
              UltraCD CD-ROM cache driver V2.10 Quick Guide
              =============================================
                        (for MS-DOS and Windows)

UltraCD Overview :
===================

     UltraCD is a professional CD-ROM cache driver that enhances the access
  speed of CD-ROM drives up to 30 times, and it can be installed in 30 
  seconds. 

     UltraCD supports MS-DOS and Windows, compatible to AT-BUS, SCSI-BUS 
  and all double speed CD-ROM drives. It incorporated a Windows control 
  panel, an easy-to-use installation program, an on-line help facility,
  a status reporter, unload and other capabilities.

System requirement :
====================

  To get the benefit from UltraCD, you need :

  (1)  A CD-ROM drive. (AT-bus, SCSI-bus or double speed drives)
  (2)  MS-DOS 3.0 or above
  (3)  At least 256 KB of extended memory.

UltraCD installation :
=======================

  To install UltraCD, use next command at MS-DOS :

  A:\>  UltraCD  /SETUP

  Follow UltraCD to complete the installation.

Run UltraCD in Windows :
=========================

  UltraCD can be executed from Program Manager or File Manager of Windows. 
  Please refer to Windows user guide for more information.

UltraCD command syntax :
=========================

  1.   > UltraCD /SETUP	: Install UltraCD.
  2.   > UltraCD [size]	: Load UltraCD into system.
  3.   > UltraCD /UN       : Unload UltraCD from system.
  4.   > UltraCD /?        : Display UltraCD help messages.
  5.   > UltraCD /ST       : Display status and statistical report.
  6.   > UltraCD /ON       : Turn on UltraCD function.
  7.   > UltraCD /OFF      : Turn off UltraCD function.
  8.   > UltraCD /MAX      : Set to MAX caching mode. 
  9.   > UltraCD /MIN      : Set to Min caching mode. 
 10.   > UltraCD /FLUSH	: Flush UltraCD.


  Please refer to UltraCD User Guide for more information.
