WD 9710 Windows NT 3.5 Drivers
Release Notes Version 1.01


I. Introduction:
~~~~~~~~~~~~~~~~
	This Windows NT 3.5 Driver is a  Multi-Resolution accelerated driver 
	supporting 8, 16, 24, and 32 bpp(bits per pixel). 


II. Release Identification:
~~~~~~~~~~~~~~~~~~~~~~~~~~~
	The release is identifed by the Driver File Names and contents.

	See Section V for release contents.


II. Features and enhancements:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	Introduction:

	Features Supported:

		- Supports  PCI buses 
		- Multi-resolution support
		- 32-bit linear frame buffer addressing



	HW Acceleration used:

		- Hardware Cursor
		- Bitblt
		- Pattern Bitblt
		- TextOut
		- Raster Operations


	Resolutions Supported:

	640 x 480     8, 16, 32 bpp    (60 Hz, 72 Hz, 75 Hz), non-interlaced
	640 x 480     24 bpp           (60 Hz), non-interlaced
	800 x 600     8, 16, 32 bpp    (56 Hz, 60 Hz, 72 Hz,75 Hz), non-interlaced
	1024 x 768    8, 16 bpp        (60 Hz, 72 Hz, 75 Hz), non-interlaced
							 (44 Hz), interlaced
	1024 x 768    32 bpp           (60 Hz, 72 Hz), non-interlaced
							 (44 Hz), interlaced
	1280 x 1024   8 bpp            (60 Hz), non-interlaced
							 (44 Hz), interlaced
	1280 x 1024   16 bpp           (44 Hz), interlaced
	1600 x 1200   8 bpp            (44 Hz), interlaced


III. Installation instructions:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

- Boot up Windows NT and log in as Administrator
- Select "Control Panel" in "Main" program group
- Select "Display" in  "Control Panel" program group
- Select "Change Display Type..." in "Display Settings"
- Select "Change" in "Display Type"
- Select "Other" in "Select Device" 
- Insert the WD Setup Disk in Drive A or Drive B
- Type in "A:\" or "B:\" in "Install From Disk"                  
- Select "OK"
- Select a Driver from the list of WD Drivers Displayed     
- Select "Install"
- Select "Yes" in "Installing Driver"
- Select "New" in "Windows NT Setup" and then select "Continue".  The 
  WD Driver will be loaded into the system at this point
- Select "OK" in "Installing Driver" and another "OK" to continue
- Select "Restart Now" in "Display Settings Change".  NT will do a 
  Shutdown and then a Restart with the newly installed Driver

IV. Know Problems and Limitations:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	None
	

V. Release Contents:
~~~~~~~~~~~~~~~~~~~~
Date        Size    File
~~~~        ~~~~    ~~~~
08/14/95       5    DISK1
09/18/95   3,140    NT97R10.TXT
08/14/95  29,610    OEMSETUP.INF
08/14/95  37,888    WD97R10.DLL
08/14/95  36,128    WD97R10.SYS



9710 Windows NT Release Notes
________________________________________________________________________

NOTICE: Copyright 1994, 1995 Western Digital Corporation. 
Information furnished in this publication is believed to be accurate 
and reliable; however, no responsibility is assumed for inaccuracies 
or for the information's use. 
Product features and technical specifications are subject to change.

NT97R10.TXT        Created 08/23/94
Revision: 1.01     Modified 09/19/95 10:05 AM 




