashwin Balan <husk469@NETZERO.COM>
Subject:      WWW/LX Update??
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Just out of Curiosity is there a new Web Browser in the works with Frame
Support and Java Support?? thanks

__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 22:26:38 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Sean Hoger <shoger@BUYRITE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Sean Hoger <shoger@BUYRITE.COM>
Subject:      Tide Program
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Hi All

Anyone know of a good tide (high/low etc.) program that will run on a 95 and
or 100/200?

TIA

Sean

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 21:13:59 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Dan Ridenhour <driden@STLNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Dan Ridenhour <driden@STLNET.COM>
Subject:      Re: WWW/LX Update??
Comments: To: Ashwin Balan <husk469@NETZERO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

-----Original Message-----
From: Ashwin Balan <husk469@NETZERO.COM>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Friday, November 19, 1999 9:12 PM
Subject: WWW/LX Update??


>Just out of Curiosity is there a new Web Browser in the works with Frame
>Support and Java Support?? thanks


I doubt you will see Java support as that would mean running a Java VM under
an 8 or 16mhz 80186 which would probably crawl at an unexceptable rate.
Frames
would be cool though :)

Just my 2 cents.

Dan
driden@stlnet.com


>
>__________________________________________
>NetZero - Defenders of the Free World
>Get your FREE Internet Access and Email at
>http://www.netzero.net/download/index.html
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 20:44:00 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: X-finder viewer
Comments: To: Darren Frick <dfrick@SNIP.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri, 19 Nov 1999 22:49:40 -0500 (EST)

01h48m05s ago ...
On Fri, 19 Nov 1999, Darren Frick wrote:

> %v      ,       ,$c %p%c; $m {x6a00}{Paste}
>                                key used
> What does the extra {xd000} do? what key is it?

Hmmm - I think that's ShiftSpace (Zoom).  Selects the small font
size.  I don't use it with my ageing eyeballs  <g>


Later

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 01:06:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Definite cutoff date established for all DOS access to Compuserve

Hi All,

I've sent this clip out via private email to a few members and realized
that this info should be offered on the list, as well:

Bad news...  I was finally able to make contact with a knowledgable human
at Compuserve,  and after approx 2 1/2 hours on the phone, I was finally
transferred to someone there who knows about the old acCIS DOS access
software.  They told me that the old compuserve servers that offer acCIS
v4.0 access are DOS servers on the old cis system. acCIS v4.0 cannot
connect with the newer csi servers that will only handle windows software
access.

Compuserve is now prohibiting new subscribers from accessing to the old
cis DOS servers for acCIS v4.0 access because it has been known
internally for a quite some time now those servers will be phased out.
Well, those servers NOW have a definite shutdown date and all old-timers
who still have access to the old cis servers will soon get an email
announcing that those servers are being phased out and will be shut down
soon.  There will be no more DOS access for even those old-timers with
current access!

So, to summarize:

The rumors turned out to be correct.  The acCIS v4.0 Compuserve access
software is worthless to new Compuserve subscribers and will soon be
completely useless to even the old-timers who currently have access with
the acCIS v4.0 software!

Not exactly feeling cheery about this one...

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 01:07:47 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peter W <peterw@USA.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peter W <peterw@USA.NET>
Subject:      US Re: Anyone use a HP + WWW/LX + TELNET/LX on SprintPCS's new
              wireless data services
In-Reply-To:  <19991120050055.19191.qmail@nm199.netaddress.usa.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

At 12:00am Nov 20, 1999, Automatic digest processor wrote:

> Date:    Fri, 19 Nov 1999 15:14:12 -0600
> From:    Dan Ridenhour <driden@STLNET.COM>

> -----Original Message-----
> From: David Sargeant <david@HPLX.NET>

> >On Fri, 19 Nov 1999, Dan Ridenhour wrote:
> >
> >> Im looking at the new wireless web services offered by SprintPCS

> >Is this unlimited access?  Where can we find more info (web page or
> >something)?

> From what ive gathered talking with various techs etc... the straight
> use of the phone as a modem goes against your normal talk time so for
> example their 50/500 holiday special would give you 500 minutes of
> connect time for $50 a month, which isnt that bad.

Check on that. I understood that "modem" time counts against both
base/voice _and_ "wireless web" time allotments. This makes sense
architecturally. Both voice and data calls send data from the phone to
Sprint, but "modem" usage means the Sprint servers have to treat the
phone's data stream differently, channeling it to a modem rack at Sprint
that connects to your dialup server. I doubt that it's so much more
complicated as to justify the extra cost, but if there's demand... So I
think the 50/500 might only get you 50 modem minutes and 450 voice, but
almost certainly not 500 modem minutes.

> Date:    Fri, 19 Nov 1999 15:32:49 -0600
> From:    Dan Ridenhour <driden@STLNET.COM>

> Yea my problem is i need a telnet client which leaves out a number of
> the wireless options and makes the Palm VII a paperweight

You could ignore the silly wireless stuff and hook up the phone anyway. ;-)

> I use both HPs and a Palm V which both have serial ports and since the
> phone acts as the modem theres no heavy draw on the devices power due
> to a PC card.  Ive seen it work on Palms and Win9x machines but havent
> heard of it used with an HP... which of course prompted my original
> post. :)

By all accounts I've read, it acts like a generic modem. You know you
could use a telnet (or even SSH) client with the Palm, right? For routers
that doesn't make sense, but for remote admin of Unix boxes it does. In
either case, I'd much rather have a full keyboard and display.

-Peter

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 04:07:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              PETER SWINBANK <PETERSWINBANK@COMPUSERVE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         PETER SWINBANK <PETERSWINBANK@COMPUSERVE.COM>
Subject:      Geoclock Ver 4.4
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=ISO-8859-1

I' m experiencing trouble selecting maps using the cursor. I've already
spent a lot of time trying to fix it.   I am running GeoClock on my 200LX=

4Mb without any other problems - but this one is really frustrating me.  =
I
have about 30 maps loaded at the moment.  From the World Map display, if =
I
press "S" to select,  the display changes from a map to a list of maps an=
d
the cursor goes to the bottom of the screen - fine.  Pressing the Down
Arrow cursor key twice sends the cursor back up to the top of the screen =
-
one down from the top actually - ok.  Pressing the Down Arrow a further 1=
0
times, everything behaves as you would expect.  THEN, on the eleventh pre=
ss
the cursor jumps to the bottom of the screen.  I will describe what happe=
ns
next if anyone out there recognises this behaviour - what is happening
please?  Is it something unique to the 200LX  - does anyone use Geoclock =
on
a desktop?  Is it something to do with "12", the screen display can hold =
up
to 24 lines (one title bar for the columns and 23 map references)? =

A hope Eugene Dorr sees this message because he seems to be the expert on=

GeoClock.  His archive provided the files and procedures to set GeoClock =
up
on the 100/200LX.  If not, can anyone tell me his Email address please?
TIA

Peter Swinbank

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 04:58:43 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      Re: Definite cutoff date established for all DOS access to
              Compuserve
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sat, 20 Nov 1999 09:48:29 +0000 (GMT)

03h30m07s ago ...
On Fri, 19 Nov 1999 22:18:22 -0800 (PST), John J Vanderstel wrote:

> Compuserve is now prohibiting new subscribers from accessing to the old
> cis DOS servers for acCIS v4.0 access because it has been known
> internally for a quite some time now those servers will be phased out.

Maybe you confuse protocol with operating system? I am aure
any DOS program using HMI (like acCIS 4.0) will keep going. That's all
the WinCIM products do - use HMI. But yes the old DEC sevrers
supporting the ascii protocol have been gradually phased out over the =
last
couple of years.

> Well, those servers NOW have a definite shutdown date

31.12.99 ?

> So, to summarize:
>
> The rumors turned out to be correct.  The acCIS v4.0 Compuserve access
> software is worthless to new Compuserve subscribers and will soon be
> completely useless to even the old-timers who currently have access =
with
> the acCIS v4.0 software!

This would be true if you replace the 4.0 with 3.0 or 2.0, but accis4.0
uses HMI and this protocol continues. Of course I may be wrong! Maybe
you can check with your source again?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 11:09:04 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: WWW/LX Update??
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>Just out of Curiosity is there a new Web Browser in the works with Frame
>Support and Java Support??

Java? They told, that Java is platform independent. It doesn't work in DOS.
Why would someone need Java on a Palmtop?
Is there anything lx-usable, that cannot be done without Java?
On the web they could use Serverside Java. This produces pages, that are
browsable by HV too. When a Webmasters produces code, that stops some
of his customers from browsing, does he really have an important message?

-goe-

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:::::::::::::::
*** Goeldi Engineering
*** Webdesign, Usability and Information Architecture
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:::::::::::::::

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 11:13:07 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: WWW/LX Update??
Comments: To: Dan Ridenhour <driden@STLNET.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>I doubt you will see Java support as that would mean running a Java VM
under
>an 8 or 16mhz 80186 which would probably crawl at an unexceptable rate.


They promote it with the toasters running Java. They can run toasters with
Java,
but no LX?

Hey, you can run Perl on the LX. Is much better.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 11:52:06 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      IRC/LX + ICQ? (could a dasoft programer coment this?)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

To whom it might concern.

While dasoft is into chat program, how about ICQ and maybee a chat
package - "chat/lx"?
I dont know if You know of ICQ but it is very common here in Sweden.
Anyhow. I was thinking that it might be possible to have ICQ "inside" the
IRC/LX or even have it as a separate software.
There already exists a ICQ for DOS (micq) but it is for wattcp. WWW/LX is =
my
choice so it would be nice to have it in the WWW/LX suite and not
having to disconect just to check ICQ.

This might be a hard thing to do but then again it could be fairly
easy. (im not a very good programer so I am not the one to judge.)
The source code is avilable at:
http://www.members.tripod.com/~ladsoft/micq.htm
As I see it, one would have to modify it to use the WWW/LX API and
compile it.

Just an idea.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 05:56:53 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Dan Ridenhour <driden@STLNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Crystal upgrade (Was: WWW/LX Update?)
Comments: To: Dan Ridenhour <driden@STLNET.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Dan wrote:

"I doubt you will see Java support as that would mean running a
Java VM under an 8 or 16mhz 80186 which would probably crawl at an unexcept=
able rate.
Frames would be cool though :)"

I asked Avi about frames,it was about one year ago,and he said that=
 it was impossible to view frames with the LX,you would only see a mess=
 on the screen if they tried to support it.He never explained if this=
 would depend on the resolution or the low speedrate,though.

Anyhow,is it possible to do yet another crystal upgrade?

Has here been any discussions about this?

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 05:56:59 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Definite cutoff date established for all DOS access to
              Compuserve
Comments: To: John J Vanderstel <j_vanderstel@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

From:         John J Vanderstel <j_vanderstel@JUNO.COM>


John Vander Stel wrote:


"Bad news...

Couserve is now prohibiting new subscribers from accessing to
the oldcis DOS servers for acCIS v4.0 access because it has beenknown=
 internally for a quite some time now those servers will be phased out.=
 soon.  There will be no more DOS access for even those old-timers with=
 current access!
Not exactly feeling cheery about this one..."

Well,starting an ISP is apparently not so difficult.The university I=
 attended to a couple of years ago had an own ISP
service which was operated by some voluntary students.
I had this ISP for almost a year and it worked fine both with my LX=
 and PC.The only difference was that it couldn't handle bigger emails=
 than 1Mb.

And as it is said that you americans are masters of do-it-your-self=
 :-),I guess there is no need for doomsday prophecies.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 07:01:42 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Fluff: FreeCell 159520
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

For all you FreeCell fans... I've found game 159520 a bit harder than
the average.  Thanks again Curtis!

Cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 13:03:16 +0100
Reply-To:     Etienne Lemaire <stelem@attglobal.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Etienne Lemaire <etienne.lemaire@PANDORA.BE>
Subject:      Re: Tide Program
Comments: To: shoger@BUYRITE.COM
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I found the following info in my notes from the mailing list:
-Nautical Software has a program called Tides & Currents for  DOS that works
well on the HP200LX.  It includes Moon Data,  Daily Highs and Lows for
specific locations as well as Average Tides.
http://www.tides.com/
-There is an older dos program that works on the HP LX.  It is somewhat slow
and I don't remember where
I got it but it is called Tides V3.09 .
They have a very nice graphical software that works on the HP.
-You could do a lot worse than download tide24.zip from
http://vancouver-webpages.com/peter/index.html   (a splendid collection
of shareware and freeware for boat owners and GPS enthusiasts)
This has pretty good global coverage of tidal harmonic constants and
works just fine on my 200LX (it's a bit slow on a single speed unit,
but then it is doing a lot of number crunching).   The graphical
output fits the screen nicely too.
If you want to estimate currents as well as heights you could look at
the tides303, 304 etc... series on the same site but the displays aren't
as good on the palmtop.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 07:26:26 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      X-finder & mem
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I can get X-finder to run mem from the command section of X-finder, but when
I ry to add "/d|more" it wont work. Any thoughts?

Darren

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 07:26:25 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      X-finder & XGREP
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Anyone using XGREP with X-finder?

It would seem useful to run XGREP on a file or a directory and have a
dialogue come up asking for the parameters. I've been fiddling around but
can't come up with anything satisfactory.

Darren

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 08:35:43 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: IRC/LX + ICQ? (could a dasoft programer coment this?)
Comments: To: Tomas Moberg <Tomas.Moberg@ABC.SE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thomas wrote:


"I dont know if You know of ICQ but it is very common here in
Sweden.
There already exists a ICQ for DOS (micq) but it is for wattcp."


Have you tried to chat with micq with your LX?If yes how did it worked?



Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 15:02:50 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: WWW/LX Update??
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>>"They promote it with the toasters running Java. They can run
>>toasters with Java,but no LX?Hey, you can run Perl on the LX. Is much
better."

>What do you mean with toasters?You can't possible mean breadtoasters?

In the beginning Java was designed as an operating system for easy machines
as Bread-Toasters (Yep!), Videorecorders and so on. You can perhaps find
more
and deeper information about this on the web. But I think you can't browse
it with
HV, if they really use Java. Serverside Java (so-called servlets) produce
HTML
code that is LX-readable.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 09:12:53 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              lloo@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <lloo@WORLDNET.ATT.NET>
Subject:      Re: Geoclock Ver 4.4
Comments: cc: PETERSWINBANK@COMPUSERVE.COM

   >A hope Eugene Dorr sees this message because he seems to be the
   >expert on GeoClock.  His archive provided the files and procedures to
   >set GeoClock  up on the 100/200LX.  If not, can anyone tell me his
   >Email address please? TIA
Message-Id: <19991120141250.ZKHZ11314@12.72.155.120>
Date: Sat, 20 Nov 1999 14:12:50 +0000


My 1998 version of his Visible Clock shows edorr@pobox.com  in the help
section.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 09:13:01 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              lloo@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <lloo@WORLDNET.ATT.NET>
Subject:      Re: X-finder & mem
Comments: cc: dfrick@SNIP.NET

   >I can get X-finder to run mem from the command section of X-finder,
   >but when I ry to add "/d|more" it wont work. Any thoughts?
Message-Id: <19991120141258.ZKJG11314@12.72.155.120>
Date: Sat, 20 Nov 1999 14:12:58 +0000

I don't use X-Finder, but maybe it's getting confused by the piping
character (vertical bar) ... plus that operation is really running two
programs (mem and more).

A suggestion might be to make a simple batch file and have just a single
line:

        d:\dos\mem.exe /d | more

and invoke the batch file from X-Finder.  This approach works on the
standard AppMgr.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 09:13:07 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              lloo@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <lloo@WORLDNET.ATT.NET>
Subject:      Re: X-finder & XGREP
Comments: cc: dfrick@SNIP.NET

   >Anyone using XGREP with X-finder?
   >It would seem useful to run XGREP on a file or a directory and have
   >a dialogue come up asking for the parameters. I've been fiddling
   >around but can't come up with anything satisfactory.
Message-Id: <19991120141304.ZKKH11314@12.72.155.120>
Date: Sat, 20 Nov 1999 14:13:04 +0000

The HDM program (an older AppMgr substitute) has an option to "open with
arguments") that I use for what you're trying to do. I use it for my
dictionary program so I can enter the word being looked up (and therefore
don't have to load the program as a TSR).

With all its bells and whistles, I'd be surprised if X-Finder didn't have
something similar.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 07:21:43 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: X-finder & mem
Comments: To: Darren Frick <dfrick@SNIP.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sat, 20 Nov 1999 09:22:32 -0500 (EST)

01h58m07s ago ...
On Sat, 20 Nov 1999, Darren Frick wrote:

> I can get X-finder to run mem from the command section of X-finder, but =
when
> I ry to add "/d|more" it wont work. Any thoughts?

Hi Darren -

I think the problem is that XF uses the DOS pipe symbol (|) as its own
command switch.  I tried your command from the XF DOS command box - and
nothing...  Then tried creating a batch file with the line mem /d|more
and that works.  It's a kludge, but it works.

BTW - I goofed in my last post.  I should have written FnSpace -
not ShiftSpace.  Sorry, guess by alleged brain needs rebooting.


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 16:01:47 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: filer backup

Paulo Custodio writes:
> I use syndir for my incremental backups: it updates a copy on the flash
> card of the C: disk, removing files that were removed in the source.
>
> My backup script is:
>         syncdr16 c:\ a:\_bak_c_ /a/u/dd/f/r/v
>

I considered syncdir, but as what I am after is an efficient way to backup
both my a: and c: drives to my pc over the serial link. I do not have access
to a PC Card reader on my desktop, so through the serial link is the way I
want to go. Syncdir needs to send a lot of information over the link
while checking the dates of the files. I wonder whether this would be more
efficient than xcopy (which I use now), which backs up according to the
archive bit.

Which is a better idea? To copy files whose archive bit is set or by their
date stamp?



======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 16:15:08 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: Pocket Launcher and DOS

Don Puscher writes:
> Pocket Launcher seems like a really great program but I can't get it to start
> some of my DOS programs correctly. For example, when I try to launch SHASS it
> will start the program but doesn't see the inventory file. In 200Mnu the
> command line is
>
> &Shass=a:\bin\shass\shass.exe # a:\bin\shass
>
> The first part tells it to start the program, the second where it should look
> for data files (# is a field divider).

Just as a matter of clarification, 200MNU takes the above command and writes
a batch file as follows:

cd a:\bin\shass
a:\bin\shass\shass.exe

This is how it "tells" the application how to "find" data files. How Pocket
Launcher works I have no idea.

By the way I am the author of 200mnu and am currently working on some new
features for an upgrade. Stay tuned...


======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 21:59:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: PCMCIA Modem
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Isn't the 200LX rated at 1 amp current for the power supply?
If you draw 5x the power the slot was designed for you are
opening yourself up to several kinds problems: heat, blown
fuse, or, if your lucky, it will just draw too much power and the
200LX simply won't power up...

Just my opinions,

Ken
khansen@njcc.com

-----Original Message-----
From: Martin Doering <Martin_Doering@MN.MAN.DE>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Thursday, November 18, 1999 11:00 AM
Subject: PCMCIA Modem


Hi!

I'm owner of a PCMCIA modem. In my laptop this gets preety warm. So I think
it
needs more than the 150 mA of power.

What will happen, if it is for example 800 mA? Will my 200 LX break or will
it
just not functioning?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 08:04:12 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Kopplin <kopplin@TECHNOIR.NU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Kopplin <kopplin@TECHNOIR.NU>
Subject:      Re: Crystal upgrade (Was: WWW/LX Update?)
In-Reply-To:  <HPLX-L%99112005565321@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

> Anyhow,is it possible to do yet another crystal upgrade?
>
> Has here been any discussions about this?

I've seen some references to running the LX at 2.27x on some Japanese web
sites.

Mike Kopplin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 08:22:29 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: X-finder & XGREP
Comments: To: Darren Frick <dfrick@SNIP.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sat, 20 Nov 1999 10:13:17 -0500 (EST)

02h48m54s ago ...
On Sat, 20 Nov 1999, Darren Frick wrote:

> It would seem useful to run XGREP on a file or a directory and have a
> dialogue come up asking for the parameters. I've been fiddling around =
but
> can't come up with anything satisfactory.

Hi again...

Took a while to look over the xgrep syntax.  At the moment, I can't
think of a way to do EXACTLY what you want.  Looks like xgrep wants
the directory or file as the last parameter, so you basically need
the search specs there before the file specs.

Longden mentioned the HDM "Open with arguments" facility, and (of
course) XF can do something similar.  Try picking xgrep in the XF file
manager screen & hitting Enter or F10 (DOS) - You'll get a dialog
where you can add your options and parameters.  If you want to start
it from an icon, create a symbolic link (.xff) file, and it'll work
the same way.

Otherwise, I can't think of a way to have XF automatically pass the
file or directory specs, but pop up a dialog for just the search specs.
Maybe some of the other XF folks have some ideas...


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 16:49:09 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin_Doering@MN.MAN.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Doering <Martin_Doering@MN.MAN.DE>
Subject:      PAL's DOS-specific system calls
Content-transfer-encoding: quoted-printable
Content-type: text/plain; charset=ISO-8859-1
Mime-version: 1.0

Hi!

I'm relativly new to c programming=2E I ever "just" developed on Linux or HP-UX=2E
So I never read something about far pointers (segmented memory?) or bios calls
or something like CallInt:

void PlotDot(int x, int y)
{
CallInt(0x5f, 0x0700, 0, x, y, NULL);
}

These routines seem to be DOS/BIOS/CGA?!? specific?=20=


Is there a recource on the web, where I could read about these specifics? The
PAL Documentation is not too extensive:

NAME
SetLineType

DESCRIPTION
SetLineType defines the shape of the lines displayed by the Line()
and Rectangle() functions=2E

SYNOPSIS
#include "pal=2Eh"
void SetLineType(unsigned int LineType);

INPUTS
LineType - This is a 16-bit (integer) which defines the shape of
the line=2E Use  value 0xffff for solid line (default)=2E

But how does the other linetypes look etc=2E?

I (try to) use Turbo C 2=2E01=2E Is there some documentation for it? There seem t=
o
be none on the install disks=2E


Regards,

Martin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 10:56:20 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Nokia 9110 Communicator/will HP200LX run GEOS?
Comments: To: Franklin Eekhout <franklin@ONLINE.NO>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Some guy wrote:

> 4. Does it surf the web?

Franklin aswered:

"Yep! And email. and fax. We used it on Yahoo and Alta Vista
too."

How about frames and Java?

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 11:19:52 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Joerg Scheiner <Joerg.Scheiner@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Joerg Scheiner <Joerg.Scheiner@GMX.DE>
Subject:      Re: Free POP3 email server
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Of what benefit is a free POP3 email server to an LX user?

I subscribed for gmx now because I am going to cancel my compuserve =
account and want to get a permanent e-mail address. In Germany we have =
now severel call-by-call Internet service providers who allow dial in =
with the hp200LX. And sometimes they give you a free POP3 mailbox but it =
can only be accessed when dialing in through their ISP so call-by-call =
bye-bye.

And I can use any internet terminal to get my mail in case I have trouble =
logging in with the lx while on the road.

Regards
 Joerg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 08:22:24 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              smoore <smoore@EFFECTNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         smoore <smoore@EFFECTNET.COM>
Subject:      PCMCIA Disks Available and 16 Meg Memory!
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I  have (11) 20 Meg PCMCIA Flash Disks ATA Type II available. They are
in excellent condition. They have only been used a  very few times on
testing a couple new prototype products at work. I sell (1) 20 Meg
PCMCIA disk for $35.00 plus $5.00 shipping and I sell (2) disks for
$65.00 plus $5.00 shipping. I accept Money Orders Only! I also have (10)
16 Meg 72Pin EDO Simms for sale. I sell (1) 16 Meg Simms for $15.00 and
I sell (2) or more for $13.00 a piece plus $3.00 shipping . You can send
payment to my
 address at:

Scott Moore
20455 S.W. Kirkwood Street
Beaverton, Or 97006

I will email you back  the day I receive your payment and let you know
that your disks our on the way. I always send out next day unless I
receive your payment on a Saturday and then I will send them out on
Monday. Please email me and let me if you are interested and when you
are sending payment so I can hold your disks for you. The response has
been tremendous and the people I have worked with on this group have
been great.  Thanks alot!   Scott

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 17:22:57 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laust Brock-Nannestad <laustbn@DIKU.DK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laust Brock-Nannestad <laustbn@DIKU.DK>
Subject:      Re: PAL's DOS-specific system calls
In-Reply-To:  <TFSEZFYQ@mn.man.de>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 20 Nov 1999, Martin Doering wrote:

...
> INPUTS
> LineType - This is a 16-bit (integer) which defines the shape of
> the line. Use  value 0xffff for solid line (default).
>
> But how does the other linetypes look etc.?

I would imagine that the other line types are simply the binary
representation of the 16-bit integer (unsigned), mapped to 16 pixels - for
example the 16-bit value 0xaaaa which is the equivalent of 101010...* in
binary would make a dotted line, with alternating on and off pixels.

That was the way it was on the 95LX at least. I would be surprised if the
200LX used a different scheme.

> I (try to) use Turbo C 2.01. Is there some documentation for it? There seem to
> be none on the install disks.

TC 2.01 comes with built-in help (via F1), which IIRC, is pretty good. It
is also context sensitive, press Ctrl-F1 (I think) over a keyword or
standard library function and it will describe it.

Please note that the built-in help is only available from with in the TUI.
Outside it, you can load the same functions via the TSR thelp.com.
However, this only works in text mode and thusly not with editors such as
PalEdit, or the System Manager.


Cheers,

Laust

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 11:27:47 -0500
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: WWW/LX Update??
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Stephan Goeldi from Switzerland I just asked Goeldi off-list where=
 on earth he is living,couldn't figure out what .CH meant:-)   wrote:

"Java? They told, that Java is platform independent. It doesn't
work in DOS.Why would someone need Java on a Palmtop?
Is there anything lx-usable, that cannot be done without
Java?On the web they could use Serverside Java. This produces pages,that=
 are browsable by HV too. When a Webmasters produces code, that stops=
 some of his customers from browsing, does he really have an important=
 message?"

Thanks for that refreshing answer Goeldi!This is an attitude
which all LX users should have.Stop accepting all only-the- latest webdesig=
n crap they want to subject us to.
Your email has inspired me to fire off several emails to webmasters=
 I know of,demanding alternative!!

You also wrote:

"They promote it with the toasters running Java. They can run
toasters with Java,but no LX?Hey, you can run Perl on the LX. Is much=
 better."

What do you mean with toasters?You can't possible mean breadtoasters?=





Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 06:26:26 -1000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Graham <bgraham@HAWAII.RR.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Graham <bgraham@HAWAII.RR.COM>
Subject:      Re: Tide Program
Comments: To: Sean Hoger <shoger@BUYRITE.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I have been using Shareware TIDES for years now. It has tide
table constants for most of the world. The address in the
documentation is:
Edward P. Wallner
32 Barney Hill Road
Wayland, MA 01778-3602
(508)358-7938
You should be able to find it on TUCOWS.

When it starts up on the HPLX the screen it is trying to start a
color screen, just hit On-* to switch to Monochrome.

Aloha - bob     \ooo_

------------------------------

Date:    Fri, 19 Nov 1999 22:26:38 -0500
From:    Sean Hoger <shoger@BUYRITE.COM>
Subject: Tide Program

Hi All

Anyone know of a good tide (high/low etc.) program that will run
on a 95 and
or 100/200?

TIA

Sean

------------------------------

--
        -------
<http://home.hawaii.rr.com/bgraham/>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 18:17:46 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      www/lx and irda with Ericsson SH888
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Just to be sure after al the discussion about the RF interference with
cellular phones.
I borrowed a SH888 and am now using it to send this message.

But I did experience some problem when it got closer than 2 decimeters
to the hp200lx.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 12:23:26 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Re: Crystal upgrade (Was: WWW/LX Update?)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Lars wrote:
> I asked Avi about frames,it was about one year ago,and he said that it =
was impossible to view frames with the LX,you would only see a mess on =
the screen if they tried to support it.He never explained if this would =
depend on the resolution or the low speed> rate,though.
>
> Anyhow,is it possible to do yet another crystal upgrade?
>
> Has here been any discussions about this?

Perhaps if the Morphy One is a success (and we beg them long
and hard enough!), then D&A might consider programming a new
browser with frames capability. The resolution shouldn't be
a problem - there's always scroll bars - and the 486/32MB
combination would supply more than adequate speed and
memory. Unfortunately, this is all very hypothetical at the
moment...

From what I recall, memory constraints were the main reason
as to why HV could not be improved upon for the LX. But, if
HV is compatible with the new WAP standard (presumably, WAP
is a cut-down version of the latest HTML standard - is
it?), and if that standard becomes popular, then HV could yet
enjoy a new lease of life.

 -Mike http://games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 12:33:52 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              smoore <smoore@EFFECTNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: PCMCIA Disks Available and 16 Meg Memory!
Comments: To: smoore <smoore@EFFECTNET.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

The known person Scott wrote(as usual):


"I  have (11) 20 Meg PCMCIA Flash Disks ATA Type II available.
They arein excellent condition. They have only been used a  very fewtimes=
 ontesting I will email you back  the day I receive your payment and=
 letyou know"

But I remember one guy here on the mailinglist who complained about=
 you,he told us that he had ordered one memorycard from you and you=
 had sent it only wrapped into some paper,and when he got it it was=
 destroyed.When he complained to you,you only said that it wasn't broke=
 when you sent it and did not care more about it.

So due to this story, I am personally  hesitant buying stuff from you.


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 11:51:28 -0600
Reply-To:     Maynard Riley <maynard@interaccess.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Maynard Riley <maynard@INTERACCESS.COM>
Subject:      Re: filer backup
Comments: To: "davidb@netmedia.net.il" <davidb@netmedia.net.il>
In-Reply-To:  <199910201601.PNR04773@netmedia.net.il>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

David,

How do you use xcopy over a serial link?

        `~Maynard


On Sat, 20 Nov 1999 16:01:47 +1000, David Becher wrote:

>Paulo Custodio writes:
>> I use syndir for my incremental backups: it updates a copy on the flash
>> card of the C: disk, removing files that were removed in the source.
>>
>> My backup script is:
>>         syncdr16 c:\ a:\_bak_c_ /a/u/dd/f/r/v
>>
>
>I considered syncdir, but as what I am after is an efficient way to backup
>both my a: and c: drives to my pc over the serial link. I do not have access
>to a PC Card reader on my desktop, so through the serial link is the way I
>want to go. Syncdir needs to send a lot of information over the link
>while checking the dates of the files. I wonder whether this would be more
>efficient than xcopy (which I use now), which backs up according to the
>archive bit.
>
>Which is a better idea? To copy files whose archive bit is set or by their
>date stamp?
>
>
>
>======================
>David Becher
>davidb@netmedia.net.il
>davidb@cimatron.co.il
>======================
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 09:53:18 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              smoore <smoore@EFFECTNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         smoore <smoore@EFFECTNET.COM>
Subject:      Hello! Lars! PCMCIA Disks
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Lars, I want you to know that I have sold many disks on this site all
over the world and I have honestly only had one complaint for that
individual. I told him I would replace the disk and I have been sending
all my disks in padded envelopes and wrapped ever since. Sorry for you
hesitation! I just sold Tomas in Sweden a disk on this site as well and
he is very happy with the disk.  Thanks alot for posting your concern
though. I  honsetly understand that one individual can make start
concern on this site but for the other 50-80 people I have worked with
they have been just Great!    Thanks alot!    Scott

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 20:32:05 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: PAL's DOS-specific system calls

Martin Doering writes:
> Hi!
>
> I'm relativly new to c programming. I ever "just" developed on Linux or HP-UX.
> So I never read something about far pointers (segmented memory?) or bios calls
> or something like CallInt:
>
> void PlotDot(int x, int y)
> {
> CallInt(0x5f, 0x0700, 0, x, y, NULL);
> }
>

CallInt is a function in the PAL library, which simply generates an interrupt.

The function can be found in (PAL16)\SRC\MISC\CALLINT.C

The function calls interrupt 5f with the rest of the parameters being passed
to the interrupt. What is an interrupt? It is a way of calling a function which
is part of the bios/ operating system. Interrupt 5f is Hp Palmtop specific
and is where a lot of the low level graphics of the HPLX and the Pal library
take place. You dont really need to know more details than this to use PAL.
If you want more details of the specific interrupts used by the HPLX you can
purchase the HPLX SDK from Thaddeus (www.palmtoppaper.com).

If you want details of other interrupts used by Personal Computers, there is
a very large list of Interrupts which you can download, but the name of the
site escapes me right now.


======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 20:29:38 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      IR PRINTING FROM WORD AND CGAHLP.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Greetings to all,

The Word menu on the palmtop can be read more easily if the
grey shades are suppressed. This can successfully be done
with

cgahlp.com -dmono.dat

Unfortunately however, this blocks IR printing. The IR port on
the printer (HP6MP) blinks, but it does not print and
eventually sends the message "Printer is not ready". Somehow
cgahlp is incompatible with IR.

PE is not affected by cgahlp. Of course, it is not needed here
either.

Is there another TSR or Pgm that suppresses the shades of grey
and is compatible with IR printing ? LXSTAT offers a variety
of display modes, but none of the does the thing.

Thanks in advance for any hint
Winfried

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 11:29:11 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Terrence Chun <tchun@UCLA.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Terrence Chun <tchun@UCLA.EDU>
Subject:      Re: X-finder & XGREP
In-Reply-To:  <199911201322.IAA26162@moon.web2000.net>
MIME-Version: 1.0
Content-Type: text/plain

On 20-Nov-99, Peniel Romanelli wrote:
> Longden mentioned the HDM "Open with arguments" facility, and (of
> course) XF can do something similar.  Try picking xgrep in the XF file
> manager screen & hitting Enter or F10 (DOS) - You'll get a dialog
> where you can add your options and parameters.  If you want to start
> it from an icon, create a symbolic link (.xff) file, and it'll work
> the same way.

I know that this sounds like a bit of a kludge, but perhaps you could write
a batch script in LXBatch.  The script language is very simple and
produces very nice GUI interfaces (there is a nice script for PGP and I am
fiddling with a script to help format medical progress notes quickly).

You could pass the file name that you wish to grep as an argument for your
script which would then go and offer you the various options for grep (you
would have to hard-code these into the script).  At then end it would
execute the command you desired such as "grep <filename> <options>".

It may be more work than you are interested in commiting, but the result
would be very pretty.  Once it was finished, you would just have to
highlight the file you want to grep, press your hotkey (eg, shift-G),
and that would be it!

Like I said earlier, I am just in the early phases of playing with LXBatch,
but the sample scripts that I've seen and the little bit that I've been
able to write have all been very nice.

-- Terry

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 11:57:22 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: WWW/LX Update??
Comments: To: Ashwin Balan <husk469@NETZERO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Just out of Curiosity is there a new Web Browser in the works with Frame
> Support and Java Support?? thanks

Not HV. I do not know of any others.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 11:57:26 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: WWW/LX Update??
Comments: To: Dan Ridenhour <driden@STLNET.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I doubt you will see Java support as that would mean running a Java VM under
> an 8 or 16mhz 80186 which would probably crawl at an unexceptable rate.
> Frames
> would be cool though :)

Probably you are right on this assessment.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 15:37:47 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              smoore <smoore@EFFECTNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Hello! Lars! PCMCIA Disks
Comments: To: smoore <smoore@EFFECTNET.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Scott wrote:


"Lars, I want you to know that I have sold many disks on this
site all over the world and I have honestly only had one complaint for=
 that individual. I told him I would replace the disk"


OK,if you say so.



Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 12:47:44 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Crystal upgrade (Was: WWW/LX Update?)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Lars Hedstroem <nxw988e@TNINET.SE> wrote:

> I asked Avi about frames,it was about one year ago,and he said that
>  it was impossible to view frames with the LX,you would only see a mess
>  on the screen if they tried to support it.He never explained if this
>  would depend on the resolution or the low speedrate,though.

Well, you probably forgot what I wrote to you. I said to you,
and have stated it publicly too, that the viewing frames on
the limited screen of the palmtop is rather useless and would
not convey anything like the frames viewed on a SVGA screen
for example.

Also, the painting of multiple Webdocuments all at once on the
screen is beyond the memory requirements of the palmtop and
chip.

Java, which is what Dan is talking about is another story
altogether, and maybe you confuse frames and Java and
Javascript. To run the latter two, you need a lot of
processing power and that is not available on the palmtop.
Also, it requires fairly large code sets and that is also not
possible on the 80186 chip.

> Anyhow,is it possible to do yet another crystal upgrade?

That is maybe possible, but it is not going to get you frames
or Java on the palmtop.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 12:47:47 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Crystal upgrade (Was: WWW/LX Update?)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Mike Wagstaff <aj93@DIAL.PIPEX.COM> wrote:

> Perhaps if the Morphy One is a success (and we beg them long
> and hard enough!), then D&A might consider programming a new
> browser with frames capability. The resolution shouldn't be
> a problem - there's always scroll bars - and the 486/32MB
> combination would supply more than adequate speed and
> memory. Unfortunately, this is all very hypothetical at the
> moment...

It makes no sense then to write a browser! if you have a 486
chip you can easily run Opera and Windows and Webboy and the
Arachne and maybe even Netscape and if you really want to - MS
Internet Explorer. How do you suppose we would compete with
these (and other products that work just fine a a stronger
chip)? It would make no sense for us to write _another_
browser...

> >From what I recall, memory constraints were the main reason
> as to why HV could not be improved upon for the LX. But, if
> HV is compatible with the new WAP standard (presumably, WAP
> is a cut-down version of the latest HTML standard - is
> it?), and if that standard becomes popular, then HV could yet
> enjoy a new lease of life.

It is memory and screen constraints. I think you are correct
about HV's potential second life with WAP. I am looking for
some Palmpilot VII-specific reduced HTML pages to see what they
look like in HV.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 16:01:48 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      Re: X-finder & mem
In-Reply-To:  <HPLX-L%99112009130100@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> A suggestion might be to make a simple batch file and have just a single
> line:
>
>         d:\dos\mem.exe /d | more
>
> and invoke the batch file from X-Finder.  This approach works on the
> standard AppMgr.
>

Duh, both Longden and Peniel suggested this. It's so obvious. I should get
more sleep before doing these things.

Thanks guys, Darren.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 16:01:50 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      Re: X-finder & XGREP
Comments: To: Terrence Chun <tchun@UCLA.EDU>
In-Reply-To:  <yam7993.565.23341328@smtp.ben2.ucla.edu>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> I know that this sounds like a bit of a kludge, but perhaps you
> could write
> a batch script in LXBatch.  The script language is very simple and
> produces very nice GUI interfaces (there is a nice script for PGP and I am
> fiddling with a script to help format medical progress notes quickly).

Thanks. Terry. I think I'll give it a whirl.

Darren.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 16:24:52 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              S_Carder@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Carder <S_Carder@COMPUSERVE.COM>
Subject:      Re: Other DOS Version on HP 200 LX
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> BTW, I thought the HP95 ran DOS 3.0, not 5.0.

The HP95LX ran DOS 3.3 I believe.  I remember a program that tested for =
the
version of DOS running and used a result of 3.3 to determine that it was
running on a HP95LX.

Steve Carder

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 17:15:44 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Aszumski@CS.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "A. J. Szumski" <Aszumski@CS.COM>
Subject:      Re: PCMCIA Disks Available and 16 Meg Memory!
Comments: To: smoore@effectnet.com
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Hi Scott:

I would like one of the 20 Meg PCMCIA's.  Will get $40 to you via money order
on Monday.  Please confirm that you will hold a card for me.

Thanks,

A. J. Szumski
8402 Ballantrae CT
Richmond, VA 23229

In a message dated 11/20/99 11:22:23 AM Eastern Standard Time,
smoore@EFFECTNET.COM writes:

> I  have (11) 20 Meg PCMCIA Flash Disks ATA Type II available. They are
>  in excellent condition. They have only been used a  very few times on
>  testing a couple new prototype products at work. I sell (1) 20 Meg
>  PCMCIA disk for $35.00 plus $5.00 shipping and I sell (2) disks for
>  $65.00 plus $5.00 shipping. I accept Money Orders Only! I also have (10)
>  16 Meg 72Pin EDO Simms for sale. I sell (1) 16 Meg Simms for $15.00 and
>  I sell (2) or more for $13.00 a piece plus $3.00 shipping . You can send
>  payment to my
>   address at:
>
>  Scott Moore
>  20455 S.W. Kirkwood Street
>  Beaverton, Or 97006

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 17:22:17 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
Subject:      Requesting DB Help! (somewhat long)

Hi all,

Today's puzzle/panic = DB files...

1st - Kudos to Curtis for developing the dB checker!

But .... I've got some DB questions now!  I think my phonebook, etc. may be
corrupt.

I've got 12 .?DB files in my _dat dir and they ALL tested bad!!!

I don't think they are critical errors in every case, but I'm a bit worried.

I don't understand a lot of the dbchecker output, but like having LOTS of
avail. info.

It encounters a "Possible error" when it finds one more record than it
expected to find... For example:

  "984 records expected, 985, found (could be due to FASTDB.TSR)".

What is FASTDB.TSR?

I'm running a DoubleSpeed, memory expanded 200LX. Does Dbchecker consider
Mack's drivers "FASTDB.TSR" or is that something else running around in
memory running Super Software Carousel too, but not MAXDOS (unless it's
hiding in the Super SC config.)?

If that's not a critical error, I'm good-to-go for all but my Phone and
Address databases.

I had an odd "thumb trip-up" while typing too fast and my display went wiggy
(yes, a technical term, I know). The font got very small and odd. Don't know
what combo. I accidentally pressed, but it didn't look good!  It was a font
style change, smaller than Fn-Zoom, and strange looking.  I backed out of
all apps (phonebook and appt. book were open) and, once I got to the DOS
prompt, I rebooted.

Thought there might be a problem w/ the two open apps. (had one entry turn
into a little diamond(!), but 99.9 % was OK. It seemed like a good time to
try the DB Checker!!  Ran one of the batch files and it said it found errors
and dumped out (leaving the .log file).  ALL 12 tested bad!!

I had a good, 2-day-old back-up and restored but things still test bad: All
12 files; so I'm guessing this rules out whatever I did w/ my small
accident.

Been experimenting. Garlic looks like it left my phonebook untouched, except
that the DB is a slightly smaller file AND, it tests as "OK" w/ the DB
Checker....

New_Appt.adb tests OK too; *BUT* it's brought back ToDos from 1997! (<yet
the file size is reduced> I think that's because it didn't keep all the
to-do items from 1999!).

I suppose even the back-ups from two days before the "thumb trip" could be
bad but all 12?

The "expected" to "found" record number difference is higher in the
phonebook and calendar (I copied them to a dir. called garlic, because I was
headed there next!  I'll only copy the .log results from my two "problem"
files to save space:

a:\garlic\APPT.ADB:
1054 records found.
File type: Appointment
.........................................................
1 db header, 0 card def
0 categories, 27 fields defined
0 view point defs, 2 view point tables
2 smart clips, 1 lookup tables
835 data records, 172 with notes
3 lookup table entries flagged as deleted
Possible error: 1015 records expected, 1056, found (could be
due to FASTDB.TSR)
a:\garlic\APPT.ADB had errors.

a:\garlic\PHONE.PDB:
985 records found.
File type: Database
.........................................................
1 db header, 1 card def
1 categories, 16 fields defined
3 view point defs, 4 view point tables
4 smart clips, 1 lookup tables
552 data records, 402 with notes
1 lookup table entries flagged as deleted
Possible error: 984 records expected, 985, found (could be due to
FASTDB.TSR)
a:\garlic\PHONE.PDB had errors.

Any thoughts?

Are these critical errors, or are they about to cause me to have a date-dump
(db crash of some sort)?

TIA for any help and apologies again for the length.

--tim

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 18:39:23 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      Re: Can't get HV to show sites
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sat, 20 Nov 1999 23:31:33 +0000 (GMT)

21h58m41s ago ...
On Fri, 19 Nov 1999 17:32:52 -0800 (PST), Russel Brooks wrote:

> > Who is your ISP provider?
>
> IBM.NET (which is now AT&T).

I just checked the attglobalnet.general newsgroup and it seems there
has been a problem with the attglobal network. Specific to various
dial-up nodes - mainly in the US I think. Pages not found, peer being
reset. Has been going on for a month, driving some old time IBM.NET
subscribers crazy.

Does not seem to be related to the software used to dial-up, or to
browse.

Most unfortunate. No report of a solution or even a description of the
scope of the problem. After a month! :(

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 21:44:51 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Franklin Eekhout <franklin@ONLINE.NO>
Organization: Oslonett!
Subject:      Re: Nokia 9110 Communicator/will HP200LX run GEOS?

>How about frames and Java?

I don't remember, for sure not Java? Frames I don't know, we used it against
a special proxy/filter that the ISP provides/recommends for PDAs. It
'cleans' pages...

Check the Nokia site for such info.

br

Franklin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 18:42:26 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: Definite cutoff date established for all DOS access to
              Compuserve
Comments: To: John J Vanderstel <j_vanderstel@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Starting an ISP with national access is hard, I imagine (remember
that America is a *very* big country, compared with, say,
Lichtenstein ;) I can set up my own personal toll-free internet
access through an AT&T offer that cost me 8 cents a minute,
with a 30 cent surcharge for pay phone access (AT&T Personal
Network) by dialing into my home linux box, which in turn makes
the local call to my ISP.

The issue is getting non-PPP dial-up accounts that are local calls
anywhere in US...

Ken
khansen@njcc.com

-----Original Message-----
From: Lars Hedstroem <nxw988e@TNINET.SE>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Saturday, November 20, 1999 5:57 AM
Subject: Re: Definite cutoff date established for all DOS access to
Compuserve


From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Well,starting an ISP is apparently not so difficult.The university I
attended to a couple of years ago had an own ISP
service which was operated by some voluntary students.
I had this ISP for almost a year and it worked fine both with my LX and
PC.The only difference was that it couldn't handle bigger emails than 1Mb.

And as it is said that you americans are masters of do-it-your-self :-),I
guess there is no need for doomsday prophecies.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 01:52:11 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Stefan.Peichl@T-ONLINE.DE
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stefan Peichl <Stefan.Peichl@T-ONLINE.DE>
Subject:      Re: IR PRINTING FROM WORD AND CGAHLP.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Winfried Zettelmeyer wrote:

> Is there another TSR or Pgm that suppresses the shades of grey
> and is compatible with IR printing ? LXSTAT offers a variety
> of display modes, but none of the does the thing.

you could try LXPRO. If you press '.' while in it's opening
screen, shades of gray become more readable. IR printing is
not affected.

Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 00:54:42 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: IR PRINTING FROM WORD AND CGAHLP.COM
Comments: To: Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Greetings to all,
>
> The Word menu on the palmtop can be read more easily if the
> grey shades are suppressed. This can successfully be done
> with
>
> cgahlp.com -dmono.dat

Can't you install Word for a mono or lcd screen?  Are you talking about
MS Word 5.0 or 5.5?

And does it print to IR if you don't use cgahlp?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 00:54:54 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: X-finder & XGREP
Comments: To: Terrence Chun <tchun@UCLA.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> produces very nice GUI interfaces (there is a nice script for PGP and I am
> fiddling with a script to help format medical progress notes quickly).

Where is this lxbatch file for pgp?  I actually have not looked at pgp
but have been thinking about it for a while.....  Thanks.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 02:36:52 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Re: IRC/LX + ICQ? (could a dasoft programer coment this?)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Have you tried to chat with micq with your LX?If yes how did it worked?
>
> Lars Hedstroem/Sweden

Oh Yes!
I have used MICQ to chat. Almost daily.
It works very well.
Its not the fancy windows interface, but its quite usefull.
I have managed to strip it down to 120Kbytes.
Thanks to "Compack" (found on super). That program realy have saved me
some disk space.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 18:51:54 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      LXPGP (Was Re: X-finder & XGREP)
Comments: To: fjkaufman@WORLDNET.ATT.NET
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sat, 20 Nov 1999 20:57:50 -0500 (EST)

01h02m56s ago ...
On Sun, 21 Nov 1999, F. Kaufman wrote:

> Where is this lxbatch file for pgp?  I actually have not looked at pgp
> but have been thinking about it for a while.....  Thanks.

I think it must be LXPGP.  It's on SUPER - apparently a GUI front-end
for using PGP (written with LXB).


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 21:34:18 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Meyer <bmeyer@UNION-TEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Meyer <bmeyer@UNION-TEL.COM>
Subject:      DJ340 Serial Printing
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Yes, I know the HP DJ340 will print with an IR adaptor.

I want to print serially from the HP LX/Omnibook and occasional field
testing with other computers. I have the Mac adaptor for the DJ340. I
have the necessary connectors to make an 8-pin DIN to female DB9 for
connection to a serial port.

I think I know how to wire the connectors. Has anyone made such an
adaptor and how did you wire the adaptor between going between a
standard serial port and Mac adaptor. Yes, I know one is RS232 and the
other is RS422, but it should work!

Bob
--
+--------------------+-----------------+
|Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
|bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
|Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
+--------------------+-----------------+
|   http://w3.union-tel.com/~bmeyer/   |
+--------------------------------------+

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 22:59:36 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: IRC/LX + ICQ? (could a dasoft programer coment this?)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Sat, 20 Nov 1999 08:35:43 -0500, Lars Hedstroem <nxw988e@TNINET.SE> =
wrote:

> Have you tried to chat with micq with your LX?If yes how did it worked?

I use it all the time and it works great!

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 22:20:17 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Crystal upgrade (Was: WWW/LX Update?)
In-Reply-To:  <HPLX-L%99112012232666@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 20 Nov 1999, Mike Wagstaff wrote:

> Perhaps if the Morphy One is a success (and we beg them long and hard
> enough!), then D&A might consider programming a new browser with
> frames capability. The resolution shouldn't be a problem - there's
> always scroll bars - and the 486/32MB combination would supply more
> than adequate speed and memory. Unfortunately, this is all very
> hypothetical at the moment...

Or you could run Win95 on the Morphy One and use Internet Explorer, if you
like to hurt yourself.  <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 20 Nov 1999 22:42:11 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Crystal upgrade (Was: WWW/LX Update?)
In-Reply-To:  <199911202047.MAA30508@ftel.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sat, 20 Nov 1999, A Meshar wrote:

> Also, the painting of multiple Webdocuments all at once on the screen
> is beyond the memory requirements of the palmtop and chip.

I believe with EMS the memory requirement could be solved, but it would
definitely be slow, loading and displaying multiple frames at once.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 03:01:53 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      WWW/LX PLUS
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Heeeeyyyyyyy! :-))


I just tried to delete mails in the Plus demo,really nice that you don't=
 have to close the system manager to do it.

This is really a pain in the --- in WWW/LX 1.1!

Worth $84 only this,I think!

Lars Hedstroem/Sweden

PS:Martin,if you read this,what do you think of my new signature?

      "Gi blaffen i reglene , bruk fornuften!"

                           Franklin Eekhout

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 03:01:55 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: IRC/LX + ICQ? (could a dasoft programer coment this?)
Comments: To: Jeff Johns <jeffj@SCOTT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

 Jeff Johns <jeffj@SCOTT.NET>


wrote:


"> Have you tried to chat with micq with your LX?If yes how did
it worked?

I use it all the time and it works great!"


Nice!You will then soon find me out there:-))


Lars Hedstroem/Sweden


      "Gi blaffen i reglene , bruk fornuften! "

                           Franklin Eekhout

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 09:05:41 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: Can't get HV to show sites
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Russ,

> > > So... what didn't I setup correctly?
> >
> > Who is your ISP provider?
>
> IBM.NET (which is now AT&T).
>
> I'm doing email and news groups with WWW/LX just fine; it's only
> HV that is giving me problems.

You may try different nodes to dial in, but this will be expensiv.

I would suggest to contact AT&T tech support. You may also have look at
the newsgroup attglobal.general.

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 00:07:32 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Crystal upgrade (Was: WWW/LX Update?)
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

David Sargeant <david@HPLX.NET> wrote,

> > Also, the painting of multiple Webdocuments all at once on the screen
> > is beyond the memory requirements of the palmtop and chip.
>
>
> I believe with EMS the memory requirement could be solved, but
> it would definitely be slow, loading and displaying multiple
> frames at once.

You think so? I think it would be wonderful if someone
developed an HTML Viewer that could do all the stuff that
Netscape or MSIE can do AND run on the Palmtop. I am going to
be in line to buy it :-) Good luck to whoever is doing it.

(Didn't we have that discussion before? We never heard from
Ian since - is he busy on the project?)

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 04:49:33 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: IRC/LX + ICQ? (could a dasoft programer coment this?)
Comments: To: Tomas Moberg <Tomas.Moberg@ABC.SE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tomas wrote:


"I have used MICQ to chat. Almost daily.
It works very well.
I have managed to strip it down to 120Kbytes.
Thanks to "Compack" (found on super). That program realy have
saved me some disk space."


And if you don't strip it,how big is it then?


Lars Hedstroem/Sweden

      "Gi blaffen i reglene , bruk fornuften!"

                         Franklin Eekhout

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 10:56:47 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              chris@AMLOG.DEMON.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Randle <chris@AMLOG.DEMON.CO.UK>
Subject:      FLUFF: A New Handheld
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="__next_part__1295400226__"

--__next_part__1295400226__
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Guys,

I hope you'll excuse the fluff, but my wife, Jana, has
produced a new handheld! We're calling her Julia. Actually she
takes two hands to hold, and she's a tad heavy at 3.85 Kg (8.5
lbs). Probably due to the hefty built-in soundcard.

It was a reassuring feeling (for me anyway) that nearly
everything that Jana was plugged in to had (hp) stamped on
it. When I mentioned it to her, she just looked to the heavens
with that exasperated look she reserves for all boys toys.
--__next_part__1295400226__
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit


Chris Randle (chris@amlog.demon.co.uk)



--__next_part__1295400226__--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 00:57:17 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paul Johnson <paulj@SILCHIP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paul Johnson <paulj@SILCHIP.COM.AU>
Subject:      Re: Tide Program
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I found the following info in my notes from the mailing list:
> -Nautical Software has a program called Tides & Currents for  DOS that works
> well on the HP200LX.  It includes Moon Data,  Daily Highs and Lows for
> specific locations as well as Average Tides.
> http://www.tides.com/
> -There is an older dos program that works on the HP LX.  It is somewhat slow
> and I don't remember where
> I got it but it is called Tides V3.09 .
> They have a very nice graphical software that works on the HP.
> -You could do a lot worse than download tide24.zip from
> http://vancouver-webpages.com/peter/index.html   (a splendid collection
> of shareware and freeware for boat owners and GPS enthusiasts)
> This has pretty good global coverage of tidal harmonic constants and
> works just fine on my 200LX (it's a bit slow on a single speed unit,
> but then it is doing a lot of number crunching).   The graphical
> output fits the screen nicely too.
> If you want to estimate currents as well as heights you could look at
> the tides303, 304 etc... series on the same site but the displays aren't
> as good on the palmtop.
>

I had a look at www.tides.com , they didn't mention a DOS version of
their software. I've sent an email asking if they sell a DOS version.

http://vancouver-webpages.com/peter/index.html was great, theres heaps
of info there.

Paul Johnson

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 13:45:52 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Reinhard Mueller <molitor@01019FREENET.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Reinhard Mueller <molitor@01019FREENET.DE>
Subject:      ser.-pll. Converter
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

hi german list members,

Can one of you give a recommendation for a serial/parallel
converter which - of course - works well with the hplx, is
affordable and available in germany. I have no idea about how
large or small those devices are, but of course it should be not
too large, too.

Or has anyone a used converter for sale?

Servus,
Reinhard



Goin' Postal - HP 100/200LX (v3.08) REGISTERED

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 10:14:28 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Mberri01@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Michael Berrier <Mberri01@AOL.COM>
Subject:      Re: FLUFF: A New Handheld
Comments: To: chris@amlog.demon.co.uk
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Hi,


???????????

rgds, Michael

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 10:44:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jim Saklad <jimdoc@INAME.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jim Saklad <jimdoc@INAME.COM>
Subject:      Re: FLUFF: A New Handheld
Comments: To: chris@AMLOG.DEMON.CO.UK
In-Reply-To:  <E11pUfn-0000c6-0C@finch-post-12.mail.demon.net>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii" ; format="flowed"

Chris -

>I hope you'll excuse the fluff, but my wife, Jana, has
>produced a new handheld! We're calling her Julia. Actually she
>takes two hands to hold, and she's a tad heavy at 3.85 Kg (8.5
>lbs). Probably due to the hefty built-in soundcard.

What is the model number ? <g>

--
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Jim Saklad                                      mailto:jimdoc@iname.com
  2nd generation anesthesiologist                          Borzoi breeder
              For PGP public key, finger -l jsaklad@qis.net

    Nothing is often a good thing to do and always a clever thing to say.
                                                 -- Will Durant

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 10:04:16 +0000
Reply-To:     owen6511@home.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
Comments:     Authenticated sender is <owen6511@mail.rdc1.il.home.com>
From:         Terry Owen <sandstar@TECHNOLOGIST.COM>
Subject:      Re: FLUFF: A New Handheld
Comments: To: Chris Randle <chris@AMLOG.DEMON.CO.UK>
In-Reply-To:  <E11pUfn-0000c6-0C@finch-post-12.mail.demon.net>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Congratulations!  Babies are the best toys. <g> (This from a mother of
4 and soon-to-be new grandma.)

Terry


On 21 Nov 99 at 10:56, Chris Randle wrote:

> Hi Guys,
>
> I hope you'll excuse the fluff, but my wife, Jana, has
> produced a new handheld! We're calling her Julia. Actually she
> takes two hands to hold, and she's a tad heavy at 3.85 Kg (8.5
> lbs). Probably due to the hefty built-in soundcard.
>
> It was a reassuring feeling (for me anyway) that nearly
> everything that Jana was plugged in to had (hp) stamped on
> it. When I mentioned it to her, she just looked to the heavens
> with that exasperated look she reserves for all boys toys.
=-=-=- owen6511@home.com -=-=-=

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 17:51:54 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      my computer and internet
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

hi list friends

if you get error messages from my server like:


From: Mail Delivery Service <postmaster@wanadoo.fr>
To: <hobchi@juno.com>
Subject: Delivery Status Notification
Date: 19 Nov 1999 21:42:11 +0100
Message-ID: <3835b6233843481c@apeiba.wanadoo.fr>

This is a MIME-encapsulated Delivery Status Notification message.
This message is automatically generated by a SMTP mail server to inform
you
about the delivery status of your message. The exact specification of the
format
of these notifications can be found in RFC1891, RFC1892, RFC1893 and
RFC1894.

..............it means that i still haven't won the war with

1. Bill Gates for putting mal-functional win98 on dos7
2. AOL for stuffing up my pilot
3. the virus writers (who hate Bill and make money for Mac "Affe"
4. Wanadoo for charging too much for outdated technology

so, don't give up, send it again - I ALWAYS REPLY TO MAIL FROM YOU unless
it's boring or offensive ;))

Nathalie

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 17:53:38 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: WWW/LX Update??
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

"JAVA was developed as a programming language that could
run almost anywhere (it was actually designed to run appliances like
toasters and microwaves)."
http://www.cognos.com/cognews/winter98/java.html

"Java is the buzzword of the moment on the Internet. Initially developed
by Sun Microsystems as a programming language for consumer
electronics such as toasters and microwaves, it has evolved into a
highly powerful language for the Web."
http://www.atlas.net.uk/S_Patlas-net/glossary.html

"Java began in 1990 as a chip independent programming language
for use in toasters, microwave ovens and other electrical appliances."
http://www.cs.monash.edu.au/~aland/notes/CSC3252lect19.html

"Originally, Java (or Oak as it was called then) was conceived by a
team at Sun as an architecture-independent, robust, small programming
language that could be embedded in consumer electronics as diverse
as toasters to PDAs
http://www.epcc.ed.ac.uk/epcc-tec/SSP/96/neil/node9.html

"In 1990 a small team at Sun began designing a new programming
language that could be used for consumer electronics software
(toasters, microwaves, etc..). This language that eventually became Java,
was small reliable, and platform-independent. In 1993, as the Java team
continued to work on the design of the new language, the World Wide
Web appeared on the Internet. The Java developers realized that an
architecture-neutral language like Java would be ideal for programming
on the Internet, because a program could run on all of the different types
of computers connected to the Internet. In fact, all of the design goals of
Java made it ideally suited for Internet programming.
http://www.physics.uoguelph.ca/summer/report/java.html

Greetings
-goe-

-----Original Message-----
From: A Meshar <sponsor@FTEL.NET>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Samstag, 20. November 1999 21:02
Subject: Re: WWW/LX Update??


>> I doubt you will see Java support as that would mean running a Java VM un
der
>> an 8 or 16mhz 80186 which would probably crawl at an unexceptable rate.
>> Frames
>> would be cool though :)
>
>Probably you are right on this assessment.
>
>  Avi M. D&A

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 09:33:51 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, lfast@NATIVELAW.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lawrence Fast <lfast@NATIVELAW.COM>
Subject:      Lotus Notes
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii

Has anyone been able to sync the HP built-in apps (or any other PIM
programme that runs on the 200LX) with Lotus Notes?  I have used my 200LX
happily since it first came out but unless I can sync with Lotus Notes I
will have to switch to a CE machine.   Any help with this problem would be
most gratefully received.

Thanks,

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 10:13:02 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Terrence Chun <tchun@UCLA.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Terrence Chun <tchun@UCLA.EDU>
Subject:      LXDR
MIME-Version: 1.0
Content-Type: text/plain

Has anyone had any problems using LXDR0.99b?  It crashes my 6meg DS 200lx
when I start it.

I download my mail to my desktop, where I usually respond to all of my
messages (eventually).  When I am going to be away for awhile, I'd like to
be able to download the messages to the 200lx where I could type out my
replies using PE or VDE or Memo or something in my moments of "down-time".
 Then, I'd like to transfer them back to my desktop to be uploaded to my
popserver (and thus keep a copy of the reply on my desktop "archive").  I
thought that LXDR would be able to read the exported mail (which just
concatenates the total pure messages into one long file).

I tried to use GoinPostal, but it seems more prepared to download messages
into its own folders rather than import a mailfile that already exists.

Does anyone have any suggestions?

Thanks!

-- Terry

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 13:35:07 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Re: Crystal upgrade (Was: WWW/LX Update?)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

David wrote:
> Or you could run Win95 on the Morphy One and use Internet Explorer, if =
you
> like to hurt yourself.  <g>

Surely neither Win95 nor IE will work with a CGA screen??? (I
was wrong about Win 3.1, so I might well be wrong here too!).
The best bet, as far as I can see, for a good Morphy One
browser looks to be Arachne.

 -Mike

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 12:58:25 -0600
Reply-To:     Mack Baggette <mack@times2tech.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mack Baggette <mack@TIMES2TECH.COM>
Organization: Times2 Tech
Subject:      Re2: Crystal upgrade (Was: WWW/LX Update?)
In-Reply-To:  <HPLX-L%99112113350730@UCONNVM.UCONN.EDU>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> Surely neither Win95 nor IE will work with a CGA screen??? (I
> was wrong about Win 3.1, so I might well be wrong here too!).
> The best bet, as far as I can see, for a good Morphy One
> browser looks to be Arachne.

I don't believe this to be the case.  Any operating system can be made to
run on a CGA screen with the right virtual VGA screen driver.  Of course it
means having to scroll the screen to see everything, but it is definately
possible.  This most likely means that a custom driver will have to be
built.

Cheers,
 Mack                            mailto:mack@times2tech.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 20:21:10 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      Re: IR PRINTING FROM WORD AND CGAHLP.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Stefan,

thanks for the tip. I read through the LXPRO manual and
discovered some very useful features I had not assimilated
("Ronald Reagan appraoch to reading..."). However, as for the
'.' to suppress/diminish shades of grey, the LXPRO window does
not come up in WORD.

Regards
Winfried

>Winfried Zettelmeyer wrote:
>
>> Is there another TSR or Pgm that suppresses the shades of grey
>> and is compatible with IR printing ? LXSTAT offers a variety
>> of display modes, but none of the does the thing.
>
>you could try LXPRO. If you press '.' while in it's opening
>screen, shades of gray become more readable. IR printing is
>not affected.
>
>Stefan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 20:21:16 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      Re: IR PRINTING FROM WORD AND CGAHLP.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Dear F.,

It is WORD 5.5 from which I want to print.
It IR-prints allright without cgahlp.com -dmono.dat, using
irjeteye.com and powering and rerouting the ports.

I think installing Word for a mono screen would be the right
thing. Can you tell me what kind of "switch" to use ?

Thanks
Winfried

>> The Word menu on the palmtop can be read more easily if the
>> grey shades are suppressed. This can successfully be done
>> with
>>
>> cgahlp.com -dmono.dat
>
>Can't you install Word for a mono or lcd screen?  Are you talking about
>MS Word 5.0 or 5.5?
>
>And does it print to IR if you don't use cgahlp?
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 14:46:53 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: my computer and internet
In-Reply-To:  <003d01bf3440$f9b679a0$628bfcc1@oemcomputer> from "Nathalie
              Bugeaud" at Nov 21, 99 05:51:54 pm
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

What you copied in your message seems like a standard receipt
confirmation.  Some folks request delivery of a receipt confirmation
with their e-mails, and I know just as many other people that disable
receipt confirmation in their e-mail reader.  Sounds like your friends
who get this message must have request receipt confirmation feature
turned on.  That's my guess.

I'm not sure why you would want someone to re-send their message
upon getting this receipt notification message - unless you've
experienced that such messages actually aren't getting to you, and
the receipt confirmation is coming from somewhere else in your
ISP's system.

-Chris


--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 12:46:15 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: FLUFF: A New Handheld
Comments: To: chris@AMLOG.DEMON.CO.UK
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Hi Guys,
>
> I hope you'll excuse the fluff, but my wife, Jana, has
> produced a new handheld! We're calling her Julia. Actually she

Congratulations!!!

> takes two hands to hold, and she's a tad heavy at 3.85 Kg (8.5
> lbs). Probably due to the hefty built-in soundcard.

ROFL!!!

> It was a reassuring feeling (for me anyway) that nearly
> everything that Jana was plugged in to had (hp) stamped on
> it. When I mentioned it to her, she just looked to the heavens
> with that exasperated look she reserves for all boys toys.

She is right, you know! When are you buying Julia's palmtop?
:)

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 16:13:17 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Clark Gaylord <gaylord@GAYLORD.ASYNC.VT.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Clark Gaylord <gaylord@GAYLORD.ASYNC.VT.EDU>
Subject:      Scott!s flash disks

> Date:    Sat, 20 Nov 1999 09:53:18 -0800
> From:    smoore <smoore@EFFECTNET.COM>
> Subject: Hello! Lars! PCMCIA Disks
>
> Lars, I want you to know that I have sold many disks on this site all
> over the world and I have honestly only had one complaint for that
> individual. I told him I would replace the disk and I have been sending
> all my disks in padded envelopes and wrapped ever since. Sorry for you

I bought one of Scott!'s disks and it has worked fine.  I've been
using it non-stop in my 200LX for about a month or two.

Just so you know.

Clark

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 21:22:16 +0930
Reply-To:     rwhitby@asc.corp.mot.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rod Whitby <rwhitby@ASC.CORP.MOT.COM>
Subject:      Re: filer backup

David Becher writes:
> The problem that I have found with incremental backups is that they are additive
> only. If you delete a file from your palmtop it is not deleted from your
> backup, so the backup grows and grows in size....
>
> What I have been working on over the last couple of weeks is a batch file which
> will incrementally backup my palmtop in such a way that the backup is an IMAGE
> of what is on my palmtop with no extraneous information.
>
> Does anyone have other solutions to this problem

Yep, if you've got an ethernet card and run LXTCP, then use
LXTELNET on the palmtop (so that it acts as an FTP server),
and then run the "mirror" perl program from a Linux box.  It
will mirror the contents of the palmtop (only transferring
new or changed files, and removing any files that have been
deleted).  I use this exclusively for my backups - I average
about 150Kb/sec over ethernet.


-- Rod Whitby - rwhitby@hplx.net - http://rwhitby.hplx.net --

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 20:29:24 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Re: Re2: Crystal upgrade (Was: WWW/LX Update?)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mack wrote:
> I don't believe this to be the case.  Any operating system can be made =
to
> run on a CGA screen with the right virtual VGA screen driver.  Of =
course it
> means having to scroll the screen to see everything, but it is definatel=
y
> possible.  This most likely means that a custom driver will have to be
> built.

Wow! I never imagined that was possible... But how much work
would such a "custom driver" involve? Would the development
of such a driver to run Win95, for example, be a trivial or
non-trivial task?

 -Mike http://games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 19:34:18 -0600
Reply-To:     Mack Baggette <mack@times2tech.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mack Baggette <mack@TIMES2TECH.COM>
Organization: Times2 Tech
Subject:      Re4: Crystal upgrade (Was: WWW/LX Update?)
In-Reply-To:  <HPLX-L%99112120292581@UCONNVM.UCONN.EDU>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> Wow! I never imagined that was possible... But how much work
> would such a "custom driver" involve? Would the development
> of such a driver to run Win95, for example, be a trivial or
> non-trivial task?

I am not sure how much work it is, but maybe Rick Kozak can answer that
question better than I can anyway.

Cheers,
 Mack                            mailto:mack@times2tech.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 18:36:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: FLUFF: A New Handheld
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sun, 21 Nov 1999 20:42:44 -0500 (EST)

CONGRATULATIONS CHRIS!  8-)


Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 20:32:43 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      Re: Requesting DB Help! (somewhat long)
Comments: To: "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
In-Reply-To:  <199BBAE6DAABD2118CC90090272A7C4C310C8F@n3cdoimmail140m.army.mil>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Raymond, Timothy CPT--13CPAO wrote:
>It encounters a "Possible error" when it finds one more record than it
>expected to find... For example:
>
>  "984 records expected, 985, found (could be due to FASTDB.TSR)".

>Are these critical errors, or are they about to cause me to have a date-dump
>(db crash of some sort)?

Please get the latest version of DBCHECK to see if it shows the same
errors. It's available at http://members.aol.com/DominoPage/. I've
figured out the number of records/expected records part.

Also, at least one previous version might report false errors when
you're checking more than one file at a time.

--
Curtis Cameron
WGS-84 N33.033 W96.724

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 03:02:55 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: IR PRINTING FROM WORD AND CGAHLP.COM
Comments: To: Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> It is WORD 5.5 from which I want to print.
> It IR-prints allright without cgahlp.com -dmono.dat, using
> irjeteye.com and powering and rerouting the ports.
>
> I think installing Word for a mono screen would be the right
> thing. Can you tell me what kind of "switch" to use ?

I used the Setup program to create a monochrome screen driver or video
file.  I recall reading somewhere in running something, there was also a
lcd setting?????

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 17:40:39 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: FLUFF: A New Handheld
Comments: To: chris@AMLOG.DEMON.CO.UK
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Think how proud you'll be when she produces her first
output! Congratulations!

PS: At least you didn't turn her over to check the serial
number to determine ease of mamory upgrade! ;)

Ken
khansen@njcc.com

-----Original Message-----
From: Chris Randle <chris@AMLOG.DEMON.CO.UK>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Sunday, November 21, 1999 5:57 AM
Subject: FLUFF: A New Handheld


>Hi Guys,
>
>I hope you'll excuse the fluff, but my wife, Jana, has
>produced a new handheld! We're calling her Julia. Actually she
>takes two hands to hold, and she's a tad heavy at 3.85 Kg (8.5
>lbs). Probably due to the hefty built-in soundcard.
>
>It was a reassuring feeling (for me anyway) that nearly
>everything that Jana was plugged in to had (hp) stamped on
>it. When I mentioned it to her, she just looked to the heavens
>with that exasperated look she reserves for all boys toys.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 20:05:13 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: Lotus Notes
Comments: To: lfast@NATIVELAW.COM
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Well, if your company is SOL (Stuck On Lotus) then you
also are SOL (**** Outta Luck) - I am aware of no DOS
Lotus Notes Clients...

You *may* be able to use an IMAP mail client, if one exists
for DOS, but I am out of my depth here...

HTH,

Ken
khansen@njcc.com

-----Original Message-----
From: Lawrence Fast <lfast@NATIVELAW.COM>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Sunday, November 21, 1999 12:43 PM
Subject: Lotus Notes


>Has anyone been able to sync the HP built-in apps (or any other PIM
>programme that runs on the 200LX) with Lotus Notes?  I have used my 200LX
>happily since it first came out but unless I can sync with Lotus Notes I
>will have to switch to a CE machine.   Any help with this problem would be
>most gratefully received.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 21:10:25 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Curtis Cameron <curtc@AIRMAIL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Curtis Cameron <curtc@AIRMAIL.NET>
Organization: None
Subject:      Re: Requesting DB Help! (somewhat long)
Comments: To: "Raymond, Timothy CPT--13CPAO" <RAYMONDT@HOOD-EMH3.ARMY.MIL>
In-Reply-To:  <199BBAE6DAABD2118CC90090272A7C4C310C8F@n3cdoimmail140m.army.mil>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Oops, wrong page. It's

http://cameron.hplx.net

or

http://members.aol.com/freewhL44/lxgames.html

-Curtis Cameron

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 22:38:58 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Takeshi Ochi <tochi01@IBM.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Takeshi Ochi <tochi01@IBM.NET>
Subject:      WWW/LX Browsing Problem
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-2022-jp
Content-Transfer-Encoding: 7bit

Hello, everyone.

I am trying to browse the web using registered version of WWW/LX. It
connects fine at the speed of 19200, but I when I try to open the web
 page, HV opens a blank page after the message "Receiving data...".
However, if I set the baud speed to 1200, it sometimes retrieve data
correctly and opens the web page.
I tried "Slowmodem" option in www.cfg but situation does not change.

On the other hand, I have no problem getting and sending email
using Post/LX.

I use 4MB 200LX (normal) and Megaherz XJ1144. The ISP is AT&T
(former IBM). Does anyone has any ideas to fix the problem?
Please let me know.

Thanks,

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 23:03:45 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      Ethernet EMS
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Can Drives over an ethernet connection be used for EMS?
I don't exactly know a practical use for this, but could it be done?

Darren.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 21:59:49 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Lotus Notes
In-Reply-To:  <000601bf3497$9f934c80$f302e0c7@L110>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sun, 21 Nov 1999, Ken Hansen wrote:

> You *may* be able to use an IMAP mail client, if one exists for DOS,
> but I am out of my depth here...

The new version of LXTCP, which may not have been released yet, does
include IMAP support.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 22:54:07 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: Ethernet EMS
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

It could probably be *done*, but seems to me it'd be easier to get a
20Mb PC110 (or whatever) and use it, instead of "begging for trouble"
like that <G>  It'd be easier to do EMS off a local SRAM card, I imagine
(Probably THAT's already written <G>)

  Mark

Darren Frick wrote:
>
> Can Drives over an ethernet connection be used for EMS?
> I don't exactly know a practical use for this, but could it be done?
>
> Darren.

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 07:58:11 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: WWW/LX Browsing Problem
Comments: To: Takeshi Ochi <tochi01@IBM.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Takeshi,

> I am trying to browse the web using registered version of WWW/LX. It
> connects fine at the speed of 19200, but I when I try to open the web
>  page, HV opens a blank page after the message "Receiving data...".
> However, if I set the baud speed to 1200, it sometimes retrieve data
> correctly and opens the web page.
> I tried "Slowmodem" option in www.cfg but situation does not change.

Please check with AT&T or IBM tech support. Also have a look at the
news group attglobal.general.

Also you may try a different node (e.g. Seattle, Munich) where you =
dailin.

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 21 Nov 1999 23:43:45 -0800
Reply-To:     patrickwest@uswest.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Lotus 1-2-3 on Ebay
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Folks,

Anyone know if this could be made to work under Linux?


>Lotus 1-2-3 Sun "Server Edition"
>Version 1.0
>This version gives you all the functionality of 1-2-3 Release 3, plus
>new features designed to take advantage of the Sun system.
>System Requirements: SunOS 4.0 and higher. 4MB RAM; not less
>than 12MB hard disk if all three versions installed.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 03:07:32 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      Re: WWW/LX Browsing Problem
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon, 22 Nov 1999 07:47:51 +0000 (GMT)

03h42m50s ago ...
On Sun, 21 Nov 1999 20:05:01 -0800 (PST), Takeshi Ochi wrote:

> HV opens a blank page after the message "Receiving data...".

This is a problem reported with all WWW browsers and certain Attglobal
dial-in nodes at the moment. In fact, for the past month or so. Only
sure solution is to dial-up a non-attglobal ISP :( Hopefully they fix
it soon - seems to be diagnosed as a problem "deploying the cache".

Tony

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 09:12:55 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Re: IRC/LX + ICQ? (could a dasoft programer coment this?)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Thanks to "Compack" (found on super). That program realy have
> saved me some disk space."

> And if you don't strip it,how big is it then?

I honestly dont remember. But I remember that I was quite pleased after
compackting and deleting files. It could have been 400k or something
reduced to 100k

>       "Gi blaffen i reglene , bruk fornuften!"

hvergang!


      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 09:20:15 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Other DOS Version on HP 200 LX
Comments: To: Chris Lott <rclott@MAIL.HIWAAY.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Chris,

> permanent.  Has anyone looked into yet another upgrade option for
> replacing the ROM with a FLASH chip?  I don't know the mechanical
> arrangement of the internal ROM on my HP, but the FLASH-ROM chips
> are getting pretty small.

AFAIK, the ROM is built into the Hornet chip. So we cannot change it.

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 09:20:27 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: FLUFF: A New Handheld
Comments: To: chris@AMLOG.DEMON.CO.UK
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I hope you'll excuse the fluff, but my wife, Jana, has
> produced a new handheld! We're calling her Julia. Actually she

:-)

CONGRATULATIONS!

|-O    <--- (crying handheld)

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 09:20:29 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: ser.-pll. Converter
Comments: To: Reinhard Mueller <molitor@01019FREENET.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Reinhard,

> Can one of you give a recommendation for a serial/parallel
> converter which - of course - works well with the hplx, is
> affordable and available in germany. I have no idea about how
> large or small those devices are, but of course it should be not
> too large, too.

I use a s-p converter that I bought at Segor Electronic (Berlin) for
abt 90 DM (if I remember right). It works very well.
It's only the adapter (25DB female on
the one side and Centronics plug on the other side).
Has 10 dip switches for configuring (baud rate up to 115200, flow
control, parity, data bits) and an additional power source jack (9V -
only needed if you use a very long serial cable or a serial port that
supplies not much mower - I don't need it for HPLX <--> Canon BJC
4100).

Its name is CVTSP2.
You can contact Segor at +49 30 3449794
or you can call me. I'll probably go to Segor today and buy a few
things, so I could buy such a converter for you and send it to you
(Segor takes abt 12 DM for shipping!)
If you decide to call me, my telephone number is 0177/7955549.

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 19:51:49 +1030
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rod Whitby <rwhitby@ASC.CORP.MOT.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rod Whitby <rwhitby@ASC.CORP.MOT.COM>
Subject:      LXTCP 1.2 beta 8 released (LXMTA with IMAP support added)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Folks,

I've uploaded version 1.2 beta 8 of LXTCP to my web site beta software
area.

If you're a current LXTCP user, then please read the LXTCP.DOC file,
cause the name of the config file has changed from LXTCP.CFG to
TCP.CFG (which is now the name that WatTCP in general uses instead of
WATTCP.CFG).

This version has better IMAP support, and now uses the latest WatTCP
library (which has just been released after lots of improvements by
Erick, Steve Lawson, myself and others).

I now personally use IMAP instead of POP when on the road, cause it
lets me leave all the messages on the server, but allows me to
download a copy of only those messages that I haven't seen yet.  The
server keeps track of which messages have been downloaded
(irrespective of where you download them from) and then when I get
back to my home base I've still got all the messages there, but the
server knows that I've already seen most of them and therefore only
presents the new ones to me.

--
-- Rod Whitby, Snr Staff Engr, Electronic Design Automation --
-- Motorola Australia Software Centre - Adelaide, Australia --
-- Phone: +61 8 8203 3526, Fax: +61 8 8203 3501, <GMT+9:30> --
-- Personal: rwhitby@hplx.net <URL:http://rwhitby.hplx.net> --

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 11:27:57 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      123 on my laptop 286? Where to download?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

I have mailed all my Hplx`s away.. (David yours is on the way..)

My Hp200 is in the mail to Thaddeus for a upgrade therefore:

I have moved all my notebook and databases to a 286 Texas Instruments
laptop I have until I get my Hplx back from a upgrade. Its _less_
portable, but it helps when my hplx is away..

I also runs www/lx on it so the only thing I really miss is
appointmentbook and 123 Lotus.

For the Appointmentbook there is no solution..(I do not have Cpack)

But I would like a copy of 123 Lotus that works on my 286 and reads the
123 Lotus files from the Hp.

Does anyone have a site where I can download a version of 123 Lotus? I
have a licence don`t I since its in the Hplx?

TIA

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 06:07:03 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: IRC/LX + ICQ? (could a dasoft programer coment this?)
Comments: To: Tomas Moberg <Tomas.Moberg@ABC.SE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thomas wrote:


"I honestly dont remember. But I remember that I was quite
pleased after
compackting and deleting files. It could have been 400k or
something
reduced to 100k"


OK,but could you chat on all chatplaces or is here a limitation here?=


I would very much like to try it,perhaps we can chat together this week?


"hvergang!"


So you drink danish beer :-)



Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 06:07:10 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Java- and Javascripts questions
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hello!

I have some Javaquestions.


I have never believed that Java would be possible to manage with the=
 LX due to its interactivity with the web,i.e. these small programs=
 called applets which pop into your RAM memory  when connecting to such=
 a sajt and where they are ran, performing different tasks,quite heavy=
 if you give it a second thought,even if it is not so heavy for us LX=
 users.
But concerning Javascript I thought there perhaps was a chance.


But Avi said here in another email that not either the Java script would=
 be possible,it would,and I am quoting:

"To run the latter twoJava and Javascript, you need a lot of
processing power and that is not available on the palmtop.
Also, it requires fairly large code sets and that is also not
possible on the 80186 chip."


But surely,doesn't Javascript  takes less processing power than Java?Even=
 if its code sets are not possible on the 80186 chip,as Avi mentioned?


Question 2:Stephan Goeldi mentioned an alternative to Java,and I quote=
 him too:

" Serverside Java (so-called servlets) produce HTML
code that is LX-readable."


But if you strip off the interactivity with the web,which I take it=
 must be made if it will be LX-readable,what is then left of the site?Is=
 it useable at all or only a meaningless page?


Lars Hedstroem/Sweden

PS:To Goeldi if you read this:I had heard of Java on dishwashers but=
 not on toasters,didn't even know that toasters with  microprocessors=
 existed.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 06:11:39 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Soper <ssoper@PROBOLINGGO.WASANTARA.NET.ID>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Soper <ssoper@PROBOLINGGO.WASANTARA.NET.ID>
Subject:      Tide Program
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

There was a question about good tide programs that work with the
HP-200LX.  (I can't reply to it, because I can't break the digest
apart, although I'm working on alternatives).

I use a program called "Tides" (version 4.04).  I first heard about it
on the Sailing Forum of CompuServe.  I tried to download it from the
forum, but i never could - I eventually had to contact the author
directly:

Edward P Wallner <epwallnr@world.std.com> | Author of Tides Program

It was good I did because he also sent me the tidal stations for areas
close to where I live and work (Surabaya, Indonesia and Phuket,
Thailand).  The program is well written and is easy to use.  It can
give yo the normal highs and lows, search for extremes, plot the tides,
give you the the highs and lows on a certain date.

Hope that helps,
Steve Soper

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 10:52:09 -0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Brown, William" <wdlb5359@GLAXOWELLCOME.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Brown, William" <wdlb5359@GLAXOWELLCOME.CO.UK>
Subject:      Re: Outlook / HPLX Converter Version 2.15 available
MIME-Version: 1.0
Content-Type: text/plain

Don't give up trying to move appointments Outlook-> LX.  I might make more meetings that I'm meant to go to.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 06:04:31 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Keefe <emkeefe@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Keefe <emkeefe@USWEST.NET>
Subject:      Re: 123 on my laptop 286? Where to download?
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

You have a license for running 123 on the Palmtop.

I was going to suggest going to www.triusinc.com (or is it
trius.com?) and get a copy of AseasyAs 5.70d (DOS). It will
be able to read .wk1 files. However, AsEasyAs 5.70 may
require a '386 or better. You may be able to find earlier
versions of AEA on the internet elsewhere. If that fails,
try ALITE on the SUPER site.
.ed.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 13:20:30 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: ser.-pll. Converter
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>I use a s-p converter that I bought at Segor Electronic (Berlin) for
>abt 90 DM (if I remember right). It works very well.
...
>for HPLX <--> Canon BJC 4100


So you print to the BJC4100. What mode does your printer? BJ
or Epson? I know that the Canon BJ's work in Epson mode and
in BJ (is IBM Proprinter too) mode. I use Canon BJ's since the
BJ-10e (later BJ-20, BJ-200, BJC-600e, BJC-620 and now the
BJC-6000). I think the BJC-6000 does only Windoze. But I already
have my BJ-10e and the BJC-620. I had problems in printing
extended characters like the umlauts from the LX. How does the
BJC-4100 do that?

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 13:24:37 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Lotus Notes
Comments: cc: Aurel Schwarzentruber <zed@pidas.ch>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Our Lotus administrator told me, that one of the earliest Notes
versions was a DOS client. But its functionality was poor, and
it didn't do more than a BBS etc. He doesn't think, that it loads
NSF's.

-goe-

-----Original Message-----
From: Ken Hansen <khansen@NJCC.COM>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Montag, 22. November 1999 04:13
Subject: Re: Lotus Notes


>Well, if your company is SOL (Stuck On Lotus) then you
>also are SOL (**** Outta Luck) - I am aware of no DOS
>Lotus Notes Clients...
>
>You *may* be able to use an IMAP mail client, if one exists
>for DOS, but I am out of my depth here...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 13:37:09 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Java- and Javascripts questions
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>But surely,doesn't Javascript  takes less processing power than Java?

*** 1. Java sucks

*** 2. JavaScript sucks too.

*** 3. Java and JavaScript have nothing in common
Java runs in a virtual machine on the client (usual Java) or on the server
(server-side Java via servlets). Everything that works on the serverside,
produces standard HTML code, that is readable by the LX. So really
platform-independent code must be executable by the server, not by
the client. JavaScript is code inside of a HTML page that is executed
by the client. The client must support JavaScript. JavaScript is NOT a
www standard. It was introduced by Netscape to enable bullshit like
mouse-over effects, hopping hopping graphics and other unusable
stuff. Very very seldom you find a really practical JavaScript. e.g. to
enable pulldown menues that are produced on-the-fly depending of
the pulldown menu-entry you selected before etc.

>Question 2:Stephan Goeldi mentioned an alternative to Java,and I quote him
too:
>" Serverside Java (so-called servlets) produce HTML
>code that is LX-readable."


Everything, that is executed on the server side should be LX-readable,
because it produces HTML.

A good example for something really practical on the web is PHP.
It is really a good thing, especially if you do SQL database stuff.

Perl is IMHO the best programming language on the web. Most
CGI scripts are Perl. There is a 4.x Perl version that runs very well
on the LX (www.palmtop.net). The actual standard on the web is
Perl 5.005. But who cares, if it is processed by the webserver?

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 07:31:30 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Chris Lott <rclott@MAIL.HIWAAY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Lott <rclott@MAIL.HIWAAY.NET>
Subject:      Re: Other DOS Version on HP 200 LX
In-Reply-To:  <199911220920.JAA16510@linux.zrz.TU-Berlin.DE> from "Daniel
              Hertrich" at Nov 22, 99 09:20:15 am
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

> > permanent.  Has anyone looked into yet another upgrade option for
> > replacing the ROM with a FLASH chip?  I don't know the mechanical
> > arrangement of the internal ROM on my HP, but the FLASH-ROM chips
> > are getting pretty small.
>
> AFAIK, the ROM is built into the Hornet chip. So we cannot change it.

That's interesting.  This is common in my business, where we deal with
embedded processors.  I guess I didn't think about it being done in
my palmtop.  In hindsight, this shouldn't surprise me.  So replacing
the ROM becomes more complicated - easiest would be to replace the
Hornet after re-programming it.  But if we can't even find the
data sheet, I presume it is even harder to actually buy a new Hornet.
We don't know (or do we) whether the Hornet is mask-ROM or PROM,
do we?

-Chris


--

************************************************************************
R. Christopher Lott, P.E.                                  rclott@ro.com
Alpha Beta Technologies, Inc.
Huntsville, Alabama
************************************************************************

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 08:35:43 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Arvidas Bajercius <arvidas@NETSCAPE.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Arvidas Bajercius <arvidas@NETSCAPE.NET>
Subject:      Word 5.5 graphic view
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

I am unable to bring up a graphic view option in Word.
I have run makevid.exe on both my desktop (runing Win98) and the 200lx to=
 no
avail. I don't know what I am doing wrong.

Would someone be so kind and spend me a copy of their screen.vid or provi=
de
some insight into this.

Thank you,

Harv

____________________________________________________________________
Get your own FREE, personal Netscape WebMail account today at http://webm=
ail.netscape.com.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 21:02:59 +0700
Reply-To:     ripin@dnet.net.id
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ripin Pen <ripin@DNET.NET.ID>
Subject:      Re: Pocket Launcher and DOS

Don Puscher writes:
> Pocket Launcher seems like a really great program but I can't get it to start
> some of my DOS programs correctly. For example, when I try to launch SHASS it
> will start the program but doesn't see the inventory file. In 200Mnu the
> command line is
>
> &Shass=a:\bin\shass\shass.exe # a:\bin\shass
>
> The first part tells it to start the program, the second where it should look
> for data files (# is a field divider).

I had similar problems.  I solved it by creating a batch file and run the batch
file instead of the DOS file in Pocket Launcher.  The batch file would be like:
 x:   (where x, the drive of the file)
 cd\dir (where dir is the directory)
 program.exe (the program itself)

Pls try and good luck.

Regards,
Ripin
e-mail: ripin@dnet.net.id

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 10:25:00 -0500
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Java- and Javascripts questions
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Stephan Goeldi wrote:

"Java runs in a virtual machine on the client (usual Java) or on the=
 server (server-side Java via servlets). Everything that works on the=
 serverside,produces standard HTML code, that is readable by the LX.=
 So really platform-independent code must be executable by the server,=
 not by the client."

So if I understand you right,the processing when you connect to a Java=
 web site is made of your own computer,while as for serverside Java=
 the processing is made of the server, and the output is the same in=
 both cases?i.e.  html-pages which is readable by the LX.

This sounds too good to be true?

"Perl is IMHO the best programming language on the web.But who cares,=
 if it is processed by thewebserver?"

Shall I interprete your comment:"..who cares,if it is processed by the=
 webserver?" so,that there is an interest that the processing is made=
 by the client,that is by the common desktop user,instead of the server?

If so,what is this "interest" and why does  it/they have this interest?

Perhaps a naive question?

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 09:32:04 -0600
Reply-To:     Mack Baggette <mack@times2tech.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mack Baggette <mack@TIMES2TECH.COM>
Organization: Times2 Tech
Subject:      Re2: Other DOS Version on HP 200 LX
In-Reply-To:  <199911220920.JAA16510@linux.zrz.TU-Berlin.DE>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> AFAIK, the ROM is built into the Hornet chip. So we cannot change it.

The ROM is on 2 separate masked ROM chips on the palmtop motherboard and
not built into the Hornet chip.

Cheers,
 Mack                            mailto:mack@times2tech.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 07:40:19 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bryan R Leipper <nvassoc@IBM.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bryan R Leipper <nvassoc@IBM.NET>
Subject:      Re: Java- and Javascripts questions
Comments: To: Lars Hedstroem <nxw988e@TNINET.SE>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> I have never believed that Java would be possible to manage with the LX due to its interactivity with the web,i.e. these small programs called applets which pop into your RAM

JavaScript and Java are two entirely different languages.

Java is not tied to the web but has a number of features that make it
very handy for use in network environments including web applications.

JavaScript was designed as a macro language for browsers. Its name is
unfortunate IMHO.

I'd like to see a small DOS subset of Java for simple command line type
utilities. The main problem is that Java prefers a more modern operating
environment with long file names and task control. The collection of
'libraries' that are considered standard with the latest version also
tend to be rather large and to incorporate a GUI. (the extent of this
library is one of the primary benefits of Java for modern program
development, though)

Where Java on the palmtop would be useful would be as an alternative to
Perl, C, Forth, etc.

I am using Java to analyse weather data by reading current reports from
the web, parsing out the data, maintaining a simple database, and
preparing summary logs. This is all command line stuff. Another Java
utility I have reads Paradox data files - again command line only and no
network stuff at all.

I think it should be a minor problem to create an interface between Java
and the PAL library for someone who knows both very well.

Java provides a modern software development method that has shown its
capabilities for rapid development. But how to fit it into a Palmtop and
deciding what to trim is a big job. Much easier to use the imbedded
subset stuff for a particular goal rather than a general purpose subset
such as the Palmtop would need, I think.

--
Bryan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 08:07:30 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: 123 on my laptop 286? Where to download?
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Ebay has several copies of 1-2-3 DOS 2.2 and better on bid
cheap at this point.
If you stick to DOS 2.2,2.3 or 2.4 it will run fine and look
and act just like 1-2-3 on the Hplx.


Martin Bergvill wrote:
>
> I have mailed all my Hplx`s away.. (David yours is on the way..)
>
> My Hp200 is in the mail to Thaddeus for a upgrade therefore:
>
> I have moved all my notebook and databases to a 286 Texas Instruments
> laptop I have until I get my Hplx back from a upgrade. Its _less_
> portable, but it helps when my hplx is away..
>
> I also runs www/lx on it so the only thing I really miss is
> appointmentbook and 123 Lotus.
>
> For the Appointmentbook there is no solution..(I do not have Cpack)
>
> But I would like a copy of 123 Lotus that works on my 286 and reads the
> 123 Lotus files from the Hp.
>
> Does anyone have a site where I can download a version of 123 Lotus? I
> have a licence don`t I since its in the Hplx?
>
> TIA
>
> --
> Martin Bergvill Narvik, Norway
> -Palmtop friendly sig...
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 11:55:43 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Java- and Javascripts questions
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thanks for your answer Bryan off list,but what is your answer then to=
 Goeldis comment:


"Java runs in a virtual machine on the client (usual Java) or on the=
 server (server-side Java via servlets). Everything that works on the=
 serverside,produces standard HTML code, that is readable by the LX.=
 So really platform-independent code must be executable by the server,=
 not by the client."


This means that you could read Java with the LX,so what is then the=
 problem?

Lars Hedstroem/Sweden




----- forwarded message -----

JavaScript and Java are two entirely different languages.

Java is not tied to the web but has a number of features that make it
very handy for use in network environments including web applications.=


JavaScript was designed as a macro language for browsers. Its name is
unfortunate IMHO.

I'd like to see a small DOS subset of Java for simple command line type
utilities. The main problem is that Java prefers a more modern operating
environment with long file names and task control. The collection of
'libraries' that are considered standard with the latest version also
tend to be rather large and to incorporate a GUI. (the extent of this
library is one of the primary benefits of Java for modern program
development, though)

Where Java on the palmtop would be useful would be as an alternative=
 to
Perl, C, Forth, etc.

I am using Java to analyse weather data by reading current reports from
the web, parsing out the data, maintaining a simple database, and
preparing summary logs. This is all command line stuff. Another Java
utility I have reads Paradox data files - again command line only and=
 no
network stuff at all.

I think it should be a minor problem to create an interface between=
 Java
and the PAL library for someone who knows both very well.

Java provides a modern software development method that has shown its
capabilities for rapid development. But how to fit it into a Palmtop=
 and
deciding what to trim is a big job. Much easier to use the imbedded
subset stuff for a particular goal rather than a general purpose subset
such as the Palmtop would need, I think.

--
Bryan



----- end of forwarded message -----

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 11:32:39 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: HP 100LX 32MB upgrade
Comments: To: "Brian.McIlvaine@UNBOUNDED.COM" <Brian.McIlvaine@UNBOUNDED.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<I have an HP 100LX - any chance that it can be "PUMPED UP?">>

Unfortunately, no.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 17:54:31 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Please help if you can!
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

Stefan Peichl, Andreas Garzotto and me are still soldering around to
find a solution for our problem with connecting the palmtop via IR and
a mobile phone to the internet.

We still don't have an universal solution, but I think I'm just finding
one - but I need someone's help.

DO SOMEONE HERE KNOW
what that part inside the palmtop could be:
It is a SMD part, 2 contacts, abt. 1mm*2mm, color is somewhat between
brown and yellow, and a code is on its surface:
_
KA4 (the K has an overline)

is it possible that it is a diode? or a capacitor? or even a resistor?
I tried to measure its behaviour, but without success.

Thanks in advance

daniel
--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 18:59:50 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Java- and Javascripts questions
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>So if I understand you right,the processing when you
>connect to a Java web site is made of your own computer,
>while as for serverside Java the processing is made of the
>server, and the output is the same in both cases?
>i.e.  html-pages which is readable by the LX.

No. The Java applets that run on the clientside run in a
virtual machine. They can do graphic stuff there that is not
possible serverside. If the product is bigger than the applet,
then clientside Java is the solution. If the product is small
(as HTML) then serverside Java is the solution.

>Shall I interprete your comment:"..who cares,if it is processed
>by the webserver?" so,that there is an interest that the processing
>is made by the client,that is by the common desktop user,instead
>of the server?

No. Perl 5.x doesn't run on the LX. If it runs on a webserver, the LX
doesn't care if it is Perl 4 or 5. It receives only the output.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 19:12:47 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Java- and Javascripts questions
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>Where Java on the palmtop would be useful would be as an alternative to
>Perl, C, Forth, etc.

Java cannot be an alternative for these languages. As WinCE or PalmPilot
cannot be an alternative for the LX. Perhaps, if you could use a Java
interpreter or compiler WITHOUT  a virtual machine, it could be a
replacement
for Forth. But Perl and C are too powerful to call Java an alternative.

>Java provides a modern software development method that has shown its
>capabilities for rapid development.

Sounds like Windows CE ...

Well: "modern software development" means for me e.g. libraries for the
HP LX (as available for Perl). Where are the JavaLX 'libraries'?
Perl's are found on Super.

Java is an Internet buzzword, because Sun *HAS* to push it.
They have nothing else. AND there is a usability problem too:
If my Webbrowser hangs, it is always because of a Java applet.
If you have do make money with your Website, you cannot ignore that.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 19:14:15 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Java- and Javascripts questions
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>This means that you could read Java with the LX,so what is then the
problem?

No. You only receive the OUTPUT of the Java servlet.
The Output is NOT Java. It is standardcode like HTML.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 10:42:36 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Terrence Chun <tchun@UCLA.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Terrence Chun <tchun@UCLA.EDU>
Subject:      Retrofitting a Newton keyboard
MIME-Version: 1.0
Content-Type: text/plain

I am looking into the possibility of using a Newton keyboard with my DS
200lx.

I understand that Shier at one time made pre-fab keyboard kits, but I can't
find any reference to them on their website anymore.

Ebay seems to have a steady supply of them going for $40-80.  I would be
willing to make the retrofit myself, if it isn't too complicated.

How much extra equipment is required?  I'm sure that I will need to
sacrifice an HP serial connector (about $20) for the job.

Any advice of suggestions from people who have done the deed would be
greatly appreciated.

Thanks!

-- Terry

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 10:23:04 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Fryday <fryday@CALIFORNIA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Fryday <fryday@CALIFORNIA.COM>
Subject:      Re: LXTCP 1.2 beta 8 released (LXMTA with IMAP support added)
Comments: To: Rod Whitby <rwhitby@ASC.CORP.MOT.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Woohoo!! IMAP sounds great! What e-mail software should I use?

Thanks,

Philippe

----- Original Message -----
From: Rod Whitby <rwhitby@ASC.CORP.MOT.COM>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Monday, November 22, 1999 1:21 AM
Subject: LXTCP 1.2 beta 8 released (LXMTA with IMAP support added)


> Folks,
>
> I've uploaded version 1.2 beta 8 of LXTCP to my web site beta software
> area.
>
> If you're a current LXTCP user, then please read the LXTCP.DOC file,
> cause the name of the config file has changed from LXTCP.CFG to
> TCP.CFG (which is now the name that WatTCP in general uses instead of
> WATTCP.CFG).
>
> This version has better IMAP support, and now uses the latest WatTCP
> library (which has just been released after lots of improvements by
> Erick, Steve Lawson, myself and others).
>
> I now personally use IMAP instead of POP when on the road, cause it
> lets me leave all the messages on the server, but allows me to
> download a copy of only those messages that I haven't seen yet.  The
> server keeps track of which messages have been downloaded
> (irrespective of where you download them from) and then when I get
> back to my home base I've still got all the messages there, but the
> server knows that I've already seen most of them and therefore only
> presents the new ones to me.
>
> --
> -- Rod Whitby, Snr Staff Engr, Electronic Design Automation --
> -- Motorola Australia Software Centre - Adelaide, Australia --
> -- Phone: +61 8 8203 3526, Fax: +61 8 8203 3501, <GMT+9:30> --
> -- Personal: rwhitby@hplx.net <URL:http://rwhitby.hplx.net> --
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 19:56:03 +0100
Reply-To:     Paulo.Custodio@alcatel.de
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@ALCATEL.DE>
Organization: Alcatel
Subject:      PE/PIM on PALRUN
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I am running PE/PIM on a Win95 machine with PALRUN in full-screen mode.

Sometimes when I switch from PE to PIM (Ctrl-Enter) or back from PIM to
PE I get the screen full of flashing squares, and no text. It seams that
the video mode is set wrongly to text, instead of graphics.
To repair it, I exit PIM (Esc) or type Ctrl-Z in PE to go to a DOS
shell, and exit back into PE.

Does anybody know of a solution to this problem?

Thanks in advance,
Paulo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 19:57:09 +0100
Reply-To:     Paulo.Custodio@alcatel.de
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@ALCATEL.DE>
Organization: Alcatel
Subject:      Re: Special keys in PALRUN running PE/PIM
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

The answer from Andreas may be usefull to somebody else.
Paulo

Andreas Garzotto wrote:
>
> Paulo Custodio wrote:
> > Keys: Fn-, (date) Fn-. (time)
>
> No direct way. However you can add a macro that you assign to the keys
> you like (e.g. Alt-D and Alt-T) that press the keys for Date and Time
> for you (scan codes are d100 and d200).
>
> >Fn-num-. (cut) Fn-= (copy) Fn-+ (paste)
>
> See the online help:
>  ESC-W                -> put selection into clipboard
>  W                   -> put selection into clipboard and delete it
>  Y                   -> insert clipboard contents
>
> Andreas

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 15:12:26 -0500
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Java- and Javascripts questions
Comments: To: Stephan Goeldi <stephan.goeldi@datacomm.ch>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I wrote:

">This means that you could read Java with the LX,so what is
then the problem?"

Goldie wrote:

"No. You only receive the OUTPUT of the Java servlet.
The Output is NOT Java. It is standardcode like HTML."

I noticed when I rered my email that my formulations were wrong,but=
 then I had already sent it away.I ofcourse ment that in the end you=
 will still sit with a html-page,no matter if it is Java or  Java servlet=
 or anything else,and if the server could do the job ,as in Java servlet,(I=
 believed wrongly) instead of the LX,then fine.

That was appearantly not right either,but that what I wanted to say=
 to Bryan.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 21:15:22 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      Drowning the display: self-inflicted sorrows
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi all,

sorry to have bothered you with a self-inflicted problem in my
last post that complained about being drowned by all those
packet data displayed while on-line, slowing communication
down.

Somebody had disclosed the "@11" command to me to find out how
much memory I had left after loading POST/LX. I had put that
in my launch command and forgotten about it. So in addition to
reporting memory left it told me everything about packets
being accepted and rejected etc.etc.

I you want to share the experience, here is the batch command
that produced the havoc:

WWW.EXE -d -@11"!post.exe"

Enjoy !
Winfried

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 15:33:24 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: 123 on my laptop 286? Where to download?
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Martin,

> But I would like a copy of 123 Lotus that works on my 286 and reads the
> 123 Lotus files from the Hp.
>
> Does anyone have a site where I can download a version of 123 Lotus? I
> have a licence don`t I since its in the Hplx?

Get in touch with Lotus/IBM in your country and give them evidence of your
purchase of palmi as well a a written confirmation, that you will never ever in
ten thousand million billion lightyears use 1-2-3 both on palmi and your
desktop simultaneously. They should send you a set of diskettes for free.

It's what Lotus Germany did one year ago :-)

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 21:54:40 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      Re: my computer and internet
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> From:    Chris Lott <rclott@MAIL.HIWAAY.NET>
> I'm not sure why you would want someone to re-send their message
> upon getting this receipt notification message - unless you've
> experienced that such messages actually aren't getting to you, and
> the receipt confirmation is coming from somewhere else in your
> ISP's system.

they are not getting to me

but where are the confirmation messages coming from?


Analysts call Y2K: The Movie a millennial disaster

Not only is it inaccurate, it may increase Y2K nervousness in audience.

http://www.computerworld.com/home/news.nsf/CWFlash/9911184y2kmovie

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 15:45:49 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Agrajag <agrajag@MEDIAONE.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Agrajag <agrajag@MEDIAONE.NET>
Subject:      HP 200LX --> HP 48SX && HP 200LX --> Macintosh
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----=_NextPart_000_0071_01BF3500.A6723D40"

This is a multi-part message in MIME format.

------=_NextPart_000_0071_01BF3500.A6723D40
Content-Type: text/plain;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I have heard that one can transfer from an HP calculator to an HP 200 LX =
using the infa-red port, how is this done??  are there any web pages =
discussing it?  also, when at school, I am forced to use a Macintosh for =
my AP computer sciences course, and I want to be able to simply transfer =
chunks of C++ code to my palmtop so that I can edit on the go.

thanks for the help,

  -Agrajag

"Time is viewed in the information age as a commodity that can be =
bought, sold, traded and generally controlled at will."

"I'm really totally together, I even think I should be."


------=_NextPart_000_0071_01BF3500.A6723D40
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2919.3800" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I have heard that one can transfer from =
an HP=20
calculator to an HP 200 LX using the infa-red port, how is this =
done??&nbsp; are=20
there any web pages discussing it?&nbsp; also, when at school, I am =
forced to=20
use a Macintosh for my AP computer sciences course, and I want to be =
able to=20
simply transfer chunks of C++ code to my palmtop so that I can edit on =
the=20
go.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>thanks for the help,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2><BR>&nbsp; -Agrajag</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>"Time is viewed in the information age =
as a=20
commodity that can be bought, sold, traded and generally controlled at=20
will."</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>"I'm really totally together, I even =
think I should=20
be."<BR></FONT></DIV></BODY></HTML>

------=_NextPart_000_0071_01BF3500.A6723D40--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 08:34:46 +1030
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rod Whitby <rwhitby@ASC.CORP.MOT.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rod Whitby <rwhitby@ASC.CORP.MOT.COM>
Subject:      Re: LXTCP 1.2 beta 8 released (LXMTA with IMAP support added)
In-Reply-To:  <199911221842.FAA23717@fraser.asc.corp.mot.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Fryday writes:
> Woohoo!! IMAP sounds great! What e-mail software should I use?

You can use PNR (Palmtop News Reader), or you can convert the
downloaded files into any other format (the file formats for LXTCP are
open and fully documented).

--
-- Rod Whitby, Snr Staff Engr, Electronic Design Automation --
-- Motorola Australia Software Centre - Adelaide, Australia --
-- Phone: +61 8 8203 3526, Fax: +61 8 8203 3501, <GMT+9:30> --
-- Personal: rwhitby@hplx.net <URL:http://rwhitby.hplx.net> --

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 11:18:37 +1300
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, lodger@NZ1.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Roger Whitmarsh <lodger@NZ1.IBM.COM>
Subject:      Body Mass Index
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Just a simplification of the various BMI formulae posted
on the list over the past few months, and in the latest
Palmtop Paper Newsletter.
For some reason the calculation has only been offered in
an intimidating form, when really it is a very simple
relationship of weight and (height-squared).
This is all you need:

BMI = Kg / metres2              eg 70/1.782 = 22.1
or
BMI = (pounds/inches2) * 705  eg (154/702)*704 = 22.1

Examples are for me, 5ft 10in & 154 pounds (1.78m & 70Kg)

Cheers, Roger

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 22:47:12 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Re2: Other DOS Version on HP 200 LX
Comments: To: Mack Baggette <mack@times2tech.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> > AFAIK, the ROM is built into the Hornet chip. So we cannot change it.
>
> The ROM is on 2 separate masked ROM chips on the palmtop motherboard and
> not built into the Hornet chip.

So the obvious question for someone like me who knows nothing about this
techie stuff:  Can the rom be reused in a new machine?  Could a new
machine boot to rom, say, if there were no flashcard in a slot or boot
whatever was on a flashcard?

Ignoring, the obvious answer that anything FOR A PRICE is possible! (G)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 01:31:44 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Re: IRC/LX + ICQ? (could a dasoft programer coment this?)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> OK,but could you chat on all chatplaces or is here a limitation here?

I only know of ONE chat place with ICQ.
Anyhow MICQ only has one.

> I would very much like to try it,perhaps we can chat together this =
week?

sure.
ICQ:31029088

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 17:32:03 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, doctor@FRUITBAT.ORG
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peter Castro <doctor@FRUITBAT.ORG>
Subject:      Re: Retrofitting a Newton keyboard
In-Reply-To:  <yam7995.1849.24306000@smtp.ben2.ucla.edu> from "Terrence Chun"
              at Nov 22, 99 10:42:36 am
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Terrence Chun said ...
>
> I am looking into the possibility of using a Newton keyboard with my DS
> 200lx.
>
> I understand that Shier at one time made pre-fab keyboard kits, but I can't
> find any reference to them on their website anymore.
>
> Ebay seems to have a steady supply of them going for $40-80.  I would be
> willing to make the retrofit myself, if it isn't too complicated.
>
> How much extra equipment is required?  I'm sure that I will need to
> sacrifice an HP serial connector (about $20) for the job.
>
> Any advice of suggestions from people who have done the deed would be
> greatly appreciated.

Get the ntkpac05.zip file from SUPER.  It contains a keyboard driver TSR
and a readme.txt which gives the pin connections to make between the
Newton Keyboard and the LX's serial port.

There were two general approaches to doing this project:
1) rip out Newton's cable, cut off end of HP-F1015A cable and solder it
   to the keyboard.
2) build a Mini-DIN 8-pin female to HP-F1015A female connector.  I took
   this approach as I wanted to be able to use the Newton keyboard with
   other devices.

Both of the above generally requires a sacrifice of the HP-F1015A cable.
It is possible to use a dual-5-pin cable connector in place of the
HP-F1015A, but generally looks ugly.  Plus, unless you add the little
bump on the top of the connector, you might plug it in backwards and cause
damage to your serial port.

> Thanks!
> -- Terry

--
Peter A. Castro (doctor@fruitbat.org) or (pcastro@us.oracle.com)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 22:18:27 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      FLUFF: Non-palmtop Item FS
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Ok, I know I am going to get flamed for a non-palmtop item on the list, =
but
I did preface the subject line with the correct header. Anyways, I =
figured
since I have know a lot of you for several years, I figured what better
place than here to start 'spreading the word'. A fellow deputy friend of
mine and I have started a new business selling handmade novelty items. We
have finally brought a product to market and are selling it both in =
retail
locations and on eBay. We have several more items we will be selling =
through
a web site and in the retail locations we have obtained. Anyways, if any =
of
you wish to take a look here's the eBay URL:

http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=3D205562156

Feel free to order a few and help put our kid's through college. Once =
again,
thanks for the bandwidth and I promise not to abuse the list with such =
stuff
again.

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 23:47:35 -0500
Reply-To:     acorso@ibm.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         DIGEST Tony Corso <acorso@IBM.NET>
Subject:      200 lx in Forbes ASAP
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

page 150 of the latest issue of Forbe's ASAP mentions a guy that
has the seating arrangement of 25 airliners on his 200lx.

Perhaps we ought to invite him into the group

I've pasted the short sidebar below:

T

________________________________________________________

Bob Conti:     Backseat Pilot

    A voice on the end of the line answers: "Hey ya...hold on...just a sec...

    "Hello? Sorry about that, I've got a computer on one line, a client on
    the other, and a cell phone in my hand. I need more bandwidth!"

    Bob Conti, COO and senior vice president of The Alexander Group, a
    sales and marketing consultancy based in San Francisco, is always
    green-light go. He spends four days a week flying to client meetings
    across the United States and clocked 250,000 miles in the air last
    year. He's one of a select group of business travelers who make
    commercial airlines work for them instead of the other way around.
    Conti's secret? A cell phone, a PDA, a laptop, and an old-fashioned
    paper directory, the OAG Pocket Flight Guide.

    "Just last week," says Conti, "I'm on an 8:30 a.m. flight out of San
    Francisco to Phoenix. We're waiting to board, and they announce that
    the pilot is stuck in traffic on the Bay Bridge! This is what's known as
    the Big Lie!"

    Conti jumps into action. He pulls out his well-worn OAG guide, which
    lists every flight (including the ones your travel agent won't tell you
    about) for 800 airlines worldwide, and locates the next outbound flight.
    "I call my travel agent on my Nokia 6160 cell phone, book the flight,
    and I'm in Phoenix in time for the meeting."

    Always, always, he says, carry the OAG. That's Conti's Rule of
    Engagement No. 1.

    To Conti, being a road warrior isn't a hassle, it's a strategic game. To
    get the best seat on any given plane, he's recorded the complete
    seating chart of 25 airplanes in his HP 200LX PDA. "I've got the entire
    United fleet in here," he says, tapping the little black gadget. "I've got
    Delta, America West, hmm, who else?..."

    Once he's settled into a choice seat he boots up his IBM ThinkPad
    570. It's thin, reliable, and stays powered for 3.5 hours on one battery,
    he says. But even for laptop work, he's got a few rules:

    o Conti's Rule of Engagement No. 2 Never, ever use a client's name in
    a document aboard a plane. Airplanes are public places. "Type in xxx
    in place of the name and do a global search and replace later in the
    hotel room," he says.

    o Conti's Rule of Engagement No. 3 Block out onboard distractions.
    "For years I would carry Walkman headphones with me. When I
    wanted to work I'd pop on the headphones, and no one would bother
    me. I didn't have a Walkman, just the headphones."

    There are more rules, but Bob's protective of the really choice
    material-like when to invoke the FAA's Rule 240 in order to get a new
    flight, or the statistically favorable reason for making the gate agent
    smile. The next time you're in the airport, look for him. He'll be the one
    with the cell phone to his ear, PDA open, fingers typing in the latest
    seating configuration. Traveling is a game when you know all the rules

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 23:10:23 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Jeff Johns <jeffj@SCOTT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jeff Johns <jeffj@SCOTT.NET>
Subject:      Re: 200 lx in Forbes ASAP
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Mon, 22 Nov 1999 23:47:35 -0500, DIGEST Tony Corso <acorso@ibm.net> =
wrote:

> Perhaps we ought to invite him into the group

Or, if Mr. Conti is already here, please raise your hand so that I can =
give
it a firm handshake!

Jeff

           ---- Jeff Johns W4JEF - Reserve Patrol Captain ----
           ---    Jefferson County Sheriff's Department    ---
           ---           Birmingham, Alabama USA           ---
           ---  Finger jeffj@scott.net for my PGP RSA Key  ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 00:27:29 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Microcom's MicroPorte pocket modem 4232bis with fax
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

Hi.  Does anyone here use the above  fax modem?  I am having difficulty
getting it to work properly with my palmtop.

Any help appreciated.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 07:27:07 +0200
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Ernst, Yehuda" <yernst@NDSISRAEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Ernst, Yehuda" <yernst@NDSISRAEL.COM>
Subject:      6 meg flash format
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"

Hello!
I got a 6meg flash and modem  (2400) I want to use it in my 200lx.
Can some help me and tell me what do I have to do ?
How to format it what to put in config.sys etc.


Thanks Yehuda.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 22 Nov 1999 21:59:14 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      for Lars only
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Lars

messages to you are returned

>Soooo,I was too "offensive" when writing abut the reputation of the swedish
women? :-)

i wrote back but the message came back from your server with error encoding

maybe it has to do with your name - the letter after the r does not show

this is the message:

Impossible d'envoyer le message car l'un des destinataires a =E9t=E9 refus=
=E9 par
le serveur=2E L'adresse d'email refus=E9e =E9tait 'Lars Hedstr m
<nxw988e@tninet=2Ese>'=2E Objet '', Compte : 'pop=2Ewanadoo=2Efr (1)', Serve=
ur :
'smtp=2Ewanadoo=2Efr', Protocole : SMTP, R=E9ponse du serveur : '501 RCPT <L=
ars>
Invalid domain name syntax', Port : 25, S=E9curis=E9 (SSL) : Non, Erreur de
serveur : 501, Num=E9ro d'erreur : 0x800CCC79

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 00:26:28 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "James P. Grenert" <grenert.james@MAYO.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "James P. Grenert" <grenert.james@MAYO.EDU>
Organization: Mayo Medical School
Subject:      Re: HP 200LX --> HP 48SX && HP 200LX --> Macintosh
Comments: To: Agrajag <agrajag@MEDIAONE.NET>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 22 Nov 1999, Agrajag wrote:
> I have heard that one can transfer from an HP calculator to an HP 200
> LX using the infa-red port, how is this done??
This is definitely possible.  I did it a few times back when I had a 48G.
You use kermit on both devices.  On the 200LX it is done from the Terminal
emulator.  I do not recall the details, unfortunately.  Some points to
make: Be sure that you have the IR port on.  Be sure you match baud rates.
I think the 48 is limited to a very slow rate.  You can speed this up with
a free program which is listed in the HP48 FAQ which I'm sure is available
somewhere on the web.  Sorry I can't recall any more specifics.

Cheers.
J. P. Grenert
grenert@mayo.edu

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 06:55:58 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Other DOS Version on HP 200 LX
Comments: To: Chris Lott <rclott@MAIL.HIWAAY.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Chris,

> We don't know (or do we) whether the Hornet is mask-ROM or PROM,
> do we?

I don't. :-)

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 06:56:01 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Retrofitting a Newton keyboard
Comments: To: Terrence Chun <tchun@UCLA.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Terry,

> How much extra equipment is required?  I'm sure that I will need to
> sacrifice an HP serial connector (about $20) for the job.
>
> Any advice of suggestions from people who have done the deed would be
> greatly appreciated.

No, you don't have to sacrifice such a connector. You can make one by
yourself.
Have a look at daniel.hplx.net/palmtop.html if you want to know how to
make such a plug!

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 16:03:01 +0800
Reply-To:     "Roger S." <rogerswn@ctimail.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Roger S." <rogerswn@CTIMAIL.COM>
Subject:      Re: HP 200LX --> HP 48SX && HP 200LX --> Macintosh
Comments: To: "James P. Grenert" <grenert.james@MAYO.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset="big5"
Content-Transfer-Encoding: base64
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** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 00:21:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: Please help if you can!
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hmmm.  Just took the for-upgrade 1Mb 200LX here, apart, finally got my
repaired soldering station back today <G>  Should have it apart until I
solder on it in the AM, then do the 1000Cx machine, then put both back
together & get them ready to sell. <G>

Looking on that palmtop's momboard, where exactly is that part?  I
scanned the motherboard here, but didn't see that exact code on any
part.

If you can point me AT the part, I can tell;  I'm guessing it's a small
value Capacitor.  Is this part like the larger yellow/brown boxes on
there that also have 2 leads, with similar numbers & codes?  Does it
have a similar 'bar' marking across one end (a polarity marking?)

Also wanted to be sure which is the "Send" IR LED and which is the
"Receive" phototransistor, if you can tell me (About to get the parts so
I can tell with an IR sensor, pretty soon here, for myself <G>)  I can
get some ferrite beads, if I figured right & the black lensed unit's the
photodiode, that will fit on there fairly easily;  Am about to order
parts tomorrow for a friend, can throw some in the order.

Something handy for those with a newer 'mainframe' Win95 or WinNT box
with sound, is http://www.dialpad.com/, BTW - You can use that to dial
any US phone number as a local call, I'm told (I don't have the Win95
machine together, right now, but that's going to happen.)  I imagine a
non-US Netizen could call a US phone number for a voice call, using
that...

  Mark

Daniel Hertrich wrote:
>
> Hi friends,
>
> Stefan Peichl, Andreas Garzotto and me are still soldering around to
> find a solution for our problem with connecting the palmtop via IR and
> a mobile phone to the internet.
>
> We still don't have an universal solution, but I think I'm just finding
> one - but I need someone's help.
>
> DO SOMEONE HERE KNOW
> what that part inside the palmtop could be:
> It is a SMD part, 2 contacts, abt. 1mm*2mm, color is somewhat between
> brown and yellow, and a code is on its surface:
> _
> KA4 (the K has an overline)
>
> is it possible that it is a diode? or a capacitor? or even a resistor?
> I tried to measure its behaviour, but without success.
>
> Thanks in advance
>
> daniel
> --
>
> Daniel Hertrich                 d.hertrich@gmx.de
> homepage:                  http://daniel.hplx.net
> telephone:                   +49 (0)177 795 55 49
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 09:28:17 +0100
Reply-To:     Etienne Lemaire <stelem@attglobal.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Etienne Lemaire <etienne.lemaire@PANDORA.BE>
Subject:      Re: Windows 95/98 won't release the serial ports
Comments: To: j_vanderstel@JUNO.COM
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Thanks, John. That did the trick!

Etienne
----------
> From: John J Vanderstel <j_vanderstel@JUNO.COM>
> To: HPLX-L@UCONNVM.UConn.Edu
> Subject: Windows 95/98 won't release the serial ports
> Date: mercredi 17 novembre 1999 2:04
>
> Hi Tom,
>
> >CPack a viable alternative?  Seems like the Desktop Com Port won't free
> up
> >for CPack but obviously did for Transfile.  Is there a way to control
> Com
> >Ports from Win 98?  I have not been able to do so (or much of anything
> else
> >as my msg's seem to indicate!).
> >
> >Again thanks to all!
> >Tom still in Muscat
>
> Sorry for not catching the correct subject line of your original post.
> I'm subscribed to the digest form of this list, so my replies don't
> necessarily grab the subject line.
>
> I work as a beta tester for remote backup software and we learned a trick
> relating to that.  To force Windows to release it's serial ports we
> include the following additional lines under the heading "386Enh" in
> the system.ini file in the windows directory:
>
> ComBoostTime=5
> Com1AutoAssign=2
> Com2AutoAssign=2
> Com3AutoAssign=2
> Com4AutoAssign=2
> Com1FIFO=1
> Com2FIFO=1
> Com3FIFO=1
> Com4FIFO=1
>
> Please let us know if this fixes your problem with getting Windows 95/98
> to release it's serial ports. :-)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 00:47:20 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: Other DOS Version on HP 200 LX
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

F. Kaufman wrote:
>
> > > AFAIK, the ROM is built into the Hornet chip. So we cannot change it.
> >
> > The ROM is on 2 separate masked ROM chips on the palmtop motherboard and
> > not built into the Hornet chip.
>
> So the obvious question for someone like me who knows nothing about this
> techie stuff:  Can the rom be reused in a new machine?  Could a new
> machine boot to rom, say, if there were no flashcard in a slot or boot
> whatever was on a flashcard?
>
> Ignoring, the obvious answer that anything FOR A PRICE is possible! (G)

I suspect it can be done, but, those chips are very fine-pitch SMD
(TSOP-48 format) chips, so I will pass for a while (until I buy a better
soldering station anyways - Give me a month <G>)

To do this - you'd have to find out what (if any!) existing part can be
bought & programmed to fit in there, ROM-ize an existing version of DOS,
and get a somewhat pricey adapter to burn the ROM in a typical ROM
burner.  Or get HP or someone to make new ROMs for us;  I don't remember
seeing a TSOP 48-pin part lately...

Probably just as easy to make a set of replacement/add-in commands to
make Dos 5 plus those commands (in your path), act the ways you want the
200LX to act.  I guess my question here is, what do we want from Dox
6.22 (or FreeDos?) that isn't already on the machine?  (And, is there an
easier way to get it?)

I suspect we could use something like LoadLin, re-written slightly, to
load most ANY OS into the 200LX, really...

  Mark

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 00:48:29 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Reinhard Mueller <molitor@01019FREENET.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Reinhard Mueller <molitor@01019FREENET.DE>
Subject:      Re: 123 on my laptop 286? Where to download?
Comments: To: hpstaber@COMPUSERVE.COM
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

> > But I would like a copy of 123 Lotus that works on my 286 and reads the
> > 123 Lotus files from the Hp.
> >
> > Does anyone have a site where I can download a version of 123 Lotus? I
> > have a licence don`t I since its in the Hplx?
>
> Get in touch with Lotus/IBM in your country and give them evidence of your
> purchase of palmi as well a a written confirmation, that you will never ever
>  in
> ten thousand million billion lightyears use 1-2-3 both on palmi and your
> desktop simultaneously. They should send you a set of diskettes for free.
>
> It's what Lotus Germany did one year ago :-)

Great! I will try this, too. How did you give evidence that you
own a palmtop? I don't have the bill anymore, maybe telling them
my lx's serial number might do it?

Cheers,
Reinhard



Goin' Postal - HP 100/200LX (v3.08) REGISTERED

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 00:53:05 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: Other DOS Version on HP 200 LX
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

It's not EPRom - no Quartz window.  I doubt it's EEProm;  No part
numbers (Just HP internal markings) on the chips.  Probably Masked ROM,
custom fabbed, as that's the cheapest option & easiest to install (you
don't have to drop each ROM into a programming fixture & then program
it, it's programmed as it's manufactured.)

  Mark

Daniel Hertrich wrote:
>
> Hi Chris,
>
> > We don't know (or do we) whether the Hornet is mask-ROM or PROM,
> > do we?
>
> I don't. :-)
>
> GTX
> daniel
>
> --
>
> Daniel Hertrich                 d.hertrich@gmx.de
> homepage:                  http://daniel.hplx.net
> telephone:                   +49 (0)177 795 55 49

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 00:58:32 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: Retrofitting a Newton keyboard
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Daniel Hertrich wrote:
>
> Hi Terry,
>
> > How much extra equipment is required?  I'm sure that I will need to
> > sacrifice an HP serial connector (about $20) for the job.
> >
> > Any advice of suggestions from people who have done the deed would be
> > greatly appreciated.
>
> No, you don't have to sacrifice such a connector. You can make one by
> yourself.
> Have a look at daniel.hplx.net/palmtop.html if you want to know how to
> make such a plug!
>
> GTX
> daniel
>
> --
>
> Daniel Hertrich                 d.hertrich@gmx.de
> homepage:                  http://daniel.hplx.net
> telephone:                   +49 (0)177 795 55 49

I could probably make these for people wanting those, they're fairly
easy for me to build (I need to figure out potting the cable so it's
durable, but I think I know how I want to do that.)  A 1" connector to
do that (just plug it into the HP & plug the newton keyboard into that)
should be fairly cheapish, if I do it the UGLY way.  A little more if I
make it pretty.  (I don't know how many people here are computer
"hackers" and how many computer users without prototyping experience,
I'll let those wanting such bug me off-list.)

Can anyone tell me where to get Newton keyboards, other than eBay?  If
there's a cheaper source, I would like to know - still learning about
200LX's <G>  (Off-list on that too, is good.)

  Mark

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 12:40:57 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      FLUFF: Re: Java- and Javascript
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

This subject became fluff now.

>each has its own niche. Java is turning out to be a very potent tool for
>many businesses in developing softare applications. Perl is not so good
>at large scale applications. C and Forth tend to get much more system
>oriented.

There are different points of view:

*** programmer's
*** user's
*** information architect's
*** usability engineer's
*** marketing people's

The *programmers* of course are happy about Java, because programming
becomes easier. The *user* is not so happy, because his system crashes
(Netscape Communicator latest version) from time to time. The *information
architect* doesn't care about. The *usability engineer* says: less is more.
The marketing people are very happy, because Java is a buzzword. But
marketing people don't care much about the users and usability (they are
happy about Windows CE too!). To get good usability you don't need what
the marketing people tell you. I saw a lot of systems built WITHOUT Java,
that had all the advantages you told about. Think of e.g. Midgard
www.midgard-project.org). There are people who tell you, that something
like this is only possible with Java. But Midgard has PHP, mySQL and
perhaps a little Perl. Java has its place on the web. But it is often called
the ultimate solution where it is not really necessary. The ultimate
solution
in my view is LAMP (Linux-Apache-MySQL-PHP). But of course, these are
open source, and so nobody can make money ...

>> >Java provides a modern software development method that has shown its
>> >capabilities for rapid development.
>> Sounds like Windows CE ...
>Windows CE is an operating system, not a development environment. Most
>folks still use C++ to create applications for Windows CE.

I wanted to say: Sounds like Windows CE *marketing* ...


>> If my Webbrowser hangs, it is always because of a Java applet.
>> If you have do make money with your Website, you cannot ignore that.
>
>I'd wonder about the browser and its implementation of services if you
>really wanted to fix this.

I had the crashes with Netscape Navigator 4.08 and Communicator 4.7.
MS Internet Explorer didn't crash but gave me an error message. I'm not
interested in why a Browser crashes or gives me an error message. I want
to think like other users too, because my job is usability engineering FOR
USERS. If you tell me, that I have to load a plug-in or change the version:
You cannot  ask me for a ticket to get a website! Most users on the web
don't want to care about these things.

So: Java is bleeding edge (www.useit.com/alertbox)

-goe-

"The medium is not the message.
The message is the message"
Jakob Nielsen

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 10:27:08 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Penick <bnj@INAME.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Penick <bnj@INAME.COM>
Subject:      Personal Ancestral File 3.0 - Assistance requested
MIME-version: 1.0
Content-type: text/plain; charset="iso-8859-1"
Content-transfer-encoding: 7bit

Because of some recommendations from this group a few weeks back I got a
copy of PAF 3.0 to use in my 200lx while at the library etc.  Despite the
statement on the package that it needs a 286, it runs well on my double
speed.  But I am having a problem setting the video so that I can see all
the screens clearly.  There is a choice of black & white but it still leaves
me wanting.  Any hints from those of you that use it?
Thanks,
bob

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 11:24:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: HP 200LX --> HP 48SX && HP 200LX --> Macintosh
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>  have heard that one can transfer from an HP calculator to an HP 200 LX =
> using the infa-red port, how is this done??  are there any web pages =
> discussing it?  also, when at school, I am forced to use a Macintosh for =
> my AP computer sciences course, and I want to be able to simply transfer =
> chunks of C++ code to my palmtop so that I can edit on the go.
>
"Forced to use a Macintosh"? Poor thing! <grin>

I don't know about the 48SX/200LX conenction, but I assume it is via infrared,
using Filer on the 200LX and I-don't-know-what on the 48SX.

The 200LX/Mac connection requires wire, typically: the HP cable (null modem LX
10-pin to 9-pin serial) connected, by a 9/25 pin serial adapter, to a Mac modem
cable (full modem 25-pin serial to Mac 8-pin DIN) plugegd into the Mac's modem
port or whichever you've selected in Chooser. Software is simply a standard
modem communication program on both sides of the connection -- I use the 200LX's
built-in Datacomm and the shareware Zterm 1.01 on the Mac.

(Note that if your Mac is an IR-equipped PowerBook or iBook, you can probably
transfer files via infrared, but I've not tried this.)

Hope this helps,
Bruce in Toronto
(100LX, 200LX, Mac IIci and PowerMac 9500)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 11:01:51 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: WWW/LX Browsing Problem
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On Sun, 21 Nov 1999 22:38:58 -0500, Takeshi Ochi <tochi01@IBM.NET>
wrote:

> I am trying to browse the web using registered version of WWW/LX. It
> connects fine at the speed of 19200, but I when I try to open the web
>  page, HV opens a blank page after the message "Receiving data...".
> However, if I set the baud speed to 1200, it sometimes retrieve data
> correctly and opens the web page.
> I tried "Slowmodem" option in www.cfg but situation does not change.

We have seen in the past few days many problems with
ATTGLOBAL - which is where IBM.NET is now running. The ATT
Global newsgroup is apparently full of complaints about the
same issue. To make things worse: In ATT nodes outside the
USA the problem is mostly unknown! In the US nodes it is
mostly a problem, but on some few occasions all is well.

ATT seems to have acknowledged that this is in their
servers and their developers are working on it. So far, no
solution.

We analysed this phenomenon and determined that WWW/LX and
HV work fine! HV seems to received an empty webpage and
thus paints it on the screen. Why it is empty is up to ATT
Global to explain.

Please _do_ call ATT GLOBAL and complain to their Tech
Support that you get empty pages (this seems to happen on
various platforms, BTW!) The more they hear about it, the
more they will sit up and pay attention.

  Avi M. D&A
  http://www.dasoft.com

(Yes, official response from D&A)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 11:01:56 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Java- and Javascripts questions
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Lars Hedstroem <nxw988e@TNINET.SE> posted,

> But Avi said here in another email that not either the Java script would
>  be possible,it would,and I am quoting:
>
> "To run the latter twoJava and Javascript, you need a lot of
> processing power and that is not available on the palmtop.
> Also, it requires fairly large code sets and that is also not
> possible on the 80186 chip."
>
> But surely,doesn't Javascript  takes less processing power than Java?Even
>  if its code sets are not possible on the 80186 chip,as Avi mentioned?

If you think that it is possible to code in the Palmtop the
code that is needed to support Javascript, I invite you to
do it, please. I will be waiting for it with great
expectations. That would be wonderful. Please do it... :-)

> Question 2:Stephan Goeldi mentioned an alternative to Java,and I quote
>  him too:
>
> " Serverside Java (so-called servlets) produce HTML
> code that is LX-readable."
>
> But if you strip off the interactivity with the web,which I take it
>  must be made if it will be LX-readable,what is then left of the site?Is
>  it useable at all or only a meaningless page?

You can easily generate nice HTML code on the server and
send it to the requestor (HV, for example). But if you can
generate the HTML hy not just have the HTML ready to
download? The only additional functionality the Serverside
Java adds is to customize HTML documents.

HV is unaffected by that, since it receives HTML documents.
Hopefully, the Java servelets authors also made sure the
code generated is HTML 3.2 which would be supported by HV.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 11:02:05 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Drowning the display: self-inflicted sorrows
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES> wrote:

> sorry to have bothered you with a self-inflicted problem in my
> last post that complained about being drowned by all those
> packet data displayed while on-line, slowing communication
> down.
>
> Somebody had disclosed the "@11" command to me to find out how
> much memory I had left after loading POST/LX. I had put that
> in my launch command and forgotten about it. So in addition to
> reporting memory left it told me everything about packets
> being accepted and rejected etc.etc.

This is a tool we use for debugging purposes only. It is
not for normal usage. We found that less than 5% of the
logs were of any use. Processing emails with unsolicited
logs is wateful of our time and efforts, and impacts
DIRECTLY on our ability to help our customers...

So please, I plead with you all - do not send logs to us if
you have problems with WWW/LX Plus - I promise, if we need
a log, we will ask for it.

Let me add: In almost ALL CASES, we can solve problems with
WWW/LX Plus with no need for logs. For example, we have
gone fro months(!) with no need for logs at all! We just
produced one of them the otherday for the first time in
months, to debug the ATT GLOBAL Blank HTML pages.

I will therefore institute a procedure by which all emails
with unrequested logs will be returned to customers. This
will save us the time and energy to look through unneeded
material.

If you have an uncontrollable need :-) to produce logs
<ROFL> and send them somewhere I would like to offer to
you the following excellent email Address:

     Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>

If you send logs to that address, make sure to send the
same log three or four times, just for fun :) I know
Winfried is going to be delighted to receive as many logs
as possible, to fill up his email box and make him happy...

Thank you all very much!

  Avi Meshar
  D&A Software
  http://www.dasoft.com

Yes, another official D&A Software Communication ...
except, please don't seriously my suggestion to send stuff
to Winfried, just resist the temptation! :-)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 14:10:52 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Plus-one disadvantage
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I have noticed one disadvantage with WWW/LX Plus.

You can't open Lotus 123 when the memo editor is launched in Post.exe,often=
 when I write an email I want to be able to open worksheets to reach=
 information there.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 13:37:17 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: Retrofitting a Newton keyboard
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<Can anyone tell me where to get Newton keyboards, other than eBay?  If
there's a cheaper source, I would like to know>>

Mack and I found several excellent keyboard solutions for the 200LX at
COMDEX.  We haven't settled for sure on which one, but it will probably be
more intuitive and 200LX-like than the Newton. We are specking it so that
the 200LX connectivity cable will plug directly from the 200LX to the
keyboard.

None of this is final, but there is a reasonable chance we will be able to
offer the product by February.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 15:25:30 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: 123 on my laptop 286? Where to download?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Reinhard,

> Great! I will try this, too. How did you give evidence that you
> own a palmtop? I don't have the bill anymore, maybe telling them
> my lx's serial number might do it?

E-mailed to a guy at Lotus/Munich - he gave me his fax nbr - I faxed him a copy
of the purchase order of palmi ;-)



HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 20:29:14 -0000
Reply-To:     abmenezes@mail.telepac.pt
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
Subject:      Ok. I've a Nokia 7110, and now?
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Hi all

I've a new Nokia 7110 cellular phone with irda modem. Can you
help me connecting it to my HP 200LX?

TIA

Regards

Antonio
---------------------------------------------------------
Antonio Queiroz Menezes M.Sc. (Econo)
Porto - Portugal
Cell Phone + 351 91 7555590
Work + 351 22 9981532 (direct, from 9 a.m. to 6 p.m., local time)
abmenezes@mail.telepac.pt
AntonioMenezes@compuserve.com
aameneze@aep.mailpac.pt  (work)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 21:12:45 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, BOCHE@DE.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ulrich Boche <BOCHE@DE.IBM.COM>
Subject:      Re: Lotus Notes
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

I wrote a LotusScript program that synchronizes the HP 200 LX appointment
book with the Notes calendar. The synchronization is one-way (the HP is the
master, the Notes calendar the slave); you need to have the HP Connectivity
Pack and it is at least a two-step process. Also, you need a designer license
for Lotus Notes (a desktop license will not do) to install the agent.

If you're still interested :-) send me an e-mail and I'll send you the program.
I don't synchronize the phone book with the Notes PAB because I don't need
phone numbers in Notes and I don't need e-mail addresses on the palmtop,
so there is no incentive for me there.

Ulrich Boche

Lawrence Fast <lfast@NATIVELAW.COM> wrote:

>>Has anyone been able to sync the HP built-in apps (or any other PIM
>>programme that runs on the 200LX) with Lotus Notes?  I have used my 200LX
>>happily since it first came out but unless I can sync with Lotus Notes I
>>will have to switch to a CE machine.   Any help with this problem would be
>>most gratefully received.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 22:02:03 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, BOCHE@DE.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ulrich Boche <BOCHE@DE.IBM.COM>
Subject:      Re: Java- and Javascripts questions
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

From a security point of view, Perl is exactly what you called JavaScript
because there is rarely another language, especially in CGI scripts, that
has caused more vulnerabilities than Perl.

Ulrich Boche

Stephan Goeldi <stephan.goeldi@DATACOMM.CH> wrote

>>...
>>by the client. The client must support JavaScript. JavaScript is NOT a
>>www standard. It was introduced by Netscape to enable bullshit like
>>mouse-over effects, hopping hopping graphics and other unusable
>>stuff. Very very seldom you find a really practical JavaScript. e.g. to
>>enable pulldown menues that are produced on-the-fly depending of
>>the pulldown menu-entry you selected before etc.
>>...
>>Perl is IMHO the best programming language on the web. Most
>>CGI scripts are Perl. There is a 4.x Perl version that runs very well
>>on the LX (www.palmtop.net). The actual standard on the web is
>>Perl 5.005. But who cares, if it is processed by the webserver?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 22:15:39 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Please help if you can!
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 22 Nov 1999 10:07:59 -0800, Daniel Hertrich <d.hertrich@GMX.DE> wrote:

> DO SOMEONE HERE KNOW
> what that part inside the palmtop could be:
> It is a SMD part, 2 contacts, abt. 1mm*2mm, color is somewhat between
> brown and yellow, and a code is on its surface:
> _
> KA4 (the K has an overline)
>
> is it possible that it is a diode? or a capacitor? or even a resistor?
> I tried to measure its behaviour, but without success.

(Daniel this is written before I got the reply from you..)

Me and my father is still working on this one. I have sent you a mail
about this.

Well he thinks it is a resistor now. He thinks that it is a "noise
reduction" resistor.. That could be the case could`nt it?

We will check some more databooks tomorrow. I am sure that we can find
what this component is. Do you have any pictures of it?

Will get back to you as soon as I know anything more..

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 13:14:19 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ashwin Balan <husk469@NETZERO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ashwin Balan <husk469@NETZERO.COM>
Subject:      200lx Case
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Would it be possible to remove the guts of my 200lx and put it in a
Magnesium body?? The plastic case is starting to get scratched up pretty
badly, and I do not want to risk the Hinge Crack. Thanks
Ashwin Balan
__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 15:24:24 CST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Larry N Zimmerman <zimm4@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Larry N Zimmerman <zimm4@JUNO.COM>
Subject:      Re: 200lx Case

If there are retrofit magnesium cases for the 200lx, please let me know
your source.

I'd love something like that.  More of a "Gee-whiz" factor than for
practical reasons however.

Larry Zimmerman

On Tue, 23 Nov 1999 13:14:19 -0800 Ashwin Balan <husk469@NETZERO.COM>
writes:
>Would it be possible to remove the guts of my 200lx and put it in a
>Magnesium body?? The plastic case is starting to get scratched up
>pretty
>badly, and I do not want to risk the Hinge Crack. Thanks
>Ashwin Balan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 16:33:32 -0600
Reply-To:     russelllewis@delphi.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russell Lewis <russelllewis@DELPHI.COM>
Subject:      Need serial adaptor

I just downloaded Rod Whitby's LXTCP and Palmtop News Reader and think
they are great.  They work just fine on my desktop machine, but to run
them on my 200LX, I will need to use an external modem.  I do have a
PCMCIA card modem, but since I only have a 1 meg palmtop, I don't have
the space on my C: drive to run these programs without a great
inconvenience.

So my question is, how do I connect an external modem to the serial
port?  I have tried using the serial transfer cable with a null modem
adaptor attached, but I could not talk to the modem.  Is there a special
adaptor made that goes from the HPLX serial port into a standard serial
port?

Thanks.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 22:42:43 -0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laurence Harvey <lharvey@CALLNETUK.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laurence Harvey <lharvey@CALLNETUK.COM>
Subject:      Please help if you can!
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Daniel wrote:
>what that part inside the palmtop could be:
>It is a SMD part, 2 contacts, abt. 1mm*2mm, color is somewhat between
>brown and yellow, and a code is on its surface:
>_
>KA4 (the K has an overline)
>
>is it possible that it is a diode? or a capacitor? or even a resistor?

I think your estimate of size is inaccurate, or your eyes very good if you
can read text on a 1mm * 2mm component.

If the component is nearer 2mm *4mm then there are probably two options.

If it is a light brown with silver tips, it is probably a ceramic capacitor
and I think this is probably what you have, especially if you do not get any
readings when testing it.

If it is dark brown (or black) with smaller silver tips, it is probably a
resistor, and there are normally marked with a three digit number - the
value of the resistor

The other common two contact component is yellow, but with light brown lines
at one end, these are polarised electrolytic capacitors, and there are many
different sizes of these in the Palmtop.

I my experience diodes are either cylindrical in shape or if rectangular,
have a white polarising mark/line at one end.

I do not have my Palmtop in pieces at the moment so cannot identify the
exact component you refer to but I hope this helps

Laurence

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 22:49:50 -0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Laurence Harvey <lharvey@CALLNETUK.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Laurence Harvey <lharvey@CALLNETUK.COM>
Subject:      Re: Retrofitting a Newton keyboard
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Peter Castro wrote
> Plus, unless you add the little
>bump on the top of the connector, you might plug it in backwards and cause
>damage to your serial port.

This is no problem, the serial port is very reliable and can easily survive
a backwards connector - I accidentally do it and have no problems

Laurence

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 16:09:15 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Kopplin <kopplin@TECHNOIR.NU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Kopplin <kopplin@TECHNOIR.NU>
Subject:      Re: Retrofitting a Newton keyboard
In-Reply-To:  <B0AB4DD57CD5D1118A230060975A10053469B9@mailhost.thaddeus.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

> Mack and I found several excellent keyboard solutions for the 200LX at
> COMDEX.  We haven't settled for sure on which one, but it will probably be
> more intuitive and 200LX-like than the Newton. We are specking it so that
> the 200LX connectivity cable will plug directly from the 200LX to the
> keyboard.

Do your solutions involve modifying a keyboard, or just the cable?

I wonder because I have a small PS2 keyboard made for the Dauphin
portable. It's a bit bigger than the Newton, 24cm x 14cm vs. 26x10, but it
has some extra keys the Newton lacks (Function, escape, an extra key that
could possibly be used for Menu). The keys are not great, but it's usable.
The case pops open easily and it looks like there would be room for
circuitry if necessary, and 3-4 AA batteries to provide power. The
keyboard is fairly cheap on ebay.

There was someone on the list who was working on a way to connect a
regular keyboard to the LX, but power was a problem. I emailed my
suggestion, but never got a response.

Could something like this be made to work?

Mike Kopplin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 01:12:11 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Ok. I've a Nokia 7110, and now?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 23 Nov 1999 12:43:13 -0800, Antonio Queiroz Menezes
<abmenezes@mail.telepac.pt> wrote:

> Hi all
>
> I've a new Nokia 7110 cellular phone with irda modem. Can you
> help me connecting it to my HP 200LX?
>
> TIA
>
> Regards

Damn it.. I thought that I would be the first with a Hplx and a 7110. I
am still waiting for mine :-))

Well first of all you need www/lx and a licence. If you already have
then you read the manual. I think it is something about irda there in
the latest version. The 7110 should work as the 8810.

You need to create a new "profile" with Port=-1 and thats it. It should
show "Irda" on the top line when in Post/lx.

But be aware that the Hplx have a shielding problem. It is not shielded
good enough against the rf noise the gsm makes. This is something that
are worked on at this moment by several members of this list.

Please report to the list about how you are doing..I can`t wait to get
my 7110..

(Hal could you hurry to send my Hplx back to mee:-) (I have just sent
it over :-)

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 18:18:10 -0600
Reply-To:     Mack Baggette <mack@times2tech.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mack Baggette <mack@TIMES2TECH.COM>
Organization: Times2 Tech
Subject:      Re2: Retrofitting a Newton keyboard
In-Reply-To:  <Pine.LNX.3.96.991123160254.6901A-100000@dewey.technoir.nu>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> Do your solutions involve modifying a keyboard, or just the cable?

It requires neither as we are having a keyboard made special with a 9 pin
male serial port in the back that will connect directly with the palmtop
connectivity cable.

> I wonder because I have a small PS2 keyboard made for the Dauphin
> portable. It's a bit bigger than the Newton, 24cm x 14cm vs. 26x10, but it
> has some extra keys the Newton lacks (Function, escape, an extra key that
> could possibly be used for Menu). The keys are not great, but it's usable.
> The case pops open easily and it looks like there would be room for
> circuitry if necessary, and 3-4 AA batteries to provide power. The
> keyboard is fairly cheap on ebay.

Our keyboard will be self powered with 4 AAA batteries as well so no power
will be required from the serial port.  It is 29.6cm x 17.5cm which makes
it larger than either keyboard, but it has all 12 function keys, a regular
inverted T for the cursor keys, a Fn key, a key for Menu, and all the Home,
PgUp, PgDn, End, Esc, Del, Ins, Backspace keys.  It is more like a small
laptop keyboard in design.

> There was someone on the list who was working on a way to connect a
> regular keyboard to the LX, but power was a problem. I emailed my
> suggestion, but never got a response.

Unfortunately a PS/2 keyboard cannot be made to work without a PS/2 to
serial conversion box, which is not cheap nor easily mobile due to it
needing power as well.

Cheers,
 Mack                            mailto:mack@times2tech.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 18:27:29 -0600
Reply-To:     jhope@enoinc.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "ENOINC - John S. Hope" <jhope@ENOINC.COM>
Subject:      Re: Re2: Retrofitting a Newton keyboard
In-Reply-To:  <1762.991123@times2tech.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

>Unfortunately a PS/2 keyboard cannot be made to work without a PS/2 to
>serial conversion box, which is not cheap nor easily mobile due to it
>needing power as well.

Where can I get a PS/2 to serial conversion box?  I would assume I would
need a driver as well to use a standard keyboard.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 18:41:16 -0600
Reply-To:     Mack Baggette <mack@times2tech.com>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mack Baggette <mack@TIMES2TECH.COM>
Organization: Times2 Tech
Subject:      Re4: Retrofitting a Newton keyboard
In-Reply-To:  <LOBBJHJCDIPKBKMLNMPHKEOFCFAA.jhope@enoinc.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

>>Unfortunately a PS/2 keyboard cannot be made to work without a PS/2 to
>>serial conversion box, which is not cheap nor easily mobile due to it
>>needing power as well.

> Where can I get a PS/2 to serial conversion box?  I would assume I would
> need a driver as well to use a standard keyboard.

I am not sure where you can get one these days. I bought one a few years
ago for around $150 or so from some company in England and it still needed
a driver for the palmtop, which I decided not to write at the time because
it wasn't a very cost effective solution.

Cheers,
 Mack                            mailto:mack@times2tech.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 18:53:49 -0600
Reply-To:     jhope@enoinc.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "ENOINC - John S. Hope" <jhope@ENOINC.COM>
Subject:      PS/2 Keyboard for 1000CX or 200LX
In-Reply-To:  <18778.991123@times2tech.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

Hello,

Does anyone know of a PS/2 or AT keyboard that will connect to a serial
port?  This would also require a DOS driver.  I remember seeing an ad for
one in an old PALMTOP Paper (old being 4-5 years ago).

Thanks...

-----Original Message-----
From: HPLX Mailing List mailto:HPLX-L@UCONNVM.UConn.EduOn Behalf Of
Mack Baggette
Sent: Tuesday, November 23, 1999 6:41 PM
To: HPLX-L@UCONNVM.UConn.Edu
Subject: Re4: Retrofitting a Newton keyboard


>>Unfortunately a PS/2 keyboard cannot be made to work without a PS/2 to
>>serial conversion box, which is not cheap nor easily mobile due to it
>>needing power as well.

> Where can I get a PS/2 to serial conversion box?  I would assume I would
> need a driver as well to use a standard keyboard.

I am not sure where you can get one these days. I bought one a few years
ago for around $150 or so from some company in England and it still needed
a driver for the palmtop, which I decided not to write at the time because
it wasn't a very cost effective solution.

Cheers,
 Mack                            mailto:mack@times2tech.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 17:20:31 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, pyarnell@PROAXIS.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paul Yarnell <pyarnell@PROAXIS.COM>
Subject:      Re: Plus-one disadvantage
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Tue, 23 Nov 1999 14:10:52 -0500, Lars Hedstroem <nxw988e@TNINET.SE> =
wrote:

nx> I have noticed one disadvantage with WWW/LX Plus.
nx>
nx> You can't open Lotus 123 when the memo editor is launched in Post.exe,=
often when I write an email I want to be able to open worksheets to reach =
information there.

If all you need to do is refer to a file Software Carosel would allow
you to open 123 in a different work area. Cut and paste is another
matter.....

Paul

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 19:42:48 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Need serial adaptor
Comments: To: russelllewis@delphi.com
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Tue, 23 Nov 1999 16:33:32 -0600 Russell Lewis
<russelllewis@DELPHI.COM> writes:
> So my question is, how do I connect an external modem to the serial
> port?  I have tried using the serial transfer cable with a null  modem
> adaptor attached, but I could not talk to the modem.  Is there a
special
> adaptor made that goes from the HPLX serial port into a standard
> serial port?

I am having the same problem and I though I knew the answer, so I would
be interested in the responses as well.   I did the above with same
result.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 18:34:15 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Buz Liteyr <buzz_liteyr@YAHOO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Buz Liteyr <buzz_liteyr@YAHOO.COM>
Subject:      DOS vers of ICQ?
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Recently I heard a rumor of a DOS version of ICQ.
Anyone aware of this and if so, of where it might be
found?  And of course, the obvious.. will it work with
the 200lx?

Thanks,
Buzz

__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 19:38:03 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: Need serial adaptor
Comments: To: d dv <ddvteach@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue, 23 Nov 1999 21:50:51 -0500 (EST)

Hi Domingo & Russell -

02h08m18s ago ...
On Tue, 23 Nov 1999, d dv wrote:

> On Tue, 23 Nov 1999 16:33:32 -0600 Russell Lewis
> <russelllewis@DELPHI.COM> writes:
> > I have tried using the serial transfer cable with a null  modem
> > adaptor attached, but I could not talk to the modem.  Is there a
> > special adaptor made that goes from the HPLX serial port into a =
standard
> > serial port?
>
> I am having the same problem and I though I knew the answer, so I would
> be interested in the responses as well.   I did the above with same
> result

1. AFAIK there is a special adapter in the HP Connectivity Kit.
2. If you can't get that, then use both a 9-pin gender changer & 9-pin
null-modem (both available at RadioShack - don't remember the part #s
though).  If your modem uses a 25 -pin connector, you'll also need a 9
to 25 pin adapter.  I used this cockamamie arrangement for a while,
then ordered an unterminated HP cable from the late EduCalc, and made
up a cable.

HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 20:46:37 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: DOS vers of ICQ?
In-Reply-To:  <19991124023415.21792.rocketmail@web601.yahoomail.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 23 Nov 1999, Buz Liteyr wrote:

> Recently I heard a rumor of a DOS version of ICQ. Anyone aware of this
> and if so, of where it might be found?  And of course, the obvious..
> will it work with the 200lx?

It does, but I have only been able to get it to "Instant message"
somebody, not to do a live chat.  Rod Whitby was looking at it a few weeks
back to see what could be done with it, but obviously it's not a high
priority for anybody who could do anything with it.  <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 04:41:51 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: Plus-one disadvantage
Comments: To: Lars Hedstroem <nxw988e@TNINET.SE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I have noticed one disadvantage with WWW/LX Plus.
>
> You can't open Lotus 123 when the memo editor is launched in Post.exe,often
>  when I write an email I want to be able to open worksheets to reach
>  information there.


Try opening Lotus before you launch Post altho, I would guess that there
will not be enough room that way either.  Software Carousel is probably
the answer as I'm not sure Maxdos will allow sysmgr/123 to run.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 00:42:32 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Need serial adaptor
Comments: To: peniel@web2000.net
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Tue, 23 Nov 1999 19:38:03 -0500 Peniel Romanelli <peniel@web2000.net>
writes:
> Tue, 23 Nov 1999 21:50:51 -0500 (EST)
>
> 2. If you can't get that, then use both a 9-pin gender changer &  9-pin
> null-modem (both available at RadioShack - don't remember the part  #s
> though)

I believe I did the above correctly, and no go.   Any other thoughts?

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 07:40:47 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Micq (was IRC/LX + ICQ?)

Tomas Moberg writes:
> > And if you don't strip it,how big is it then?

I just downloaded MICQ and tried it, really cool. (Wow factor: I can run ICQ
on my palmtop!)

The program is 180528 bytes plus a 1K text file with initialization strings
plus a log file if you want it. The rest of the package is dosppp and a dialer
program as well as documentation.

It worked straight off first time with the DOSPPP setup I already use for
LXTCP.



======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 20:22:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, qman@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Quinton Jones, Jr." <qman@EARTHLINK.NET>
Subject:      Re: Need serial adaptor
Comments: To: d dv <ddvteach@JUNO.COM>

Hi All,

I've been using this  same setup on my palmtop for as long as I can remember. without any problems.

What are your settings in Datacom set at?


----Original Message-----
 >On Tue, 23 Nov 1999 16:33:32 -0600 Russell Lewis
   ><russelllewis@DELPHI.COM> writes:
   >> So my question is, how do I connect an external modem to the serial
   >> port?  I have tried using the serial transfer cable with a null  modem
   >> adaptor attached, but I could not talk to the modem.  Is there a
   >special
   >> adaptor made that goes from the HPLX serial port into a standard
   >> serial port?
   >
   >I am having the same problem and I though I knew the answer, so I would
   >be interested in the responses as well.   I did the above with same  result.
   >
   >Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 00:19:14 -0800
Reply-To:     "conrad99@pacbell.net" <conrad99@pacbell.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Conrad Cox <conrad99@PACBELL.NET>
Organization: SF-MUG
Subject:      Re: FLUFF: A New Handheld
MIME-version: 1.0
Content-type: text/plain; charset="us-ascii"
Content-transfer-encoding: 7bit

Congratulations! I have one of those. Mine is almost 20 years
old, (g) but I remember the joy and wonder when we brought her
home. By the way, that soundcard ages, changing from a cry, to a
question, to a sweet voice asking for money (g).

Seriously, all the best to you and your family.

Conrad

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 02:33:42 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              lloo@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <lloo@WORLDNET.ATT.NET>
Subject:      Re: Need serial adaptor

   >> 2. If you can't get that, then use both a 9-pin gender changer &
   >>9-pin  null-modem (both available at RadioShack - don't remember
   >>the part  #s  though)
Message-Id: <19991124073334.ZLJB3446@12.72.155.235>
Date: Wed, 24 Nov 1999 07:33:34 +0000

   >I believe I did the above correctly, and no go.   Any other
   >thoughts?

I have the same arrangement as Peniel.  Zoom pocket modem is connected to a
9 pin null modem adapter, then a 9 pin gender changer, then the HP serial
cable to the LX.  Use this with NetTamer at 14400-19200 baud all the time.

- Longden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 08:00:50 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Ok. I've a Nokia 7110, and now?
Comments: To: abmenezes@mail.telepac.pt
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Antonio

> I've a new Nokia 7110 cellular phone with irda modem. Can you
> help me connecting it to my HP 200LX?

If you use WWW/LX you have to edit the www.cfg. Make a copy of it, so
that you can recover it if you make mistakes.

in the section ISP_PPP (that I guess you use?) set PORT=-1 (stands for
infrared port), BAUD=19200 (try also other values, 38400 for example),
MODEM=1 and enter the whole number of your ISP (incl. predial) behind
DIAL.

Then put the phone in the right position and try to connect.

Good luck!

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 09:50:32 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: FLUFF: A New Handheld
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Conrad,

> Congratulations! I have one of those. Mine is almost 20 years
> old, (g) but I remember the joy and wonder when we brought her
> home. By the way, that soundcard ages, changing from a cry, to a
> question, to a sweet voice asking for money (g).

We have five and all soundcards did and still do age as described
above. Great explanation.

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 09:11:35 -0000
Reply-To:     abmenezes@mail.telepac.pt
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
Subject:      Re: Ok. I've a Nokia 7110, and now?
In-Reply-To:  <199911240012.BAA29736@golf.dax.net>
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-1
Content-transfer-encoding: Quoted-printable

Thanks Martin

Yes. I've a licence to www/lx. I'll try to connect with the 7110
tomorrow (today I've a terrible cold and I don't know if I can make all
the mental effort needed to configure www/lx :>)

Furthermore my ISP doesn=B4t have a mobile access, so the call
would be mobile-fixed phone and very expensive. I'll have to
contract with another ISP for mobile Internet access. My cell phone
company is an ISP now and the access is free you only pay the
calls at mobile-mobile rates. I'll register for it (if they allow it as I
already have an access to them for fixed internet for my godson
who is living with me at the moment, you have to reduce costs you
know <G> and my ISP is a little expensive for the uses my godson
makes of the internet).

I bought the Nokia 7110 yesterday for USD $411 (NOK 9,787). It
arrived in Portugal this week. I was passing by my usual cell phone
supplier and saw it in display and couldn=B4t resist (well the pursache
was already planned). It cames with a CD-ROM with drivers for M$
Windows 95/98 and CE and instructions for use with a PSION.

Regards

Antonio

On 24 Nov 99, at 1:12, Martin Bergvill wrote:

>
> Damn it.. I thought that I would be the first with a Hplx and a 7110.
> I am still waiting for mine :-))
>
> Well first of all you need www/lx and a licence. If you already have
> then you read the manual. I think it is something about irda there in
> the latest version. The 7110 should work as the 8810.
>
> You need to create a new "profile" with Port=3D-1 and thats it. It
> should show "Irda" on the top line when in Post/lx.
>
> But be aware that the Hplx have a shielding problem. It is not
> shielded good enough against the rf noise the gsm makes. This is
> something that are worked on at this moment by several members of this
> list.
>
> Please report to the list about how you are doing..I can`t wait to get
> my 7110..
>
> (Hal could you hurry to send my Hplx back to mee:-) (I have just sent
> it over :-)
>
> --



---------------------------------------------------------
Antonio Queiroz Menezes M.Sc. (Econo)
Porto - Portugal
Cell Phone + 351 91 7555590
Work + 351 22 9981532 (direct, from 9 a.m. to 6 p.m., local time)
abmenezes@mail.telepac.pt
AntonioMenezes@compuserve.com
aameneze@aep.mailpac.pt  (work)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 01:44:18 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: Please help if you can!
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Laurence Harvey wrote:
>
> Daniel wrote:
> >what that part inside the palmtop could be:
> >It is a SMD part, 2 contacts, abt. 1mm*2mm, color is somewhat between
> >brown and yellow, and a code is on its surface:
> >_
> >KA4 (the K has an overline)
> >
> >is it possible that it is a diode? or a capacitor? or even a resistor?
>
> I think your estimate of size is inaccurate, or your eyes very good if you
> can read text on a 1mm * 2mm component.
>
> If the component is nearer 2mm *4mm then there are probably two options.
>
> If it is a light brown with silver tips, it is probably a ceramic capacitor
> and I think this is probably what you have, especially if you do not get any
> readings when testing it.
>
> If it is dark brown (or black) with smaller silver tips, it is probably a
> resistor, and there are normally marked with a three digit number - the
> value of the resistor
>
> The other common two contact component is yellow, but with light brown lines
> at one end, these are polarised electrolytic capacitors, and there are many
> different sizes of these in the Palmtop.
>
> I my experience diodes are either cylindrical in shape or if rectangular,
> have a white polarising mark/line at one end.
>
> I do not have my Palmtop in pieces at the moment so cannot identify the
> exact component you refer to but I hope this helps
>
> Laurence

To nitpick:  Don't forget SOT-23 diodes, those aren't unpopular <G>
(For those non-tech's, those're those little black blocks with 2 leads
on one side and 1 in the middle on the other, which doesn't sound like
the part they're describing here, at all.)  I too am guessing that it's
a cap, unless they're getting a resistance across it when de-soldered &
removed from the circuit.  I'd still like a pointer to where this part
IS, guys, so I can look on my momboard.

(Also, a magnifier does help when looking at SMD parts for numbering,
and good light's GOOD also.  A microscope's handy, if you have one
that's right for the job.)  It can be hard to get A's vs. 4's straight,
etc.

My HP200LX machine's still apart here (I ended up spending *hours*
today, helping my dad with his pickup, it's being a nasty pain!, didn't
get home until too late after chasing problems down (It'd somehow gotten
to 23 degrees ahead of TDC in it's timing, so wouldn't start?!
Weirdness.  Distributors aren't *supposed* to self-adjust...  Then it
shut down again on him, soon as I got 30+ miles away, messed up my day
badly.)

  Mark

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 10:41:33 +0100
Reply-To:     Paulo.Custodio@alcatel.de
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@ALCATEL.DE>
Organization: Alcatel
Subject:      Re: PE/PIM on PALRUN
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Here follows the answer from Hans Peter Staber:

Hans Peter Staber wrote:
>
> Paulo,
>
> > I am running PE/PIM on a Win95 machine with PALRUN in full-screen mode.
>
> Try using the video switches of palrun - check the docs. Other than that you
> should download the palrun version at ftp.dasoft.com - Andreas modified it to
> fit problems mysecretary had on her WIN NT :-)
>
> HP Staber/Salzburg


Could the newer 1.04 version of PALRUN be put on SUPER, or the 1.03 that
exists there be removed?

Paulo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 10:43:25 +0100
Reply-To:     Paulo.Custodio@alcatel.de
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paulo Custodio <Paulo.Custodio@ALCATEL.DE>
Organization: Alcatel
Subject:      PE/PIM on PALRUN and code page 850
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Is there any way to make PALRUN display characters in the code page 850?
Currently I get accented letters converted to graphic characters.

I am running PE/PIM on a Win95 machine with PALRUN in full-screen mode.

Thanks in advance,
Paulo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 02:08:05 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: PS/2 Keyboard for 1000CX or 200LX
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Could make a PIC-based PS/2 to Serial keyboard adapter, with some work,
and a driver for that to fit on the 200Lx, power is a problem though (AT
type keyboards usually eat ~ 200 mA roughly at 5V, a lot more than you
want to feed it from your LX!)  Would have to get the programming
correct on the PIC microcontroller, which would take a little work.
It's a simple unit, would cost about $25ish or so to make & sell, but
take some time to make.

Could put batteries in the PS/2 to serial converter and power converter
and keyboard from those, or put both inside the keyboard, then run a
different cable to the LX, which would be a good way to go;  I'd sort of
thought of having a keyboard that the 200Lx sat on top of, have the LC
sort of "dock into" the keyboard, and run the 200Lx off the same
batteries while docked there, that'd be sort of nice.  It'd be a light
laptop, at that.  And a lot faster to type on <G>

One thing's improved here, at least - The PIC based PS/2 to serial
converters don't eat much power at all, unlike past versions.  (You
could run one off of a 9V battery or even 3 AA batteries for about a
year, at a guess?  Or just "siphon" power off the 200LX's serial port,
fairly easily done.)  The keyboard's a power hog, though, if you get an
older desktop keyboard - some newer laptop keyboards could use far less
power, and I imagine with the Energy Star program, newer keyboards do
use less power.

(I should meter out current usage for some of these new keyboards <G>)

  Mark

ENOINC - John S. Hope wrote:
>
> Hello,
>
> Does anyone know of a PS/2 or AT keyboard that will connect to a serial
> port?  This would also require a DOS driver.  I remember seeing an ad for
> one in an old PALMTOP Paper (old being 4-5 years ago).
>
> Thanks...
>
> -----Original Message-----
> From: HPLX Mailing List mailto:HPLX-L@UCONNVM.UConn.EduOn Behalf Of
> Mack Baggette
> Sent: Tuesday, November 23, 1999 6:41 PM
> To: HPLX-L@UCONNVM.UConn.Edu
> Subject: Re4: Retrofitting a Newton keyboard
>
> >>Unfortunately a PS/2 keyboard cannot be made to work without a PS/2 to
> >>serial conversion box, which is not cheap nor easily mobile due to it
> >>needing power as well.
>
> > Where can I get a PS/2 to serial conversion box?  I would assume I would
> > need a driver as well to use a standard keyboard.
>
> I am not sure where you can get one these days. I bought one a few years
> ago for around $150 or so from some company in England and it still needed
> a driver for the palmtop, which I decided not to write at the time because
> it wasn't a very cost effective solution.
>
> Cheers,
>  Mack                            mailto:mack@times2tech.com
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 21:46:03 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Paul Johnson <paulj@SILCHIP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Paul Johnson <paulj@SILCHIP.COM.AU>
Subject:      Fwd: RE: tides & currents for DOS
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Nautical Software replied about Tides & Currents for DOS. $79 (US I
presume) is more than I wanted to spend but I thought someone else
might be interested. If their windows software is any guide, it must be
an impressive package.


I tried out Tide24.zip from

http://vancouver-webpages.com/peter/index.html

and it seems suitable for my needs. I just need  to know when tides
will be high or low for river mouths when bushwalking on the coast,
and the occasional hiring of a seakayak so I know when mangroves are
accessable. It runs quite happily on a double speed 200lx. It gave
results very close to published tide predictions for Sydney and the
east coast of Australia. Out of curiosity I tried it for areas like
Darwin and Thursday Island where tides do strange things. Rather than
give an incorrect result it refused to give any. I don't mean it
stopped working, it just said it couldn't possibly work that out.

Bye, Paul Johnson.

--- begin of forwarded message ---

From: Josh Harman <Josh.Harman@nobeltec.com>
To: 'Paul Johnson' <paulj@silchip.com.au>
Subject: RE: tides & currents for DOS
Date: Mon, 22 Nov 1999 16:34:21 -0800

Paul,

We still sell Tides & Currents for DOS, and it sells for $79.00.  If you
would like to order a copy, please give me a call at (800) 946-2877 and I
can help you place an order.  If you have any further questions, please feel
free to e-mail me directly at josh@tides.com.

Thanks,

Josh Harman
Nobeltec-Nautical Software
www.tides.com

-----Original Message-----
From: Paul Johnson mailto:paulj@silchip.com.au
Sent: Sunday, November 21, 1999 5:57 AM
To: info@tides.com
Subject: tides & currents for DOS


Hello,

Do you still sell a version of Tides & Currents for DOS ?
I couldn't see any mention of it on your website.

Thanks, Paul Johnson.
--- end of forwarded message ---

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 12:22:41 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Java- and Javascripts questions
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>From a security point of view, Perl is exactly what you called JavaScript
>because there is rarely another language, especially in CGI scripts, that
>has caused more vulnerabilities than Perl.

Do you have an example?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 12:24:52 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Plus-one disadvantage
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Did you already fiddle around with the DOS memory amount you gave WWW/LX?

-----Original Message-----
From: Lars Hedstroem <nxw988e@TNINET.SE>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Dienstag, 23. November 1999 20:11
Subject: Plus-one disadvantage


You can't open Lotus 123 when the memo editor is launched in Post.exe,often
when I write an email I want to be able to open worksheets to reach
information there.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 12:32:56 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Plus-one disadvantage
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>> You can't open Lotus 123 when the memo editor is launched in Post.exe

How about to use a simple 123-viewer (not 123 himself) to do this?
Is there an EXM-WK1-viewer around? Then would Cut'nPaste perhaps work.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 23 Nov 1999 21:07:00 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Blackburn <Mike.Blackburn@QUEBECORUSA.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Blackburn <Mike.Blackburn@QUEBECORUSA.COM>
Subject:      Re2: Need serial adaptor
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

HP has a cable in their connectivity kit, and there is some hp software that
runs on PC's to make your file manager connect to a "file manager" in the PC
through the connectivity cable or through the IR port.  Can you configure an IR
port on your PC?  I don't know where the software came from, but I've got it.

Mike

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 07:59:11 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Darren Frick <dfrick@SNIP.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Darren Frick <dfrick@SNIP.NET>
Subject:      Re: Need serial adaptor
In-Reply-To:  <199910231633.PNR03203@delphi.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> port?  I have tried using the serial transfer cable with a null modem
> adaptor attached, but I could not talk to the modem.  Is there a special
> adaptor made that goes from the HPLX serial port into a standard serial
> port?

Russ, the Lx serial port is standard, but for one extra ground pin, so
that's ok. Also, if you are using the serial transfer cable, then you are
correct in adding a null-modem adapter. Maybe you are using the printer
cable?

Maybe try with and without the null adapter. Also, try entering at the DOS
prompt: "serctl /w" to turn on the port, and make sure all software is set
to com 1 (the PCMCIA modem is com 2).

Darren.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 13:36:36 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Need serial adaptor
Comments: To: russelllewis@delphi.com
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi,

> So my question is, how do I connect an external modem to the serial
> port?  I have tried using the serial transfer cable with a null modem
> adaptor attached, but I could not talk to the modem.  Is there a special
> adaptor made that goes from the HPLX serial port into a standard serial
> port?

Your combination should work.
Are you sure that your serial port was powered?
You can use Stefan Peichl's 'LXPRO' (you find it on SUPER) to set the
serial port manually to 'COM1' and 'WIRE'. And you can set the port
speed and other parameters.

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 13:36:39 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Please help if you can!
Comments: To: Laurence Harvey <lharvey@CALLNETUK.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Laurence,

Thanks for your help!

> I think your estimate of size is inaccurate, or your eyes very good if you
> can read text on a 1mm * 2mm component.

I used a magnifying glass - and the component is _really_ 1mm*2mm - I
measured it! :-)

> If it is a light brown with silver tips, it is probably a ceramic capacitor
> and I think this is probably what you have, especially if you do not get any
> readings when testing it.

I think that is the case.

> If it is dark brown (or black) with smaller silver tips, it is probably a
> resistor, and there are normally marked with a three digit number - the
> value of the resistor

No. Neither dark brown nor black nor a 3-digit-number.

> The other common two contact component is yellow, but with light brown lines
> at one end, these are polarised electrolytic capacitors, and there are many
> different sizes of these in the Palmtop.

Yes- but this one is different.

> I my experience diodes are either cylindrical in shape or if rectangular,
> have a white polarising mark/line at one end.

No again. No marking at one contact.

> I do not have my Palmtop in pieces at the moment so cannot identify the
> exact component you refer to but I hope this helps

I send you two pictures to your priveate email - one contains a
high-resolution photo of the circuit, the other one shows the board
layout with numbers. The nr 7 is this one we are speaking about.

GTX
daniel


--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 14:37:55 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      Re: Drowning the display: self-inflicted sorrows
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi all,

Avi Meshar wrote:

>This is a tool we use for debugging purposes only. It is
>not for normal usage....

>So please, I plead with you all - do not send logs to us if
>you have problems with WWW/LX Plus....

>If you have an uncontrollable need :-) to produce logs
><ROFL> and send them somewhere I would like to offer to
>you the following excellent email Address:
>
>     Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
>
>If you send logs to that address, make sure to send the
>same log three or four times, just for fun :) I know
>Winfried is going to be delighted to receive as many logs
>as possible, to fill up his email box and make him happy...

All I can say is that I am sorry to have drawn the menace of
logs onto Avi and his wrath onto me. I just thought this code
was another bit of undocumented stuff D&A releases from time to
time to help users to solve specific problems (FIFO=3D1 etc. I
do not mention more for fear they might be classified).

Please, forget that three letter word (I will never mention it
again). If you cannot, "enjoy" the logs privately, not with
Avi, and with me either. My previous posts are proof enough
that I hate logs as much as Avi (though for different
reasons), and your sending of logs to me would make matters
worse, as I probably <sigh, grin> would have to ask him for
technical advice <grin, sigh, groan>.

Winfried

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 08:45:58 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Terry Livingston <docliv@KIVA.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Terry Livingston <docliv@KIVA.NET>
Subject:      hard drive question
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Hi,
    Please forgive me for the off topic bandwidth, but this group is where
I go for advice on all computers, not just the 200lx. I have followed the
list long enough to know we have some very tech minded users.
I have had a hard drive (western digital) go bad (clicking, heads gone)
I've been told that the clicking is prelude to a head crash, and the drive
won't boot up.
I have backups of all but one file (yes, I would like that file)
It's not worth data recovery (too expensive), but I would be willing to
experiment with transplanting another set of heads in this bad drive to try
and read the platters.
My questions is  "Is this possible ?" (I can see some of you laughing
already)
Have any of you done anything like this ?,  what precautions should I take
to not scratch the platters,  Drive spins up okay, so if I could just get
it to read for a little bit, I would be home free. Is it possible to swap
parts from a identical functioning drive and do this ?  Any advice and or
info you all could provide would be appreciated.  Feel free to call me
stupid, but if the drive is already bad, I can't do much more harm before
it hits the trash can.
Thanks in advance for your replys.  If you feel it's too much off topic
(and it is) please email me privately (docliv@kiva.net)  Thanks

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 09:49:34 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Fwd: WTB: LX in UK
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Sorry if this a multiple post...I'm not getting an echo meSage to my
EMail...AJKind

--- begin of forwarded message ---

Date: Wed, 24 Nov 1999 09:26:26 -0500
To: MCHEM1@UCONNVM.UCONN.EDU
From: james@gordian-knot.com (James Winder)
Subject: HPLX-L Form Response


> Subscriber Comments: I am trying to purchase some HP200LX's in the UK
> but can't find a vendor with stock.  Can anyone help.  Second hand
> would be OK.

--- end of forwarded message ---
*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 09:50:58 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              james@GORDIAN-KNOT.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         James Winder <james@GORDIAN-KNOT.COM>
Subject:      Fwd: WTB: LX in UK?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

--- begin of forwarded message ---

Date: Wed, 24 Nov 1999 09:26:26 -0500
To: MCHEM1@UCONNVM.UCONN.EDU
From: james@gordian-knot.com (James Winder)
Subject: HPLX-L Form Response


> Subscriber Comments: I am trying to purchase some HP200LX's in the UK
> but can't find a vendor with stock.  Can anyone help.  Second hand
> would be OK.

--- end of forwarded message ---
*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 07:32:26 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: Need serial adaptor
Comments: To: d dv <ddvteach@juno.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Wed, 24 Nov 1999 09:41:16 -0500 (EST)

Hi Domingo & group -

11h18m36s ago ...
On Tue, 23 Nov 1999, d dv wrote:

> > 2. If you can't get that, then use both a 9-pin gender changer &  =
9-pin
> > null-modem

> I believe I did the above correctly, and no go.   Any other thoughts?

No terribly original ideas...  A couple of folks suggested making sure
that port 1 is selected, and is powered up.  Also try different port
speeds.  Some modems can be fussy about port speeds.  Before making the
custom cable, I used the multi-adapter arrangement successfully with
COMMO, NetTamer, and WWW/LX - and also with rodents & trackballs.

You can use serctl /w to turn on the port, or, even better, get Stefan
Peichl's setcom1 from SUPER.

BTW - just took a look at my RS adapters, and the part #s aren't marked
on 'em.


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 07:54:35 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Ser. port - adapters - modem
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Wed, 24 Nov 1999 10:09:36 -0500 (EST)

Hi again folks -

Another thing occurred to me about connecting to a modem thru port 1.
If you're using datacomm or another terminal program, make sure it's
set for hardware flow control (RTS-CTS), not software control
(XON_XOFF).


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 09:22:26 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: WTB: LX in UK?
Comments: To: "james@GORDIAN-KNOT.COM" <james@GORDIAN-KNOT.COM>
Comments: cc: Wayne Kneeskern <wayne_kneeskern@thaddeus.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"

> I am trying to purchase some HP200LX's in the UK
> but can't find a vendor with stock.  Can anyone help.  Second hand
> would be OK.

We (Thaddeus Computing) http:\\www.palmtoppaper.com still have new 200LX's
in stock. We are currently out of used units.  We expect to have enough new
ones to last through January, but there is no way to tell for sure.  When
they are gone they are gone.

Note that while we sell 4 meg 200LX as is direct from HP, we will only sell
the 2 meg with one of our double speed, extra memory upgrades.

Finally, anyone who is willing to deposit $500 -- we will hold a new 200LX
for when we will be able to backlight it.  We expect to offer backlight,
sometime first quarter 2000 for a $199 upgrade charge.  If we cannot deliver
backlight in that timeframe, we will refund the deposit.

Our normal shipping charge in the U.S. is $9.50 and outside U.S. $35.
However, on multiple unit sales we can ship at the actual shipping cost.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 09:25:33 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Hal Goldstein <hal_goldstein@THADDEUS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hal Goldstein <hal_goldstein@THADDEUS.COM>
Subject:      Re: Retrofitting a Newton keyboard
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"

<<Do your solutions involve modifying a keyboard, or just the cable?>>

Depending on costs we hope to modify the keyboard so the HP cable just
works.  Mack will write the driver.

<<I wonder because I have a small PS2 keyboard made for the Dauphin
portable. It's a bit bigger than the Newton, 24cm x 14cm vs. 26x10, but it
has some extra keys the Newton lacks (Function, escape, an extra key that
could possibly be used for Menu).>>

That sounds like one of the keyboards we looked at --- we are working
directly with the actual manufacturer.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 10:31:42 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bill Schell <bill@BELL-LABS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bill Schell <bill@BELL-LABS.COM>
Subject:      very cool folding keyboard
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

http://www.thinkoutside.com/

This is a unique folding keyboard for the Pilot.  It was on the cover of
Portable Desgin magazine this month.  Anybody want to figure out how to
interface it to a 200LX?  I know people have adapted the Pilot modem
to a 200LX.  This would be similar.   It's not out until early next year, though.

Bill Schell
Lucent Technologies, Bell Labs, Murray Hill, NJ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 12:42:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bruce_Martin@MANULIFE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bruce Martin <Bruce_Martin@MANULIFE.COM>
Subject:      Re: Need serial adaptor
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

> > I have tried using the serial transfer cable with a null  modem
> > adaptor attached, but I could not talk to the modem.  Is there a
> > special adaptor made that goes from the HPLX serial port into a =
standard
> > serial port?
>
> I am having the same problem and I though I knew the answer, so I would
> be interested in the responses as well.   I did the above with same
> result
>
It seems like your cabling *should* work...

Did you remember to tell your comm program to now look for the modem on COM1:
(the LX serial port) instead of COM2: (the PC-Card slot)?

Bruce in Toronto

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 12:47:46 -0500
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Plus-one disadvantage
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Goeldie wrote:

Did you already fiddle around with the DOS memory amount you gave WWW/LX?


Well,I have maximum system RAM in the setup and have also prefaced the=
 Card Installation Client inthe autoexec.bat file with REM,gave me,if=
 I recall right,further 17k,wasn't enough anyway.If it is this you are=
 refering to?

Concerning cut/copy/paste I am still waiting for the invention to cut/copy/=
paste from more than one location into one spot in one run,I hope you=
 understand what I mean.

BTW,do you speak Schw=FCtzerdeutsch?I still remember back in highschool=
 there was one chapter(it was enough:-)) about this dialect,almost impossib=
le to understand!Wenigtens es zu aufh=F6ren,kann man so sagen?Ich habe=
 so viel vergessen...

Lars Hedstroem/Schweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 08:28:21 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: Need serial adaptor
Comments: To: russelllewis@delphi.com

Russell Lewis writes:
> So my question is, how do I connect an external modem to the serial
> port?  I have tried using the serial transfer cable with a null modem
> adaptor attached, but I could not talk to the modem.  Is there a special
> adaptor made that goes from the HPLX serial port into a standard serial
> port?

I use PNR & LXTCP with an external modem. I just connected it to the HP serial
cable using the male<->male 9 pin adaptor and it worked! I would suggest
first starting up datacomm, checking your communications settings and typing
A T Z and <enter> (without spaces between the characters). If you get an answer
"OK" from the modem, it means that you palmtop is connected to the modem.

Next go into Setup (Ctrl-Filer) and check that the Comm port is enabled under
DOS. If you want to save power and not enable it always, in DIAL.BAT add the
line:
serctl /w
to the start of dialing and the line
serctl /o
to the end of the hangup portion.
(Serctl enables and disables the serial port. It is found on your d: drive)

This is as far as the initial setup goes.

Tell us how you fare.


======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 18:59:04 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Decrypting satellite TV chanels with hp200lx - succes!
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

This is neat!
I have gotten the hp200lx to decrypt all the Cable TV chanels that is
recived via satellite!

I connected a smartcard adapter ($20) to the hp200lx com1 and inserted
the card in the satelite decrypt reciver. On the hp200lx I had a
program called Voyager (www.d2mac.com i think) with the latest keys.

To my surprise it worked right away!
TV1000 Chanel+, MTV, You name it.

This is illegal! I tried it on with friend who already had these
chanels, wich should be alright.
I myself do not own a satelite dish - I only whanted to see what could
be done with a hp200lx.

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 14:23:11 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Need serial adaptor
Comments: To: davidb@netmedia.net.il
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Wed, 24 Nov 1999 08:28:21 +1000 David Becher <davidb@NETMEDIA.NET.IL>
writes:
> I use PNR & LXTCP with an external modem. I just connected it to the
HP serial
> cable using the male<->male 9 pin adaptor and it worked! I would
suggest

You don't mean the straight male to male adaptor, but the null modem one,
right?

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 13:35:50 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Robert Hocking <hocking@FLASH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Robert Hocking <hocking@FLASH.NET>
Subject:      Re: Need serial adaptor
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> So my question is, how do I connect an external modem to the serial
> port?  I have tried using the serial transfer cable with a null modem
> adaptor attached, but I could not talk to the modem.  Is there a =
special
> adaptor made that goes from the HPLX serial port into a standard serial
> port?
>
> Thanks.

I just had David Shier, from Shier Systems, make me a custom
cable, about a month ago, that has the small connectivity cable
end, that plugs into the palmtop, on one end, and a 9 pin serial
end on the other, and the cable is wired as a null modem cable.
I had this made because I was going to use it with a Qualcomm
cell phone I had just bought, but took the phone back before I
received the cable from Shier.

I was using a null modem adapter that was on one end of my
connectivity cable, and my cell phone cable plugged into the
other end.  I had to use various gender changers to plug the two
cables together.  The two cables, the null modem adapter, and
gender adapters made quite a long cable assembly.  The cable
shier made was less than 12" long, so it cut out a larger length
of the standard connectivity cable.

In fairness, I did not want to attempt to send the custom cable
back to Shier, just because I no longer needed it anymore, so I
figured that someday I would either use it for something else,
or someone else might need it.  I will have to look how much I
exactly I paid for it, if I recall it was like $30 or $35, and if
your interested let me know, and I would be happy to sell it.

Robert Hocking

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 14:42:45 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Need serial adaptor
Comments: To: davidb@netmedia.net.il
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

On Wed, 24 Nov 1999 08:28:21 +1000 David Becher <davidb@NETMEDIA.NET.IL>
writes:
> I use PNR & LXTCP with an external modem. I just connected it to the
HP serial
> cable using the male<->male 9 pin adaptor and it worked! I would
suggest
> first starting up datacomm, checking your communications settings  and
typing
> A T Z and <enter> (without spaces between the characters). If you  get
an answer
> "OK" from the modem, it means that you palmtop is connected to the
> modem.

I forgot to mention, when I start datacom (com1, 8 dt, 1 sb, np) nothing
happens (it will not let me type anything on th screen.   I am currently
suspecting a bad modem (I bought it used from ebay).

When I connect it to my Win95 desktop, lights flash, like something is
going on, but win95 cannot identify the modem.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 17:31:11 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Agrajag <agrajag@MEDIAONE.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Agrajag <agrajag@MEDIAONE.NET>
Subject:      Re: DOS vers of ICQ?
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I've found that a good way to do ICQ on a palmtop is to get a shell account
at freeshell.org and use their built in ICQ client, this way, you only have
to run your telnet program, not an ICQ program, plus while in the remote
unix environment you can do many other things at the same time with no slow
down.

  -Agrajag

"Time is viewed in the information age as a commodity that can be bought,
sold, traded and generally controlled at will."

"I'm really totally together, I even think I should be."

----- Original Message -----
From: "David Sargeant" <david@HPLX.NET>
To: <HPLX-L@UCONNVM.UCONN.EDU>
Sent: Tuesday, November 23, 1999 11:46 PM
Subject: Re: DOS vers of ICQ?


| On Tue, 23 Nov 1999, Buz Liteyr wrote:
|
| > Recently I heard a rumor of a DOS version of ICQ. Anyone aware of this
| > and if so, of where it might be found?  And of course, the obvious..
| > will it work with the 200lx?
|
| It does, but I have only been able to get it to "Instant message"
| somebody, not to do a live chat.  Rod Whitby was looking at it a few weeks
| back to see what could be done with it, but obviously it's not a high
| priority for anybody who could do anything with it.  <g>
|
| ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
|

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 16:04:47 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: hard drive question
Comments: To: Terry Livingston <docliv@KIVA.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Open up the drive and see it the head is stuck against the
wall of the case. If it is push it loose, close the case
power up and see if now you can grab your file. I've done
this to 3 drives over the years.

Terry Livingston wrote:
>
> Hi,
>     Please forgive me for the off topic bandwidth, but this group is where
> I go for advice on all computers, not just the 200lx. I have followed the
> list long enough to know we have some very tech minded users.
> I have had a hard drive (western digital) go bad (clicking, heads gone)
> I've been told that the clicking is prelude to a head crash, and the drive
> won't boot up.
> I have backups of all but one file (yes, I would like that file)
> It's not worth data recovery (too expensive), but I would be willing to
> experiment with transplanting another set of heads in this bad drive to try
> and read the platters.
> My questions is  "Is this possible ?" (I can see some of you laughing
> already)
> Have any of you done anything like this ?,  what precautions should I take
> to not scratch the platters,  Drive spins up okay, so if I could just get
> it to read for a little bit, I would be home free. Is it possible to swap
> parts from a identical functioning drive and do this ?  Any advice and or
> info you all could provide would be appreciated.  Feel free to call me
> stupid, but if the drive is already bad, I can't do much more harm before
> it hits the trash can.
> Thanks in advance for your replys.  If you feel it's too much off topic
> (and it is) please email me privately (docliv@kiva.net)  Thanks
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 10:15:02 +0800
Reply-To:     JIMMY TAN <jimmytan@yeos.com.my>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         JIMMY TAN <jimmytan@YEOS.COM.MY>
Subject:      HP-12C Calculator
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Anybody familiar with the HP-12C Business/Financial calculator? I understand it
operates only in RPN mode. I have a friend who is shopping around for one for
his exam, so I thought of convincing him to get a 200LX instead (new or second
hand) and use the built-in HP Calculator. Does the built-in calculator have
EVERYTHING that the HP-12C has?
Appreciate any advice.

Thanks.

Jimmy.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 17:47:14 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: hard drive question
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Oh, forgot to say dump the drive as soon as you get the data
as all the dust that you don't see that gets into it will
cause random data loss even if the head doesn't hang up
again.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 17:48:36 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: 1000cx software?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

There were several excellent and informative posts on the
way to connect PC to 1000CX. I think ZIP, Transfile, LLRA,
LapLink, Interlnk/Intersvr were all mentioned.

In one of the posts there was a bit of a confusion: LLRA
and LapLink Remote are two separate products, from the same
company, doing more or less the same function, and
unfortunately, use a similar name.

The worst part: LLRA will not talk to LapLink.

LapLink 4.5 is the latest version that works on the Palmtop
if memory serves. It has a "self-installing mode" which
means you run it on the PC and connect the two machines,
then tell it to connect and install itself on the Palmtop.
It will find its way to the serial port, and provide the
user with the commands to type ON THE PALMTOP to make the
serial port connect, then move itself across the link, and
voila! LapLink installed on the palmtop. Works GREAT!

LLRA is simply a pig. It is huge, slow, and in the palmtop
requires a huge memory penalty, since it runs as a TSR. I
believe there is no way to make LLRA work under NT (?).
LapLink is nimble and runs very well.

The problems encountered with LapLink, as with other
programs that run on the PC under Windhose is that
Windhose takes a patriarchal attirude towards you - it
knows better :-( and messes with the serial port, denying
a DOS program in many case the use of the serial port.
There are several ways to beat down Windhose into
submission, but this is a "whole nother subject..." so to
speak.

I used Interlnk/Intersvr replication and LapLink on a
1000CX - works just fine, once you bang Windhose into being
somwhat sensible. It is a snap on DOS PCs, of course.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 20:52:10 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              d dv <ddvteach@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         d dv <ddvteach@JUNO.COM>
Subject:      Re: Need serial adaptor
Comments: To: hocking@FLASH.NET
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

Hi everyone.   I am now the happy owner of a fully operational portable
modem.   In desperation, I went out and bought another null modem
adapter, and now it my modem works!   Either I was misled, or there is no
easy way to tell if an adaptor and cables are indeed null modem or just
serial.    Either way, I hope Russell found a solution to his problem
like I did for mine!

Domingo


On Wed, 24 Nov 1999 13:35:50 -0600 Robert Hocking <hocking@FLASH.NET>
writes:
> In fairness, I did not want to attempt to send the custom cable
> back to Shier, just because I no longer needed it anymore, so I
> figured that someday I would either use it for something else,
> or someone else might need it.  I will have to look how much I
> exactly I paid for it, if I recall it was like $30 or $35, and if
> your interested let me know, and I would be happy to sell it.

Thanks for your offer, but my 9 pin null modem adaptor plus 9 pin male to
male adaptor are only a few inches long together, and they cost $5 each
at Radio Shack.

Domingo

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 19:32:10 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      95lx info sought
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Folks,

Is there a 95lx user who could do a test for me?  If so go
to my web page


http://skyscraper.fortunecity.com/monitor/813/

and d/l the THEOCRATIC TIME TRACKER (3.4) program and see if
it can run on a 95lx.

I don't have a 95lx but there is one for sale cheap in my
area. A friend asked if this program will work as that and
the appointment book are her main reasons for being
interested a palmtop.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 20:16:33 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      from notetaker to??
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Anyone know of a tool to convert a notetaker file into
something that can be read  on a WinCE machine?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 22:22:14 -0600
Reply-To:     russelllewis@delphi.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russell Lewis <russelllewis@DELPHI.COM>
Subject:      Re: Need serial adaptor
Comments: To: David Becher <davidb@netmedia.net.il>

Hi David,

Thanks for your reply. I did manage to finally get it
working. It was using the TSR program LXPRO to turn the port
on and off.  It took me awhile before I got it right.

Next question: Where can I find a short adapter to go from
the LX's serial port to a standard serial.  All I have now
is the transfer cable.

Thanks.


David Becher writes:
> Russell Lewis writes:
> > So my question is, how do I connect an external modem to the serial
> > port?  I have tried using the serial transfer cable with a null modem
> > adaptor attached, but I could not talk to the modem.  Is there a special
> > adaptor made that goes from the HPLX serial port into a standard serial
> > port?
>
> I use PNR & LXTCP with an external modem. I just connected it to the HP serial
> cable using the male<->male 9 pin adaptor and it worked! I would suggest
> first starting up datacomm, checking your communications settings and typing
> A T Z and <enter> (without spaces between the characters). If you get an answer
> "OK" from the modem, it means that you palmtop is connected to the modem.
>
> Next go into Setup (Ctrl-Filer) and check that the Comm port is enabled under
> DOS. If you want to save power and not enable it always, in DIAL.BAT add the
> line:
> serctl /w
> to the start of dialing and the line
> serctl /o
> to the end of the hangup portion.
> (Serctl enables and disables the serial port. It is found on your d: drive)
>
> This is as far as the initial setup goes.
>
> Tell us how you fare.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 00:06:15 -0500
Reply-To:     Agrajag <Agrajag@mediaone.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Agrajag <Agrajag@MEDIAONE.NET>
Subject:      BeOS transfer
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-2022-jp
Content-Transfer-Encoding: 7bit

does anyone know if there is a simple program out there that I can use to
transfer from my 200 to my BeOS desktop??  I am able to get a connection
using the standard SerialConnection utility, but it is rather useless becuase
it does not have good capture capabilities, and only will work in text mode (
==no x/y/zmodem or Kermit support).  Thanks in advance to anyone that can
help out

  -Agrajag

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 24 Nov 1999 23:18:12 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <swdowell@BELLSOUTH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <swdowell@BELLSOUTH.NET>
Subject:      Re: from notetaker to??
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Patrick,
From Notetaker press shift/space to select all the records, then do a
smartclip on all the fields (if thats what you want). Then go to File/Print
and select Custom, Print to File. Hit OK, and name your file. That should
create a text file that should be readable on a CE device (I think). Give it
try.

Steve

----- Original Message -----
From: Patrick West <patrickwest@USWEST.NET>
> Anyone know of a tool to convert a notetaker file into
> something that can be read  on a WinCE machine?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 07:15:46 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Ok. I've a Nokia 7110, and now?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 24 Nov 1999 08:38:57 -0800, Antonio Queiroz Menezes <abmenezes@mail.telepac.pt> wrote:

> Thanks Martin
>
> Yes. I've a licence to www/lx. I'll try to connect with the 7110
> tomorrow (today I've a terrible cold and I don't know if I can make all
> the mental effort needed to configure www/lx :>)

Should my fairly easy.. You could either alter the settings you have as
Daniel suggested or you can create a new setting.

Please report to the list how you are doing. I am very interested to
hear how it works with the Hplx.

> I bought the Nokia 7110 yesterday for USD $411 (NOK 9,787). It
> arrived in Portugal this week.

Hmm USD$411 is about 3288,- NOK and not 9787,- Nok. I have paid about
3300,- Nok for mine which I have not recevied..

> (well the pursache
> was already planned).

I have been planning for almost a year now :-(

--
Martin Bergvill Narvik, Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 01:35:36 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              hpstaber@COMPUSERVE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Hans Peter Staber <hpstaber@COMPUSERVE.COM>
Subject:      Re: from notetaker to??
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Patrick,

> Anyone know of a tool to convert a notetaker file into
> something that can be read  on a WinCE machine?

Do a print to Clip-Vue File and you have a simple text file. If you need to
maintain the database structure use "," in you Clip-Vue. Excel and Access will
be able to import that.

HP Staber/Salzburg

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 09:33:29 -0000
Reply-To:     abmenezes@mail.telepac.pt
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
Subject:      Re: Ok. I've a Nokia 7110, and now?
In-Reply-To:  <199911250615.HAA08135@golf.dax.net>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

You see Martin. The cold has taken the better of me. Even with the
currency conversor in the palmtop I managed to mess the
conversion badly <G>. I see that the prices in Portugal are about
the same as elsewhere.

But we should expect some reductions from the phone companies
(I bought the Nokia from a reseller) when they start selling
packages including the 7110, with or without locking. I bought my
Nokia 6150 unlocked from my phone company for 1/4 of the street
price: if I remained in the company for 18 months I don't have to
pay anything more; if I changed companies I had to pay to them
the remaining to the street price.

Cheers

Antonio

On 25 Nov 99, at 7:15, Martin Bergvill wrote:


> Hmm USD$411 is about 3288,- NOK and not 9787,- Nok. I have paid about
> 3300,- Nok for mine which I have not recevied..


---------------------------------------------------------
Antonio Queiroz Menezes M.Sc. (Econo)
Porto - Portugal
Cell Phone + 351 91 7555590
Work + 351 22 9981532 (direct, from 9 a.m. to 6 p.m., local time)
abmenezes@mail.telepac.pt
AntonioMenezes@compuserve.com
aameneze@aep.mailpac.pt  (work)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 10:11:40 -0000
Reply-To:     abmenezes@mail.telepac.pt
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
Subject:      Nokia 7110 and WWW/LX, first report
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Martin and all,

I obtained the mobile access number for my ISP, configured
www/lx, aligned the phone and the palmtop, fired www/lx and my
palmtop said "connecting to Nokia 7110 at 38600" next it tried to
deal the number and... nothing.

Something is wrong in my cfg. Do I have to have the ModemInit
entry and to prefix the number with ATDT or whatever? And the
Modem=  entry, what do I put there?

Help

TIA

Antonio

---------------------------------------------------------
Antonio Queiroz Menezes M.Sc. (Econo)
Porto - Portugal
Cell Phone + 351 91 7555590
Work + 351 22 9981532 (direct, from 9 a.m. to 6 p.m., local time)
abmenezes@mail.telepac.pt
AntonioMenezes@compuserve.com
aameneze@aep.mailpac.pt  (work)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 12:09:04 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Geert van Wirdum <v.wirdum@HCCNET.NL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Geert van Wirdum <v.wirdum@HCCNET.NL>
Subject:      Re: PCMCIA Modem
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I suppose you got your safety advices now. In addition, I can remark:

In most laptops, any PCMCIA device grows pretty warm due to heat
produced in the laptop, rather than in the card. In my LX, the same
cards stay cool. Chances are the list can tell you whether your card
should work, if you provide the brand and type.

Geert

> I'm owner of a PCMCIA modem. In my laptop this gets preety warm. So I =
think it
> needs more than the 150 mA of power.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 12:09:16 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Geert van Wirdum <v.wirdum@HCCNET.NL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Geert van Wirdum <v.wirdum@HCCNET.NL>
Subject:      Re: Post/LX & Hotmail
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

www.twigger.com is available in several countries. Wherever you find a
computer with an internet connection, you can go to twigger, enter the
user name and password you would use for your own ISP, select your ISP
from the list, and go! Twigger has on-line documentation on their
procedures and safety. I recently found out about it, and it works for
me. You can receive, send, read attachments, save attachments, etc.

Geert

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 12:26:17 +0000
Reply-To:     fcampoy@gbt.tfo.upm.es
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
Comments:     Authenticated sender is <fcampoy@pop3.gbt.tfo.upm.es>
From:         "Francisco I. Campoy Blasco" <fcampoy@GBT.TFO.UPM.ES>
Subject:      C question
In-Reply-To:  <19990508.070531.6366.1.zimm4@juno.com>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Hi Hp'users !!

        Knows someone how to execute a Dos application under a C program??

        Thanks in advance

____________________________________________

Francisco Ignacio Campoy Blasco
Grupo de Bioingenieria y Telemedicina
E.T.S.I. Telecomunicacion  -  UPM
Ciudad Universitaria  s/n
28040 Madrid, Spain

Tel  +34 91 5495700   Ext 332
Fax  +34 91 3366828
e-mail:  fcampoy@gbt.tfo.upm.es
web: http://www.gbt.tfo.upm.es
____________________________________________

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 06:32:26 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Larry53882@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Keith Dawson <Larry53882@AOL.COM>
Subject:      Re: Please REMOVE
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Please remove me for your e-mail list Thank you

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 07:23:07 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Keefe <emkeefe@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Keefe <emkeefe@USWEST.NET>
Subject:      Re: HP-12C Calculator
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

HP Calc is pretty close to the HP 19BII  financial calculator which is a
notch above the HP 12C. HP Calc can use either RPN or algebraic entry. The
only thing missing is bond calculations and for that you can look on the
SUPER site for UBOND (a solver equation). The depreciation schedules may
also be missing in HP Calc but those could be handled with a Solver equation
or two (or three.)
.ed.PTP

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 04:09:48 -1000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Graham <bgraham@HAWAII.RR.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Graham <bgraham@HAWAII.RR.COM>
Subject:      Re: Personal Ancestral File 3.0 - Assistance requested
Comments: To: Bob Penick <bnj@INAME.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Bob - Did you get the help you needed? I'm running Ver 2.0  on my
HPLX which probly won't help you.

Aloha - bob     \ooo_

Automatic digest processor wrote:
>
> Date:    Tue, 23 Nov 1999 10:27:08 -0500
> From:    Bob Penick <bnj@INAME.COM>
> Subject: Personal Ancestral File 3.0 - Assistance requested
>
> Because of some recommendations from this group a few weeks back I got a
> copy of PAF 3.0 to use in my 200lx while at the library etc.  Despite the
> statement on the package that it needs a 286, it runs well on my double
> speed.  But I am having a problem setting the video so that I can see all
> the screens clearly.  There is a choice of black & white but it still leaves
> me wanting.  Any hints from those of you that use it?
> Thanks,
> bob
--
        -------
<http://home.hawaii.rr.com/bgraham/>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 08:40:23 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <swdowell@BELLSOUTH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <swdowell@BELLSOUTH.NET>
Subject:      Re: Post/LX & Hotmail
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I checked out Twigger and it appears to be only available for email services
in a few countries. I did a little bit of looking around and found another
similiar service at www.020.co.uk .   This free web based email service lets
you get your pop3 mail from any pop email server. It also lets you send mail
that looks like it came from your regular ISP account. Nifty.

Steve

----- Original Message -----
www.twigger.com is available in several countries. Wherever you find a
computer with an internet connection, you can go to twigger, enter the
user name and password you would use for your own ISP, select your ISP
from the list, and go!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 09:44:15 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peter W <peterw@USA.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peter W <peterw@USA.NET>
Subject:      Re: serial cables, serial keyboards
In-Reply-To:  <19991124050108.3022.qmail@mx05.netaddress.usa.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

> Date:    Tue, 23 Nov 1999 16:33:32 -0600
> From:    Russell Lewis <russelllewis@DELPHI.COM>
> Subject: Need serial adaptor

> So my question is, how do I connect an external modem to the serial
> port?  I have tried using the serial transfer cable with a null modem
> adaptor attached, but I could not talk to the modem.

I found that a null modem adapter I own does not pass all 9 lines, but
drops one or two. Some modems don't appreciate that. I have a short
"straight" HP <-> DB-9M cable that I built with all lines intact that
works quite well, though. Test those pins, you may not have a "complete"
cable after attaching the null adapter.

-Peter

> Date:    Tue, 23 Nov 1999 18:18:10 -0600
> From:    Mack Baggette <mack@TIMES2TECH.COM>
> Subject: Re2: Retrofitting a Newton keyboard
>
> > Do your solutions involve modifying a keyboard, or just the cable?
>
> It requires neither as we are having a keyboard made special with a 9 pin
> male serial port in the back that will connect directly with the palmtop
> connectivity cable.

I'd recommend putting the connector in a location so that the palmtop can
be brought closer to the keyboard, like to one side of the back of the
keyboard:

   |------|--\
   |__HP__|  |
|-------------|   <-- note how close the HP can be to the kb's back
|-- keyboard --|       this is nice on airplane tables

> Our keyboard will be self powered with 4 AAA batteries

Hope they last a long time. :-(

> It is 29.6cm x 17.5cm which makes
> it larger than either keyboard, but it has all 12 function keys,

...etc. Big question: how loud is it? The Newton keyboard is very clicky,
considerably more so than, say, the GoType keyboard for PalmOS devices. If
your keyboard is quieter, you may even get sales from those who have
Newton keyboards already. ;-)

-Peter

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 09:01:50 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Theodore Heise <theise@NETINS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Theodore Heise <theise@NETINS.NET>
Subject:      Re: Post/LX & Hotmail
In-Reply-To:  <000d01bf3753$02580780$190afea9@steve>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

> ----- Original Message -----
> www.twigger.com is available in several countries. Wherever you find a
> computer with an internet connection, you can go to twigger, enter the
> user name and password you would use for your own ISP, select your ISP
> from the list, and go!

I don't know fellows.  Call me a skeptic, but this seems like a
great scheme to harvest names and passwords.

Ted

--
Theodore Heise   <theise@netins.net>   West Lafayette, IN, USA

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 16:05:23 +0100
Reply-To:     Tom Bergemann <tbergemann@usa.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tom Bergemann <tbergemann@USA.NET>
Subject:      Let's speak for the 200LX on DEJA.COM
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

DEJA.COM has a lot of user-ratings for mobile devices.

There seem to be not a lot of fans of the LX on DEJA.

Come on!!! Lets push our little friend up a bit.

It's a matter of 2 seconds: Click 5 values in the table on the left hand
side and vote for the HP.

http://www.deja.com/rate/item.xp?CID=12687&PDID=21585

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 10:27:53 -0500
Reply-To:     upaul@ntplx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Uncle Paul <upaul@NTPLX.NET>
Subject:      Fluff: RE: from notetaker to??
In-Reply-To:  <199911250635.BAA10573@spdmraaa.compuserve.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

> Anyone know of a tool to convert a notetaker file into
> something that can be read  on a WinCE machine?

An alternative is to print out the Notetaker item and tape it on the WinCE
screen.

Can you tell that I am not thrilled with WinCE?



Thanks,

Paul Anderson, President, Systems-Consulting
89 Main Street, Broad Brook CT 06016-9701
tel:(860)627-5393 fax:(860)627-5393
web: http://Systems-Consulting.com
Maximizing the results of Information Systems

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 10:42:10 -0500
Reply-To:     upaul@ntplx.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Uncle Paul <upaul@NTPLX.NET>
Subject:      The Turkey That Shot Out Of The Oven
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

The Turkey That Shot Out Of The Oven

The turkey shot out of the oven
and rocketed into the air,
it knocked every plate off the table
and partly demolished a chair.

It ricocheted into a corner
and burst with a deafening boom,
then splattered all over the kitchen,
completely obscuring the room.

It stuck to the walls and the windows,
it totally coated the floor,
there was turkey attached to the ceiling,
where there'd never been turkey before.

It blanketed every appliance,
It smeared every saucer and bowl,
there wasn't a way I could stop it,
that turkey was out of control.

I scraped and I scrubbed with displeasure,
and thought with a grimace as I mopped,
that I'd never again stuff a turkey
with popcorn that hadn't been popped.

Happy Thanksgiving!



Thanks,

Paul Anderson, President, Systems-Consulting
89 Main Street, Broad Brook CT 06016-9701
tel:(860)627-5393 fax:(860)627-5393
web: http://Systems-Consulting.com
Maximizing the results of Information Systems

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 11:38:36 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      The Interferenceproblem
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I just red that Ericsson sells loose IR-modems to some of their
models.

Perhaps this could be a solution to the interference problems with the=
 HP200 LX?I mean if there is a cable between the IR-modem and the phone=
 and it is long enough.

I haven't red all the emails about this problem but AFAIU(U=3Dunderstand)yo=
u want to connect to a phone with an IR-interface just because they=
 have built in modems?If so you could try a mobilphone without an IR-port=
 and connect such loose modem above mentioned.

Just a thought.


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 11:38:40 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Intelligent Webpages
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hello

We have a brand new magazine in Sweden only about handhelds and mobilephone=
s.In its first number was an article about so called "intelligent" webpages=
 which adopts themselves to the kind of computer/browser that connects=
 and strips off everything that
the computer/browser cannot read,and presents the pages so it is readable.=


I hope I managed with an understandable translation:-)

This intillegent pages is mainly for handhelds/mobilephones(WAP).

This magazine brags abut that their website is one of very few (yet)in=
 the world who has this new adoptionpossibility.

Their webadress:companion.idg.se



Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 08:43:31 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: Fluff: RE: from notetaker to??
Comments: To: upaul@ntplx.net
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I'm not fond of them either. But my wife uses one and loves
it. It looks just like her Win95 desktop and makes sense to
her. The only plus from my point of view is that it has a
build in Modem so I don't have to worry about her losing
pcmcia cards, or such like things.

Uncle Paul wrote:
>
> > Anyone know of a tool to convert a notetaker file into
> > something that can be read  on a WinCE machine?
>
> An alternative is to print out the Notetaker item and tape it on the WinCE
> screen.
>
> Can you tell that I am not thrilled with WinCE?
>
> Thanks,
>
> Paul Anderson, President, Systems-Consulting
> 89 Main Street, Broad Brook CT 06016-9701
> tel:(860)627-5393 fax:(860)627-5393
> web: http://Systems-Consulting.com
> Maximizing the results of Information Systems
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 08:53:25 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Frank McConnell <fmc@REANIMATORS.ORG>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Frank McConnell <fmc@REANIMATORS.ORG>
Subject:      Re: C question
Comments: To: fcampoy@gbt.tfo.upm.es
In-Reply-To:  "Francisco I. Campoy Blasco"'s message of "Thu, 25 Nov 1999
              12:26:17 +0000"
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII

"Francisco I. Campoy Blasco" <fcampoy@GBT.TFO.UPM.ES> wrote:
>         Knows someone how to execute a Dos application under a C program??

It depends.

Many C runtime libraries support a system() function that allows the C
program to pass a command string to a child shell process for
execution.

I'd guess that this is usually implemented as a convenient wrapper
around MS-DOS services, e.g. using INT 21H AX=4B00H to run the command
interpreter (from the COMSPEC environment variable) and passing it a
command string to execute.

And the scope of "C program" is large.  If your C program is itself
compiled to an MS-DOS .EXE file and runs as an MS-DOS application
(i.e.  it runs until it's done and then exits), and there's enough
memory left over to run your secondary DOS application, I would expect
this to work.  If your C program is a TSR, a device driver, or an HP
System Manager EXM, I wouldn't expect it to work.

-Frank McConnell
PS: Perhaps this should have been flagged with TECH: in the Subject header.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 17:29:04 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Retrofitting a Newton keyboard
Comments: To: Mark Willis <mwillis@FOXINTERNET.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Mark,

> I could probably make these for people wanting those, they're fairly

that would be great! So I wouldn't get so much askings from other
people who want _me_ to make these plugs for them ;-)
And you have probably the better equipment for this purpose than me.

> easy for me to build (I need to figure out potting the cable so it's
> durable, but I think I know how I want to do that.)  A 1" connector to

Yes, I also thought about this problem. I solved it this way: I made
two little holes in the end of the little circuit board:

--- -----------------
-  |==-----\      o |
-  |==------XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX...
-  |==------XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX...
-  |==------XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX...
-  |==-----/      o |                cable
--- -----------------

     
     board

 connector

...and I pulled a wire through these holes and wrapped the wire around
itself to fix the cable.
hm - do you know what I try to say? I hope so. ;-)


Do you want to make an adapter for me? ;-)
I would need one with HP plug on the one end and a DB9 male plug on the
other - and _not_ nullmodem-wired. approx. 10cm long.
(so that I have a 'standard' 9 pin serial port at the end of the
adapter).

I could make it by myself, but I really don't have the time to do it!

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 09:41:48 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Web-based Email services was Post/LX & Hotmail
Comments: To: Steve Dowell <swdowell@BELLSOUTH.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Steve Dowell <swdowell@BELLSOUTH.NET> wrote:

> I checked out Twigger and it appears to be only available for email services
> in a few countries. I did a little bit of looking around and found another
> similiar service at www.020.co.uk .   This free web based email service lets
> you get your pop3 mail from any pop email server. It also lets you send mail
> that looks like it came from your regular ISP account. Nifty.

Why go that far? Yahoo lets you do the same for up to three
ISPs. You specify the email addresses, userids and
passwords, and tell the name of the POP3 server, and you
can obtain on Yahoo your email from all of these.

Further, if you are willing to put up with advertising junk
from Yahoo, you can even get their service so you can use
their POP3 servers with programs like Post/LX and our other
excellent competitors :-)

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 18:54:33 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tomas Moberg <Tomas.Moberg@ABC.SE>
Subject:      Re: IRC/LX + ICQ? (could a dasoft programer coment this?)
Comments: To: Uli Allen <UAllen@CompuServe.Com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> I am reading your info about ICQ and IRC/LX with interest.
> Can you explain or tell me where I can read how to set
> IRC/LX to have a chat with ICQ?

You can not do that.
You need MICQ for dos to use ICQ.

> Uli
> uallen@compuserve.com
>

      /tomas moberg
                       Uppsala

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 20:20:38 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: Post/LX & Hotmail
Comments: To: Steve Dowell <swdowell@BELLSOUTH.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Steve,

> I checked out Twigger and it appears to be only available for email =
services
> in a few countries. I did a little bit of looking around and found =
another
> similiar service at www.020.co.uk .   This free web based email service =
lets
> you get your pop3 mail from any pop email server. It also lets you send =
mail
> that looks like it came from your regular ISP account. Nifty.

Great! How do you get you email from attglobal.net or compuserve.com?

Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 13:50:30 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <swdowell@BELLSOUTH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <swdowell@BELLSOUTH.NET>
Subject:      Re: Post/LX & Hotmail
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>Great! How do you get you email from attglobal.net or >compuserve.com?

Helmuth- Sorry, I don't know how to configure 020 for those services. I just
ran across this site last night.

Avi- I didn't know Yahoo did that type of mail. You're right, it would be
a little closer. <g>   I'll check it out.

Steve

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 13:53:09 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Quinton Jones Jr <qman@EARTHLINK.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Quinton Jones Jr <qman@EARTHLINK.NET>
Subject:      Re: IRC/LX + ICQ? (could a dasoft programer coment this?)
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

On Thu, 25 Nov 1999 18:54:33 +0100, Tomas Moberg <Tomas.Moberg@ABC.SE> =
wrote:

> > I am reading your info about ICQ and IRC/LX with interest.
> > Can you explain or tell me where I can read how to set
> > IRC/LX to have a chat with ICQ?
>
> You can not do that.
> You need MICQ for dos to use ICQ.




Hi All,


F.Y.I.

ICQ On The HP 200lx (MICQ for DOS) can be found at:
http://members.tripod.com/~ladsoft/

and

IRC/LX can be found at:

D&A Software, Inc
http://www.dasoft.com


"Happy Thanksgiving"


HTH


Regards,

Qman...
HPLX.NET Affiliated - http://qman.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 15:25:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Let's speak for the 200LX on DEJA.COM
In-Reply-To:  <017501bf3756$8d8238a0$3a14e195@wer>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Thu, 25 Nov 1999, Tom Bergemann wrote:

> There seem to be not a lot of fans of the LX on DEJA.

And yet nevertheless, it seems the 200LX has the highest rating of them
all, at 4.8 out of 5:

http://www.deja.com/rate/list_items.xp?CID=12687&PCID=12597

even though there have only been 24 votes for it.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 00:02:34 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Intelligent Webpages
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>so called "intelligent" webpages which adopts themselves
>to the kind of computer/browser that connects and strips off
>everything that the computer/browser cannot read

This is not new. There are some Perlscripts on www.cgi-resource.com
which redirect you to a different page, depending on your browser.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 23:27:25 -0000
Reply-To:     abmenezes@mail.telepac.pt
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
Subject:      Nokia 7110 and the Palmtop
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Hi Martin and all

Following my previous post on this subject I discovered that to use
my GMS provider to access the Internet I had to ask for the
activation of the service (and pay about US$ 2.50 for it). It seems it
takes up to 24 hours for them to enable my account to access the
internet. After that I'll only pay the calls at mobile-mobile rates.

So I don't know if my lack of success on connecting to my ISP
using WWW/LX on the 200LX was due to this oversight on my part
or to some incompatibility between the WWW/LX-Palmtop and the
Nokia 7110 IrDA.

I'll try again tomorrow about noon GMT and report to you about my
experiences.

Meanwhile (sorry if this is fluff) to all that are expecting the Nokia
7110: the stock here in Oporto is exhausted, they have sold all the
units. This balances with informations I had about sales in UK
where the number of units available was rather low, and Martin
information from Norway that he is expecting an ordered unit for
some time. Nokia must be making them at a very slow pace.

Cheers

Antonio
---------------------------------------------------------
Antonio Queiroz Menezes M.Sc. (Econo)
Porto - Portugal
Cell Phone + 351 91 7555590
Work + 351 22 9981532 (direct, from 9 a.m. to 6 p.m., local time)
abmenezes@mail.telepac.pt
AntonioMenezes@compuserve.com
aameneze@aep.mailpac.pt  (work)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 15:56:02 -0800
Reply-To:     "conrad99@pacbell.net" <conrad99@pacbell.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Conrad Cox <conrad99@PACBELL.NET>
Organization: SF-MUG
Subject:      FLUFF: Happy Thanksgiving
MIME-version: 1.0
Content-type: text/plain; charset="us-ascii"
Content-transfer-encoding: 7bit

From my family to yours, I want to wish everyone on the list a
Happy Thanksgiving.

Conrad Cox

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 16:41:33 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      forward:Trading HP100LX for Palm III
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> Subject:Trading HP100LX for Palm III
>  Date: Sat, 20 Nov 1999 23:49:18 +0200
>  From: "Amit Dunsky" <adunsky@yahoo.com>
>  Newsgroups: alt.comp.sys.palmtops.pilot, alt.comp.sys.palmtops.hp
>
>
>
>
> Hi
>
> Would like to trade a barnd new 100LX (just been replaced by HP's warranty)
> 1MB.
> I'm including the following items too:
> 1. A 4MB/Fax-Modem cards (1414LX).
> 2. A PC serial cable.
> 3. Two NC batteries.
> 4. User Manual.
> 5. CD Base CD-ROM.
>
> In return, I would like a Palmpilot IIIx in a good condition with all basic
> gear in a good condition too.
>
> Please contact me:
> Amit Dunsky.
> email: adunsky@tehnologist.com
> Cellular: +972 (51) 364027
>
> Amit.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 21:10:42 -0500
Reply-To:     mack@times2tech.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mack Baggette <mack@TIMES2TECH.COM>
Subject:      Re: serial cables, serial keyboards
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

>I'd recommend putting the connector in a location so that the palmtop can
>be brought closer to the keyboard, like to one side of the back of the
>keyboard:

I'll see what I can do about the location of the port, but I am not sure how much control I have over that part.

>Hope they last a long time. :-(

I believe they should last for months of use, but I will have to check to make sure.

>...etc. Big question: how loud is it? The Newton keyboard is very clicky,
>considerably more so than, say, the GoType keyboard for PalmOS devices. If
>your keyboard is quieter, you may even get sales from those who have
>Newton keyboards already. ;-)

It is definitely less clicky than the Newton, which I have also.  I much more prefer this keyboards feel and sound.

Cheers,
Mack

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 20:27:10 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              ian Butler <ian@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         ian Butler <ian@HPLX.NET>
Subject:      Re: Crystal upgrade (Was: WWW/LX Update?)
Comments: To: A Meshar <sponsor@FTEL.NET>
In-Reply-To:  <199911210807.AAA15201@ftel.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sun, 21 Nov 1999, A Meshar wrote:

> You think so? I think it would be wonderful if someone
> developed an HTML Viewer that could do all the stuff that
> Netscape or MSIE can do AND run on the Palmtop. I am going to
> be in line to buy it :-) Good luck to whoever is doing it.
>
> (Didn't we have that discussion before? We never heard from
> Ian since - is he busy on the project?)

Ian, as any of his friends will tell you, has been far too busy with life to
be messing around with browsers.  And, as I recall, I merely offered to help
design one -- the major problem I had with HV was its instability due to
poor internal design.  My programming skills are limited to a few legacy
languages, and a couple very-high-level languages - both useless for 200LX
design.

More to the point, I couldn't do anything even if I could do anything, as I
am palmtopless yet a third time.  So.. yeah.

ian Butler / ian@hplx.net
http://peace.hplx.net/

"The grass is dead."  - Chris Syverson

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 06:52:04 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: Let's speak for the 200LX on DEJA.COM

David Sargeant writes:
> On Thu, 25 Nov 1999, Tom Bergemann wrote:
>
> > There seem to be not a lot of fans of the LX on DEJA.
>
> And yet nevertheless, it seems the 200LX has the highest rating of them
> all, at 4.8 out of 5:
>
> http://www.deja.com/rate/list_items.xp?CID=12687&PCID=12597
>
> even though there have only been 24 votes for it.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

Currently at 36 ratings we are still at the top. We are a small bunch but
really fanatic!

What is interesting also is that the largest number of ratings is Psion 5 (1170)
followed by Psion 3 (348). (The Palm pilot is not on the list - it isnt a
Handheld PC?). This says a lot about WINCE!



======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 23:32:38 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Intelligent Webpages
In-Reply-To:  <001a01bf3799$2e1b0570$7520fed4@thinkpad760ed>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Fri, 26 Nov 1999, Stephan Goeldi wrote:

> This is not new. There are some Perlscripts on www.cgi-resource.com
> which redirect you to a different page, depending on your browser.

This is also a basic feature of the Apache web server.  For a while, I had
hplx.net set up to direct WWW/LX users to a graphic-less version of the
front page and special versions of the affiliate links.  It worked quite
well.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Thu, 25 Nov 1999 23:09:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Don Miller <dmiller@JFKU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Don Miller <dmiller@JFKU.EDU>
Organization: JFK University
Subject:      Modem / e-mail software for HP95LX??
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

Greetings:

Last winter, I bought a 200LX, which I have been using "on the road",
mostly as a remote-access terminal to my unix shell accounts. I hauled it
almost all the way to the North Pole, and it works great -- and it's NOT
MSWin-CE!

At any rate, a friend recently saw me using it, and said basically "Oh! I
have one of those, but I didn't know it could be used for that - will you
set it up for me?"  Well, his turns out to be an HP95LX, with 1MB RAM - it
does look just like my 200, but it appears to have a couple important
differences, and so far, I haven't been able to get it to work as a remote
e-mail checker.

So, I'm looking for a modem that will work in it (Mine from my 200 will
not - I gather that the modem must not require power from the 95), and for
some pop-3 mail software that can run on it (the non-80x25 screen rules
out the comm program I use on mine, which is Procomm). Or, can the screen
be made to work in 80x25 mode?

Anybody out there using the 95LX for e-mail, or for any comm applications?

All help gratefully accepted!

Regards,

Don Miller


 =============================================================================
 Donald S. Miller                                    e-mail: dmiller@jfku.edu
 Network Operations                PGP Public Key: finger don@holmes.jfku.edu
 John F. Kennedy University

  "The factory of the future will have two employees, a human and a dog.
   The human will be there to feed the dog, and the dog will be there to
   keep the human from touching the computers."
 =============================================================================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 17:54:09 +0930
Reply-To:     rwhitby@asc.corp.mot.com
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rod Whitby <rwhitby@ASC.CORP.MOT.COM>
Subject:      Re: IRC/LX + ICQ? (could a dasoft programer coment this?)

Tomas Moberg writes:
> > I am reading your info about ICQ and IRC/LX with interest.
> > Can you explain or tell me where I can read how to set
> > IRC/LX to have a chat with ICQ?
>
> You can not do that.
> You need MICQ for dos to use ICQ.

And you can use IRC/LX and MICQ over the same connection if
you use DosPPP to initiate your dial-up connection, then use
WWW/LX's ethernet mode to talk to the packet driver in DosPPP,
or MICQ to talk to the packet driver in MICQ.

Using a generic PPP solution (like DosPPP) as a basis for your
modem connectivity allows you to use all the best palmtop
internet tools (LXTCP Suite, Goin' Postal, WWW/LX Suite, MICQ)
without having to disconnect.  Unfortunately, it's a bit
harder to set up (no GUI like Goin' Postal or WWW/LX), but
once you've got it set up it's a single solution that supports
*all* the palmtop internet tools.

A big thanks to DASoft for putting the ethernet mode in WWW/LX
which allows it to be used with open-source packet drivers
(either ethernet or modem or serial).


-- Rod Whitby - rwhitby@hplx.net - http://rwhitby.hplx.net --

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 00:46:36 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: Need serial adaptor
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I'm working on these, I should have 10+ made in a week or two, folks.
I'll be making HP to Modem (DB25) connectors, HP to DB9 short serial
cables and/or adapters (use with a standard "laplink" cable), and HP to
Newton adapters.  I'm going to be able to make these fairly easily, a
vast improvement over the first ones I made which were a pain to make.

I'll make most anything custom, once I finish getting set up, soon.

  Mark

Russell Lewis wrote:
>
> Hi David,
>
> Thanks for your reply. I did manage to finally get it
> working. It was using the TSR program LXPRO to turn the port
> on and off.  It took me awhile before I got it right.
>
> Next question: Where can I find a short adapter to go from
> the LX's serial port to a standard serial.  All I have now
> is the transfer cable.
>
> Thanks.
>
> David Becher writes:
> > Russell Lewis writes:
> > > So my question is, how do I connect an external modem to the serial
> > > port?  I have tried using the serial transfer cable with a null modem
> > > adaptor attached, but I could not talk to the modem.  Is there a special
> > > adaptor made that goes from the HPLX serial port into a standard serial
> > > port?
> >
> > I use PNR & LXTCP with an external modem. I just connected it to the HP serial
> > cable using the male<->male 9 pin adaptor and it worked! I would suggest
> > first starting up datacomm, checking your communications settings and typing
> > A T Z and <enter> (without spaces between the characters). If you get an answer
> > "OK" from the modem, it means that you palmtop is connected to the modem.
> >
> > Next go into Setup (Ctrl-Filer) and check that the Comm port is enabled under
> > DOS. If you want to save power and not enable it always, in DIAL.BAT add the
> > line:
> > serctl /w
> > to the start of dialing and the line
> > serctl /o
> > to the end of the hangup portion.
> > (Serctl enables and disables the serial port. It is found on your d: drive)
> >
> > This is as far as the initial setup goes.
> >
> > Tell us how you fare.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 01:14:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: Retrofitting a Newton keyboard
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Daniel Hertrich wrote:
>
> Hi Mark,
>
> > I could probably make these for people wanting those, they're fairly
>
> that would be great! So I wouldn't get so much askings from other
> people who want _me_ to make these plugs for them ;-)
> And you have probably the better equipment for this purpose than me.
>
> > easy for me to build (I need to figure out potting the cable so it's
> > durable, but I think I know how I want to do that.)  A 1" connector to
>
> Yes, I also thought about this problem. I solved it this way: I made
> two little holes in the end of the little circuit board:
>
> --- -----------------
> -  |==-----\      o |
> -  |==------XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX...
> -  |==------XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX...
> -  |==------XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX...
> -  |==-----/      o |                cable
> --- -----------------
>
>      
>      board
>
>  connector
>
> ...and I pulled a wire through these holes and wrapped the wire around
> itself to fix the cable.
> hm - do you know what I try to say? I hope so. ;-)
>
> Do you want to make an adapter for me? ;-)
> I would need one with HP plug on the one end and a DB9 male plug on the
> other - and _not_ nullmodem-wired. approx. 10cm long.
> (so that I have a 'standard' 9 pin serial port at the end of the
> adapter).
>
> I could make it by myself, but I really don't have the time to do it!
>
> GTX
> daniel
>
> --
>
> Daniel Hertrich                 d.hertrich@gmx.de
> homepage:                  http://daniel.hplx.net
> telephone:                   +49 (0)177 795 55 49

The PCB's are arranged, I need to finalize that in the AM, exactly my
design, except I'd planned to put the Newton MiniDIN-8 connector right
on that PC board.  And I like wire ties for holding cables, myself <G>

I'll make boards for about 90 of the Newton adapters on the first run of
these, and boards for about 280 of the modem cables/short serial cables
(whatever mix fits onto one 8.5"x11" panel), I'll only order a few of
the connectors at first though, unless I hear more orders / get money in
for parts, but in a week I'll have stuff to ship, and can make more
later.  I'm not sure if these will be tin plated boards, or gold plated,
if the guy who's making the boards for me has tin plate solution, I'll
leave it that way, else I'll plate gold on there (I help a mining group,
can get more gold than I *want*, at cost, if I need it, and they want me
set up to gold plate things.)  I usually make my own PC boards (when I
don't just order a bunch professionally done!), but my box of
tools/chemicals is lost in the move here, like so many other things!
(At least this time all my EPRom/Microcontroller programmers didn't
disappear, like last time.  I ended up duplicating a lot of those, then
found them, so I have redundant backups now!)  I detest moving, like
most other people.

Also good to pot the resulting cables, I'm not (yet) set up to make good
molded potted ends, just a matter of time.  Epoxy that doesn't shrink is
a wonderful thing, I'll figure out a potting agent before the PCB's get
here.

I think I'll make some other goodies, if I can figure out what to make
by the AM.  I'll get some materials and get set to make my own PC boards
again, the Laser Printer photoresist methods should work OK for my next
few projects, like the IR extender, and I can do them mostly surface
mount (It's a pain to drill many 0.8mm holes through a PC board,
breaking drill bits, then soldering wires through half of them to do
through-hole vias {interconnections}.  Not a problem when you have a CNC
mill that can drill 100 holes a minute or so, but when you drill 0.5mm
via holes by hand, you break drill bits too often!  Carbide drill bits
are pricey.

  Mark

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 01:19:14 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: very cool folding keyboard
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hmmm - looks nice!  I might take that on, adapt it to the HP 200LX and
the PC110 as well, a PIC or Atmel Flash microcontroller would handle
interfacing it, I imagine.  I'd probably use a PIC12C509A, they're cheap
<G>

The wearable computers crowd are going to *love* that one <G>

When do the first ones ship?

  Mark

Bill Schell wrote:
>
> http://www.thinkoutside.com/
>
> This is a unique folding keyboard for the Pilot.  It was on the cover of
> Portable Desgin magazine this month.  Anybody want to figure out how to
> interface it to a 200LX?  I know people have adapted the Pilot modem
> to a 200LX.  This would be similar.   It's not out until early next year, though.
>
> Bill Schell
> Lucent Technologies, Bell Labs, Murray Hill, NJ
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 01:36:50 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mark Willis <mwillis@FOXINTERNET.NET>
Organization: Occasionally happens here.
Subject:      Re: hard drive question
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Actually:  It's possible to make your own home "clean glove box".

Get a Rainbow vacuum cleaner.  Get an old printer cover (those ones from
the days of Dot Matrix printers, used to cover the printer to quiet it
down.)  Get a roll of duct tape, some spare hose for the Rainbow, and a
bunch of cans of compressed air.  Get some good rubber gloves that you
can work with, that're fairly mobile.  Get some good tools, including a
Torx #8 bit usually.  Get some epoxy, too.

Rig the Rainbow so that you can pull air out of the box, through the
Rainbow, and blow it right back into the box.  The rainbow will suck all
the dust in the air in the box out, dropping it into the water in the
Rainbow.  You want to be able to get the air CLEAN inside this box.

Cut a couple holes for the gloves in the front of the printer cover, so
you can stick your hands in the gloves & work.  Epoxy the gloves into
those holes.

Seal all joints and the lid of the printer cover most of the way, with
duct tape.  Put your drive, any replacement parts, the tools, and the
cans of compressed air in the box;  Seal the lid shut with duct tape.

Turn the Rainbow on, use a can of compressed air to blow the drive, the
tools, the gloves, everything inside the box that could be dirty, off.
Once the inside of the box is CLEAN, you can turn the Rainbow off.  You
can then use the gloves to open the drive, put the spring that popped
loose back into place or free the heads, and then re-seal the drive, and
probably will have NO problems with the drive, if you blew all the dust
clear while the Rainbow was running.  If you didn't do a good job, you
should still be able to recover that file!

Yes, it's probably not worth doing this for one hard drive;  I know a
guy who did drives at home like this, for a while, drives aren't as
worth fixing now as they used to be, though!  (Back when an ST238R ran
$350, if it got sick due to a spring popping off, it WAS worth making
such a rig, just for one drive!)  Should be under $100 worth of parts to
do this, IF you already have the Rainbow vacuum cleaner.  You can
substitute a regular shop vac and a HEPA intake filter, if you don't
have one.  In a pinch, a car engine air filter would probably do fairly
well, those are cheap enough!  <G>  Cheap used shop vacs can be had for
$20...

You could also probably do this with a big plastic bag & a 1x1" wood
frame instead of the printer cover, if you didn't have one;  Use some
plywood to anchor the gloves and as a work surface, so you don't tear
the bag <G>

  Mark

Patrick West wrote:
>
> Oh, forgot to say dump the drive as soon as you get the data
> as all the dust that you don't see that gets into it will
> cause random data loss even if the head doesn't hang up
> again.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
I do small package shipping for small businesses, world-wide.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 10:02:20 0
Reply-To:     abmenezes@mail.telepac.pt
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
Subject:      Nokia 7110 and WWW/LX: Success
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Hi all (and specially Martin)

The new Nokia 7110 works with the WWW/LX on the palmtop
through the respective IR ports.

My GSM phone company has already activated my access and
while taking breakfast this morning I tried to connect.

First attempt at 38400 baud elicited the response from WWW/LX of
"too high baud rate".

Second attempt at 19200 worked a little slowly and after one or two
minutes the connection was broken (Andreas told us so in the
manual).

Later I will try at 14400 and 9600 to see what baud rate is more
stable in the comunications between the palmtop and the Nokia.

Cheers

Antonio


---------------------------------------------------------
Antonio Queiroz e Menezes M.Sc. (Econo)
Porto - Portugal
abmenezes@mail.telepac.pt
AntonioMenezes@compuserve.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 05:43:59 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mark Willis <mwillis@FOXINTERNET.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: very cool folding keyboard
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Bill Schell wrote:
>
> This is a unique folding keyboard for the Pilot.  It was on
the cover of
> Portable Desgin magazine this month.  Anybody want to figure
out how to
> interface it to a 200LX?  I know people have adapted the


Do you mean Landware Gotype? If not,whats wrong with this COOL keyboard?

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 09:58:17 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      WAS: We still need help AND: Please help if you can!
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

as some of you know, Stefan, Andreas and me have a problem with
connecting the palmtop to the internet wia the IrDA modem of a mobile
phone.

I have put our experiences and thoughts about a solution for the IR
interference problem on a web page.

So, if you're already involved into this project, or if you would like
to join and help, please have a look at

http://daniel.hplx.net/hplxir/index.html

Thanks

daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 08:35:20 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Rick Kozak <rick@COLLOQUIST.ON.CA>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Rick Kozak <rick@COLLOQUIST.ON.CA>
Subject:      Re: very cool folding keyboard
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

The Palm electrical connection is just a serial port. All you need is a palm
serial to hp serial cable. The Palm side connector would need to be custom
because you'd need to simulate the Palm side of the connection. The
available cables for Palm are made to mate with the the Palm unit.

rick

> Hmmm - looks nice!  I might take that on, adapt it to the HP 200LX and
> the PC110 as well, a PIC or Atmel Flash microcontroller would handle
> interfacing it, I imagine.  I'd probably use a PIC12C509A, they're cheap
> <G>
>
> The wearable computers crowd are going to *love* that one <G>
>
> When do the first ones ship?
>
>   Mark
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 15:48:06 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              JEZ.CUNNINGHAM@ALCATEL.FR
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jez Cunningham <JEZ.CUNNINGHAM@ALCATEL.FR>
Subject:      GSM cellphone interference with IR - technical stuff
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII; name="GSM"
Content-Transfer-Encoding: 7bit

Just an aside perhaps, but someone mentioned that he could only make a
successful data connection from his lx via his GSM when he had a strong
signal (like 5 bars in the phone display).

This didn't seem right to me so I investigated a bit more.  It didn't
seem right because voice, fax and data are all transmitted as data (it's
a digital system).

Well, a cellphone doesn't always transmit the same power - it depends on
the proximity of the nearest base station.  The feature is called
"Uplink Power Control" and according to the signal strength (error rate)
received by the base station, the base station controller
tells the cellphone to increase or decrease output power.  This is
especially useful to save battery life.

So, when you have a good communication channel, your received signal
will be high (lots of bars in the display) and your transmitted signal
will be low power (enough to give few enough bit errors that the error
correction can cope).

Therefore lots of signal bars = LOW transmit power = less likely
interference to the hplx.

What's the conclusion to minimize interference?
Try to be in a strong signal area to reduce transmit power, and keep the
cellphone as far from the lx as possible (while still keeping the IR
connection ok).

Good luck with the ferrite beads
Jez

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 09:51:32 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Lars Hedstroem <nxw988e@TNINET.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Lotus123
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hello

I wonder if there is anyone here who have some graphic add in programs=
 to Lotus123 which enables you to draw moving averages or linear graphs=
  in the same chart as the barchart?

Or any other add in programs that could be interesting.

When I phoned Lotus in Sweden and asked them,they said that they stopped=
 to sell add ins to 2.4 about hundred years ago...

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 16:18:21 +0000
Reply-To:     fcampoy@gbt.tfo.upm.es
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
Comments:     Authenticated sender is <fcampoy@pop3.gbt.tfo.upm.es>
From:         "Francisco I. Campoy Blasco" <fcampoy@GBT.TFO.UPM.ES>
Subject:      Re: C question
In-Reply-To:  <199911251122.MAA24820@gbt.tfo.upm.es>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Thank you very much for your answers !! (Mike & Nan-shan)

But i've a little question more ....

If  i call (in a C program under Windows) to an executable, how can
i kill/abort it ?? (please under Windows)

Is that related to the identifier the system pass me ??

Thanks again !!

____________________________________________

Francisco Ignacio Campoy Blasco
Grupo de Bioingenieria y Telemedicina
E.T.S.I. Telecomunicacion  -  UPM
Ciudad Universitaria  s/n
28040 Madrid, Spain

Tel  +34 91 5495700   Ext 332
Fax  +34 91 3366828
e-mail:  fcampoy@gbt.tfo.upm.es
web: http://www.gbt.tfo.upm.es
____________________________________________

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 13:03:06 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Fluff: FreeCell 286147
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

I found FC 286147 to be a bit more difficult than average.
cheers... Russ

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 23:06:52 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Nokia 7110 and WWW/LX: Success
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 26 Nov 1999 02:53:48 -0800, Antonio Queiroz Menezes
<abmenezes@mail.telepac.pt> wrote:

> Hi all (and specially Martin)

Thanks..I guess my sms to you with the correct settings for www/lx
helped?

> The new Nokia 7110 works with the WWW/LX on the palmtop
> through the respective IR ports.

Nice.. I saw your posting in the alt.cellular.nokia newsgroup..:-)

How stable is the connection?

Do you have many bad connections?

Is there any difference where you put the 7110..far or near the hplx?

Have you tried to make a connection when the signalstrengt is low?

A gsm phone will as somebody pointed out increase the power and
produce more errors vs the hplx when it is in a area with low
stength.

Both the S25 and the 7110 are dualband gsm phones. They work on the 900
and 1800 net. Daniel have you tried the interference problem when you
are certain that you are logged on to a 1800 link?

> My GSM phone company has already activated my access and
> while taking breakfast this morning I tried to connect.

It worked :-))

> First attempt at 38400 baud elicited the response from WWW/LX of
> "too high baud rate".

Yes that`s normal when the connection is too high..

> Later I will try at 14400 and 9600 to see what baud rate is more
> stable in the comunications between the palmtop and the Nokia.

What connection speed did you end up with? As long as its 9600 I am
lucky. My network supports only 9600, maybe they will upgrade this to
14400 soon. I hope you got a stable connection on 14.4..

The next thing now is to set up your hp so that you can use the
7110/hplx/www/lx for sms. You need the Robot/lx software from the
Dasoft webpage and also the script for sms. I think it is included or
can be found on the webpage too..

Good luck...

--
Martin Bergvill , Narvik Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 14:31:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: FLUFF: WWW/LX Plus a flop??

>From: Robert Hocking <hocking@FLASH.NET>
>Date: Friday, November 19, 1999 03:54
>>"And not to forget, that the phone time in Europe
>>is not as cheap as in the US."
>> How cheap are they then in US?
Instead of raising the price of calls in the US
Lobby to LOWER the cost every where on the 3rd planet from the Sun
Demise of Iridium (as it was planned US$7 @ minute) what a rip off !!!
thus it will happen (crossing fingers)
The usual (old system) analog portable phones are being replaced
The new PCS is now being pushed actively by the TelCos
there is even tri-band PCS phones coming to market in January
To "take advantage" of the handset and use it in any country
End.Of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 14:31:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      CQ DX

Is it possible for subscribers on this list to "visit" this URL ?
http://www.junkbusters.com/cgi-bin/privacy
then "COPY" the paragraph begining with:
The ``User Agent'' variable, in your case ... ending with
Then "PASTE" then "SEND" / "FWD" to me ?
NOT the paragraph prior to that : ``Remote Address''  and ``Remote host:''
End.Of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 19 Nov 1999 14:32:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Edit a message prior to hitting the send key Tips:

Edit a message prior to hitting the send key Tips:
1. Use username only
2. Do not use html tags and signatures
e.g. this is what "I" AKA "ME" see: <Unsupported text or character set removed>
 qO- K,  "whjXm6
0~J 9J' w ; fr &WqO- l Y%
What do they want to say ? (who cares... it is not plain text)
3. Delete the last four lines when replying to a message on the list
(This is not directed to a specific person)
Flames not accepted either
Nobody needs a full screen / repeated lines of the URL on how to reach the HPLX-List commands
(Although debatable when people send unsubscribe)
End.Of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 19:00:46 -0400
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John Ofenloch <jofenlo@EMORY.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John Ofenloch <jofenlo@EMORY.EDU>
Subject:      test
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854";
              x-mac-creator="4D4F5353"
Content-Transfer-Encoding: 7bit

test

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 16:21:52 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Nokia 7110 and WWW/LX: Success
Comments: To: abmenezes@mail.telepac.pt
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Hi all (and specially Martin)
>
> The new Nokia 7110 works with the WWW/LX on the palmtop
> through the respective IR ports.
>
> My GSM phone company has already activated my access and
> while taking breakfast this morning I tried to connect.
>
> First attempt at 38400 baud elicited the response from WWW/LX of
> "too high baud rate".
>
> Second attempt at 19200 worked a little slowly and after one or two
> minutes the connection was broken (Andreas told us so in the
> manual).

So we can now say that there are 4 cell phones with IR that
work? Nokia 8810, Wricsson SH888, Siemens S25, and Nokia
7110? Great result! I will await the full report at 9600.
14.4 and 19.2 is problably slower because it is still too
fast, and your network supports no more than 9600 in any
case. But this is still a source of great envy on my part.
I am in the US and we do not have good GSM coverage,
although improving rapidly.

When your connection is stable, please send me an email
using the IR only - like a postcard! :-)

Nice job.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 20:35:45 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Matthew Sheffield <mws722s@MAIL.SMSU.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Matthew Sheffield <mws722s@MAIL.SMSU.EDU>
Subject:      RadioShack batteries bad?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I recently purchased a pair of NiMH and a pair of NiCads from a RadioShack
and they have performed absolutely horribly, especially the NiMH's. They
don't charge above 2.8v and can't release their charge quite quickly.
Anyone else had any problems w/RadioShack batteries?

If these don't work out for me, could someone tell me the manufacturer of
Thaddeus's NiMH's?

__ms__

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 19:44:12 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: RadioShack batteries bad?
Comments: To: Matthew Sheffield <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Fri, 26 Nov 1999 21:52:56 -0500 (EST)

01h16m23s ago ...
On Fri, 26 Nov 1999, Matthew Sheffield wrote:

> I recently purchased a pair of NiMH and a pair of NiCads from a RadioSha=
ck
> and they have performed absolutely horribly, especially the NiMH's.

The set of NiMH I got from RS basically stunk.  The HiCap NiCds worked
pretty well.  The 1200 mAHr NiMH actually gave less time on the LX than
the  850 mAHr NiCds.  The RS catalog now advertises 1500 mAHr NiMH
cells, but I'll leave it to someone else to see if they're any better.

> If these don't work out for me, could someone tell me the manufacturer =
of
> Thaddeus's NiMH's?

Don't know.  But DigiKey sells 1500 mAHr Panasonic NiMH that work very
well.  $3.25 each.
http://www.digikey.com

Later

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 20:33:14 -0800
Reply-To:     camba1@pacbell.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         BOB1 <camba1@PACBELL.NET>
Subject:      Re: RadioShack batteries bad?
Comments: To: Matthew Sheffield <mws722s@MAIL.SMSU.EDU>
MIME-version: 1.0
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7bit

Matthew Sheffield wrote:
>
> I recently purchased a pair of NiMH and a pair of NiCads from a RadioShack
> and they have performed absolutely horribly, especially the NiMH's. They
> don't charge above 2.8v and can't release their charge quite quickly.
> Anyone else had any problems w/RadioShack batteries?
>
> If these don't work out for me, could someone tell me the manufacturer of
> Thaddeus's NiMH's?
>
> __ms__
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

Mat! I have some rs batt they work fine for me. I also have a set of
NIMH that I brought from Thaddeus they are the best, charge way over
2.87 in fact goes to 2.95 . could not ask for a better performance.

                                BobE

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Fri, 26 Nov 1999 20:39:52 -0800
Reply-To:     camba1@pacbell.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         BOB1 <camba1@PACBELL.NET>
Subject:      Re: RadioShack batteries bad?
Comments: To: Matthew Sheffield <mws722s@MAIL.SMSU.EDU>
MIME-version: 1.0
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7bit

Matthew Sheffield wrote:
>
> I recently purchased a pair of NiMH and a pair of NiCads from a RadioShack
> and they have performed absolutely horribly, especially the NiMH's. They
> don't charge above 2.8v and can't release their charge quite quickly.
> Anyone else had any problems w/RadioShack batteries?
>
> If these don't work out for me, could someone tell me the manufacturer of
> Thaddeus's NiMH's?
>
> __ms__
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
OH! Mat I would not worry about the manufacturer of the batt from
Thaddeus computing as I SAID before they are the best for me.
(for your info on the batt it has JAPAN CJH)

                          BobE

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 06:12:14 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Edit a message prior to hitting the send key Tips:
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>1. Use username only

No. Sometimes I want to send it to the list.
In this case, I use HPLX-L only.

>End.Of.Message :<)

We can figure out ourselves, when your message
ends. So this line you can delete too.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 06:15:34 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Nokia 7110 and WWW/LX: Success
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>So we can now say that there are 4 cell phones with IR that
>work? Nokia 8810, Wricsson SH888, Siemens S25, and Nokia
>7110? Great result!

My Siemens S25 doesn't work properly until now.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 02:07:24 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tomas Moberg <Tomas.Moberg@ABC.SE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Decrypting satellite TV chanels with hp200lx - succes!
Comments: To: Tomas Moberg <Tomas.Moberg@ABC.SE>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Thomas wrote:


"This is neat!
I have gotten the hp200lx to decrypt all the Cable TV chanels
that isrecived via satellite!
I connected a smartcard adapter ($20) to the hp200lx com1 and
insertedthe card in the satelite decrypt reciver. On the hp200lx I hadprogr=
am called Voyager (www.d2mac.com i think) with the latestkeys."


I have just such a satelite receiver,D2Mac,but you can't mean that D2Mac=
 has decrypting programs on their homepage?

Otherwise I guess a so called pirate card is easier to use,it is only=
 one problem,the cryptation is changed continously so    you  must upgrade=
 it all the time.


"This is illegal!"


Yes,but how much isn't illegal?I think I am illegal everyday,
today for example I have bicycled on a bike without ligthing which is=
 forbidden here in Sweden as you know.There are social scientists who=
 say that there are a very exact correlation between the number of lawyers=
 and the number of laws,that is less lawyers less unneccesary laws.The=
 same as for physicians,the more physicians we have the more diseases=
 they will invent.The so called academic elite is very very good at=
 creating the means of their own subsistence.

So take it coooool.....


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 00:50:36 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Nokia 7110 and WWW/LX: Success
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Stephan Goeldi <stephan.goeldi@datacomm.ch> wrote:

> >So we can now say that there are 4 cell phones with IR that
> >work? Nokia 8810, Wricsson SH888, Siemens S25, and Nokia
> >7110? Great result!
>
> My Siemens S25 doesn't work properly until now.

Oh, yes! It is the issue with noise generation which
destroys the communications... Well, Andreas also told me
that the Nokia 8110 and SH888 would likely work better and
faster if better masking of the noise was found. I think he
and Stephan Peichl and a few other of the geniuses around
here are still working on that...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 01:29:59 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: RadioShack batteries bad?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Matthew Sheffield <mws722s@MAIL.SMSU.EDU> wrote:

> I recently purchased a pair of NiMH and a pair of NiCads from a RadioShack
> and they have performed absolutely horribly, especially the NiMH's. They
> don't charge above 2.8v and can't release their charge quite quickly.
> Anyone else had any problems w/RadioShack batteries?

I use them occasionally. The 1200s are ok, but I like
Thaddeus' better.

As to the complaint about the voltage, please look at the
battery itself - NiMH are rated at 1.3 Volt per AA cell, so
the nomimal max is 2.6 Volt. Since you get 2.8 Volt,
consider yourself fortunate.

In any case, the peak voltage achieved is less important
than the total charge you can put into the battery, because
the latter will determine how long the battery will serve
you between charges, not the peak voltage.

I am not sure what the comment "and can't release their charge quite quickly"
means. NiMH batteries are actually pretty good in the
internal resistance area, if that is what you mean. They
seem to let you push them down, a lot then recover nicely.

Some Alkalines have a large internal resistance, and would
serve you much much worse.

  Avi

The above is my own private opinion. For official D&A
Software response, please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 09:36:19 -0600
Reply-To:     sagall@attglobal.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Stanley A. Gall, Jr." <sagall@ATTGLOBAL.NET>
Organization: 123
Subject:      Re: RadioShack batteries bad?
Comments: To: Peniel Romanelli <peniel@WEB2000.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I have used 2 sets of NiMH rechargeables from RS in my digital camera and in my
GPS unit.  They have given good service.  In the digital camera-easily
outperforming alkalines and even a set of lithiums that came with the machine.
I have recently purchased some of the digikey cells.  I've used them in my LX
only, satisfactory after 2 weeks.  The problem is they do not have (+) terminals
extending above the plane of the cylinder.  Ok for LX, bad for flashlights or
any other device where they are inserted in serial.

STan Gall

Peniel Romanelli wrote:

> > I recently purchased a pair of NiMH and a pair of NiCads from a RadioShack
> > and they have performed absolutely horribly, especially the NiMH's.
>
>
>
> Don't know.  But DigiKey sells 1500 mAHr Panasonic NiMH that work very
> well.  $3.25 each.
> Peniel
> --



--
Stanley A. Gall, Jr.
Currently sagall@ibm.net
Please retrain your address book for updated address of sagall@attglobal.net
effectively immediately

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 16:56:27 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Raffaele Gaioni <gaioni@CS.UNIBO.IT>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Raffaele Gaioni <gaioni@CS.UNIBO.IT>
Subject:      Turbo C 2.01 files
In-Reply-To:  <199911270504.GAA17403@CS.UniBO.IT> from "Automatic digest
              processor" at Nov 27, 99 00:00:04 am
Content-Type: text

Hi fellow paltoppers!
I finally got my sandisk 64mb card! (wow)
Now I would like to install the turbo c I've dowloaded from
Borlan some time ago: can anyone help me in the installation process?
I would like to know which are the actually needed files.
Maybe your dir /s in the tc directory is enough...

TIA
Raf

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 08:05:50 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              smoore <smoore@EFFECTNET.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         smoore <smoore@EFFECTNET.COM>
Subject:      PCMCIA Disks & 16 Meg Memory Available
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I  have (9) 20 Meg PCMCIA Flash Disks ATA Type II available. They are
in excellent condition. They have only been used a  very few times on
testing a couple new prototype products at work. I sell (1) 20 Meg
PCMCIA disk for $35.00 plus $5.00 shipping and I sell (2) disks for
$65.00 plus $5.00 shipping. I accept Money Orders Only! I also have (10)

16 Meg 72Pin EDO Simms for sale. I sell (1) 16 Meg Simms for $15.00 and
I sell (2) or more for $13.00 a piece plus $3.00 shipping . You can send

payment to my
 address at:

Scott Moore
20455 S.W. Kirkwood Street
Beaverton, Or 97006

I will email you back  the day I receive your payment and let you know
that your disks our on the way. I always send out next day unless I
receive your payment on a Saturday and then I will send them out on
Monday. Please email me and let me if you are interested and when you
are sending payment so I can hold your disks for you. The response has
been tremendous and the people I have worked with on this group have
been great.  Thanks alot!   Scott

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 17:29:29 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Don E. Weatherly" <weather@EXIS.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Don E. Weatherly" <weather@EXIS.NET>
Subject:      File Tranfer - Controlling Windows
In-Reply-To:  <199911250148.RAA00492@ftel.net>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

At 05:48 PM 11/24/99 -0800, A Meshar provided excellent info about LLRA and
Laplink.  He also wrote:
>
>The problems encountered with LapLink, as with other
>programs that run on the PC under Windhose is that
>Windhose takes a patriarchal attirude towards you - it
>knows better :-( and messes with the serial port, denying
>a DOS program in many case the use of the serial port.
>There are several ways to beat down Windhose into
>submission, but this is a "whole nother subject..." so to
>speak.
>
>I used Interlnk/Intersvr replication and LapLink on a
>1000CX - works just fine, once you bang Windhose into being
>somwhat sensible. It is a snap on DOS PCs, of course.
>

I would appreciate Avi and others addressing how to
"control" MS Windows to permit file transfer programs
to communicate between the HP (DOS) palmtops and
desktops running Win9x and WinNT (especially NT).

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 21:18:31 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              b.newins@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Newins <b.newins@WORLDNET.ATT.NET>
Subject:      Re: Modem / e-mail software for HP95LX??
Comments: To: Don Miller <dmiller@JFKU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Don,

The 95LX is limited to 2400 baud.  I still have an external
QVC 2400 baud modem that I used with my original 512K & 1 meg
95LX's.  It's laying around not being used at the moment.  I
could send it for ,say, $15 plus a few $$ shipping.  I still
have everything including the manual.  I believe that the
950LX needs to be set up in Data Comm for software flow
control if memory serves.    =Bob=

> So, I'm looking for a modem that will work in it (Mine from my 200 will
> not - I gather that the modem must not require power from the 95), and for
> some pop-3 mail software that can run on it (the non-80x25 screen rules
> out the comm program I use on mine, which is Procomm). Or, can the screen
> be made to work in 80x25 mode?
>
> Anybody out there using the 95LX for e-mail, or for any comm applications?
>
> All help gratefully accepted!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 15:11:11 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Michael Minnick <razzoid@YAHOO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Michael Minnick <razzoid@YAHOO.COM>
Subject:      Batteries: Read This
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Hi everybody.  I forgot who sent the message about the
Radio Shack batteries.  I'm sure that the batteries
Thaddeus sells are very good.  However, if you want
very cost-effective NiMH batteries you should buy from
www.thomas-distributing.com/batteries.htm .  More
specifically, check this link out:
www.thomas-distributing/maha-aa-t.htm . Also these
NiMH batteries have a nominal capacity of 1400 mAH but
actually average about 1500mAH according to the
manufacturer.  Unfortunately I have not tried these
batteries (although I ordered them 2 days ago).

Yoda,
May the batteries be with you!   :)
__________________________________________________
Do You Yahoo!?
Thousands of Stores.  Millions of Products.  All in one place.
Yahoo! Shopping: http://shopping.yahoo.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 01:24:59 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Styve Krief <svkrief@CYBERCABLE.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Styve Krief <svkrief@CYBERCABLE.FR>
Subject:      thanks for help...
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hello and thanks for your help..
Excuse for my bad english..
I'm french and I have a HP200LX 4Mo .I look for a software like Lotus
Organizer or Outlook etc...because I want to syncronise all in my
HP200LX
in my computer...
I wait for your advice...

Thanks

Styve Krief

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 00:57:47 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              b.newins@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Newins <b.newins@WORLDNET.ATT.NET>
Subject:      Re: RadioShack batteries bad?
Comments: To: Matthew Sheffield <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Matthew,

Why don't you just buy the NiMH from Thaddeus?  They have
researched and found the best batteries for the Palmtop.
They are a special new formulation that minimizes non-use
discharge rates.

I just bought a 4 pack & the ABC/LX charging software and
find this setup excellent.  It does take a few charge cycles
to get them working their best.    =Bob=

> I recently purchased a pair of NiMH and a pair of NiCads from a RadioShack
> and they have performed absolutely horribly, especially the NiMH's. They
> don't charge above 2.8v and can't release their charge quite quickly.
> Anyone else had any problems w/RadioShack batteries?
>
> If these don't work out for me, could someone tell me the manufacturer of
> Thaddeus's NiMH's?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 19:49:14 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bill Sprague <eugarps@WORLDNET.ATT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bill Sprague <eugarps@WORLDNET.ATT.NET>
Subject:      Re: thanks for help...
Comments: To: Styve Krief <svkrief@CYBERCABLE.FR>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Styve,

You may want to try Outlook 97/98 Contacts Converter on
http://www.palmtop.net/cgi-bin/topfiles.pl . I use it with MS Outlook '97
and it works very well.  By the way, I only wish my French were as good as
your English.

Best regards,

Bill

----- Original Message -----
From: Styve Krief <svkrief@CYBERCABLE.FR>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Saturday, November 27, 1999 7:24 PM
Subject: thanks for help...


> Hello and thanks for your help..
> Excuse for my bad english..
> I'm french and I have a HP200LX 4Mo .I look for a software like Lotus
> Organizer or Outlook etc...because I want to syncronise all in my
> HP200LX
> in my computer...
> I wait for your advice...
>
> Thanks
>
> Styve Krief
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 12:55:21 +1100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russell Hemery <rhemery@POWERUP.COM.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russell Hemery <rhemery@POWERUP.COM.AU>
Subject:      World time update
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

Hi all

I was wondering if anyone has ideas how the World time DB can be updated
with current info...Specifically Tel number area codes.

There are many gaps in the D:world time area code info within wtime.

Does anyone know any net resource that may correlate city with area codes I
could update wtime then post to Super?

Russell

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 21:15:17 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Re: thanks for help...
Comments: To: Styve Krief <svkrief@CYBERCABLE.FR>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Cher Styve,

Il existe un logiciel (apparament excellent) pour
synchroniser vos fichiers *.ADB (agenda) et *.PDB (annuaire)
avec Outlook. Vous pouvez le trouver =E0
http://members.aol.com/freewhL44/lxgames.html.

Amicalement,

 -Mike http://games.hplx.net

P.S. Votre anglais est presque parfait! Veuillez excuser mon
fran=E7ais!

> Hello and thanks for your help..
> Excuse for my bad english..
> I'm french and I have a HP200LX 4Mo .I look for a software like Lotus
> Organizer or Outlook etc...because I want to syncronise all in my
> HP200LX
> in my computer...
> I wait for your advice...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 21:00:53 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "James P. Grenert" <grenert.james@MAYO.EDU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "James P. Grenert" <grenert.james@MAYO.EDU>
Organization: Mayo Medical School
Subject:      Re: RadioShack batteries bad?
Comments: To: Matthew Sheffield <mws722s@MAIL.SMSU.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

How are you charging the batteries?  Hi-cap NiCd and NiMH batteries
require more than the max 6 hrs charging time that the palmtop will charge
them (unless you use Charge-It, ABC, or some other battery charging
software).  I have used the older RS hi-cap NiCd batteries (listed at 850
mAh) and they worked fine for me.  I notice that the current RS hi-cap
NiCd batteries are rated at 1000 mAh; I haven't used these yet.  I
currently use the ones that Times2Tech used to sell, now sold by Thaddeus.
They have worked great (probably 12-14 hrs per charge on 2X, 5MB 200LX
with flash card) for over a year now.  I no longer charge in the machine
except on unusual occasions because the 100 mA charging rate in the 200LX
is so slow with these high-capacity batteries.  I use a Ni-Cd/NiMH charger
from Radio Shack (part# 23-335) which has automatic discharge, and
auto-shut-off for normal and high capacity NiCd and NiMH batteries.  I
like it quite a bit.

Anyway, make sure that you're fully charging the batteries.  One easy
thing to do is to unplug the adapter and plug it back in to restart
charging for another 6 hrs.  New NiMH batteries probably need three 6-hr
charging cycles to fully charge.

Cheers.
J. P. Grenert
grenert@mayo.edu

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 22:26:37 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Douglas Donahue Jr <clams@WORLD.STD.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Douglas Donahue Jr <clams@WORLD.STD.COM>
Subject:      Re: RadioShack batteries bad?
Comments: To: "James P. Grenert" <grenert.james@MAYO.EDU>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I also bought the special niCad Thadeus rechargeables and have had no trouble
for a long time.  I suspected poor batteries from Radioshack and abandoned
them after having trouble.
Digger Donahue

James P. Grenert wrote:

> How are you charging the batteries?  Hi-cap NiCd and NiMH batteries
> require more than the max 6 hrs charging time that the palmtop will charge
> them (unless you use Charge-It, ABC, or some other battery charging
> software).  I have used the older RS hi-cap NiCd batteries (listed at 850
> mAh) and they worked fine for me.  I notice that the current RS hi-cap
> NiCd batteries are rated at 1000 mAh; I haven't used these yet.  I
> currently use the ones that Times2Tech used to sell, now sold by Thaddeus.
> They have worked great (probably 12-14 hrs per charge on 2X, 5MB 200LX
> with flash card) for over a year now.  I no longer charge in the machine
> except on unusual occasions because the 100 mA charging rate in the 200LX
> is so slow with these high-capacity batteries.  I use a Ni-Cd/NiMH charger
> from Radio Shack (part# 23-335) which has automatic discharge, and
> auto-shut-off for normal and high capacity NiCd and NiMH batteries.  I
> like it quite a bit.
>
> Anyway, make sure that you're fully charging the batteries.  One easy
> thing to do is to unplug the adapter and plug it back in to restart
> charging for another 6 hrs.  New NiMH batteries probably need three 6-hr
> charging cycles to fully charge.
>
> Cheers.
> J. P. Grenert
> grenert@mayo.edu
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 21:50:04 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: CloseAll
MIME-version: 1.0

On 1999-11-18 HPLX-L@UCONNVM.UConn.Edu said:
   >Am I reading you reply wrong?  I use more menu AT enter enter as
   >a macro assigned to FN+F10 to terminate all.  I looked at your
   >macro and could not get it to agree with anything on my LX.
   >Could you elaborate please?
   >Robert Hocking

Howdy.  I copied your macro, and it works great.  Thanks for showing me
how to do it.  Is there a way to configure the Application Manager so that
it always starts when one types 200 and presses Enter.


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 06:46:38 +0200
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Irit Becher <davidb@NETMEDIA.NET.IL>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Irit Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: CloseAll
Comments: To: "HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU> David Ball"
          <dmb10@SWBELL.NET>
Content-Type: text/plain
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit

> Howdy.  I copied your macro, and it works great.  Thanks for showing me
> how to do it.  Is there a way to configure the Application Manager so that
> it always starts when one types 200 and presses Enter.

I can think of two ways to do this. (Both are really the same if you dive
into the code.)

1. Get KEYSTUFF from SUPER and before you start 200, stuff the MORE key
onto the keyboard. Then when Sysmgr starts up it will assume that you have
pressed MORE.

2. Get 200MNU from SUPER. It includes a small program caled 200.com which is
an overlay for 200 which accepts a command line parameter, stuffing the
relevant key onto the keyboard before starting up the full version of 200.
You install it by copying 200.com into your path. In order to start Appmgr
you change the line 200 in your autoexec to:

c:\bin\200 q

(I am the author of 200mnu)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 00:52:08 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John Chesbrough <JChesbrough@COMPUSERVE.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John Chesbrough <JChesbrough@COMPUSERVE.COM>
Subject:      Palm V and HP200LX
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=ISO-8859-1

I am considering a Palm V as a handy PDA.  Is it good for downloading
e-mail, perhaps using a digital phone with IR modem,
such as the Nokia 6150 or Motorola L series?  Any experience, please let =
me
know.
John Chesbrough Perth   Australia

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 01:10:08 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: File Transfer - Controlling Windows

Hi Don,

>I would appreciate Avi and others addressing how to
>"control" MS Windows to permit file transfer programs
>to communicate between the HP (DOS) palmtops and
>desktops running Win9x and WinNT (especially NT).

In case you missed my post a while back, here is a clip of it that would
solve your problem if you are running Windows 95 or 98 systems. It works
very well with Windows 95 and 98, but I have no idea if it would work
with Windows NT or not:

---

I work as a beta tester with remote backup software and we learned a
trick relating to that.  To force Windows to release it's serial ports we
include the following additional lines under the heading "386Enh" in
the system.ini file in the windows directory:

ComBoostTime=5
Com1AutoAssign=2
Com2AutoAssign=2
Com3AutoAssign=2
Com4AutoAssign=2
Com1FIFO=1
Com2FIFO=1
Com3FIFO=1
Com4FIFO=1

---

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 16:00:05 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Akinobu Fukuzaki <fukuzaki@CAP.BEKKOAME.NE.JP>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Akinobu Fukuzaki <fukuzaki@CAP.BEKKOAME.NE.JP>
Subject:      NEWSPOST HP200-LX ,Morphy One

Hi all,

Do you know Morphy One?

Morphy One is the FIRST
 "user oriented palmtop computing platform"
which is based on GPL for its hardware design data. Actually, we
are on progress for the project and the first prototype will be
available soon to local developpers and press. We open all process
informations but almost of them are by Japanese. (Sorry....)

Wmmmmmm, do you want more detailes?..... OK, let's go to:
http://member.nifty.ne.jp/toyozou/palmpc/release_English.html

but this will be move soon.

If you have any question send e-mail to:
e-mail: akinobu@fukuzaki.net

CAO,
----------------------------------------------------
Tokyo Metropolitan Institute of Technology
 Akinobu Fukuzaki
TEL +81-42-585-8600 ext.3108

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sat, 27 Nov 1999 23:51:10 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      American Dictionary for IBM DOS!
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

eBay item 205589653 (Ends 11/29/99, 03:04:56 PST) - American
Heritage  Diction

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 15:09:07 +0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Tony Tenorio <atenorio@CBN.NET.ID>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Tenorio <atenorio@CBN.NET.ID>
Subject:      In Search of Quicken 8.0 for DOS
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----=_NextPart_000_002F_01BF39B2.84276740"

This is a multi-part message in MIME format.

------=_NextPart_000_002F_01BF39B2.84276740
Content-Type: text/plain;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hi Folks,=20

Does anybody know where I could find and purchase a copy of Quicken 8.0 =
for DOS.  I'd like to be able to run it in my HP200LX, but I can't find =
it anywhere.  Any leads would be greatly appreciated.  Thanks.

Tony Tenorio

------=_NextPart_000_002F_01BF39B2.84276740
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>

<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type>
<META content=3D'"MSHTML 4.72.2106.6"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#000000 size=3D2>Hi Folks, </FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Does anybody know where I could find =
and=20
purchase a copy of Quicken 8.0 for DOS.&nbsp; I'd like to be able to run =
it in=20
my HP200LX, but I can't find it anywhere.&nbsp; Any leads would be =
greatly=20
appreciated.&nbsp; Thanks.</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Tony =
Tenorio</FONT></DIV></BODY></HTML>

------=_NextPart_000_002F_01BF39B2.84276740--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 04:23:00 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Agentrapid@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Roy Stroud <Agentrapid@AOL.COM>
Subject:      HP200lx System for sale
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

I am selling my hp200lx 4 meg w/ a whole lot of items keyboard serial to
parallel converter modem stacked san disk +++++++ on ebay item #208200855.
Check it out.

Also if you are into using Lotus Agenda check out 208234951 for Release 2.0
books
TX
Roy

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 09:57:49 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
Subject:      WWW/LX and Nokia 7110
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi all,

I think I've achieved a stable connection with the Nokia 7110 and
WWW/LX at 9600 bauds. WWW/LX coughs a little, with error messages
saying that the baud rate may be too high but keeps going. The
connection and transmition are faster at 9600 than at higher rates.

Thanks Martin, Andreas, Daniel and Avi for the help.

I'm in the countryside, at my aunt's home - where I spend all my
weekends - in the midlle of a field about 50 meters from the manor.

Martin I hope you'll receive your 7110 soon.

Regards

Antonio

________________________________________________
Antonio Queiroz Menezes M.Sc. (Econo)
Porto - Portugal
Using Post/LX 2.2 on a HP 200LX Palmtop PC
abmenezes@mail.telepac.pt
AntonioMenezes@compuserve.com
________________________________________________

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 06:40:14 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      FLUFF:Was: WWW/LX and Nokia 7110
Comments: To: Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Antonio wrote:

"I'm in the countryside, at my aunt's home - where I spend all
my weekends - in the midlle of a field about 50 meters from the
manor."

Hello Antonio,what is the temperature today in Portugal?Here in Southsweden=
 where I live the termometer shows +5=B0

Haven't you a rougher climate in Portugal due to the Atlantic than the=
 countries of the Mediterranean Sea on the same latitude?

Best Regards

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 07:08:07 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Keefe <emkeefe@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Keefe <emkeefe@USWEST.NET>
Subject:      Re: World time update
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Russel Hemery asked about updates to the WorldTime Database.

Check out the files by David Lawrence and Jim Gasbarro on the SUPER site
(search for World).  Is this what you're looking for?
.ed.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 07:50:26 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Doug Mc Vey <DougMcVey@PRODIGY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Doug Mc Vey <DougMcVey@PRODIGY.NET>
Organization: Prodigy Internet
Subject:      Re: PCMCIA Disks & 16 Meg Memory Available
Comments: To: smoore <smoore@EFFECTNET.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Scott
Please reserve (2) 20 Meg PCMCIA II card.  I am mailing $70.00 money order
tomorrow 11/29/99.  Please confirm you are holding these for me.
Thanks
Doug Mc Vey
DougMcVey@Prodigy.net
----- Original Message -----
From: smoore <smoore@EFFECTNET.COM>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Saturday, November 27, 1999 10:05 AM
Subject: PCMCIA Disks & 16 Meg Memory Available


> I  have (9) 20 Meg PCMCIA Flash Disks ATA Type II available. They are
> in excellent condition. They have only been used a  very few times on
> testing a couple new prototype products at work. I sell (1) 20 Meg
> PCMCIA disk for $35.00 plus $5.00 shipping and I sell (2) disks for
> $65.00 plus $5.00 shipping. I accept Money Orders Only! I also have (10)
>
> 16 Meg 72Pin EDO Simms for sale. I sell (1) 16 Meg Simms for $15.00 and
> I sell (2) or more for $13.00 a piece plus $3.00 shipping . You can send
>
> payment to my
>  address at:
>
> Scott Moore
> 20455 S.W. Kirkwood Street
> Beaverton, Or 97006
>
> I will email you back  the day I receive your payment and let you know
> that your disks our on the way. I always send out next day unless I
> receive your payment on a Saturday and then I will send them out on
> Monday. Please email me and let me if you are interested and when you
> are sending payment so I can hold your disks for you. The response has
> been tremendous and the people I have worked with on this group have
> been great.  Thanks alot!   Scott
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 08:32:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: Edit a message prior to hitting the send key Tips:

>From: Stephan Goeldi <stephan.goeldi@datacomm.ch>
>To: HPLX-L@UCONNVM.UCONN.EDU
>Subject: Re: Edit a message prior to hitting the send key Tips:
>Reply-To: Stephan Goeldi <stephan.goeldi@datacomm.ch>
>Date: Friday, November 26, 1999 21:12
>
>>1. Use username only
>
>No. Sometimes I want to send it to the list.
>In this case, I use HPLX-L only.

By all means do

Clarification (maybe lost during the translation from Technical writings to: American Dictionary, International, Queens, to European English
in example To: HPLX-L@UCONNVM.UCONN.EDU
the HPLX-L is a username
another example: Stephan Goeldi <stephan.goeldi@datacomm.ch> "J.A. Vart" <thegeeman2@earthlink.net>
"J.A. Vart"  OR Stephan Goeldi is name
<stephan.goeldi@datacomm.ch> OR <thegeeman2@earthlink.net> is the email address
stephan.goeldi OR thegeeman2 is the username
Some poor soul may be listed as: happy subscriber <new@www.zz>
and also using "HP200LX Maillist" <new@www.zz>
depending on which circa "server" he is located at, the server looks up <new@www.zz> and does not care if it is addressed to happy subscriber OR "HP200LX Maillist"

In no way I do infringe on anyone's freedom of speech
Nor wish to obstruct getting off my soap box now
                                           ___
                                          (o o)
--------------------------------------oOO--(_)--OOo------------------
TheGeeMan2 Was Here End.Of.Message :<)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 16:39:00 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: NEWSPOST HP200-LX ,Morphy One
Comments: To: Akinobu Fukuzaki <fukuzaki@CAP.BEKKOAME.NE.JP>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Do you know Morphy One?

Some other folks have told us about it (g)

What some of us are concerned about is not having access to the
Appointment book and calendar and alarm functions of the hp200.  The
rest of the morphy looks very interesting.  Will there be any drivers to
run ega or vga software on the Morphy?

And thanks for posting here.  We like the information.

Fred

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 09:44:55 -0800
Reply-To:     patrickwest@uswest.net
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      JetBeam for DOS
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Folks,
While browsing I found this info and wondered if anyone knew if it would
work on our beloved hplxs

http://www.countersys.com/products/jbdosp.html

Product Overview: JetBeam for DOS
IrDA infrared protocol ported to DOS
Reliable infrared communication for DOS
JetBeam for DOS provides a reliable object code solution to enable
infrared software on any device using the DOS operating system without
buying or creating custom applications. DOS-based systems tend to have
far fewer system resources than their Windows-based counterparts, so
JetBeam for DOS has been designed specifically to require as little OS
and CPU resources as posssible. Extended Systems/Counterpoint leveraged
its experience in the embedded domain to create a small, compact, robust
and full-featured IrDA stack for DOS-based systems.
Complete IrDA software solution
JetBeam for DOS is a complete primary IrDA protocol stack that meets the
IrDA 1.1 specifications. As a primary stack it can both initiate and
respond to IR communications at speeds up to 4 Mbps. The stack framer,
IrCOMM 9-wire, IrLAP, IrLMP, IAS, Tiny TP, and IrLPT are packed into
less than 32 K of code (framer support is available for many popular IR
controllers). Using the source code, you can reduce memory requirements
even further by altering configuration option.
==========
there are pages and pages more.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 12:56:42 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bill Sprague <eugarps@WORLDNET.ATT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bill Sprague <eugarps@WORLDNET.ATT.NET>
Subject:      Re: NEWSPOST HP200-LX ,Morphy One
Comments: To: fjkaufman@WORLDNET.ATT.NET
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Fred,

You wrote:

> > Do you know Morphy One?
> Some other folks have told us about it (g)

You might try http://member.nifty.ne.jp/toyozou/palmpc/release_English.html
theres a picture of it there and some specs.  Looks like it'll be available
in Japan only (hopefully that will change).

Best,

Bill

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 08:03:14 +1300
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, lodger@NZ1.IBM.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Roger Whitmarsh <lodger@NZ1.IBM.COM>
Subject:      Re: PCMCIA Disks & 16 Meg Memory Available
Comments: To: smoore <smoore@EFFECTNET.COM>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

Hi Scott.

Do you have any genuine SanDisk cards left?

Cheers...

Roger Whitmarsh

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 21:33:33 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Edit a message prior to hitting the send key Tips:
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>the HPLX-L is a username


OK. I didn't understand, why you told us, that we shall address ONLY to one
username.
Normally the people on this list don't like it, if we send mails to HPLX-L
*AND* the
senders mailaddress, because they receive the mail double. So I thought, you
mention
this usability problem. But hey: I think, you are right to remember the
list-members,
not to send the mails to 2 addresses.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 21:21:59 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              chris@AMLOG.DEMON.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Randle <chris@AMLOG.DEMON.CO.UK>
Subject:      Backlight in Europe
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="__next_part__1295408426__"

--__next_part__1295408426__
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

This may be a tricky question to answer for a product that
doesn't exist yet, but...

Are there any plans to allow European companies (e.g. Rundel
Datentechnik) to offer the backlighting option?

I would be more likely to go for the upgrade if I could send
my palmtop to Germany rather than to America. I suppose a
comparison for an American might be the difference between
sending something to another State vs. sending it to Europe.
--__next_part__1295408426__
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit


Chris Randle (chris@amlog.demon.co.uk)



--__next_part__1295408426__--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 18:17:39 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Re: Backlight in Europe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> Are there any plans to allow European companies (e.g. Rundel
> Datentechnik) to offer the backlighting option?

And also, any word as to how the beta test of the
backlighting is going would be most welcome. Any serious
problems or shortcomings? Any idea about when beta testing
will be finished?

Thanks!

 -Mike http://games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 20:17:31 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              johncarlo@MINDSPRING.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John Carlo <johncarlo@MINDSPRING.COM>
Subject:      Transition from 100LX
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----=_NextPart_000_008C_01BF39DD.9957FFA0"

This is a multi-part message in MIME format.

------=_NextPart_000_008C_01BF39DD.9957FFA0
Content-Type: text/plain;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

dear HP users,

My 100LX is starting to break up...hinge is very weak,cracked on both =
ends...etc

Questions:  will a 200LX allow my phonebook,notes,and calendar =20
                    to be carried forward on the AceStacker that I use
                    now?

                    is there any way to print out these items from my=20
                        PC backup files, or to open them and add to the
                        them?
I tried to open them and when the PC asked me to pick a program to do =
this with I selected a program and now there is an overlay of that =
programs icon on the file emblem...

thank you for any insights....the 3-Com wave seems so strong and much =
simpler BUT I WANT TO STAY...

JohnCarlo

------=_NextPart_000_008C_01BF39DD.9957FFA0
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2014.210" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>dear HP users,</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>My 100LX is starting to break =
up...hinge is very=20
weak,cracked on both ends...etc</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Questions:&nbsp; will a 200LX allow my=20
phonebook,notes,and calendar&nbsp; </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;=20
&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; to be carried =
forward=20
on the AceStacker that I use</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;=20
&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; =
now?</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;=20
&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; is there any =
way to=20
print out these items from my </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;=20
&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; =
&nbsp;&nbsp;&nbsp; PC=20
backup files, or to open them and add to the</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;=20
&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; =
&nbsp;&nbsp;&nbsp;=20
them?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I tried to open them and when the PC =
asked me to=20
pick a program to do this with I selected a program and now there is an =
overlay=20
of that programs icon on the file emblem...</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>thank you for any insights....the 3-Com =
wave seems=20
so strong and much simpler BUT I WANT TO STAY...</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>JohnCarlo</FONT></DIV></BODY></HTML>

------=_NextPart_000_008C_01BF39DD.9957FFA0--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 12:42:28 +1030
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Collins, Barry (FORENSIC)" <collins.barry@SAUGOV.SA.GOV.AU>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Collins, Barry (FORENSIC)" <collins.barry@SAUGOV.SA.GOV.AU>
Subject:      Lost Contact
MIME-version: 1.0
Content-type: text/plain

Hello All,

I hope no-one will object to my using the Mailing List to try to contact
Kazuto Kitakubo, who, some of you may remember, was a genius at upgrading
the 100LX.  I have been trying in vain to reach him by the normal methods
and I have not seen a message on the List from him for many months, perhaps
not even this year.  Earlier in the year he became a father (which may have
something to do with the silence!) and I think that his home address has now
changed also.

If you are still accessing the List, Kazuto-san, and can read this, I'd love
to get a message from you on my home e-mail system (see below).  Also, there
is something that I am waiting to send to you from Australia and need to
confirm your address.

Barry Collins
<collib@calypso.view.net.au>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 18:45:55 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: Transition from 100LX
Comments: To: johncarlo@MINDSPRING.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> John Carlo wrote:
>
> dear HP users,
>
> My 100LX is starting to break up...hinge is very
> weak,cracked on both ends...etc
Think about Selling it after you get a new machine. There
are a number of us with Machines with Broken screens.


> Questions:  will a 200LX allow my phonebook,notes,and
> calendar to be carried forward on the
> AceStacker that I use now?
Yes

>
> is there any way to print out these
> items from my PC backup files, or to open them
> and add to the them?
There are Windows versions of the Appointment book and phone
book. I believe they are available thru super if not I can
e-mail you a copy. With these you can open, add, delete,
edit, print, etc.



> I tried to open them and when the PC asked me to pick a
> program to do this with I selected a program and now there
> is an overlay of that programs icon on the file emblem...

Go to my computer, doubleclick
Select View menu
Select Options
select the File Types Tab
locate the .adb file type and remove it.
locate the .pdb file type and remove it.

After installing the Windows versions of the phone book and
appointment book double click on the files again and this
time select the phonebook app for pdb files and the
appointment book app for appointment book files

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 21:48:29 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ken Hansen <khansen@NJCC.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ken Hansen <khansen@NJCC.COM>
Subject:      Re: hard drive question
Comments: To: Terry Livingston <docliv@KIVA.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I suspect that this is "possible," but far from trivial.

These are the types of "tricks" a data recovery firm would
employ to rescue the data, but they have practice in such
matters... I would suggest determining the worth of the information
on the drive, getting an estimate from a data recovery, and
seeing if the same drive can be gotten elsewhere.

If the info is not that important, stop (but we are past that already).

If the estimate for a specialist to recover the data is too high,
continue on to the next idea.

If the drive is still available, you could try getting the physical
platters out of the bad drive and drop them in the new/good
drive (swapping heads seems like a really hard thing to do).

HTH,

Ken
khansen@njcc.com

-----Original Message-----
From: Terry Livingston <docliv@KIVA.NET>
To: HPLX-L@UCONNVM.UCONN.EDU <HPLX-L@UCONNVM.UCONN.EDU>
Date: Wednesday, November 24, 1999 8:48 AM
Subject: hard drive question


>Hi,
>    Please forgive me for the off topic bandwidth, but this group is where
>I go for advice on all computers, not just the 200lx. I have followed the
>list long enough to know we have some very tech minded users.
>I have had a hard drive (western digital) go bad (clicking, heads gone)
>I've been told that the clicking is prelude to a head crash, and the drive
>won't boot up.
>I have backups of all but one file (yes, I would like that file)
>It's not worth data recovery (too expensive), but I would be willing to
>experiment with transplanting another set of heads in this bad drive to try
>and read the platters.
>My questions is  "Is this possible ?" (I can see some of you laughing
>already)
>Have any of you done anything like this ?,  what precautions should I take
>to not scratch the platters,  Drive spins up okay, so if I could just get
>it to read for a little bit, I would be home free. Is it possible to swap
>parts from a identical functioning drive and do this ?  Any advice and or
>info you all could provide would be appreciated.  Feel free to call me
>stupid, but if the drive is already bad, I can't do much more harm before
>it hits the trash can.
>Thanks in advance for your replys.  If you feel it's too much off topic
>(and it is) please email me privately (docliv@kiva.net)  Thanks
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 20:46:17 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Backlight in Europe
In-Reply-To:  <HPLX-L%99112818174034@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Sun, 28 Nov 1999, Mike Wagstaff wrote:

> And also, any word as to how the beta test of the backlighting is
> going would be most welcome. Any serious problems or shortcomings? Any
> idea about when beta testing will be finished?

It hasn't started yet.  We haven't finalized the driver circuitry yet, but
we expect to have that done soon.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Sun, 28 Nov 1999 22:00:13 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Meyer <bmeyer@UNION-TEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Meyer <bmeyer@UNION-TEL.COM>
Subject:      Re: NEWSPOST HP200-LX ,Morphy One
Comments: To: Akinobu Fukuzaki <fukuzaki@CAP.BEKKOAME.NE.JP>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

If only the screen would be do true VGA! That is the only drawback I see
in this machine. 200LX--CGA OK. Morphy One with VGA is a better match if
you can find a vender who will produce the LCD. Better CGA than none.

For whatever it is worth, Win 3.0 uses a CGA driver that can be used in
Win 3.1 for CGA.

Bob

Akinobu Fukuzaki wrote:

> Hi all,
>
> Do you know Morphy One?
>
> Morphy One is the FIRST
>  "user oriented palmtop computing platform"
> which is based on GPL for its hardware design data. Actually, we
> are on progress for the project and the first prototype will be
> available soon to local developpers and press. We open all process
> informations but almost of them are by Japanese. (Sorry....)
>
> Wmmmmmm, do you want more detailes?..... OK, let's go to:
> http://member.nifty.ne.jp/toyozou/palmpc/release_English.html
>
> but this will be move soon.
>
> If you have any question send e-mail to:
> e-mail: akinobu@fukuzaki.net
>
> CAO,
> ----------------------------------------------------
> Tokyo Metropolitan Institute of Technology
>  Akinobu Fukuzaki
> TEL +81-42-585-8600 ext.3108
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
+--------------------+-----------------+
|Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
|bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
|Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
+--------------------+-----------------+
|   http://w3.union-tel.com/~bmeyer/   |
+--------------------------------------+

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 05:52:54 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Nokia 7110 and WWW/LX: Success
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

> >So we can now say that there are 4 cell phones with IR that
> >work? Nokia 8810, Wricsson SH888, Siemens S25, and Nokia
> >7110? Great result!
>
> My Siemens S25 doesn't work properly until now.

We are working on this problem.
Please have a look at http://daniel.hplx.net/hplxir/index.html

and try to help! ;-)

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 05:52:56 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Palm V and HP200LX
Comments: To: John Chesbrough <JChesbrough@COMPUSERVE.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi John,

> I am considering a Palm V as a handy PDA.  Is it good for downloading
> e-mail, perhaps using a digital phone with IR modem,
> such as the Nokia 6150 or Motorola L series?  Any experience, please let
> me
> know.

The Nokia 6150 doesn't have an IR modem. Its IR port is only for
exchanging objects as telephone book entries or calendar entries.

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 02:27:04 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      acCIS v4.0 access to Compuserve

Hi All,

Just wanted to set something straight.  Apparently I posted bad info
given to me by Compuserve's tech support earlier.  acCIS v4's author and
publisher both claim that acCIS v4.0 can access Compuserve through the
newer csi servers using the HMI format.

Due to the questions we all had about new Compuserve customer access with
acCIS, I haven't yet received the acCIS v4.0 software, but when I get it,
have established a new Compuserve account and have accessed my new
Compuserve account from my HP200LX via acCIS v4.0, I'll post an update to
the list. :-)

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 06:12:46 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Backlight in Europe
Comments: To: Mike Wagstaff <aj93@DIAL.PIPEX.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I have little hard to understand the excitement  about the backlight=
 screen.

If it had been a bigger screen I would have understood it.There is a=
 frame around the present screen of the HP which is about 1cm thick,this=
 could be replaced with a much thinner one and the screen with a bigger=
 LCD display,that is a bigger screen within  the present the size of=
 the HP.I guess this would be possible to carry out quite easily?

If it ever is made,I will also be excited.

Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 20:15:47 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "KAZU(K.Tanabe)" <QWQ11433@NIFTY.NE.JP>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "KAZU(K.Tanabe)" <QWQ11433@NIFTY.NE.JP>
Subject:      Re: 1000cx software?

Hi all.
About connectivity of 1000CX.
If you run Cpack on 1000CX, you can connect 1000CX to PC with Cpack or
Transfile.

Procedure is as follows.
1.Install Cpack on 1000CX.
  Remove the line "CG.exe" on app200.bat of Cpack.
2.Run app200.bat on 1000CX.
3.Start filer of Cpack on 1000CX.
4.Run Cpack or Transfile on PC.
After these instructions, you can operate 1000CX almost same as 200LX.
Baud rate must be same both 1000CX and PC.
On filer of 1000CX, push Alt + C and select remote settings, you can set up
baud rate.

Bye.
------------------------------------
      KAZU (Kazuhisa Tanabe)
 Kyoto, Japan
 E-mail     QWQ11433@nifty.ne.jp
------------------------------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 07:05:44 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bill Sprague <eugarps@WORLDNET.ATT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bill Sprague <eugarps@WORLDNET.ATT.NET>
Subject:      Re: acCIS v4.0 access to Compuserve
Comments: To: John J Vanderstel <j_vanderstel@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

John wrote:

> Due to the questions we all had about new Compuserve customer access with
> acCIS, I haven't yet received the acCIS v4.0 software, but when I get it,
> have established a new Compuserve account and have accessed my new
> Compuserve account from my HP200LX via acCIS v4.0, I'll post an update to
> the list. :-)

It works very nicely with HMI.  I use my HP200LX as my primary email and
forum machine with acCIS 4.0 for CompuServe and WWW/Post/LX for email and
newsgroups on my AT&T account.  After December 1, I think, HPHAND will be
"Consolidated" with the PALMTOP forum.  Look for the gang in the DOS Palmtop
Section.

Best,

Bill

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 14:14:08 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Backlight in Europe
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>I have little hard to understand the excitement  about the backlight
screen.

So do I.

>If it had been a bigger screen I would have understood it.

I think, the LX screen is perfect. I never saw a better contrast on a LCD
screen. My Siemens S25 mobile phone has colour LCD. But the contrast
is not so good. I would prefer a better contrast. What do I need colours
on a mobile phone for?

What I miss for the LX screen is something like more HPLX-Screendrivers,
e.g. for WordPerfect. The Zoom-Mode of the LX is perfect for reading.
80x25 is too little. I use HV to read large HTML manuals etc. The standard
fonts of HV are too little for large readings. I changed the fonts to the
Zoom-
medium-size. This one is perfect although my eyes are good. I cannot under-
stand, why there are no LX Medium-Zoom Screendrivers for general apps
like Word and WordPerfect.

Yes, you can press Fn-Space to change the zoom mode. But it is not what
I speak of. The built-in apps are real LX-Zoom-compatible. PE is too. The
menu has to stay on its place. When I press Fn-Space in a standard DOS
app, the menu occurs somewhere out of the screen in the 'virtual' screen.

But anyway. The LX screen is perfect. When it is dark, I don't LX.

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 14:42:38 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Guenther Helmuth E." <h_e_guenther@ATTGLOBAL.NET>
Subject:      Re: Backlight in Europe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Stephan,

> What I miss for the LX screen is something like more
> HPLX-Screendrivers, e.g. for WordPerfect. The Zoom-Mode of the LX is
> perfect for reading. 80x25 is too little. I use HV to read large HTML
> manuals etc. The standard fonts of HV are too little for large
> readings. I changed the fonts to the Zoom- medium-size. This one is
> perfect although my eyes are good. I cannot under- stand, why there are
> no LX Medium-Zoom Screendrivers for general apps like Word and
> WordPerfect.

So do I! And I like to add DataPerfect, PlanPerfect.


Regards

Helmuth

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 09:34:47 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Striegel, Alan" <Striegel@PIOS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Striegel, Alan" <Striegel@PIOS.COM>
Subject:      Re: Can anyone spare a hinge cap?
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"

What a guy that Al Kind is!  I asked if anyone could spare one hinge end cap
and he offers to send me what he has; no charge.  When the package arrives
from Al, it has not just one, but TWO end caps, still sealed in the bag from
HP.  And he spent two stamps to send them to me.

Many thanks to a real gentleman.

I hope someday to make enough of a contribution to this community of HPLX
users to repay what I have received from it.

Alan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 14:44:01 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              I Dean <hplx@PYRAM-ID.DEMON.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         I Dean <hplx@PYRAM-ID.DEMON.CO.UK>
Subject:      Re: DOS emulator for WINCE
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Somebody wrote:
>>
>> I was browsing the www.sales.com site today. It has a section selling
>> products including a wide selection of software for WINCE and Palm
>> machines. One of the products caught my eye.
>>
>> It is called CE DOS. It is a DOS emulator. The product description
>> has a screen shot, as well as a list of supported DOS commands. The
>> cost is a wopping $9.95.
>>
>> It is made by Paragon Technologies, whose web site is
>> www.paragon.mda.de.
>>
>> I don't know anything more about, and did not check the Paragon site
>> for any more information. I thought the price is right if anyone
>> wanted to check it out.
>
> Just to clarify, this isn't a DOS emulator that you can run DOS
> programs with; it's a command prompt for WinCE, basically. Not the
> same as XT-CE.

Hi,

There seems to be some confusion regarding this product:

CEDOS is a special version of DOS made (by Paragon) for use with the XT-CE
emulator for Windows CE. It's actually PTS-DOS (if anybody has heard of
that),rebadged for marketing reasons. XT-CE ships with a demo version of CEDOS,
and the $9.95 (or whatever) that Paragon quote is to upgrade this demo to the
full version. It's pretty useless unless you have XT-CE, although I suppose you
could make it work with XTM (the Psion 5 emulator) or DOSEmu (Linux) if you
didn't mind seeing references to Windows CE everywhere. You can get the full
picture (including screenshots of it running on an HP620LX under XT-CE) at:

http://www.penreader.com/cedos.htm

Please note that I am not affiliated with the CEDOS product in any way. I merely
include a demo of it (as requested by Paragon) with my emulator.

Ian Dean
Author of XT-CE
http://www.xt-ce.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 09:34:33 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Backlight in Europe
In-Reply-To:  <HPLX-L%99112906124660@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 29 Nov 1999, Lars Hedstroem wrote:

> I have little hard to understand the excitement about the backlight
> screen.

It's exciting because it allows you to see the palmtop screen when it's
dark.  <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 12:27:41 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Padin <epadin@WAGWEB.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Padin <epadin@WAGWEB.COM>
Subject:      Re: DOS emulator for WINCE

What are the benefits of CE dos over regular ol' MS DOS or Caldera DR DOS?

>Somebody wrote:
>>>
>>> I was browsing the www.sales.com site today. It has a
>section selling
>>> products including a wide selection of software for WINCE and Palm
>>> machines. One of the products caught my eye.
>>>
>>> It is called CE DOS. It is a DOS emulator. The product description
>>> has a screen shot, as well as a list of supported DOS commands. The
>>> cost is a wopping $9.95.
>>>
>>> It is made by Paragon Technologies, whose web site is
>>> www.paragon.mda.de.
>>>
>>> I don't know anything more about, and did not check the Paragon site
>>> for any more information. I thought the price is right if anyone
>>> wanted to check it out.
>>
>> Just to clarify, this isn't a DOS emulator that you can run DOS
>> programs with; it's a command prompt for WinCE, basically. Not the
>> same as XT-CE.
>
>Hi,
>
>There seems to be some confusion regarding this product:
>
>CEDOS is a special version of DOS made (by Paragon) for use
>with the XT-CE
>emulator for Windows CE. It's actually PTS-DOS (if anybody has heard of
>that),rebadged for marketing reasons. XT-CE ships with a demo
>version of CEDOS,

snip

>
>http://www.penreader.com/cedos.htm
>
>Please note that I am not affiliated with the CEDOS product in
>any way. I merely
>include a demo of it (as requested by Paragon) with my emulator.
>
>Ian Dean
>Author of XT-CE
>http://www.xt-ce.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 09:26:36 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Backlight
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

David Sargeant wrote:
>
>>
> It's exciting because it allows you to see the palmtop screen when it's
> dark.  <g>
>
I carry a miniflash light.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 11:36:26 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <sdowell@HARRAHS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <sdowell@HARRAHS.COM>
Subject:      Re: Backlight
MIME-Version: 1.0
Content-Type: multipart/alternative;
              boundary="----_=_NextPart_001_01BF3A90.475A42A4"

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01BF3A90.475A42A4
Content-Type: text/plain

I think using a flashlight is the kludgy work-around that the backlight
project is attempting to eliminate.
BTW, I currently carry a mini flashlight as well. To use it in the dark,
I have to hold it in my teeth. Yuck!

Steve
        -----Original Message-----
        David Sargeant wrote:
        > It's exciting because it allows you to see the palmtop screen
when it's
        > dark.  <g>
        >
        I carry a miniflash light.

        ** HPLX-L LIST Info at
http://www.sp.uconn.edu/~mchem1/HPLX.shtml

------_=_NextPart_001_01BF3A90.475A42A4
Content-Type: text/html
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12">
<TITLE>RE: Backlight</TITLE>
</HEAD>
<BODY>

<P><FONT FACE=3D"Arial">I think using a flashlight is the kludgy =
work-around that the backlight project is attempting to eliminate. =
</FONT>
<BR><FONT FACE=3D"Arial">BTW, I currently carry a mini flashlight as =
well. To use it in the dark, I have to hold it in my teeth. Yuck! =
</FONT>
</P>

<P><FONT FACE=3D"Arial">Steve</FONT>
<UL>
<P><A NAME=3D"_MailData"><FONT FACE=3D"Arial">-----Original =
Message-----</FONT></A>
<BR><FONT SIZE=3D2 FACE=3D"Arial">David Sargeant wrote:</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">&gt; It's exciting because it allows =
you to see the palmtop screen when it's</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">&gt; dark.&nbsp; &lt;g&gt;</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">&gt;</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Arial">I carry a miniflash light.</FONT>
</P>

<P><FONT SIZE=3D2 FACE=3D"Arial">** HPLX-L LIST Info at <A =
HREF=3D"http://www.sp.uconn.edu/~mchem1/HPLX.shtml" =
TARGET=3D"_blank">http://www.sp.uconn.edu/~mchem1/HPLX.shtml</A></FONT>
</P>
</UL>
</BODY>
</HTML>
------_=_NextPart_001_01BF3A90.475A42A4--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 09:25:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, qman@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Quinton Jones, Jr." <qman@EARTHLINK.NET>
Subject:      Re: Backlight in Europe
Comments: To: David Sargeant <david@HPLX.NET>

Hi All,

Backlighting is a must for people how use their palmtops at night and in dark or low lighted areas.

Plus then I get to  remove this dang flashlght
from my month . If you know what I mean. (:-)

----Original Message-----

>On Mon, 29 Nov 1999, Lars Hedstroem wrote:
   >
   >> I have little hard to understand the excitement about the backlight
   >> screen.

David Sargeant <david@HPLX.NET wrote :

>It's exciting because it allows you to see the palmtop screen when it's
   >dark.  <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 12:16:57 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Backlight
Comments: To: Patrick West <patrickwest@USWEST.NET>
In-Reply-To:  <3842B74C.A69A1DB@uswest.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 29 Nov 1999, Patrick West wrote:

> I carry a miniflash light.

Still, a backlight weighs less, can't be lost, and provides vastly
superior illumination than a flashlight.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 14:01:34 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Doug Mc Vey <DougMcVey@PRODIGY.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Doug Mc Vey <DougMcVey@PRODIGY.NET>
Organization: Prodigy Internet
Subject:      Re: Backlight
Comments: To: Patrick West <patrickwest@USWEST.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

How about the Magnify! Program.
I use it in any light and can see great - increases characters 2-3 times.
Only time I use it is in a airport phone booth,etc and am looking at 1-2
number/names.  I understand backlighting will cost upwards of $200.00.
Doug
----- Original Message -----
From: Patrick West <patrickwest@USWEST.NET>
To: <HPLX-L@UCONNVM.UConn.Edu>
Sent: Monday, November 29, 1999 11:26 AM
Subject: Backlight


> David Sargeant wrote:
> >
> >>
> > It's exciting because it allows you to see the palmtop screen when it's
> > dark.  <g>
> >
> I carry a miniflash light.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 14:57:45 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Alvin C. Shih" <acs@ML.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Alvin C. Shih" <acs@ML.COM>
Subject:      Re: Backlight in Europe
Comments: To: qman@EARTHLINK.NET
In-Reply-To:  <199911291742.JAA04142@goose.prod.itd.earthlink.net>; from
              Quinton Jones, Jr. on Mon, Nov 29, 1999 at 09:25:00AM -0800
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii

On Mon, Nov 29, 1999 at 09:25:00AM -0800, Quinton Jones, Jr. wrote:
> Hi All,
>
> Backlighting is a must for people how use their palmtops at night and in dark or low lighted areas.
>
> Plus then I get to  remove this dang flashlght
> from my month . If you know what I mean. (:-)
>
What you need is a Photon II Microlight.  It is an LED-flashlight with
a locking on/off switch and an attached clip.

A picture of it can be seen here:

    http://www.imall.com/fdshops/ShotgunReport/ShotgunReport.html#prod9

Affixing velcro attachments to the HP may prove highly strategic...

ACS
--
Alvin C. Shih        | email: acs@ml.com   | I'm not selling out;
Merrill Lynch        | phone: 212-449-3131 | I'm buying in.
Global Repo Systems  | fax  : 212-449-3822 | (But this tie *is* a bit much.)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 16:18:28 EST
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, Agentrapid@AOL.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Roy Stroud <Agentrapid@AOL.COM>
Subject:      Lotus agenda PIM Site URL
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Can anyone give me the address to post on the PIM site? I haven't seen
anything from there in a while?
TX
Roy

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 22:24:52 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Palm V and HP200LX
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 28 Nov 1999 22:44:10 -0800, Daniel Hertrich <d.hertrich@GMX.DE> wrote:

> Hi John,
>
> > I am considering a Palm V as a handy PDA.  Is it good for downloading
> > e-mail, perhaps using a digital phone with IR modem,
> > such as the Nokia 6150 or Motorola L series?  Any experience, please let
> > me
> > know.
>
> The Nokia 6150 doesn't have an IR modem. Its IR port is only for
> exchanging objects as telephone book entries or calendar entries.

That is correct that 6110/6150 does not have a ir _modem_. But you can
use the ir for data if you use a softwaremodem (Nokia Cellular Data
Suite 1.2).

However Ncds 1.2 will only run on a Win 95/98. Irda on a win 98 laptop
is also very hard to set up due to Microsoft has altered something in
the irdaprotocol in win98. It needs some register tweaking to work on
win 98 laptops.

The ir on the 6110/6150 does not even follow the standard irda that
Nokia was part of developing.

There are pcmcia cards to use the 6110/6150 with a palm and other
handheld machines (via cable). I do not know if this pcmcia works on
the hplx. But no irda..

So therefore if you want to use irda:

Siemens S25
Nokia 7110, 8210, 8850 (8810)
Ericsson Sh888, T28 with irda dongle, R320 +some more Ericcsons with the
dongle

I am sure that the interference problem on the hplx will be solved and
that we can use all of the above phones without problems..

--
Martin Bergvill , Narvik Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 14:50:04 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Backlight in Europe
In-Reply-To:  <19991129145745.C26884@bamako.ny-repo-dev.ml.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 29 Nov 1999, Alvin C. Shih wrote:

> What you need is a Photon II Microlight.  It is an LED-flashlight with
> a locking on/off switch and an attached clip.

The Photon Microlight is still extremely inconvenient when compared to a
backlight. It is, however, pretty cheap.  <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 22:01:19 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Backlight in Europe
Comments: To: Stephan Goeldi <stephan.goeldi@datacomm.ch>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi friends,

> But anyway. The LX screen is perfect. When it is dark, I don't LX.

I even LX in the dark ;-)

With my LED light.

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 14:56:03 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Backlight in Europe
In-Reply-To:  <199911292201.WAA13327@linux.zrz.TU-Berlin.DE>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 29 Nov 1999, Daniel Hertrich wrote:

> > But anyway. The LX screen is perfect. When it is dark, I don't LX.
>
> I even LX in the dark ;-)

Anybody who doesn't LX in the dark is clearly not obeying the first law of
palmtop computing: "Use your palmtop at all times and in all situations,
because that's what it's for."  <g>

I do a LOT of stuff in poor lighting conditions.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 22:42:19 -0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Brown, William" <wdlb5359@GLAXOWELLCOME.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Brown, William" <wdlb5359@GLAXOWELLCOME.CO.UK>
Subject:      Re: Backlight
MIME-Version: 1.0
Content-Type: text/plain

Ah, but you forget that by carrying a suitable flashlight (mini-maglite is pretty good) you are also carrying the spare alkaline cells for the LX!   Of course the dentists on this list may disagree, and recommend a headtorch.  What makes me slightly worry about the idea of backlight is we all bought LXs (some bought several!) despite there being no backlight.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 00:20:39 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Lotus Metro
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Does anybody on the list know what kind of software Lotus Metro is?

 TIA
-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 19:10:17 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Mike Wagstaff <aj93@DIAL.PIPEX.COM>
Subject:      Re: Nokia 7110 and WWW/LX: Success
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

> When we get faster data transmission than 9600, I believe we will
> have to replace our GSM phones with the new standard that is under
> developement at this time.

Does anyone know any more about when the faster GSM speeds
will start to appear (preferably in the UK!)? Also, for
those lucky folks with the new Nokia 7110, does it have the
possibility of handling speeds faster than 9600 bps, and has
anyone tried out the WAP microbrowser?

 -Mike http://games.hplx.net

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 18:16:55 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Location of VDE on Palmtop.Net
MIME-version: 1.0

Howdy.  I tried to download VDE on palmtop.net, and I received "Object Not
Found".  Does anyone know the link to VDE?

Thanks,

David Ball
Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 18:17:00 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Ascii File Splitter
MIME-version: 1.0

I need a reliable ASCII file splitter, so I can split large text files into
smaller chunks for a text editor I'm using.  Can anyone recommend a good
file splitter that doesn't lose any of the file contents in the splitting?

TIA,

David Ball
Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 16:02:14 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, jpmurphy1@JUNO.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Joe Murphy <jpmurphy1@JUNO.COM>
Subject:      WWW/LX won't display web pages

I am writing hoping to get some help.  I have a registered copy of WWW/LX
on my plain vanilla HP200LX, 2Mb memory, 14.4 PCMCIA modem.  My ISP is
IBM.net (now ATTGLOBAL.net).

I can connect and send and receive email, but when I try to display any
web page (including dasoft.com) I get nothing.  The status messages make
it look like things are happening okay and the home page that comes with
the program displays okay, but any incoming pages fail to display.  I
even downloaded all of the programs again and did a new setup with the
same results.

Someone else wrote asking about the same problem.  I watched for a
response, but there were none.  I also contacted dasoft support and Avi
sent me a nice reply, but it didn't help.  If I hadn't seen another
similar question, I would think I have done something wrong.  It also
looks like others are successfully using IBM.net.  I also was able to
successfully use a previous version (ver. 1??).

Help, help!

Joe Murphy
jpmurphy1@juno.com

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 17:20:15 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Backlight
In-Reply-To:  <950F2CFCC55AD211A4750000F845B143019C80C9@ukz249.ggr.co.uk>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 29 Nov 1999, Brown, William wrote:

> Ah, but you forget that by carrying a suitable flashlight
> (mini-maglite is pretty good) you are also carrying the spare alkaline
> cells for the LX!  Of course the dentists on this list may disagree,
> and recommend a headtorch.  What makes me slightly worry about the
> idea of backlight is we all bought LXs (some bought several!) despite
> there being no backlight.

A flashlight that runs off AA batteries is pretty bulky, though.  A lot
more so than a Photon light... and as for the other point, many of us
bought LXs with no memory or speed upgrades, either, but got them when
they became available.  The more stuff there is for the LX, the better,
I'd say.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 01:08:29 -0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              "Brown, William" <wdlb5359@GLAXOWELLCOME.CO.UK>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "Brown, William" <wdlb5359@GLAXOWELLCOME.CO.UK>
Subject:      Re: Backlight
MIME-Version: 1.0
Content-Type: text/plain

I guess I'd have to agree that the LX community has been around so long that we adapt changes to us rather than adapting to change.  That's why we want backlight on the LX, not a backlight with somethng else on the front.    As a corporate component, I still reckon software function above hardware pzazz - so while I'd like a backlight when it's a commodity item/price - I'd rate Curtis Cameron getting 100% two-way synch with Outlook 9x/2nnn higher - I still miss meetings and it's got nothing to do with it being dark.

It's a joy to see such life in the LX.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 18:18:44 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: WWW/LX won't display web pages
In-Reply-To:  <19991129.160215.14286.0.jpmurphy1@juno.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Mon, 29 Nov 1999, Joe Murphy wrote:

> I am writing hoping to get some help.  I have a registered copy of
> WWW/LX on my plain vanilla HP200LX, 2Mb memory, 14.4 PCMCIA modem.
> My ISP is IBM.net (now ATTGLOBAL.net).

Didn't somebody recently state that attglobal.net is having big technical
difficulties all over the world, and this accounts for the way WWW/LX
users are suddenly having all kinds of web access trouble?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 18:08:47 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              loic.sautour@WANADOO.FR
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Loic Sautour <loic.sautour@WANADOO.FR>
Subject:      Re: Ascii File Splitter
Comments: To: David Ball <dmb10@SWBELL.NET>
In-Reply-To:  <0FLZ00LZLI5JUG@mta4.rcsntx.swbell.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I used several times a small dos freeware called hjsplit (15k) and I never
had any problem with it. I don't remember where I downloaded that from but
if you are interested, I can e-mail you a copy.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 19:58:10 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: Location of VDE on Palmtop.Net
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Mon, 29 Nov 1999 22:07:38 -0500 (EST)

02h49m55s ago ...
On Mon, 29 Nov 1999, David Ball wrote:

> Howdy.  I tried to download VDE on palmtop.net, and I received "Object =
Not
> Found".  Does anyone know the link to VDE?

No idea what happened with that link, but the latest version is always
available on the VDE home page:

http://www.punky.com/vde/


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 22:19:38 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Steve Dowell <swdowell@BELLSOUTH.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Steve Dowell <swdowell@BELLSOUTH.NET>
Subject:      Re: Ascii File Splitter
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I'm not 100% sure, but I think you can get hjsplit at freebyte.com.

Steve

----- Original Message -----

> I used several times a small dos freeware called hjsplit (15k) and I never
> had any problem with it. I don't remember where I downloaded that from but
> if you are interested, I can e-mail you a copy.
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 20:58:37 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: WindowsVersions of the Appointment book & Phone
Comments: To: johncarlo@mindspring.com
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> johncarlo@mindspring.com wrote:
> ...available thru super????
go to www.palmtop.net
in the file "quick search" field on the right side of the
page search on
the word pims and the listed file will be:
========
HP PIMs for Windows (384 K) added 02/24/99   (Productivity)
Version 1.0 by Hewlett-Packard

Windows 3.x versions of Appt Book, HPCalc and Phonebook. Use
these files at your own risk and make sure to have backups
of your data. Known bugs: Solver fails to parse many EQN
files. Phonebook may crash for large data files. There is no
documentation other than the Windows help files. Supplied
with early HP OmniBooks. Copyrighted freeware.
==============

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 01:11:42 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              nospam@UNDECIMUS.FREESERVE.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Tony Hutchins <nospam@UNDECIMUS.FREESERVE.CO.UK>
Subject:      Re: WWW/LX won't display web pages
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue, 30 Nov 1999 05:58:57 +0000 (GMT)

04h43m09s ago ...
On Mon, 29 Nov 1999 17:15:48 -0800 (PST), Joe Murphy wrote:

> I am writing hoping to get some help.  I have a registered copy of =
WWW/LX
> on my plain vanilla HP200LX, 2Mb memory, 14.4 PCMCIA modem.  My ISP is
> IBM.net (now ATTGLOBAL.net).

The ATTGLOBAL problem has me stumped. I use them here in the UK and HV
displays pages. I have dialed the New York node 4 times - 2 days it
worked and 2 it didn't. Some WWW/LX -ATTGLOBAL users in the US report
HV still works fine.

I agree with your analysis - the page is requested and and a blank
comes back - I think ATTGLOBAL go to get it from a cache, not
necessarily the real physical site. Similar problems were reported with
desktop browsers... but I have further reorts that *these* are OK now
but HV still has a problem.

Certainly some ATTGLOBAL nodes behave strangely now and HV gets blank
pages!!!  Can vary from day to day. The whole issue is too big for me
and I have no answer at this time.

Regards, Tony

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 07:49:17 +0100
Reply-To:     Etienne Lemaire <stelem@attglobal.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Etienne Lemaire <etienne.lemaire@PANDORA.BE>
Subject:      Re: Ascii file splitter
Comments: To: dmb10@SWBELL.NET
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I found the following in my notes, from this list:

< a public domain utility called CHOP will take any file and "chop" it into
multiple pieces
excerpt from file:
 Version %s -- 02/26/85 1.2 USAGE: %s FILENAME SIZE -SWITCHES
 CHOP Written by W. J. Kennamer (74025,514) and released into the public
domain.
   FILENAME is any valid MS-DOS filename.  Wildcards are not supported.
   Output file names will be FILENAME.1, FILENAME.2, etc.
   Output files are always terminated with a carriage return and a <ctrl>Z.
   SIZE is the desired file size for each new file.
   SWITCHES must follow both the FILENAME and SIZE parameters, and may be
entered in any order.            Switches may be combined. Valid SWITCHES
are:
   -s  strict      chop file at exact SIZE boundary.
    -r  return      chop file at first carriage return  following SIZE
characters (default).
  -px partition   partition file into x equal units. SIZE is ignored (and
may be omitted) if you choose this option.
I could send a copy to anyone that's interested file size  15,488 bytes
systemsconsulting@CSI.COM Paul Anderson
- get your hands on CUTZIT by David Roper.  It's Lunchware. I'll be glad to
send a copy to whoever needs it. Alan <Striegel@PIONEER-STANDARD.COM>
-I think I saw it on SUPER.  Also, if you have the QEDITor, look on the
distribution disk(s) for thieir supplementary program called CHUNKER.
-chunker.exe, is a part of the Qedit word processor. Chunker is 9kB large
and splits files into 64kB chunks, qedit.com takes up 47kB. Chunker can be
used with any other ASCII word processor. I will send the files by e-mail.
Ales Bourek  bourek@iol.cz


HTH

Etienne

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 08:10:17 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Reinhard Mueller <molitor@01019FREENET.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Reinhard Mueller <molitor@01019FREENET.DE>
Subject:      Re: Lotus Metro
Comments: To: stephan.goeldi@datacomm.ch
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

On 11-30 12:20am, you wrote

> Does anybody on the list know what kind of software Lotus Metro is?
>
hi,

It's a TSR with a clipboard and an editor for entering items which
can than be (auto-)exported into Lotus Agenda. I think it is
expandable for use with other Lotus applications, but I am not
sure (I have no documentation). Lotus Metro can be found on the
Lotus Agenda disks, just run "minstall" to install it. It
normally needs 64 kb memory resident, but there is a shareware
program called "swapmt" which reduces the needed memory to 8 kb.
I use Metro mainly for taking quick notes for Agenda without
leaving the current application (works under Systemmanager, too)
and for copy and paste from/to DOS applications (does not work
with Systemmanager-compliant applcations, but only text screen
applications).

Cheers,
Reinhard

Goin' Postal - HP 100/200LX (v3.08) REGISTERED

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 08:30:47 +0100
Reply-To:     Etienne Lemaire <stelem@attglobal.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Etienne Lemaire <etienne.lemaire@PANDORA.BE>
Subject:      Re: thanks for help...
Comments: To: svkrief@CYBERCABLE.FR
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I believe Intellisync from http://www.pumatech.com/ce-palm_fam.html did what
you are looking after.
Unfortunately, I think they stopped selling the HPLX version.
Possibly on Ebay?

Etienne
----------
> From: Styve Krief <svkrief@CYBERCABLE.FR>
> To: HPLX-L@UCONNVM.UConn.Edu
> Subject: thanks for help...
> Date: dimanche 28 novembre 1999 1:24
>
> Hello and thanks for your help..
> Excuse for my bad english..
> I'm french and I have a HP200LX 4Mo .I look for a software like Lotus
> Organizer or Outlook etc...because I want to syncronise all in my
> HP200LX
> in my computer...
> I wait for your advice...
>
> Thanks
>
> Styve Krief
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 23:30:09 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Patrick West <patrickwest@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Patrick West <patrickwest@USWEST.NET>
Subject:      Re: WindowsVersions of the Appointment book & Phone
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I forgot to say that several people asked me about emailing
them
the the Windows version of the PIMs, so if any still can't
get it
from super, let me know, otherwise I'll assume you got it
from super.


> go to www.palmtop.net
> in the file "quick search" field on the right side of the
> page search on
> the word pims and the listed file will be:
> ========
> HP PIMs for Windows (384 K) added 02/24/99   (Productivity)
> Version 1.0 by Hewlett-Packard

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 09:20:18 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              JEZ.CUNNINGHAM@ALCATEL.FR
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Jez Cunningham <JEZ.CUNNINGHAM@ALCATEL.FR>
Subject:      Re: Can anyone spare a hinge cap?
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII; name="Text"
Content-Transfer-Encoding: 7bit

I'll second that - he sent me two feet!  (but I did send some green beer
tokens back in appraciation!)

Thanks Al!
Jez

     From:    "Striegel, Alan" <Striegel@PIOS.COM>
     What a guy that Al Kind is!  I asked if anyone could spare one
     hinge end cap and he offers to send me what he has; no charge.
     When the package arrives from Al, it has not just one, but TWO end
     caps, still sealed in the bag from HP.  And he spent two stamps to
     send them to me.
     Many thanks to a real gentleman.
     I hope someday to make enough of a contribution to this community
     of HPLX users to repay what I have received from it.
     Alan

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 09:00:45 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Nathalie Bugeaud <tps-seti@WANADOO.FR>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Nathalie Bugeaud <tps-seti@WANADOO.FR>
Subject:      F4 in memo and notes
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

as you all know, the F4 in memo for find erases the whole masterpiece in the
apps notes

i got caught many times and want to ask you technoyados is there a way to
disable it in notes?

F9 is only good if the note hasn't been edited, which i do often

nathalie from france with love

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 16:51:19 +0800
Reply-To:     JIMMY TAN <jimmytan@yeos.com.my>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         JIMMY TAN <jimmytan@YEOS.COM.MY>
Subject:      Re: Backlight
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Well, even with the backlight you might still have to hold it in you teeth 'coz
you need to see the keyboard.

Jimmy.
____________________Forward Header_____________________
Subject:    HPLX-L Digest - 28 Nov 1999 to 29 Nov 1999
Author: "HPLX Mailing List" <HPLX-L@UCONNVM.UCONN.EDU>
Date:       1999/11/30 1:00 PM

On Mon, 30 Nov 1999, Steve Dowell wrote:

I do a LOT of stuff in poor lighting conditions.

I think using a flashlight is the kludgy work-around that the backlight project
is attempting to eliminate.
BTW, I currently carry a mini flashlight as well. To use it in the dark, I have
to hold it in my teeth. Yuck!
Steve

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 02:01:54 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Backlight in Europe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Lars Hedstroem <nxw988e@TNINET.SE> wrote:

> If it had been a bigger screen I would have understood it.There is a
>  frame around the present screen of the HP which is about 1cm thick,this
>  could be replaced with a much thinner one and the screen with a bigger
>  LCD display,that is a bigger screen within  the present the size of
>  the HP.I guess this would be possible to carry out quite easily?

Let's think this out _all the way_... :)

Increasing the screen makes little sense. Horizontally you
can add 10-20% so maybe reach 800 pixels. Vertically you
can add maybe 30% or 260 pixels in height. The result: 800
x 260 screen - What screen is that? It is neither fish, nor
fowl, some weird hybrid probably requiring drivers to
display anything.

The better resolution wold be 640 x 480, a VGA screen.

Yes, I heard about the half VGA (640x240) - thse machines
are doing extremely well all over the world. They are
called WinCE Dogs.... :-)

Another issue you have to become aware of is the
manufacturers of the screen. There are no manufacturers
that will make a 800 x 260 - at the pixel size used on the
Palmtop. This is an odd size in two ways: Extra fine pixle
size (I think something like 0.18 inch or whatever it
is...) and adding the odd size will mean no one will touch
the manufacturing of these  screens.

So instead of hammering on making the screen larger leave
the screen alone and use the margins to add the elecronics
required to provide lighting from behind, so when you are
in darkened areas you can still use the palmtop.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 02:01:50 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: acCIS v4.0 access to Compuserve
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

John J Vanderstel <j_vanderstel@JUNO.COM> wrote:

> Just wanted to set something straight.  Apparently I posted bad info
> given to me by Compuserve's tech support earlier.  acCIS v4's author and
> publisher both claim that acCIS v4.0 can access Compuserve through the
> newer csi servers using the HMI format.

Compuserve Customer service is NOTORIOUS for giving bad
information. In the days when I used their alleged
"services" often, I adopted the policy to do the OPPOSITE
of what they said to do. Things always workd out fine then.
Following their lead was 90% disastrous, and 9.9% just
plain wrong, and 0.1% more or less correct. I don't think I
exaggerate the percentages much :-)

The worst part is that they give the bum steer with an air
of confidence, and sometimes even argue with you strongly
about something they haven't got a clue.

acCIS 4.0 was SPECIFICALLY written for HMI. HMI is the
current protocol supported by CIS products.

> Due to the questions we all had about new Compuserve customer access with
> acCIS, I haven't yet received the acCIS v4.0 software, but when I get it,
> have established a new Compuserve account and have accessed my new
> Compuserve account from my HP200LX via acCIS v4.0, I'll post an update to
> the list. :-)

If you established a Compuserve 2000 account, this will not
work. This type of account uses yet another protocol which
is Web-based. It looks much like AOL, and it seems to be
the AOLising "agent" of Compuserve.

Considering the committment made by AOL and Compuserve
after the buyout to the Compuserve customer base, it seems
to me that HMI is not going away any time soon, and will
probably be around for years and years. Needless to say,
companies have made committments and broken them instantly,
so despite my confidence, take that with a grain of salt.
However, for now, HMI is well supported.

HMI itself is fairly much of a dog. It sucks up lots of
resources, it is slow, it is cumbersome, and it is buggy.
When I say this, I do not mean acCIS 4.0, but the HMI
protocol itself and its manifestations on the CIS servers.

I beta tested acCIS 4.0 (and 3.1) and despite much
skepticism on my part, I used it satisfactorily for several
years. My complaints have noting to do with acCIS 4.0 per
se, but with the HMI code in it. That code was given to the
author by Compuserve, and it was simply a "black box" - no
source code, no opportunity for optimisation, no nothing :)
Very frustrating to the author, and beta testers, and
ultimately customers.

Thomas Rundel, the author of acCIS (all versions) is an
excellent programmer and we have engaged his services
before to write part of the WWW/LX suite.

But all in all, acCIS 4.0 is solid as a rock, works fine on
the palmtop, and works with HMI. Compuserve gave you bad
information. Unfortunately, it was repeated here and caused
concern.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 11:00:17 +0900
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              ITSUMI ken-ichi <amt@ITSUMI.KEN.ORG>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         ITSUMI ken-ichi <amt@ITSUMI.KEN.ORG>
Subject:      Re: Ascii File Splitter
Comments: To: dmb10@SWBELL.NET
In-Reply-To:  David Ball's message of "Mon, 29 Nov 1999 18:17:00 +0600"
              <0FLZ00LZLI5JUG@mta4.rcsntx.swbell.net>
MIME-Version: 1.0 (generated by SEMI 1.10.1 - "Morimoto")
Content-Type: text/plain; charset=US-ASCII

Hi

In message "Ascii File Splitter"
    on 99/11/29, David Ball <dmb10@SWBELL.NET> writes:
>I need a reliable ASCII file splitter, so I can split large text files into
>smaller chunks for a text editor I'm using.  Can anyone recommend a good
>file splitter that doesn't lose any of the file contents in the splitting?
>

I recommend you an old unix file utils called "split".
there are many 16bit dos port version including gnuish_dos.

ken

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 11:33:54 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Franklin Eekhout <franklin@ONLINE.NO>
Subject:      200LX WAP?

Hi all,

Anybody working on a WAP browser for the 200LX? Or is it not possible for
some or other reason? It would be a nice idea with an 'old' generation cell
phone.

br

Franklin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 02:29:55 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Backlight
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> How about the Magnify! Program.
> I use it in any light and can see great - increases characters 2-3 times.
> Only time I use it is in a airport phone booth,etc and am looking at 1-2
> number/names.  I understand backlighting will cost upwards of $200.00.
> Doug

Doug, thnks for the plug! I really did not see this
marketing opportunity :-)

  Avi Meshar
  D&A Software
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 02:29:57 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: WWW/LX won't display web pages
Comments: To: jpmurphy1@JUNO.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> I am writing hoping to get some help.  I have a registered copy of WWW/LX
> on my plain vanilla HP200LX, 2Mb memory, 14.4 PCMCIA modem.  My ISP is
> IBM.net (now ATTGLOBAL.net).

ATTGLOBAL has acknowledged they have some problem since
they seem to send an empty page (which HV dutifully
paints!) There is some ATT newsgroup with many such
complaints. They have not produced a solution. Sorry I do
not have any better news at this point.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 06:44:56 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bill Sprague <eugarps@WORLDNET.ATT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bill Sprague <eugarps@WORLDNET.ATT.NET>
Subject:      Re: WWW/LX won't display web pages
Comments: To: A Meshar <sponsor@FTEL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Avi wrote:

> ATTGLOBAL has acknowledged they have some problem since
> they seem to send an empty page (which HV dutifully
> paints!) There is some ATT newsgroup with many such
> complaints. They have not produced a solution.

Weird, their sister organization WORLDNET works beutifully on my
HP200LX with WWW/LX.  Don't these folks share information after
acquisitions?

Best,

Bill

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 12:09:59 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Nokia 7110 and WWW/LX: Success
Comments: To: Mike Wagstaff <aj93@DIAL.PIPEX.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi Mike,

> Does anyone know any more about when the faster GSM speeds
> will start to appear (preferably in the UK!)? Also, for
> those lucky folks with the new Nokia 7110, does it have the
> possibility of handling speeds faster than 9600 bps, and has
> anyone tried out the WAP microbrowser?

Here in Germany the E-Plus net provides already this kind of fast data
transmission. If I remember right, it works up to 38400 baud.
But it's not cheap!

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 12:10:57 GMT
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Daniel Hertrich <d.hertrich@GMX.DE>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Daniel Hertrich <d.hertrich@GMX.DE>
Subject:      Re: Backlight in Europe
Comments: To: David Sargeant <david@HPLX.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Hi,

> > > But anyway. The LX screen is perfect. When it is dark, I don't LX.
> >
> > I even LX in the dark ;-)
>
> Anybody who doesn't LX in the dark is clearly not obeying the first law of
> palmtop computing: "Use your palmtop at all times and in all situations,
> because that's what it's for."  <g>

:-)

> I do a LOT of stuff in poor lighting conditions.

Me too!
For example, I read the HPLX-List everytime  I'm lying in bed and try
to sleep. ;-)
And there are very bad lightening conditions, even if I turn on the
lamp on the bedside table. So I use the LED light nearly daily.

--> To all techs who were suspicious about the current the LED light
draws from the serial port: My serial port is still working, although I
used the LED light now for approximately 200 hours.

GTX
daniel

--

Daniel Hertrich                 d.hertrich@gmx.de
homepage:                  http://daniel.hplx.net
telephone:                   +49 (0)177 795 55 49

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 07:44:41 -0500
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Lars Hedstroem <nxw988e@TNINET.SE>
Subject:      Re: Backlight in Europe
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Goeldie wrote:

I think, the LX screen is perfect. I never saw a better
contrast on a LCD
screen.


I haven't neither seen a better contrast,I pass this question to the=
 other LX users here,have't anyone seen atleast one handheld-contrast=
 as good as the LX?

Now when new models of handhelds are launched,certainly there must be=
 some which has?


" My Siemens S25 mobile phone has colour LCD. But the
contrast is not so good. I would prefer a better contrast. What do I=
 need colours on a mobile phone for?"

I agree with you,very unnessecary.

But as the most effective feedback from our customers to the manufacturer=
 is not to buy their products,if we don't think they are good enough,the=
 inevitable question to yuo Goldie will be,and I am sure you already=
 have guessed what I will ask:why
did you then bought this Siemens S25?? :-)


Concerning bigger screen,I keep track of some stocks I owe in Lotus=
 123 with HLCO barchart,if you have prices one year back
you could be better off with a bigger screen.That is actually the only=
 time I think the screen is too small.

BTW,I had ABB in the beginning of this year,I take it they are also=
  quoted on the Swiss stock exchange?


Lars Hedstroem/Sweden

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 09:36:41 0
Reply-To:     abmenezes@mail.telepac.pt
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Antonio Queiroz Menezes <abmenezes@MAIL.TELEPAC.PT>
Subject:      Re: Nokia 7110 and WWW/LX: Success
In-Reply-To:  <HPLX-L%99112919101795@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Mike,

As far as I know my cell phone operator will not provide WAP
services until the midlle of the next year.

You can set the palmtop to higher baud rates but the cell
operatorors use 9600 or 14400. In my limited experience with IrDa
communications higher rates lead to more frequent broken
connections. But Andreas pointed to me that this could be due to
some of the TSR's I load. I'm experimenting to see if any TSR's are
fiddling with the CPU.

Regards

Antonio


On 29 Nov 99, at 19:10, Mike Wagstaff wrote:


> Also, for  those lucky folks with the new Nokia 7110, does it have the
> possibility of handling speeds faster than 9600 bps, and has
> anyone tried out the WAP microbrowser?
>



---------------------------------------------------------
Antonio Queiroz e Menezes M.Sc. (Econo)
Porto - Portugal
abmenezes@mail.telepac.pt
AntonioMenezes@compuserve.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 15:57:37 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      Re: Location of VDE on Palmtop.Net
Comments: To: David Ball <dmb10@SWBELL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

David,

try upper case or lower case. I had the same problem.

Winfried
>Howdy.  I tried to download VDE on palmtop.net, and I received "Object Not
>Found".  Does anyone know the link to VDE?
>
>Thanks,
>
>David Ball

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 15:57:39 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      Re: WWW/LX won't display web pages
Comments: To: jpmurphy1@JUNO.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

Joe,

>I can connect and send and receive email, but when I try to display any
>web page (including dasoft.com) I get nothing.  The status messages make
>it look like things are happening okay and the home page that comes with
>the program displays okay, but any incoming pages fail to display.

I had similar problems several times. They were ISP related.
Have you tried at different times ?

Regards
Winfried

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 15:57:35 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Winfried Zettelmeyer <wzettelmeyer@MICROCAD.ES>
Subject:      Re: Can anyone spare a hinge cap?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

>What a guy that Al Kind is! ....
>Many thanks to a real gentleman.
>...
>Alan

That's what he is ! I happened to ask around about a snap-in
holder - he sent me one, also free of charge. Long live Al
Kind.

Winfried

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 16:04:56 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Franklin Eekhout <franklin@ONLINE.NO>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Franklin Eekhout <franklin@ONLINE.NO>
Subject:      Cell Phone Speeds and WAP

> On 29 Nov 99, at 19:10, Mike Wagstaff wrote:
> > Also, for  those lucky folks with the new Nokia 7110, does it have the
> > possibility of handling speeds faster than 9600 bps, and has
> > anyone tried out the WAP microbrowser?

There is an article in the Norwegian press today about a new services from
our local ISP, Telenor. Up to 4x9600 speed. The cost is also 4x as it uses 4
channels. At first 2x is being advertised. Apparently the only GSM device
capable so far of this throughput is the Nokia Cardphone. Which I expect
will drain a 200LX.

And for a WAP-browser feel, fire up IE or Netscape and check out
www.gelon.net. Lots of links to WAP sites too.

br

Franklin

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 10:09:51 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              MCHEM1@UCONNVM.UCONN.EDU
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Al Kind <MCHEM1@UCONNVM.UCONN.EDU>
Subject:      Re: Can anyone spare a hinge cap?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue, 30 Nov 1999 10:01:03 -0500 (EST)

Just for the record, I have had my share of genorousity from many
HPLX-L (too numerous to mention, but you know who your are <G>), so it
is just my way of giving back all those who have helped me...When I
first got my LX, I requested help setting up communications to my PC, I
got a very fast, complete & courteous response from a member of
Comp.sys.palmtops, that just set the tone for me, I was really
impressed!

Thank you all more making the HPLX-L a rewarding project!

Regards...AJKind


03m28s ago ...
On Tue, 30 Nov 1999, Winfried Zettelmeyer wrote:

> >What a guy that Al Kind is! ....
> >Many thanks to a real gentleman.
> >...
> >Alan
>
> That's what he is ! I happened to ask around about a snap-in
> holder - he sent me one, also free of charge. Long live Al
> Kind.
>
> Winfried
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>
*
* Al Kind, 3113 Horsebarn Rd U-193, Storrs CT 06269-4193 USA
* Phone:(860)486-6126  FAX:(413)826-8780 **TeamHP200LX**

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 17:03:46 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: Nokia 7110 and WWW/LX: Success
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 29 Nov 1999 17:00:48 -0800, Mike Wagstaff <aj93@DIAL.PIPEX.COM> wrote:

> > When we get faster data transmission than 9600, I believe we will
> > have to replace our GSM phones with the new standard that is under
> > developement at this time.
>
> Does anyone know any more about when the faster GSM speeds
> will start to appear (preferably in the UK!)? Also, for
> those lucky folks with the new Nokia 7110, does it have the
> possibility of handling speeds faster than 9600 bps, and has
> anyone tried out the WAP microbrowser?

Telenor Mobil have just launched higher speeds on gsm here in Norway.
They have done this by letting the customer use several channels (time
slots). I think the speed was 38400 in and 19200 out. You have to pay
for datacall*2.

However the only "phone" that supports these speeds are the Nokia Card
Phone (latest version). According to Telenor Data support they do not
know any other "phones" that support this speeds. They do not now if
there will be any phones in the near future either.

In the specs for the 7110 it says that it supports 14400. According to
Data support this is only if your provider increase the size of the
timeslot and they will not do that here in Norway.

So it seems that there are 2 techologies. 1. Where the provider lets
the customer use _several_ timeslots, and 2. Where they increase the
_size_ of the timeslots. Only 1 will be implemented here in Norway.

Check with your provider which solution they will implement. Also be
aware that how this works is not a sure thing..its how I understood the
little info I got a hold of..

Btw Telenor and Ericsson have just made a test with the new Umts
technology. But this is a new techology which will not be availible
for a while (2001?). They will licence it here in Norway probably
before the summer so providers can apply for a licence and maybe launch
this at the end of next year..(guess/rumor!)

Regarding wap..I have not tried it yet.. But if you take a look at

http:\\wap.telenor.no

(It`s "normal" html)

they have a 2.1 mb avi file where they use a 7110 to search for info
about Norge/Norway in CapLex (Encyclopedia). I think that the avi shows
in real time how much time it takes to connect/find info. The site is
in norwegian, but I think the avi is somewhere at the top..not to hard
to find..

--
Martin Bergvill , Narvik Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 17:03:48 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: GSM cellphone interference with IR - technical stuff
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On Mon, 29 Nov 1999  18:13:47 +0000, ccohen5@compuserve.com wrote:

> I use my Bosch phone with its custom cable (no IR) and have not
> had any interference from the phone transmission. Even when using
> only two of four signal bars and down to my last battery bar. In
> fact data transmission seems to use much less power than voice.

You will not have problems when you are using a cable. Only when you
use ir. I do not know if data use less power. But I doubt that this is
the case. The phone will transmit the same amount of data if its data
or voice I think..

--
Martin Bergvill , Narvik Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 17:03:49 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Gsm coverage in US+more was:Nokia 7110 and WWW/LX: Success
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 26 Nov 1999 17:13:03 -0800, A Meshar <sponsor@FTEL.NET> wrote:

> So we can now say that there are 4 cell phones with IR that
> work? Nokia 8810, Wricsson SH888, Siemens S25, and Nokia
> 7110? Great result!

If just anyone could test a Ericsson which can use the external
irdongle I am sure that it will work too with the hplx.

> I will await the full report at 9600.
> 14.4 and 19.2 is problably slower because it is still too
> fast, and your network supports no more than 9600 in any
> case.

See another message from me about speed..

> But this is still a source of great envy on my part.
> I am in the US and we do not have good GSM coverage,
> although improving rapidly.

This is something I have never understood.. Why is it that the US is so
far "behind" when it comes to digital cellular phonenetwork? I am not
writing this to make fun of anyone. I am just curios why..

We have a lot of US tvseries and films on tv/cinema here. I have
always wondered why they used old Motorola flip phones in these
films/series.

Lately I have seen newer phones like the Motorola wings in a tv serie
called "Jag", and also in X-files where they use cellular phones alot.
I think they use Nokia a lot..

Here in Norway we have had a cellular phonenetwork for ages. First the
scandinavien NMT system which was analog and then gsm 900/1800 for
many years now. "Everybody" from the age 12 and up have gsm phones
nowadays..(not always a good thing though:-). They sell gsm phone at
gasstations/groceryshops and at streetcorners.. But this is not the
case over there?

I belive that pagers are still "hot"/widespread over there?

How are things over there regarding fixed net. Here digital isdn are
getting widespread. Also broadband internet via cable (tv) are coming.

There are also some radio network (as your Richoet), but its for
companys/expencive/in large citys. I would like to have a radiolan on
my hplx..

I would be gratefull if somebody could take the time answer this..

--
Martin Bergvill , Narvik Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 08:20:58 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              al chin <hobchi@YAHOO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         al chin <hobchi@YAHOO.COM>
Subject:      F4 in memo and notes
Comments: To: Nathalie Bugeaud <tps-seti@WANADOO.FR>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Nathalie Bugeaud
> as you all know, the F4 in memo for find erases the whole
> masterpiece in the apps notes
>
I didn't knowed that......
>
> F9 is only good if the note hasn't been edited, which i do
> often
>
> nathalie from france with love
yor pal al from BKK with lots of love....



__________________________________________________
Do You Yahoo!?
Thousands of Stores.  Millions of Products.  All in one place.
Yahoo! Shopping: http://shopping.yahoo.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 11:58:03 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Padin <epadin@WAGWEB.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Padin <epadin@WAGWEB.COM>
Subject:      Secure HTTP anyone?

Hi,

Is there a HPLX based web browser that supports secure HTTP? This is the
same encrypted web surfing that you use when sending in credit card or
banking infromation. It typically 'talks' on TCP port 443. You use URLS like
https://somesever.somewhere.com

If not, is there any way to use encrypted connections? SSH perhaps?

I know that the LX is slow and encryption needs a lot of math on the fly but
I was hoping that someone may have heard of something.


Thanks.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 09:19:44 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Longden_Loo@CANDLE.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Longden Loo <Longden_Loo@CANDLE.COM>
Subject:      Re: F4 in memo and notes
Comments: To: Nathalie Bugeaud <tps-seti@WANADOO.FR>
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii

>as you all know, the F4 in memo for find erases
>the whole masterpiece in the apps notes

>i got caught many times and want to ask you technoyados
>is there a way to disable it in notes?

I believe this is a feature addressed by a shareware utility called Buddy (on
the SUPER site).  Buddy remaps the function keys and requires you to press the
key twice to clear the note.  Buddy may be overkill for your purposes, since it
remaps and alters MANY LX features, usually for the better, but a drastic change
nonetheless, especially to the novice (and technoyado-wannabees).

Buddy users can elaborate (I'm not one, vanilla remains my favorite flavor), and
other users may be aware of alternatives.

- Longden (who has probably lost his share of masterpieces)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 10:39:34 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Backlight
In-Reply-To:  <549946325@yeos.com.my>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 30 Nov 1999, JIMMY TAN wrote:

> Well, even with the backlight you might still have to hold it in you
> teeth 'coz you need to see the keyboard.

The backlight is bright enough to see the keyboard.  It's not quite bright
enough to make out the markings on the keys at a normal viewing angle, but
moving your head or tilting the screen forward allows you to read the keys
quite well.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 10:44:37 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Secure HTTP anyone?
In-Reply-To:  <ED29C0E690D4D1118B3E00104B1F4692190264@ntbox.wagweb.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 30 Nov 1999, Ed Padin wrote:

> Is there a HPLX based web browser that supports secure HTTP? This is
> the same encrypted web surfing that you use when sending in credit
> card or banking infromation. It typically 'talks' on TCP port 443. You
> use URLS like https://somesever.somewhere.com

According to Andreas, as I recall, doing https would require at least a
386.  We'll have to wait for the Morphy One or the equivalent.

> If not, is there any way to use encrypted connections? SSH perhaps?

Rod Whitby once told me that an ssh client for the 200LX would require
long delays between keystrokes.  I hope he was just bluffing and trying to
avoid the hassle of writing it.  <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 13:01:15 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Padin <epadin@WAGWEB.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Padin <epadin@WAGWEB.COM>
Subject:      Re: Secure HTTP anyone?

>
>On Tue, 30 Nov 1999, Ed Padin wrote:
>
>> Is there a HPLX based web browser that supports secure HTTP? This is
>> the same encrypted web surfing that you use when sending in credit
>> card or banking infromation. It typically 'talks' on TCP
>port 443. You
>> use URLS like https://somesever.somewhere.com
>
>According to Andreas, as I recall, doing https would require at least a
>386.  We'll have to wait for the Morphy One or the equivalent.
>
>> If not, is there any way to use encrypted connections? SSH perhaps?
>
>Rod Whitby once told me that an ssh client for the 200LX would require
>long delays between keystrokes.  I hope he was just bluffing
>and trying to
>avoid the hassle of writing it.  <g>

It all makes sense if you think about it. At the very least, if we had an
FPU, we could do 'fast math' on the LX. Encryption requires many
floating-point-operations/second (FLOPS?). I thought that at least the low
bandwidth requirements would overcome the obvious delays imposed by the lack
of fast math abilities in the LX. I know that the CE platforms have an SSH
client available but they also have a much better CPU. It's the OS that
sucks.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 11:14:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Secure HTTP anyone?
In-Reply-To:  <ED29C0E690D4D1118B3E00104B1F4692190267@ntbox.wagweb.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 30 Nov 1999, Ed Padin wrote:

> It all makes sense if you think about it. At the very least, if we had
> an FPU, we could do 'fast math' on the LX. Encryption requires many
> floating-point-operations/second (FLOPS?). I thought that at least the
> low bandwidth requirements would overcome the obvious delays imposed
> by the lack of fast math abilities in the LX. I know that the CE
> platforms have an SSH client available but they also have a much
> better CPU. It's the OS that sucks.

I wonder if the Morphy One or any other Elan SC400-based palmtop will have
enough horsepower to do ssh and/or https.  I mean, when you're on AC and
can run at 66 or 100MHz, probably, but what about on batteries when you're
at 8MHz to keep power consumption down?

The Morphy One comes with an MP3 decoder daughterboard... I wonder if a
"secure Internet" daughterboard would be possible too, if necessary.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 11:30:42 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Backlight in Europe
In-Reply-To:  <199911301210.MAA10160@linux.zrz.TU-Berlin.DE>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

To address the initial question, about backlight availability in Europe:
we do want Tom Rundel to do upgrades, but we're not sure if he'll want to
do screen modifications.  Also we're not sure if we can explain the
procedure over e-mail or if we'll have to meet to train him, or what.  So,
in a nutshell, yes, we'd like to have him doing backlight installations,
but the details haven't been worked out yet.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 29 Nov 1999 22:21:08 -0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ed Keefe <emkeefe@USWEST.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ed Keefe <emkeefe@USWEST.NET>
Subject:      Re: Lotus Metro
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

"Does anyone know what kind of software Lotus Metro is?" asked Stephan
Goeldi.

You're using  the successor to Metro whenever you use System Manager. I
don't recall if Metro did task swapping. Basically it was a PIM.
.ed.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 20:02:44 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Backlight in Europe
Comments: To: Daniel Hertrich <d.hertrich@GMX.DE>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

>> > > But anyway. The LX screen is perfect. When it is dark, I don't LX.
>> >
>> > I even LX in the dark ;-)
>>
>> Anybody who doesn't LX in the dark is clearly not obeying the first law
of
>> palmtop computing: "Use your palmtop at all times and in all situations,
>> because that's what it's for."  <g>


The true LXer lets the sun stand still to continue his lx work!

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 20:06:48 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: Backlight in Europe
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

"But as the most effective feedback from our customers to the manufacturer
is not to buy their products,if we don't think they are good enough,the
inevitable question to yuo Goldie will be,and I am sure you already have
guessed what I will ask:why did you then bought this Siemens S25?? :-)"

The screen is not bad, it is simply not AS GOOD as the lx screen.

"BTW,I had ABB in the beginning of this year,I take it they are also  quoted
on the Swiss stock exchange?"

it should

-goe-

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 20:25:11 +0100
Reply-To:     Stephan Goeldi <stephan.goeldi@datacomm.ch>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Stephan Goeldi <stephan.goeldi@DATACOMM.CH>
Subject:      Re: 200LX WAP?
Comments: To: Franklin Eekhout <franklin@ONLINE.NO>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

wap is just very simple html code

-goe-

-----Original Message-----
From: Franklin Eekhout <franklin@ONLINE.NO>
To: HPLX-L@UCONNVM.UConn.Edu <HPLX-L@UCONNVM.UConn.Edu>
Date: Dienstag, 30. November 1999 11:34
Subject: 200LX WAP?


>Hi all,
>
>Anybody working on a WAP browser for the 200LX? Or is it not possible for
>some or other reason? It would be a nice idea with an 'old' generation cell
>phone.
>
>br
>
>Franklin
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 19:50:34 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              fjkaufman@WORLDNET.ATT.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "F. Kaufman" <fjkaufman@WORLDNET.ATT.NET>
Subject:      Re: WWW/LX won't display web pages
Comments: To: Bill Sprague <eugarps@WORLDNET.ATT.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> Avi wrote:
>
> > ATTGLOBAL has acknowledged they have some problem since
> > they seem to send an empty page (which HV dutifully
> > paints!) There is some ATT newsgroup with many such
> > complaints. They have not produced a solution.
>
> Weird, their sister organization WORLDNET works beutifully on my
> HP200LX with WWW/LX.  Don't these folks share information after
> acquisitions?

Careful what you wish for, Bill, they may and worldnet will get the
global bugs!!!! (g)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 15:23:14 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              buzz_liteyr@YAHOO.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Buzz - <buzz_liteyr@YAHOO.COM>
Subject:      MICQ webpage?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

I'm still trying to locate the website for the DOS version of ICQ.
(MICQ?)

I came across something called TrueICQ when doing a search for "MICQ".
Details are sketchy on the site as to the requirements for the
software.  Is this what I'm looking for?  Thus far the webpage author
has not returned my email.

Thanks again...

Buzz


__________________________________________________
Do You Yahoo!?
Thousands of Stores.  Millions of Products.  All in one place.
Yahoo! Shopping: http://shopping.yahoo.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 15:23:18 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              buzz_liteyr@YAHOO.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Buzz - <buzz_liteyr@YAHOO.COM>
Subject:      Post/LX w/o HV?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

How do I set up Post/LX to work without first having HV start up?  I'd
like to be able to start Post, have it initiate the dial-up... rather
than have HV start first.

Thanks,

Buzz


__________________________________________________
Do You Yahoo!?
Thousands of Stores.  Millions of Products.  All in one place.
Yahoo! Shopping: http://shopping.yahoo.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 21:32:54 +0100
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Martin Bergvill <martin@MOBILPOST.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Martin Bergvill <martin@MOBILPOST.COM>
Subject:      Re: 200LX WAP?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On 30 Nov 1999 03:24:18 -0800, Franklin Eekhout <franklin@ONLINE.NO> wrote:

> Hi all,
>
> Anybody working on a WAP browser for the 200LX? Or is it not possible for
> some or other reason? It would be a nice idea with an 'old' generation cell
> phone.

I asked Andreas about this some time ago..I do not remember if this was
on or offlist. Maybe there are something in the archive.. I will look
to see if I can find something on my machines..

I do not want to put words in Andreas`s mouth, but I think that he said
that wap uses not ppp and therefor you can not log on to a wap server
as you do with your "normal" isp. Therefore the www could not be used
and therefor needed some work with a new communicationmodul to work.

But it would be nice to implement this in some way on the hplx. But you
have to know how the communication between the wapphone and the wapserver
is done. It can be done I am sure. There is a wap browser in the
Ericsson Mc218 which is a Psion 5mx clone. Wap is a open protocol so it
should be info availible on the net..

I guess I have no really need for a wap browser on hplx since I will
have a 7110 soon. But it could be nice to maybe save info I have gotten
throug wap by running "Hwap" a Hv clone on the hplx..

How about it Andreas?..You have a 8810 without wap..maybe you could do a
"Hwap" for the hplx? I know you think that wap are a little "hyped",
but it would be nice to show those Mc218 guys? :-))

There are some wapservices here in Norway, and there will be much
more soon.. I guess this is true for many countries..

If you could have "Hwap" on the hplx you could surf wap pages and also
do "secure things" such as banktransactions and things like that.. Then
you would not need the 386 processor and secure http thingy.. (just a
thought..)

--
Martin Bergvill , Narvik Norway
-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 21:53:33 +0100
Reply-To:     Etienne Lemaire <stelem@attglobal.net>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Etienne Lemaire <etienne.lemaire@PANDORA.BE>
Subject:      Re: Backlight in Europe
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I'm waiting for the backlight to have my machine receive all the upgrades.
So I'll have to sent it to the States?
(which means that I'll have to pay even more taxes and shipping?)

Etienne

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 14:25:27 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Peniel Romanelli <peniel@WEB2000.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Peniel Romanelli <peniel@WEB2000.NET>
Subject:      Re: Post/LX w/o HV?
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Tue, 30 Nov 1999 16:31:02 -0500 (EST)

01h07m46s ago ...
On Tue, 30 Nov 1999, Buzz - wrote:

> How do I set up Post/LX to work without first having HV start up?  I'd
> like to be able to start Post, have it initiate the dial-up... rather
> than have HV start first.

I think there are a couple of ways (ay least).  You could edit www.cfg
to have the first line of the Global section like this

Global
Command=3Ddrive:\path\post.exe

Just substitute the drive and path where you keep post.exe

Or leave www.cfg alone, and launch WWW/LX with a line like

www -d "!post"

This will start Post and wait for you to hit F5 (Online)


HTH

Peniel
------------

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 15:51:56 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Backlight in Europe
In-Reply-To:  <01bf3b74$f70665e0$2d9182c3@default.pandora.be>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 30 Nov 1999, Etienne Lemaire wrote:

> I'm waiting for the backlight to have my machine receive all the
> upgrades. So I'll have to sent it to the States? (which means that
> I'll have to pay even more taxes and shipping?)

We hope to have Tom Rundel do the upgrades in Europe, but it's not firm at
this point.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 18:11:29 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              John J Vanderstel <j_vanderstel@JUNO.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         John J Vanderstel <j_vanderstel@JUNO.COM>
Subject:      Re: acCIS v4.0 access to Compuserve

Hi Bill,

>It works very nicely with HMI.  I use my HP200LX as my primary email and
>forum machine with acCIS 4.0 for CompuServe and WWW/Post/LX for email
and
>newsgroups on my AT&T account.  After December 1, I think, HPHAND will
be
>"Consolidated" with the PALMTOP forum.  Look for the gang in the DOS
Palmtop
>Section.

Thanks for the info and the kind invitation to the forum, Bill.  I'm
looking forward to joining in over on the Compuserve forum, as well. :-)
I just don't know when that will be yet though.  It might take a little
while yet to cancel my other access and to actually get a Compuserve
Classic account setup for use by acCIS, so please keep me posted on what
happens with the forum merger.  As soon as I'm ready, I'll get back with
you via private email for some tips on how to setup acCIS v4.0 to pull in
the resulting forum's posts.

What a great invitation! This is indicative of the close bond we all have
as HPLX users.  Thank you, Bill! :-)

Cheers!

John Vander Stel
Grand Rapids, Michigan

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 16:12:23 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      FLUFF: Re: Backlight in Europe
In-Reply-To:  <009a01bf3b68$c14a68e0$cd20fed4@thinkpad760ed>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 30 Nov 1999, Stephan Goeldi wrote:

> The true LXer lets the sun stand still to continue his lx work!

Heh heh... Now that's one powerful palmtop!

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 18:29:16 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bill Sprague <eugarps@WORLDNET.ATT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bill Sprague <eugarps@WORLDNET.ATT.NET>
Subject:      Re: WWW/LX won't display web pages
Comments: To: fjkaufman@worldnet.att.net
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Fred, wrote re: Bill's suggestion that GlobalATT vs. Worldnet.ATT talk to
eachother.

> Careful what you wish for, Bill, they may and worldnet will get the
> global bugs!!!! (g)

Oops (muffled sounds as Bill slaps his own fingers and claps his hands over
his mouth) .... (VBG)

Bill

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 18:33:37 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bill Sprague <eugarps@WORLDNET.ATT.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bill Sprague <eugarps@WORLDNET.ATT.NET>
Subject:      Re: acCIS v4.0 access to Compuserve
Comments: To: John J Vanderstel <j_vanderstel@JUNO.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

John, you wrote:

> What a great invitation! This is indicative of the close bond we all have
> as HPLX users.  Thank you, Bill! :-)

You are very welcome.  My HP200LX has been my companion since 1994.  Its
hinges are getting loose and the latch doesn't but I guess its owner gets
that way too. (G)

Bill

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 19:18:24 -0500
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Russel Brooks <rlbrooks@POBOX.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Russel Brooks <rlbrooks@POBOX.COM>
Subject:      Re: Backlight
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

I don't think the "need for backlight" issue will be resolved until many
of you actually have them and use them for a while.  While some will say
they're great (if only to justify the cost they spent), I expect to hear
some others say it's nice but they don't use it as much as they
expected.

cheers... Russ  (who is NOT getting backlight for this 1X 32M unit)

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Wed, 1 Dec 1999 00:25:04 +0000
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              chris@AMLOG.DEMON.CO.UK
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Chris Randle <chris@AMLOG.DEMON.CO.UK>
Subject:      Re: Backlight in Europe
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="__next_part__1295395623__"

--__next_part__1295395623__
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

On Tue, 30 Nov 1999, Lars Hedstroem wrote:

> I think, the LX screen is perfect. I never saw a better
> contrast on a LCD
> screen.
>
> I haven't neither seen a better contrast,I pass this question to the
>  other LX users here,have't anyone seen atleast one handheld-contrast
>  as good as the LX?

Yes, I have. A friend of mine had a Psion 3a. I remember
thinking at the time that the contrast was better than the LX.
The 3c that came later wasn't as good. I ought to add that
I've had three 200LXs, and my latest one has noticeably better
contrast than the previous, so perhaps the later 200's were
equal to the 3a's

Finally, I have a Garmin GPS III. The screen on that is
fantastic. The best mono screen I've ever seen. The build
quality is great too. It feels indestructible - almost
military.
--__next_part__1295395623__
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit


Chris Randle (chris@amlog.demon.co.uk)



--__next_part__1295395623__--

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 17:17:44 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Sargeant <david@HPLX.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Sargeant <david@HPLX.NET>
Subject:      Re: Backlight
In-Reply-To:  <HPLX-L%99113019182520@UCONNVM.UCONN.EDU>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

On Tue, 30 Nov 1999, Russel Brooks wrote:

> I don't think the "need for backlight" issue will be resolved until
> many of you actually have them and use them for a while.  While some
> will say they're great (if only to justify the cost they spent), I
> expect to hear some others say it's nice but they don't use it as much
> as they expected.

Anybody who ever has to use the LX in dim light should think it's great.
If not, well... why bother getting one in the first place?

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 16:36:42 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Ain Vale <ainv@RAINBOW.BURNSIDE.POWELLS.COM>
Subject:      C programming and a Sharp organizer.
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

I'm looking for a way to connect my Sharp YO-170 electronic organizer to
the LX.  The Sharp has a PC connector port, and though I don't have the
cable for it yet I think I could probably wire the thing.  The problem
comes in communication.

I really only need a straightforward backup util, something that would
save in the Sharp format and maybe also as delimited text files--
one-way communication only.  I learned the value of backups when my old
organizer was destroyed!

A net acquaintance has written a Windows util for his Sharp, so I know
it can be done, but I'd like to cook up a DOS one for myself.  He wrote
his in C, and that sounds like it might be a good way to go.  Anyone have
any hints or tips on where to get started with this little project?

By the way, if you're wondering, I generally prefer to carry a less
expensive (and thus more expendable) organizer like the Sharp than to use
my LX as one. I save the LX for email, documents, and other more
interesting tasks.  I shudder to think of my LX and all its accessories
falling off of my motorcycle on the highway, but when the Sharp went it
was no big thing. <G>

Thanks in advance for any help you can offer!

Ain Vale
Portland, Oregon, United States

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 16:44:46 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>, jpmurphy1@JUNO.COM
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Joe Murphy <jpmurphy1@JUNO.COM>
Subject:      Re: WWW/LX won't display web pages

Tony,

Thanks a lot for your help with this matter.  At least I know it is not
something that I have done wrong with my setup.

Can anyone suggest a reliable ISP that has pretty much world-wide local
phone number coverage that will work with WWW/LX?  Thanks for any advice
on this.

Joe Murphy
jpmurphy1@juno.com


On Tue, 30 Nov 1999 01:11:42 -0500 Tony Hutchins
<nospam@UNDECIMUS.FREESERVE.CO.UK> writes:
>Tue, 30 Nov 1999 05:58:57 +0000 (GMT)
>
>04h43m09s ago ...
>On Mon, 29 Nov 1999 17:15:48 -0800 (PST), Joe Murphy wrote:
>
>> I am writing hoping to get some help.  I have a registered copy of =
>WWW/LX
>> on my plain vanilla HP200LX, 2Mb memory, 14.4 PCMCIA modem.  My ISP
>is
>> IBM.net (now ATTGLOBAL.net).
>
>The ATTGLOBAL problem has me stumped. I use them here in the UK and HV
>displays pages. I have dialed the New York node 4 times - 2 days it
>worked and 2 it didn't. Some WWW/LX -ATTGLOBAL users in the US report
>HV still works fine.
>
>I agree with your analysis - the page is requested and and a blank
>comes back - I think ATTGLOBAL go to get it from a cache, not
>necessarily the real physical site. Similar problems were reported
>with
>desktop browsers... but I have further reorts that *these* are OK now
>but HV still has a problem.
>
>Certainly some ATTGLOBAL nodes behave strangely now and HV gets blank
>pages!!!  Can vary from day to day. The whole issue is too big for me
>and I have no answer at this time.
>
>Regards, Tony
>
>** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 17:24:45 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: WWW/LX won't display web pages
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

"Bill Sprague" <eugarps@worldnet.att.net> wrote:

> > ATTGLOBAL has acknowledged they have some problem since
> > they seem to send an empty page (which HV dutifully
> > paints!) There is some ATT newsgroup with many such
> > complaints. They have not produced a solution.
>
> Weird, their sister organization WORLDNET works beutifully on my
> HP200LX with WWW/LX.  Don't these folks share information after
> acquisitions?

ATTGLOBAL is the organization formerly known as IBMNET. I
suspect they have no sharing of information.

I posted about this two days ago. This problem really
stumped us. ATT seems to have fixed it for desktops that
use Netscape and MSIE, but I do not know about other
browsers, except HV.

With HV, if you dial-in in the US, then mostly you get
blank pages, no matter which URL you type in. If you dial
in to any international numbers of ATTGLOBAL HV works fine.
Exception: It appears that Turkey node of ATTGLOBAL shares
the same problem as US node.

Helmuth worked with ATT Tech support and made exhaustive
tests - and it shows that dialing into US nides produces
blank pages.

There was a suggestion that it may be the action of some
proxies, but ATT Techies say there is no proxies used. The
further suggestion was that the machines that utilize the
browsers that work somehow have some proxies setup in
background - I really do not understand enough about it to
sound intelligent, forgive me.

So, all I can say is that we are stumped, and it seems ATT
has given up because it works with Netscape and MSIE. I
speculate maybe it has to do with the identification of
the browser? If the ATT Webserver sees a MSIE or Netscape
browsers it dishes up a good page, otherwise it gives a
blank page. Again, this is total speculation, I have no
way to prove it or even test it.

  Avi M. D&A
  http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 17:24:54 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Post/LX w/o HV?
Comments: To: buzz_liteyr@YAHOO.COM
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> How do I set up Post/LX to work without first having HV start up?  I'd
> like to be able to start Post, have it initiate the dial-up... rather
> than have HV start first.
>
> Thanks,
>
> Buzz

Sure, please check the documentation of Post/LX
POSTDOC.TXT. You can start www.exe and have it spawn
post.exe rather than HV. The "default" setup in WWWSETUP
spawns HV, but that can be easily changed.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 17:24:49 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              A Meshar <sponsor@FTEL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         A Meshar <sponsor@FTEL.NET>
Subject:      Re: Gsm coverage in US+more was:Nokia 7110 and WWW/LX: Success
Comments: To: Martin Bergvill <martin@MOBILPOST.COM>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit

> This is something I have never understood.. Why is it that the US is so
> far "behind" when it comes to digital cellular phonenetwork? I am not
> writing this to make fun of anyone. I am just curios why..

Because the US is one country with more than 250 million
people. Several incompatible and competing networks can
easily grow and survive in such a huge market. There would
be no chance for such incompatibility in a market of say 5
or 8 million people total.

The other reason: Many many years ago the 1800MHz band was
allocated to several type of communications. When GSM
started growing they jumped into the 1800 band without
regard to what else was using it in the world. This meant
that GSM in the US could not enjoy international
connectivity and so the development of these phones lagged
in the US, it gave the analog and digital networks a bit
ore time to take over. So GSM is catching up, but it is
problematic because of the multiple bands.

I really do not think it is "behind", just the path of
development was very different. Of course I can say that
Norway is terribly "behind" on analog and non-GSM digital
telephony, see? It is just a different path.

If anything, cellular telephony developed in the US a long
time before it began in Europe, and so the networks had
time to establish themselves. Also, with more experience,
it became obvious that better cellular telephony can be had
using digital and GSM. Europe began to develop these AFTER
it was clear that analog cell phones are problematic. So
there is an advantage, clearly.

> We have a lot of US tvseries and films on tv/cinema here. I have
> always wondered why they used old Motorola flip phones in these
> films/series.

I see you chose to pick the crap from the american culture
and introduce it to your own. Well, you must be "behind" in
your cultural choices :-) ...

> Here in Norway we have had a cellular phonenetwork for ages. First the
> scandinavien NMT system which was analog and then gsm 900/1800 for
> many years now.

And that was developed _years_ after the US market figured
out that analog is no good...

> How are things over there regarding fixed net. Here digital isdn are
> getting widespread. Also broadband internet via cable (tv) are coming.

Same here in the US. One issue they all have is that the
distances are huge (US is a little larger country than
Norway :-) ...) , and ISDN is no good over distances. Also,
we had a phone system in place a looooong time before it
was prevalent and ubiquitous in Norway. It means our
infrastructure is a bit old, adding to the problem of
introducing new technologies.

> There are also some radio network (as your Richoet), but its for
> companys/expencive/in large citys. I would like to have a radiolan on
> my hplx..

I use Ricochet and it is fabulous! I wish it was all over
the US. Metricom, Ricochet's company, just got in together
with some big players and put in some huge amounts of money
to rig many many places, but it is still a tiny bit by
comparison to this huge country.

> I would be gratefull if somebody could take the time answer this..

I did. Thanks for the post.

  Avi

The above is my own private opinion.
For official D&A Software response,
please write to:  support@dasoft.com
and check FAQs at http://www.dasoft.com

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 2027 18:08:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: forward:Trading HP100LX for Palm III

Good thing I REchecked the time zone in the "Date" field
I thought it was Area 51 in "Dallas, Texas, USA"
----Original Message-----
>From: Patrick West <patrickwest@USWEST.NET>
>Date: Friday, November 26, 1999 00:41
>> Subject:Trading HP100LX for Palm III
>> Date: Sat, 20 Nov 1999 23:49:18 +0200
>> From: "Amit Dunsky" <adunsky@yahoo.com>
>> Would like to trade a barnd new 100LX (just been replaced by HP's warranty)
>> 1MB.
>> email: adunsky@tehnologist.com
>> Cellular: +972 (51) 364027
>> Amit.

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 2027 18:09:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: Fluff

And how do connect with NetZero using your HP 200LX ?
What DNS and POP3 settings are you using ?
Or are you using direct dial up to begin with ?
----Original Message-----
>From: Ashwin Balan <husk469@NETZERO.COM>
>Date: Wednesday, November 17, 1999 02:13
>after my short rendezvous with a windows ce device I decided to come back
>to the HP200lx.
>NetZero - Defenders of the Free World
>Get your FREE Internet Access and Email at

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 2027 18:10:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: Backlight in Europe

If you have not missed meals because you were busy on your 200LX
You have not yet began to FULLY use it <G>
----Original Message-----
>From: David Sargeant <david@HPLX.NET>
>Subject: Re: Backlight in Europe
>Date: Monday, November 29, 1999 14:56
>
>On Mon, 29 Nov 1999, Daniel Hertrich wrote:
>
>> > But anyway. The LX screen is perfect. When it is dark, I don't LX.
>>
>> I even LX in the dark ;-)
>
>Anybody who doesn't LX in the dark is clearly not obeying the first law of
>palmtop computing: "Use your palmtop at all times and in all situations,
>because that's what it's for."  <g>

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 2027 18:11:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: Secure HTTP anyone? smart card

Reply to HPLX-L@UCONNVM.UCONN.EDU
Anyone in Europe using their smart card with the 200LX + Travel Floppy ?
Or any similar product
They claim it works under DOS
Smarty is an adapter that's shaped like a 3.5 inch floppy disk. It fits into and works from a PC's 3.5 inch floppy disk drive. To use it as a reader/writer, simply insert a smart card into Smarty, then insert Smarty into your PC's floppy disk drive. http://www.fisc.com/center/smarty.html

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Mon, 8 Nov 2027 18:11:00 -0800
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              thegeeman2@EARTHLINK.NET
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         "J.A. Vart" <thegeeman2@EARTHLINK.NET>
Subject:      Re: Gsm coverage in US+more was:Nokia 7110 and WWW/LX: Success

----Original Message-----
>From: Martin Bergvill <martin@MOBILPOST.COM>
>To: HPLX-L@UCONNVM.UCONN.EDU
>Subject: Gsm coverage in US+more was:Nokia 7110 and WWW/LX: Success
>Date:          Tuesday, November 30, 1999 08:03
>
>On 26 Nov 1999 17:13:03 -0800, A Meshar <sponsor@FTEL.NET> wrote:
>
>> So we can now say that there are 4 cell phones with IR that
>> work? Nokia 8810, Wricsson SH888, Siemens S25, and Nokia
>> 7110? Great result!
>
>If just anyone could test a Ericsson which can use the external
>irdongle I am sure that it will work too with the hplx.
>
>> I will await the full report at 9600.
>> 14.4 and 19.2 is problably slower because it is still too
>> fast, and your network supports no more than 9600 in any
>> case.
>
>See another message from me about speed..
>
>> But this is still a source of great envy on my part.
>> I am in the US and we do not have good GSM coverage,
>> although improving rapidly.
>
>This is something I have never understood.. Why is it that the US is so
>far "behind" when it comes to digital cellular phonenetwork? I am not
>writing this to make fun of anyone. I am just curios why..

The research is done in many countries US$ buys more labor hours than in US - hackers get to work, crackers get caught and go to prison, the companies make the system "secure" and since the real Moollah / Flooz / Money may be made in the US mass market
Ipso Facto: the US$ is still (WILL REMAIN) the world currency
Bye bye Euro <g> ?
INTERNATIONAL FINANCE - shameless plug <g>

>We have a lot of US tvseries and films on tv/cinema here. I have
>always wondered why they used old Motorola flip phones in these
>films/series.

and in the latest release of James Bond, he is using a Windows CE
(I was surprised it worked and did not crash <G>)
and the prior release he had a Nokia - which was a better choice
and closer to the HP 200LX
BTW do you believe everything you in movies ?
They only "plug" the products and make the viewer have a "relation / common point" with the movie star and establish a market:
If he is using my type of computer (which I like) I will pay to go see the movie, and driving a BMW or an Aston Martin then vehicle must be good too, and drinking a Martini, I will go ahead and buy one and drink a Cinzano too <g>
MARKETING - shameless plug

>Lately I have seen newer phones like the Motorola wings in a tv serie
>called "Jag", and also in X-files where they use cellular phones alot.
>I think they use Nokia a lot..

>Here in Norway we have had a cellular phonenetwork for ages. First the
>scandinavien NMT system which was analog and then gsm 900/1800 for
>many years now. "Everybody" from the age 12 and up have gsm phones
>nowadays..(not always a good thing though:-). They sell gsm phone at
>gasstations/groceryshops and at streetcorners.. But this is not the
>case over there?

Now Pac Bell (Pacific Bell http://www.pacbell.net is attempting to market the tri-band callular phone which is "supposed to let you use it all over the world where different versions of GSM are available"

>I belive that pagers are still "hot"/widespread over there?
>
>How are things over there regarding fixed net. Here digital isdn are
>getting widespread. Also broadband internet via cable (tv) are coming.
>
>There are also some radio network (as your Richoet), but its for
>companys/expencive/in large citys. I would like to have a radiolan on
>my hplx..

Ricochet has a hat extended and attempting to get a taxpayer subsidized network installed (not willing to commit / invest corporate fund, check their company site for more details) but they work flawlessly on selected University campuses

>I would be gratefull if somebody could take the time answer this..

Those are my opinions, I have many more versions, I reserve the right to change them and recanting them is not necessary, as those opinions will change by the time I will hit the send key

>Martin Bergvill , Narvik Norway
>-Palmtop friendly sig...

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 21:14:45 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Ascii File Splitter
MIME-version: 1.0

On 1999-11-29 Loic said:
   >I used several times a small dos freeware called hjsplit (15k) and
   >I never had any problem with it. I don't remember where I
   >downloaded that from but if you are interested, I can e-mail you a
   >copy.

I have noted the name of the file and will look for it.  Thank you for the
reference.

Regards,

David Ball


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 21:14:50 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: CloseAll
MIME-version: 1.0

On 1999-11-28 David said:
   >2. Get 200MNU from SUPER. It includes a small program caled 200.com
   >which is an overlay for 200 which accepts a command line parameter,
   >stuffing the relevant key onto the keyboard before starting up the
   >full version of 200. You install it by copying 200.com into your
   >path. In order to start Appmgr
   >c:\bin\200 q

Accomplished and perfected.  Thanks for this great utility.  I'm always
amazed at what I discover to use on this fantastic palmtop.

Regards,

David Ball
mailto:dmb10@swbell.net


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 21:14:55 +0600
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              David Ball <dmb10@SWBELL.NET>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Ball <dmb10@SWBELL.NET>
Subject:      Re: Location of VDE on Palmtop.Net
MIME-version: 1.0

On 1999-11-29 Peniel said:
   >No idea what happened with that link, but the latest version is
   >always available on the VDE home page:
   >http://www.punky.com/vde/

Thanks, I'll try this again a little later and see how it works.

Regards,

David Ball
mailto:dmb10@swbell.net


Net-Tamer V 1.11.2 - Test Drive

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 07:51:17 +1000
Reply-To:     davidb@netmedia.net.il
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         David Becher <davidb@NETMEDIA.NET.IL>
Subject:      Re: Backlight

David Sargeant writes:
> On Mon, 29 Nov 1999, Patrick West wrote:
>
> > I carry a miniflash light.
>
> Still, a backlight weighs less, can't be lost, and provides vastly
> superior illumination than a flashlight.

I carry a min flashlight. Not because I LX in the dark, but because It is a
handy thing to have and a good place to hold the spare batteries for my
palmtop, so they dont get lost!


======================
David Becher
davidb@netmedia.net.il
davidb@cimatron.co.il
======================

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

=========================================================================
Date:         Tue, 30 Nov 1999 20:51:43 -0700
Reply-To:     HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>,
              Bob Meyer <bmeyer@UNION-TEL.COM>
Sender:       HPLX Mailing List <HPLX-L@UCONNVM.UCONN.EDU>
From:         Bob Meyer <bmeyer@UNION-TEL.COM>
Subject:      Re: Ascii File Splitter
Comments: To: David Ball <dmb10@SWBELL.NET>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I use Zip Chunker 3.0 which splits any file type. I think a browser search will
bring it up.

Bob

David Ball wrote:

> I need a reliable ASCII file splitter, so I can split large text files into
> smaller chunks for a text editor I'm using.  Can anyone recommend a good
> file splitter that doesn't lose any of the file contents in the splitting?
>
> TIA,
>
> David Ball
> Net-Tamer V 1.11.2 - Test Drive
>
> ** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

--
+--------------------+-----------------+
|Bob Meyer MSEE K7PPC|Rom 3:23 Rom 6:23|
|bmeyer@union-tel.com|Joh 3:16 Joh 14:6|
|Elk Mountain Wyoming|2Pe 3:9 Rom 10:13|
+--------------------+-----------------+
|   http://w3.union-tel.com/~bmeyer/   |
+--------------------------------------+

** HPLX-L LIST Info at http://www.sp.uconn.edu/~mchem1/HPLX.shtml

