   Ŀ
                      Installation for LANtastic v 6.0                     
   


   1. Install LANtastic 6.0 as instructed by Artisoft.  When you are asked to
      select a network driver, choose "NDIS SUPPORT FOR NETWORK ADAPTERS".
      Afterwards, insert the driver disk in drive 'B' and type its path when
      asked for the NDIS Driver Directory:  B:\NDIS2

   2. When you finish the installation, review the following files to make sure
      that it contains the appropriate commands:

      \CONFIG.SYS
      ===========
      :
      Device=c:\lantasti\protman.dos /i:c:\lantasti
      Device=c:\lantasti\UM9008.DOS

      \AUTOEXEC.BAT
      =============
      :
      call c:\lantasti\startnet.bat

      \LANTASTI\STARTNET.BAT
      ======================
      :
      Loadhigh AI-NDIS Bind_To=UN9008_NIF
      AILANBIO @Startnet.cfg
      :

      \LANTASTI\PROTOCOL.INI
      ======================
      [PROTMAN]
         DRIVERNAME = PROTMAN$
         DYNAMIC = YES

      [UM9008_NIF]
         Drivername = UM9008$

