  IDE Drivers for Novell Version 3.11

NOVELL Netware requires hard drives to be set to a specific type
such as "Hard Drive Type 17". Setup programs that have options
such as "Auto", "User Defined", or "Non Standard" will prevent
NOVELL from seeing the hard drive correctly. These IDE drivers
correct this situation so that NOVELL can recognize the
above-mentioned hard drives.


This disk contains the following files--

   IDE.DSK
   README.TXT
   IDEREAD.DOC


In order to obtain a printout of this README.TXT file, make sure
your printer is switched on, is on line, insert this disk in Drive A,
and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.


Additional information on these drivers is available in the
IDEREAD.DOC file on this disk. In order to obtain a printout of this
file, make sure your printer is switched on, is on line, insert this
disk in Drive A, and at the C:\> prompt, type the following--

   PRINT A:IDEREAD.DOC

and press <Enter>.


INSTALLATION

1.  Start up your computer.

2.  Insert this diskette in Drive A.

3.  Insert the NOVELL 3.11 Disk Drivers Diskette in Drive B.

4.  At the C:\> prompt, type in

       DEL B:IDE386.DSK

    and press <Enter>.

5.  Type in

       COPY A:IDE.DSK B:

    and press <Enter>.

6.  Install NOVELL Netware as per the instructions in NOVELL.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."