           ****************************************
           *   EIDE2300plus Windows 95 MiniPort   *
           *     ATAPI Driver (Testing Only)      *
           ****************************************

   This driver is a test version for Windows 95 PRE-RELEASE Final,
   not a final release version. Promise Technology will release
   the next final version when MicroSoft releases Windows 95 Final
   version.

   Please contact Promise if you find any problem or trouble 
   with this driver.


   Please follow the steps below to install the Windows 95 driver:


Promise Technology Inc. EIDE2300 Series VL-IDE 
Adapter Driver Installation
-----------------------------------------------

Remove existing IDE driver:

  1) Double click on My Computer icon.

  2) From the My Computer, double click on "Control Panel".

  3) From the Control Panel, double click on "System".

  4) From the System Properties, double click "Device Manager".

  5) From the System Properties, double click "Hard Disk 
     Controllers".

  6) You will find one or two drivers following "Hard disk 
     controllers". Choose it and click "Remove".

  7) Click "OK".

  8) Because you need to install the new device driver, don't 
     choose "Restart Computer".



EIDE2300plus EIDE driver first or new version install :

  1) From the Control Panel, double click on "Add New Hardware".

  2) From Add New Hardware Wizard, click on "Next>".

  3) From Add New Hardware Wizard, double click on "Hard Disk  
     Controllers".

  4) From Add New Hardware Wizard, click on "Have Disk".

  5) Key in "A:\WIN95" or the directory where the driver is in.

  6) Click "OK".

  7) Choose "Promise EIDE2300+ ATAPI IDE MiniPort Adapter 
     PTIVGAPI".

  8) Click "Next>".

  9) From Add New Hardware Wizard, click on "Next>".

 10) From Copying Files, click on "OK".

 11) If no conflict is reported, from Add New Hardware Wizard, 
     click on "Finish".



EIDE2300plus EIDE driver install in second port or reinstall:

  1) From the Control Panel, double click on "Add New Hardware".

  2) From Add New Hardware Wizard, click on "Next>".

  3) From Add New Hardware Wizard, double click on "Hard Disk 
     Controllers".

  4) From Add New Hardware Wizard, choose "Promise Technology 
     Inc." in Manufacturers.

  5) Choose "Promise EIDE2300+ ATAPI IDE MiniPort Adapter 
     PTIVGAPI".

  6) Click "Next>".

  7) From Add New Hardware Wizard, click on "Next>".

  8) If no conflict is reported from Add New Hardware Wizard, 
     click on "Finish".



Choose Correct Configuration for each IDE driver and 
Restart Computer:

  1) From the Control Panel, double click on "System".

  2) From the System Properties, double click "Device Manager".

  3) From the System Properties, double click "Hard Disk 
     Controllers".

  4) You will find one or two drivers following "Hard Disk 
     Controllers",

  5) From System Properties, double click on "Promise EIDE2300+ ..".

  6) From System Properties, click on "Resource".

  7) Click correct configuration: "Basic Configuration 0" or 
     "Basic Configuration 1".  The driver for the primary port should 
     be "Basic Configuration 0" and the driver for the secondary port
     should be "Basic Configuration 1".

  8) Click "OK".

  9) Choose "Original Configuration (Current)" ON.

  10) Shutdown or restart computer.



Promise Technology Inc. EIDE2300 Series VL-IDE Adapter 
Driver Troubleshooting:
--------------------------------------------------------------
   1) When you restart the computer, check "Hard Disk Controllers" 
      in "System Properties". This will tell you if the EIDE2300+ 
      driver is installed correctly or not. If it is not correct 
      reconfigure or install it again.

   2) If you have more than 3 hard drives (or want to use a drive
      letter after E:), add LASTDRIVE=Z in CONFIG.SYS.

   3) When you shutdown the system, if you do not see the 
      "OK To Restart Computer <ALT+CTRL+DEL>" message for a long time, 
      press <Enter> two or three times.

   4) You can install a different driver for Primary and 
      Secondary IDE port, and each port needs a driver to support 
      it. For example:
      EIDE2300+ driver installed for port 0X1Fx(Primary IDE),
      General ESDI/IDE driver installed for port 0X17x(Secondary 
      IDE).
