* Windows 3.1 SVGA Drivers for 2100 - 2 of 2

*** Requires High Density Disk ***

These drivers enable the user to run several software applications
under the Cirrus Logic video controller's Super VGA screen modes on
the TANDY 2100 computer.

NOTES:
   * This drivers disk is Disk 2 of a two disk set. Make sure that the
     drivers from Disk 1 of this set are installed (as per the 
     installation instructions in the README.DOC file on Disk 1) before 
     the installation from this disk is started.


This disk contains the following files--

   DISK.ID       METER.DLL      INSTALL.EXE   OEMSETUP.INF
   VGALOGO.RL_   WIN.CN_        VDD542X.386   AVGA.3GR
   VGACOLOR.2GR  INSTALL.INF    README.TXT

   SYSTEM <DIR>
   EGA40850.FO_  EGA80850.FO_   CGA40850.FO_  CGA80850.FO_
   CGA40WOA.FO_  VGAFIX.FO_     VGAOEM.FO_    VGASYS.FO_ 
   CGA80WOA.FO_  EGA40WOA.FO_   EGA80WOA.FO_  SSERIFE.FO_
   SERIFE.FO_    COURE.FO_      SYMBOLE.FO_   SMALLE.FO_
   ROMAN.FO_     SCRIPT.FO_     MODERN.FO_    TMSRE.FON
   HELVE.FON     256_1024.DRV   64K_800.DRV   8514FIX.FO_
   8514OEM.FO_   8514SYS.FO_    SSERIFF.FO_   16M_640.DRV
   SERIFF.FO_    COURF.FO_      SYMBOLF.FO_   SMALLF.FO_
   16_1280.DRV   VDD542X.386    AVGA.3GR      SETRES.INI
   VGA850.FO_    VGA860.FO_     VGA861.FO_    VGA863.FO_
   VGA865.FO_

   SETRES <DIR>
   SETRES.HLP
   SETRES.EXE


The installation instructions and other information regarding these drivers
are included in the README.DOC file on Disk 1. In order to view the
README.DOC file, insert Disk 1 in Drive A. At the C:\> prompt, type in
the following--

   TYPE A:README.DOC | MORE

and press <Enter>. This command lets you view the README.DOC file one
screen at a time. (Press <SPACEBAR> to go to the next screen.)

NOTE:
   * The installation instructions for drivers for Windows 3.1 are on
     Page 14 of the README.DOC file of DISK ONE.


NOTE: In order to obtain a printout of this README.TXT file, make
      sure your printer is switched on, is on line, and at the
      C:\> prompt, type the following command--

         PRINT A: README.TXT

      and press <Enter>.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."
