To install my utils and DOS32 simple do the following:

Install DOS32V33.ZIP on a directory called c:\DOS32

Install utils.arj on a directory called c:\32 (if you have already unarjed
 this you must move it there or change the lines below).

In your autoexec.bat the following MUST be added:
  path c:\32\bin;%path%
  set dos32=c:\32
  set include=c:\32\inc

Plus your need the following in your config.sys:
  shell c:\commmand.com /e:2048 /p
This is because the BAT files use a lot of enviroment variables.
They are cleaned up though. All of this is important.

If you install "utils.arj" on another directory other than c:\32 then change the
above lines accordingly.  The dos32 enviroment is used in a lot of batch files
so that they don't have to be changed if you put this on another drive/dir.

The DOS32.exe and DLINK.exe within DOS32V33.ZIP must also be reachable
thru the path but I just copy those two into c:\32\bin.  So go into c:\dos32
  copy D*.exe c:\32\bin
Or just add another path to c:\dos32...
Also debug.obj must be copied into the LIB directory
  copy c:\dos32\debug\debug.obj c:\32\lib

ML.EXE (from MASM V6.11a) must also be in the path to compile.

Now everything is ready...  I hope.

Please read "starter.txt" for explanation of a lot of things you need to
know.


